mfd: Initialise WM8350 interrupts earlier
Subsystems (2)
PATCH 1/1 mfd: Initialise WM8350 interrupts earlier
Ensure that the interrupt handling is configured before we do platform specific init. This allows the platform specific initialisation to configure things which use interrupts safely.
Signed-off-by Mark Brown <[email protected]>
--- drivers/mfd/wm8350-core.c | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-)
drivers/mfd/wm8350-core.c +9 -9
@@ -1419,15 +1419,6 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,return ret; } -if (pdata && pdata->init) { - ret = pdata->init (wm8350); -if (ret !=0 ) { -dev_err (wm8350->dev,"Platform init() failed: %d\n" , - ret); - goto err; - } - } -mutex_init (&wm8350->auxadc_mutex);mutex_init (&wm8350->irq_mutex);INIT_WORK (&wm8350->irq_work, wm8350_irq_worker);
@@ -1445,6 +1436,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } wm8350->chip_irq = irq; +if (pdata && pdata->init) { + ret = pdata->init (wm8350); +if (ret !=0 ) { +dev_err (wm8350->dev,"Platform init() failed: %d\n" , + ret); + goto err; + } + } +wm8350_reg_write (wm8350,WM8350_SYSTEM_INTERRUPTS_MASK ,0x0 ); wm8350_client_dev_register(wm8350, "wm8350-codec",
Signature · 1 line
1.5.6.5