mlmmj-1.2.16-PRE1 released
Hi list,
After a huge delay, the next mlmmj release is just around the corner. This prerelease fixes some bugs, adds a few features and a translation. Thanks a lot to all the contributers. Please download and test it. If I haven't missed anything, a release candidate will follow soon.
http://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.bz2d0d4881f33e4d6379d363a01542c67ac
http://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.gz019df5be4475408b26415f03e8cf2722
The following changes have been made since mlmmj-1.2.15:
o Added support for static bounce addresses (Thomas Jarosch)
o Added a sanity check in mlmmj-receive-strip (Chris Webb)
o Added miscellaneous sanity checks (Thomas Jarosch)
o Disabled digest mails when 'noarchive' is set (Thomas Jarosch)
o Added Russian listtexts (Nikolay Derkach)
o Fixed mmap()ing of zero-sized files (Robin H. Johnson)
o Fixed mlmmj-recieve [sic] for architectures where sizeof(int) and sizeof(char *) differ
o Added support for the 'originalmail' keyword (Sascha Sommer)
o Merged various changes to the web interface from Franky Van Liedekerke
Have I missed any patches?
The following listtext files are missing. Can somebody translate them?
cz/listfaq
cz/maxmailsize
cz/sub-deny-digest
cz/sub-deny-nomail
cz/submod-moderator
cz/submod-requester
cz/sub-subscribed
cz/unsub-notsubscribed
de/listfaq
de/sub-deny-digest
de/sub-deny-nomail
es/maxmailsize
es/sub-deny-digest
es/sub-deny-nomail
es/submod-moderator
es/submod-requester
fr/listfaq
fr/maxmailsize
fr/sub-deny-digest
fr/sub-deny-nomail
fr/submod-moderator
fr/submod-requester
it/listfaq
it/maxmailsize
it/sub-deny-digest
it/sub-deny-nomail
it/submod-moderator
it/submod-requester
nl/maxmailsize
In addition, the following is missing in the RU translation: "Below this line are the first 100 lines of the message up for moderation"
And this is missing in FR, IT, NL and RU: "Below this line are the first 100 lines of the denied message"
Can somebody translate it?
Thanks for your patience,
Morten
Signature · 3 lines
Morten K. Poulsen <[email protected]> CTO, FableTech http://fabletech.com/
Hi Morten.
Quoted 14 lines · Morten K. Poulsen
The following changes have been made since mlmmj-1.2.15:
o Added support for static bounce addresses (Thomas Jarosch)
o Added a sanity check in mlmmj-receive-strip (Chris Webb)
o Added miscellaneous sanity checks (Thomas Jarosch)
o Disabled digest mails when 'noarchive' is set (Thomas Jarosch)
o Added Russian listtexts (Nikolay Derkach)
o Fixed mmap()ing of zero-sized files (Robin H. Johnson)
o Fixed mlmmj-recieve [sic] for architectures where sizeof(int) andsizeof(char *)differ
o Added support for the 'originalmail' keyword (Sascha Sommer)
o Merged various changes to the web interface from Franky Van Liedekerke
Quoted 1 line
Have I missed any patches?
I send two patches to the list on Oct. 14th, would it be possible to get these included ?
I already have the patch for mlmmj-recieve in use at two sites, and haven't had any issues with them.
I'm willing to write some documentation on setting postfix up to use this in the mlmmj documentation.
Best Regards
Niki Guldbrand
Not sure if this is the appropriate place to mention this, but I just built the PRE1 mlmmj-recieve-strip proggy, and I have a couple of pieces of feedback there.
One is that it doesn't build when you say "make". You need to say "make mlmmj-recieve-strip".
The other is that what I'm really dying for is not a list of mime types to disallow, but a list of mime types to allow. Specifically, I only want to allow text/plain.
But here's the last, annoying part. :)
I want one user in particular to be able to bypass this stripping stage, because she attaches the valuable NUEA/UTA job list to her emails, and we're all agreed that it's worth an exception.
I have a mailing list of about 500 people, mostly entertainment industry people (producers, directors, writers, actors), and I use mlmmj for it. One of the biggest headaches, besides moderation, a necessary evil to improve the signal-to-noise ratio, is dealing with users who don't know how to send plain text emails.
Most can be taught, but not all of them. They all get incredibly frustrated when they can't send an email out, and sometimes they're dying to send emergency emails about how they need such and such a prop, location, or person to help with a shoot right away.
Is there a better way to handle this?
=-ddt->
Quoted 94 lines · Morten K. Poulsen
Hi list,
After a huge delay, the next mlmmj release is just around the corner. This prerelease fixes some bugs, adds a few features and a translation.
Thanks a lot to all the contributers. Please download and test it. If I
haven't missed anything, a release candidate will follow soon.http://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.bz2
d0d4881f33e4d6379d363a01542c67achttp://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.gz
019df5be4475408b26415f03e8cf2722The following changes have been made since mlmmj-1.2.15:
o Added support for static bounce addresses (Thomas Jarosch)
o Added a sanity check in mlmmj-receive-strip (Chris Webb)
o Added miscellaneous sanity checks (Thomas Jarosch)
o Disabled digest mails when 'noarchive' is set (Thomas Jarosch)
o Added Russian listtexts (Nikolay Derkach)
o Fixed mmap()ing of zero-sized files (Robin H. Johnson)
o Fixed mlmmj-recieve [sic] for architectures where sizeof(int) andsizeof(char *)differ
o Added support for the 'originalmail' keyword (Sascha Sommer)
o Merged various changes to the web interface from Franky Van LiedekerkeHave I missed any patches?
