tg3: Remove unused cfgspc device members
Subsystems (2)
PATCH 3/5 tg3: Remove unused cfgspc device members
This patch removes the pci_bist and pci_hdr_type members from the device structure and removes the code that references them. They are not really used.
The patch rounds out the changes by moving the pci_cmd member to plug a structure hole that would have been created. On 32-bit systems, this movement removes a subsequent structure hole later in the structure. On 64-bit systems though, the movement merely consolidates two holes into one larger hole.
--- drivers/net/tg3.c | 23 ++++++----------------- drivers/net/tg3.h | 4 +--- 2 files changed, 7 insertions(+), 20 deletions(-)
drivers/net/tg3.c +6 -17
@@ -12160,7 +12160,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) { }, };u32 misc_ctrl_reg; -u32 cacheline_sz_reg;u32 pci_state_reg, grc_misc_cfg;u32 val;u16 pci_cmd;
@@ -12330,14 +12329,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)pci_write_config_dword (tp->pdev,TG3PCI_MISC_HOST_CTRL , tp->misc_host_ctrl); -pci_read_config_dword (tp->pdev,TG3PCI_CACHELINESZ , - &cacheline_sz_reg); - - tp->pci_cacheline_sz = (cacheline_sz_reg >>0 ) &0xff ; - tp->pci_lat_timer = (cacheline_sz_reg >>8 ) &0xff ; - tp->pci_hdr_type = (cacheline_sz_reg >>16 ) &0xff ; - tp->pci_bist = (cacheline_sz_reg >>24 ) &0xff ; -if ((GET_ASIC_REV (tp->pci_chip_rev_id) ==ASIC_REV_5704 ) || (GET_ASIC_REV (tp->pci_chip_rev_id) ==ASIC_REV_5714 )) tp->pdev_peer =tg3_find_peer (tp);
@@ -12447,17 +12438,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER; +pci_read_config_byte (tp->pdev,PCI_CACHE_LINE_SIZE , + &tp->pci_cacheline_sz); +pci_read_config_byte (tp->pdev,PCI_LATENCY_TIMER , + &tp->pci_lat_timer);if (GET_ASIC_REV (tp->pci_chip_rev_id) ==ASIC_REV_5703 && tp->pci_lat_timer <64 ) { tp->pci_lat_timer =64 ; - - cacheline_sz_reg = ((tp->pci_cacheline_sz &0xff ) <<0 ); - cacheline_sz_reg |= ((tp->pci_lat_timer &0xff ) <<8 ); - cacheline_sz_reg |= ((tp->pci_hdr_type &0xff ) <<16 ); - cacheline_sz_reg |= ((tp->pci_bist &0xff ) <<24 ); - -pci_write_config_dword (tp->pdev,TG3PCI_CACHELINESZ , - cacheline_sz_reg); +pci_write_config_byte (tp->pdev,PCI_LATENCY_TIMER , + tp->pci_lat_timer); }if (GET_CHIP_REV (tp->pci_chip_rev_id) ==CHIPREV_5700_BX ) {
drivers/net/tg3.h +1 -3
@@ -2676,10 +2676,9 @@ struct tg3 {/* PCI block */ u32 pci_chip_rev_id; +u16 pci_cmd;u8 pci_cacheline_sz;u8 pci_lat_timer; -u8 pci_hdr_type; -u8 pci_bist;int pm_cap;int msi_cap;
@@ -2730,7 +2729,6 @@ struct tg3 {u32 led_ctrl;u32 phy_otp; -u16 pci_cmd;char board_part_number[24 ];#define TG3_VER_SIZE 32
Signature · 1 line
1.5.6.4
From: "Matt Carlson" <[email protected]>
Date: Wed, 17 Dec 2008 18:23:13 -0800
Quoted 10 lines
This patch removes the
pci_bistandpci_hdr_typemembers from the device structure and removes the code that references them. They are not really used.The patch rounds out the changes by moving the
pci_cmdmember to plug a structure hole that would have been created. On 32-bit systems, this movement removes a subsequent structure hole later in the structure. On 64-bit systems though, the movement merely consolidates two holes into one larger hole.
Quoted 3 lines
Signed-off-by Matt Carlson <[email protected]>Signed-off-by Benjamin Li <[email protected]>Signed-off-by Michael Chan <[email protected]>
Applied.