Ksplice: Rebootless kernel updates
Subsystems (22)
v2 cover Ksplice: Rebootless kernel updates
This is an updated version of the Ksplice patch series. It applies to Linux 2.6.29-rc5 with Rusty Russell's patch series for the module subsystem from February 7 [0].
[0] http://lkml.org/lkml/2009/2/7/53
This patch series differs from the previous version in a few notable ways:
(1) The Ksplice changes to the module loader have been removed from this patch series because versions of them are already in Rusty Russell's tree.
(2) Some of the data structures were renamed in response to suggestions from Rusty Russell on the previous version of the patch series
(3) The patch changing the kernel's magic section names to support -ffunction-sections fdata-sections patch was rewritten in a cleaner way. I believe this new version of the patch eliminates the primary downside associated with previous iterations of the patch (in particular, the need to specify section flags for many sections).
A detailed changelog is available below.
==
These patches add support for Ksplice [1], a rebootless update system, to the kernel.
[1] http://www.ksplice.com/download
Jeff Arnold first mentioned Ksplice to the LKML last April [2], and submitted patches to the LKML last September [3], November [4], and December [5]. The basic idea is that Ksplice can apply an update to a running Linux kernel based only on a source code patch and the original kernel source. The Ksplice technical overview document [6] describes the design of Ksplice and some of the ways that Ksplice has been evaluated.
[2] http://lkml.org/lkml/2008/4/23/330
[3] http://lkml.org/lkml/2008/9/13/6
[4] http://lkml.org/lkml/2008/11/21/484
[5] http://lkml.org/lkml/2008/12/5/330
[6] http://www.ksplice.com/doc/ksplice.pdf
Specifically, Ksplice has been used to correct every significant Linux kernel CVE from May 2005 to May 2008 [7]. 88% of these CVEs can be fixed without writing any new code at all; the remaining 12% of CVEs require a minimal amount of new code (on average, roughly 20 new semicolon-terminated lines per CVE).
[7] http://www.ksplice.com/cve-evaluation
The interface between the Ksplice kernel component and the userspace utilities is documented in the last patch of this series. The current implementation of the userspace utilities is available from the Ksplice website and the Ksplice git repository [8]. The Ksplice userspace utilities transparently support both "integrated" operation (updating a kernel patched with this patch series) and "standalone" operation (updating a completely unmodified kernel).
[8] http://www.ksplice.com/git/ksplice.git
We think that merging Ksplice makes sense at this point because (1) development on the Ksplice kernel code has stabilized and (2) the system is useful as it currently stands.
-Tim Abbott
Changes between v1 and v2:
- rewrote the -ffunction-sections -fdata-sections patches in a cleaner way
- rebased on top of Rusty Russell's module.c patch series for 2.6.30.
- replaced starts_with with strstarts.
- replaced __module_data_address with __module_address.
- renamed some data structures, as requested by Rusty Russell
- renamed struct ksplice_pack to struct ksplice_mod_change.
- created new struct ksplice_code, containing the symbols, relocs, and sections for an object file.
- renamed helper modules to old_code modules, and primary modules to new_code modules.
- renamed ksplice_module_list to ksplice_modules.
- renamed ksplice_symbol->vals to candidate_vals
- created new struct ksplice_hooks to organize the Ksplice hooks.
- improved Ksplice's kobject variable names.
- merged apply_patches and reverse_patches.
- added check to prevent reversing an update that has been partially cold-applied.
- added support for patching multi-page data structures.
- added more function-level documentation, as requested by Ted Ts'o
- bail out earlier (to give a better error message) when there are multiple writers to an update's stage file.
Changes between RFC v3 and v1:
- removed use of init_mm, as requested by Christoph Hellwig
Changes between RFC v2 and RFC v3:
- added taint flag, as requested by Alexey Dobriyan
- various speed optimizations
- support for replacing functions mapped read-only (CONFIG_DEBUG_RODATA)
- run-pre matching extended to bug table, ex_table, exported symbol table
- added hooks for calling custom code during the update process
- struct ksplice_export eliminated (struct ksplice_patch used instead)
- minor sysfs API changes
- added support for ksplice-apply's --partial option
- improved -ffunction-sections patches and added them to this patch series
- dropped ARM support for now, for simplicity
No changes between RFC v1 and RFC v2.
==
Jeff Arnold (1):
Ksplice: Support updating x86-32 and x86-64
Tim Abbott (2):
Make section names compatible with -ffunction-sections
-fdata-sections
Ksplice: Export symbols needed for Ksplice
Waseem Daher (1):
x86: Add an option to compile with -ffunction-sections
-fdata-sections
Documentation/ksplice.txt | 304 +++ Documentation/mutex-design.txt | 4 +- MAINTAINERS | 10 + Makefile | 4 + arch/Kconfig | 14 + arch/alpha/kernel/head.S | 2 +- arch/alpha/kernel/init_task.c | 2 +- arch/alpha/kernel/vmlinux.lds.S | 14 +- arch/arm/kernel/head-nommu.S | 2 +- arch/arm/kernel/head.S | 2 +- arch/arm/kernel/init_task.c | 2 +- arch/arm/kernel/vmlinux.lds.S | 14 +- arch/arm/mm/proc-v6.S | 2 +- arch/arm/mm/proc-v7.S | 2 +- arch/arm/mm/tlb-v6.S | 2 +- arch/arm/mm/tlb-v7.S | 2 +- arch/avr32/kernel/init_task.c | 2 +- arch/avr32/kernel/vmlinux.lds.S | 6 +- arch/avr32/mm/init.c | 2 +- arch/blackfin/kernel/vmlinux.lds.S | 2 +- arch/cris/kernel/process.c | 2 +- arch/cris/kernel/vmlinux.lds.S | 2 +- arch/frv/kernel/break.S | 4 +- arch/frv/kernel/entry.S | 2 +- arch/frv/kernel/head-mmu-fr451.S | 2 +- arch/frv/kernel/head-uc-fr401.S | 2 +- arch/frv/kernel/head-uc-fr451.S | 2 +- arch/frv/kernel/head-uc-fr555.S | 2 +- arch/frv/kernel/head.S | 4 +- arch/frv/kernel/init_task.c | 2 +- arch/frv/kernel/vmlinux.lds.S | 18 +- arch/frv/mm/tlb-miss.S | 2 +- arch/h8300/boot/compressed/head.S | 2 +- arch/h8300/boot/compressed/vmlinux.lds | 2 +- arch/h8300/kernel/init_task.c | 2 +- arch/h8300/kernel/vmlinux.lds.S | 2 +- arch/ia64/include/asm/asmmacro.h | 12 +- arch/ia64/include/asm/cache.h | 2 +- arch/ia64/include/asm/percpu.h | 2 +- arch/ia64/kernel/Makefile | 2 +- arch/ia64/kernel/gate-data.S | 2 +- arch/ia64/kernel/gate.S | 8 +- arch/ia64/kernel/gate.lds.S | 10 +- arch/ia64/kernel/head.S | 2 +- arch/ia64/kernel/init_task.c | 4 +- arch/ia64/kernel/ivt.S | 2 +- arch/ia64/kernel/minstate.h | 4 +- arch/ia64/kernel/paravirtentry.S | 2 +- arch/ia64/kernel/vmlinux.lds.S | 48 +- arch/ia64/kvm/vmm_ivt.S | 2 +- arch/ia64/xen/xensetup.S | 2 +- arch/m32r/kernel/head.S | 2 +- arch/m32r/kernel/init_task.c | 2 +- arch/m32r/kernel/vmlinux.lds.S | 8 +- arch/m68k/kernel/head.S | 2 +- arch/m68k/kernel/process.c | 2 +- arch/m68k/kernel/sun3-head.S | 2 +- arch/m68k/kernel/vmlinux-std.lds | 6 +- arch/m68k/kernel/vmlinux-sun3.lds | 4 +- arch/m68knommu/kernel/init_task.c | 2 +- arch/m68knommu/kernel/vmlinux.lds.S | 6 +- arch/m68knommu/platform/68360/head-ram.S | 2 +- arch/m68knommu/platform/68360/head-rom.S | 2 +- arch/mips/kernel/init_task.c | 2 +- arch/mips/kernel/vmlinux.lds.S | 8 +- arch/mips/lasat/image/head.S | 2 +- arch/mips/lasat/image/romscript.normal | 2 +- arch/mn10300/kernel/head.S | 2 +- arch/mn10300/kernel/init_task.c | 2 +- arch/mn10300/kernel/vmlinux.lds.S | 16 +- arch/parisc/include/asm/cache.h | 2 +- arch/parisc/include/asm/system.h | 2 +- arch/parisc/kernel/head.S | 2 +- arch/parisc/kernel/init_task.c | 8 +- arch/parisc/kernel/vmlinux.lds.S | 26 +- arch/powerpc/include/asm/cache.h | 2 +- arch/powerpc/include/asm/page_64.h | 2 +- arch/powerpc/include/asm/ppc_asm.h | 4 +- arch/powerpc/kernel/head_32.S | 2 +- arch/powerpc/kernel/head_40x.S | 2 +- arch/powerpc/kernel/head_44x.S | 2 +- arch/powerpc/kernel/head_8xx.S | 2 +- arch/powerpc/kernel/head_fsl_booke.S | 2 +- arch/powerpc/kernel/init_task.c | 2 +- arch/powerpc/kernel/machine_kexec_64.c | 2 +- arch/powerpc/kernel/vdso.c | 2 +- arch/powerpc/kernel/vdso32/vdso32_wrapper.S | 2 +- arch/powerpc/kernel/vdso64/vdso64_wrapper.S | 2 +- arch/powerpc/kernel/vmlinux.lds.S | 28 +- arch/s390/include/asm/cache.h | 2 +- arch/s390/kernel/head.S | 2 +- arch/s390/kernel/init_task.c | 2 +- arch/s390/kernel/vdso.c | 2 +- arch/s390/kernel/vdso32/vdso32_wrapper.S | 2 +- arch/s390/kernel/vdso64/vdso64_wrapper.S | 2 +- arch/s390/kernel/vmlinux.lds.S | 20 +- arch/sh/include/asm/cache.h | 2 +- arch/sh/kernel/cpu/sh5/entry.S | 4 +- arch/sh/kernel/head_32.S | 2 +- arch/sh/kernel/head_64.S | 2 +- arch/sh/kernel/init_task.c | 2 +- arch/sh/kernel/irq.c | 4 +- arch/sh/kernel/vmlinux_32.lds.S | 14 +- arch/sh/kernel/vmlinux_64.lds.S | 14 +- arch/sparc/boot/btfixupprep.c | 4 +- arch/sparc/include/asm/cache.h | 2 +- arch/sparc/kernel/head_32.S | 4 +- arch/sparc/kernel/head_64.S | 2 +- arch/sparc/kernel/init_task.c | 2 +- arch/sparc/kernel/vmlinux.lds.S | 14 +- arch/um/include/asm/common.lds.S | 4 +- arch/um/kernel/dyn.lds.S | 4 +- arch/um/kernel/init_task.c | 4 +- arch/um/kernel/uml.lds.S | 4 +- arch/x86/Kconfig | 2 + arch/x86/boot/compressed/head_32.S | 2 +- arch/x86/boot/compressed/head_64.S | 2 +- arch/x86/boot/compressed/relocs.c | 2 +- arch/x86/boot/compressed/vmlinux.scr | 2 +- arch/x86/boot/compressed/vmlinux_32.lds | 14 +- arch/x86/boot/compressed/vmlinux_64.lds | 10 +- arch/x86/include/asm/cache.h | 4 +- arch/x86/kernel/acpi/wakeup_32.S | 2 +- arch/x86/kernel/head_32.S | 6 +- arch/x86/kernel/head_64.S | 4 +- arch/x86/kernel/init_task.c | 4 +- arch/x86/kernel/ksplice-arch.c | 96 + arch/x86/kernel/traps.c | 2 +- arch/x86/kernel/vmlinux_32.lds.S | 37 +- arch/x86/kernel/vmlinux_64.lds.S | 27 +- arch/xtensa/kernel/head.S | 2 +- arch/xtensa/kernel/init_task.c | 2 +- arch/xtensa/kernel/vmlinux.lds.S | 6 +- include/asm-frv/init.h | 8 +- include/asm-generic/vmlinux.lds.h | 19 +- include/linux/cache.h | 2 +- include/linux/init.h | 8 +- include/linux/kernel.h | 1 + include/linux/ksplice.h | 224 ++ include/linux/linkage.h | 4 +- include/linux/percpu.h | 10 +- include/linux/spinlock.h | 2 +- kernel/Makefile | 3 + kernel/extable.c | 3 + kernel/ksplice.c | 2995 +++++++++++++++++++++++++++ kernel/module.c | 4 +- kernel/panic.c | 1 + kernel/sched.c | 1 + lib/Kconfig.debug | 18 + lib/bug.c | 1 + scripts/Makefile.modpost | 1 + scripts/mod/modpost.c | 22 +- scripts/recordmcount.pl | 6 +- 153 files changed, 4049 insertions(+), 350 deletions(-) create mode 100644 Documentation/ksplice.txt create mode 100644 arch/x86/kernel/ksplice-arch.c create mode 100644 include/linux/ksplice.h create mode 100644 kernel/ksplice.c
PATCH v2 1/4 Make section names compatible with -ffunction-sections -fdata-sections
The purpose of this patch is to make it possible to build the kernel with "gcc -ffunction-sections -fdata-sections". This is a key step towards being able to compile the kernel using the --gc-sections linker option, which can be used to decrease the vmlinux size by garbage collecting unused functions. Also, Ksplice's 'run-pre matching' process is much simpler if the original kernel was compiled with -ffunction-sections and -fdata-sections.
Currently, the kernel uses a number of "magic" section names such as ".data.nosave" and ".text.head".
The problem is that with -ffunction-sections -fdata-sections, gcc places code like
static void head(...) {...}
in the .text.head section, and code like
static int nosave = 1;
in the .data.nosave section, causing code to be inappropriately placed in the "magic" sections. This patch renames all "magic" section names used by the kernel to use ".." rather than "." as the delimiter between the section prefix (e.g. ".text") and suffix (e.g. "head"), so that ".data.nosave" becomes ".data..nosave", etc. The key property of these names is that there are no collisions between the kernel's "magic" sections and the sections generated by gcc's -ffunction-sections and -fdata-sections options. One can then reference the sections generated by -ffunction-sections using a linker script pattern such as *(.text.[A-Za-z$_]*)
This patch is based on an some earlier patches by Denys Vlasenko. Those earlier patches used section names like ".kernel.text.head". Because these names did not begin with e.g. ".text", the assembler did not automatically use the correct section flags for them, and so one needed to explicitly declare the sections flags when declaring a section in assembly files using code such as:
.section .kernel.text.head, "ax", @progbits
These explicit section flags in assembly files turned out to be a common source of confusion, and so I rewrote the patch with this new section naming scheme suggested by Anders Kaseorg.
--- Documentation/mutex-design.txt | 4 +- arch/alpha/kernel/head.S | 2 +- arch/alpha/kernel/init_task.c | 2 +- arch/alpha/kernel/vmlinux.lds.S | 14 ++++---- arch/arm/kernel/head-nommu.S | 2 +- arch/arm/kernel/head.S | 2 +- arch/arm/kernel/init_task.c | 2 +- arch/arm/kernel/vmlinux.lds.S | 14 ++++---- arch/arm/mm/proc-v6.S | 2 +- arch/arm/mm/proc-v7.S | 2 +- arch/arm/mm/tlb-v6.S | 2 +- arch/arm/mm/tlb-v7.S | 2 +- arch/avr32/kernel/init_task.c | 2 +- arch/avr32/kernel/vmlinux.lds.S | 6 ++-- arch/avr32/mm/init.c | 2 +- arch/blackfin/kernel/vmlinux.lds.S | 2 +- arch/cris/kernel/process.c | 2 +- arch/cris/kernel/vmlinux.lds.S | 2 +- arch/frv/kernel/break.S | 4 +- arch/frv/kernel/entry.S | 2 +- arch/frv/kernel/head-mmu-fr451.S | 2 +- arch/frv/kernel/head-uc-fr401.S | 2 +- arch/frv/kernel/head-uc-fr451.S | 2 +- arch/frv/kernel/head-uc-fr555.S | 2 +- arch/frv/kernel/head.S | 4 +- arch/frv/kernel/init_task.c | 2 +- arch/frv/kernel/vmlinux.lds.S | 18 +++++----- arch/frv/mm/tlb-miss.S | 2 +- arch/h8300/boot/compressed/head.S | 2 +- arch/h8300/boot/compressed/vmlinux.lds | 2 +- arch/h8300/kernel/init_task.c | 2 +- arch/h8300/kernel/vmlinux.lds.S | 2 +- arch/ia64/include/asm/asmmacro.h | 12 +++--- arch/ia64/include/asm/cache.h | 2 +- arch/ia64/include/asm/percpu.h | 2 +- arch/ia64/kernel/Makefile | 2 +- arch/ia64/kernel/gate-data.S | 2 +- arch/ia64/kernel/gate.S | 8 ++-- arch/ia64/kernel/gate.lds.S | 10 +++--- arch/ia64/kernel/head.S | 2 +- arch/ia64/kernel/init_task.c | 4 +- arch/ia64/kernel/ivt.S | 2 +- arch/ia64/kernel/minstate.h | 4 +- arch/ia64/kernel/paravirtentry.S | 2 +- arch/ia64/kernel/vmlinux.lds.S | 48 +++++++++++++------------- arch/ia64/kvm/vmm_ivt.S | 2 +- arch/ia64/xen/xensetup.S | 2 +- arch/m32r/kernel/head.S | 2 +- arch/m32r/kernel/init_task.c | 2 +- arch/m32r/kernel/vmlinux.lds.S | 8 ++-- arch/m68k/kernel/head.S | 2 +- arch/m68k/kernel/process.c | 2 +- arch/m68k/kernel/sun3-head.S | 2 +- arch/m68k/kernel/vmlinux-std.lds | 6 ++-- arch/m68k/kernel/vmlinux-sun3.lds | 4 +- arch/m68knommu/kernel/init_task.c | 2 +- arch/m68knommu/kernel/vmlinux.lds.S | 6 ++-- arch/m68knommu/platform/68360/head-ram.S | 2 +- arch/m68knommu/platform/68360/head-rom.S | 2 +- arch/mips/kernel/init_task.c | 2 +- arch/mips/kernel/vmlinux.lds.S | 8 ++-- arch/mips/lasat/image/head.S | 2 +- arch/mips/lasat/image/romscript.normal | 2 +- arch/mn10300/kernel/head.S | 2 +- arch/mn10300/kernel/init_task.c | 2 +- arch/mn10300/kernel/vmlinux.lds.S | 16 ++++---- arch/parisc/include/asm/cache.h | 2 +- arch/parisc/include/asm/system.h | 2 +- arch/parisc/kernel/head.S | 2 +- arch/parisc/kernel/init_task.c | 8 ++-- arch/parisc/kernel/vmlinux.lds.S | 26 +++++++------- arch/powerpc/include/asm/cache.h | 2 +- arch/powerpc/include/asm/page_64.h | 2 +- arch/powerpc/include/asm/ppc_asm.h | 4 +- arch/powerpc/kernel/head_32.S | 2 +- arch/powerpc/kernel/head_40x.S | 2 +- arch/powerpc/kernel/head_44x.S | 2 +- arch/powerpc/kernel/head_8xx.S | 2 +- arch/powerpc/kernel/head_fsl_booke.S | 2 +- arch/powerpc/kernel/init_task.c | 2 +- arch/powerpc/kernel/machine_kexec_64.c | 2 +- arch/powerpc/kernel/vdso.c | 2 +- arch/powerpc/kernel/vdso32/vdso32_wrapper.S | 2 +- arch/powerpc/kernel/vdso64/vdso64_wrapper.S | 2 +- arch/powerpc/kernel/vmlinux.lds.S | 28 ++++++++-------- arch/s390/include/asm/cache.h | 2 +- arch/s390/kernel/head.S | 2 +- arch/s390/kernel/init_task.c | 2 +- arch/s390/kernel/vdso.c | 2 +- arch/s390/kernel/vdso32/vdso32_wrapper.S | 2 +- arch/s390/kernel/vdso64/vdso64_wrapper.S | 2 +- arch/s390/kernel/vmlinux.lds.S | 20 +++++----- arch/sh/include/asm/cache.h | 2 +- arch/sh/kernel/cpu/sh5/entry.S | 4 +- arch/sh/kernel/head_32.S | 2 +- arch/sh/kernel/head_64.S | 2 +- arch/sh/kernel/init_task.c | 2 +- arch/sh/kernel/irq.c | 4 +- arch/sh/kernel/vmlinux_32.lds.S | 14 ++++---- arch/sh/kernel/vmlinux_64.lds.S | 14 ++++---- arch/sparc/boot/btfixupprep.c | 4 +- arch/sparc/include/asm/cache.h | 2 +- arch/sparc/kernel/head_32.S | 4 +- arch/sparc/kernel/head_64.S | 2 +- arch/sparc/kernel/init_task.c | 2 +- arch/sparc/kernel/vmlinux.lds.S | 14 ++++---- arch/um/include/asm/common.lds.S | 4 +- arch/um/kernel/dyn.lds.S | 4 +- arch/um/kernel/init_task.c | 4 +- arch/um/kernel/uml.lds.S | 4 +- arch/x86/boot/compressed/head_32.S | 2 +- arch/x86/boot/compressed/head_64.S | 2 +- arch/x86/boot/compressed/relocs.c | 2 +- arch/x86/boot/compressed/vmlinux.scr | 2 +- arch/x86/boot/compressed/vmlinux_32.lds | 14 +++++-- arch/x86/boot/compressed/vmlinux_64.lds | 10 +++-- arch/x86/include/asm/cache.h | 4 +- arch/x86/kernel/acpi/wakeup_32.S | 2 +- arch/x86/kernel/head_32.S | 6 ++-- arch/x86/kernel/head_64.S | 4 +- arch/x86/kernel/init_task.c | 4 +- arch/x86/kernel/traps.c | 2 +- arch/x86/kernel/vmlinux_32.lds.S | 36 ++++++++++---------- arch/x86/kernel/vmlinux_64.lds.S | 26 +++++++------- arch/xtensa/kernel/head.S | 2 +- arch/xtensa/kernel/init_task.c | 2 +- arch/xtensa/kernel/vmlinux.lds.S | 6 ++-- include/asm-frv/init.h | 8 ++-- include/asm-generic/vmlinux.lds.h | 14 ++++---- include/linux/cache.h | 2 +- include/linux/init.h | 8 ++-- include/linux/linkage.h | 4 +- include/linux/percpu.h | 10 +++--- include/linux/spinlock.h | 2 +- kernel/module.c | 2 +- scripts/mod/modpost.c | 12 +++--- scripts/recordmcount.pl | 6 ++-- 137 files changed, 355 insertions(+), 347 deletions(-)
Documentation/mutex-design.txt +2 -2
@@ -66,14 +66,14 @@ of advantages of mutexes: c0377ccb <mutex_lock>: c0377ccb: f0 ff 08 lock decl (%eax) - c0377cce: 78 0e js c0377cde <.text.lock.mutex> + c0377cce: 78 0e js c0377cde <.text..lock.mutex> c0377cd0: c3 ret the unlocking fastpath is equally tight: c0377cd1 <mutex_unlock>: c0377cd1: f0 ff 00 lock incl (%eax) - c0377cd4: 7e 0f jle c0377ce5 <.text.lock.mutex+0x7> + c0377cd4: 7e 0f jle c0377ce5 <.text..lock.mutex+0x7> c0377cd6: c3 ret - 'struct mutex' semantics are well-defined and are enforced if
arch/alpha/kernel/head.S +1 -1
@@ -10,7 +10,7 @@ #include <asm/system.h> #include <asm/asm-offsets.h> -.section .text.head, "ax" +.section .text..head, "ax" .globl swapper_pg_dir .globl _stext swapper_pg_dir=SWAPPER_PGD
arch/alpha/kernel/init_task.c +1 -1
@@ -17,5 +17,5 @@ EXPORT_SYMBOL(init_mm);EXPORT_SYMBOL (init_task); union thread_union init_thread_union - __attribute__((section(".data.init_thread"))) + __attribute__((section(".data..init_thread"))) = { INIT_THREAD_INFO(init_task) };
arch/alpha/kernel/vmlinux.lds.S +7 -7
@@ -16,7 +16,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { - *(.text.head) + *(.text..head) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -93,18 +93,18 @@ SECTIONS /* Freed after init ends here */ /* Note 2 page alignment above. */ - .data.init_thread : { - *(.data.init_thread) + .data..init_thread : { + *(.data..init_thread) } . = ALIGN(PAGE_SIZE); - .data.page_aligned : { - *(.data.page_aligned) + .data..page_aligned : { + *(.data..page_aligned) } . = ALIGN(64); - .data.cacheline_aligned : { - *(.data.cacheline_aligned) + .data..cacheline_aligned : { + *(.data..cacheline_aligned) } _data = .;
arch/arm/kernel/head-nommu.S +1 -1
@@ -32,7 +32,7 @@ * numbers for r1. * */ - .section ".text.head", "ax" + .section ".text..head", "ax" ENTRY(stext) msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode @ and irqs disabled
arch/arm/kernel/head.S +1 -1
@@ -74,7 +74,7 @@ * crap here - that's what the boot loader (or in extreme, well justified * circumstances, zImage) is for. */ - .section ".text.head", "ax" + .section ".text..head", "ax" ENTRY(stext) msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode @ and irqs disabled
arch/arm/kernel/init_task.c +1 -1
@@ -29,7 +29,7 @@ EXPORT_SYMBOL(init_mm);* The things we do for performance.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/arm/kernel/vmlinux.lds.S +7 -7
@@ -23,10 +23,10 @@ SECTIONS #else . = PAGE_OFFSET + TEXT_OFFSET; #endif - .text.head : { + .text..head : { _stext = .; _sinittext = .; - *(.text.head) + *(.text..head) } .init : { /* Init code and data */
@@ -65,8 +65,8 @@ SECTIONS #endif . = ALIGN(4096); __per_cpu_start = .; - *(.data.percpu) - *(.data.percpu.shared_aligned) + *(.data..percpu) + *(.data..percpu.shared_aligned) __per_cpu_end = .; #ifndef CONFIG_XIP_KERNEL __init_begin = _stext;
@@ -125,7 +125,7 @@ SECTIONS * first, the init task union, aligned * to an 8192 byte boundary. */ - *(.data.init_task) + *(.data..init_task) #ifdef CONFIG_XIP_KERNEL . = ALIGN(4096);
@@ -137,7 +137,7 @@ SECTIONS . = ALIGN(4096); __nosave_begin = .; - *(.data.nosave) + *(.data..nosave) . = ALIGN(4096); __nosave_end = .;
@@ -145,7 +145,7 @@ SECTIONS * then the cacheline aligned data */ . = ALIGN(32); - *(.data.cacheline_aligned) + *(.data..cacheline_aligned) /* * The exception fixup table (might need resorting at runtime)
arch/arm/mm/proc-v6.S +1 -1
@@ -132,7 +132,7 @@ cpu_v6_name: .asciz "ARMv6-compatible processor" .align - .section ".text.init", #alloc, #execinstr + .section ".text..init", #alloc, #execinstr /* * __v6_setup
arch/arm/mm/proc-v7.S +1 -1
@@ -153,7 +153,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - .section ".text.init", #alloc, #execinstr + .section ".text..init", #alloc, #execinstr /* * __v7_setup
arch/arm/mm/tlb-v6.S +1 -1
@@ -87,7 +87,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr - .section ".text.init", #alloc, #execinstr + .section ".text..init", #alloc, #execinstr .type v6wbi_tlb_fns, #object ENTRY(v6wbi_tlb_fns)
arch/arm/mm/tlb-v7.S +1 -1
@@ -80,7 +80,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov pc, lr ENDPROC(v7wbi_flush_kern_tlb_range) - .section ".text.init", #alloc, #execinstr + .section ".text..init", #alloc, #execinstr .type v7wbi_tlb_fns, #object ENTRY(v7wbi_tlb_fns)
arch/avr32/kernel/init_task.c +1 -1
@@ -23,7 +23,7 @@ EXPORT_SYMBOL(init_mm);* Initial thread structure. Must be aligned on an 8192-byte boundary. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/avr32/kernel/vmlinux.lds.S +3 -3
@@ -95,15 +95,15 @@ SECTIONS /* * First, the init task union, aligned to an 8K boundary. */ - *(.data.init_task) + *(.data..init_task) /* Then, the page-aligned data */ . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) + *(.data..page_aligned) /* Then, the cacheline aligned data */ . = ALIGN(L1_CACHE_BYTES); - *(.data.cacheline_aligned) + *(.data..cacheline_aligned) /* And the rest... */ *(.data.rel*)
arch/avr32/mm/init.c +1 -1
@@ -24,7 +24,7 @@#include <asm/setup.h> #include <asm/sections.h> -#define __page_aligned __attribute__((section(".data.page_aligned"))) +#define __page_aligned __attribute__((section(".data..page_aligned"))) DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
arch/blackfin/kernel/vmlinux.lds.S +1 -1
@@ -94,7 +94,7 @@ SECTIONS __sdata = .; /* This gets done first, so the glob doesn't suck it in */ . = ALIGN(32); - *(.data.cacheline_aligned) + *(.data..cacheline_aligned) #if !L1_DATA_A_LENGTH . = ALIGN(32);
arch/cris/kernel/process.c +1 -1
@@ -51,7 +51,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/cris/kernel/vmlinux.lds.S +1 -1
@@ -68,7 +68,7 @@ SECTIONS _edata = . ; . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */ - .data.init_task : { *(.data.init_task) } + .data..init_task : { *(.data..init_task) } . = ALIGN(PAGE_SIZE); /* Init code and data. */ __init_begin = .;
arch/frv/kernel/break.S +2 -2
@@ -21,7 +21,7 @@ # # the break handler has its own stack # - .section .bss.stack + .section .bss..stack .globl __break_user_context .balign THREAD_SIZE __break_stack:
@@ -63,7 +63,7 @@ __break_trace_through_exceptions: # entry point for Break Exceptions/Interrupts # ############################################################################### - .section .text.break + .section .text..break .balign 4 .globl __entry_break __entry_break:
arch/frv/kernel/entry.S +1 -1
@@ -38,7 +38,7 @@ #define nr_syscalls ((syscall_table_size)/4) - .section .text.entry + .section .text..entry .balign 4 .macro LEDS val
arch/frv/kernel/head-mmu-fr451.S +1 -1
@@ -31,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + .section .text..init,"ax" .balign 4 ###############################################################################
arch/frv/kernel/head-uc-fr401.S +1 -1
@@ -30,7 +30,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + .section .text..init,"ax" .balign 4 ###############################################################################
arch/frv/kernel/head-uc-fr451.S +1 -1
@@ -30,7 +30,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + .section .text..init,"ax" .balign 4 ###############################################################################
arch/frv/kernel/head-uc-fr555.S +1 -1
@@ -29,7 +29,7 @@ #define __551_LCR 0xfeff1100 #define __551_LSBR 0xfeff1c00 - .section .text.init,"ax" + .section .text..init,"ax" .balign 4 ###############################################################################
arch/frv/kernel/head.S +2 -2
@@ -27,7 +27,7 @@ # command line string # ############################################################################### - .section .text.head,"ax" + .section .text..head,"ax" .balign 4 .globl _boot, __head_reference
@@ -541,7 +541,7 @@ __head_end: .size _boot, .-_boot # provide a point for GDB to place a break - .section .text.start,"ax" + .section .text..start,"ax" .globl _start .balign 4 _start:
arch/frv/kernel/init_task.c +1 -1
@@ -24,7 +24,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/frv/kernel/vmlinux.lds.S +9 -9
@@ -26,7 +26,7 @@ SECTIONS _sinittext = .; .init.text : { - *(.text.head) + *(.text..head) #ifndef CONFIG_DEBUG_INFO INIT_TEXT EXIT_TEXT
@@ -71,13 +71,13 @@ SECTIONS /* put sections together that have massive alignment issues */ . = ALIGN(THREAD_SIZE); - .data.init_task : { + .data..init_task : { /* init task record & stack */ - *(.data.init_task) + *(.data..init_task) } . = ALIGN(L1_CACHE_BYTES); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + .data..cacheline_aligned : { *(.data..cacheline_aligned) } .trap : { /* trap table management - read entry-table.S before modifying */
@@ -94,10 +94,10 @@ SECTIONS _text = .; _stext = .; .text : { - *(.text.start) - *(.text.entry) - *(.text.break) - *(.text.tlbmiss) + *(.text..start) + *(.text..entry) + *(.text..break) + *(.text..tlbmiss) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -152,7 +152,7 @@ SECTIONS .sbss : { *(.sbss .sbss.*) } .bss : { *(.bss .bss.*) } - .bss.stack : { *(.bss) } + .bss..stack : { *(.bss) } __bss_stop = .; _end = . ;
arch/frv/mm/tlb-miss.S +1 -1
@@ -16,7 +16,7 @@ #include <asm/highmem.h> #include <asm/spr-regs.h> - .section .text.tlbmiss + .section .text..tlbmiss .balign 4 .globl __entry_insn_mmu_miss
arch/h8300/boot/compressed/head.S +1 -1
@@ -9,7 +9,7 @@ #define SRAM_START 0xff4000 - .section .text.startup + .section .text..startup .global startup startup: mov.l #SRAM_START+0x8000, sp
arch/h8300/boot/compressed/vmlinux.lds +1 -1
@@ -4,7 +4,7 @@ SECTIONS { __stext = . ; __text = .; - *(.text.startup) + *(.text..startup) *(.text) __etext = . ; }
arch/h8300/kernel/init_task.c +1 -1
@@ -36,6 +36,6 @@ EXPORT_SYMBOL(init_task);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };
arch/h8300/kernel/vmlinux.lds.S +1 -1
@@ -101,7 +101,7 @@ SECTIONS ___data_start = . ; . = ALIGN(0x2000) ; - *(.data.init_task) + *(.data..init_task) . = ALIGN(0x4) ; DATA_DATA . = ALIGN(0x4) ;
arch/ia64/include/asm/asmmacro.h +6 -6
@@ -70,12 +70,12 @@ name:* path (ivt.S - TLB miss processing) or in places where it might not be * safe to use a "tpa" instruction (mca_asm.S - error recovery). */ - .section ".data.patch.vtop", "a" // declare section & section attributes + .section ".data..patch.vtop", "a" // declare section & section attributes .previous#define LOAD_PHYSICAL (pr, reg, obj) \ [1:](pr)movl reg = obj; \ - .xdata4 ".data.patch.vtop", 1b-. + .xdata4 ".data..patch.vtop", 1b-./* * For now, we always put in the McKinley E9 workaround. On CPUs that don't need it,
@@ -84,11 +84,11 @@ name:#define DO_MCKINLEY_E9_WORKAROUND #ifdef DO_MCKINLEY_E9_WORKAROUND - .section ".data.patch.mckinley_e9", "a" + .section ".data..patch.mckinley_e9", "a" .previous/* workaround for Itanium 2 Errata 9: */ # define FSYS_RETURN \ - .xdata4 ".data.patch.mckinley_e9", 1f-.; \ + .xdata4 ".data..patch.mckinley_e9", 1f-.; \ 1:{ .mib; \ nop.m 0; \ mov r16=ar.pfs; \
@@ -107,11 +107,11 @@ name:* If physical stack register size is different from DEF_NUM_STACK_REG, * dynamically patch the kernel for correct size. */ - .section ".data.patch.phys_stack_reg", "a" + .section ".data..patch.phys_stack_reg", "a" .previous#define LOAD_PHYS_STACK_REG_SIZE (reg) \ [1:] adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0; \ - .xdata4 ".data.patch.phys_stack_reg", 1b-. + .xdata4 ".data..patch.phys_stack_reg", 1b-./* * Up until early 2004, use of .align within a function caused bad unwind info.
arch/ia64/include/asm/cache.h +1 -1
@@ -24,6 +24,6 @@# define SMP_CACHE_BYTES (1 << 3)#endif -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly")))#endif /* _ASM_IA64_CACHE_H */
arch/ia64/include/asm/percpu.h +1 -1
@@ -27,7 +27,7 @@ extern void *per_cpu_init(void);#else /* ! SMP */ -#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu"))) +#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data..percpu")))#define per_cpu_init () (__phys_per_cpu_start)
arch/ia64/kernel/Makefile +1 -1
@@ -72,7 +72,7 @@ GATECFLAGS_gate-syms.o = -r $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE $(call if_changed,gate) -# gate-data.o contains the gate DSO image as data in section .data.gate. +# gate-data.o contains the gate DSO image as data in section .data..gate. # We must build gate.so before we can assemble it. # Note: kbuild does not track this dependency due to usage of .incbin $(obj)/gate-data.o: $(obj)/gate.so
arch/ia64/kernel/gate-data.S +1 -1
@@ -1,3 +1,3 @@ - .section .data.gate, "aw" + .section .data..gate, "aw" .incbin "arch/ia64/kernel/gate.so"
arch/ia64/kernel/gate.S +4 -4
@@ -20,18 +20,18 @@ * to targets outside the shared object) and to avoid multi-phase kernel builds, we * simply create minimalistic "patch lists" in special ELF sections. */ - .section ".data.patch.fsyscall_table", "a" + .section ".data..patch.fsyscall_table", "a" .previous #define LOAD_FSYSCALL_TABLE(reg) \ [1:] movl reg=0; \ - .xdata4 ".data.patch.fsyscall_table", 1b-. + .xdata4 ".data..patch.fsyscall_table", 1b-. - .section ".data.patch.brl_fsys_bubble_down", "a" + .section ".data..patch.brl_fsys_bubble_down", "a" .previous #define BRL_COND_FSYS_BUBBLE_DOWN(pr) \ [1:](pr)brl.cond.sptk 0; \ ;; \ - .xdata4 ".data.patch.brl_fsys_bubble_down", 1b-. + .xdata4 ".data..patch.brl_fsys_bubble_down", 1b-. GLOBAL_ENTRY(__kernel_syscall_via_break) .prologue
arch/ia64/kernel/gate.lds.S +5 -5
@@ -32,21 +32,21 @@ SECTIONS */ . = GATE_ADDR + 0x600; - .data.patch : { + .data..patch : { __start_gate_mckinley_e9_patchlist = .; - *(.data.patch.mckinley_e9) + *(.data..patch.mckinley_e9) __end_gate_mckinley_e9_patchlist = .; __start_gate_vtop_patchlist = .; - *(.data.patch.vtop) + *(.data..patch.vtop) __end_gate_vtop_patchlist = .; __start_gate_fsyscall_patchlist = .; - *(.data.patch.fsyscall_table) + *(.data..patch.fsyscall_table) __end_gate_fsyscall_patchlist = .; __start_gate_brl_fsys_bubble_down_patchlist = .; - *(.data.patch.brl_fsys_bubble_down) + *(.data..patch.brl_fsys_bubble_down) __end_gate_brl_fsys_bubble_down_patchlist = .; } :readable
arch/ia64/kernel/head.S +1 -1
@@ -181,7 +181,7 @@ swapper_pg_dir: halt_msg: stringz "Halting kernel\n" - .section .text.head,"ax" + .section .text..head,"ax" .global start_ap
arch/ia64/kernel/init_task.c +2 -2
@@ -27,7 +27,7 @@ EXPORT_SYMBOL(init_mm);* Initial task structure. * * We need to make sure that this is properly aligned due to the way process stacks are -* handled. This is done by having a special ".data.init_task" section... +* handled. This is done by having a special ".data..init_task" section... */ #define init_thread_info init_task_mem.s.thread_info
@@ -37,7 +37,7 @@ union {struct thread_info thread_info; } s;unsigned long stack[KERNEL_STACK_SIZE /sizeof (unsigned long )]; -} init_task_mem asm ("init_task") __attribute__((section(".data.init_task"))) = {{ +} init_task_mem asm ("init_task") __attribute__((section(".data..init_task"))) = {{ .task = INIT_TASK(init_task_mem.s.task), .thread_info = INIT_THREAD_INFO(init_task_mem.s.task) }};
arch/ia64/kernel/ivt.S +1 -1
@@ -83,7 +83,7 @@ mov r19=n;; /* prepare to save predicates */ \ br.sptk.many dispatch_to_fault_handler - .section .text.ivt,"ax" + .section .text..ivt,"ax" .align 32768 // align on 32KB boundary .global ia64_ivt
arch/ia64/kernel/minstate.h +2 -2
@@ -16,7 +16,7 @@#define ACCOUNT_SYS_ENTER #endif -.section ".data.patch.rse", "a" +.section ".data..patch.rse", "a" .previous/*
@@ -215,7 +215,7 @@ (pUStk) extr.u r17=r18,3,6; \ (pUStk) sub r16=r18,r22; \ [1:](pKStk) br.cond.sptk.many 1f; \ - .xdata4 ".data.patch.rse",1b-. \ + .xdata4 ".data..patch.rse",1b-. \ ;; \ cmp.ge p6,p7 = 33,r17; \ ;; \
arch/ia64/kernel/paravirtentry.S +1 -1
@@ -25,7 +25,7 @@ #include "entry.h" #define DATA8(sym, init_value) \ - .pushsection .data.read_mostly ; \ + .pushsection .data..read_mostly ; \ .align 8 ; \ .global sym ; \ sym: ; \
arch/ia64/kernel/vmlinux.lds.S +24 -24
112 lines not on this page · raw message
arch/ia64/kvm/vmm_ivt.S +1 -1
@@ -104,7 +104,7 @@ GLOBAL_ENTRY(kvm_vmm_panic) br.call.sptk.many b6=vmm_panic_handler; END(kvm_vmm_panic) - .section .text.ivt,"ax" + .section .text..ivt,"ax" .align 32768 // align on 32KB boundary .global kvm_ia64_ivt
arch/ia64/xen/xensetup.S +1 -1
@@ -14,7 +14,7 @@ #include <linux/init.h> #include <xen/interface/elfnote.h> - .section .data.read_mostly + .section .data..read_mostly .align 8 .global xen_domain_type xen_domain_type:
arch/m32r/kernel/head.S +1 -1
@@ -23,7 +23,7 @@ __INITDATA /* * References to members of the boot_cpu_data structure. */ -.section .text.head, "ax" +.section .text..head, "ax" .global start_kernel .global __bss_start .global _end
arch/m32r/kernel/init_task.c +1 -1
@@ -25,7 +25,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/m32r/kernel/vmlinux.lds.S +4 -4
@@ -27,7 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { - *(.text.head) + *(.text..head) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -57,17 +57,17 @@ SECTIONS . = ALIGN(4096); __nosave_begin = .; - .data_nosave : { *(.data.nosave) } + .data_nosave : { *(.data..nosave) } . = ALIGN(4096); __nosave_end = .; . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + .data..cacheline_aligned : { *(.data..cacheline_aligned) } _edata = .; /* End of data section */ . = ALIGN(8192); /* init_task */ - .data.init_task : { *(.data.init_task) } + .data..init_task : { *(.data..init_task) } /* will be freed after init */ . = ALIGN(4096); /* Init code and data */
arch/m68k/kernel/head.S +1 -1
@@ -577,7 +577,7 @@ func_define putn,1 #endif .endm -.section ".text.head","ax" +.section ".text..head","ax" ENTRY(_stext) /* * Version numbers of the bootinfo interface
arch/m68k/kernel/process.c +1 -1
@@ -47,7 +47,7 @@ struct mm_struct init_mm = INIT_MM(init_mm);EXPORT_SYMBOL (init_mm); union thread_union init_thread_union -__attribute__((section(".data.init_task"), aligned(THREAD_SIZE))) +__attribute__((section(".data..init_task"), aligned(THREAD_SIZE))) = { INIT_THREAD_INFO(init_task) };/* initial task structure */
arch/m68k/kernel/sun3-head.S +1 -1
@@ -29,7 +29,7 @@ kernel_pmd_table: .skip 0x2000 .globl kernel_pg_dir .equ kernel_pg_dir,kernel_pmd_table - .section .text.head + .section .text..head ENTRY(_stext) ENTRY(_start)
arch/m68k/kernel/vmlinux-std.lds +3 -3
@@ -12,7 +12,7 @@ SECTIONS . = 0x1000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + *(.text..head) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -35,7 +35,7 @@ SECTIONS } . = ALIGN(16); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + .data..cacheline_aligned : { *(.data..cacheline_aligned) } .bss : { *(.bss) } /* BSS */
@@ -78,7 +78,7 @@ SECTIONS . = ALIGN(8192); __init_end = .; - .data.init_task : { *(.data.init_task) } /* The initial task and kernel stack */ + .data..init_task : { *(.data..init_task) } /* The initial task and kernel stack */ _end = . ;
arch/m68k/kernel/vmlinux-sun3.lds +2 -2
@@ -12,7 +12,7 @@ SECTIONS . = 0xE002000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + *(.text..head) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -70,7 +70,7 @@ __init_begin = .; #endif . = ALIGN(PAGE_SIZE); __init_end = .; - .data.init.task : { *(.data.init_task) } + .data..init.task : { *(.data..init_task) } .bss : { *(.bss) } /* BSS */
arch/m68knommu/kernel/init_task.c +1 -1
@@ -36,6 +36,6 @@ EXPORT_SYMBOL(init_task);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };
arch/m68knommu/kernel/vmlinux.lds.S +3 -3
@@ -55,7 +55,7 @@ SECTIONS { .romvec : { __rom_start = . ; _romvec = .; - *(.data.initvect) + *(.data..initvect) } > romvec #endif
@@ -66,7 +66,7 @@ SECTIONS { TEXT_TEXT SCHED_TEXT LOCK_TEXT - *(.text.lock) + *(.text..lock) . = ALIGN(16); /* Exception table */ __start___ex_table = .;
