Skip to contentSkip to conversation

Status open patches: 8xxx

U-Boot Applied Wolfgang Denk 8 participants 10 messages Feb 22, 2009 – Mar 10, 2009

lore
Share & tools
lore
#0 lore raw

Dear Kim, Andy & Jon,

I have the following patches still marked as open in my list. Could you please have a look...

8xxx:

11/06 Anton Vorontsov    [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB
12/11 Paul Gortmaker     [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.
12/30 Poonam_Aggrwal-b1  [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)
01/15 hamoshame Lamotek  [U-Boot] MPC8572DS Registered DDR2 support.
01/22 Pieter             [U-Boot] Custom MPC8548 boot using FDT problem
01/22 Scott Wood         Re: [U-Boot] mpc8313erdb: crash in image_print_type()
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
02/05 Valeriy Glushkov   [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
02/10 "Ajeesh Kumar"     U-boot level MPC8548 Ethernet internal/External Loop back testing
02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages
02/12 Becky Bruce        [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Becky Bruce        Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Jon Loeliger       Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/16 Kim Phillips       Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
02/17 Heiko Schocher     [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support
02/17 Heiko Schocher     [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
02/17 Heiko Schocher     [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.
02/17 Kumar Gala         [U-Boot] [PATCH] fsl: Don't spew messages related to PHY fixup of device tree
02/19 Anton Vorontsov    [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx
02/19 Anton Vorontsov    [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
02/19 Anton Vorontsov    [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper
02/19 Anton Vorontsov    [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0
02/19 Anton Vorontsov    [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
02/19 Anton Vorontsov    [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
02/19 Anton Vorontsov    [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value
02/19 Anton Vorontsov    [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support
02/19 Heiko Schocher     [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support
02/19 Heiko Schocher     [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM
02/19 Heiko Schocher     [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c
02/19 Heiko Schocher     [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines
02/19 Heiko Schocher     [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03
02/19 Heiko Schocher     [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
02/19 Heiko Schocher     [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature.

Thanks in advance.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anything free is worth what you pay for it.
#1 lore raw

Hello Wolfgang, Kim,

Quoted 7 lines · Wolfgang Denk

Dear Kim, Andy & Jon,

I have the following patches still marked as open in my list. Could you please have a look...

8xxx:

[...]

Quoted 4 lines
02/17 Heiko Schocher     [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support
02/17 Heiko Schocher     [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
02/17 Heiko Schocher     [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.

This three patches are replaced by v3 version of this patchset -> no longer needed.

bye
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany 
#2 lore raw
In reply to Wolfgang Denk

Dear Wolfgang

Quoted 11 lines · Wolfgang Denk

Dear Kim, Andy & Jon,

I have the following patches still marked as open in my list. Could you please have a look...

8xxx:

11/06 Anton Vorontsov    [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB
12/11 Paul Gortmaker     [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.
12/30 Poonam_Aggrwal-b1  [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)
01/15 hamoshame Lamotek  [U-Boot] MPC8572DS Registered DDR2 support.
01/22 Pieter             [U-Boot] Custom MPC8548 boot using FDT problem

<Snip>

The problem addressed in " 01/22 Pieter [U-Boot] Custom MPC8548 boot
using FDT problem " has been resolved and was a combination on defines in the board.h file and definition in the device tree source. is there something I need to do to resolve the "open patch status"

regards Pieter

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2722 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090223/902067a7/attachment.bin

#3 lore raw
In reply to Wolfgang Denk
Quoted 12 lines · Wolfgang Denk

Dear Kim, Andy & Jon,

I have the following patches still marked as open in my list. Could you please have a look...

8xxx:

02/04 Jon Loeliger       Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
Quoted 8 lines
02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages
02/12 Becky Bruce        [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Becky Bruce        Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Jon Loeliger       Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default

Best regards,

Wolfgang Denk

Wolfgang,

It was my belief that all outstanding 86xx patches had either been Acked-by me and should be picked up by either Andy or Wolfgang, or had been subsumed into other already applied patches.

Becky (or Kumar?),

Could you verify that the 36-bit and address-map related patches are correct in WD's current master head and that you are happy with them? I thought we got them all there, but I could be wrong. Or maybe we need to wait for a set to be picked up with the 85xx tree from Andy still?

Thanks,
jdl

#4 lore raw
Quoted 37 lines · Jon Loeliger
Quoted 25 lines · Wolfgang Denk

Dear Kim, Andy & Jon,

I have the following patches still marked as open in my list. Could you please have a look...

8xxx:

02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add
support to populate addr map based on BATs
02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn:
Change PCI MEM pci bus address
02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set
up outbound pci windows before inbound
02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn:
Clean up PCI mapping concepts

02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-
bit addr map in boot messages
02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set
CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Becky Bruce Re: [U-Boot] [PATCH] MPC86xx: set
CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Jon Loeliger Re: [U-Boot] [PATCH] MPC86xx: set
CONFIG_MAX_MEM_MAPPED to 2G by default

Quoted 3 lines

Best regards,

Wolfgang Denk

Wolfgang,

It was my belief that all outstanding 86xx patches had either been Acked-by me and should be picked up by either Andy or Wolfgang, or had been subsumed into other already applied patches.

Quoted 7 lines

Becky (or Kumar?),

Could you verify that the 36-bit and address-map related patches are correct in WD's current master head and that you are happy with them? I thought we got them all there, but I could be wrong. Or maybe we need to wait for a set to be picked up with the 85xx tree from Andy still?

So, there are only 2 patches of mine outstanding (the third message above is just a note about a dependency).

This one should still apply and needs to be picked up, WD can pick it up directly because it's very small:

Quoted 2 lines
Quoted 2 lines

02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-
bit addr map in boot messages

The second one looks like it won't apply anymore due to a change from Stefan; I will submit a new one that WD can pick up directly as long as it's OK with you.

