Skip to contentSkip to conversation

mfd: Initialise WM8350 interrupts earlier

PATCH New Mark Brown 1 participant 1 message Jan 12, 2009

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 mfd: Initialise WM8350 interrupts earlier

Ensure that the interrupt handling is configured before we do platform specific init. This allows the platform specific initialisation to configure things which use interrupts safely.

---
 drivers/mfd/wm8350-core.c |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)
drivers/mfd/wm8350-core.c +9 -9
index ff1ec82..e5e82c7 100644
@@ -1419,15 +1419,6 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		return ret;
 	}
 
-	if (pdata && pdata->init) {
-		ret = pdata->init(wm8350);
-		if (ret != 0) {
-			dev_err(wm8350->dev, "Platform init() failed: %d\n",
-				ret);
-			goto err;
-		}
-	}
-
 	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
 	INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
@@ -1445,6 +1436,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 	}
 	wm8350->chip_irq = irq;
 
+	if (pdata && pdata->init) {
+		ret = pdata->init(wm8350);
+		if (ret != 0) {
+			dev_err(wm8350->dev, "Platform init() failed: %d\n",
+				ret);
+			goto err;
+		}
+	}
+
 	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
 
 	wm8350_client_dev_register(wm8350, "wm8350-codec",
Signature · 1 line
1.5.6.5