@@ -148,7 +148,7 @@ SECTIONS { _sdata = . ; DATA_DATA . = ALIGN(8192) ; - *(.data.init_task) + *(.data..init_task) _edata = . ; } > DATA
arch/m68knommu/platform/68360/head-ram.S +1 -1
@@ -280,7 +280,7 @@ _dprbase: * and then overwritten as needed. */ -.section ".data.initvect","awx" +.section ".data..initvect","awx" .long RAMEND /* Reset: Initial Stack Pointer - 0. */ .long _start /* Reset: Initial Program Counter - 1. */ .long buserr /* Bus Error - 2. */
arch/m68knommu/platform/68360/head-rom.S +1 -1
@@ -291,7 +291,7 @@ _dprbase: * and then overwritten as needed. */ -.section ".data.initvect","awx" +.section ".data..initvect","awx" .long RAMEND /* Reset: Initial Stack Pointer - 0. */ .long _start /* Reset: Initial Program Counter - 1. */ .long buserr /* Bus Error - 2. */
arch/mips/kernel/init_task.c +1 -1
@@ -26,7 +26,7 @@ EXPORT_SYMBOL(init_mm);* The things we do for performance.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"), + __attribute__((__section__(".data..init_task"), __aligned__(THREAD_SIZE))) = { INIT_THREAD_INFO(init_task) };
arch/mips/kernel/vmlinux.lds.S +4 -4
@@ -77,7 +77,7 @@ SECTIONS * object file alignment. Using 32768 */ . = ALIGN(_PAGE_SIZE); - *(.data.init_task) + *(.data..init_task) DATA_DATA CONSTRUCTORS
@@ -99,14 +99,14 @@ SECTIONS . = ALIGN(_PAGE_SIZE); .data_nosave : { __nosave_begin = .; - *(.data.nosave) + *(.data..nosave) } . = ALIGN(_PAGE_SIZE); __nosave_end = .; . = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT); - .data.cacheline_aligned : { - *(.data.cacheline_aligned) + .data..cacheline_aligned : { + *(.data..cacheline_aligned) } _edata = .; /* End of data section */
arch/mips/lasat/image/head.S +1 -1
@@ -1,7 +1,7 @@ #include <asm/lasat/head.h> .text - .section .text.start, "ax" + .section .text..start, "ax" .set noreorder .set mips3
arch/mips/lasat/image/romscript.normal +1 -1
@@ -4,7 +4,7 @@ SECTIONS { .text : { - *(.text.start) + *(.text..start) } /* Data in ROM */
arch/mn10300/kernel/head.S +1 -1
@@ -19,7 +19,7 @@ #include <asm/param.h> #include <asm/unit/serial.h> - .section .text.head,"ax" + .section .text..head,"ax" ############################################################################### #
arch/mn10300/kernel/init_task.c +1 -1
@@ -31,7 +31,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/mn10300/kernel/vmlinux.lds.S +8 -8
@@ -28,7 +28,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { *( - .text.head + .text..head .text ) TEXT_TEXT
@@ -58,25 +58,25 @@ SECTIONS . = ALIGN(PAGE_SIZE); __nosave_begin = .; - .data_nosave : { *(.data.nosave) } + .data_nosave : { *(.data..nosave) } . = ALIGN(PAGE_SIZE); __nosave_end = .; . = ALIGN(PAGE_SIZE); - .data.page_aligned : { *(.data.idt) } + .data..page_aligned : { *(.data..idt) } . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + .data..cacheline_aligned : { *(.data..cacheline_aligned) } /* rarely changed data like cpu maps */ . = ALIGN(32); - .data.read_mostly : AT(ADDR(.data.read_mostly)) { - *(.data.read_mostly) + .data..read_mostly : AT(ADDR(.data..read_mostly)) { + *(.data..read_mostly) _edata = .; /* End of data section */ } . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : { *(.data.init_task) } + .data..init_task : { *(.data..init_task) } /* might get freed after init */ . = ALIGN(PAGE_SIZE);
@@ -134,7 +134,7 @@ SECTIONS __bss_start = .; /* BSS */ .bss : { - *(.bss.page_aligned) + *(.bss..page_aligned) *(.bss) } . = ALIGN(4);
arch/parisc/include/asm/cache.h +1 -1
@@ -28,7 +28,7 @@#define SMP_CACHE_BYTES L1_CACHE_BYTES -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly")))void parisc_cache_init (void );/* initializes cache-flushing */ void disable_sr_hashing_asm (int );/* low level support for above */
arch/parisc/include/asm/system.h +1 -1
@@ -174,7 +174,7 @@ static inline void set_eiem(unsigned long val) })#ifdef CONFIG_SMP -# define __lock_aligned __attribute__((__section__(".data.lock_aligned"))) +# define __lock_aligned __attribute__((__section__(".data..lock_aligned")))#endif #define arch_align_stack (x) (x)
arch/parisc/kernel/head.S +1 -1
@@ -345,7 +345,7 @@ smp_slave_stext: ENDPROC(stext) #ifndef CONFIG_64BIT - .section .data.read_mostly + .section .data..read_mostly .align 4 .export $global$,data
arch/parisc/kernel/init_task.c +4 -4
@@ -48,7 +48,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) = + __attribute__((aligned(128))) __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };#if PT_NLEVELS ==3
@@ -57,11 +57,11 @@ union thread_union init_thread_union* guarantee that global objects will be laid out in memory in the same order * as the order of declaration, so put these in different sections and use * the linker script to order them. */ -pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE))); +pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data..vm0.pmd"), aligned(PAGE_SIZE)));#endif -pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE))); -pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE))); +pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data..vm0.pgd"), aligned(PAGE_SIZE))); +pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pte"), aligned(PAGE_SIZE)));/* * Initial task structure.
arch/parisc/kernel/vmlinux.lds.S +13 -13
@@ -94,8 +94,8 @@ SECTIONS /* rarely changed data like cpu maps */ . = ALIGN(16); - .data.read_mostly : { - *(.data.read_mostly) + .data..read_mostly : { + *(.data..read_mostly) } . = ALIGN(L1_CACHE_BYTES);
@@ -106,14 +106,14 @@ SECTIONS } . = ALIGN(L1_CACHE_BYTES); - .data.cacheline_aligned : { - *(.data.cacheline_aligned) + .data..cacheline_aligned : { + *(.data..cacheline_aligned) } /* PA-RISC locks requires 16-byte alignment */ . = ALIGN(16); - .data.lock_aligned : { - *(.data.lock_aligned) + .data..lock_aligned : { + *(.data..lock_aligned) } /* nosave data is really only used for software suspend...it's here
@@ -122,7 +122,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); __nosave_begin = .; .data_nosave : { - *(.data.nosave) + *(.data..nosave) } . = ALIGN(PAGE_SIZE); __nosave_end = .;
@@ -134,10 +134,10 @@ SECTIONS __bss_start = .; /* page table entries need to be PAGE_SIZE aligned */ . = ALIGN(PAGE_SIZE); - .data.vmpages : { - *(.data.vm0.pmd) - *(.data.vm0.pgd) - *(.data.vm0.pte) + .data..vmpages : { + *(.data..vm0.pmd) + *(.data..vm0.pgd) + *(.data..vm0.pte) } .bss : { *(.bss)
@@ -149,8 +149,8 @@ SECTIONS /* assembler code expects init_task to be 16k aligned */ . = ALIGN(16384); /* init_task */ - .data.init_task : { - *(.data.init_task) + .data..init_task : { + *(.data..init_task) } #ifdef CONFIG_64BIT
arch/powerpc/include/asm/cache.h +1 -1
@@ -38,7 +38,7 @@ extern struct ppc64_caches ppc64_caches;#endif /* __powerpc64__ && ! __ASSEMBLY__ */ #if !defined(__ASSEMBLY__) -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly")))#endif #endif /* __KERNEL__ */
arch/powerpc/include/asm/page_64.h +1 -1
@@ -157,7 +157,7 @@ do { \#else #define __page_aligned \ __attribute__((__aligned__(PAGE_SIZE), \ - __section__(".data.page_aligned"))) + __section__(".data..page_aligned")))#endif #define VM_DATA_DEFAULT_FLAGS \
arch/powerpc/include/asm/ppc_asm.h +2 -2
@@ -193,7 +193,7 @@ name: \ GLUE(.,name):#define _INIT_GLOBAL (name) \ - .section ".text.init.refok"; \ + .section ".text..init.refok"; \ .align 2 ; \ .globl name; \ .globl GLUE(.,name); \
@@ -233,7 +233,7 @@ name: \ GLUE(.,name):#define _INIT_STATIC (name) \ - .section ".text.init.refok"; \ + .section ".text..init.refok"; \ .align 2 ; \ .section ".opd","aw"; \ name: \
arch/powerpc/kernel/head_32.S +1 -1
@@ -50,7 +50,7 @@ mtspr SPRN_DBAT##n##L,RB; \ 1: - .section .text.head, "ax" + .section .text..head, "ax" .stabs "arch/powerpc/kernel/",N_SO,0,0,0f .stabs "head_32.S",N_SO,0,0,0f 0:
arch/powerpc/kernel/head_40x.S +1 -1
@@ -52,7 +52,7 @@ * * This is all going to change RSN when we add bi_recs....... -- Dan */ - .section .text.head, "ax" + .section .text..head, "ax" _ENTRY(_stext); _ENTRY(_start);
arch/powerpc/kernel/head_44x.S +1 -1
@@ -50,7 +50,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + .section .text..head, "ax" _ENTRY(_stext); _ENTRY(_start); /*
arch/powerpc/kernel/head_8xx.S +1 -1
@@ -38,7 +38,7 @@ #else #define DO_8xx_CPU6(val, reg) #endif - .section .text.head, "ax" + .section .text..head, "ax" _ENTRY(_stext); _ENTRY(_start);
arch/powerpc/kernel/head_fsl_booke.S +1 -1
@@ -53,7 +53,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + .section .text..head, "ax" _ENTRY(_stext); _ENTRY(_start); /*
arch/powerpc/kernel/init_task.c +1 -1
@@ -21,7 +21,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/powerpc/kernel/machine_kexec_64.c +1 -1
@@ -250,7 +250,7 @@ static void kexec_prepare_cpus(void)* current, but that audit has not been performed. */ static union thread_union kexec_stack - __attribute__((__section__(".data.init_task"))) = { }; + __attribute__((__section__(".data..init_task"))) = { };/* Our assembly helper, in kexec_stub.S */ extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
arch/powerpc/kernel/vdso.c +1 -1
@@ -74,7 +74,7 @@ static int vdso_ready;static union {struct vdso_data data;u8 page[PAGE_SIZE ]; -} vdso_data_store __attribute__((__section__(".data.page_aligned"))); +} vdso_data_store __attribute__((__section__(".data..page_aligned")));struct vdso_data *vdso_data = &vdso_data_store.data;/* Format of the patch table */
arch/powerpc/kernel/vdso32/vdso32_wrapper.S +1 -1
@@ -1,7 +1,7 @@ #include <linux/init.h> #include <asm/page.h> - .section ".data.page_aligned" + .section ".data..page_aligned" .globl vdso32_start, vdso32_end .balign PAGE_SIZE
arch/powerpc/kernel/vdso64/vdso64_wrapper.S +1 -1
@@ -1,7 +1,7 @@ #include <linux/init.h> #include <asm/page.h> - .section ".data.page_aligned" + .section ".data..page_aligned" .globl vdso64_start, vdso64_end .balign PAGE_SIZE
arch/powerpc/kernel/vmlinux.lds.S +14 -14
@@ -52,9 +52,9 @@ SECTIONS /* Text and gots */ .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); - *(.text.head) + *(.text..head) _text = .; - *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) + *(.text .fixup .text..init.refok .text..exit.refok __ftr_alt_*) SCHED_TEXT LOCK_TEXT KPROBES_TEXT
@@ -182,10 +182,10 @@ SECTIONS } #endif . = ALIGN(PAGE_SIZE); - .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { + .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { __per_cpu_start = .; - *(.data.percpu) - *(.data.percpu.shared_aligned) + *(.data..percpu) + *(.data..percpu.shared_aligned) __per_cpu_end = .; }
@@ -259,28 +259,28 @@ SECTIONS #else . = ALIGN(16384); #endif - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) + .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { + *(.data..init_task) } . = ALIGN(PAGE_SIZE); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) + .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) { + *(.data..page_aligned) } - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) + .data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) { + *(.data..cacheline_aligned) } . = ALIGN(L1_CACHE_BYTES); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) + .data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) { + *(.data..read_mostly) } . = ALIGN(PAGE_SIZE); .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { __nosave_begin = .; - *(.data.nosave) + *(.data..nosave) . = ALIGN(PAGE_SIZE); __nosave_end = .; }
arch/s390/include/asm/cache.h +1 -1
@@ -14,6 +14,6 @@#define L1_CACHE_BYTES 256#define L1_CACHE_SHIFT 8 -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly")))#endif
arch/s390/kernel/head.S +1 -1
@@ -35,7 +35,7 @@ #define ARCH_OFFSET 0 #endif -.section ".text.head","ax" +.section ".text..head","ax" #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW
arch/s390/kernel/init_task.c +1 -1
@@ -30,7 +30,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/s390/kernel/vdso.c +1 -1
@@ -64,7 +64,7 @@ __setup("vdso=", vdso_setup);static union {struct vdso_data data;u8 page[PAGE_SIZE ]; -} vdso_data_store __attribute__((__section__(".data.page_aligned"))); +} vdso_data_store __attribute__((__section__(".data..page_aligned")));struct vdso_data *vdso_data = &vdso_data_store.data;/*
arch/s390/kernel/vdso32/vdso32_wrapper.S +1 -1
@@ -1,7 +1,7 @@ #include <linux/init.h> #include <asm/page.h> - .section ".data.page_aligned" + .section ".data..page_aligned" .globl vdso32_start, vdso32_end .balign PAGE_SIZE
arch/s390/kernel/vdso64/vdso64_wrapper.S +1 -1