The following listtext files are missing. Can somebody translate them?
cz/listfaq
cz/maxmailsize
cz/sub-deny-digest
cz/sub-deny-nomail
cz/submod-moderator
cz/submod-requester
cz/sub-subscribed
cz/unsub-notsubscribedde/listfaq
de/sub-deny-digest
de/sub-deny-nomailes/maxmailsize
es/sub-deny-digest
es/sub-deny-nomail
es/submod-moderator
es/submod-requesterfr/listfaq
fr/maxmailsize
fr/sub-deny-digest
fr/sub-deny-nomail
fr/submod-moderator
fr/submod-requesterit/listfaq
it/maxmailsize
it/sub-deny-digest
it/sub-deny-nomail
it/submod-moderator
it/submod-requesternl/maxmailsize
In addition, the following is missing in the RU translation: "Below this
line are the first 100 lines of the message up for moderation"And this is missing in FR, IT, NL and RU: "Below this line are the first
100 lines of the denied message"Can somebody translate it?
Thanks for your patience,
MortenSignature · 3 lines
Morten K. Poulsen <[email protected]> CTO, FableTech http://fabletech.com/
Hi Franky,
Quoted 5 lines · Franky Van Liedekerke
The approximate translation for this line in NL:
"Hieronder vindt u de eerste 100 lijnen van het geweigerd bericht"
In attach some NL listtext files.
Thanks! I've committed your texts.
Morten
Signature · 3 lines
Morten K. Poulsen <[email protected]> CTO, FableTech http://fabletech.com/
Hi Niki,
Quoted 2 lines · Niki Guldbrand
I send two patches to the list on Oct. 14th, would it be possible to get these included ?
Sorry, I totally forgot about them.
Christian Laursen reviewed (against his will... It's not Perl) and committed the php-web-admin patch.
I have reviewed and committed the Postfix pipe backend support patch.
Quoted 2 lines
I'm willing to write some documentation on setting postfix up to use this in the mlmmj documentation.
That would be great, please do.
Morten
Signature · 3 lines
Morten K. Poulsen <[email protected]> CTO, FableTech http://fabletech.com/
2008/10/31 Morten K. Poulsen <[email protected]>:
Quoted 1 line
Have I missed any patches?
Hi, I posted IT files on this list some time ago.
The current ones are incorrect (break headers) and incomplete (based on a previous version).
Please check my post and feel free to ask me for changes.
Bye
Fabio
Hi Dave,
Quoted 1 line · Dave Taylor
Not sure if this is the appropriate place to mention this
It is.
Quoted 2 lines
One is that it doesn't build when you say "make". You need to say "make mlmmj-recieve-strip".
Did you configure with --enable-recieve-strip ?
Quoted 3 lines
The other is that what I'm really dying for is not a list of mime types to disallow, but a list of mime types to allow. Specifically, I only want to allow text/plain.
That part is easy, if you don't need to strip anything else. Just put the following in control/access
allow Content-Type: text/plain
Quoted 1 line
But here's the last, annoying part. :)
Damn, I knew it :)
Quoted 3 lines
I want one user in particular to be able to bypass this stripping stage, because she attaches the valuable NUEA/UTA job list to her emails, and we're all agreed that it's worth an exception.
allow From: [email protected]
allow Content-Type: text/plain
Quoted 5 lines
I have a mailing list of about 500 people, mostly entertainment industry people (producers, directors, writers, actors), and I use mlmmj for it. One of the biggest headaches, besides moderation, a necessary evil to improve the signal-to-noise ratio, is dealing with users who don't know how to send plain text emails.
You probably need the support in mlmmj-recieve-strip. Thet program is written by Sascha Sommer. Perhaps he can help you? It sounds like a very useful feature.
...
Quoted 1 line
Is there a better way to handle this?
Perhaps you could pipe the mail through something like this, before delivering it to mlmmj?
http://www.polarhome.com:793/~gustedt/normail.html
You will have to do some tricks to allow your super user to send multipart mails, though.
Morten
Signature · 3 lines
Morten K. Poulsen <[email protected]> CTO, FableTech http://fabletech.com/
Hi Fabio,
Quoted 1 line · Fabio Busatto
Hi, I posted IT files on this list some time ago.
Sorry, I forgot about them. Good thing I have my development environment up and running again, so I won't have to make another catch-up round like this one.
Quoted 2 lines
The current ones are incorrect (break headers) and incomplete (based on a previous version).
Yeah, I can see that. The headers have been broken in the Italian translation for three years.
Thanks for fixing it, and bringing the translation up to date.
Quoted 1 line
Please check my post and feel free to ask me for changes.
How do you say "Below this line are the first 100 lines of the denied message" in Italian? It is needed for Sascha Sommer's better (more verbose) rejection mails.
Morten
Signature · 3 lines
Morten K. Poulsen <[email protected]> CTO, FableTech http://fabletech.com/
Quoted 3 lines · Morten K. Poulsen
How do you say "Below this line are the first 100 lines of the denied message" in Italian? It is needed for Sascha Sommer's better (more verbose) rejection mails.
It is "sotto questa riga le prime 100 linee del messaggio negato". Bye
-fabio
Quoted 5 lines · Fabio Busatto
Quoted 3 lines
How do you say "Below this line are the first 100 lines of the denied message" in Italian? It is needed for Sascha Sommer's better (more verbose) rejection mails.
It is "sotto questa riga le prime 100 linee del messaggio negato".
Grazie!
Morten
Signature · 3 lines
Morten K. Poulsen <[email protected]> CTO, FableTech http://fabletech.com/