powerpc/86xx: Add binding for LAWs and MCM
Subsystems (3)
PATCH 1/2 powerpc/86xx: Add binding for LAWs and MCM
The first 4k region of CCSR space is well defined for local access windows, CCSRBAR, etc. The second 4k region is well defined as register for configuring and getting errors for the MPX coherency module.
Signed-off-by Kumar Gala <[email protected]>
--- Documentation/powerpc/dts-bindings/fsl/mcm.txt | 64 ++++++++++++++++++++++++ 1 files changed, 64 insertions(+), 0 deletions(-) create mode 100644 Documentation/powerpc/dts-bindings/fsl/mcm.txt
Documentation/powerpc/dts-bindings/fsl/mcm.txt new file +64 -0
@@ -0,0 +1,64 @@ +===================================================================== +MPX LAW & Coherency Module Device Tree Binding +Copyright (C) 2009 Freescale Semiconductor Inc. +===================================================================== + +Local Access Window (LAW) Node + +The LAW node represents the region of CCSR space where local access +windows are configured. For MCM based devices this is the first 4k +of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some +number of local access windows as specified by fsl,num-laws. + +PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,mcm-law" + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - fsl,num-laws + Usage: required + Value type: <u32> + Definition: The value specifies the number of local access + windows for this device. + +===================================================================== + +MPX Coherency Module Node + +The MPX LAW node represents the region of CCSR space where MCM config +and error reporting registers exist, this is the second 4k (0x1000) +of CCSR space. + +PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where + CHIP is the processor (mpc8641, mpc8610, etc.) + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - interrupts + Usage: required + Value type: <prop-encoded-array> + + - interrupt-parent + Usage: required + Value type: <phandle> + +=====================================================================
Signature · 1 line
1.6.0.6
PATCH 2/2 powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systems
Signed-off-by Kumar Gala <[email protected]>
--- arch/powerpc/boot/dts/gef_ppc9a.dts | 13 +++++++++++++ arch/powerpc/boot/dts/gef_sbc310.dts | 13 +++++++++++++ arch/powerpc/boot/dts/gef_sbc610.dts | 13 +++++++++++++ arch/powerpc/boot/dts/mpc8610_hpcd.dts | 13 +++++++++++++ arch/powerpc/boot/dts/mpc8641_hpcn.dts | 13 +++++++++++++ arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts | 13 +++++++++++++ arch/powerpc/boot/dts/sbc8641d.dts | 13 +++++++++++++ 7 files changed, 91 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/gef_ppc9a.dts +13 -0
@@ -166,6 +166,19 @@ reg = <0xfef00000 0x100000>; // CCSRBAR 1M bus-frequency = <33333333>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c1: i2c@3000 { #address-cells = <1>; #size-cells = <0>;
arch/powerpc/boot/dts/gef_sbc310.dts +13 -0
@@ -166,6 +166,19 @@ reg = <0xfef00000 0x100000>; // CCSRBAR 1M bus-frequency = <33333333>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c1: i2c@3000 { #address-cells = <1>; #size-cells = <0>;
arch/powerpc/boot/dts/gef_sbc610.dts +13 -0
@@ -131,6 +131,19 @@ reg = <0xfef00000 0x100000>; // CCSRBAR 1M bus-frequency = <33333333>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c1: i2c@3000 { #address-cells = <1>; #size-cells = <0>;
arch/powerpc/boot/dts/mpc8610_hpcd.dts +13 -0
@@ -115,6 +115,19 @@ reg = <0xe0000000 0x1000>; bus-frequency = <0>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8610-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>;
arch/powerpc/boot/dts/mpc8641_hpcn.dts +13 -0
@@ -117,6 +117,19 @@ reg = <0xffe00000 0x00001000>; // CCSRBAR bus-frequency = <0>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>;
arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts +13 -0
@@ -110,6 +110,19 @@ reg = <0x0f 0xffe00000 0x0 0x00001000>; // CCSRBAR bus-frequency = <0>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>;
arch/powerpc/boot/dts/sbc8641d.dts +13 -0
@@ -129,6 +129,19 @@ reg = <0xf8000000 0x00001000>; // CCSRBAR bus-frequency = <0>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
1.6.0.6
Re: [PATCH 2/2] powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systems
Quoted 11 lines · Kumar Gala
Signed-off-by Kumar Gala <[email protected]>--- arch/powerpc/boot/dts/gef_ppc9a.dts | 13 +++++++++++++ arch/powerpc/boot/dts/gef_sbc310.dts | 13 +++++++++++++ arch/powerpc/boot/dts/gef_sbc610.dts | 13 +++++++++++++ arch/powerpc/boot/dts/mpc8610_hpcd.dts | 13 +++++++++++++ arch/powerpc/boot/dts/mpc8641_hpcn.dts | 13 +++++++++++++ arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts | 13 +++++++++++++ arch/powerpc/boot/dts/sbc8641d.dts | 13 +++++++++++++ 7 files changed, 91 insertions(+), 0 deletions(-)
Am I right in thinking that this patch doesn't (as yet) enable any added functionality, or have I missed something?
I assume this is destined for next (as it relies on Becky's "powerpc/86xx: Add 36-bit device tree for mpc8641hpcn"), assuming this, fwiw, seems good to me.
Martyn
Signature · 4 lines
Martyn Welch MEng MPhil MIET (Principal Software Engineer) T:+44(0)1327322748 GE Fanuc Intelligent Platforms Ltd, |Registered in England and Wales Tove Valley Business Park, Towcester, |(3828642) at 100 Barbirolli Square, Northants, NN12 6PF, UK T:+44(0)1327359444 |Manchester,M2 3AB VAT:GB 927559189