Cheers,
Becky

#5 lore raw

OK, I have resubmitted the MAX_MEM_MAPPED patch to apply to the current master u-boot tree.

-Becky

Quoted 67 lines · Becky Bruce
Quoted 37 lines · Jon Loeliger
Quoted 25 lines · Wolfgang Denk

Dear Kim, Andy & Jon,

I have the following patches still marked as open in my list. Could you please have a look...

8xxx:

02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add
support to populate addr map based on BATs
02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn:
Change PCI MEM pci bus address
02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set
up outbound pci windows before inbound
02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn:
Clean up PCI mapping concepts

02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-
bit addr map in boot messages
02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set
CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Becky Bruce Re: [U-Boot] [PATCH] MPC86xx: set
CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Jon Loeliger Re: [U-Boot] [PATCH] MPC86xx: set
CONFIG_MAX_MEM_MAPPED to 2G by default

Quoted 3 lines

Best regards,

Wolfgang Denk

Wolfgang,

It was my belief that all outstanding 86xx patches had either been Acked-by me and should be picked up by either Andy or Wolfgang, or had been subsumed into other already applied patches.

Quoted 7 lines

Becky (or Kumar?),

Could you verify that the 36-bit and address-map related patches are correct in WD's current master head and that you are happy with them? I thought we got them all there, but I could be wrong. Or maybe we need to wait for a set to be picked up with the 85xx tree from Andy still?

So, there are only 2 patches of mine outstanding (the third message above is just a note about a dependency).

This one should still apply and needs to be picked up, WD can pick it up directly because it's very small:

Quoted 2 lines
Quoted 2 lines

02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-
bit addr map in boot messages

The second one looks like it won't apply anymore due to a change from Stefan; I will submit a new one that WD can pick up directly as long as it's OK with you.

Cheers,
Becky
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#6 lore raw
In reply to Becky Bruce
Quoted 5 lines · Becky Bruce

This one should still apply and needs to be picked up, WD can pick it up directly because it's very small:

Quoted 2 lines
Quoted 2 lines

02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate
36-bit addr map in boot messages

OK, sounds fine by me. Thanks.

Quoted 3 lines

The second one looks like it won't apply anymore due to a change from Stefan; I will submit a new one that WD can pick up directly as long as it's OK with you.

Yep, consider it pre-Ack'ed. :-)

Thanks,
jdl

#7 lore raw
In reply to Wolfgang Denk
Quoted 5 lines · On Sun, 22 Feb 2009 01:00:14 +0100 Wolfgang Denk <[email protected]> wrote:

I have the following patches still marked as open in my list. Could you please have a look...

8xxx:
11/06 Anton Vorontsov [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB

this is apparently pending resubmission from its author, Anton:

http://lists.denx.de/pipermail/u-boot/2008-November/043348.html:

"Please don't queue this patch yet. I'll send an updated version soon, that will also define CFG_BOOTM_LEN (so that bootm command will able to gunzip 16MB images)."

(Anton cc'd)

Quoted 1 line

01/22 Scott Wood Re: [U-Boot] mpc8313erdb: crash in image_print_type()

this isn't a patch; it's a thread that concludes that manual relocation is needed.

Quoted 1 line

02/05 Valeriy Glushkov [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334

this is commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5 in the u-boot-mpc83xx tree.

Quoted 1 line

02/16 Kim Phillips Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334

I believe this is me saying I applied it to u-boot-mpc83xx, just as I did above :).

Quoted 3 lines
02/17 Heiko Schocher     [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support
02/17 Heiko Schocher     [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
02/17 Heiko Schocher     [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.

As he already mentioned, Heiko has already resubmitted a 3rd version of these...

Quoted 7 lines
02/19 Anton Vorontsov    [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx
02/19 Anton Vorontsov    [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
02/19 Anton Vorontsov    [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper
02/19 Anton Vorontsov    [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0
02/19 Anton Vorontsov    [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
02/19 Anton Vorontsov    [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
02/19 Anton Vorontsov    [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value
Quoted 8 lines
02/19 Anton Vorontsov    [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support
02/19 Heiko Schocher     [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support
02/19 Heiko Schocher     [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM
02/19 Heiko Schocher     [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c
02/19 Heiko Schocher     [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines
02/19 Heiko Schocher     [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03
02/19 Heiko Schocher     [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
02/19 Heiko Schocher     [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature.

...here. And Anton's are the latest submitted to the list and I intend on picking them up and sending you a pull request soon.

Kim

#8 lore raw

Dear Kim,

In message <[email protected]> you wrote:
...

Quoted 2 lines

...here. And Anton's are the latest submitted to the list and I intend on picking them up and sending you a pull request soon.

Thanks for the detailed report.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Lispers are among  the  best  grads  of  the  Sweep-It-Under-Someone-
Else's-Carpet  School of Simulated Simplicity. [Was that sufficiently
incendiary? :-)]  - Larry Wall in <[email protected]
Applied
#9 lore raw
In reply to Wolfgang Denk

8xxx:
12/11 Paul Gortmaker ? ? [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.

Applied

12/30 Poonam_Aggrwal-b1 ?[U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)

This was applied (e1be0d25ecf494ae81245ca438738ba839d6329b)

01/15 hamoshame Lamotek ?[U-Boot] MPC8572DS Registered DDR2 support.

This is just a question thread

02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs
02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address
02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound
02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts

All were applied at some point

02/10 "Ajeesh Kumar" ? ? U-boot level MPC8548 Ethernet internal/External Loop back testing

Not a patch

02/12 Becky Bruce ? ? ? ?[U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages
02/12 Becky Bruce ? ? ? ?[U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default

Both applied already.