83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
PATCH 1/2 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
Use the standard lowercase "xx" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors
--- api/api_platform-ppc.c | 2 +- board/freescale/mpc8349emds/mpc8349emds.c | 2 +- board/sbc8349/sbc8349.c | 2 +- common/fdt_support.c | 4 ++-- cpu/mpc83xx/config.mk | 2 +- doc/README.mpc832xemds | 2 +- doc/README.mpc8349itx | 2 +- doc/README.mpc8360emds | 2 +- doc/README.mpc837xemds | 2 +- doc/README.mpc837xerdb | 2 +- include/asm-ppc/global_data.h | 6 +++--- include/asm-ppc/processor.h | 4 ++-- include/asm-ppc/u-boot.h | 2 +- include/common.h | 8 ++++---- include/configs/MPC8313ERDB.h | 2 +- include/configs/MPC8315ERDB.h | 2 +- include/configs/MPC8323ERDB.h | 2 +- include/configs/MPC832XEMDS.h | 2 +- include/configs/MPC8349EMDS.h | 2 +- include/configs/MPC8360EMDS.h | 2 +- include/configs/MPC8360ERDK.h | 2 +- include/configs/MPC837XEMDS.h | 2 +- include/configs/MPC837XERDB.h | 2 +- include/configs/MVBLM7.h | 2 +- include/configs/SIMPC8313.h | 2 +- include/configs/TQM834x.h | 2 +- include/configs/kmeter1.h | 2 +- include/configs/sbc8349.h | 2 +- include/fdt_support.h | 2 +- include/tsec.h | 2 +- lib_ppc/board.c | 8 ++++---- 31 files changed, 41 insertions(+), 41 deletions(-)
api/api_platform-ppc.c +1 -1
@@ -53,7 +53,7 @@ int platform_sys_info(struct sys_info *si)#define bi_bar bi_immr_base#elif defined(CONFIG_MPC5xxx)#define bi_bar bi_mbar_base -#elif defined(CONFIG_MPC83XX ) +#elif defined(CONFIG_MPC83xx)#define bi_bar bi_immrbar#elif defined(CONFIG_MPC8220 )#define bi_bar bi_mbar_base
board/freescale/mpc8349emds/mpc8349emds.c +1 -1
@@ -38,7 +38,7 @@int fixed_sdram (void );void sdram_init (void ); -#if defined(CONFIG_DDR_ECC ) && defined(CONFIG_MPC83XX ) +#if defined(CONFIG_DDR_ECC ) && defined(CONFIG_MPC83xx)void ddr_enable_ecc (unsigned int dram_size);#endif
board/sbc8349/sbc8349.c +1 -1
@@ -39,7 +39,7 @@int fixed_sdram (void );void sdram_init (void ); -#if defined(CONFIG_DDR_ECC ) && defined(CONFIG_MPC83XX ) +#if defined(CONFIG_DDR_ECC ) && defined(CONFIG_MPC83xx)void ddr_enable_ecc (unsigned int dram_size);#endif
common/fdt_support.c +2 -2
@@ -495,7 +495,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) }#endif /* CONFIG_HAS_FSL_DR_USB */ -#if defined(CONFIG_MPC83XX ) || defined(CONFIG_MPC85xx) +#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)/* * update crypto node properties to a specified revision of the SEC * called with sec_rev == 0 if not on an mpc8xxxE processor
@@ -580,7 +580,7 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)printf ("WARNING: could not set crypto property: %s\n" , fdt_strerror(err)); } -#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */ +#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */ /* Resize the fdt to its actual size + a bit of padding */ int fdt_resize (void *blob)
cpu/mpc83xx/config.mk +1 -1
@@ -22,7 +22,7 @@ PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -PLATFORM_CPPFLAGS += -DCONFIG_MPC83XX -DCONFIG_E300 \ +PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \ -ffixed-r2 -msoft-float # Use default linker script. Board port can override in board/*/config.mk
doc/README.mpc832xemds +1 -1
@@ -83,7 +83,7 @@ Freescale MPC832XEMDS Board include/configs/MPC832XEPB.h - CONFIG_MPC83XX MPC83XX family for MPC8349, MPC8360 and MPC832X + CONFIG_MPC83xx MPC83XX family for MPC8349, MPC8360 and MPC832X CONFIG_MPC832X MPC832X specific CONFIG_MPC832XEMDS MPC832XEMDS board specific
doc/README.mpc8349itx +1 -1
@@ -88,7 +88,7 @@ Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards include/configs/MPC8349ITX.h - CONFIG_MPC83XX MPC83xx family + CONFIG_MPC83xx MPC83xx family CONFIG_MPC8349 MPC8349 specific CONFIG_MPC8349ITX MPC8349E-mITX CONFIG_MPC8349ITXGP MPC8349E-mITX-GP
doc/README.mpc8360emds +1 -1
@@ -81,7 +81,7 @@ Freescale MPC8360EMDS Board include/configs/MPC8360EMDS.h - CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360 + CONFIG_MPC83xx MPC83xx family for both MPC8349 and MPC8360 CONFIG_MPC8360 MPC8360 specific CONFIG_MPC8360EMDS MPC8360EMDS board specific
doc/README.mpc837xemds +1 -1
