Skip to contentSkip to conversation

Ksplice: Rebootless kernel updates

PATCH In review Tim Abbott 3 participants 8 messages Feb 25, 2009 – Feb 27, 2009

Subsystems (22)
lore
Share & tools
lore

Tim Abbott

author
#0 lore raw

v2 cover Ksplice: Rebootless kernel updates

This is an updated version of the Ksplice patch series. It applies to Linux 2.6.29-rc5 with Rusty Russell's patch series for the module subsystem from February 7 [0].

[0] http://lkml.org/lkml/2009/2/7/53

This patch series differs from the previous version in a few notable ways:

(1) The Ksplice changes to the module loader have been removed from this patch series because versions of them are already in Rusty Russell's tree.

(2) Some of the data structures were renamed in response to suggestions from Rusty Russell on the previous version of the patch series

(3) The patch changing the kernel's magic section names to support -ffunction-sections fdata-sections patch was rewritten in a cleaner way. I believe this new version of the patch eliminates the primary downside associated with previous iterations of the patch (in particular, the need to specify section flags for many sections).

A detailed changelog is available below.

==

These patches add support for Ksplice [1], a rebootless update system, to the kernel.

[1] http://www.ksplice.com/download

Jeff Arnold first mentioned Ksplice to the LKML last April [2], and submitted patches to the LKML last September [3], November [4], and December [5]. The basic idea is that Ksplice can apply an update to a running Linux kernel based only on a source code patch and the original kernel source. The Ksplice technical overview document [6] describes the design of Ksplice and some of the ways that Ksplice has been evaluated.

[2] http://lkml.org/lkml/2008/4/23/330
[3] http://lkml.org/lkml/2008/9/13/6
[4] http://lkml.org/lkml/2008/11/21/484
[5] http://lkml.org/lkml/2008/12/5/330
[6] http://www.ksplice.com/doc/ksplice.pdf

Specifically, Ksplice has been used to correct every significant Linux kernel CVE from May 2005 to May 2008 [7]. 88% of these CVEs can be fixed without writing any new code at all; the remaining 12% of CVEs require a minimal amount of new code (on average, roughly 20 new semicolon-terminated lines per CVE).

[7] http://www.ksplice.com/cve-evaluation

The interface between the Ksplice kernel component and the userspace utilities is documented in the last patch of this series. The current implementation of the userspace utilities is available from the Ksplice website and the Ksplice git repository [8]. The Ksplice userspace utilities transparently support both "integrated" operation (updating a kernel patched with this patch series) and "standalone" operation (updating a completely unmodified kernel).

[8] http://www.ksplice.com/git/ksplice.git

We think that merging Ksplice makes sense at this point because (1) development on the Ksplice kernel code has stabilized and (2) the system is useful as it currently stands.

-Tim Abbott

Changes between v1 and v2:
- rewrote the -ffunction-sections -fdata-sections patches in a cleaner way
- rebased on top of Rusty Russell's module.c patch series for 2.6.30.
- replaced starts_with with strstarts.
- replaced __module_data_address with __module_address.
- renamed some data structures, as requested by Rusty Russell
- renamed struct ksplice_pack to struct ksplice_mod_change.
- created new struct ksplice_code, containing the symbols, relocs, and sections for an object file.
- renamed helper modules to old_code modules, and primary modules to new_code modules.
- renamed ksplice_module_list to ksplice_modules.
- renamed ksplice_symbol->vals to candidate_vals
- created new struct ksplice_hooks to organize the Ksplice hooks.
- improved Ksplice's kobject variable names.
- merged apply_patches and reverse_patches.
- added check to prevent reversing an update that has been partially cold-applied.
- added support for patching multi-page data structures.
- added more function-level documentation, as requested by Ted Ts'o
- bail out earlier (to give a better error message) when there are multiple writers to an update's stage file.

Changes between RFC v3 and v1:
- removed use of init_mm, as requested by Christoph Hellwig

Changes between RFC v2 and RFC v3:
- added taint flag, as requested by Alexey Dobriyan
- various speed optimizations
- support for replacing functions mapped read-only (CONFIG_DEBUG_RODATA)
- run-pre matching extended to bug table, ex_table, exported symbol table
- added hooks for calling custom code during the update process
- struct ksplice_export eliminated (struct ksplice_patch used instead)
- minor sysfs API changes
- added support for ksplice-apply's --partial option
- improved -ffunction-sections patches and added them to this patch series
- dropped ARM support for now, for simplicity

No changes between RFC v1 and RFC v2.

==

Jeff Arnold (1):
Ksplice: Support updating x86-32 and x86-64

Tim Abbott (2):
Make section names compatible with -ffunction-sections
-fdata-sections
Ksplice: Export symbols needed for Ksplice

Waseem Daher (1):
x86: Add an option to compile with -ffunction-sections
-fdata-sections

 Documentation/ksplice.txt                   |  304 +++
 Documentation/mutex-design.txt              |    4 +-
 MAINTAINERS                                 |   10 +
 Makefile                                    |    4 +
 arch/Kconfig                                |   14 +
 arch/alpha/kernel/head.S                    |    2 +-
 arch/alpha/kernel/init_task.c               |    2 +-
 arch/alpha/kernel/vmlinux.lds.S             |   14 +-
 arch/arm/kernel/head-nommu.S                |    2 +-
 arch/arm/kernel/head.S                      |    2 +-
 arch/arm/kernel/init_task.c                 |    2 +-
 arch/arm/kernel/vmlinux.lds.S               |   14 +-
 arch/arm/mm/proc-v6.S                       |    2 +-
 arch/arm/mm/proc-v7.S                       |    2 +-
 arch/arm/mm/tlb-v6.S                        |    2 +-
 arch/arm/mm/tlb-v7.S                        |    2 +-
 arch/avr32/kernel/init_task.c               |    2 +-
 arch/avr32/kernel/vmlinux.lds.S             |    6 +-
 arch/avr32/mm/init.c                        |    2 +-
 arch/blackfin/kernel/vmlinux.lds.S          |    2 +-
 arch/cris/kernel/process.c                  |    2 +-
 arch/cris/kernel/vmlinux.lds.S              |    2 +-
 arch/frv/kernel/break.S                     |    4 +-
 arch/frv/kernel/entry.S                     |    2 +-
 arch/frv/kernel/head-mmu-fr451.S            |    2 +-
 arch/frv/kernel/head-uc-fr401.S             |    2 +-
 arch/frv/kernel/head-uc-fr451.S             |    2 +-
 arch/frv/kernel/head-uc-fr555.S             |    2 +-
 arch/frv/kernel/head.S                      |    4 +-
 arch/frv/kernel/init_task.c                 |    2 +-
 arch/frv/kernel/vmlinux.lds.S               |   18 +-
 arch/frv/mm/tlb-miss.S                      |    2 +-
 arch/h8300/boot/compressed/head.S           |    2 +-
 arch/h8300/boot/compressed/vmlinux.lds      |    2 +-
 arch/h8300/kernel/init_task.c               |    2 +-
 arch/h8300/kernel/vmlinux.lds.S             |    2 +-
 arch/ia64/include/asm/asmmacro.h            |   12 +-
 arch/ia64/include/asm/cache.h               |    2 +-
 arch/ia64/include/asm/percpu.h              |    2 +-
 arch/ia64/kernel/Makefile                   |    2 +-
 arch/ia64/kernel/gate-data.S                |    2 +-
 arch/ia64/kernel/gate.S                     |    8 +-
 arch/ia64/kernel/gate.lds.S                 |   10 +-
 arch/ia64/kernel/head.S                     |    2 +-
 arch/ia64/kernel/init_task.c                |    4 +-
 arch/ia64/kernel/ivt.S                      |    2 +-
 arch/ia64/kernel/minstate.h                 |    4 +-
 arch/ia64/kernel/paravirtentry.S            |    2 +-
 arch/ia64/kernel/vmlinux.lds.S              |   48 +-
 arch/ia64/kvm/vmm_ivt.S                     |    2 +-
 arch/ia64/xen/xensetup.S                    |    2 +-
 arch/m32r/kernel/head.S                     |    2 +-
 arch/m32r/kernel/init_task.c                |    2 +-
 arch/m32r/kernel/vmlinux.lds.S              |    8 +-
 arch/m68k/kernel/head.S                     |    2 +-
 arch/m68k/kernel/process.c                  |    2 +-
 arch/m68k/kernel/sun3-head.S                |    2 +-
 arch/m68k/kernel/vmlinux-std.lds            |    6 +-
 arch/m68k/kernel/vmlinux-sun3.lds           |    4 +-
 arch/m68knommu/kernel/init_task.c           |    2 +-
 arch/m68knommu/kernel/vmlinux.lds.S         |    6 +-
 arch/m68knommu/platform/68360/head-ram.S    |    2 +-
 arch/m68knommu/platform/68360/head-rom.S    |    2 +-
 arch/mips/kernel/init_task.c                |    2 +-
 arch/mips/kernel/vmlinux.lds.S              |    8 +-
 arch/mips/lasat/image/head.S                |    2 +-
 arch/mips/lasat/image/romscript.normal      |    2 +-
 arch/mn10300/kernel/head.S                  |    2 +-
 arch/mn10300/kernel/init_task.c             |    2 +-
 arch/mn10300/kernel/vmlinux.lds.S           |   16 +-
 arch/parisc/include/asm/cache.h             |    2 +-
 arch/parisc/include/asm/system.h            |    2 +-
 arch/parisc/kernel/head.S                   |    2 +-
 arch/parisc/kernel/init_task.c              |    8 +-
 arch/parisc/kernel/vmlinux.lds.S            |   26 +-
 arch/powerpc/include/asm/cache.h            |    2 +-
 arch/powerpc/include/asm/page_64.h          |    2 +-
 arch/powerpc/include/asm/ppc_asm.h          |    4 +-
 arch/powerpc/kernel/head_32.S               |    2 +-
 arch/powerpc/kernel/head_40x.S              |    2 +-
 arch/powerpc/kernel/head_44x.S              |    2 +-
 arch/powerpc/kernel/head_8xx.S              |    2 +-
 arch/powerpc/kernel/head_fsl_booke.S        |    2 +-
 arch/powerpc/kernel/init_task.c             |    2 +-
 arch/powerpc/kernel/machine_kexec_64.c      |    2 +-
 arch/powerpc/kernel/vdso.c                  |    2 +-
 arch/powerpc/kernel/vdso32/vdso32_wrapper.S |    2 +-
 arch/powerpc/kernel/vdso64/vdso64_wrapper.S |    2 +-
 arch/powerpc/kernel/vmlinux.lds.S           |   28 +-
 arch/s390/include/asm/cache.h               |    2 +-
 arch/s390/kernel/head.S                     |    2 +-
 arch/s390/kernel/init_task.c                |    2 +-
 arch/s390/kernel/vdso.c                     |    2 +-
 arch/s390/kernel/vdso32/vdso32_wrapper.S    |    2 +-
 arch/s390/kernel/vdso64/vdso64_wrapper.S    |    2 +-
 arch/s390/kernel/vmlinux.lds.S              |   20 +-
 arch/sh/include/asm/cache.h                 |    2 +-
 arch/sh/kernel/cpu/sh5/entry.S              |    4 +-
 arch/sh/kernel/head_32.S                    |    2 +-
 arch/sh/kernel/head_64.S                    |    2 +-
 arch/sh/kernel/init_task.c                  |    2 +-
 arch/sh/kernel/irq.c                        |    4 +-
 arch/sh/kernel/vmlinux_32.lds.S             |   14 +-
 arch/sh/kernel/vmlinux_64.lds.S             |   14 +-
 arch/sparc/boot/btfixupprep.c               |    4 +-
 arch/sparc/include/asm/cache.h              |    2 +-
 arch/sparc/kernel/head_32.S                 |    4 +-
 arch/sparc/kernel/head_64.S                 |    2 +-
 arch/sparc/kernel/init_task.c               |    2 +-
 arch/sparc/kernel/vmlinux.lds.S             |   14 +-
 arch/um/include/asm/common.lds.S            |    4 +-
 arch/um/kernel/dyn.lds.S                    |    4 +-
 arch/um/kernel/init_task.c                  |    4 +-
 arch/um/kernel/uml.lds.S                    |    4 +-
 arch/x86/Kconfig                            |    2 +
 arch/x86/boot/compressed/head_32.S          |    2 +-
 arch/x86/boot/compressed/head_64.S          |    2 +-
 arch/x86/boot/compressed/relocs.c           |    2 +-
 arch/x86/boot/compressed/vmlinux.scr        |    2 +-
 arch/x86/boot/compressed/vmlinux_32.lds     |   14 +-
 arch/x86/boot/compressed/vmlinux_64.lds     |   10 +-
 arch/x86/include/asm/cache.h                |    4 +-
 arch/x86/kernel/acpi/wakeup_32.S            |    2 +-
 arch/x86/kernel/head_32.S                   |    6 +-
 arch/x86/kernel/head_64.S                   |    4 +-
 arch/x86/kernel/init_task.c                 |    4 +-
 arch/x86/kernel/ksplice-arch.c              |   96 +
 arch/x86/kernel/traps.c                     |    2 +-
 arch/x86/kernel/vmlinux_32.lds.S            |   37 +-
 arch/x86/kernel/vmlinux_64.lds.S            |   27 +-
 arch/xtensa/kernel/head.S                   |    2 +-
 arch/xtensa/kernel/init_task.c              |    2 +-
 arch/xtensa/kernel/vmlinux.lds.S            |    6 +-
 include/asm-frv/init.h                      |    8 +-
 include/asm-generic/vmlinux.lds.h           |   19 +-
 include/linux/cache.h                       |    2 +-
 include/linux/init.h                        |    8 +-
 include/linux/kernel.h                      |    1 +
 include/linux/ksplice.h                     |  224 ++
 include/linux/linkage.h                     |    4 +-
 include/linux/percpu.h                      |   10 +-
 include/linux/spinlock.h                    |    2 +-
 kernel/Makefile                             |    3 +
 kernel/extable.c                            |    3 +
 kernel/ksplice.c                            | 2995 +++++++++++++++++++++++++++
 kernel/module.c                             |    4 +-
 kernel/panic.c                              |    1 +
 kernel/sched.c                              |    1 +
 lib/Kconfig.debug                           |   18 +
 lib/bug.c                                   |    1 +
 scripts/Makefile.modpost                    |    1 +
 scripts/mod/modpost.c                       |   22 +-
 scripts/recordmcount.pl                     |    6 +-
 153 files changed, 4049 insertions(+), 350 deletions(-)
 create mode 100644 Documentation/ksplice.txt
 create mode 100644 arch/x86/kernel/ksplice-arch.c
 create mode 100644 include/linux/ksplice.h
 create mode 100644 kernel/ksplice.c
author
#1 lore raw

PATCH v2 1/4 Make section names compatible with -ffunction-sections -fdata-sections

The purpose of this patch is to make it possible to build the kernel with "gcc -ffunction-sections -fdata-sections". This is a key step towards being able to compile the kernel using the --gc-sections linker option, which can be used to decrease the vmlinux size by garbage collecting unused functions. Also, Ksplice's 'run-pre matching' process is much simpler if the original kernel was compiled with -ffunction-sections and -fdata-sections.

Currently, the kernel uses a number of "magic" section names such as ".data.nosave" and ".text.head".

The problem is that with -ffunction-sections -fdata-sections, gcc places code like

static void head(...) {...}

in the .text.head section, and code like

static int nosave = 1;

in the .data.nosave section, causing code to be inappropriately placed in the "magic" sections. This patch renames all "magic" section names used by the kernel to use ".." rather than "." as the delimiter between the section prefix (e.g. ".text") and suffix (e.g. "head"), so that ".data.nosave" becomes ".data..nosave", etc. The key property of these names is that there are no collisions between the kernel's "magic" sections and the sections generated by gcc's -ffunction-sections and -fdata-sections options. One can then reference the sections generated by -ffunction-sections using a linker script pattern such as *(.text.[A-Za-z$_]*)

This patch is based on an some earlier patches by Denys Vlasenko. Those earlier patches used section names like ".kernel.text.head". Because these names did not begin with e.g. ".text", the assembler did not automatically use the correct section flags for them, and so one needed to explicitly declare the sections flags when declaring a section in assembly files using code such as:

.section .kernel.text.head, "ax", @progbits

These explicit section flags in assembly files turned out to be a common source of confusion, and so I rewrote the patch with this new section naming scheme suggested by Anders Kaseorg.

