OMAP3EVM: Set default bootfile
PATCH 1/1 OMAP3EVM: Set default bootfile
The current configuration doesn't define default
bootfile; leading to this warning at execution:
OMAP3_EVM # dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img' TFTP from server 0.0.0.0; our IP address is 192.168.1.11; sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address: 0x82000000
Loading: *
TFTP error: 'File not found' (1)
--- include/configs/omap3_evm.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/omap3_evm.h +2 -0
@@ -149,6 +149,8 @@/* Environment information */ #define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTFILE uImage +#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \
Signature · 1 line
1.6.2.2
PATCH 1/1 OMAP3EVM: Set default bootfile
Dear Sanjeev Premi,
Quoted 2 lines · In message <[email protected]> you wrote:
The current configuration doesn't define default
bootfile; leading to this warning at execution:
Note that this is not a problem, but a decision of the board maintainer.
Also, you can always just use setenv + saveenv if you want this changed on your board.
Quoted 11 lines
OMAP3_EVM# dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img' TFTP from server 0.0.0.0; our IP address is 192.168.1.11; sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address:0x82000000
Loading: *
TFTP error: 'File not found' (1)
This is standard behaviour and not a problem.
Quoted 10 lines
Signed-off-by Sanjeev Premi <[email protected]>--- include/configs/omap3_evm.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)include/configs/omap3_evm.h +0
-0
include/configs/omap3_evm.h line 153
Quoted 5 lines
include/configs/omap3_evm.h +2
-0@@ -149,6 +149,8 @@/* Environment information */ #define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTFILE uImage +
You should probably add the board maintainer on Cc: (done here) to get his ACK.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The thing is, as you progress in the Craft, you'll learn there is
another rule... When you break rules, break 'em good and hard.
- Terry Pratchett, _Wyrd Sisters_Premi
PATCH 1/1 OMAP3EVM: Set default bootfile
Quoted 47 lines
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Tuesday, May 05, 2009 3:51 PM
To: Premi, Sanjeev
Cc: u-boot at lists.denx.de; Pillai, Manikandan
Subject: Re: [U-Boot] [PATCH] OMAP3EVM: Set default bootfileDear Sanjeev Premi,
Quoted 2 lines · In message <[email protected]> you wrote:
The current configuration doesn't define default
bootfile; leading to this warning at execution:Note that this is not a problem, but a decision of the board maintainer.
Also, you can always just use setenv + saveenv if you want this changed on your board.
Quoted 11 lines
OMAP3_EVM# dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img' TFTP from server 0.0.0.0; our IP address is 192.168.1.11; sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address:0x82000000
Loading: *
TFTP error: 'File not found' (1)This is standard behaviour and not a problem.
Review
Quoted 6 lines
Signed-off-by Sanjeev Premi <[email protected]>--- include/configs/omap3_evm.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)(quoted diff) +0
-0
b/include/configs/omap3_evm.hQuoted 7 lines
index 549cef9..e205c01 100644
include/configs/omap3_evm.h +0
-0@@ -149,6 +149,8 @@/* Environment information */ #define CONFIG_BOOTDELAY 10
Quoted 5 lines
include/configs/omap3_evm.h line 153
Quoted 2 lines
include/configs/omap3_evm.h +2
-0+#define CONFIG_BOOTFILE uImage +You should probably add the board maintainer on Cc: (done here) to get his ACK.
In this case, the board maintainer works with me. He will ACK it.
Quoted 14 lines
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The thing is, as you progress in the Craft, you'll learn there is another rule... When you break rules, break 'em good and hard. - Terry Pratchett, _Wyrd Sisters_
Pillai
PATCH 1/1 OMAP3EVM: Set default bootfile
In reply to Wolfgang DenkQuoted 48 lines
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Tuesday, May 05, 2009 3:51 PM
To: Premi, Sanjeev
Cc: u-boot at lists.denx.de; Pillai, Manikandan
Subject: Re: [U-Boot] [PATCH] OMAP3EVM: Set default bootfileDear Sanjeev Premi,
Quoted 2 lines · In message <[email protected]> you wrote:
The current configuration doesn't define default
bootfile; leading to this warning at execution:Note that this is not a problem, but a decision of the board maintainer.
Also, you can always just use setenv + saveenv if you want this changed on your board.
Quoted 11 lines
OMAP3_EVM# dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img' TFTP from server 0.0.0.0; our IP address is 192.168.1.11; sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address:0x82000000
Loading: *
TFTP error: 'File not found' (1)This is standard behaviour and not a problem.
Quoted 13 lines
Signed-off-by Sanjeev Premi <[email protected]>--- include/configs/omap3_evm.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)include/configs/omap3_evm.h +0
-0@@ -149,6 +149,8 @@/* Environment information */ #define CONFIG_BOOTDELAY 10
Quoted 5 lines
include/configs/omap3_evm.h line 153
Quoted 2 lines
include/configs/omap3_evm.h +2
-0+#define CONFIG_BOOTFILE uImage +You should probably add the board maintainer on Cc: (done here) to get his ACK.
[Pillai, Manikandan]
Acked
Quoted 12 lines
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The thing is, as you progress in the Craft, you'll learn there is another rule... When you break rules, break 'em good and hard.
- Terry Pratchett,_WyrdSisters_
PATCH 1/1 OMAP3EVM: Set default bootfile
In reply to Sanjeev PremiQuoted 15 lines · Sanjeev Premi
The current configuration doesn't define default
bootfile; leading to this warning at execution:
OMAP3_EVM# dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img' TFTP from server 0.0.0.0; our IP address is 192.168.1.11; sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address:0x82000000
Loading: *
TFTP error: 'File not found' (1)
Quoted 1 line
Signed-off-by Sanjeev Premi <[email protected]>
Quoted 17 lines
--- include/configs/omap3_evm.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)include/configs/omap3_evm.h +2
-0@@ -149,6 +149,8 @@/* Environment information */ #define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTFILE uImage +#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \
PATCH 1/1 OMAP3EVM: Set default bootfile
In reply to Sanjeev PremiQuoted 14 lines · Sanjeev Premi
The current configuration doesn't define default
bootfile; leading to this warning at execution:
OMAP3_EVM# dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img' TFTP from server 0.0.0.0; our IP address is 192.168.1.11; sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address:0x82000000
Loading: *
TFTP error: 'File not found' (1)
IMHO it's the correct way as you will be allow to have only one tftp server with one file per mac address
but as the Board Maintainer Ack it ok
as it's not really a fix but a preference it will be for the next expect you have a specific reason for this release
Best Regards,
J.
Jean-Christophe PLAGNIOL-VILLARD
AppliedPATCH 1/1 OMAP3EVM: Set default bootfile
In reply to Sanjeev PremiQuoted 15 lines · Sanjeev Premi
The current configuration doesn't define default
bootfile; leading to this warning at execution:
OMAP3_EVM# dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img' TFTP from server 0.0.0.0; our IP address is 192.168.1.11; sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address:0x82000000
Loading: *
TFTP error: 'File not found' (1)
Quoted 2 lines
Signed-off-by Sanjeev Premi <[email protected]>---
applied to arm/next
Best Regards,
J.