@@ -60,7 +60,7 @@ Freescale MPC837xEMDS Board include/configs/MPC837XEMDS.h - CONFIG_MPC83XX MPC83xx family for both MPC837x and MPC8360 + CONFIG_MPC83xx MPC83xx family for both MPC837x and MPC8360 CONFIG_MPC837X MPC837x specific CONFIG_MPC837XEMDS MPC837XEMDS board specific
doc/README.mpc837xerdb +1 -1
@@ -52,7 +52,7 @@ Freescale MPC837xE-RDB Board include/configs/MPC837XERDB.h - CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360 + CONFIG_MPC83xx MPC83xx family for both MPC8349 and MPC8360 CONFIG_MPC837X MPC837x specific CONFIG_MPC837XERDB MPC837xE-RDB board specific
include/asm-ppc/global_data.h +3 -3
@@ -56,7 +56,7 @@ typedef struct global_data {#endif #endif unsigned long mem_clk; -#if defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC83xx)/* There are other clocks in the MPC83XX */ u32 csb_clk;#if defined(CONFIG_MPC834X ) || defined(CONFIG_MPC831X ) || defined(CONFIG_MPC837X )
@@ -92,7 +92,7 @@ typedef struct global_data {#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)u32 lbc_clk;#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */ -#if defined(CONFIG_MPC83XX ) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) +#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)u32 i2c1_clk;u32 i2c2_clk;#endif
@@ -125,7 +125,7 @@ typedef struct global_data {phys_size_t ram_size;/* RAM size */ unsigned long reloc_off;/* Relocation Offset */ unsigned long reset_status;/* reset status register at boot */ -#if defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC83xx)unsigned long arbiter_event_attributes;unsigned long arbiter_event_address;#endif
include/asm-ppc/processor.h +2 -2
@@ -923,7 +923,7 @@#if defined(CONFIG_MPC85xx)#define IS_E_PROCESSOR (svr) (svr & 0x80000)#else -#if defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC83xx)#define IS_E_PROCESSOR (spridr) (!(spridr & 0x00010000))#endif #endif
@@ -1023,7 +1023,7 @@ struct cpu_type *identify_cpu(u32 ver);#define CPU_TYPE_ENTRY (n, v) \ { .name = #n, .soc_ver = SVR_##v, }#else -#if defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC83xx)#define CPU_TYPE_ENTRY (x) {#x, SPR_##x}#endif #endif
include/asm-ppc/u-boot.h +1 -1
@@ -51,7 +51,7 @@ typedef struct bd_info {#if defined(CONFIG_MPC5xxx)unsigned long bi_mbar_base;/* base of internal registers */ #endif -#if defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC83xx)unsigned long bi_immrbar;#endif #if defined(CONFIG_MPC8220 )
include/common.h +4 -4
@@ -90,7 +90,7 @@ typedef volatile unsigned char vu_char;#include <mpc85xx.h> #include <asm/immap_85xx.h> #endif -#ifdef CONFIG_MPC83XX +#ifdef CONFIG_MPC83xx#include <mpc83xx.h> #include <asm/immap_83xx.h> #endif
@@ -410,7 +410,7 @@ void trap_init (ulong);defined (CONFIG_MPC8220 ) || \defined (CONFIG_MPC85xx) || \defined (CONFIG_MPC86xx) || \ - defined (CONFIG_MPC83XX) + defined (CONFIG_MPC83xx)unsigned char in8 (unsigned int );void out8 (unsigned int ,unsigned char );unsigned short in16 (unsigned int );
@@ -431,7 +431,7 @@ unsigned short in16(unsigned int);void out16 (unsigned int ,unsigned short value);#endif -#if defined (CONFIG_MPC83XX ) +#if defined (CONFIG_MPC83xx)void ppcDWload (unsigned int *addr,unsigned int *ret);void ppcDWstore (unsigned int *addr,unsigned int *value);#endif
@@ -548,7 +548,7 @@ void cpu_init_f (void);int cpu_init_r (void );#if defined(CONFIG_8260 )int prt_8260_rsr (void ); -#elif defined(CONFIG_MPC83XX ) +#elif defined(CONFIG_MPC83xx)int prt_83xx_rsr (void );#endif
include/configs/MPC8313ERDB.h +1 -1
@@ -30,7 +30,7 @@* High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83XX 1 +#define CONFIG_MPC83xx 1#define CONFIG_MPC831X 1#define CONFIG_MPC8313 1#define CONFIG_MPC8313ERDB 1
include/configs/MPC8315ERDB.h +1 -1
@@ -29,7 +29,7 @@* High Level Configuration Options */ #define CONFIG_E300 1/* E300 family */ -#define CONFIG_MPC83XX 1/* MPC83xx family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC831X 1/* MPC831x CPU family */ #define CONFIG_MPC8315 1/* MPC8315 CPU specific */ #define CONFIG_MPC8315ERDB 1/* MPC8315ERDB board specific */
include/configs/MPC8323ERDB.h +1 -1
@@ -14,7 +14,7 @@*/ #define CONFIG_E300 1/* E300 family */ #define CONFIG_QE 1/* Has QE */ -#define CONFIG_MPC83XX 1/* MPC83xx family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC832X 1/* MPC832x CPU specific */ #define CONFIG_PCI 1
include/configs/MPC832XEMDS.h +1 -1
@@ -25,7 +25,7 @@*/ #define CONFIG_E300 1/* E300 family */ #define CONFIG_QE 1/* Has QE */ -#define CONFIG_MPC83XX 1/* MPC83xx family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC832X 1/* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1/* MPC832XEMDS board specific */ #undef CONFIG_PQ_MDS_PIB/* POWERQUICC MDS Platform IO Board */
include/configs/MPC8349EMDS.h +1 -1
@@ -33,7 +33,7 @@* High Level Configuration Options */ #define CONFIG_E300 1/* E300 Family */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC834X 1/* MPC834X family */ #define CONFIG_MPC8349 1/* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1/* MPC8349EMDS board specific */
include/configs/MPC8360EMDS.h +1 -1
@@ -27,7 +27,7 @@*/ #define CONFIG_E300 1/* E300 family */ #define CONFIG_QE 1/* Has QE */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC8360 1/* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1/* MPC8360EMDS board specific */ #undef CONFIG_PQ_MDS_PIB/* POWERQUICC MDS Platform IO Board */
include/configs/MPC8360ERDK.h +1 -1
@@ -22,7 +22,7 @@*/ #define CONFIG_E300 1/* E300 family */ #define CONFIG_QE 1/* Has QE */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC8360 1/* MPC8360 CPU specific */ #define CONFIG_MPC8360ERDK 1/* MPC8360ERDK board specific */
include/configs/MPC837XEMDS.h +1 -1
@@ -25,7 +25,7 @@* High Level Configuration Options */ #define CONFIG_E300 1/* E300 family */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC837X 1/* MPC837X CPU specific */ #define CONFIG_MPC837XEMDS 1/* MPC837XEMDS board specific */
include/configs/MPC837XERDB.h +1 -1
@@ -26,7 +26,7 @@* High Level Configuration Options */ #define CONFIG_E300 1/* E300 family */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83XX family */ #define CONFIG_MPC837X 1/* MPC837X CPU specific */ #define CONFIG_MPC837XERDB 1
include/configs/MVBLM7.h +1 -1
@@ -33,7 +33,7 @@* High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83XX 1 +#define CONFIG_MPC83xx 1#define CONFIG_MPC834X 1#define CONFIG_MPC8343 1
include/configs/SIMPC8313.h +1 -1
@@ -32,7 +32,7 @@#define CONFIG_NAND_U_BOOT #define CONFIG_E300 1 -#define CONFIG_MPC83XX 1 +#define CONFIG_MPC83xx 1#define CONFIG_MPC831X 1#define CONFIG_MPC8313 1
include/configs/TQM834x.h +1 -1
@@ -32,7 +32,7 @@* High Level Configuration Options */ #define CONFIG_E300 1/* E300 Family */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC834X 1/* MPC834X specific */ #define CONFIG_MPC8349 1/* MPC8349 specific */ #define CONFIG_TQM834X 1/* TQM834X board specific */
include/configs/kmeter1.h +1 -1
@@ -25,7 +25,7 @@*/ #define CONFIG_E300 1/* E300 family */ #define CONFIG_QE 1/* Has QE */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC8360 1/* MPC8360 CPU specific */ #define CONFIG_KMETER1 1/* KMETER1 board specific */ #define CONFIG_HOSTNAME kmeter1
include/configs/sbc8349.h +1 -1
@@ -35,7 +35,7 @@* High Level Configuration Options */ #define CONFIG_E300 1/* E300 Family */ -#define CONFIG_MPC83XX 1/* MPC83XX family */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ #define CONFIG_MPC834X 1/* MPC834X family */ #define CONFIG_MPC8349 1/* MPC8349 specific */ #define CONFIG_SBC8349 1/* WRS SBC8349 board specific */
include/fdt_support.h +1 -1
@@ -59,7 +59,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd);static inline void fdt_fixup_dr_usb (void *blob,bd_t *bd) {}#endif /* CONFIG_HAS_FSL_DR_USB */ -#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)void fdt_fixup_crypto_node (void *blob,int sec_rev);#else static inline void fdt_fixup_crypto_node (void *blob,int sec_rev) {}
include/tsec.h +1 -1
@@ -28,7 +28,7 @@/* FIXME: Should these be pushed back to 83xx and 85xx config files? */ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \ - || defined(CONFIG_MPC83XX ) + || defined(CONFIG_MPC83xx)#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)#endif
lib_ppc/board.c +4 -4
@@ -321,7 +321,7 @@ init_fnc_t *init_sequence[] = { prt_8260_rsr, prt_8260_clks,#endif /* CONFIG_8260 */ -#if defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC83xx) prt_83xx_rsr, #endif checkcpu,
@@ -408,7 +408,7 @@ void board_init_f (ulong bootflag)/* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("" : : :"memory" ); -#if !defined(CONFIG_CPM2 ) && !defined(CONFIG_MPC83XX ) && \ +#if !defined(CONFIG_CPM2 ) && !defined(CONFIG_MPC83xx) && \ !defined(CONFIG_MPC85xx) && !defined(CONFIG_MPC86xx)/* Clear initial global data */ memset ((void *) gd,0 ,sizeof (gd_t));
@@ -570,7 +570,7 @@ void board_init_f (ulong bootflag)#if defined(CONFIG_MPC5xxx) bd->bi_mbar_base =CONFIG_SYS_MBAR ;/* base of internal registers */ #endif -#if defined(CONFIG_MPC83XX ) +#if defined(CONFIG_MPC83xx) bd->bi_immrbar =CONFIG_SYS_IMMR ;#endif #if defined(CONFIG_MPC8220 )
@@ -750,7 +750,7 @@ void board_init_r (gd_t *id, ulong dest_addr)WATCHDOG_RESET (); -#if defined(CONFIG_SYS_DELAYED_ICACHE ) || defined(CONFIG_MPC83XX ) +#if defined(CONFIG_SYS_DELAYED_ICACHE ) || defined(CONFIG_MPC83xx)icache_enable ();/* it's time to enable the instruction cache */ #endif
Signature · 1 line
1.6.2.1
PATCH 2/2 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
Use the standard lowercase "x" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors
--- cpu/mpc83xx/cpu_init.c | 2 +- cpu/mpc83xx/speed.c | 66 ++++++++++++++++++++-------------------- doc/README.mpc832xemds | 6 ++-- doc/README.mpc837xemds | 2 +- doc/README.mpc837xerdb | 2 +- drivers/pci/pci_auto.c | 2 +- include/asm-ppc/fsl_lbc.h | 4 +- include/asm-ppc/global_data.h | 12 ++++---- include/asm-ppc/immap_83xx.h | 6 ++-- include/asm-ppc/immap_qe.h | 2 +- include/asm-ppc/mpc8xxx_spi.h | 4 +- include/configs/MPC8313ERDB.h | 2 +- include/configs/MPC8315ERDB.h | 2 +- include/configs/MPC8323ERDB.h | 2 +- include/configs/MPC832XEMDS.h | 2 +- include/configs/MPC8349EMDS.h | 2 +- include/configs/MPC8349ITX.h | 2 +- include/configs/MPC837XEMDS.h | 2 +- include/configs/MPC837XERDB.h | 4 +- include/configs/MVBLM7.h | 2 +- include/configs/SIMPC8313.h | 2 +- include/configs/TQM834x.h | 2 +- include/configs/sbc8349.h | 2 +- include/mpc83xx.h | 36 +++++++++++----------- 24 files changed, 85 insertions(+), 85 deletions(-)
cpu/mpc83xx/cpu_init.c +1 -1
@@ -185,7 +185,7 @@ void cpu_init_f (volatile immap_t * im)/* System General Purpose Register */ #ifdef CONFIG_SYS_SICRH -#if defined(CONFIG_MPC834X ) || defined(CONFIG_MPC8313 ) +#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313 )/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */ im->sysconf.sicrh = (im->sysconf.sicrh &0x0000000C ) |CONFIG_SYS_SICRH ;#else
cpu/mpc83xx/speed.c +33 -33
210 lines not on this page · raw message
doc/README.mpc832xemds +3 -3
@@ -83,8 +83,8 @@ Freescale MPC832XEMDS Board include/configs/MPC832XEPB.h - CONFIG_MPC83xx MPC83XX family for MPC8349, MPC8360 and MPC832X - CONFIG_MPC832X MPC832X specific + CONFIG_MPC83xx MPC83xx family for MPC8349, MPC8360 and MPC832x + CONFIG_MPC832x MPC832x specific CONFIG_MPC832XEMDS MPC832XEMDS board specific 4. Compilation
@@ -97,7 +97,7 @@ Freescale MPC832XEMDS Board make MPC832XEMDS_config make - MPC832X support PCI 33MHz and PCI 66MHz, to make u-boot support PCI: + MPC832x support PCI 33MHz and PCI 66MHz, to make u-boot support PCI: 1)Make sure the DIP SW support PCI mode as described in Section 1.1.
doc/README.mpc837xemds +1 -1
@@ -61,7 +61,7 @@ Freescale MPC837xEMDS Board include/configs/MPC837XEMDS.h CONFIG_MPC83xx MPC83xx family for both MPC837x and MPC8360 - CONFIG_MPC837X MPC837x specific + CONFIG_MPC837x MPC837x specific CONFIG_MPC837XEMDS MPC837XEMDS board specific 4. Compilation
doc/README.mpc837xerdb +1 -1
@@ -53,7 +53,7 @@ Freescale MPC837xE-RDB Board include/configs/MPC837XERDB.h CONFIG_MPC83xx MPC83xx family for both MPC8349 and MPC8360 - CONFIG_MPC837X MPC837x specific + CONFIG_MPC837x MPC837x specific CONFIG_MPC837XERDB MPC837xE-RDB board specific
drivers/pci/pci_auto.c +1 -1
@@ -403,7 +403,7 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) PCI_DEV(dev));break ;#endif -#ifdef CONFIG_MPC834X +#ifdef CONFIG_MPC834xcase PCI_CLASS_BRIDGE_OTHER :/* * The host/PCI bridge 1 seems broken in 8349 - it presents
include/asm-ppc/fsl_lbc.h +2 -2
@@ -54,7 +54,7 @@#define BR_MS_UPMA 0x00000080/* UPMA */ #define BR_MS_UPMB 0x000000A0/* UPMB */ #define BR_MS_UPMC 0x000000C0/* UPMC */ -#if !defined(CONFIG_MPC834X ) +#if !defined(CONFIG_MPC834x)#define BR_ATOM 0x0000000C#define BR_ATOM_SHIFT 2#endif
@@ -65,7 +65,7 @@#define UPMB 1#define UPMC 2 -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)#else #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
include/asm-ppc/global_data.h +6 -6
@@ -59,14 +59,14 @@ typedef struct global_data {#if defined(CONFIG_MPC83xx)/* There are other clocks in the MPC83XX */ u32 csb_clk; -#if defined(CONFIG_MPC834X ) || defined(CONFIG_MPC831X ) || defined(CONFIG_MPC837X ) +#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)u32 tsec1_clk;u32 tsec2_clk;u32 usbdr_clk;#endif -#if defined (CONFIG_MPC834X ) +#if defined (CONFIG_MPC834x)u32 usbmph_clk; -#endif /* CONFIG_MPC834X */ +#endif /* CONFIG_MPC834x */ #if defined(CONFIG_MPC8315 )u32 tdm_clk;#endif
@@ -75,18 +75,18 @@ typedef struct global_data {u32 lbiu_clk;u32 lclk_clk;u32 pci_clk; -#if defined(CONFIG_MPC837X ) || defined(CONFIG_MPC831X ) +#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)u32 pciexp1_clk;u32 pciexp2_clk;#endif -#if defined(CONFIG_MPC837X ) || defined(CONFIG_MPC8315 ) +#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315 )u32 sata_clk;#endif #if defined(CONFIG_MPC8360 )u32 mem_sec_clk;#endif /* CONFIG_MPC8360 */ #endif -#if defined(CONFIG_MPC837X ) || defined(CONFIG_MPC8536 ) +#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8536 )u32 sdhc_clk;#endif #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
include/asm-ppc/immap_83xx.h +3 -3
@@ -656,7 +656,7 @@ typedef struct tdmdmac83xx {u8 fixme[0x2000 ]; } tdmdmac83xx_t; -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834x) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
@@ -773,7 +773,7 @@ typedef struct immap { u8 res12[0x1CF00]; } immap_t; -#elif defined(CONFIG_MPC837X) +#elif defined(CONFIG_MPC837x) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
@@ -857,7 +857,7 @@ typedef struct immap { u8 qe[0x100000]; /* QE block */ } immap_t; -#elif defined(CONFIG_MPC832X) +#elif defined(CONFIG_MPC832x) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
include/asm-ppc/immap_qe.h +1 -1
@@ -598,7 +598,7 @@ extern qe_map_t *qe_immr;#define QE_MURAM_SIZE 0x10000UL#elif defined(CONFIG_MPC8360 )#define QE_MURAM_SIZE 0xc000UL -#elif defined(CONFIG_MPC832X ) +#elif defined(CONFIG_MPC832x)#define QE_MURAM_SIZE 0x4000UL#endif
include/asm-ppc/mpc8xxx_spi.h +2 -2
@@ -27,10 +27,10 @@#include <asm/types.h> -#if defined(CONFIG_MPC834X) || \ +#if defined(CONFIG_MPC834x) || \ defined(CONFIG_MPC8313) || \ defined(CONFIG_MPC8315) || \ - defined(CONFIG_MPC837X) + defined(CONFIG_MPC837x) typedef struct spi8xxx { u8 res0[0x20]; /* 0x0-0x01f reserved */
include/configs/MPC8313ERDB.h +1 -1
@@ -31,7 +31,7 @@*/ #define CONFIG_E300 1#define CONFIG_MPC83xx 1 -#define CONFIG_MPC831X 1 +#define CONFIG_MPC831x 1#define CONFIG_MPC8313 1#define CONFIG_MPC8313ERDB 1
include/configs/MPC8315ERDB.h +1 -1
@@ -30,7 +30,7 @@*/ #define CONFIG_E300 1/* E300 family */ #define CONFIG_MPC83xx 1/* MPC83xx family */ -#define CONFIG_MPC831X 1/* MPC831x CPU family */ +#define CONFIG_MPC831x 1/* MPC831x CPU family */ #define CONFIG_MPC8315 1/* MPC8315 CPU specific */ #define CONFIG_MPC8315ERDB 1/* MPC8315ERDB board specific */
include/configs/MPC8323ERDB.h +1 -1
@@ -15,7 +15,7 @@#define CONFIG_E300 1/* E300 family */ #define CONFIG_QE 1/* Has QE */ #define CONFIG_MPC83xx 1/* MPC83xx family */ -#define CONFIG_MPC832X 1/* MPC832x CPU specific */ +#define CONFIG_MPC832x 1/* MPC832x CPU specific */ #define CONFIG_PCI 1#define CONFIG_83XX_GENERIC_PCI 1
include/configs/MPC832XEMDS.h +1 -1
@@ -26,7 +26,7 @@#define CONFIG_E300 1/* E300 family */ #define CONFIG_QE 1/* Has QE */ #define CONFIG_MPC83xx 1/* MPC83xx family */ -#define CONFIG_MPC832X 1/* MPC832x CPU specific */ +#define CONFIG_MPC832x 1/* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1/* MPC832XEMDS board specific */ #undef CONFIG_PQ_MDS_PIB/* POWERQUICC MDS Platform IO Board */ #undef CONFIG_PQ_MDS_PIB_ATM/* QOC3 ATM card */
include/configs/MPC8349EMDS.h +1 -1
@@ -34,7 +34,7 @@*/ #define CONFIG_E300 1/* E300 Family */ #define CONFIG_MPC83xx 1/* MPC83xx family */ -#define CONFIG_MPC834X 1/* MPC834X family */ +#define CONFIG_MPC834x 1/* MPC834x family */ #define CONFIG_MPC8349 1/* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1/* MPC8349EMDS board specific */
include/configs/MPC8349ITX.h +1 -1
@@ -63,7 +63,7 @@/* * High Level Configuration Options */ -#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ +#define CONFIG_MPC834x/* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ #define CONFIG_SYS_IMMR 0xE0000000/* The IMMR is relocated to here */
include/configs/MPC837XEMDS.h +1 -1
@@ -26,7 +26,7 @@*/ #define CONFIG_E300 1/* E300 family */ #define CONFIG_MPC83xx 1/* MPC83xx family */ -#define CONFIG_MPC837X 1/* MPC837X CPU specific */ +#define CONFIG_MPC837x 1/* MPC837x CPU specific */ #define CONFIG_MPC837XEMDS 1/* MPC837XEMDS board specific */ /*
include/configs/MPC837XERDB.h +2 -2
@@ -26,8 +26,8 @@* High Level Configuration Options */ #define CONFIG_E300 1/* E300 family */ -#define CONFIG_MPC83xx 1/* MPC83XX family */ -#define CONFIG_MPC837X 1/* MPC837X CPU specific */ +#define CONFIG_MPC83xx 1/* MPC83xx family */ +#define CONFIG_MPC837x 1/* MPC837x CPU specific */ #define CONFIG_MPC837XERDB 1#define CONFIG_PCI 1
include/configs/MVBLM7.h +1 -1
@@ -34,7 +34,7 @@*/ #define CONFIG_E300 1#define CONFIG_MPC83xx 1 -#define CONFIG_MPC834X 1 +#define CONFIG_MPC834x 1#define CONFIG_MPC8343 1#define CONFIG_SYS_IMMR 0xE0000000
include/configs/SIMPC8313.h +1 -1
@@ -33,7 +33,7 @@#define CONFIG_E300 1#define CONFIG_MPC83xx 1 -#define CONFIG_MPC831X 1 +#define CONFIG_MPC831x 1#define CONFIG_MPC8313 1#define CONFIG_PCI
include/configs/TQM834x.h +1 -1
@@ -33,7 +33,7 @@*/ #define CONFIG_E300 1/* E300 Family */ #define CONFIG_MPC83xx 1/* MPC83xx family */ -#define CONFIG_MPC834X 1/* MPC834X specific */ +#define CONFIG_MPC834x 1/* MPC834x specific */ #define CONFIG_MPC8349 1/* MPC8349 specific */ #define CONFIG_TQM834X 1/* TQM834X board specific */
include/configs/sbc8349.h +1 -1
@@ -36,7 +36,7 @@*/ #define CONFIG_E300 1/* E300 Family */ #define CONFIG_MPC83xx 1/* MPC83xx family */ -#define CONFIG_MPC834X 1/* MPC834X family */ +#define CONFIG_MPC834x 1/* MPC834x family */ #define CONFIG_MPC8349 1/* MPC8349 specific */ #define CONFIG_SBC8349 1/* WRS SBC8349 board specific */
include/mpc83xx.h +18 -18
@@ -54,7 +54,7 @@#define SPRIDR_PARTID 0xFFFF0000/* Part Id */ #define SPRIDR_REVID 0x0000FFFF/* Revision Id */ -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)#define REVID_MAJOR (spridr) ((spridr & 0x0000FF00) >> 8)#define REVID_MINOR (spridr) (spridr & 0x000000FF)#else
@@ -100,7 +100,7 @@#define SPCR_COREPR 0x00300000/* E300 PowerPC Core system bus request priority */ #define SPCR_COREPR_SHIFT (31-11) -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)/* SPCR bits - MPC8349 specific */ #define SPCR_TSEC1DP 0x00003000/* TSEC1 data priority */ #define SPCR_TSEC1DP_SHIFT (31-19)
@@ -115,7 +115,7 @@#define SPCR_TSEC2EP 0x00000003/* TSEC2 emergency priority */ #define SPCR_TSEC2EP_SHIFT (31-31) -#elif defined(CONFIG_MPC831X ) || defined(CONFIG_MPC837X ) +#elif defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)/* SPCR bits - MPC831x and MPC837x specific */ #define SPCR_TSECDP 0x00003000/* TSEC data priority */ #define SPCR_TSECDP_SHIFT (31-19)
@@ -127,7 +127,7 @@/* SICRL/H - System I/O Configuration Register Low/High */ -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)/* SICRL bits - MPC8349 specific */ #define SICRL_LDP_A 0x80000000#define SICRL_USB1 0x40000000
@@ -190,8 +190,8 @@#define SICRH_UC2E1OBI 0x00000002#define SICRH_UC2E2OBI 0x00000001 -#elif defined(CONFIG_MPC832X ) -/* SICRL bits - MPC832X specific */ +#elif defined(CONFIG_MPC832x) +/* SICRL bits - MPC832x specific */ #define SICRL_LDP_LCS_A 0x80000000#define SICRL_IRQ_CKS 0x20000000#define SICRL_PCI_MSRC 0x10000000
@@ -262,7 +262,7 @@#define SICRH_TSOBI1 0x00000002#define SICRH_TSOBI2 0x00000001 -#elif defined(CONFIG_MPC837X ) +#elif defined(CONFIG_MPC837x)/* SICRL bits - MPC837x specific */ #define SICRL_USB_A 0xC0000000#define SICRL_USB_B 0x30000000
@@ -424,7 +424,7 @@#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000#define HRCWL_CORE_TO_CSB_3X1 0x00060000 -#if defined(CONFIG_MPC8360 ) || defined(CONFIG_MPC832X ) +#if defined(CONFIG_MPC8360 ) || defined(CONFIG_MPC832x)#define HRCWL_CEVCOD 0x000000C0#define HRCWL_CEVCOD_SHIFT 6#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000
@@ -478,7 +478,7 @@#define HRCWL_SVCOD_DIV_8 0x20000000#define HRCWL_SVCOD_DIV_1 0x30000000 -#elif defined(CONFIG_MPC837X ) +#elif defined(CONFIG_MPC837x)#define HRCWL_SVCOD 0x30000000#define HRCWL_SVCOD_SHIFT 28#define HRCWL_SVCOD_DIV_4 0x00000000
@@ -493,7 +493,7 @@#define HRCWH_PCI_HOST_SHIFT 31#define HRCWH_PCI_AGENT 0x00000000 -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)#define HRCWH_32_BIT_PCI 0x00000000#define HRCWH_64_BIT_PCI 0x40000000#endif
@@ -504,7 +504,7 @@#define HRCWH_PCI_ARBITER_DISABLE 0x00000000#define HRCWH_PCI_ARBITER_ENABLE 0x20000000 -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000
@@ -528,17 +528,17 @@#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000#define HRCWH_ROM_LOC_PCI1 0x00100000 -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)#define HRCWH_ROM_LOC_PCI2 0x00200000#endif -#if defined(CONFIG_MPC837X ) +#if defined(CONFIG_MPC837x)#define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000#endif #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 -#if defined(CONFIG_MPC831X ) || defined(CONFIG_MPC837X ) +#if defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
@@ -562,7 +562,7 @@#define HRCWH_TSEC2M_IN_SGMII 0x00001800#endif -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)#define HRCWH_TSEC1M_IN_RGMII 0x00000000#define HRCWH_TSEC1M_IN_RTBI 0x00004000#define HRCWH_TSEC1M_IN_GMII 0x00008000
@@ -589,7 +589,7 @@/* RSR - Reset Status Register */ -#if defined(CONFIG_MPC831X ) || defined(CONFIG_MPC837X ) +#if defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)#define RSR_RSTSRC 0xF0000000/* Reset source */ #define RSR_RSTSRC_SHIFT 28#else
@@ -682,7 +682,7 @@#define SCCR_PCICM 0x00010000#define SCCR_PCICM_SHIFT 16 -#if defined(CONFIG_MPC834X ) +#if defined(CONFIG_MPC834x)/* SCCR bits - MPC834x specific */ #define SCCR_TSEC1CM 0xc0000000#define SCCR_TSEC1CM_SHIFT 30
@@ -770,7 +770,7 @@#define SCCR_TDMCM_2 0x00000020#define SCCR_TDMCM_3 0x00000030 -#elif defined(CONFIG_MPC837X ) +#elif defined(CONFIG_MPC837x)/* SCCR bits - MPC837x specific */ #define SCCR_TSEC1CM 0xc0000000#define SCCR_TSEC1CM_SHIFT 30
Signature · 1 line
1.6.2.1
PATCH 1/2 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
In reply to Peter TyserQuoted 5 lines · On Fri, 22 May 2009 17:23:24 -0500 Peter Tyser <[email protected]> wrote:
Use the standard lowercase "xx" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors
Signed-off-by Peter Tyser <[email protected]>---
CodingStyle Ch.12 suggests that it's the other fsl arches that are in violation here, not 83XX:
---
Names of macros defining constants and labels in enums are capitalized.
#define CONSTANT 0x12345
---
Kim
PATCH 1/2 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
Quoted 9 lines · Kim Phillips
Quoted 5 lines · On Fri, 22 May 2009 17:23:24 -0500 Peter Tyser <[email protected]> wrote:
Use the standard lowercase "xx" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors
Signed-off-by Peter Tyser <[email protected]>---
Quoted 7 lines
CodingStyle Ch.12 suggests that it's the other fsl arches that are in violation here, not 83XX:
---
Names of macros defining constants and labels in enums are capitalized.#define CONSTANT
0x12345
Either way is fine with me, as long as things are consistent. It looked like most Freescale CPUs in U-Boot as well as Linux used the lowercase convention for CONFIG_<cpu type> so I thought:
a. Most likely someone made a conscious decision to use lowercase b. It'd be much easier to change just 83xx than all other arches:)
If others would prefer standardizing on uppercase, I can submit new patches for 85xx, 5xxx, 86xx, etc. This would be still be inconsistent with Linux though, which is a bit annoying.
Best,
Peter
PATCH 1/2 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
Dear Peter,
Quoted 3 lines · In message <1243192952.703.7.camel@ptyser-laptop> you wrote:
Quoted 3 lines
CodingStyle Ch.12 suggests that it's the other fsl arches that are in violation here, not 83XX:
Agreed...
Quoted 9 lines
Either way is fine with me, as long as things are consistent. It looked like most Freescale CPUs in U-Boot as well as Linux used the lowercase convention for CONFIG_<cpu type> so I thought:
a. Most likely someone made a conscious decision to use lowercase b. It'd be much easier to change just 83xx than all other arches:)If others would prefer standardizing on uppercase, I can submit new patches for 85xx, 5xxx, 86xx, etc. This would be still be inconsistent with Linux though, which is a bit annoying.
It seems Linux uses 8?xx with very few exceptions (CONFIG_SND_VIA82XX* and CONFIG_EDAC_MPC85XX), so let's do the same here.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It's certainly convenient the way the crime (or condition) of
stupidity carries with it its own punishment, automatically
admisistered without remorse, pity, or prejudice. :-)
-- Tom Christiansen in <[email protected]>Quoted 13 lines · On Sun, 24 May 2009 22:13:27 +0200 Wolfgang Denk <[email protected]> wrote:
Dear Peter,
Quoted 3 lines · In message <1243192952.703.7.camel@ptyser-laptop> you wrote:
Quoted 3 lines
CodingStyle Ch.12 suggests that it's the other fsl arches that are in violation here, not 83XX:
Agreed...
Quoted 4 lines
Either way is fine with me, as long as things are consistent. It looked like most Freescale CPUs in U-Boot as well as Linux used the lowercase convention for CONFIG_<cpu type> so I thought:
a. Most likely someone made a conscious decision to use lowercase
I can understand it in comments and quotes, just not in constants in the code.
Quoted 1 line
Quoted 1 line
b. It'd be much easier to change just 83xx than all other arches:)
that's not a good reason to do it this way though.
Quoted 6 lines
Quoted 3 lines
If others would prefer standardizing on uppercase, I can submit new patches for 85xx, 5xxx, 86xx, etc. This would be still be inconsistent with Linux though, which is a bit annoying.
It seems Linux uses 8?xx with very few exceptions (CONFIG_SND_VIA82XX* and
CONFIG_EDAC_MPC85XX), so let's do the same here.
so linux is inconsistent too.
I'm a fan of a more self-consistent CONFIG_MPC85XX_MDS over mixed-case names like linux' CONFIG_MPC85xx_MDS.
I wonder if the linux ppc guys would accept a s/CONFIG_MPC8?xx/CONFIG_MPC8?XX/g rename patch for linux...
Kim
Quoted 7 lines · On Wednesday 27 May 2009 01:38:34 Kim Phillips wrote:
Quoted 6 lines
Quoted 3 lines
If others would prefer standardizing on uppercase, I can submit new patches for 85xx, 5xxx, 86xx, etc. This would be still be inconsistent with Linux though, which is a bit annoying.
It seems Linux uses 8?xx with very few exceptions (CONFIG_SND_VIA82XX* and
CONFIG_EDAC_MPC85XX), so let's do the same here.
Quoted 7 lines
so linux is inconsistent too.
I'm a fan of a more self-consistent
CONFIG_MPC85XX_MDSover mixed-case names like linux'CONFIG_MPC85xx_MDS.I wonder if the linux ppc guys would accept a s/CONFIG_MPC8?xx/CONFIG_MPC8?XX/g rename patch for linux...
Just to add my 0.02$ as well, I prefer the lower case version CONFIG_8?xx. It's used for 4xx this way as well in Linux and U-Boot. Perhaps I'm just used to reading it this way...
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
PATCH 1/2 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
In reply to Wolfgang DenkQuoted 13 lines · On Sun, 24 May 2009 22:13:27 +0200 Wolfgang Denk <[email protected]> wrote:
Quoted 3 lines · In message <1243192952.703.7.camel@ptyser-laptop> you wrote:
Quoted 3 lines
CodingStyle Ch.12 suggests that it's the other fsl arches that are in violation here, not 83XX:
Agreed...
Quoted 6 lines
Either way is fine with me, as long as things are consistent. It looked like most Freescale CPUs in U-Boot as well as Linux used the lowercase convention for CONFIG_<cpu type> so I thought:
a. Most likely someone made a conscious decision to use lowercase b. It'd be much easier to change just 83xx than all other arches:)
Quoted 6 lines
Quoted 3 lines
If others would prefer standardizing on uppercase, I can submit new patches for 85xx, 5xxx, 86xx, etc. This would be still be inconsistent with Linux though, which is a bit annoying.
It seems Linux uses 8?xx with very few exceptions (CONFIG_SND_VIA82XX* and
CONFIG_EDAC_MPC85XX), so let's do the same here.
applied 1-2 to u-boot-mpc83xx's next branch.
reluctantly, that is. I just don't have the time to fix it myself right now.
Kim
PATCH 1/2 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
In reply to Kim PhillipsDear Kim Phillips,
Quoted 9 lines · In message <[email protected]> you wrote:
Quoted 6 lines
Use the standard lowercase "xx" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors
Signed-off-by Peter Tyser <[email protected]>---
CodingStyle Ch.12 suggests that it's the other fsl arches that are in violation here, not 83XX:
But Linux also uses CONFIG_PPC_83xx etc. ...
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Not one hundred percent efficient, of course ... but nothing ever is. -- Kirk, "Metamorphosis", stardate 3219.8