---
 Documentation/mutex-design.txt              |    4 +-
 arch/alpha/kernel/head.S                    |    2 +-
 arch/alpha/kernel/init_task.c               |    2 +-
 arch/alpha/kernel/vmlinux.lds.S             |   14 ++++----
 arch/arm/kernel/head-nommu.S                |    2 +-
 arch/arm/kernel/head.S                      |    2 +-
 arch/arm/kernel/init_task.c                 |    2 +-
 arch/arm/kernel/vmlinux.lds.S               |   14 ++++----
 arch/arm/mm/proc-v6.S                       |    2 +-
 arch/arm/mm/proc-v7.S                       |    2 +-
 arch/arm/mm/tlb-v6.S                        |    2 +-
 arch/arm/mm/tlb-v7.S                        |    2 +-
 arch/avr32/kernel/init_task.c               |    2 +-
 arch/avr32/kernel/vmlinux.lds.S             |    6 ++--
 arch/avr32/mm/init.c                        |    2 +-
 arch/blackfin/kernel/vmlinux.lds.S          |    2 +-
 arch/cris/kernel/process.c                  |    2 +-
 arch/cris/kernel/vmlinux.lds.S              |    2 +-
 arch/frv/kernel/break.S                     |    4 +-
 arch/frv/kernel/entry.S                     |    2 +-
 arch/frv/kernel/head-mmu-fr451.S            |    2 +-
 arch/frv/kernel/head-uc-fr401.S             |    2 +-
 arch/frv/kernel/head-uc-fr451.S             |    2 +-
 arch/frv/kernel/head-uc-fr555.S             |    2 +-
 arch/frv/kernel/head.S                      |    4 +-
 arch/frv/kernel/init_task.c                 |    2 +-
 arch/frv/kernel/vmlinux.lds.S               |   18 +++++-----
 arch/frv/mm/tlb-miss.S                      |    2 +-
 arch/h8300/boot/compressed/head.S           |    2 +-
 arch/h8300/boot/compressed/vmlinux.lds      |    2 +-
 arch/h8300/kernel/init_task.c               |    2 +-
 arch/h8300/kernel/vmlinux.lds.S             |    2 +-
 arch/ia64/include/asm/asmmacro.h            |   12 +++---
 arch/ia64/include/asm/cache.h               |    2 +-
 arch/ia64/include/asm/percpu.h              |    2 +-
 arch/ia64/kernel/Makefile                   |    2 +-
 arch/ia64/kernel/gate-data.S                |    2 +-
 arch/ia64/kernel/gate.S                     |    8 ++--
 arch/ia64/kernel/gate.lds.S                 |   10 +++---
 arch/ia64/kernel/head.S                     |    2 +-
 arch/ia64/kernel/init_task.c                |    4 +-
 arch/ia64/kernel/ivt.S                      |    2 +-
 arch/ia64/kernel/minstate.h                 |    4 +-
 arch/ia64/kernel/paravirtentry.S            |    2 +-
 arch/ia64/kernel/vmlinux.lds.S              |   48 +++++++++++++-------------
 arch/ia64/kvm/vmm_ivt.S                     |    2 +-
 arch/ia64/xen/xensetup.S                    |    2 +-
 arch/m32r/kernel/head.S                     |    2 +-
 arch/m32r/kernel/init_task.c                |    2 +-
 arch/m32r/kernel/vmlinux.lds.S              |    8 ++--
 arch/m68k/kernel/head.S                     |    2 +-
 arch/m68k/kernel/process.c                  |    2 +-
 arch/m68k/kernel/sun3-head.S                |    2 +-
 arch/m68k/kernel/vmlinux-std.lds            |    6 ++--
 arch/m68k/kernel/vmlinux-sun3.lds           |    4 +-
 arch/m68knommu/kernel/init_task.c           |    2 +-
 arch/m68knommu/kernel/vmlinux.lds.S         |    6 ++--
 arch/m68knommu/platform/68360/head-ram.S    |    2 +-
 arch/m68knommu/platform/68360/head-rom.S    |    2 +-
 arch/mips/kernel/init_task.c                |    2 +-
 arch/mips/kernel/vmlinux.lds.S              |    8 ++--
 arch/mips/lasat/image/head.S                |    2 +-
 arch/mips/lasat/image/romscript.normal      |    2 +-
 arch/mn10300/kernel/head.S                  |    2 +-
 arch/mn10300/kernel/init_task.c             |    2 +-
 arch/mn10300/kernel/vmlinux.lds.S           |   16 ++++----
 arch/parisc/include/asm/cache.h             |    2 +-
 arch/parisc/include/asm/system.h            |    2 +-
 arch/parisc/kernel/head.S                   |    2 +-
 arch/parisc/kernel/init_task.c              |    8 ++--
 arch/parisc/kernel/vmlinux.lds.S            |   26 +++++++-------
 arch/powerpc/include/asm/cache.h            |    2 +-
 arch/powerpc/include/asm/page_64.h          |    2 +-
 arch/powerpc/include/asm/ppc_asm.h          |    4 +-
 arch/powerpc/kernel/head_32.S               |    2 +-
 arch/powerpc/kernel/head_40x.S              |    2 +-
 arch/powerpc/kernel/head_44x.S              |    2 +-
 arch/powerpc/kernel/head_8xx.S              |    2 +-
 arch/powerpc/kernel/head_fsl_booke.S        |    2 +-
 arch/powerpc/kernel/init_task.c             |    2 +-
 arch/powerpc/kernel/machine_kexec_64.c      |    2 +-
 arch/powerpc/kernel/vdso.c                  |    2 +-
 arch/powerpc/kernel/vdso32/vdso32_wrapper.S |    2 +-
 arch/powerpc/kernel/vdso64/vdso64_wrapper.S |    2 +-
 arch/powerpc/kernel/vmlinux.lds.S           |   28 ++++++++--------
 arch/s390/include/asm/cache.h               |    2 +-
 arch/s390/kernel/head.S                     |    2 +-
 arch/s390/kernel/init_task.c                |    2 +-
 arch/s390/kernel/vdso.c                     |    2 +-
 arch/s390/kernel/vdso32/vdso32_wrapper.S    |    2 +-
 arch/s390/kernel/vdso64/vdso64_wrapper.S    |    2 +-
 arch/s390/kernel/vmlinux.lds.S              |   20 +++++-----
 arch/sh/include/asm/cache.h                 |    2 +-
 arch/sh/kernel/cpu/sh5/entry.S              |    4 +-
 arch/sh/kernel/head_32.S                    |    2 +-
 arch/sh/kernel/head_64.S                    |    2 +-
 arch/sh/kernel/init_task.c                  |    2 +-
 arch/sh/kernel/irq.c                        |    4 +-
 arch/sh/kernel/vmlinux_32.lds.S             |   14 ++++----
 arch/sh/kernel/vmlinux_64.lds.S             |   14 ++++----
 arch/sparc/boot/btfixupprep.c               |    4 +-
 arch/sparc/include/asm/cache.h              |    2 +-
 arch/sparc/kernel/head_32.S                 |    4 +-
 arch/sparc/kernel/head_64.S                 |    2 +-
 arch/sparc/kernel/init_task.c               |    2 +-
 arch/sparc/kernel/vmlinux.lds.S             |   14 ++++----
 arch/um/include/asm/common.lds.S            |    4 +-
 arch/um/kernel/dyn.lds.S                    |    4 +-
 arch/um/kernel/init_task.c                  |    4 +-
 arch/um/kernel/uml.lds.S                    |    4 +-
 arch/x86/boot/compressed/head_32.S          |    2 +-
 arch/x86/boot/compressed/head_64.S          |    2 +-
 arch/x86/boot/compressed/relocs.c           |    2 +-
 arch/x86/boot/compressed/vmlinux.scr        |    2 +-
 arch/x86/boot/compressed/vmlinux_32.lds     |   14 +++++--
 arch/x86/boot/compressed/vmlinux_64.lds     |   10 +++--
 arch/x86/include/asm/cache.h                |    4 +-
 arch/x86/kernel/acpi/wakeup_32.S            |    2 +-
 arch/x86/kernel/head_32.S                   |    6 ++--
 arch/x86/kernel/head_64.S                   |    4 +-
 arch/x86/kernel/init_task.c                 |    4 +-
 arch/x86/kernel/traps.c                     |    2 +-
 arch/x86/kernel/vmlinux_32.lds.S            |   36 ++++++++++----------
 arch/x86/kernel/vmlinux_64.lds.S            |   26 +++++++-------
 arch/xtensa/kernel/head.S                   |    2 +-
 arch/xtensa/kernel/init_task.c              |    2 +-
 arch/xtensa/kernel/vmlinux.lds.S            |    6 ++--
 include/asm-frv/init.h                      |    8 ++--
 include/asm-generic/vmlinux.lds.h           |   14 ++++----
 include/linux/cache.h                       |    2 +-
 include/linux/init.h                        |    8 ++--
 include/linux/linkage.h                     |    4 +-
 include/linux/percpu.h                      |   10 +++---
 include/linux/spinlock.h                    |    2 +-
 kernel/module.c                             |    2 +-
 scripts/mod/modpost.c                       |   12 +++---
 scripts/recordmcount.pl                     |    6 ++--
 137 files changed, 355 insertions(+), 347 deletions(-)
Documentation/mutex-design.txt +2 -2
index aa60d1f..c91ccc0 100644
@@ -66,14 +66,14 @@ of advantages of mutexes:
 
     c0377ccb <mutex_lock>:
     c0377ccb:       f0 ff 08                lock decl (%eax)
-    c0377cce:       78 0e                   js     c0377cde <.text.lock.mutex>
+    c0377cce:       78 0e                   js     c0377cde <.text..lock.mutex>
     c0377cd0:       c3                      ret
 
    the unlocking fastpath is equally tight:
 
     c0377cd1 <mutex_unlock>:
     c0377cd1:       f0 ff 00                lock incl (%eax)
-    c0377cd4:       7e 0f                   jle    c0377ce5 <.text.lock.mutex+0x7>
+    c0377cd4:       7e 0f                   jle    c0377ce5 <.text..lock.mutex+0x7>
     c0377cd6:       c3                      ret
 
  - 'struct mutex' semantics are well-defined and are enforced if
arch/alpha/kernel/head.S +1 -1
index 7ac1f13..16293d4 100644
@@ -10,7 +10,7 @@
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 
-.section .text.head, "ax"
+.section .text..head, "ax"
 .globl swapper_pg_dir
 .globl _stext
 swapper_pg_dir=SWAPPER_PGD
arch/alpha/kernel/init_task.c +1 -1
index c2938e5..7929755 100644
@@ -17,5 +17,5 @@ EXPORT_SYMBOL(init_mm);
 EXPORT_SYMBOL(init_task);
 
 union thread_union init_thread_union
-	__attribute__((section(".data.init_thread")))
+	__attribute__((section(".data..init_thread")))
 	= { INIT_THREAD_INFO(init_task) };
arch/alpha/kernel/vmlinux.lds.S +7 -7
index ef37fc1..511f8ca 100644
@@ -16,7 +16,7 @@ SECTIONS
 
 	_text = .;	/* Text and read-only data */
 	.text : {
-	*(.text.head)
+	*(.text..head)
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
@@ -93,18 +93,18 @@ SECTIONS
 	/* Freed after init ends here */
 
 	/* Note 2 page alignment above.  */
-	.data.init_thread : {
-		*(.data.init_thread)
+	.data..init_thread : {
+		*(.data..init_thread)
 	}
 
 	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.page_aligned)
+	.data..page_aligned : {
+		*(.data..page_aligned)
 	}
 
 	. = ALIGN(64);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
+	.data..cacheline_aligned : {
+		*(.data..cacheline_aligned)
 	}
 
 	_data = .;
arch/arm/kernel/head-nommu.S +1 -1
index cc87e17..fcd93f5 100644
@@ -32,7 +32,7 @@
  * numbers for r1.
  *
  */
-	.section ".text.head", "ax"
+	.section ".text..head", "ax"
 ENTRY(stext)
 	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
 						@ and irqs disabled
arch/arm/kernel/head.S +1 -1
index 21e17dc..705e759 100644
@@ -74,7 +74,7 @@
  * crap here - that's what the boot loader (or in extreme, well justified
  * circumstances, zImage) is for.
  */
-	.section ".text.head", "ax"
+	.section ".text..head", "ax"
 ENTRY(stext)
 	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
 						@ and irqs disabled
arch/arm/kernel/init_task.c +1 -1
index e859af3..0b81b8f 100644
@@ -29,7 +29,7 @@ EXPORT_SYMBOL(init_mm);
  * The things we do for performance..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/arm/kernel/vmlinux.lds.S +7 -7
index 0021607..4ec9516 100644
@@ -23,10 +23,10 @@ SECTIONS
 #else
 	. = PAGE_OFFSET + TEXT_OFFSET;
 #endif
-	.text.head : {
+	.text..head : {
 		_stext = .;
 		_sinittext = .;
-		*(.text.head)
+		*(.text..head)
 	}
 
 	.init : {			/* Init code and data		*/
@@ -65,8 +65,8 @@ SECTIONS
 #endif
 		. = ALIGN(4096);
 		__per_cpu_start = .;
-			*(.data.percpu)
-			*(.data.percpu.shared_aligned)
+			*(.data..percpu)
+			*(.data..percpu.shared_aligned)
 		__per_cpu_end = .;
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
@@ -125,7 +125,7 @@ SECTIONS
 		 * first, the init task union, aligned
 		 * to an 8192 byte boundary.
 		 */
-		*(.data.init_task)
+		*(.data..init_task)
 
 #ifdef CONFIG_XIP_KERNEL
 		. = ALIGN(4096);
@@ -137,7 +137,7 @@ SECTIONS
 
 		. = ALIGN(4096);
 		__nosave_begin = .;
-		*(.data.nosave)
+		*(.data..nosave)
 		. = ALIGN(4096);
 		__nosave_end = .;
 
@@ -145,7 +145,7 @@ SECTIONS
 		 * then the cacheline aligned data
 		 */
 		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		*(.data..cacheline_aligned)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
arch/arm/mm/proc-v6.S +1 -1
index f0cc599..39d8dd1 100644
@@ -132,7 +132,7 @@ cpu_v6_name:
 	.asciz	"ARMv6-compatible processor"
 	.align
 
-	.section ".text.init", #alloc, #execinstr
+	.section ".text..init", #alloc, #execinstr
 
 /*
  *	__v6_setup
arch/arm/mm/proc-v7.S +1 -1
index d1ebec4..f03c14c 100644
@@ -153,7 +153,7 @@ cpu_v7_name:
 	.ascii	"ARMv7 Processor"
 	.align
 
-	.section ".text.init", #alloc, #execinstr
+	.section ".text..init", #alloc, #execinstr
 
 /*
  *	__v7_setup
arch/arm/mm/tlb-v6.S +1 -1
index 20f84bb..7e9a62a 100644
@@ -87,7 +87,7 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
-	.section ".text.init", #alloc, #execinstr
+	.section ".text..init", #alloc, #execinstr
 
 	.type	v6wbi_tlb_fns, #object
 ENTRY(v6wbi_tlb_fns)
arch/arm/mm/tlb-v7.S +1 -1
index 24ba510..875a0bd 100644
@@ -80,7 +80,7 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	pc, lr
 ENDPROC(v7wbi_flush_kern_tlb_range)
 
-	.section ".text.init", #alloc, #execinstr
+	.section ".text..init", #alloc, #execinstr
 
 	.type	v7wbi_tlb_fns, #object
 ENTRY(v7wbi_tlb_fns)
arch/avr32/kernel/init_task.c +1 -1
index 993d56e..4678bc6 100644
@@ -23,7 +23,7 @@ EXPORT_SYMBOL(init_mm);
  * Initial thread structure. Must be aligned on an 8192-byte boundary.
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/avr32/kernel/vmlinux.lds.S +3 -3
index 7910d41..5e73a02 100644
@@ -95,15 +95,15 @@ SECTIONS
 		/*
 		 * First, the init task union, aligned to an 8K boundary.
 		 */
-		*(.data.init_task)
+		*(.data..init_task)
 
 		/* Then, the page-aligned data */
 		. = ALIGN(PAGE_SIZE);
-		*(.data.page_aligned)
+		*(.data..page_aligned)
 
 		/* Then, the cacheline aligned data */
 		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.cacheline_aligned)
+		*(.data..cacheline_aligned)
 
 		/* And the rest... */
 		*(.data.rel*)
arch/avr32/mm/init.c +1 -1
index e819fa6..533a011 100644
@@ -24,7 +24,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
-#define __page_aligned	__attribute__((section(".data.page_aligned")))
+#define __page_aligned	__attribute__((section(".data..page_aligned")))
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
arch/blackfin/kernel/vmlinux.lds.S +1 -1
index 4b4341d..027ff23 100644
@@ -94,7 +94,7 @@ SECTIONS
 		__sdata = .;
 		/* This gets done first, so the glob doesn't suck it in */
 		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		*(.data..cacheline_aligned)
 
 #if !L1_DATA_A_LENGTH
 		. = ALIGN(32);
arch/cris/kernel/process.c +1 -1
index 60816e8..d31e27e 100644
@@ -51,7 +51,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/cris/kernel/vmlinux.lds.S +1 -1
index 0d2adfc..f603bc8 100644
@@ -68,7 +68,7 @@ SECTIONS
 	_edata = . ;
 
