[Fwd: Re: Problem regarding CA0106]
Quoted 20 lines · Takashi Iwai
At Sat, 14 Jun 2008 03:18:33 +1000,
Quoted 18 lines · Travis Place
Just been speaking with a guy in #alsa about the problems with his "MSI K8N Diamond MB" which has an onboard "SB Live 24bit" or "Audigy".
While looking through
ca0106_main.cin GIT, i saw the following section:/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */
/* SB0438 * CTRL:CA0106-DAT * ADC: WM8775SEDS * DAC: CS4382-KQZ */ { .serial = 0x10091462, .name = "MSI K8N Diamond MB [SB0438]", .gpio_type = 2, .i2c_adc = 1 } ,
Quoted 7 lines
Quoted 3 lines
For this guys sound to work, we had to change the serial line to:
{ .serial = 0x10091102,Does it mean that this number 1009:1102 is missing, or a wrong 1009:1462 entry matches with his hardware?
Well, it appears to me (due to another report filed previously) that the motherboard is a 'newer revision' and has a different ID for the soundcard.
Quoted 3 lines
In the former case, it happens often. We just need to add a new entry for the newer model. In the latter case, it's odd.
I think that adding the new ID to the driver wont cause any immediate problems. The old value (1009:1462) should remain, until we can confirm it against another K8N Diamond motherboard (although im not sure how common these boards are).
Quoted 8 lines
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Thanks,
Travis Place
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel