Skip to contentSkip to conversation

mlmmj-1.2.16-PRE1 released

DISCUSSION Morten K. Poulsen 4 participants 10 messages Oct 31, 2008 – Nov 2, 2008

lore
Share & tools
lore
#0 lore raw

Hi list,

After a huge delay, the next mlmmj release is just around the corner. This prerelease fixes some bugs, adds a few features and a translation. Thanks a lot to all the contributers. Please download and test it. If I haven't missed anything, a release candidate will follow soon.

http://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.bz2
d0d4881f33e4d6379d363a01542c67ac

http://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.gz
019df5be4475408b26415f03e8cf2722

The following changes have been made since mlmmj-1.2.15:

o Added support for static bounce addresses (Thomas Jarosch)
o Added a sanity check in mlmmj-receive-strip (Chris Webb)
o Added miscellaneous sanity checks (Thomas Jarosch)
o Disabled digest mails when 'noarchive' is set (Thomas Jarosch)
o Added Russian listtexts (Nikolay Derkach)
o Fixed mmap()ing of zero-sized files (Robin H. Johnson)
o Fixed mlmmj-recieve [sic] for architectures where sizeof(int) and sizeof(char *) differ
o Added support for the 'originalmail' keyword (Sascha Sommer)
o Merged various changes to the web interface from Franky Van Liedekerke

Have I missed any patches?

The following listtext files are missing. Can somebody translate them?

cz/listfaq
cz/maxmailsize
cz/sub-deny-digest
cz/sub-deny-nomail
cz/submod-moderator
cz/submod-requester
cz/sub-subscribed
cz/unsub-notsubscribed

de/listfaq
de/sub-deny-digest
de/sub-deny-nomail

es/maxmailsize
es/sub-deny-digest
es/sub-deny-nomail
es/submod-moderator
es/submod-requester

fr/listfaq
fr/maxmailsize
fr/sub-deny-digest
fr/sub-deny-nomail
fr/submod-moderator
fr/submod-requester

it/listfaq
it/maxmailsize
it/sub-deny-digest
it/sub-deny-nomail
it/submod-moderator
it/submod-requester

nl/maxmailsize

In addition, the following is missing in the RU translation: "Below this line are the first 100 lines of the message up for moderation"

And this is missing in FR, IT, NL and RU: "Below this line are the first 100 lines of the denied message"

Can somebody translate it?

Thanks for your patience,
Morten

Signature · 3 lines
Morten K. Poulsen <[email protected]>
CTO, FableTech
http://fabletech.com/
#1 lore raw

Hi Morten.

Quoted 14 lines · Morten K. Poulsen

The following changes have been made since mlmmj-1.2.15:

o Added support for static bounce addresses (Thomas Jarosch)
o Added a sanity check in mlmmj-receive-strip (Chris Webb)
o Added miscellaneous sanity checks (Thomas Jarosch)
o Disabled digest mails when 'noarchive' is set (Thomas Jarosch)
o Added Russian listtexts (Nikolay Derkach)
o Fixed mmap()ing of zero-sized files (Robin H. Johnson)
o Fixed mlmmj-recieve [sic] for architectures where sizeof(int) and sizeof(char *) differ
o Added support for the 'originalmail' keyword (Sascha Sommer)
o Merged various changes to the web interface from Franky Van Liedekerke

Quoted 1 line

Have I missed any patches?

I send two patches to the list on Oct. 14th, would it be possible to get these included ?

I already have the patch for mlmmj-recieve in use at two sites, and haven't had any issues with them.

I'm willing to write some documentation on setting postfix up to use this in the mlmmj documentation.

Best Regards

Niki Guldbrand

#2 lore raw
In reply to Morten K. Poulsen

Not sure if this is the appropriate place to mention this, but I just built the PRE1 mlmmj-recieve-strip proggy, and I have a couple of pieces of feedback there.

One is that it doesn't build when you say "make". You need to say "make mlmmj-recieve-strip".

The other is that what I'm really dying for is not a list of mime types to disallow, but a list of mime types to allow. Specifically, I only want to allow text/plain.

But here's the last, annoying part. :)

I want one user in particular to be able to bypass this stripping stage, because she attaches the valuable NUEA/UTA job list to her emails, and we're all agreed that it's worth an exception.

I have a mailing list of about 500 people, mostly entertainment industry people (producers, directors, writers, actors), and I use mlmmj for it. One of the biggest headaches, besides moderation, a necessary evil to improve the signal-to-noise ratio, is dealing with users who don't know how to send plain text emails.

Most can be taught, but not all of them. They all get incredibly frustrated when they can't send an email out, and sometimes they're dying to send emergency emails about how they need such and such a prop, location, or person to help with a shoot right away.

Is there a better way to handle this?

	=-ddt->
Quoted 94 lines · Morten K. Poulsen

Hi list,

After a huge delay, the next mlmmj release is just around the corner. This prerelease fixes some bugs, adds a few features and a translation.
Thanks a lot to all the contributers. Please download and test it. If I
haven't missed anything, a release candidate will follow soon.

http://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.bz2
d0d4881f33e4d6379d363a01542c67ac

http://mlmmj.mmj.dk/~mortenp/mlmmj-1.2.16-PRE1.tar.gz
019df5be4475408b26415f03e8cf2722

The following changes have been made since mlmmj-1.2.15:

o Added support for static bounce addresses (Thomas Jarosch)
o Added a sanity check in mlmmj-receive-strip (Chris Webb)
o Added miscellaneous sanity checks (Thomas Jarosch)
o Disabled digest mails when 'noarchive' is set (Thomas Jarosch)
o Added Russian listtexts (Nikolay Derkach)
o Fixed mmap()ing of zero-sized files (Robin H. Johnson)
o Fixed mlmmj-recieve [sic] for architectures where sizeof(int) and sizeof(char *) differ
o Added support for the 'originalmail' keyword (Sascha Sommer)
o Merged various changes to the web interface from Franky Van Liedekerke

Have I missed any patches?

The following listtext files are missing. Can somebody translate them?

cz/listfaq
cz/maxmailsize
cz/sub-deny-digest
cz/sub-deny-nomail
cz/submod-moderator
cz/submod-requester
cz/sub-subscribed
cz/unsub-notsubscribed

de/listfaq
de/sub-deny-digest
de/sub-deny-nomail

es/maxmailsize
es/sub-deny-digest
es/sub-deny-nomail
es/submod-moderator
es/submod-requester

fr/listfaq
fr/maxmailsize
fr/sub-deny-digest
fr/sub-deny-nomail
fr/submod-moderator
fr/submod-requester

it/listfaq
it/maxmailsize
it/sub-deny-digest
it/sub-deny-nomail
it/submod-moderator
it/submod-requester

nl/maxmailsize

In addition, the following is missing in the RU translation: "Below this
line are the first 100 lines of the message up for moderation"

And this is missing in FR, IT, NL and RU: "Below this line are the first
100 lines of the denied message"

Can somebody translate it?

Thanks for your patience,
Morten

Signature · 3 lines
Morten K. Poulsen <[email protected]>
CTO, FableTech
http://fabletech.com/
#3 lore raw
In reply to Morten K. Poulsen

Hi Franky,

Quoted 5 lines · Franky Van Liedekerke

The approximate translation for this line in NL:

"Hieronder vindt u de eerste 100 lijnen van het geweigerd bericht"

In attach some NL listtext files.

Thanks! I've committed your texts.

Morten

Signature · 3 lines
Morten K. Poulsen <[email protected]>
CTO, FableTech
http://fabletech.com/
#4 lore raw
In reply to Morten K. Poulsen

Hi Niki,

Quoted 2 lines · Niki Guldbrand

I send two patches to the list on Oct. 14th, would it be possible to get these included ?

Sorry, I totally forgot about them.

Christian Laursen reviewed (against his will... It's not Perl) and committed the php-web-admin patch.

I have reviewed and committed the Postfix pipe backend support patch.