@@ -1,7 +1,7 @@ #include <linux/init.h> #include <asm/page.h> - .section ".data.page_aligned" + .section ".data..page_aligned" .globl vdso64_start, vdso64_end .balign PAGE_SIZE
arch/s390/kernel/vmlinux.lds.S +10 -10
@@ -29,7 +29,7 @@ SECTIONS . = 0x00000000; .text : { _text = .; /* Text and read-only data */ - *(.text.head) + *(.text..head) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -66,30 +66,30 @@ SECTIONS . = ALIGN(PAGE_SIZE); .data_nosave : { __nosave_begin = .; - *(.data.nosave) + *(.data..nosave) } . = ALIGN(PAGE_SIZE); __nosave_end = .; . = ALIGN(PAGE_SIZE); - .data.page_aligned : { - *(.data.idt) + .data..page_aligned : { + *(.data..idt) } . = ALIGN(0x100); - .data.cacheline_aligned : { - *(.data.cacheline_aligned) + .data..cacheline_aligned : { + *(.data..cacheline_aligned) } . = ALIGN(0x100); - .data.read_mostly : { - *(.data.read_mostly) + .data..read_mostly : { + *(.data..read_mostly) } _edata = .; /* End of data section */ . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : { - *(.data.init_task) + .data..init_task : { + *(.data..init_task) } /* will be freed after init */
arch/sh/include/asm/cache.h +1 -1
@@ -14,7 +14,7 @@#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly")))#ifndef __ASSEMBLY__ struct cache_info {
arch/sh/kernel/cpu/sh5/entry.S +2 -2
@@ -2058,10 +2058,10 @@ asm_uaccess_end: /* - * --- .text.init Section + * --- .text..init Section */ - .section .text.init, "ax" + .section .text..init, "ax" /* * void trap_init (void)
arch/sh/kernel/head_32.S +1 -1
@@ -40,7 +40,7 @@ ENTRY(empty_zero_page) 1: .skip PAGE_SIZE - empty_zero_page - 1b - .section .text.head, "ax" + .section .text..head, "ax" /* * Condition at the entry of _stext:
arch/sh/kernel/head_64.S +1 -1
@@ -110,7 +110,7 @@ empty_bad_pte_table: fpu_in_use: .quad 0 - .section .text.head, "ax" + .section .text..head, "ax" .balign L1_CACHE_BYTES /* * Condition at the entry of __stext:
arch/sh/kernel/init_task.c +1 -1
@@ -21,7 +21,7 @@ EXPORT_SYMBOL(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
arch/sh/kernel/irq.c +2 -2
@@ -158,10 +158,10 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)#ifdef CONFIG_IRQSTACKS static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); + __attribute__((__section__(".bss..page_aligned"))); static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); + __attribute__((__section__(".bss..page_aligned")));/* * allocate per-cpu stacks for hardirq and for softirq processing
arch/sh/kernel/vmlinux_32.lds.S +7 -7
@@ -28,7 +28,7 @@ SECTIONS } = 0 .text : { - *(.text.head) + *(.text..head) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -58,19 +58,19 @@ SECTIONS . = ALIGN(THREAD_SIZE); .data : { /* Data */ - *(.data.init_task) + *(.data..init_task) . = ALIGN(L1_CACHE_BYTES); - *(.data.cacheline_aligned) + *(.data..cacheline_aligned) . = ALIGN(L1_CACHE_BYTES); - *(.data.read_mostly) + *(.data..read_mostly) . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) + *(.data..page_aligned) __nosave_begin = .; - *(.data.nosave) + *(.data..nosave) . = ALIGN(PAGE_SIZE); __nosave_end = .;
@@ -128,7 +128,7 @@ SECTIONS .bss : { __init_end = .; __bss_start = .; /* BSS */ - *(.bss.page_aligned) + *(.bss..page_aligned) *(.bss) *(COMMON) . = ALIGN(4);
arch/sh/kernel/vmlinux_64.lds.S +7 -7
@@ -42,7 +42,7 @@ SECTIONS } = 0 .text : C_PHYS(.text) { - *(.text.head) + *(.text..head) TEXT_TEXT *(.text64) *(.text..SHmedia32)
@@ -70,19 +70,19 @@ SECTIONS . = ALIGN(THREAD_SIZE); .data : C_PHYS(.data) { /* Data */ - *(.data.init_task) + *(.data..init_task) . = ALIGN(L1_CACHE_BYTES); - *(.data.cacheline_aligned) + *(.data..cacheline_aligned) . = ALIGN(L1_CACHE_BYTES); - *(.data.read_mostly) + *(.data..read_mostly) . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) + *(.data..page_aligned) __nosave_begin = .; - *(.data.nosave) + *(.data..nosave) . = ALIGN(PAGE_SIZE); __nosave_end = .;
@@ -140,7 +140,7 @@ SECTIONS .bss : C_PHYS(.bss) { __init_end = .; __bss_start = .; /* BSS */ - *(.bss.page_aligned) + *(.bss..page_aligned) *(.bss) *(COMMON) . = ALIGN(4);
arch/sparc/boot/btfixupprep.c +2 -2
@@ -171,7 +171,7 @@ main1: } }else if (buffer[nbase+4 ] !='_' )continue ; -if (!strcmp (sect,".text.exit" )) +if (!strcmp (sect,".text..exit" ))continue ; if (strcmp (sect, ".text") && strcmp (sect, ".init.text") &&
@@ -325,7 +325,7 @@ main1: (*rr)->next =NULL ; }printf ("! Generated by btfixupprep. Do not edit.\n\n" ); -printf ("\t.section\t\".data.init\",#alloc,#write\n\t.align\t4\n\n" ); +printf ("\t.section\t\".data..init\",#alloc,#write\n\t.align\t4\n\n" );printf ("\t.global\t___btfixup_start\n___btfixup_start:\n\n" );for (i =0 ; i < last; i++) { f = array + i;
arch/sparc/include/asm/cache.h +1 -1
@@ -19,7 +19,7 @@#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT) -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly")))#ifdef CONFIG_SPARC32 #include <asm/asi.h>
arch/sparc/kernel/head_32.S +2 -2
@@ -72,7 +72,7 @@ sun4e_notsup: .align 4 /* The Sparc trap table, bootloader gives us control at _start. */ - .section .text.head,"ax" + .section .text..head,"ax" .globl start, _stext, _start, __stext .globl trapbase _start: /* danger danger */
@@ -735,7 +735,7 @@ go_to_highmem: nop /* The code above should be at beginning and we have to take care about - * short jumps, as branching to .text.init section from .text is usually + * short jumps, as branching to .text..init section from .text is usually * impossible */ __INIT /* Acquire boot time privileged register values, this will help debugging.
arch/sparc/kernel/head_64.S +1 -1
@@ -467,7 +467,7 @@ jump_to_sun4u_init: jmpl %g2 + %g0, %g0 nop - .section .text.init.refok + .section .text..init.refok sun4u_init: BRANCH_IF_SUN4V(g1, sun4v_init)
arch/sparc/kernel/init_task.c +1 -1
@@ -22,5 +22,5 @@ EXPORT_SYMBOL(init_task);* in etrap.S which assumes it. */ union thread_union init_thread_union - __attribute__((section (".data.init_task"))) + __attribute__((section (".data..init_task"))) = { INIT_THREAD_INFO(init_task) };
arch/sparc/kernel/vmlinux.lds.S +7 -7
@@ -41,7 +41,7 @@ SECTIONS .text TEXTSTART : { _text = .; - *(.text.head) + *(.text..head) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -59,20 +59,20 @@ SECTIONS *(.data1) } . = ALIGN(SMP_CACHE_BYTES); - .data.cacheline_aligned : { - *(.data.cacheline_aligned) + .data..cacheline_aligned : { + *(.data..cacheline_aligned) } . = ALIGN(SMP_CACHE_BYTES); - .data.read_mostly : { - *(.data.read_mostly) + .data..read_mostly : { + *(.data..read_mostly) } /* End of data section */ _edata = .; /* init_task */ . = ALIGN(THREAD_SIZE); - .data.init_task : { - *(.data.init_task) + .data..init_task : { + *(.data..init_task) } .fixup : { __start___fixup = .;
arch/um/include/asm/common.lds.S +2 -2
@@ -49,9 +49,9 @@ } . = ALIGN(32); - .data.percpu : { + .data..percpu : { __per_cpu_start = . ; - *(.data.percpu) + *(.data..percpu) __per_cpu_end = . ; }
arch/um/kernel/dyn.lds.S +2 -2
@@ -97,9 +97,9 @@ SECTIONS .fini_array : { *(.fini_array) } .data : { . = ALIGN(KERNEL_STACK_SIZE); /* init_task */ - *(.data.init_task) + *(.data..init_task) . = ALIGN(KERNEL_STACK_SIZE); - *(.data.init_irqstack) + *(.data..init_irqstack) DATA_DATA *(.data.* .gnu.linkonce.d.*) SORT(CONSTRUCTORS)
arch/um/kernel/init_task.c +2 -2
@@ -34,9 +34,9 @@ EXPORT_SYMBOL(init_task);*/ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) }; union thread_union cpu0_irqstack - __attribute__((__section__(".data.init_irqstack"))) = + __attribute__((__section__(".data..init_irqstack"))) = { INIT_THREAD_INFO(init_task) };
arch/um/kernel/uml.lds.S +2 -2
@@ -53,9 +53,9 @@ SECTIONS .data : { . = ALIGN(KERNEL_STACK_SIZE); /* init_task */ - *(.data.init_task) + *(.data..init_task) . = ALIGN(KERNEL_STACK_SIZE); - *(.data.init_irqstack) + *(.data..init_irqstack) DATA_DATA *(.gnu.linkonce.d*) CONSTRUCTORS
arch/x86/boot/compressed/head_32.S +1 -1
@@ -29,7 +29,7 @@ #include <asm/boot.h> #include <asm/asm-offsets.h> -.section ".text.head","ax",@progbits +.section ".text..head","ax",@progbits .globl startup_32 startup_32:
arch/x86/boot/compressed/head_64.S +1 -1
@@ -33,7 +33,7 @@ #include <asm/processor-flags.h> #include <asm/asm-offsets.h> -.section ".text.head" +.section ".text..head" .code32 .globl startup_32
arch/x86/boot/compressed/relocs.c +1 -1
@@ -559,7 +559,7 @@ static void emit_relocs(int as_text)/* Print the relocations in a form suitable that * gas will like. */ -printf (".section \".data.reloc\",\"a\"\n" ); +printf (".section \".data..reloc\",\"a\"\n" );printf (".balign 4\n" );for (i =0 ; i < reloc_count; i++) {printf ("\t .long 0x%08lx\n" , relocs[i]);
arch/x86/boot/compressed/vmlinux.scr +1 -1
@@ -1,6 +1,6 @@ SECTIONS { - .rodata.compressed : { + .rodata..compressed : { input_len = .; LONG(input_data_end - input_data) input_data = .; *(.data)
arch/x86/boot/compressed/vmlinux_32.lds +10 -4
@@ -7,13 +7,13 @@ SECTIONS * address 0. */ . = 0; - .text.head : { + .text..head : { _head = . ; - *(.text.head) + *(.text..head) _ehead = . ; } - .rodata.compressed : { - *(.rodata.compressed) + .rodata..compressed : { + *(.rodata..compressed) } .text : { _text = .; /* Text */
@@ -21,6 +21,10 @@ SECTIONS *(.text.*) _etext = . ; } + .got : { + *(.got) + *(.got.*) + } .rodata : { _rodata = . ; *(.rodata) /* read-only data */
@@ -40,4 +44,6 @@ SECTIONS *(COMMON) _end = . ; } + /* Be bold, and discard everything not explicitly mentioned */ + /DISCARD/ : { *(*) } }
arch/x86/boot/compressed/vmlinux_64.lds +6 -4
@@ -7,13 +7,13 @@ SECTIONS * address 0. */ . = 0; - .text.head : { + .text..head : { _head = . ; - *(.text.head) + *(.text..head) _ehead = . ; } - .rodata.compressed : { - *(.rodata.compressed) + .rodata..compressed : { + *(.rodata..compressed) } .text : { _text = .; /* Text */
@@ -45,4 +45,6 @@ SECTIONS . = . + 4096 * 6; _ebss = .; } + /* Be bold, and discard everything not explicitly mentioned */ + /DISCARD/ : { *(*) } }
arch/x86/include/asm/cache.h +2 -2
@@ -5,7 +5,7 @@#define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT)#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly")))#ifdef CONFIG_X86_VSMP /* vSMP Internode cacheline shift */
@@ -13,7 +13,7 @@#ifdef CONFIG_SMP #define __cacheline_aligned_in_smp \ __attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT)))) \ - __attribute__((__section__(".data.page_aligned"))) + __attribute__((__section__(".data..page_aligned")))#endif #endif
arch/x86/kernel/acpi/wakeup_32.S +1 -1
@@ -1,4 +1,4 @@ - .section .text.page_aligned + .section .text..page_aligned #include <linux/linkage.h> #include <asm/segment.h> #include <asm/page.h>
arch/x86/kernel/head_32.S +3 -3
@@ -81,7 +81,7 @@ INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_ * any particular GDT layout, because we load our own as soon as we * can. */ -.section .text.head,"ax",@progbits +.section .text..head,"ax",@progbits ENTRY(startup_32) /* test KEEP_SEGMENTS flag to see if the bootloader is asking us to not reload segments */
@@ -609,7 +609,7 @@ ENTRY(_stext) /* * BSS section */ -.section ".bss.page_aligned","wa" +.section ".bss..page_aligned","wa" .align PAGE_SIZE_asm #ifdef CONFIG_X86_PAE swapper_pg_pmd:
@@ -626,7 +626,7 @@ ENTRY(empty_zero_page) * This starts the data section. */ #ifdef CONFIG_X86_PAE -.section ".data.page_aligned","wa" +.section ".data..page_aligned","wa" /* Page-aligned for the benefit of paravirt? */ .align PAGE_SIZE_asm ENTRY(swapper_pg_dir)
arch/x86/kernel/head_64.S +2 -2
@@ -40,7 +40,7 @@ L4_START_KERNEL = pgd_index(__START_KERNEL_map) L3_START_KERNEL = pud_index(__START_KERNEL_map) .text - .section .text.head + .section .text..head .code64 .globl startup_64 startup_64:
@@ -414,7 +414,7 @@ ENTRY(phys_base) ENTRY(idt_table) .skip 256 * 16 - .section .bss.page_aligned, "aw", @nobits + .section .bss..page_aligned, "aw", @nobits .align PAGE_SIZE ENTRY(empty_zero_page) .skip PAGE_SIZE
arch/x86/kernel/init_task.c +2 -2
@@ -22,7 +22,7 @@ struct mm_struct init_mm = INIT_MM(init_mm);* "init_task" linker map entry.. */ union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };/*
@@ -36,7 +36,7 @@ EXPORT_SYMBOL(init_task);/* * per-CPU TSS segments. Threads are completely 'soft' on Linux, * no more per-task TSS's. The TSS size is kept cacheline-aligned -* so they are allowed to end up in the .data.cacheline_aligned +* so they are allowed to end up in the .data..cacheline_aligned * section. Since TSS's are completely CPU-local, we want them * on exact cacheline boundaries, to eliminate cacheline ping-pong. */
arch/x86/kernel/traps.c +1 -1
@@ -78,7 +78,7 @@ char ignore_fpu_irq;* for this. */ gate_desc idt_table[256] - __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, }; + __attribute__((__section__(".data..idt"))) = { { { { 0, 0 } } }, };#endif DECLARE_BITMAP (used_vectors,NR_VECTORS );
arch/x86/kernel/vmlinux_32.lds.S +18 -18
@@ -31,15 +31,15 @@ SECTIONS . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; phys_startup_32 = startup_32 - LOAD_OFFSET; - .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { + .text..head : AT(ADDR(.text..head) - LOAD_OFFSET) { _text = .; /* Text and read-only data */ - *(.text.head) + *(.text..head) } :text = 0x9090 /* read-only */ .text : AT(ADDR(.text) - LOAD_OFFSET) { . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */ - *(.text.page_aligned) + *(.text..page_aligned) TEXT_TEXT SCHED_TEXT LOCK_TEXT
@@ -71,32 +71,32 @@ SECTIONS . = ALIGN(PAGE_SIZE); .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { __nosave_begin = .; - *(.data.nosave) + *(.data..nosave) . = ALIGN(PAGE_SIZE); __nosave_end = .; } . = ALIGN(PAGE_SIZE); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) - *(.data.idt) + .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) { + *(.data..page_aligned) + *(.data..idt) } . = ALIGN(32); - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) + .data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) { + *(.data..cacheline_aligned) } /* rarely changed data like cpu maps */ . = ALIGN(32); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) + .data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) { + *(.data..read_mostly) _edata = .; /* End of data section */ } . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) + .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { + *(.data..init_task) } /* might get freed after init */
@@ -179,11 +179,11 @@ SECTIONS } #endif . = ALIGN(PAGE_SIZE); - .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { + .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { __per_cpu_start = .; - *(.data.percpu.page_aligned) - *(.data.percpu) - *(.data.percpu.shared_aligned) + *(.data..percpu.page_aligned) + *(.data..percpu) + *(.data..percpu.shared_aligned) __per_cpu_end = .; } . = ALIGN(PAGE_SIZE);
@@ -192,7 +192,7 @@ SECTIONS .bss : AT(ADDR(.bss) - LOAD_OFFSET) { __init_end = .; __bss_start = .; /* BSS */ - *(.bss.page_aligned) + *(.bss..page_aligned) *(.bss) . = ALIGN(4); __bss_stop = .;
arch/x86/kernel/vmlinux_64.lds.S +13 -13
@@ -28,7 +28,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : AT(ADDR(.text) - LOAD_OFFSET) { /* First the code that has to be first for bootstrapping */ - *(.text.head) + *(.text..head) _stext = .; /* Then the rest */ TEXT_TEXT
@@ -63,17 +63,17 @@ SECTIONS . = ALIGN(PAGE_SIZE); . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) + .data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) { + *(.data..cacheline_aligned) } . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) + .data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) { + *(.data..read_mostly) } #define VSYSCALL_ADDR (-10*1024*1024) -#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) -#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data..read_mostly) + SIZEOF(.data..read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_VIRT_ADDR ((ADDR(.data..read_mostly) + SIZEOF(.data..read_mostly) + 4095) & ~(4095)) #define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
@@ -122,13 +122,13 @@ SECTIONS #undef VVIRT . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) + .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { + *(.data..init_task) }:data.init . = ALIGN(PAGE_SIZE); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) + .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) { + *(.data..page_aligned) } /* might get freed after init */
@@ -215,13 +215,13 @@ SECTIONS . = ALIGN(PAGE_SIZE); __nosave_begin = .; - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) } + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data..nosave) } . = ALIGN(PAGE_SIZE); __nosave_end = .; __bss_start = .; /* BSS */ .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - *(.bss.page_aligned) + *(.bss..page_aligned) *(.bss) } __bss_stop = .;
arch/xtensa/kernel/head.S +1 -1
@@ -234,7 +234,7 @@ should_never_return: * BSS section */ -.section ".bss.page_aligned", "w" +.section ".bss..page_aligned", "w" ENTRY(swapper_pg_dir) .fill PAGE_SIZE, 1, 0 ENTRY(empty_zero_page)
arch/xtensa/kernel/init_task.c +1 -1
@@ -28,7 +28,7 @@ struct mm_struct init_mm = INIT_MM(init_mm);EXPORT_SYMBOL (init_mm); union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = + __attribute__((__section__(".data..init_task"))) = { INIT_THREAD_INFO(init_task) };struct task_struct init_task =INIT_TASK (init_task);
arch/xtensa/kernel/vmlinux.lds.S +3 -3
@@ -121,14 +121,14 @@ SECTIONS DATA_DATA CONSTRUCTORS . = ALIGN(XCHAL_ICACHE_LINESIZE); - *(.data.cacheline_aligned) + *(.data..cacheline_aligned) } _edata = .; /* The initial task */ . = ALIGN(8192); - .data.init_task : { *(.data.init_task) } + .data..init_task : { *(.data..init_task) } /* Initialization code and data: */
@@ -259,7 +259,7 @@ SECTIONS /* BSS section */ _bss_start = .; - .bss : { *(.bss.page_aligned) *(.bss) } + .bss : { *(.bss..page_aligned) *(.bss) } _bss_end = .; _end = .;
include/asm-frv/init.h +4 -4
@@ -1,12 +1,12 @@#ifndef _ASM_INIT_H#define _ASM_INIT_H -#define __init __attribute__ ((__section__ (".text.init"))) -#define __initdata __attribute__ ((__section__ (".data.init"))) +#define __init __attribute__ ((__section__ (".text..init"))) +#define __initdata __attribute__ ((__section__ (".data..init")))/* For assembly routines */ -#define __INIT .section ".text.init",#alloc,#execinstr +#define __INIT .section ".text..init",#alloc,#execinstr#define __FINIT .previous -#define __INITDATA .section ".data.init",#alloc,#write +#define __INITDATA .section ".data..init",#alloc,#write#endif
include/asm-generic/vmlinux.lds.h +7 -7
@@ -64,7 +64,7 @@/* .data section */ #define DATA_DATA \ *(.data) \ - *(.data.init.refok) \ + *(.data..init.refok) \ *(.ref.data) \ DEV_KEEP(init.data) \ DEV_KEEP(exit.data) \
@@ -255,8 +255,8 @@ *(.text.hot) \ *(.text) \ *(.ref.text) \ - *(.text.init.refok) \ - *(.exit.text.refok) \ + *(.text..init.refok) \ + *(.text..exit.refok) \ DEV_KEEP(init.text) \ DEV_KEEP(exit.text) \CPU_KEEP (init.text) \
@@ -433,9 +433,9 @@#define PERCPU (align) \ . = ALIGN(align); \ VMLINUX_SYMBOL(__per_cpu_start) = .; \ - .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \ - *(.data.percpu.page_aligned) \ - *(.data.percpu) \ - *(.data.percpu.shared_aligned) \ + .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \ + *(.data..percpu.page_aligned) \ + *(.data..percpu) \ + *(.data..percpu.shared_aligned) \ } \ VMLINUX_SYMBOL(__per_cpu_end) = .;
include/linux/cache.h +1 -1
@@ -31,7 +31,7 @@#ifndef __cacheline_aligned#define __cacheline_aligned \ __attribute__((__aligned__(SMP_CACHE_BYTES), \ - __section__(".data.cacheline_aligned"))) + __section__(".data..cacheline_aligned")))#endif /* __cacheline_aligned */ #ifndef __cacheline_aligned_in_smp
include/linux/init.h +4 -4
@@ -62,9 +62,9 @@/* backward compatibility note * A few places hardcode the old section names: -* .text.init.refok -* .data.init.refok -* .exit.text.refok +* .text..init.refok +* .data..init.refok +* .text..exit.refok * They should be converted to use the defines from this file */
@@ -301,7 +301,7 @@ void __init parse_early_param(void);#endif /* Data marked not to be saved by software suspend */ -#define __nosavedata __section(.data.nosave) +#define __nosavedata __section(.data..nosave)/* This means "can be init if no module support, otherwise module load may call it." */
include/linux/linkage.h +2 -2
@@ -18,8 +18,8 @@# define asmregparm#endif -#define __page_aligned_data __section(.data.page_aligned) __aligned(PAGE_SIZE) -#define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE) +#define __page_aligned_data __section(.data..page_aligned) __aligned(PAGE_SIZE) +#define __page_aligned_bss __section(.bss..page_aligned) __aligned(PAGE_SIZE)/* * This is used by architectures to keep arguments on the stack
include/linux/percpu.h +5 -5
@@ -10,13 +10,13 @@#ifdef CONFIG_SMP #define DEFINE_PER_CPU (type, name) \ - __attribute__((__section__(".data.percpu"))) \ + __attribute__((__section__(".data..percpu"))) \ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name#ifdef MODULE -#define SHARED_ALIGNED_SECTION ".data.percpu" +#define SHARED_ALIGNED_SECTION ".data..percpu"#else -#define SHARED_ALIGNED_SECTION ".data.percpu.shared_aligned" +#define SHARED_ALIGNED_SECTION ".data..percpu.shared_aligned"#endif #define DEFINE_PER_CPU_SHARED_ALIGNED (type, name) \
@@ -24,8 +24,8 @@ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name \ ____cacheline_aligned_in_smp -#define DEFINE_PER_CPU_PAGE_ALIGNED (type, name) \ - __attribute__((__section__(".data.percpu.page_aligned"))) \ +#define DEFINE_PER_CPU_PAGE_ALIGNED (type, name) \ + __attribute__((__section__(".data..percpu.page_aligned"))) \ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name#else #define DEFINE_PER_CPU (type, name) \
include/linux/spinlock.h +1 -1
@@ -60,7 +60,7 @@/* * Must define these before including other files, inline functions need them */ -#define LOCK_SECTION_NAME ".text.lock."KBUILD_BASENAME +#define LOCK_SECTION_NAME ".text..lock."KBUILD_BASENAME#define LOCK_SECTION_START (extra) \ ".subsection 1\n\t" \
kernel/module.c +1 -1
@@ -475,7 +475,7 @@ static unsigned int find_pcpusec(Elf_Ehdr *hdr,Elf_Shdr *sechdrs, const char *secstrings) { - return find_sec(hdr, sechdrs, secstrings, ".data.percpu"); + return find_sec(hdr, sechdrs, secstrings, ".data..percpu"); }static void percpu_modcopy (void *pcpudest,const void *from,unsigned long size)
scripts/mod/modpost.c +6 -6
@@ -794,9 +794,9 @@ static const char *data_sections[] = { DATA_SECTIONS, NULL };/* sections that may refer to an init/exit section with no warning */ static const char *initref_sections[] = { -".text.init.refok*" , -".exit.text.refok*" , -".data.init.refok*" , +".text..init.refok*" , +".text..exit.refok*" , +".data..init.refok*" ,NULL };
@@ -915,7 +915,7 @@ static int section_mismatch(const char *fromsec, const char *tosec)* Pattern 0: * Do not warn if funtion/data are marked with __init_refok/__initdata_refok. * The pattern is identified by: -* fromsec = .text.init.refok* | .data.init.refok* +* fromsec = .text..init.refok* | .data..init.refok* * * Pattern 1: * If a module parameter is declared __initdata and permissions=0
@@ -939,8 +939,8 @@ static int section_mismatch(const char *fromsec, const char *tosec)* *probe_one, *_console, *_timer * * Pattern 3: -* Whitelist all refereces from .text.head to .init.data -* Whitelist all refereces from .text.head to .init.text +* Whitelist all references from .text..head to .init.data +* Whitelist all references from .text..head to .init.text * * Pattern 4: * Some symbols belong to init section but still it is ok to reference
scripts/recordmcount.pl +3 -3
@@ -26,7 +26,7 @@ # which will also be the location of that section after final link. # e.g. # -# .section ".text.sched" +# .section ".text..sched" # .globl my_func # my_func: # [...]
@@ -39,7 +39,7 @@ # [...] # # Both relocation offsets for the mcounts in the above example will be -# offset from .text.sched. If we make another file called tmp.s with: +# offset from .text..sched. If we make another file called tmp.s with: # # .section __mcount_loc # .quad my_func + 0x5
@@ -51,7 +51,7 @@ # But this gets hard if my_func is not globl (a static function). # In such a case we have: # -# .section ".text.sched" +# .section ".text..sched" # my_func: # [...] # call mcount (offset: 0x5)
Signature · 1 line
1.6.1.3
PATCH v2 2/4 x86: Add an option to compile with -ffunction-sections -fdata-sections
From: Waseem Daher <[email protected]>
This patch makes it possible to link and boot an x86 kernel with -ffunction-sections and -fdata-sections enabled.
Modpost currently warns whenever it sees a section with a name matching [.][0-9]+$ because they are often caused by section flag mismatch errors. When compiling with -ffunction-sections -fdata-sections, gcc places various classes of local symbols in sections with names such as .rodata.__func__.12345, causing these warnings to be printed spuriously. The simplest fix is to disable the warning when CONFIG_FUNCTION_DATA_SECTIONS is enabled.
--- Makefile | 4 ++++ arch/x86/Kconfig | 1 + arch/x86/kernel/vmlinux_32.lds.S | 1 + arch/x86/kernel/vmlinux_64.lds.S | 1 + include/asm-generic/vmlinux.lds.h | 5 ++++- lib/Kconfig.debug | 18 ++++++++++++++++++ scripts/Makefile.modpost | 1 + scripts/mod/modpost.c | 10 ++++++++-- 8 files changed, 38 insertions(+), 3 deletions(-)
Makefile +4 -0
@@ -550,6 +550,10 @@ ifdef CONFIG_FUNCTION_TRACER KBUILD_CFLAGS += -pg endif +ifdef CONFIG_FUNCTION_DATA_SECTIONS +KBUILD_CFLAGS += -ffunction-sections -fdata-sections +endif + # We trigger additional mismatches with less inlining ifdef CONFIG_DEBUG_SECTION_MISMATCH KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
arch/x86/Kconfig +1 -0
@@ -28,6 +28,7 @@ config X86 select HAVE_KPROBES select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS + select HAVE_FUNCTION_DATA_SECTIONS select HAVE_KRETPROBES select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE
arch/x86/kernel/vmlinux_32.lds.S +1 -0
@@ -194,6 +194,7 @@ SECTIONS __bss_start = .; /* BSS */ *(.bss..page_aligned) *(.bss) + *(.bss.[A-Za-z$_]*) /* handle -fdata-sections */ . = ALIGN(4); __bss_stop = .; _end = . ;
arch/x86/kernel/vmlinux_64.lds.S +1 -0
@@ -223,6 +223,7 @@ SECTIONS .bss : AT(ADDR(.bss) - LOAD_OFFSET) { *(.bss..page_aligned) *(.bss) + *(.bss.[A-Za-z$_]*) /* handle -fdata-sections */ } __bss_stop = .;
include/asm-generic/vmlinux.lds.h +4 -1
@@ -64,6 +64,7 @@/* .data section */ #define DATA_DATA \ *(.data) \ + *(.data.[A-Za-z$_]*)/* handle -fdata-sections */ \ *(.data..init.refok) \ *(.ref.data) \DEV_KEEP (init.data) \
@@ -87,7 +88,8 @@ . = ALIGN((align)); \ .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_rodata) = .; \ - *(.rodata) *(.rodata.*) \ + *(.rodata) \ + *(.rodata.[A-Za-z$_]*) /* handle -fdata-sections */ \ *(__vermagic)/* Kernel version magic */ \ *(__markers_strings)/* Markers: strings */ \ *(__tracepoints_strings)/* Tracepoints: strings */ \
@@ -254,6 +256,7 @@ALIGN_FUNCTION (); \ *(.text.hot) \ *(.text) \ + *(.text.[A-Za-z$_]*) /* handle -ffunction-sections */\ *(.ref.text) \ *(.text..init.refok) \ *(.text..exit.refok) \
lib/Kconfig.debug +18 -0
@@ -591,6 +591,24 @@ config FRAME_POINTER larger and slower, but it gives very useful debugging information in case of kernel bugs. (precise oopses/stacktraces/warnings) +config HAVE_FUNCTION_DATA_SECTIONS + bool + +config FUNCTION_DATA_SECTIONS + bool "Compile with -ffunction-sections -fdata-sections" + depends on HAVE_FUNCTION_DATA_SECTIONS + depends on !FUNCTION_TRACER + help + If you say Y here the compiler will give each function + and data structure its own ELF section. + + This option conflicts with CONFIG_FUNCTION_TRACER, which + enables profiling code generation, because current GCC does + not support compiling with -ffunction-sections -pg (see + <http://gcc.gnu.org/ml/gcc-help/2008-11/msg00128.html>). + + If unsure, say N. + config BOOT_PRINTK_DELAY bool "Delay each boot printk message by N milliseconds" depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY
scripts/Makefile.modpost +1 -0
@@ -87,6 +87,7 @@ modpost = scripts/mod/modpost \ $(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S) \ $(if $(CONFIG_MARKERS),-K $(kernelmarkersfile)) \ $(if $(CONFIG_MARKERS),-M $(markersfile)) \ + $(if $(filter -ffunction-sections -fdata-sections,$(KBUILD_CFLAGS) $(CFLAGS_KERNEL)),-F) \ $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w) \ $(if $(cross_build),-c)
scripts/mod/modpost.c +8 -2
@@ -32,6 +32,8 @@ static int warn_unresolved = 0;/* How a symbol is exported */ static int sec_mismatch_count =0 ;static int sec_mismatch_verbose =1 ; +/* Are we using -ffunction-sections or -fdata-sections? */ +static int function_data_sections =0 ;enum export { export_plain, export_unused, export_gpl,
@@ -736,7 +738,8 @@ static int check_section(const char *modname, const char *sec)/* consume all digits */ while (*e && e != sec &&isdigit (*e)) e--; -if (*e =='.' && !strstr (sec,".linkonce" )) { +if (*e =='.' && !strstr (sec,".linkonce" ) && + !function_data_sections) {warn ("%s (%s): unexpected section name.\n" "The (.[number]+) following section name are " "ld generated and not expected.\n"
@@ -2063,7 +2066,7 @@ int main(int argc, char **argv)struct ext_sym_list *extsym_iter;struct ext_sym_list *extsym_start =NULL ; -while ((opt =getopt (argc, argv,"i:I:e:cmsSo:awM:K:" )) !=-1 ) { +while ((opt =getopt (argc, argv,"i:I:e:cFmsSo:awM:K:" )) !=-1 ) {switch (opt) {case 'i' : kernel_read = optarg;
@@ -2083,6 +2086,9 @@ int main(int argc, char **argv) extsym_iter->file = optarg; extsym_start = extsym_iter;break ; +case 'F' : + function_data_sections =1 ; +break ;case 'm' : modversions =1 ;break ;
Signature · 1 line
1.6.1.3
PATCH v2 3/4 Ksplice: Export symbols needed for Ksplice
Ksplice uses __module_address and __module_text_address to determine which module contains various addresses.
Ksplice uses __kernel_text_address to limit its check for trampolines (jump instructions inserted by Ksplice) to only text addresses.
Ksplice uses task_curr in order to confirm that no other tasks are executing during Ksplice's kernel stack check.
Ksplice uses find_bug and search_exception_tables as part of its conservative check that the user provided the correct source code for the running kernel.
--- kernel/extable.c | 3 +++ kernel/module.c | 2 ++ kernel/sched.c | 1 + lib/bug.c | 1 + 4 files changed, 7 insertions(+), 0 deletions(-)
kernel/extable.c +3 -0
@@ -40,6 +40,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr) e =search_module_extables (addr);return e; } +EXPORT_SYMBOL_GPL (search_exception_tables); __notrace_funcgraph int core_kernel_text(unsigned long addr) {
@@ -60,6 +61,7 @@ __notrace_funcgraph int __kernel_text_address(unsigned long addr)return 1 ;return is_module_text_address (addr); } +EXPORT_SYMBOL_GPL (__kernel_text_address);int kernel_text_address (unsigned long addr) {
@@ -83,3 +85,4 @@ int func_ptr_is_kernel_text(void *ptr)return 1 ;return is_module_text_address (addr); } +EXPORT_SYMBOL_GPL (kernel_text_address);
kernel/module.c +2 -0
@@ -2760,6 +2760,7 @@ __notrace_funcgraph struct module *__module_address(unsigned long addr)return mod;return NULL ; } +EXPORT_SYMBOL_GPL (__module_address);/* * is_module_text_address - is this address inside module code?
@@ -2798,6 +2799,7 @@ struct module *__module_text_address(unsigned long addr) }return mod; } +EXPORT_SYMBOL_GPL (__module_text_address);/* Don't grab lock, we're oopsing. */ void print_modules (void )
kernel/sched.c +1 -0
@@ -1801,6 +1801,7 @@ inline int task_curr(const struct task_struct *p) {return cpu_curr (task_cpu (p)) == p; } +EXPORT_SYMBOL_GPL (task_curr);static inline void __set_task_cpu (struct task_struct *p,unsigned int cpu) {
lib/bug.c +1 -0
@@ -124,6 +124,7 @@ const struct bug_entry *find_bug(unsigned long bugaddr)return module_find_bug (bugaddr); } +EXPORT_SYMBOL_GPL (find_bug);enum bug_trap_type report_bug (unsigned long bugaddr,struct pt_regs *regs) {
Signature · 1 line
1.6.1.3
PATCH v2 4/4 Ksplice: Support updating x86-32 and x86-64
From: Jeff Arnold <[email protected]>
Ksplice makes it possible to apply patches to the kernel without rebooting.
--- Documentation/ksplice.txt | 304 ++++ MAINTAINERS | 10 + arch/Kconfig | 14 + arch/x86/Kconfig | 1 + arch/x86/kernel/ksplice-arch.c | 96 ++ include/linux/kernel.h | 1 + include/linux/ksplice.h | 224 +++ kernel/Makefile | 3 + kernel/ksplice.c | 2995 ++++++++++++++++++++++++++++++++++++++++ kernel/panic.c | 1 + 10 files changed, 3649 insertions(+), 0 deletions(-) create mode 100644 Documentation/ksplice.txt create mode 100644 arch/x86/kernel/ksplice-arch.c create mode 100644 include/linux/ksplice.h create mode 100644 kernel/ksplice.c
Documentation/ksplice.txt new file +304 -0
@@ -0,0 +1,304 @@ +Ksplice +------- + +CONTENTS: + +1. Concepts: updates, module changes, target modules +2. What changes can Ksplice handle? +3. Dependency model +4. Locking model +5. altinstructions, smplocks, and parainstructions +6. sysfs interface +7. debugfs interface +8. Hooks for running custom code during the update process + +0. Design Description +--------------------- + +For a description of the Ksplice design, please see the Ksplice +technical overview document: <http://www.ksplice.com/doc/ksplice.pdf>. +For usage examples and the Ksplice man pages, please see +<http://www.ksplice.com>. + +The document below assumes familiarity with the Ksplice design and +describes notable implementation details and the interface between the +Ksplice kernel component and the Ksplice user space component. + +1. Concepts: updates, module changes, target modules +---------------------------------------------------- + +A Ksplice update (struct update) contains one or more Ksplice module +changes (struct ksplice_mod_change), one for each target kernel module +that should be changed by the update. ksplice_mod_changes are grouped +together into a Ksplice update in order to allow multiple modules to +be changed atomically. + +The contents of a Ksplice module change are documented via kernel-doc +in include/linux/ksplice.h. To construct a new Ksplice update to be +performed atomically, one needs to: + 1. Populate the fields of one or more ksplice_mod_change structures. + 2. Call the Ksplice function init_ksplice_mod_change() on each + ksplice_mod_change to register them with the Ksplice kernel + component. When init_ksplice_mod_change() is called on a + ksplice_mod_change, that ksplice_mod_change will be associated + with the other ksplice_mod_changes that share the same Ksplice + identifier (KID) field. + 3. After all of the mod_changes intended for a particular Ksplice + update have been loaded, that update can be applied via the sysfs + interface (described in Section 7 below). + +Each ksplice_mod_change has a two modules associated with it: an +old_code module and a new_code module. + +A ksplice_mod_change's "old_code" module contains materials needed +only for preparing the update. Specifically, the old_code module +contains a copy of the pre-patch version of each of the compilation +units changed by the ksplice_mod_change. The old_code module can be +unloaded after the update has been applied in order to save memory. + +The ksplice_mod_change's "new_code" module contains the new sections +to be inserted by the update; it needs to remain loaded for as long as +the update is applied. + +Here's an example: + +Let's say that the Ksplice user space component wants to update the +core kernel and the isdn module. The user space component will select +a KID for this update (let's say 123abc) and generate four modules: + +ksplice_123abc_vmlinux_new (the new_code module for the vmlinux module change) +ksplice_123abc_vmlinux_old (the old_code module for the vmlinux module change) +ksplice_123abc_isdn_new (the new_code module for the isdn module change) +ksplice_123abc_isdn_old (the old_code module for the isdn module change) + +Once both of the vmlinux modules have been loaded, one of the modules +calls init_ksplice_mod_change on a ksplice_mod_change corresponding to +the desired vmlinux changes. + +Similarly, once both of the isdn modules have been loaded, one of the +modules calls init_ksplice_mod_change on a ksplice_mod_change +corresponding to the desired isdn changes. + +Once all modules are loaded (in this example, four modules), the +update can be applied atomically using the Ksplice sysfs interface. + +2. What changes can Ksplice handle? +----------------------------------- + +The Ksplice user space component takes a source code patch and uses it +to construct appropriate ksplice_mod_changes for an update. Ksplice +can handle source code patches that add new functions, modify the text +or arguments of existing functions, delete functions, move functions +between compilation units, change functions from local to global (or +vice versa), add exported symbols, rename exported symbols, and delete +exported symbols. Ksplice can handle patches that modify either C +code or assembly code. + +As described in the Ksplice technical overview document, a programmer +needs to write some new code in order for Ksplice to apply a patch +that makes semantic changes to kernel data structures. Some other +limitations also apply: + +Ksplice does not support changes to __init functions that been +unloaded from kernel memory. Ksplice also does not support changes to +functions in .exit.text sections since Ksplice currently requires that +all Ksplice updates affecting a module be reversed before that module +can be unloaded. + +The Ksplice user space implementation does not currently support +changes to weak symbols and changes to global read-only data +structures (changes to read-only data structures that are local to a +compilation unit are fine). + +Exported symbols: + +Ksplice can handle arbitrary changes to exported symbols in the source +code patch. + +Ksplice deletes exported symbols by looking up the relevant struct +kernel_symbol in the kernel's exported symbol table and replacing the +name field with a pointer to a string that begins with DISABLED. + +Ksplice adds new exported symbols through the same mechanism; the +relevant new_code module will have a ksymtab entry containing a symbol +with a name beginning with DISABLED, and Ksplice will replace that +with the name of the symbol to be exported when the update is +atomically applied. + +Because the struct kernel_symbol for a newly exported symbol is +contained in the Ksplice new_Code module, if a module using one of the +newly exported symbols is loaded, that module will correctly depend on +the Ksplice new_code module that exported the symbol. + +3. Dependency model +------------------- + +Because Ksplice resolves symbols used in the post code using Ksplice +relocations, Ksplice must enforce additional dependencies. Ksplice +uses the use_module function to directly add dependencies on all the +modules that the post code references. + +4. Locking model +---------------- + +From a locking perspective, Ksplice treats applying or removing a +Ksplice update as analogous to loading or unloading a new version of +the kernel modules patched by the update. Ksplice uses module_mutex +to protect against a variety of race conditions related to modules +being loaded or unloaded while Ksplice is applying or reversing an +update; this approach also protects against race conditions involving +multiple Ksplice updates being loaded or unloaded simultaneously as +well. + +5. altinstructions, smplocks, and parainstructions +-------------------------------------------------- + +There are currently several mechanisms through which the Linux kernel +will modify executable code at runtime. + +These mechanisms sometimes overwrite the storage unit of a relocation, +which would cause problems if not handled properly by Ksplice. + +Ksplice solves this problem by writing "canary" bytes (e.g., +0x77777777) in the storage unit of the relocation in user space. +Ksplice then checks whether the canary has been overwritten before +using a Ksplice relocation to detect symbol values or to write a value +to the storage unit of a Ksplice relocation. + +6. sysfs interface +------------------ + +Ksplice exports four sysfs files per Ksplice update in order to +communicate with user space. For each update, these four files are +located in a directory of the form /sys/kernel/ksplice/$kid, with $kid +replaced by the KID of the Ksplice update. + +A. /sys/kernel/ksplice/$kid/stage (mode 0600) + +This file contains one of three strings: +preparing: Indicates that this update has not yet been applied +applied: Indicates that this update has been applied and has not been reversed +reversed: Indicates that this update has been reversed + +When the stage is "preparing", the superuser can write "applied" to +the stage file in order to instruct Ksplice to apply the update. When +the stage is "applied", the superuser can write "reversed" to the +stage file in order to instruct Ksplice to reverse the update. +Afterwards, the superuser can write "cleanup" to the stage file in +order to instruct Ksplice to clean up the debugging information and +sysfs directory associated with the reversed update. Once an update +is reversed, it cannot be re-applied without first cleaning up the +update. + +B. /sys/kernel/ksplice/$kid/debug (mode 0600) + +The file contains a single number: 1 if debugging is enabled for this +Ksplice update and 0 otherwise. + +The superuser can write a new value to this file to enable or disable +debugging. + +C. /sys/kernel/ksplice/$kid/partial (mode 0600) + +The file contains a single number: 1 if the update should be applied +even if some of the target modules are not loaded and 0 otherwise. + +D. /sys/kernel/ksplice/$kid/abort_cause (mode 0400) + +This file contains a value indicating either 1) that Ksplice +successfully completed the most recently requested stage transition or +2) why Ksplice aborted the most recently requested stage transition. + +Each abort_code string is described below, along with the stage +transitions that might potentially trigger each possible abort code. +The stage transitions are abbreviated as follows: preparing->applied +(P->A), applied->reversed (A->R). + +ok (P->A, A->R): The most recent stage transition succeeded. + +no_match (P->A): Ksplice aborted the update because Ksplice was unable +to match the old_code module's object code against the running +kernel's object code. + +failed_to_find (P->A): Ksplice aborted the update because Ksplice was +unable to resolve some of the symbols used in the update. + +missing_export (P->A): Ksplice aborted the update because the symbols +exported by the kernel did not match Ksplice's expectations. + +already_reversed (P->A): Ksplice aborted the update because once an +update has been reversed, it cannot be applied again (without first +being cleaned up and reinitialized). + +module_busy (A->R): Ksplice aborted the undo operation because the +target Ksplice update is in use by another kernel module; +specifically, either the target Ksplice update exports a symbol that +is in use by another module or another Ksplice update depends on this +Ksplice update. + +out_of_memory (P->A, A->R): Ksplice aborted the operation because a call to +kmalloc or vmalloc failed. + +code_busy (P->A, A->R): Ksplice aborted the operation because Ksplice +was unable to find a moment when one or more of the to-be-patched +functions was not a thread's kernel stack. + +target_not_loaded (P->A): Ksplice aborted the update because one of +the target modules is not loaded and the partial option +(/sys/kernel/ksplice/$kid/partial) is not enabled. + +call_failed (P->A, A->R): One of the calls included as part of this +update returned nonzero exit status. + +unexpected_running_task (P->A, A->R): Ksplice aborted the operation +because Ksplice observed a running task during the kernel stack check, +at a time when Ksplice expected all tasks to be stopped by +stop_machine. + +unexpected (P->A, A->R): Ksplice aborted the operation because it +encountered an unspecified internal error. This condition can only be +caused by an invalid input to Ksplice or a bug in Ksplice. + +E. /sys/kernel/ksplice/$kid/conflicts (mode 0400) + +This file is empty until Ksplice aborts an operation because of a +code_busy condition (see "abort_code" above). This conflicts file +then contains information about the process(es) that caused the stack +check failure. + +Specifically, each line of this file consists of three space-separated +values, describing a single conflict: + +$program_name $program_pid $conflict_label + +$program_name is the name of the program with the conflict. +$program_pid is the pid of the program with the conflict. +$conflict_label is the Ksplice label of the function with the conflict. + +7. debugfs interface +-------------------- + +Ksplice exports a single file to debugfs for each Ksplice update. The +file has a name of the form ksplice_KID, where KID is the unique +identifier of the Ksplice update. It contains debugging information +in a human-readable format. + +8. Hooks for running custom code during the update process +---------------------------------------------------------- + +Ksplice allows a programmer to write custom code to be called from +within the kernel during the update process. The kernel component +allows custom code to be executed at the following times: + +- pre_apply: Called before the update has been applied and before the +machine has been stopped. Allowed to fail. +- check_apply: Called before the update has been applied but after the +machine has been stopped. Allowed to fail. +- apply: Called when the update is definitely going to be applied and +when the machine is stopped. Not allowed to fail. +- post_apply: Called when the update has been applied and the machine +is no longer stopped. Not allowed to fail. +- fail_apply: Called when the update failed to apply and the machine +is no longer stopped. Not allowed to fail. + +Ksplice also provides analagous xxx_reverse hooks.
MAINTAINERS +10 -0
@@ -2636,6 +2636,16 @@ W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained +KSPLICE +P: Jeff Arnold +M: [email protected] +P: Anders Kaseorg +M: [email protected] +P: Tim Abbott +M: [email protected] +W: http://www.ksplice.com +S: Supported + LAPB module L: [email protected] S: Orphan
arch/Kconfig +14 -0
@@ -43,6 +43,17 @@ config KPROBES for kernel debugging, non-intrusive instrumentation and testing. If in doubt, say "N". +config KSPLICE + tristate "Ksplice rebootless kernel updates" + depends on KALLSYMS_ALL && MODULE_UNLOAD && SYSFS && \ + FUNCTION_DATA_SECTIONS + depends on HAVE_KSPLICE + help + Say Y here if you want to be able to apply certain kinds of + patches to your running kernel, without rebooting. + + If unsure, say N. + config HAVE_EFFICIENT_UNALIGNED_ACCESS bool help
@@ -75,6 +86,9 @@ config HAVE_IOREMAP_PROT config HAVE_KPROBES bool +config HAVE_KSPLICE + def_bool n + config HAVE_KRETPROBES bool
arch/x86/Kconfig +1 -0
@@ -26,6 +26,7 @@ config X86 select HAVE_OPROFILE select HAVE_IOREMAP_PROT select HAVE_KPROBES + select HAVE_KSPLICE select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS select HAVE_FUNCTION_DATA_SECTIONS
arch/x86/kernel/ksplice-arch.c new file +96 -0
96 lines not on this page · raw message
include/linux/kernel.h +1 -0
@@ -307,6 +307,7 @@ extern enum system_states {#define TAINT_OVERRIDDEN_ACPI_TABLE 8#define TAINT_WARN 9#define TAINT_CRAP 10 +#define TAINT_KSPLICE 11extern void dump_stack (void )__cold ;
include/linux/ksplice.h new file +224 -0
224 lines not on this page · raw message
kernel/Makefile +3 -0
@@ -12,6 +12,8 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ async.o +CFLAGS_ksplice.o += -Iarch/$(SRCARCH)/kernel + ifdef CONFIG_FUNCTION_TRACER # Do not trace debug files and internal ftrace files CFLAGS_REMOVE_lockdep.o = -pg
@@ -71,6 +73,7 @@ obj-$(CONFIG_AUDIT) += audit.o auditfilter.o obj-$(CONFIG_AUDITSYSCALL) += auditsc.o obj-$(CONFIG_AUDIT_TREE) += audit_tree.o obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_KSPLICE) += ksplice.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
kernel/ksplice.c new file +2995 -0
2,305 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.6.1.3
Part of the diff is not shown here. View the raw message.
H. Peter Anvin
reviewerRe: [PATCH v2 2/4] x86: Add an option to compile with -ffunction-sections -fdata-sections
In reply to Tim AbbottQuoted 5 lines · Tim Abbott
From: Waseem Daher <[email protected]>
This patch makes it possible to link and boot an x86 kernel with -ffunction-sections and -fdata-sections enabled.
Quoted 8 lines
Modpost currently warns whenever it sees a section with a name matching [.][0-9]+$ because they are often caused by section flag mismatch errors. When compiling with -ffunction-sections -fdata-sections, gcc places various classes of local symbols in sections with names such as .rodata.__func__.12345, causing these warnings to be printed spuriously. The simplest fix is to disable the warning when
CONFIG_FUNCTION_DATA_SECTIONSis enabled.
This is a pretty critical set of warnings, that often represent real bugs. I don't think it's acceptable to lose them. However, you already have (prior in the sequence) changed those section names to not conflict with the automatically generated ones, so it seems to me that this should be fixable without too much pain.
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.
PATCH 1/1 modpost: Check the section flags, not name, to catch missing "ax"/"aw"
Quoted 5 lines · H. Peter Anvin
This is a pretty critical set of warnings, that often represent real bugs. I don't think it's acceptable to lose them. However, you already have (prior in the sequence) changed those section names to not conflict with the automatically generated ones, so it seems to me that this should be fixable without too much pain.
Actually, the problem arises from a conflict between two classes of automatically generated section names, one from ld, and one from gcc. Instead of basing the warning on section names (the existing heuristic also fails to warn on some cases where it should, as it turns out), what do you think about this patch? I've tested that it still triggers the warning when an "ax" or "aw" is incorrectly removed, and it should handle even more cases than before.
Anders
[PATCH] modpost: Check the section flags, not name, to catch missing "ax"/"aw"
When you put
.section ".foo"
in an assembly file instead of
.section "foo", "ax"
, one of the possible symptoms is that modpost will see an ld-generated section name ".foo.1" in section_rel() or section_rela(). But this heuristic has two problems: it will miss a bad section that has no relocations, and it will incorrectly flag many gcc-generated sections as bad when compiling with -ffunction-sections -fdata-sections.
So instead of checking whether the section name matches a particular pattern, we directly check for a missing SHF_ALLOC in the section flags.
--- scripts/mod/modpost.c | 49 ++++++++++++++++++------------------------------- 1 files changed, 18 insertions(+), 31 deletions(-)
scripts/mod/modpost.c +19 -32
@@ -713,41 +713,27 @@ int match(const char *sym, const char * const pat[])/* sections that we do not want to do full section mismatch check on */ static const char *section_white_list[] = - {".debug*" ,".stab*" ,".note*" ,".got*" ,".toc*" ,NULL }; + {".comment" ,".debug*" ,".stab*" ,".note*" ,".got*" ,".toc*" ,NULL };/* -* Is this section one we do not want to check? -* This is often debug sections. -* If we are going to check this section then -* test if section name ends with a dot and a number. -* This is used to find sections where the linker have -* appended a dot-number to make the name unique. +* This is used to find sections missing the SHF_ALLOC flag. * The cause of this is often a section specified in assembler -* without "ax" / "aw" and the same section used in .c -* code where gcc add these. +* without "ax" / "aw". */ -static int check_section (const char *modname,const char *sec) -{ -const char *e = sec +strlen (sec) -1 ; -if (match (sec, section_white_list)) -return 1 ; - -if (*e &&isdigit (*e)) { -/* consume all digits */ -while (*e && e != sec &&isdigit (*e)) - e--; -if (*e =='.' && !strstr (sec,".linkonce" )) { -warn ("%s (%s): unexpected section name.\n" -"The (.[number]+) following section name are " -"ld generated and not expected.\n" -"Did you forget to use \"ax\"/\"aw\" " -"in a .S file?\n" -"Note that for example <linux/init.h> contains\n" -"section definitions for use in .S files.\n\n" , - modname, sec); - } +static void check_section (const char *modname,struct elf_info *elf, +Elf_Shdr *sechdr) +{ +const char *sec =sech_name (elf, sechdr); + +if (sechdr->sh_type ==SHT_PROGBITS && + !(sechdr->sh_flags &SHF_ALLOC ) && + !match (sec, section_white_list)) { +warn ("%s (%s): unexpected non-allocatable section.\n" +"Did you forget to use \"ax\"/\"aw\" in a .S file?\n" +"Note that for example <linux/init.h> contains\n" +"section definitions for use in .S files.\n\n" , + modname, sec); } -return 0 ; }
@@ -1374,7 +1360,7 @@ static void section_rela(const char *modname, struct elf_info *elf, fromsec =sech_name (elf, sechdr); fromsec +=strlen (".rela" );/* if from section (name) is know good then skip it */ -if (check_section (modname, fromsec)) +if (match (fromsec, section_white_list))return ;for (rela = start; rela < stop; rela++) {
@@ -1418,7 +1404,7 @@ static void section_rel(const char *modname, struct elf_info *elf, fromsec =sech_name (elf, sechdr); fromsec +=strlen (".rel" );/* if from section (name) is know good then skip it */ -if (check_section (modname, fromsec)) +if (match (fromsec, section_white_list))return ;for (rel = start; rel < stop; rel++) {
@@ -1481,6 +1467,7 @@ static void check_sec_ref(struct module *mod, const char *modname,/* Walk through all sections */ for (i =0 ; i < elf->hdr->e_shnum; i++) { +check_section (modname, elf, &elf->sechdrs[i]);/* We want to process only relocation sections and not .init */ if (sechdrs[i].sh_type ==SHT_RELA )section_rela (modname, elf, &elf->sechdrs[i]);
Signature · 1 line
1.6.1.3
H. Peter Anvin
reviewerRe: [PATCH] modpost: Check the section flags, not name, to catch missing "ax"/"aw"
Quoted 7 lines · Anders Kaseorg
Quoted 5 lines · H. Peter Anvin
This is a pretty critical set of warnings, that often represent real bugs. I don't think it's acceptable to lose them. However, you already have (prior in the sequence) changed those section names to not conflict with the automatically generated ones, so it seems to me that this should be fixable without too much pain.
Quoted 8 lines
Actually, the problem arises from a conflict between two classes of automatically generated section names, one from ld, and one from gcc. Instead of basing the warning on section names (the existing heuristic also fails to warn on some cases where it should, as it turns out), what do you think about this patch? I've tested that it still triggers the warning when an "ax" or "aw" is incorrectly removed, and it should handle even more cases than before.
Seems reasonable to me.
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.