 	. = ALIGN(PAGE_SIZE);	/* init_task and stack, must be aligned. */
-	.data.init_task : { *(.data.init_task) }
+	.data..init_task : { *(.data..init_task) }
 
 	. = ALIGN(PAGE_SIZE);		/* Init code and data. */
 	__init_begin = .;
arch/frv/kernel/break.S +2 -2
index bd0bdf9..cbb6958 100644
@@ -21,7 +21,7 @@
 #
 # the break handler has its own stack
 #
-	.section	.bss.stack
+	.section	.bss..stack
 	.globl		__break_user_context
 	.balign		THREAD_SIZE
 __break_stack:
@@ -63,7 +63,7 @@ __break_trace_through_exceptions:
 # entry point for Break Exceptions/Interrupts
 #
 ###############################################################################
-	.section	.text.break
+	.section	.text..break
 	.balign		4
 	.globl		__entry_break
 __entry_break:
arch/frv/kernel/entry.S +1 -1
index 99060ab..fe5479b 100644
@@ -38,7 +38,7 @@
 
 #define nr_syscalls ((syscall_table_size)/4)
 
-	.section	.text.entry
+	.section	.text..entry
 	.balign		4
 
 .macro LEDS val
arch/frv/kernel/head-mmu-fr451.S +1 -1
index c8f210d..5900967 100644
@@ -31,7 +31,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	.section	.text..init,"ax"
 	.balign		4
 
 ###############################################################################
arch/frv/kernel/head-uc-fr401.S +1 -1
index ee282be..ecba176 100644
@@ -30,7 +30,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	.section	.text..init,"ax"
 	.balign		4
 
 ###############################################################################
arch/frv/kernel/head-uc-fr451.S +1 -1
index b10d9c8..ed9dd17 100644
@@ -30,7 +30,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	.section	.text..init,"ax"
 	.balign		4
 
 ###############################################################################
arch/frv/kernel/head-uc-fr555.S +1 -1
index 39937c1..ee46b0b 100644
@@ -29,7 +29,7 @@
 #define __551_LCR	0xfeff1100
 #define __551_LSBR	0xfeff1c00
 
-	.section	.text.init,"ax"
+	.section	.text..init,"ax"
 	.balign		4
 
 ###############################################################################
arch/frv/kernel/head.S +2 -2
index fecf751..35e6391 100644
@@ -27,7 +27,7 @@
 #   command line string
 #
 ###############################################################################
-	.section	.text.head,"ax"
+	.section	.text..head,"ax"
 	.balign		4
 
 	.globl		_boot, __head_reference
@@ -541,7 +541,7 @@ __head_end:
 	.size		_boot, .-_boot
 
 	# provide a point for GDB to place a break
-	.section	.text.start,"ax"
+	.section	.text..start,"ax"
 	.globl		_start
 	.balign		4
 _start:
arch/frv/kernel/init_task.c +1 -1
index 29429a8..f57ec19 100644
@@ -24,7 +24,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/frv/kernel/vmlinux.lds.S +9 -9
index b95c4ea..a7bcf9b 100644
@@ -26,7 +26,7 @@ SECTIONS
 
   _sinittext = .;
   .init.text : {
-	*(.text.head)
+	*(.text..head)
 #ifndef CONFIG_DEBUG_INFO
 	INIT_TEXT
 	EXIT_TEXT
@@ -71,13 +71,13 @@ SECTIONS
 
   /* put sections together that have massive alignment issues */
   . = ALIGN(THREAD_SIZE);
-  .data.init_task : {
+  .data..init_task : {
 	  /* init task record & stack */
-	  *(.data.init_task)
+	  *(.data..init_task)
   }
 
   . = ALIGN(L1_CACHE_BYTES);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+  .data..cacheline_aligned : { *(.data..cacheline_aligned) }
 
   .trap : {
 	/* trap table management - read entry-table.S before modifying */
@@ -94,10 +94,10 @@ SECTIONS
   _text = .;
   _stext = .;
   .text : {
-	*(.text.start)
-	*(.text.entry)
-	*(.text.break)
-	*(.text.tlbmiss)
+	*(.text..start)
+	*(.text..entry)
+	*(.text..break)
+	*(.text..tlbmiss)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
@@ -152,7 +152,7 @@ SECTIONS
 
   .sbss		: { *(.sbss .sbss.*) }
   .bss		: { *(.bss .bss.*) }
-  .bss.stack	: { *(.bss) }
+  .bss..stack	: { *(.bss) }
 
   __bss_stop = .;
   _end = . ;
arch/frv/mm/tlb-miss.S +1 -1
index 0764348..0f41b41 100644
@@ -16,7 +16,7 @@
 #include <asm/highmem.h>
 #include <asm/spr-regs.h>
 
-	.section	.text.tlbmiss
+	.section	.text..tlbmiss
 	.balign		4
 
 	.globl		__entry_insn_mmu_miss
arch/h8300/boot/compressed/head.S +1 -1
index 985a81a..10e9a2d 100644
@@ -9,7 +9,7 @@
 
 #define SRAM_START 0xff4000
 
-	.section	.text.startup
+	.section	.text..startup
 	.global	startup
 startup:
 	mov.l	#SRAM_START+0x8000, sp
arch/h8300/boot/compressed/vmlinux.lds +1 -1
index 65e2a0d..a0a3a0e 100644
@@ -4,7 +4,7 @@ SECTIONS
         {
         __stext = . ;
 	__text = .;
-	       *(.text.startup)
+	       *(.text..startup)
 	       *(.text)
         __etext = . ;
         }
arch/h8300/kernel/init_task.c +1 -1
index cb5dc55..fb473b1 100644
@@ -36,6 +36,6 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
arch/h8300/kernel/vmlinux.lds.S +1 -1
index 43a87b9..c0e3635 100644
@@ -101,7 +101,7 @@ SECTIONS
 	___data_start = . ;
 
 	. = ALIGN(0x2000) ;
-		*(.data.init_task)
+		*(.data..init_task)
 	. = ALIGN(0x4) ;
 		DATA_DATA
 	. = ALIGN(0x4) ;
arch/ia64/include/asm/asmmacro.h +6 -6
index c1642fd..3ab6d75 100644
@@ -70,12 +70,12 @@ name:
  * path (ivt.S - TLB miss processing) or in places where it might not be
  * safe to use a "tpa" instruction (mca_asm.S - error recovery).
  */
-	.section ".data.patch.vtop", "a"	// declare section & section attributes
+	.section ".data..patch.vtop", "a"	// declare section & section attributes
 	.previous
 
 #define	LOAD_PHYSICAL(pr, reg, obj)		\
 [1:](pr)movl reg = obj;				\
-	.xdata4 ".data.patch.vtop", 1b-.
+	.xdata4 ".data..patch.vtop", 1b-.
 
 /*
  * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
@@ -84,11 +84,11 @@ name:
 #define DO_MCKINLEY_E9_WORKAROUND
 
 #ifdef DO_MCKINLEY_E9_WORKAROUND
-	.section ".data.patch.mckinley_e9", "a"
+	.section ".data..patch.mckinley_e9", "a"
 	.previous
 /* workaround for Itanium 2 Errata 9: */
 # define FSYS_RETURN					\
-	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
+	.xdata4 ".data..patch.mckinley_e9", 1f-.;	\
 1:{ .mib;						\
 	nop.m 0;					\
 	mov r16=ar.pfs;					\
@@ -107,11 +107,11 @@ name:
  * If physical stack register size is different from DEF_NUM_STACK_REG,
  * dynamically patch the kernel for correct size.
  */
-	.section ".data.patch.phys_stack_reg", "a"
+	.section ".data..patch.phys_stack_reg", "a"
 	.previous
 #define LOAD_PHYS_STACK_REG_SIZE(reg)			\
 [1:]	adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0;	\
-	.xdata4 ".data.patch.phys_stack_reg", 1b-.
+	.xdata4 ".data..patch.phys_stack_reg", 1b-.
 
 /*
  * Up until early 2004, use of .align within a function caused bad unwind info.
arch/ia64/include/asm/cache.h +1 -1
index e7482bd..988254a 100644
@@ -24,6 +24,6 @@
 # define SMP_CACHE_BYTES	(1 << 3)
 #endif
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #endif /* _ASM_IA64_CACHE_H */
arch/ia64/include/asm/percpu.h +1 -1
index 77f30b6..d9ec30b 100644
@@ -27,7 +27,7 @@ extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data.percpu")))
+#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data..percpu")))
 
 #define per_cpu_init()				(__phys_per_cpu_start)
 
arch/ia64/kernel/Makefile +1 -1
index c381ea9..61900c7 100644
@@ -72,7 +72,7 @@ GATECFLAGS_gate-syms.o = -r
 $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
 	$(call if_changed,gate)
 
-# gate-data.o contains the gate DSO image as data in section .data.gate.
+# gate-data.o contains the gate DSO image as data in section .data..gate.
 # We must build gate.so before we can assemble it.
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/gate-data.o: $(obj)/gate.so
arch/ia64/kernel/gate-data.S +1 -1
index 258c0a3..b3ef1c7 100644
@@ -1,3 +1,3 @@
-	.section .data.gate, "aw"
+	.section .data..gate, "aw"
 
 	.incbin "arch/ia64/kernel/gate.so"
arch/ia64/kernel/gate.S +4 -4
index 74b1ccc..8ecaf37 100644
@@ -20,18 +20,18 @@
  * to targets outside the shared object) and to avoid multi-phase kernel builds, we
  * simply create minimalistic "patch lists" in special ELF sections.
  */
-	.section ".data.patch.fsyscall_table", "a"
+	.section ".data..patch.fsyscall_table", "a"
 	.previous
 #define LOAD_FSYSCALL_TABLE(reg)			\
 [1:]	movl reg=0;					\
-	.xdata4 ".data.patch.fsyscall_table", 1b-.
+	.xdata4 ".data..patch.fsyscall_table", 1b-.
 
-	.section ".data.patch.brl_fsys_bubble_down", "a"
+	.section ".data..patch.brl_fsys_bubble_down", "a"
 	.previous
 #define BRL_COND_FSYS_BUBBLE_DOWN(pr)			\
 [1:](pr)brl.cond.sptk 0;				\
 	;;						\
-	.xdata4 ".data.patch.brl_fsys_bubble_down", 1b-.
+	.xdata4 ".data..patch.brl_fsys_bubble_down", 1b-.
 
 GLOBAL_ENTRY(__kernel_syscall_via_break)
 	.prologue
arch/ia64/kernel/gate.lds.S +5 -5
index 3cb1abc..9ef2444 100644
@@ -32,21 +32,21 @@ SECTIONS
 	 */
 	. = GATE_ADDR + 0x600;
 
-	.data.patch		: {
+	.data..patch		: {
 		__start_gate_mckinley_e9_patchlist = .;
-		*(.data.patch.mckinley_e9)
+		*(.data..patch.mckinley_e9)
 		__end_gate_mckinley_e9_patchlist = .;
 
 		__start_gate_vtop_patchlist = .;
-		*(.data.patch.vtop)
+		*(.data..patch.vtop)
 		__end_gate_vtop_patchlist = .;
 
 		__start_gate_fsyscall_patchlist = .;
-		*(.data.patch.fsyscall_table)
+		*(.data..patch.fsyscall_table)
 		__end_gate_fsyscall_patchlist = .;
 
 		__start_gate_brl_fsys_bubble_down_patchlist = .;
-		*(.data.patch.brl_fsys_bubble_down)
+		*(.data..patch.brl_fsys_bubble_down)
 		__end_gate_brl_fsys_bubble_down_patchlist = .;
 	}						:readable
 
arch/ia64/kernel/head.S +1 -1
index 59301c4..3617aaf 100644
@@ -181,7 +181,7 @@ swapper_pg_dir:
 halt_msg:
 	stringz "Halting kernel\n"
 
-	.section .text.head,"ax"
+	.section .text..head,"ax"
 
 	.global start_ap
 
arch/ia64/kernel/init_task.c +2 -2
index 5b0e830..8a5028c 100644
@@ -27,7 +27,7 @@ EXPORT_SYMBOL(init_mm);
  * Initial task structure.
  *
  * We need to make sure that this is properly aligned due to the way process stacks are
- * handled. This is done by having a special ".data.init_task" section...
+ * handled. This is done by having a special ".data..init_task" section...
  */
 #define init_thread_info	init_task_mem.s.thread_info
 
@@ -37,7 +37,7 @@ union {
 		struct thread_info thread_info;
 	} s;
 	unsigned long stack[KERNEL_STACK_SIZE/sizeof (unsigned long)];
-} init_task_mem asm ("init_task") __attribute__((section(".data.init_task"))) = {{
+} init_task_mem asm ("init_task") __attribute__((section(".data..init_task"))) = {{
 	.task =		INIT_TASK(init_task_mem.s.task),
 	.thread_info =	INIT_THREAD_INFO(init_task_mem.s.task)
 }};
arch/ia64/kernel/ivt.S +1 -1
index f675d8e..7214046 100644
@@ -83,7 +83,7 @@
 	mov r19=n;;			/* prepare to save predicates */		\
 	br.sptk.many dispatch_to_fault_handler
 
-	.section .text.ivt,"ax"
+	.section .text..ivt,"ax"
 
 	.align 32768	// align on 32KB boundary
 	.global ia64_ivt
arch/ia64/kernel/minstate.h +2 -2
index 292e214..d56753a 100644
@@ -16,7 +16,7 @@
 #define ACCOUNT_SYS_ENTER
 #endif
 
-.section ".data.patch.rse", "a"
+.section ".data..patch.rse", "a"
 .previous
 
 /*
@@ -215,7 +215,7 @@
 (pUStk) extr.u r17=r18,3,6;			\
 (pUStk)	sub r16=r18,r22;			\
 [1:](pKStk)	br.cond.sptk.many 1f;		\
-	.xdata4 ".data.patch.rse",1b-.		\
+	.xdata4 ".data..patch.rse",1b-.		\
 	;;					\
 	cmp.ge p6,p7 = 33,r17;			\
 	;;					\
arch/ia64/kernel/paravirtentry.S +1 -1
index 2f42fcb..d778e8b 100644
@@ -25,7 +25,7 @@
 #include "entry.h"
 
 #define DATA8(sym, init_value)			\
-	.pushsection .data.read_mostly ;	\
+	.pushsection .data..read_mostly ;	\
 	.align 8 ;				\
 	.global sym ;				\
 	sym: ;					\
arch/ia64/kernel/vmlinux.lds.S +24 -24

112 lines not on this page · raw message

arch/ia64/kvm/vmm_ivt.S +1 -1
index 3ef1a01..c5ab23b 100644
@@ -104,7 +104,7 @@ GLOBAL_ENTRY(kvm_vmm_panic)
 	br.call.sptk.many b6=vmm_panic_handler;
 END(kvm_vmm_panic)
 
-    .section .text.ivt,"ax"
+    .section .text..ivt,"ax"
 
     .align 32768    // align on 32KB boundary
     .global kvm_ia64_ivt
arch/ia64/xen/xensetup.S +1 -1
index 28fed1f..28def53 100644
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <xen/interface/elfnote.h>
 
-	.section .data.read_mostly
+	.section .data..read_mostly
 	.align 8
 	.global xen_domain_type
 xen_domain_type:
arch/m32r/kernel/head.S +1 -1
index 9091606..2bac669 100644
@@ -23,7 +23,7 @@ __INITDATA
 /*
  * References to members of the boot_cpu_data structure.
  */
-.section .text.head, "ax"
+.section .text..head, "ax"
 	.global	start_kernel
 	.global __bss_start
 	.global _end
arch/m32r/kernel/init_task.c +1 -1
index 016885c..7c24cec 100644
@@ -25,7 +25,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/m32r/kernel/vmlinux.lds.S +4 -4
index 9db05df..2bcc37e 100644
@@ -27,7 +27,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
-	*(.text.head)
+	*(.text..head)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
@@ -57,17 +57,17 @@ SECTIONS
 
   . = ALIGN(4096);
   __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
+  .data_nosave : { *(.data..nosave) }
   . = ALIGN(4096);
   __nosave_end = .;
 
   . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+  .data..cacheline_aligned : { *(.data..cacheline_aligned) }
 
   _edata = .;			/* End of data section */
 
   . = ALIGN(8192);		/* init_task */
-  .data.init_task : { *(.data.init_task) }
+  .data..init_task : { *(.data..init_task) }
 
   /* will be freed after init */
   . = ALIGN(4096);		/* Init code and data */
arch/m68k/kernel/head.S +1 -1
index f513f53..bdb247e 100644
@@ -577,7 +577,7 @@ func_define	putn,1
 #endif
 .endm
 
-.section ".text.head","ax"
+.section ".text..head","ax"
 ENTRY(_stext)
 /*
  * Version numbers of the bootinfo interface
arch/m68k/kernel/process.c +1 -1
index 632ce01..b3c78d9 100644
@@ -47,7 +47,7 @@ struct mm_struct init_mm = INIT_MM(init_mm);
 EXPORT_SYMBOL(init_mm);
 
 union thread_union init_thread_union
-__attribute__((section(".data.init_task"), aligned(THREAD_SIZE)))
+__attribute__((section(".data..init_task"), aligned(THREAD_SIZE)))
        = { INIT_THREAD_INFO(init_task) };
 
 /* initial task structure */
arch/m68k/kernel/sun3-head.S +1 -1
index aad0159..5a6714b 100644
@@ -29,7 +29,7 @@ kernel_pmd_table:              .skip 0x2000
 .globl kernel_pg_dir
 .equ    kernel_pg_dir,kernel_pmd_table
 
-	.section .text.head
+	.section .text..head
 ENTRY(_stext)
 ENTRY(_start)
 
arch/m68k/kernel/vmlinux-std.lds +3 -3
index f846d4e..35b6da8 100644
@@ -12,7 +12,7 @@ SECTIONS
   . = 0x1000;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(.text.head)
+	*(.text..head)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
@@ -35,7 +35,7 @@ SECTIONS
 	}
 
   . = ALIGN(16);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+  .data..cacheline_aligned : { *(.data..cacheline_aligned) }
 
   .bss : { *(.bss) }		/* BSS */
 
@@ -78,7 +78,7 @@ SECTIONS
   . = ALIGN(8192);
   __init_end = .;
 
-  .data.init_task : { *(.data.init_task) }	/* The initial task and kernel stack */
+  .data..init_task : { *(.data..init_task) }	/* The initial task and kernel stack */
 
   _end = . ;
 
arch/m68k/kernel/vmlinux-sun3.lds +2 -2
index d9368c0..e6ce561 100644
@@ -12,7 +12,7 @@ SECTIONS
   . = 0xE002000;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(.text.head)
+	*(.text..head)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
@@ -70,7 +70,7 @@ __init_begin = .;
 #endif
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
-	.data.init.task : { *(.data.init_task) }
+	.data..init.task : { *(.data..init_task) }
 
 
   .bss : { *(.bss) }		/* BSS */
arch/m68knommu/kernel/init_task.c +1 -1
index fe282de..1ea36d6 100644
@@ -36,6 +36,6 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
arch/m68knommu/kernel/vmlinux.lds.S +3 -3
index 69ba9b1..bdf9b1c 100644
@@ -55,7 +55,7 @@ SECTIONS {
 	.romvec : {
 		__rom_start = . ;
 		_romvec = .;
-		*(.data.initvect)
+		*(.data..initvect)
 	} > romvec
 #endif
 
@@ -66,7 +66,7 @@ SECTIONS {
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-        	*(.text.lock)
+		*(.text..lock)
 
 		. = ALIGN(16);          /* Exception table              */
 		__start___ex_table = .;
@@ -148,7 +148,7 @@ SECTIONS {
 		_sdata = . ;
 		DATA_DATA
 		. = ALIGN(8192) ;
-		*(.data.init_task)
+		*(.data..init_task)
 		_edata = . ;
 	} > DATA
 
arch/m68knommu/platform/68360/head-ram.S +1 -1
index 2ef0624..8eb94fb 100644
@@ -280,7 +280,7 @@ _dprbase:
      * and then overwritten as needed.
      */
  
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
     .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
     .long   _start      /* Reset: Initial Program Counter               - 1.  */
     .long   buserr      /* Bus Error                                    - 2.  */
arch/m68knommu/platform/68360/head-rom.S +1 -1
index 62ecf41..97510e5 100644
@@ -291,7 +291,7 @@ _dprbase:
      * and then overwritten as needed.
      */
  
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
     .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
     .long   _start      /* Reset: Initial Program Counter               - 1.  */
     .long   buserr      /* Bus Error                                    - 2.  */
arch/mips/kernel/init_task.c +1 -1
index 149cd91..acb71af 100644
@@ -26,7 +26,7 @@ EXPORT_SYMBOL(init_mm);
  * The things we do for performance..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"),
+	__attribute__((__section__(".data..init_task"),
 	               __aligned__(THREAD_SIZE))) =
 		{ INIT_THREAD_INFO(init_task) };
 
arch/mips/kernel/vmlinux.lds.S +4 -4
index 58738c8..6b302c7 100644
@@ -77,7 +77,7 @@ SECTIONS
 		 * object file alignment.  Using 32768
 		 */
 		. = ALIGN(_PAGE_SIZE);
-		*(.data.init_task)
+		*(.data..init_task)
 
 		DATA_DATA
 		CONSTRUCTORS
@@ -99,14 +99,14 @@ SECTIONS
 	. = ALIGN(_PAGE_SIZE);
 	.data_nosave : {
 		__nosave_begin = .;
-		*(.data.nosave)
+		*(.data..nosave)
 	}
 	. = ALIGN(_PAGE_SIZE);
 	__nosave_end = .;
 
 	. = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
+	.data..cacheline_aligned : {
+		*(.data..cacheline_aligned)
 	}
 	_edata =  .;			/* End of data section */
 
arch/mips/lasat/image/head.S +1 -1
index efb95f2..e0ecda9 100644
@@ -1,7 +1,7 @@
 #include <asm/lasat/head.h>
 
 	.text
-	.section .text.start, "ax"
+	.section .text..start, "ax"
 	.set noreorder
 	.set mips3
 
arch/mips/lasat/image/romscript.normal +1 -1
index 988f8ad..0864c96 100644
@@ -4,7 +4,7 @@ SECTIONS
 {
   .text :
   {
-    *(.text.start)
+    *(.text..start)
   }
 
   /* Data in ROM */
arch/mn10300/kernel/head.S +1 -1
index 606bd8c..dd0db5f 100644
@@ -19,7 +19,7 @@
 #include <asm/param.h>
 #include <asm/unit/serial.h>
 
-	.section .text.head,"ax"
+	.section .text..head,"ax"
 
 ###############################################################################
 #
arch/mn10300/kernel/init_task.c +1 -1
index 5ac3566..599840f 100644
@@ -31,7 +31,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/mn10300/kernel/vmlinux.lds.S +8 -8
index b825966..938792a 100644
@@ -28,7 +28,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .text : {
 	*(
-	.text.head
+	.text..head
 	.text
 	)
 	TEXT_TEXT
@@ -58,25 +58,25 @@ SECTIONS
 
   . = ALIGN(PAGE_SIZE);
   __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
+  .data_nosave : { *(.data..nosave) }
   . = ALIGN(PAGE_SIZE);
   __nosave_end = .;
 
   . = ALIGN(PAGE_SIZE);
-  .data.page_aligned : { *(.data.idt) }
+  .data..page_aligned : { *(.data..idt) }
 
   . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+  .data..cacheline_aligned : { *(.data..cacheline_aligned) }
 
   /* rarely changed data like cpu maps */
   . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly)) {
-	*(.data.read_mostly)
+  .data..read_mostly : AT(ADDR(.data..read_mostly)) {
+	*(.data..read_mostly)
 	_edata = .;		/* End of data section */
   }
 
   . = ALIGN(THREAD_SIZE);	/* init_task */
-  .data.init_task : { *(.data.init_task) }
+  .data..init_task : { *(.data..init_task) }
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
@@ -134,7 +134,7 @@ SECTIONS
 
   __bss_start = .;		/* BSS */
   .bss : {
-	*(.bss.page_aligned)
+	*(.bss..page_aligned)
 	*(.bss)
   }
   . = ALIGN(4);
arch/parisc/include/asm/cache.h +1 -1
index 32c2cca..45effe6 100644
@@ -28,7 +28,7 @@
 
 #define SMP_CACHE_BYTES L1_CACHE_BYTES
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 void parisc_cache_init(void);	/* initializes cache-flushing */
 void disable_sr_hashing_asm(int); /* low level support for above */
arch/parisc/include/asm/system.h +1 -1
index ee80c92..7ccaf29 100644
@@ -174,7 +174,7 @@ static inline void set_eiem(unsigned long val)
 })
 
 #ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
+# define __lock_aligned __attribute__((__section__(".data..lock_aligned")))
 #endif
 
 #define arch_align_stack(x) (x)
arch/parisc/kernel/head.S +1 -1
index 0e3d9f9..4dbdf0e 100644
@@ -345,7 +345,7 @@ smp_slave_stext:
 ENDPROC(stext)
 
 #ifndef CONFIG_64BIT
-	.section .data.read_mostly
+	.section .data..read_mostly
 
 	.align	4
 	.export	$global$,data
arch/parisc/kernel/init_task.c +4 -4
index 1e25a45..14394c0 100644
@@ -48,7 +48,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
+	__attribute__((aligned(128))) __attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 #if PT_NLEVELS == 3
@@ -57,11 +57,11 @@ union thread_union init_thread_union
  * guarantee that global objects will be laid out in memory in the same order 
  * as the order of declaration, so put these in different sections and use
  * the linker script to order them. */
-pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE)));
+pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data..vm0.pmd"), aligned(PAGE_SIZE)));
 #endif
 
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE)));
-pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE)));
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data..vm0.pgd"), aligned(PAGE_SIZE)));
+pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pte"), aligned(PAGE_SIZE)));
 
 /*
  * Initial task structure.
arch/parisc/kernel/vmlinux.lds.S +13 -13
index 1a3b6cc..b26eb05 100644
@@ -94,8 +94,8 @@ SECTIONS
 
 	/* rarely changed data like cpu maps */
 	. = ALIGN(16);
-	.data.read_mostly : {
-		*(.data.read_mostly)
+	.data..read_mostly : {
+		*(.data..read_mostly)
 	}
 
 	. = ALIGN(L1_CACHE_BYTES);
@@ -106,14 +106,14 @@ SECTIONS
 	}
 
 	. = ALIGN(L1_CACHE_BYTES);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
+	.data..cacheline_aligned : {
+		*(.data..cacheline_aligned)
 	}
 
 	/* PA-RISC locks requires 16-byte alignment */
 	. = ALIGN(16);
-	.data.lock_aligned : {
-		*(.data.lock_aligned)
+	.data..lock_aligned : {
+		*(.data..lock_aligned)
 	}
 
 	/* nosave data is really only used for software suspend...it's here
@@ -122,7 +122,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__nosave_begin = .;
 	.data_nosave : {
-		*(.data.nosave)
+		*(.data..nosave)
 	}
 	. = ALIGN(PAGE_SIZE);
 	__nosave_end = .;
@@ -134,10 +134,10 @@ SECTIONS
 	__bss_start = .;
 	/* page table entries need to be PAGE_SIZE aligned */
 	. = ALIGN(PAGE_SIZE);
-	.data.vmpages : {
-		*(.data.vm0.pmd)
-		*(.data.vm0.pgd)
-		*(.data.vm0.pte)
+	.data..vmpages : {
+		*(.data..vm0.pmd)
+		*(.data..vm0.pgd)
+		*(.data..vm0.pte)
 	}
 	.bss : {
 		*(.bss)
@@ -149,8 +149,8 @@ SECTIONS
 	/* assembler code expects init_task to be 16k aligned */
 	. = ALIGN(16384);
 	/* init_task */
-	.data.init_task : {
-		*(.data.init_task)
+	.data..init_task : {
+		*(.data..init_task)
 	}
 
 #ifdef CONFIG_64BIT
arch/powerpc/include/asm/cache.h +1 -1
index 81de6eb..3f41ab9 100644
@@ -38,7 +38,7 @@ extern struct ppc64_caches ppc64_caches;
 #endif /* __powerpc64__ && ! __ASSEMBLY__ */
 
 #if !defined(__ASSEMBLY__)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 #endif
 
 #endif /* __KERNEL__ */
arch/powerpc/include/asm/page_64.h +1 -1
index 043bfdf..2307910 100644
@@ -157,7 +157,7 @@ do {						\
 #else
 #define __page_aligned \
 	__attribute__((__aligned__(PAGE_SIZE), \
-		__section__(".data.page_aligned")))
+		__section__(".data..page_aligned")))
 #endif
 
 #define VM_DATA_DEFAULT_FLAGS \
arch/powerpc/include/asm/ppc_asm.h +2 -2
index 1a0d628..c4759df 100644
@@ -193,7 +193,7 @@ name: \
 GLUE(.,name):
 
 #define _INIT_GLOBAL(name) \
-	.section ".text.init.refok"; \
+	.section ".text..init.refok"; \
 	.align 2 ; \
 	.globl name; \
 	.globl GLUE(.,name); \
@@ -233,7 +233,7 @@ name: \
 GLUE(.,name):
 
 #define _INIT_STATIC(name) \
-	.section ".text.init.refok"; \
+	.section ".text..init.refok"; \
 	.align 2 ; \
 	.section ".opd","aw"; \
 name: \
arch/powerpc/kernel/head_32.S +1 -1
index a1c4cfd..21a625a 100644
@@ -50,7 +50,7 @@
 	mtspr	SPRN_DBAT##n##L,RB;	\
 1:
 
-	.section	.text.head, "ax"
+	.section	.text..head, "ax"
 	.stabs	"arch/powerpc/kernel/",N_SO,0,0,0f
 	.stabs	"head_32.S",N_SO,0,0,0f
 0:
arch/powerpc/kernel/head_40x.S +1 -1
index 56d8e5d..de69ecd 100644
@@ -52,7 +52,7 @@
  *
  * This is all going to change RSN when we add bi_recs.......  -- Dan
  */
-	.section	.text.head, "ax"
+	.section	.text..head, "ax"
 _ENTRY(_stext);
 _ENTRY(_start);
 
arch/powerpc/kernel/head_44x.S +1 -1
index b56fecc..ab0b339 100644
@@ -50,7 +50,7 @@
  *   r7 - End of kernel command line string
  *
  */
-	.section	.text.head, "ax"
+	.section	.text..head, "ax"
 _ENTRY(_stext);
 _ENTRY(_start);
 	/*
arch/powerpc/kernel/head_8xx.S +1 -1
index 3c9452d..f6d1e67 100644
@@ -38,7 +38,7 @@
 #else
 #define DO_8xx_CPU6(val, reg)
 #endif
-	.section	.text.head, "ax"
+	.section	.text..head, "ax"
 _ENTRY(_stext);
 _ENTRY(_start);
 
arch/powerpc/kernel/head_fsl_booke.S +1 -1
index 36ffb35..69a93e2 100644
@@ -53,7 +53,7 @@
  *   r7 - End of kernel command line string
  *
  */
-	.section	.text.head, "ax"
+	.section	.text..head, "ax"
 _ENTRY(_stext);
 _ENTRY(_start);
 	/*
arch/powerpc/kernel/init_task.c +1 -1
index 688b329..1162c3c 100644
@@ -21,7 +21,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/powerpc/kernel/machine_kexec_64.c +1 -1
index 49e705f..815a13c 100644
@@ -250,7 +250,7 @@ static void kexec_prepare_cpus(void)
  * current, but that audit has not been performed.
  */
 static union thread_union kexec_stack
-	__attribute__((__section__(".data.init_task"))) = { };
+	__attribute__((__section__(".data..init_task"))) = { };
 
 /* Our assembly helper, in kexec_stub.S */
 extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
arch/powerpc/kernel/vdso.c +1 -1
index ad06d5c..6685af8 100644
@@ -74,7 +74,7 @@ static int vdso_ready;
 static union {
 	struct vdso_data	data;
 	u8			page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __attribute__((__section__(".data..page_aligned")));
 struct vdso_data *vdso_data = &vdso_data_store.data;
 
 /* Format of the patch table */
arch/powerpc/kernel/vdso32/vdso32_wrapper.S +1 -1
index 556f0ca..10f61ac 100644
@@ -1,7 +1,7 @@
 #include <linux/init.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	.section ".data..page_aligned"
 
 	.globl vdso32_start, vdso32_end
 	.balign PAGE_SIZE
arch/powerpc/kernel/vdso64/vdso64_wrapper.S +1 -1
index 0529cb9..3c1cc59 100644
@@ -1,7 +1,7 @@
 #include <linux/init.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	.section ".data..page_aligned"
 
 	.globl vdso64_start, vdso64_end
 	.balign PAGE_SIZE
arch/powerpc/kernel/vmlinux.lds.S +14 -14
index 161b9b9..f8fa660 100644
@@ -52,9 +52,9 @@ SECTIONS
 	/* Text and gots */
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		ALIGN_FUNCTION();
-		*(.text.head)
+		*(.text..head)
 		_text = .;
-		*(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
+		*(.text .fixup .text..init.refok .text..exit.refok __ftr_alt_*)
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
@@ -182,10 +182,10 @@ SECTIONS
 	}
 #endif
 	. = ALIGN(PAGE_SIZE);
-	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
+	.data..percpu  : AT(ADDR(.data..percpu) - LOAD_OFFSET) {
 		__per_cpu_start = .;
-		*(.data.percpu)
-		*(.data.percpu.shared_aligned)
+		*(.data..percpu)
+		*(.data..percpu.shared_aligned)
 		__per_cpu_end = .;
 	}
 
@@ -259,28 +259,28 @@ SECTIONS
 #else
 	. = ALIGN(16384);
 #endif
-	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		*(.data.init_task)
+	.data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) {
+		*(.data..init_task)
 	}
 
 	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-		*(.data.page_aligned)
+	.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
+		*(.data..page_aligned)
 	}
 
-	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-		*(.data.cacheline_aligned)
+	.data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
+		*(.data..cacheline_aligned)
 	}
 
 	. = ALIGN(L1_CACHE_BYTES);
-	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-		*(.data.read_mostly)
+	.data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
+		*(.data..read_mostly)
 	}
 
 	. = ALIGN(PAGE_SIZE);
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
 		__nosave_begin = .;
-		*(.data.nosave)
+		*(.data..nosave)
 		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 	}
arch/s390/include/asm/cache.h +1 -1
index 9b86681..24aafa6 100644
@@ -14,6 +14,6 @@
 #define L1_CACHE_BYTES     256
 #define L1_CACHE_SHIFT     8
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #endif
arch/s390/kernel/head.S +1 -1
index ec7e35f..322b3b2 100644
@@ -35,7 +35,7 @@
 #define ARCH_OFFSET	0
 #endif
 
-.section ".text.head","ax"
+.section ".text..head","ax"
 #ifndef CONFIG_IPL
 	.org   0
 	.long  0x00080000,0x80000000+startup	# Just a restart PSW
arch/s390/kernel/init_task.c +1 -1
index 7db95c0..7cfd9af 100644
@@ -30,7 +30,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/s390/kernel/vdso.c +1 -1
index 690e178..2384c7e 100644
@@ -64,7 +64,7 @@ __setup("vdso=", vdso_setup);
 static union {
 	struct vdso_data	data;
 	u8			page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __attribute__((__section__(".data..page_aligned")));
 struct vdso_data *vdso_data = &vdso_data_store.data;
 
 /*
arch/s390/kernel/vdso32/vdso32_wrapper.S +1 -1
index 61639a8..025cb77 100644
@@ -1,7 +1,7 @@
 #include <linux/init.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	.section ".data..page_aligned"
 
 	.globl vdso32_start, vdso32_end
 	.balign PAGE_SIZE
arch/s390/kernel/vdso64/vdso64_wrapper.S +1 -1
index d8e2ac1..d26126d 100644
@@ -1,7 +1,7 @@
 #include <linux/init.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	.section ".data..page_aligned"
 
 	.globl vdso64_start, vdso64_end
 	.balign PAGE_SIZE
arch/s390/kernel/vmlinux.lds.S +10 -10
index d796d05..41f1d6a 100644
@@ -29,7 +29,7 @@ SECTIONS
 	. = 0x00000000;
 	.text : {
 	_text = .;		/* Text and read-only data */
-		*(.text.head)
+		*(.text..head)
 	TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
@@ -66,30 +66,30 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	.data_nosave : {
 	__nosave_begin = .;
-		*(.data.nosave)
+		*(.data..nosave)
 	}
 	. = ALIGN(PAGE_SIZE);
 	__nosave_end = .;
 
 	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.idt)
+	.data..page_aligned : {
+		*(.data..idt)
 	}
 
 	. = ALIGN(0x100);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
+	.data..cacheline_aligned : {
+		*(.data..cacheline_aligned)
 	}
 
 	. = ALIGN(0x100);
-	.data.read_mostly : {
-		*(.data.read_mostly)
+	.data..read_mostly : {
+		*(.data..read_mostly)
 	}
 	_edata = .;		/* End of data section */
 
 	. = ALIGN(THREAD_SIZE);	/* init_task */
-	.data.init_task : {
-		*(.data.init_task)
+	.data..init_task : {
+		*(.data..init_task)
 	}
 
 	/* will be freed after init */
arch/sh/include/asm/cache.h +1 -1
index 02df18e..455a9a9 100644
@@ -14,7 +14,7 @@
 
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #ifndef __ASSEMBLY__
 struct cache_info {
arch/sh/kernel/cpu/sh5/entry.S +2 -2
index e640c63..433de32 100644
@@ -2058,10 +2058,10 @@ asm_uaccess_end:
 
 
 /*
- * --- .text.init Section
+ * --- .text..init Section
  */
 
-	.section	.text.init, "ax"
+	.section	.text..init, "ax"
 
 /*
  * void trap_init (void)
arch/sh/kernel/head_32.S +1 -1
index 788605f..4065946 100644
@@ -40,7 +40,7 @@ ENTRY(empty_zero_page)
 1:
 	.skip	PAGE_SIZE - empty_zero_page - 1b
 
-	.section	.text.head, "ax"
+	.section	.text..head, "ax"
 
 /*
  * Condition at the entry of _stext:
arch/sh/kernel/head_64.S +1 -1
index 7ccfb99..c3543d1 100644
@@ -110,7 +110,7 @@ empty_bad_pte_table:
 fpu_in_use:	.quad	0
 
 
-	.section	.text.head, "ax"
+	.section	.text..head, "ax"
 	.balign L1_CACHE_BYTES
 /*
  * Condition at the entry of __stext:
arch/sh/kernel/init_task.c +1 -1
index 80c35ff..af29479 100644
@@ -21,7 +21,7 @@ EXPORT_SYMBOL(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
arch/sh/kernel/irq.c +2 -2
index 64b7690..acf65fb 100644
@@ -158,10 +158,10 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 
 #ifdef CONFIG_IRQSTACKS
 static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
+		__attribute__((__section__(".bss..page_aligned")));
 
 static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
+		__attribute__((__section__(".bss..page_aligned")));
 
 /*
  * allocate per-cpu stacks for hardirq and for softirq processing
arch/sh/kernel/vmlinux_32.lds.S +7 -7
index 7b4b82b..5add714 100644
@@ -28,7 +28,7 @@ SECTIONS
 	} = 0
 
 	.text : {
-		*(.text.head)
+		*(.text..head)
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
@@ -58,19 +58,19 @@ SECTIONS
 
 	. = ALIGN(THREAD_SIZE);
 	.data : {			/* Data */
-		*(.data.init_task)
+		*(.data..init_task)
 
 		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.cacheline_aligned)
+		*(.data..cacheline_aligned)
 
 		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.read_mostly)
+		*(.data..read_mostly)
 
 		. = ALIGN(PAGE_SIZE);
-		*(.data.page_aligned)
+		*(.data..page_aligned)
 
 		__nosave_begin = .;
-		*(.data.nosave)
+		*(.data..nosave)
 		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
@@ -128,7 +128,7 @@ SECTIONS
 	.bss : {
 		__init_end = .;
 		__bss_start = .;		/* BSS */
-		*(.bss.page_aligned)
+		*(.bss..page_aligned)
 		*(.bss)
 		*(COMMON)
 		. = ALIGN(4);
arch/sh/kernel/vmlinux_64.lds.S +7 -7
index 33fa464..c7d5f5b 100644
@@ -42,7 +42,7 @@ SECTIONS
 	} = 0
 
 	.text : C_PHYS(.text) {
-		*(.text.head)
+		*(.text..head)
 		TEXT_TEXT
 		*(.text64)
 		*(.text..SHmedia32)
@@ -70,19 +70,19 @@ SECTIONS
 
 	. = ALIGN(THREAD_SIZE);
 	.data : C_PHYS(.data) {			/* Data */
-		*(.data.init_task)
+		*(.data..init_task)
 
 		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.cacheline_aligned)
+		*(.data..cacheline_aligned)
 
 		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.read_mostly)
+		*(.data..read_mostly)
 
 		. = ALIGN(PAGE_SIZE);
-		*(.data.page_aligned)
+		*(.data..page_aligned)
 
 		__nosave_begin = .;
-		*(.data.nosave)
+		*(.data..nosave)
 		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
@@ -140,7 +140,7 @@ SECTIONS
 	.bss : C_PHYS(.bss) {
 		__init_end = .;
 		__bss_start = .;		/* BSS */
-		*(.bss.page_aligned)
+		*(.bss..page_aligned)
 		*(.bss)
 		*(COMMON)
 		. = ALIGN(4);
arch/sparc/boot/btfixupprep.c +2 -2
index 52a4208..e899f2a 100644
@@ -171,7 +171,7 @@ main1:
 			}
 		} else if (buffer[nbase+4] != '_')
 			continue;
-		if (!strcmp (sect, ".text.exit"))
+		if (!strcmp (sect, ".text..exit"))
 			continue;
 		if (strcmp (sect, ".text") &&
 		    strcmp (sect, ".init.text") &&
@@ -325,7 +325,7 @@ main1:
 		(*rr)->next = NULL;
 	}
 	printf("! Generated by btfixupprep. Do not edit.\n\n");
-	printf("\t.section\t\".data.init\",#alloc,#write\n\t.align\t4\n\n");
+	printf("\t.section\t\".data..init\",#alloc,#write\n\t.align\t4\n\n");
 	printf("\t.global\t___btfixup_start\n___btfixup_start:\n\n");
 	for (i = 0; i < last; i++) {
 		f = array + i;
arch/sparc/include/asm/cache.h +1 -1
index 41f85ae..2909f0a 100644
@@ -19,7 +19,7 @@
 
 #define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #ifdef CONFIG_SPARC32
 #include <asm/asi.h>
arch/sparc/kernel/head_32.S +2 -2
index f0b4b51..0ca3dc5 100644
@@ -72,7 +72,7 @@ sun4e_notsup:
 	.align 4
 
 	/* The Sparc trap table, bootloader gives us control at _start. */
-	.section .text.head,"ax"
+	.section .text..head,"ax"
 	.globl	start, _stext, _start, __stext
 	.globl  trapbase
 _start:   /* danger danger */
@@ -735,7 +735,7 @@ go_to_highmem:
 		 nop
 
 /* The code above should be at beginning and we have to take care about
- * short jumps, as branching to .text.init section from .text is usually
+ * short jumps, as branching to .text..init section from .text is usually
  * impossible */
 		__INIT
 /* Acquire boot time privileged register values, this will help debugging.
arch/sparc/kernel/head_64.S +1 -1
index a46c3a2..ad713f6 100644
@@ -467,7 +467,7 @@ jump_to_sun4u_init:
 	jmpl    %g2 + %g0, %g0
 	 nop
 
-	.section	.text.init.refok
+	.section	.text..init.refok
 sun4u_init:
 	BRANCH_IF_SUN4V(g1, sun4v_init)
 
arch/sparc/kernel/init_task.c +1 -1
index f28cb82..7f7a468 100644
@@ -22,5 +22,5 @@ EXPORT_SYMBOL(init_task);
  * in etrap.S which assumes it.
  */
 union thread_union init_thread_union
-	__attribute__((section (".data.init_task")))
+	__attribute__((section (".data..init_task")))
 	= { INIT_THREAD_INFO(init_task) };
arch/sparc/kernel/vmlinux.lds.S +7 -7
index 7626708..66eddbe 100644
@@ -41,7 +41,7 @@ SECTIONS
 	.text TEXTSTART :
 	{
 		_text = .;
-		*(.text.head)
+		*(.text..head)
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
@@ -59,20 +59,20 @@ SECTIONS
 		*(.data1)
 	}
 	. = ALIGN(SMP_CACHE_BYTES);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
+	.data..cacheline_aligned : {
+		*(.data..cacheline_aligned)
 	}
 	. = ALIGN(SMP_CACHE_BYTES);
-	.data.read_mostly : {
-		*(.data.read_mostly)
+	.data..read_mostly : {
+		*(.data..read_mostly)
 	}
 	/* End of data section */
 	_edata = .;
 
 	/* init_task */
 	. = ALIGN(THREAD_SIZE);
-	.data.init_task : {
-		*(.data.init_task)
+	.data..init_task : {
+		*(.data..init_task)
 	}
 	.fixup : {
 		__start___fixup = .;
arch/um/include/asm/common.lds.S +2 -2
index cb02486..b623606 100644
@@ -49,9 +49,9 @@
   }
 
   . = ALIGN(32);
-  .data.percpu : {
+  .data..percpu : {
 	__per_cpu_start = . ;
-	*(.data.percpu)
+	*(.data..percpu)
 	__per_cpu_end = . ;
   }
 	
arch/um/kernel/dyn.lds.S +2 -2
index 9975e1a..a415658 100644
@@ -97,9 +97,9 @@ SECTIONS
   .fini_array     : { *(.fini_array) }
   .data           : {
     . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    *(.data..init_task)
     . = ALIGN(KERNEL_STACK_SIZE);
-    *(.data.init_irqstack)
+    *(.data..init_irqstack)
     DATA_DATA
     *(.data.* .gnu.linkonce.d.*)
     SORT(CONSTRUCTORS)
arch/um/kernel/init_task.c +2 -2
index 806d381..eed073e 100644
@@ -34,9 +34,9 @@ EXPORT_SYMBOL(init_task);
  */
 
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 union thread_union cpu0_irqstack
-	__attribute__((__section__(".data.init_irqstack"))) =
+	__attribute__((__section__(".data..init_irqstack"))) =
 		{ INIT_THREAD_INFO(init_task) };
arch/um/kernel/uml.lds.S +2 -2
index 11b8352..7b03348 100644
@@ -53,9 +53,9 @@ SECTIONS
   .data    :
   {
     . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    *(.data..init_task)
     . = ALIGN(KERNEL_STACK_SIZE);
-    *(.data.init_irqstack)
+    *(.data..init_irqstack)
     DATA_DATA
     *(.gnu.linkonce.d*)
     CONSTRUCTORS
arch/x86/boot/compressed/head_32.S +1 -1
index 29c5fbf..b085d1f 100644
@@ -29,7 +29,7 @@
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head","ax",@progbits
+.section ".text..head","ax",@progbits
 	.globl startup_32
 
 startup_32:
arch/x86/boot/compressed/head_64.S +1 -1
index 1d5dff4..e3b4559 100644
@@ -33,7 +33,7 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head"
+.section ".text..head"
 	.code32
 	.globl startup_32
 
arch/x86/boot/compressed/relocs.c +1 -1
index 857e492..af8b9c5 100644
@@ -559,7 +559,7 @@ static void emit_relocs(int as_text)
 		/* Print the relocations in a form suitable that
 		 * gas will like.
 		 */
-		printf(".section \".data.reloc\",\"a\"\n");
+		printf(".section \".data..reloc\",\"a\"\n");
 		printf(".balign 4\n");
 		for (i = 0; i < reloc_count; i++) {
 			printf("\t .long 0x%08lx\n", relocs[i]);
arch/x86/boot/compressed/vmlinux.scr +1 -1
index f02382a..862d748 100644
@@ -1,6 +1,6 @@
 SECTIONS
 {
-  .rodata.compressed : {
+  .rodata..compressed : {
 	input_len = .;
 	LONG(input_data_end - input_data) input_data = .;
 	*(.data)
arch/x86/boot/compressed/vmlinux_32.lds +10 -4
index bb3c483..d70318a 100644
@@ -7,13 +7,13 @@ SECTIONS
 	 * address 0.
 	 */
 	. = 0;
-	.text.head : {
+	.text..head : {
 		_head = . ;
-		*(.text.head)
+		*(.text..head)
 		_ehead = . ;
 	}
-	.rodata.compressed : {
-		*(.rodata.compressed)
+	.rodata..compressed : {
+		*(.rodata..compressed)
 	}
 	.text :	{
 		_text = .; 	/* Text */
@@ -21,6 +21,10 @@ SECTIONS
 		*(.text.*)
 		_etext = . ;
 	}
+	.got : {
+		*(.got)
+		*(.got.*)
+	}
 	.rodata : {
 		_rodata = . ;
 		*(.rodata)	 /* read-only data */
@@ -40,4 +44,6 @@ SECTIONS
 		*(COMMON)
 		_end = . ;
 	}
+	/* Be bold, and discard everything not explicitly mentioned */
+	/DISCARD/ : { *(*) }
 }
arch/x86/boot/compressed/vmlinux_64.lds +6 -4
index bef1ac8..d3d1468 100644
@@ -7,13 +7,13 @@ SECTIONS
 	 * address 0.
 	 */
 	. = 0;
-	.text.head : {
+	.text..head : {
 		_head = . ;
-		*(.text.head)
+		*(.text..head)
 		_ehead = . ;
 	}
-	.rodata.compressed : {
-		*(.rodata.compressed)
+	.rodata..compressed : {
+		*(.rodata..compressed)
 	}
 	.text :	{
 		_text = .; 	/* Text */
@@ -45,4 +45,6 @@ SECTIONS
 		. = . + 4096 * 6;
 		_ebss = .;
 	}
+	/* Be bold, and discard everything not explicitly mentioned */
+	/DISCARD/ : { *(*) }
 }
arch/x86/include/asm/cache.h +2 -2
index 5d367ca..6b94d49 100644
@@ -5,7 +5,7 @@
 #define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #ifdef CONFIG_X86_VSMP
 /* vSMP Internode cacheline shift */
@@ -13,7 +13,7 @@
 #ifdef CONFIG_SMP
 #define __cacheline_aligned_in_smp					\
 	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))	\
-	__attribute__((__section__(".data.page_aligned")))
+	__attribute__((__section__(".data..page_aligned")))
 #endif
 #endif
 
arch/x86/kernel/acpi/wakeup_32.S +1 -1
index a12e6a9..b3f6fbf 100644
@@ -1,4 +1,4 @@
-	.section .text.page_aligned
+	.section .text..page_aligned
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page.h>
arch/x86/kernel/head_32.S +3 -3
index e835b4e..65b23f8 100644
@@ -81,7 +81,7 @@ INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_
  * any particular GDT layout, because we load our own as soon as we
  * can.
  */
-.section .text.head,"ax",@progbits
+.section .text..head,"ax",@progbits
 ENTRY(startup_32)
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 		us to not reload segments */
@@ -609,7 +609,7 @@ ENTRY(_stext)
 /*
  * BSS section
  */
-.section ".bss.page_aligned","wa"
+.section ".bss..page_aligned","wa"
 	.align PAGE_SIZE_asm
 #ifdef CONFIG_X86_PAE
 swapper_pg_pmd:
@@ -626,7 +626,7 @@ ENTRY(empty_zero_page)
  * This starts the data section.
  */
 #ifdef CONFIG_X86_PAE
-.section ".data.page_aligned","wa"
+.section ".data..page_aligned","wa"
 	/* Page-aligned for the benefit of paravirt? */
 	.align PAGE_SIZE_asm
 ENTRY(swapper_pg_dir)
arch/x86/kernel/head_64.S +2 -2
index 0e275d4..643d5d3 100644
@@ -40,7 +40,7 @@ L4_START_KERNEL = pgd_index(__START_KERNEL_map)
 L3_START_KERNEL = pud_index(__START_KERNEL_map)
 
 	.text
-	.section .text.head
+	.section .text..head
 	.code64
 	.globl startup_64
 startup_64:
@@ -414,7 +414,7 @@ ENTRY(phys_base)
 ENTRY(idt_table)
 	.skip 256 * 16
 
-	.section .bss.page_aligned, "aw", @nobits
+	.section .bss..page_aligned, "aw", @nobits
 	.align PAGE_SIZE
 ENTRY(empty_zero_page)
 	.skip PAGE_SIZE
arch/x86/kernel/init_task.c +2 -2
index df3bf26..103b1c5 100644
@@ -22,7 +22,7 @@ struct mm_struct init_mm = INIT_MM(init_mm);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
@@ -36,7 +36,7 @@ EXPORT_SYMBOL(init_task);
 /*
  * per-CPU TSS segments. Threads are completely 'soft' on Linux,
  * no more per-task TSS's. The TSS size is kept cacheline-aligned
- * so they are allowed to end up in the .data.cacheline_aligned
+ * so they are allowed to end up in the .data..cacheline_aligned
  * section. Since TSS's are completely CPU-local, we want them
  * on exact cacheline boundaries, to eliminate cacheline ping-pong.
  */
arch/x86/kernel/traps.c +1 -1
index 7932338..fc8ff15 100644
@@ -78,7 +78,7 @@ char ignore_fpu_irq;
  * for this.
  */
 gate_desc idt_table[256]
-	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
+	__attribute__((__section__(".data..idt"))) = { { { { 0, 0 } } }, };
 #endif
 
 DECLARE_BITMAP(used_vectors, NR_VECTORS);
arch/x86/kernel/vmlinux_32.lds.S +18 -18
index 82c6755..31c131a 100644
@@ -31,15 +31,15 @@ SECTIONS
   . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
   phys_startup_32 = startup_32 - LOAD_OFFSET;
 
-  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+  .text..head : AT(ADDR(.text..head) - LOAD_OFFSET) {
   	_text = .;			/* Text and read-only data */
-	*(.text.head)
+	*(.text..head)
   } :text = 0x9090
 
   /* read-only */
   .text : AT(ADDR(.text) - LOAD_OFFSET) {
 	. = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */
-	*(.text.page_aligned)
+	*(.text..page_aligned)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
@@ -71,32 +71,32 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
   	__nosave_begin = .;
-	*(.data.nosave)
+	*(.data..nosave)
   	. = ALIGN(PAGE_SIZE);
   	__nosave_end = .;
   }
 
   . = ALIGN(PAGE_SIZE);
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-	*(.data.page_aligned)
-	*(.data.idt)
+  .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
+	*(.data..page_aligned)
+	*(.data..idt)
   }
 
   . = ALIGN(32);
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-	*(.data.cacheline_aligned)
+  .data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
+	*(.data..cacheline_aligned)
   }
 
   /* rarely changed data like cpu maps */
   . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-	*(.data.read_mostly)
+  .data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
+	*(.data..read_mostly)
 	_edata = .;		/* End of data section */
   }
 
   . = ALIGN(THREAD_SIZE);	/* init_task */
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-	*(.data.init_task)
+  .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) {
+	*(.data..init_task)
   }
 
   /* might get freed after init */
@@ -179,11 +179,11 @@ SECTIONS
   }
 #endif
   . = ALIGN(PAGE_SIZE);
-  .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
+  .data..percpu  : AT(ADDR(.data..percpu) - LOAD_OFFSET) {
 	__per_cpu_start = .;
-	*(.data.percpu.page_aligned)
-	*(.data.percpu)
-	*(.data.percpu.shared_aligned)
+	*(.data..percpu.page_aligned)
+	*(.data..percpu)
+	*(.data..percpu.shared_aligned)
 	__per_cpu_end = .;
   }
   . = ALIGN(PAGE_SIZE);
@@ -192,7 +192,7 @@ SECTIONS
   .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
 	__init_end = .;
 	__bss_start = .;		/* BSS */
-	*(.bss.page_aligned)
+	*(.bss..page_aligned)
 	*(.bss)
 	. = ALIGN(4);
 	__bss_stop = .;
arch/x86/kernel/vmlinux_64.lds.S +13 -13
index 1a614c0..56ed592 100644
@@ -28,7 +28,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .text :  AT(ADDR(.text) - LOAD_OFFSET) {
 	/* First the code that has to be first for bootstrapping */
-	*(.text.head)
+	*(.text..head)
 	_stext = .;
 	/* Then the rest */
 	TEXT_TEXT
@@ -63,17 +63,17 @@ SECTIONS
 
   . = ALIGN(PAGE_SIZE);
   . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-	*(.data.cacheline_aligned)
+  .data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
+	*(.data..cacheline_aligned)
   }
   . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-  	*(.data.read_mostly)
+  .data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
+	*(.data..read_mostly)
   }
 
 #define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data..read_mostly) + SIZEOF(.data..read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data..read_mostly) + SIZEOF(.data..read_mostly) + 4095) & ~(4095))
 
 #define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
 #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
@@ -122,13 +122,13 @@ SECTIONS
 #undef VVIRT
 
   . = ALIGN(THREAD_SIZE);	/* init_task */
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-	*(.data.init_task)
+  .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) {
+	*(.data..init_task)
   }:data.init
 
   . = ALIGN(PAGE_SIZE);
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-	*(.data.page_aligned)
+  .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
+	*(.data..page_aligned)
   }
 
   /* might get freed after init */
@@ -215,13 +215,13 @@ SECTIONS
 
   . = ALIGN(PAGE_SIZE);
   __nosave_begin = .;
-  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
+  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data..nosave) }
   . = ALIGN(PAGE_SIZE);
   __nosave_end = .;
 
   __bss_start = .;		/* BSS */
   .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-	*(.bss.page_aligned)
+	*(.bss..page_aligned)
 	*(.bss)
 	}
   __bss_stop = .;
arch/xtensa/kernel/head.S +1 -1
index 67e6913..b515e04 100644
@@ -234,7 +234,7 @@ should_never_return:
  * BSS section
  */
 	
-.section ".bss.page_aligned", "w"
+.section ".bss..page_aligned", "w"
 ENTRY(swapper_pg_dir)
 	.fill	PAGE_SIZE, 1, 0
 ENTRY(empty_zero_page)
arch/xtensa/kernel/init_task.c +1 -1
index e07f5c9..d07db9b 100644
@@ -28,7 +28,7 @@ struct mm_struct init_mm = INIT_MM(init_mm);
 EXPORT_SYMBOL(init_mm);
 
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data..init_task"))) =
 { INIT_THREAD_INFO(init_task) };
 
 struct task_struct init_task = INIT_TASK(init_task);
arch/xtensa/kernel/vmlinux.lds.S +3 -3
index d506774..06aa28b 100644
@@ -121,14 +121,14 @@ SECTIONS
     DATA_DATA
     CONSTRUCTORS
     . = ALIGN(XCHAL_ICACHE_LINESIZE);
-    *(.data.cacheline_aligned)
+    *(.data..cacheline_aligned)
   }
 
   _edata = .;
 
   /* The initial task */
   . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
+  .data..init_task : { *(.data..init_task) }
 
   /* Initialization code and data: */
 
@@ -259,7 +259,7 @@ SECTIONS
 
   /* BSS section */
   _bss_start = .;
-  .bss : { *(.bss.page_aligned) *(.bss) }
+  .bss : { *(.bss..page_aligned) *(.bss) }
   _bss_end = .;
 
   _end = .;
include/asm-frv/init.h +4 -4
index 8b15838..4d21473 100644
@@ -1,12 +1,12 @@
 #ifndef _ASM_INIT_H
 #define _ASM_INIT_H
 
-#define __init __attribute__ ((__section__ (".text.init")))
-#define __initdata __attribute__ ((__section__ (".data.init")))
+#define __init __attribute__ ((__section__ (".text..init")))
+#define __initdata __attribute__ ((__section__ (".data..init")))
 /* For assembly routines */
-#define __INIT		.section	".text.init",#alloc,#execinstr
+#define __INIT		.section	".text..init",#alloc,#execinstr
 #define __FINIT		.previous
-#define __INITDATA	.section	".data.init",#alloc,#write
+#define __INITDATA	.section	".data..init",#alloc,#write
 
 #endif
 
include/asm-generic/vmlinux.lds.h +7 -7
index c61fab1..0485f0b 100644
@@ -64,7 +64,7 @@
 /* .data section */
 #define DATA_DATA							\
 	*(.data)							\
-	*(.data.init.refok)						\
+	*(.data..init.refok)						\
 	*(.ref.data)							\
 	DEV_KEEP(init.data)						\
 	DEV_KEEP(exit.data)						\
@@ -255,8 +255,8 @@
 		*(.text.hot)						\
 		*(.text)						\
 		*(.ref.text)						\
-		*(.text.init.refok)					\
-		*(.exit.text.refok)					\
+		*(.text..init.refok)					\
+		*(.text..exit.refok)					\
 	DEV_KEEP(init.text)						\
 	DEV_KEEP(exit.text)						\
 	CPU_KEEP(init.text)						\
@@ -433,9 +433,9 @@
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
 	VMLINUX_SYMBOL(__per_cpu_start) = .;				\
-	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {		\
-		*(.data.percpu.page_aligned)				\
-		*(.data.percpu)						\
-		*(.data.percpu.shared_aligned)				\
+	.data..percpu  : AT(ADDR(.data..percpu) - LOAD_OFFSET) {	\
+		*(.data..percpu.page_aligned)				\
+		*(.data..percpu)					\
+		*(.data..percpu.shared_aligned)				\
 	}								\
 	VMLINUX_SYMBOL(__per_cpu_end) = .;
include/linux/cache.h +1 -1
index 97e2488..4c57065 100644
@@ -31,7 +31,7 @@
 #ifndef __cacheline_aligned
 #define __cacheline_aligned					\
   __attribute__((__aligned__(SMP_CACHE_BYTES),			\
-		 __section__(".data.cacheline_aligned")))
+		 __section__(".data..cacheline_aligned")))
 #endif /* __cacheline_aligned */
 
 #ifndef __cacheline_aligned_in_smp
include/linux/init.h +4 -4
index 68cb026..f87423d 100644
@@ -62,9 +62,9 @@
 
 /* backward compatibility note
  *  A few places hardcode the old section names:
- *  .text.init.refok
- *  .data.init.refok
- *  .exit.text.refok
+ *  .text..init.refok
+ *  .data..init.refok
+ *  .text..exit.refok
  *  They should be converted to use the defines from this file
  */
 
@@ -301,7 +301,7 @@ void __init parse_early_param(void);
 #endif
 
 /* Data marked not to be saved by software suspend */
-#define __nosavedata __section(.data.nosave)
+#define __nosavedata __section(.data..nosave)
 
 /* This means "can be init if no module support, otherwise module load
    may call it." */
include/linux/linkage.h +2 -2
index fee9e59..bddaee6 100644
@@ -18,8 +18,8 @@
 # define asmregparm
 #endif
 
-#define __page_aligned_data	__section(.data.page_aligned) __aligned(PAGE_SIZE)
-#define __page_aligned_bss	__section(.bss.page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_data	__section(.data..page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_bss	__section(.bss..page_aligned) __aligned(PAGE_SIZE)
 
 /*
  * This is used by architectures to keep arguments on the stack
include/linux/percpu.h +5 -5
index 9f2a375..c89a214 100644
@@ -10,13 +10,13 @@
 
 #ifdef CONFIG_SMP
 #define DEFINE_PER_CPU(type, name)					\
-	__attribute__((__section__(".data.percpu")))			\
+	__attribute__((__section__(".data..percpu")))			\
 	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
 
 #ifdef MODULE
-#define SHARED_ALIGNED_SECTION ".data.percpu"
+#define SHARED_ALIGNED_SECTION ".data..percpu"
 #else
-#define SHARED_ALIGNED_SECTION ".data.percpu.shared_aligned"
+#define SHARED_ALIGNED_SECTION ".data..percpu.shared_aligned"
 #endif
 
 #define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
@@ -24,8 +24,8 @@
 	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name		\
 	____cacheline_aligned_in_smp
 
-#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)			\
-	__attribute__((__section__(".data.percpu.page_aligned")))	\
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
+	__attribute__((__section__(".data..percpu.page_aligned")))	\
 	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
 #else
 #define DEFINE_PER_CPU(type, name)					\
include/linux/spinlock.h +1 -1
index a0c66a2..710c825 100644
@@ -60,7 +60,7 @@
 /*
  * Must define these before including other files, inline functions need them
  */
-#define LOCK_SECTION_NAME ".text.lock."KBUILD_BASENAME
+#define LOCK_SECTION_NAME ".text..lock."KBUILD_BASENAME
 
 #define LOCK_SECTION_START(extra)               \
         ".subsection 1\n\t"                     \
kernel/module.c +1 -1
index fe723e0..77fbf38 100644
@@ -475,7 +475,7 @@ static unsigned int find_pcpusec(Elf_Ehdr *hdr,
 				 Elf_Shdr *sechdrs,
 				 const char *secstrings)
 {
-	return find_sec(hdr, sechdrs, secstrings, ".data.percpu");
+	return find_sec(hdr, sechdrs, secstrings, ".data..percpu");
 }
 
 static void percpu_modcopy(void *pcpudest, const void *from, unsigned long size)
scripts/mod/modpost.c +6 -6
index 8892161..a7e282e 100644
@@ -794,9 +794,9 @@ static const char *data_sections[] = { DATA_SECTIONS, NULL };
 /* sections that may refer to an init/exit section with no warning */
 static const char *initref_sections[] =
 {
-	".text.init.refok*",
-	".exit.text.refok*",
-	".data.init.refok*",
+	".text..init.refok*",
+	".text..exit.refok*",
+	".data..init.refok*",
 	NULL
 };
 
@@ -915,7 +915,7 @@ static int section_mismatch(const char *fromsec, const char *tosec)
  * Pattern 0:
  *   Do not warn if funtion/data are marked with __init_refok/__initdata_refok.
  *   The pattern is identified by:
- *   fromsec = .text.init.refok* | .data.init.refok*
+ *   fromsec = .text..init.refok* | .data..init.refok*
  *
  * Pattern 1:
  *   If a module parameter is declared __initdata and permissions=0
@@ -939,8 +939,8 @@ static int section_mismatch(const char *fromsec, const char *tosec)
  *           *probe_one, *_console, *_timer
  *
  * Pattern 3:
- *   Whitelist all refereces from .text.head to .init.data
- *   Whitelist all refereces from .text.head to .init.text
+ *   Whitelist all references from .text..head to .init.data
+ *   Whitelist all references from .text..head to .init.text
  *
  * Pattern 4:
  *   Some symbols belong to init section but still it is ok to reference
scripts/recordmcount.pl +3 -3
index fe83141..da33ef9 100755
@@ -26,7 +26,7 @@
 # which will also be the location of that section after final link.
 # e.g.
 #
-#  .section ".text.sched"
+#  .section ".text..sched"
 #  .globl my_func
 #  my_func:
 #        [...]
@@ -39,7 +39,7 @@
 #        [...]
 #
 # Both relocation offsets for the mcounts in the above example will be
-# offset from .text.sched. If we make another file called tmp.s with:
+# offset from .text..sched. If we make another file called tmp.s with:
 #
 #  .section __mcount_loc
 #  .quad  my_func + 0x5
@@ -51,7 +51,7 @@
 # But this gets hard if my_func is not globl (a static function).
 # In such a case we have:
 #
-#  .section ".text.sched"
+#  .section ".text..sched"
 #  my_func:
 #        [...]
 #        call mcount  (offset: 0x5)
Signature · 1 line
1.6.1.3
author
#2 lore raw

PATCH v2 2/4 x86: Add an option to compile with -ffunction-sections -fdata-sections

From: Waseem Daher <[email protected]>

This patch makes it possible to link and boot an x86 kernel with -ffunction-sections and -fdata-sections enabled.

Modpost currently warns whenever it sees a section with a name matching [.][0-9]+$ because they are often caused by section flag mismatch errors. When compiling with -ffunction-sections -fdata-sections, gcc places various classes of local symbols in sections with names such as .rodata.__func__.12345, causing these warnings to be printed spuriously. The simplest fix is to disable the warning when CONFIG_FUNCTION_DATA_SECTIONS is enabled.

[[email protected]: modpost support]
[[email protected]: depend on x86, update CONFIG_FUNCTION_TRACER conflict]
---
 Makefile                          |    4 ++++
 arch/x86/Kconfig                  |    1 +
 arch/x86/kernel/vmlinux_32.lds.S  |    1 +
 arch/x86/kernel/vmlinux_64.lds.S  |    1 +
 include/asm-generic/vmlinux.lds.h |    5 ++++-
 lib/Kconfig.debug                 |   18 ++++++++++++++++++
 scripts/Makefile.modpost          |    1 +
 scripts/mod/modpost.c             |   10 ++++++++--
 8 files changed, 38 insertions(+), 3 deletions(-)
Makefile +4 -0
index 22d7584..b95cf67 100644
@@ -550,6 +550,10 @@ ifdef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -pg
 endif
 
+ifdef CONFIG_FUNCTION_DATA_SECTIONS
+KBUILD_CFLAGS	+= -ffunction-sections -fdata-sections
+endif
+
 # We trigger additional mismatches with less inlining
 ifdef CONFIG_DEBUG_SECTION_MISMATCH
 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
arch/x86/Kconfig +1 -0
index 9c39095..d3a991c 100644
@@ -28,6 +28,7 @@ config X86
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
+	select HAVE_FUNCTION_DATA_SECTIONS
 	select HAVE_KRETPROBES
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
arch/x86/kernel/vmlinux_32.lds.S +1 -0
index 31c131a..fbc5c3f 100644
@@ -194,6 +194,7 @@ SECTIONS
 	__bss_start = .;		/* BSS */
 	*(.bss..page_aligned)
 	*(.bss)
+	*(.bss.[A-Za-z$_]*)		/* handle -fdata-sections */
 	. = ALIGN(4);
 	__bss_stop = .;
   	_end = . ;
arch/x86/kernel/vmlinux_64.lds.S +1 -0
index 56ed592..6e03cb2 100644
@@ -223,6 +223,7 @@ SECTIONS
   .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
 	*(.bss..page_aligned)
 	*(.bss)
+	*(.bss.[A-Za-z$_]*)	/* handle -fdata-sections */
 	}
   __bss_stop = .;
 
include/asm-generic/vmlinux.lds.h +4 -1
index 0485f0b..2b31598 100644
@@ -64,6 +64,7 @@
 /* .data section */
 #define DATA_DATA							\
 	*(.data)							\
+	*(.data.[A-Za-z$_]*)	/* handle -fdata-sections */		\
 	*(.data..init.refok)						\
 	*(.ref.data)							\
 	DEV_KEEP(init.data)						\
@@ -87,7 +88,8 @@
 	. = ALIGN((align));						\
 	.rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {		\
 		VMLINUX_SYMBOL(__start_rodata) = .;			\
-		*(.rodata) *(.rodata.*)					\
+		*(.rodata)						\
+		*(.rodata.[A-Za-z$_]*)	/* handle -fdata-sections */	\
 		*(__vermagic)		/* Kernel version magic */	\
 		*(__markers_strings)	/* Markers: strings */		\
 		*(__tracepoints_strings)/* Tracepoints: strings */	\
@@ -254,6 +256,7 @@
 		ALIGN_FUNCTION();					\
 		*(.text.hot)						\
 		*(.text)						\
+		*(.text.[A-Za-z$_]*)	/* handle -ffunction-sections */\
 		*(.ref.text)						\
 		*(.text..init.refok)					\
 		*(.text..exit.refok)					\
lib/Kconfig.debug +18 -0
index 29044f5..3412706 100644
@@ -591,6 +591,24 @@ config FRAME_POINTER
 	  larger and slower, but it gives very useful debugging information
 	  in case of kernel bugs. (precise oopses/stacktraces/warnings)
 
+config HAVE_FUNCTION_DATA_SECTIONS
+	bool
+
+config FUNCTION_DATA_SECTIONS
+	bool "Compile with -ffunction-sections -fdata-sections"
+	depends on HAVE_FUNCTION_DATA_SECTIONS
+	depends on !FUNCTION_TRACER
+	help
+	  If you say Y here the compiler will give each function
+	  and data structure its own ELF section.
+
+	  This option conflicts with CONFIG_FUNCTION_TRACER, which
+	  enables profiling code generation, because current GCC does
+	  not support compiling with -ffunction-sections -pg (see
+	  <http://gcc.gnu.org/ml/gcc-help/2008-11/msg00128.html>).
+
+	  If unsure, say N.
+
 config BOOT_PRINTK_DELAY
 	bool "Delay each boot printk message by N milliseconds"
 	depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY
scripts/Makefile.modpost +1 -0
index f4053dc..a712bb2 100644
@@ -87,6 +87,7 @@ modpost = scripts/mod/modpost                    \
  $(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S)      \
  $(if $(CONFIG_MARKERS),-K $(kernelmarkersfile)) \
  $(if $(CONFIG_MARKERS),-M $(markersfile))	 \
+ $(if $(filter -ffunction-sections -fdata-sections,$(KBUILD_CFLAGS) $(CFLAGS_KERNEL)),-F) \
  $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w) \
  $(if $(cross_build),-c)
 
scripts/mod/modpost.c +8 -2
index a7e282e..8a99299 100644
@@ -32,6 +32,8 @@ static int warn_unresolved = 0;
 /* How a symbol is exported */
 static int sec_mismatch_count = 0;
 static int sec_mismatch_verbose = 1;
+/* Are we using -ffunction-sections or -fdata-sections? */
+static int function_data_sections = 0;
 
 enum export {
 	export_plain,      export_unused,     export_gpl,
@@ -736,7 +738,8 @@ static int check_section(const char *modname, const char *sec)
 		/* consume all digits */
 		while (*e && e != sec && isdigit(*e))
 			e--;
-		if (*e == '.' && !strstr(sec, ".linkonce")) {
+		if (*e == '.' && !strstr(sec, ".linkonce") &&
+		    !function_data_sections) {
 			warn("%s (%s): unexpected section name.\n"
 			     "The (.[number]+) following section name are "
 			     "ld generated and not expected.\n"
@@ -2063,7 +2066,7 @@ int main(int argc, char **argv)
 	struct ext_sym_list *extsym_iter;
 	struct ext_sym_list *extsym_start = NULL;
 
-	while ((opt = getopt(argc, argv, "i:I:e:cmsSo:awM:K:")) != -1) {
+	while ((opt = getopt(argc, argv, "i:I:e:cFmsSo:awM:K:")) != -1) {
 		switch (opt) {
 		case 'i':
 			kernel_read = optarg;
@@ -2083,6 +2086,9 @@ int main(int argc, char **argv)
 			extsym_iter->file = optarg;
 			extsym_start = extsym_iter;
 			break;
+		case 'F':
+			function_data_sections = 1;
+			break;
 		case 'm':
 			modversions = 1;
 			break;
Signature · 1 line
1.6.1.3
author
#3 lore raw

PATCH v2 3/4 Ksplice: Export symbols needed for Ksplice

Ksplice uses __module_address and __module_text_address to determine which module contains various addresses.

Ksplice uses __kernel_text_address to limit its check for trampolines (jump instructions inserted by Ksplice) to only text addresses.

Ksplice uses task_curr in order to confirm that no other tasks are executing during Ksplice's kernel stack check.

Ksplice uses find_bug and search_exception_tables as part of its conservative check that the user provided the correct source code for the running kernel.

---
 kernel/extable.c |    3 +++
 kernel/module.c  |    2 ++
 kernel/sched.c   |    1 +
 lib/bug.c        |    1 +
 4 files changed, 7 insertions(+), 0 deletions(-)
kernel/extable.c +3 -0
index 384f0da..ce08fe8 100644
@@ -40,6 +40,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr)
 		e = search_module_extables(addr);
 	return e;
 }
+EXPORT_SYMBOL_GPL(search_exception_tables);
 
 __notrace_funcgraph int core_kernel_text(unsigned long addr)
 {
@@ -60,6 +61,7 @@ __notrace_funcgraph int __kernel_text_address(unsigned long addr)
 		return 1;
 	return is_module_text_address(addr);
 }
+EXPORT_SYMBOL_GPL(__kernel_text_address);
 
 int kernel_text_address(unsigned long addr)
 {
@@ -83,3 +85,4 @@ int func_ptr_is_kernel_text(void *ptr)
 		return 1;
 	return is_module_text_address(addr);
 }
+EXPORT_SYMBOL_GPL(kernel_text_address);
kernel/module.c +2 -0
index 77fbf38..b3135db 100644
@@ -2760,6 +2760,7 @@ __notrace_funcgraph struct module *__module_address(unsigned long addr)
 			return mod;
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(__module_address);
 
 /*
  * is_module_text_address - is this address inside module code?
@@ -2798,6 +2799,7 @@ struct module *__module_text_address(unsigned long addr)
 	}
 	return mod;
 }
+EXPORT_SYMBOL_GPL(__module_text_address);
 
 /* Don't grab lock, we're oopsing. */
 void print_modules(void)
kernel/sched.c +1 -0
index c1d0ed3..a35f940 100644
@@ -1801,6 +1801,7 @@ inline int task_curr(const struct task_struct *p)
 {
 	return cpu_curr(task_cpu(p)) == p;
 }
+EXPORT_SYMBOL_GPL(task_curr);
 
 static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)
 {
lib/bug.c +1 -0
index 300e41a..c8491f9 100644
@@ -124,6 +124,7 @@ const struct bug_entry *find_bug(unsigned long bugaddr)
 
 	return module_find_bug(bugaddr);
 }
+EXPORT_SYMBOL_GPL(find_bug);
 
 enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs)
 {
Signature · 1 line
1.6.1.3
author
#4 lore raw

PATCH v2 4/4 Ksplice: Support updating x86-32 and x86-64

From: Jeff Arnold <[email protected]>

Ksplice makes it possible to apply patches to the kernel without rebooting.

---
 Documentation/ksplice.txt      |  304 ++++
 MAINTAINERS                    |   10 +
 arch/Kconfig                   |   14 +
 arch/x86/Kconfig               |    1 +
 arch/x86/kernel/ksplice-arch.c |   96 ++
 include/linux/kernel.h         |    1 +
 include/linux/ksplice.h        |  224 +++
 kernel/Makefile                |    3 +
 kernel/ksplice.c               | 2995 ++++++++++++++++++++++++++++++++++++++++
 kernel/panic.c                 |    1 +
 10 files changed, 3649 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/ksplice.txt
 create mode 100644 arch/x86/kernel/ksplice-arch.c
 create mode 100644 include/linux/ksplice.h
 create mode 100644 kernel/ksplice.c
Documentation/ksplice.txt new file +304 -0
new file mode 100644
index 0000000..648d015
@@ -0,0 +1,304 @@
+Ksplice
+-------
+
+CONTENTS:
+
+1. Concepts: updates, module changes, target modules
+2. What changes can Ksplice handle?
+3. Dependency model
+4. Locking model
+5. altinstructions, smplocks, and parainstructions
+6. sysfs interface
+7. debugfs interface
+8. Hooks for running custom code during the update process
+
+0. Design Description
+---------------------
+
+For a description of the Ksplice design, please see the Ksplice
+technical overview document: <http://www.ksplice.com/doc/ksplice.pdf>.
+For usage examples and the Ksplice man pages, please see
+<http://www.ksplice.com>.
+
+The document below assumes familiarity with the Ksplice design and
+describes notable implementation details and the interface between the
+Ksplice kernel component and the Ksplice user space component.
+
+1. Concepts: updates, module changes, target modules
+----------------------------------------------------
+
+A Ksplice update (struct update) contains one or more Ksplice module
+changes (struct ksplice_mod_change), one for each target kernel module
+that should be changed by the update.  ksplice_mod_changes are grouped
+together into a Ksplice update in order to allow multiple modules to
+be changed atomically.
+
+The contents of a Ksplice module change are documented via kernel-doc
+in include/linux/ksplice.h.  To construct a new Ksplice update to be
+performed atomically, one needs to:
+  1. Populate the fields of one or more ksplice_mod_change structures.
+  2. Call the Ksplice function init_ksplice_mod_change() on each
+     ksplice_mod_change to register them with the Ksplice kernel
+     component.  When init_ksplice_mod_change() is called on a
+     ksplice_mod_change, that ksplice_mod_change will be associated
+     with the other ksplice_mod_changes that share the same Ksplice
+     identifier (KID) field.
+  3. After all of the mod_changes intended for a particular Ksplice
+     update have been loaded, that update can be applied via the sysfs
+     interface (described in Section 7 below).
+
+Each ksplice_mod_change has a two modules associated with it: an
+old_code module and a new_code module.
+
+A ksplice_mod_change's "old_code" module contains materials needed
+only for preparing the update.  Specifically, the old_code module
+contains a copy of the pre-patch version of each of the compilation
+units changed by the ksplice_mod_change.  The old_code module can be
+unloaded after the update has been applied in order to save memory.
+
+The ksplice_mod_change's "new_code" module contains the new sections
+to be inserted by the update; it needs to remain loaded for as long as
+the update is applied.
+
+Here's an example:
+
+Let's say that the Ksplice user space component wants to update the
+core kernel and the isdn module.  The user space component will select
+a KID for this update (let's say 123abc) and generate four modules:
+
+ksplice_123abc_vmlinux_new (the new_code module for the vmlinux module change)
+ksplice_123abc_vmlinux_old (the old_code module for the vmlinux module change)
+ksplice_123abc_isdn_new (the new_code module for the isdn module change)
+ksplice_123abc_isdn_old (the old_code module for the isdn module change)
+
+Once both of the vmlinux modules have been loaded, one of the modules
+calls init_ksplice_mod_change on a ksplice_mod_change corresponding to
+the desired vmlinux changes.
+
+Similarly, once both of the isdn modules have been loaded, one of the
+modules calls init_ksplice_mod_change on a ksplice_mod_change
+corresponding to the desired isdn changes.
+
+Once all modules are loaded (in this example, four modules), the
+update can be applied atomically using the Ksplice sysfs interface.
+
+2. What changes can Ksplice handle?
+-----------------------------------
+
+The Ksplice user space component takes a source code patch and uses it
+to construct appropriate ksplice_mod_changes for an update.  Ksplice
+can handle source code patches that add new functions, modify the text
+or arguments of existing functions, delete functions, move functions
+between compilation units, change functions from local to global (or
+vice versa), add exported symbols, rename exported symbols, and delete
+exported symbols.  Ksplice can handle patches that modify either C
+code or assembly code.
+
+As described in the Ksplice technical overview document, a programmer
+needs to write some new code in order for Ksplice to apply a patch
+that makes semantic changes to kernel data structures.  Some other
+limitations also apply:
+
+Ksplice does not support changes to __init functions that been
+unloaded from kernel memory.  Ksplice also does not support changes to
+functions in .exit.text sections since Ksplice currently requires that
+all Ksplice updates affecting a module be reversed before that module
+can be unloaded.
+
+The Ksplice user space implementation does not currently support
+changes to weak symbols and changes to global read-only data
+structures (changes to read-only data structures that are local to a
+compilation unit are fine).
+
+Exported symbols:
+
+Ksplice can handle arbitrary changes to exported symbols in the source
+code patch.
+
+Ksplice deletes exported symbols by looking up the relevant struct
+kernel_symbol in the kernel's exported symbol table and replacing the
+name field with a pointer to a string that begins with DISABLED.
+
+Ksplice adds new exported symbols through the same mechanism; the
+relevant new_code module will have a ksymtab entry containing a symbol
+with a name beginning with DISABLED, and Ksplice will replace that
+with the name of the symbol to be exported when the update is
+atomically applied.
+
+Because the struct kernel_symbol for a newly exported symbol is
+contained in the Ksplice new_Code module, if a module using one of the
+newly exported symbols is loaded, that module will correctly depend on
+the Ksplice new_code module that exported the symbol.
+
+3. Dependency model
+-------------------
+
+Because Ksplice resolves symbols used in the post code using Ksplice
+relocations, Ksplice must enforce additional dependencies.  Ksplice
+uses the use_module function to directly add dependencies on all the
+modules that the post code references.
+
+4. Locking model
+----------------
+
+From a locking perspective, Ksplice treats applying or removing a
+Ksplice update as analogous to loading or unloading a new version of
+the kernel modules patched by the update.  Ksplice uses module_mutex
+to protect against a variety of race conditions related to modules
+being loaded or unloaded while Ksplice is applying or reversing an
+update; this approach also protects against race conditions involving
+multiple Ksplice updates being loaded or unloaded simultaneously as
+well.
+
+5. altinstructions, smplocks, and parainstructions
+--------------------------------------------------
+
+There are currently several mechanisms through which the Linux kernel
+will modify executable code at runtime.
+
+These mechanisms sometimes overwrite the storage unit of a relocation,
+which would cause problems if not handled properly by Ksplice.
+
+Ksplice solves this problem by writing "canary" bytes (e.g.,
+0x77777777) in the storage unit of the relocation in user space.
+Ksplice then checks whether the canary has been overwritten before
+using a Ksplice relocation to detect symbol values or to write a value
+to the storage unit of a Ksplice relocation.
+
+6. sysfs interface
+------------------
+
+Ksplice exports four sysfs files per Ksplice update in order to
+communicate with user space.  For each update, these four files are
+located in a directory of the form /sys/kernel/ksplice/$kid, with $kid
+replaced by the KID of the Ksplice update.
+
+A.  /sys/kernel/ksplice/$kid/stage (mode 0600)
+
+This file contains one of three strings:
+preparing: Indicates that this update has not yet been applied
+applied:   Indicates that this update has been applied and has not been reversed
+reversed:  Indicates that this update has been reversed
+
+When the stage is "preparing", the superuser can write "applied" to
+the stage file in order to instruct Ksplice to apply the update.  When
+the stage is "applied", the superuser can write "reversed" to the
+stage file in order to instruct Ksplice to reverse the update.
+Afterwards, the superuser can write "cleanup" to the stage file in
+order to instruct Ksplice to clean up the debugging information and
+sysfs directory associated with the reversed update.  Once an update
+is reversed, it cannot be re-applied without first cleaning up the
+update.
+
+B.  /sys/kernel/ksplice/$kid/debug (mode 0600)
+
+The file contains a single number: 1 if debugging is enabled for this
+Ksplice update and 0 otherwise.
+
+The superuser can write a new value to this file to enable or disable
+debugging.
+
+C.  /sys/kernel/ksplice/$kid/partial (mode 0600)
+
+The file contains a single number: 1 if the update should be applied
+even if some of the target modules are not loaded and 0 otherwise.
+
+D.  /sys/kernel/ksplice/$kid/abort_cause (mode 0400)
+
+This file contains a value indicating either 1) that Ksplice
+successfully completed the most recently requested stage transition or
+2) why Ksplice aborted the most recently requested stage transition.
+
+Each abort_code string is described below, along with the stage
+transitions that might potentially trigger each possible abort code.
+The stage transitions are abbreviated as follows: preparing->applied
+(P->A), applied->reversed (A->R).
+
+ok (P->A, A->R): The most recent stage transition succeeded.
+
+no_match (P->A): Ksplice aborted the update because Ksplice was unable
+to match the old_code module's object code against the running
+kernel's object code.
+
+failed_to_find (P->A): Ksplice aborted the update because Ksplice was
+unable to resolve some of the symbols used in the update.
+
+missing_export (P->A): Ksplice aborted the update because the symbols
+exported by the kernel did not match Ksplice's expectations.
+
+already_reversed (P->A): Ksplice aborted the update because once an
+update has been reversed, it cannot be applied again (without first
+being cleaned up and reinitialized).
+
+module_busy (A->R): Ksplice aborted the undo operation because the
+target Ksplice update is in use by another kernel module;
+specifically, either the target Ksplice update exports a symbol that
+is in use by another module or another Ksplice update depends on this
+Ksplice update.
+
+out_of_memory (P->A, A->R): Ksplice aborted the operation because a call to
+kmalloc or vmalloc failed.
+
+code_busy (P->A, A->R): Ksplice aborted the operation because Ksplice
+was unable to find a moment when one or more of the to-be-patched
+functions was not a thread's kernel stack.
+
+target_not_loaded (P->A): Ksplice aborted the update because one of
+the target modules is not loaded and the partial option
+(/sys/kernel/ksplice/$kid/partial) is not enabled.
+
+call_failed (P->A, A->R): One of the calls included as part of this
+update returned nonzero exit status.
+
+unexpected_running_task (P->A, A->R): Ksplice aborted the operation
+because Ksplice observed a running task during the kernel stack check,
+at a time when Ksplice expected all tasks to be stopped by
+stop_machine.
+
+unexpected (P->A, A->R): Ksplice aborted the operation because it
+encountered an unspecified internal error.  This condition can only be
+caused by an invalid input to Ksplice or a bug in Ksplice.
+
+E.  /sys/kernel/ksplice/$kid/conflicts (mode 0400)
+
+This file is empty until Ksplice aborts an operation because of a
+code_busy condition (see "abort_code" above).  This conflicts file
+then contains information about the process(es) that caused the stack
+check failure.
+
+Specifically, each line of this file consists of three space-separated
+values, describing a single conflict:
+
+$program_name $program_pid $conflict_label
+
+$program_name is the name of the program with the conflict.
+$program_pid is the pid of the program with the conflict.
+$conflict_label is the Ksplice label of the function with the conflict.
+
+7. debugfs interface
+--------------------
+
+Ksplice exports a single file to debugfs for each Ksplice update.  The
+file has a name of the form ksplice_KID, where KID is the unique
+identifier of the Ksplice update.  It contains debugging information
+in a human-readable format.
+
+8. Hooks for running custom code during the update process
+----------------------------------------------------------
+
+Ksplice allows a programmer to write custom code to be called from
+within the kernel during the update process.  The kernel component
+allows custom code to be executed at the following times:
+
+- pre_apply: Called before the update has been applied and before the
+machine has been stopped.  Allowed to fail.
+- check_apply: Called before the update has been applied but after the
+machine has been stopped.  Allowed to fail.
+- apply: Called when the update is definitely going to be applied and
+when the machine is stopped.  Not allowed to fail.
+- post_apply: Called when the update has been applied and the machine
+is no longer stopped.  Not allowed to fail.
+- fail_apply: Called when the update failed to apply and the machine
+is no longer stopped.  Not allowed to fail.
+
+Ksplice also provides analagous xxx_reverse hooks.
MAINTAINERS +10 -0
index db65b4e..6b52212 100644
@@ -2636,6 +2636,16 @@ W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
 
+KSPLICE
+P:	Jeff Arnold
+M:	[email protected]
+P:	Anders Kaseorg
+M:	[email protected]
+P:	Tim Abbott
+M:	[email protected]
+W:	http://www.ksplice.com
+S:	Supported
+
 LAPB module
 L:	[email protected]
 S:	Orphan
arch/Kconfig +14 -0
index 550dab2..d84326b 100644
@@ -43,6 +43,17 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config KSPLICE
+	tristate "Ksplice rebootless kernel updates"
+	depends on KALLSYMS_ALL && MODULE_UNLOAD && SYSFS && \
+		   FUNCTION_DATA_SECTIONS
+	depends on HAVE_KSPLICE
+	help
+          Say Y here if you want to be able to apply certain kinds of
+          patches to your running kernel, without rebooting.
+
+          If unsure, say N.
+
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
 	help
@@ -75,6 +86,9 @@ config HAVE_IOREMAP_PROT
 config HAVE_KPROBES
 	bool
 
+config HAVE_KSPLICE
+	def_bool n
+
 config HAVE_KRETPROBES
 	bool
 
arch/x86/Kconfig +1 -0
index d3a991c..bc3e68a 100644
@@ -26,6 +26,7 @@ config X86
 	select HAVE_OPROFILE
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
+	select HAVE_KSPLICE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_FUNCTION_DATA_SECTIONS
arch/x86/kernel/ksplice-arch.c new file +96 -0

96 lines not on this page · raw message

include/linux/kernel.h +1 -0
index 7fa3718..95990e1 100644
@@ -307,6 +307,7 @@ extern enum system_states {
 #define TAINT_OVERRIDDEN_ACPI_TABLE	8
 #define TAINT_WARN			9
 #define TAINT_CRAP			10
+#define TAINT_KSPLICE			11
 
 extern void dump_stack(void) __cold;
 
include/linux/ksplice.h new file +224 -0

224 lines not on this page · raw message

kernel/Makefile +3 -0
index 170a921..1a95df9 100644
@@ -12,6 +12,8 @@ obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
 	    notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \
 	    async.o
 
+CFLAGS_ksplice.o += -Iarch/$(SRCARCH)/kernel
+
 ifdef CONFIG_FUNCTION_TRACER
 # Do not trace debug files and internal ftrace files
 CFLAGS_REMOVE_lockdep.o = -pg
@@ -71,6 +73,7 @@ obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
 obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
 obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
 obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_KSPLICE) += ksplice.o
 obj-$(CONFIG_KGDB) += kgdb.o
 obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
 obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
kernel/ksplice.c new file +2995 -0

2,305 lines not on this page · raw message

kernel/panic.c +1 -0
index 2a2ff36..90faf4a 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.6.1.3

Part of the diff is not shown here. View the raw message.

#5 lore raw

Re: [PATCH v2 2/4] x86: Add an option to compile with -ffunction-sections -fdata-sections

In reply to Tim Abbott
Quoted 5 lines · Tim Abbott

From: Waseem Daher <[email protected]>

This patch makes it possible to link and boot an x86 kernel with -ffunction-sections and -fdata-sections enabled.

Quoted 8 lines

Modpost currently warns whenever it sees a section with a name matching [.][0-9]+$ because they are often caused by section flag mismatch errors. When compiling with -ffunction-sections -fdata-sections, gcc places various classes of local symbols in sections with names such as .rodata.__func__.12345, causing these warnings to be printed spuriously. The simplest fix is to disable the warning when CONFIG_FUNCTION_DATA_SECTIONS is enabled.

This is a pretty critical set of warnings, that often represent real bugs. I don't think it's acceptable to lose them. However, you already have (prior in the sequence) changed those section names to not conflict with the automatically generated ones, so it seems to me that this should be fixable without too much pain.

-hpa

Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.
#6 lore raw

PATCH 1/1 modpost: Check the section flags, not name, to catch missing "ax"/"aw"

Quoted 5 lines · H. Peter Anvin

This is a pretty critical set of warnings, that often represent real bugs. I don't think it's acceptable to lose them. However, you already have (prior in the sequence) changed those section names to not conflict with the automatically generated ones, so it seems to me that this should be fixable without too much pain.

Actually, the problem arises from a conflict between two classes of automatically generated section names, one from ld, and one from gcc. Instead of basing the warning on section names (the existing heuristic also fails to warn on some cases where it should, as it turns out), what do you think about this patch? I've tested that it still triggers the warning when an "ax" or "aw" is incorrectly removed, and it should handle even more cases than before.

Anders

[PATCH] modpost: Check the section flags, not name, to catch missing "ax"/"aw"

When you put
.section ".foo"
in an assembly file instead of
.section "foo", "ax"
, one of the possible symptoms is that modpost will see an ld-generated section name ".foo.1" in section_rel() or section_rela(). But this heuristic has two problems: it will miss a bad section that has no relocations, and it will incorrectly flag many gcc-generated sections as bad when compiling with -ffunction-sections -fdata-sections.

So instead of checking whether the section name matches a particular pattern, we directly check for a missing SHF_ALLOC in the section flags.

---
 scripts/mod/modpost.c |   49 ++++++++++++++++++-------------------------------
 1 files changed, 18 insertions(+), 31 deletions(-)
scripts/mod/modpost.c +19 -32
index 8892161..bb794fa 100644
@@ -713,41 +713,27 @@ int match(const char *sym, const char * const pat[])
 
 /* sections that we do not want to do full section mismatch check on */
 static const char *section_white_list[] =
-	{ ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+	{ ".comment", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
 
 /*
- * Is this section one we do not want to check?
- * This is often debug sections.
- * If we are going to check this section then
- * test if section name ends with a dot and a number.
- * This is used to find sections where the linker have
- * appended a dot-number to make the name unique.
+ * This is used to find sections missing the SHF_ALLOC flag.
  * The cause of this is often a section specified in assembler
- * without "ax" / "aw" and the same section used in .c
- * code where gcc add these.
+ * without "ax" / "aw".
  */
-static int check_section(const char *modname, const char *sec)
-{
-	const char *e = sec + strlen(sec) - 1;
-	if (match(sec, section_white_list))
-		return 1;
-
-	if (*e && isdigit(*e)) {
-		/* consume all digits */
-		while (*e && e != sec && isdigit(*e))
-			e--;
-		if (*e == '.' && !strstr(sec, ".linkonce")) {
-			warn("%s (%s): unexpected section name.\n"
-			     "The (.[number]+) following section name are "
-			     "ld generated and not expected.\n"
-			     "Did you forget to use \"ax\"/\"aw\" "
-			     "in a .S file?\n"
-			     "Note that for example <linux/init.h> contains\n"
-			     "section definitions for use in .S files.\n\n",
-			     modname, sec);
-		}
+static void check_section(const char *modname, struct elf_info *elf,
+                          Elf_Shdr *sechdr)
+{
+	const char *sec = sech_name(elf, sechdr);
+
+	if (sechdr->sh_type == SHT_PROGBITS &&
+	    !(sechdr->sh_flags & SHF_ALLOC) &&
+	    !match(sec, section_white_list)) {
+		warn("%s (%s): unexpected non-allocatable section.\n"
+		     "Did you forget to use \"ax\"/\"aw\" in a .S file?\n"
+		     "Note that for example <linux/init.h> contains\n"
+		     "section definitions for use in .S files.\n\n",
+		     modname, sec);
 	}
-	return 0;
 }
 
 
@@ -1374,7 +1360,7 @@ static void section_rela(const char *modname, struct elf_info *elf,
 	fromsec = sech_name(elf, sechdr);
 	fromsec += strlen(".rela");
 	/* if from section (name) is know good then skip it */
-	if (check_section(modname, fromsec))
+	if (match(fromsec, section_white_list))
 		return;
 
 	for (rela = start; rela < stop; rela++) {
@@ -1418,7 +1404,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
 	fromsec = sech_name(elf, sechdr);
 	fromsec += strlen(".rel");
 	/* if from section (name) is know good then skip it */
-	if (check_section(modname, fromsec))
+	if (match(fromsec, section_white_list))
 		return;
 
 	for (rel = start; rel < stop; rel++) {
@@ -1481,6 +1467,7 @@ static void check_sec_ref(struct module *mod, const char *modname,
 
 	/* Walk through all sections */
 	for (i = 0; i < elf->hdr->e_shnum; i++) {
+		check_section(modname, elf, &elf->sechdrs[i]);
 		/* We want to process only relocation sections and not .init */
 		if (sechdrs[i].sh_type == SHT_RELA)
 			section_rela(modname, elf, &elf->sechdrs[i]);
Signature · 1 line
1.6.1.3
#7 lore raw

Re: [PATCH] modpost: Check the section flags, not name, to catch missing "ax"/"aw"

Quoted 7 lines · Anders Kaseorg
Quoted 5 lines · H. Peter Anvin

This is a pretty critical set of warnings, that often represent real bugs. I don't think it's acceptable to lose them. However, you already have (prior in the sequence) changed those section names to not conflict with the automatically generated ones, so it seems to me that this should be fixable without too much pain.

Quoted 8 lines

Actually, the problem arises from a conflict between two classes of automatically generated section names, one from ld, and one from gcc. Instead of basing the warning on section names (the existing heuristic also fails to warn on some cases where it should, as it turns out), what do you think about this patch? I've tested that it still triggers the warning when an "ax" or "aw" is incorrectly removed, and it should handle even more cases than before.

Seems reasonable to me.

-hpa

Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.