Quoted 2 lines

I'm willing to write some documentation on setting postfix up to use this in the mlmmj documentation.

That would be great, please do.

Morten

Signature · 3 lines
Morten K. Poulsen <[email protected]>
CTO, FableTech
http://fabletech.com/
#5 lore raw
In reply to Morten K. Poulsen

2008/10/31 Morten K. Poulsen <[email protected]>:

Quoted 1 line

Have I missed any patches?

Hi, I posted IT files on this list some time ago.
The current ones are incorrect (break headers) and incomplete (based on a previous version).
Please check my post and feel free to ask me for changes.

Bye
Fabio

#6 lore raw
In reply to Morten K. Poulsen

Hi Dave,

Quoted 1 line · Dave Taylor

Not sure if this is the appropriate place to mention this

It is.

Quoted 2 lines

One is that it doesn't build when you say "make". You need to say "make mlmmj-recieve-strip".

Did you configure with --enable-recieve-strip ?

Quoted 3 lines

The other is that what I'm really dying for is not a list of mime types to disallow, but a list of mime types to allow. Specifically, I only want to allow text/plain.

That part is easy, if you don't need to strip anything else. Just put the following in control/access

allow Content-Type: text/plain

Quoted 1 line

But here's the last, annoying part. :)

Damn, I knew it :)

Quoted 3 lines

I want one user in particular to be able to bypass this stripping stage, because she attaches the valuable NUEA/UTA job list to her emails, and we're all agreed that it's worth an exception.

allow From: [email protected]
allow Content-Type: text/plain

Quoted 5 lines

I have a mailing list of about 500 people, mostly entertainment industry people (producers, directors, writers, actors), and I use mlmmj for it. One of the biggest headaches, besides moderation, a necessary evil to improve the signal-to-noise ratio, is dealing with users who don't know how to send plain text emails.

You probably need the support in mlmmj-recieve-strip. Thet program is written by Sascha Sommer. Perhaps he can help you? It sounds like a very useful feature.

...

Quoted 1 line

Is there a better way to handle this?

Perhaps you could pipe the mail through something like this, before delivering it to mlmmj?

http://www.polarhome.com:793/~gustedt/normail.html

You will have to do some tricks to allow your super user to send multipart mails, though.

Morten

Signature · 3 lines
Morten K. Poulsen <[email protected]>
CTO, FableTech
http://fabletech.com/
#7 lore raw
In reply to Morten K. Poulsen

Hi Fabio,

Quoted 1 line · Fabio Busatto

Hi, I posted IT files on this list some time ago.

Sorry, I forgot about them. Good thing I have my development environment up and running again, so I won't have to make another catch-up round like this one.

Quoted 2 lines

The current ones are incorrect (break headers) and incomplete (based on a previous version).

Yeah, I can see that. The headers have been broken in the Italian translation for three years.

Thanks for fixing it, and bringing the translation up to date.

Quoted 1 line

Please check my post and feel free to ask me for changes.

How do you say "Below this line are the first 100 lines of the denied message" in Italian? It is needed for Sascha Sommer's better (more verbose) rejection mails.

Morten

Signature · 3 lines
Morten K. Poulsen <[email protected]>
CTO, FableTech
http://fabletech.com/
#8 lore raw
In reply to Morten K. Poulsen
Quoted 3 lines · Morten K. Poulsen

How do you say "Below this line are the first 100 lines of the denied message" in Italian? It is needed for Sascha Sommer's better (more verbose) rejection mails.

It is "sotto questa riga le prime 100 linee del messaggio negato". Bye
-fabio

#9 lore raw
In reply to Morten K. Poulsen
Quoted 5 lines · Fabio Busatto
Quoted 3 lines

How do you say "Below this line are the first 100 lines of the denied message" in Italian? It is needed for Sascha Sommer's better (more verbose) rejection mails.

It is "sotto questa riga le prime 100 linee del messaggio negato".

Grazie!

Morten

Signature · 3 lines
Morten K. Poulsen <[email protected]>
CTO, FableTech
http://fabletech.com/