Skip to contentSkip to conversation

[Fwd: Re: Problem regarding CA0106]

Fwd: Re: Problem regarding CA0106 Travis Place 1 participant 1 message Jun 16, 2008

lore
Share & tools
lore
#0 lore raw
Quoted 20 lines · Takashi Iwai

At Sat, 14 Jun 2008 03:18:33 +1000,

Quoted 18 lines · Travis Place

Just been speaking with a guy in #alsa about the problems with his "MSI K8N Diamond MB" which has an onboard "SB Live 24bit" or "Audigy".

While looking through ca0106_main.c in GIT, i saw the following section:

/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */

	 /* SB0438
	  * CTRL:CA0106-DAT
	  * ADC: WM8775SEDS
	  * DAC: CS4382-KQZ
	  */
	 { .serial = 0x10091462,
	   .name   = "MSI K8N Diamond MB [SB0438]",
	   .gpio_type = 2,
	   .i2c_adc = 1 } ,
Quoted 7 lines
Quoted 3 lines

For this guys sound to work, we had to change the serial line to:

	 { .serial = 0x10091102,

Does it mean that this number 1009:1102 is missing, or a wrong 1009:1462 entry matches with his hardware?

Well, it appears to me (due to another report filed previously) that the motherboard is a 'newer revision' and has a different ID for the soundcard.

Quoted 3 lines

In the former case, it happens often. We just need to add a new entry for the newer model. In the latter case, it's odd.

I think that adding the new ID to the driver wont cause any immediate problems. The old value (1009:1462) should remain, until we can confirm it against another K8N Diamond motherboard (although im not sure how common these boards are).

Quoted 8 lines

thanks,

Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Thanks,
Travis Place

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel