push LOAD_ADDR out to arch mk files
PATCH 1/3 push LOAD_ADDR out to arch mk files
Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in the standalone Makefile, push the setting up of LOAD_ADDR out to the arch config.mk (and rename to STANDALONE_LOAD_ADDR in the process). This keeps the common code clean and lets the arch do whatever crazy crap it wants in its own area.
--- examples/standalone/Makefile | 65 +----------------------------------------- lib_arm/config.mk | 10 ++++++ lib_avr32/config.mk | 2 + lib_blackfin/config.mk | 2 + lib_i386/config.mk | 2 + lib_m68k/config.mk | 3 ++ lib_microblaze/config.mk | 2 + lib_mips/config.mk | 2 + lib_nios/config.mk | 2 + lib_nios2/config.mk | 2 + lib_ppc/config.mk | 2 + lib_sh/config.mk | 5 +++ lib_sparc/config.mk | 2 + 13 files changed, 37 insertions(+), 64 deletions(-)
examples/standalone/Makefile +1 -64
@@ -21,65 +21,6 @@ # MA 02111-1307 USA # -ifeq ($(ARCH),ppc) -LOAD_ADDR = 0x40000 -endif - -ifeq ($(ARCH),i386) -LOAD_ADDR = 0x40000 -endif - -ifeq ($(ARCH),arm) -ifeq ($(BOARD),omap2420h4) -LOAD_ADDR = 0x80300000 -else -ifeq ($(SOC),omap3) -LOAD_ADDR = 0x80300000 -else -LOAD_ADDR = 0xc100000 -endif -endif -endif - -ifeq ($(ARCH),mips) -LOAD_ADDR = 0x80200000 -T mips.lds -endif - -ifeq ($(ARCH),nios) -LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32 -T nios.lds -endif - -ifeq ($(ARCH),nios2) -LOAD_ADDR = 0x02000000 -L $(gcclibdir) -T nios2.lds -endif - -ifeq ($(ARCH),m68k) -LOAD_ADDR = 0x20000 -L $(clibdir) -endif - -ifeq ($(ARCH),microblaze) -LOAD_ADDR = 0x80F00000 -endif - -ifeq ($(ARCH),blackfin) -LOAD_ADDR = 0x1000 -endif - -ifeq ($(ARCH),avr32) -LOAD_ADDR = 0x00000000 -endif - -ifeq ($(ARCH),sh) -LOAD_ADDR = 0x8C000000 -ifeq ($(CPU),sh2) -BIG_ENDIAN=y -endif -endif - -ifeq ($(ARCH),sparc) -LOAD_ADDR = 0x00000000 -L $(gcclibdir) -T sparc.lds -endif - include $(TOPDIR)/config.mk ELF = hello_world
@@ -139,9 +80,6 @@ SREC += eepro100_eeprom.srec BIN += eepro100_eeprom.bin endif -ifeq ($(BIG_ENDIAN),y) -EX_LDFLAGS += -EB -endif COBJS := $(SREC:.srec=.o)
@@ -164,7 +102,6 @@ BIN := $(addprefix $(obj),$(BIN)) SREC := $(addprefix $(obj),$(SREC)) gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) -clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`) CPPFLAGS += -I..
@@ -176,7 +113,7 @@ $(LIB): $(obj).depend $(LIBOBJS) $(ELF): $(obj)%: $(obj)%.o $(LIB) - $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \ + $(LD) -g -Ttext $(STANDALONE_LOAD_ADDR) \ -o $@ -e $(SYM_PREFIX)$(notdir $(<:.o=)) $< $(LIB) \ -L$(gcclibdir) -lgcc
lib_arm/config.mk +10 -0
@@ -23,6 +23,16 @@ CROSS_COMPILE ?= arm-linux- +ifeq ($(BOARD),omap2420h4) +STANDALONE_LOAD_ADDR = 0x80300000 +else +ifeq ($(SOC),omap3) +STANDALONE_LOAD_ADDR = 0x80300000 +else +STANDALONE_LOAD_ADDR = 0xc100000 +endif +endif + PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
lib_avr32/config.mk +2 -0
@@ -23,5 +23,7 @@ CROSS_COMPILE ?= avr32-linux- +STANDALONE_LOAD_ADDR = 0x00000000 + PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax PLATFORM_LDFLAGS += --relax
lib_blackfin/config.mk +2 -0
@@ -23,6 +23,8 @@ CROSS_COMPILE ?= bfin-uclinux- +STANDALONE_LOAD_ADDR = 0x1000 + CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU))) CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE))) CONFIG_ENV_OFFSET := $(strip $(subst ",,$(CONFIG_ENV_OFFSET)))
lib_i386/config.mk +2 -0
@@ -23,4 +23,6 @@ CROSS_COMPILE ?= i386-linux- +STANDALONE_LOAD_ADDR = 0x40000 + PLATFORM_CPPFLAGS += -DCONFIG_I386 -D__I386__
lib_m68k/config.mk +3 -0
@@ -23,5 +23,8 @@ CROSS_COMPILE ?= m68k-elf- +clibdir = $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`) +STANDALONE_LOAD_ADDR = 0x20000 -L $(clibdir) + PLATFORM_CPPFLAGS += -DCONFIG_M68K -D__M68K__ PLATFORM_LDFLAGS += -n
lib_microblaze/config.mk +2 -0
@@ -26,4 +26,6 @@ CROSS_COMPILE ?= mb- +STANDALONE_LOAD_ADDR = 0x80F00000 + PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__
lib_mips/config.mk +2 -0
@@ -23,6 +23,8 @@ CROSS_COMPILE ?= mips_4KC- +STANDALONE_LOAD_ADDR = 0x80200000 -T mips.lds + PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ #
lib_nios/config.mk +2 -0
@@ -24,4 +24,6 @@ CROSS_COMPILE ?= nios-elf- +STANDALONE_LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32 -T nios.lds + PLATFORM_CPPFLAGS += -m32 -DCONFIG_NIOS -D__NIOS__ -ffixed-g7 -gstabs
lib_nios2/config.mk +2 -0
@@ -24,5 +24,7 @@ CROSS_COMPILE ?= nios2-elf- +STANDALONE_LOAD_ADDR = 0x02000000 -L $(gcclibdir) -T nios2.lds + PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ PLATFORM_CPPFLAGS += -ffixed-r15 -G0
lib_ppc/config.mk +2 -0
@@ -23,6 +23,8 @@ CROSS_COMPILE ?= ppc_8xx- +STANDALONE_LOAD_ADDR = 0x40000 + PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__ PLATFORM_LDFLAGS += -n
lib_sh/config.mk +5 -0
@@ -23,6 +23,11 @@ CROSS_COMPILE ?= sh4-linux- +STANDALONE_LOAD_ADDR = 0x8C000000 +ifeq ($(CPU),sh2) +STANDALONE_LOAD_ADDR += -EB +endif + PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ PLATFORM_LDFLAGS += -e $(TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
lib_sparc/config.mk +2 -0
@@ -23,4 +23,6 @@ CROSS_COMPILE ?= sparc-elf- +STANDALONE_LOAD_ADDR = 0x00000000 -L $(gcclibdir) -T sparc.lds + PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__
Signature · 1 line
1.6.4.2
PATCH 2/3 standalone: convert to kbuild style
Clean up the arch/cpu/board/config checks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.
--- examples/standalone/Makefile | 96 ++++++++++++----------------------------- 1 files changed, 28 insertions(+), 68 deletions(-)
examples/standalone/Makefile +28 -68
@@ -23,79 +23,39 @@ include $(TOPDIR)/config.mk -ELF = hello_world -SREC = hello_world.srec -BIN = hello_world.bin - -ifeq ($(CPU),mpc8xx) -ELF += test_burst -SREC += test_burst.srec -BIN += test_burst.bin -endif - -ifeq ($(ARCH),i386) -ELF += 82559_eeprom -SREC += 82559_eeprom.srec -BIN += 82559_eeprom.bin -endif - -ifeq ($(ARCH),ppc) -ELF += sched -SREC += sched.srec -BIN += sched.bin -endif - -ifeq ($(ARCH),blackfin) -BFIN_BIN = smc91111_eeprom smc911x_eeprom -ELF += $(BFIN_BIN) -SREC += $(addsuffix .srec,$(BFIN_BIN)) -BIN += $(addsuffix .bin,$(BFIN_BIN)) -endif - -# The following example is pretty 8xx specific... -ifeq ($(CPU),mpc8xx) -ELF += timer -SREC += timer.srec -BIN += timer.bin -endif - -# The following example is 8260 specific... -ifeq ($(CPU),mpc8260) -ELF += mem_to_mem_idma2intr -SREC += mem_to_mem_idma2intr.srec -BIN += mem_to_mem_idma2intr.bin -endif - -# Demo for 52xx IRQs -ifeq ($(CPU),mpc5xxx) -ELF += interrupt -SREC += interrupt.srec -BIN += interrupt.bin -endif - -# Utility for resetting i82559 EEPROM -ifeq ($(BOARD),oxc) -ELF += eepro100_eeprom -SREC += eepro100_eeprom.srec -BIN += eepro100_eeprom.bin -endif - - -COBJS := $(SREC:.srec=.o) +ELF-$(ARCH) := +ELF-$(BOARD) := +ELF-$(CPU) := +ELF-y := hello_world + +ELF-$(CONFIG_SMC91111) += smc91111_eeprom +ELF-$(CONFIG_SMC911X) += smc911x_eeprom +ELF-i386 += 82559_eeprom +ELF-mpc5xxx += interrupt +ELF-mpc8xx += test_burst timer +ELF-mpc8260 += mem_to_mem_idma2intr +ELF-ppc += sched +ELF-oxc += eepro100_eeprom + +ELF := $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU)) +SREC = $(addsuffix .srec,$(ELF)) +BIN = $(addsuffix .bin,$(ELF)) + +COBJS := $(ELF:=.o) LIB = $(obj)libstubs.a -LIBAOBJS= -ifeq ($(ARCH),ppc) -LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o -endif -ifeq ($(CPU),mpc8xx) -LIBAOBJS+= test_burst_lib.o -endif -LIBCOBJS= stubs.o + +LIBAOBJS-$(ARCH) := +LIBAOBJS-$(CPU) := +LIBAOBJS-ppc += $(ARCH)_longjmp.o $(ARCH)_setjmp.o +LIBAOBJS-mpc8xx += test_burst_lib.o +LIBAOBJS := $(LIBAOBJS-$(ARCH)) $(LIBAOBJS-$(CPU)) + +LIBCOBJS = stubs.o LIBOBJS = $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS)) -SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S)) +SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) OBJS := $(addprefix $(obj),$(COBJS)) ELF := $(addprefix $(obj),$(ELF)) BIN := $(addprefix $(obj),$(BIN))
Signature · 1 line
1.6.4.2
PATCH 2/3 standalone: convert to kbuild style
Dear Mike Frysinger,
Quoted 7 lines · In message <[email protected]> you wrote:
Clean up the
arch/cpu/board/configchecks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.Signed-off-by Mike Frysinger <[email protected]>--- examples/standalone/Makefile | 96 ++++++++++++----------------------------- 1 files changed, 28 insertions(+), 68 deletions(-)
This does not apply any more. Please rebase and repost. Thanks in advance.
Applying: standalone: convert to kbuild style
error: patch failed: examples/standalone/Makefile:23
error: examples/standalone/Makefile: patch does not apply
fatal: sha1 information is lacking or useless (examples/standalone/Makefile). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
Patch failed at 0001.
When you have resolved this problem run "git am -i -3 --resolved". If you would prefer to skip this patch, instead run "git am -i -3 --skip". To restore the original branch and stop patching run "git am -i -3 --abort".
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "To take a significant step forward, you must make a series of finite improvements." - Donald J. Atwood, General Motors
PATCH v2 2/3 standalone: convert to kbuild style
Clean up the arch/cpu/board/config checks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.
---
v2
- update to latest master
examples/standalone/Makefile | 101 ++++++++++++------------------------------ 1 files changed, 29 insertions(+), 72 deletions(-)
examples/standalone/Makefile +29 -72
@@ -23,83 +23,40 @@ include $(TOPDIR)/config.mk -ELF = hello_world -SREC = hello_world.srec -BIN = hello_world.bin - -ELF += atmel_df_pow2 -SREC += atmel_df_pow2.srec -BIN += atmel_df_pow2.bin - -ifeq ($(CPU),mpc8xx) -ELF += test_burst -SREC += test_burst.srec -BIN += test_burst.bin -endif - -ifeq ($(ARCH),i386) -ELF += 82559_eeprom -SREC += 82559_eeprom.srec -BIN += 82559_eeprom.bin -endif - -ifeq ($(ARCH),ppc) -ELF += sched -SREC += sched.srec -BIN += sched.bin -endif - -ifeq ($(ARCH),blackfin) -BFIN_BIN = smc91111_eeprom smc911x_eeprom -ELF += $(BFIN_BIN) -SREC += $(addsuffix .srec,$(BFIN_BIN)) -BIN += $(addsuffix .bin,$(BFIN_BIN)) -endif - -# The following example is pretty 8xx specific... -ifeq ($(CPU),mpc8xx) -ELF += timer -SREC += timer.srec -BIN += timer.bin -endif - -# The following example is 8260 specific... -ifeq ($(CPU),mpc8260) -ELF += mem_to_mem_idma2intr -SREC += mem_to_mem_idma2intr.srec -BIN += mem_to_mem_idma2intr.bin -endif - -# Demo for 52xx IRQs -ifeq ($(CPU),mpc5xxx) -ELF += interrupt -SREC += interrupt.srec -BIN += interrupt.bin -endif - -# Utility for resetting i82559 EEPROM -ifeq ($(BOARD),oxc) -ELF += eepro100_eeprom -SREC += eepro100_eeprom.srec -BIN += eepro100_eeprom.bin -endif - - -COBJS := $(SREC:.srec=.o) +ELF-$(ARCH) := +ELF-$(BOARD) := +ELF-$(CPU) := +ELF-y := hello_world + +ELF-$(CONFIG_SMC91111) += smc91111_eeprom +ELF-$(CONFIG_SMC911X) += smc911x_eeprom +ELF-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2 +ELF-i386 += 82559_eeprom +ELF-mpc5xxx += interrupt +ELF-mpc8xx += test_burst timer +ELF-mpc8260 += mem_to_mem_idma2intr +ELF-ppc += sched +ELF-oxc += eepro100_eeprom + +ELF := $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU)) +SREC = $(addsuffix .srec,$(ELF)) +BIN = $(addsuffix .bin,$(ELF)) + +COBJS := $(ELF:=.o) LIB = $(obj)libstubs.a -LIBAOBJS= -ifeq ($(ARCH),ppc) -LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o -endif -ifeq ($(CPU),mpc8xx) -LIBAOBJS+= test_burst_lib.o -endif -LIBCOBJS= stubs.o + +LIBAOBJS-$(ARCH) := +LIBAOBJS-$(CPU) := +LIBAOBJS-ppc += $(ARCH)_longjmp.o $(ARCH)_setjmp.o +LIBAOBJS-mpc8xx += test_burst_lib.o +LIBAOBJS := $(LIBAOBJS-$(ARCH)) $(LIBAOBJS-$(CPU)) + +LIBCOBJS = stubs.o LIBOBJS = $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS)) -SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S)) +SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) OBJS := $(addprefix $(obj),$(COBJS)) ELF := $(addprefix $(obj),$(ELF)) BIN := $(addprefix $(obj),$(BIN))
Signature · 1 line
1.6.4.2
Wolfgang Denk
AppliedPATCH v2 2/3 standalone: convert to kbuild style
Dear Mike Frysinger,
Quoted 10 lines · In message <[email protected]> you wrote:
Clean up the
arch/cpu/board/configchecks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.Signed-off-by Mike Frysinger <[email protected]>---
v2
- update to latest masterexamples/standalone/Makefile | 101 ++++++++++++------------------------------ 1 files changed, 29 insertions(+), 72 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The connection between the language in which we think/program and the
problems and solutions we can imagine is very close. For this reason
restricting language features with the intent of eliminating pro-
grammer errors is at best dangerous.
- Bjarne Stroustrup in "The C++ Programming Language"PATCH 3/3 atmel_df_pow2: standalone to convert dataflashes to pow2
In reply to Mike FrysingerAtmel DataFlashes by default operate with pages that are slightly bigger than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 bytes). However, they also have a "power of 2" mode where the pages show up with the normal binary size. The latter mode is required in order to boot with a Blackfin processor, so many people wish to convert their DataFlashes on their development systems to this mode. This standalone application does just that.
--- examples/standalone/.gitignore | 1 + examples/standalone/Makefile | 1 + examples/standalone/atmel_df_pow2.c | 209 +++++++++++++++++++++++++++++++++++ 3 files changed, 211 insertions(+), 0 deletions(-) create mode 100644 examples/standalone/atmel_df_pow2.c
examples/standalone/.gitignore +1 -0
@@ -1,4 +1,5 @@ /82559_eeprom +/atmel_df_pow2 /hello_world /interrupt /mem_to_mem_idma2intr
examples/standalone/Makefile +1 -0
@@ -30,6 +30,7 @@ ELF-y := hello_world ELF-$(CONFIG_SMC91111) += smc91111_eeprom ELF-$(CONFIG_SMC911X) += smc911x_eeprom +ELF-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2 ELF-i386 += 82559_eeprom ELF-mpc5xxx += interrupt ELF-mpc8xx += test_burst timer
examples/standalone/atmel_df_pow2.c new file +209 -0
209 lines not on this page · raw message
Signature · 1 line
1.6.4.2
PATCH 3/3 atmel_df_pow2: standalone to convert dataflashes to pow2
Dear Mike Frysinger,
Quoted 8 lines · In message <[email protected]> you wrote:
Atmel DataFlashes by default operate with pages that are slightly bigger than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 bytes). However, they also have a "power of 2" mode where the pages show up with the normal binary size. The latter mode is required in order to boot with a Blackfin processor, so many people wish to convert their DataFlashes on their development systems to this mode. This standalone application does just that.
Quoted 7 lines
Signed-off-by Mike Frysinger <[email protected]>--- examples/standalone/.gitignore | 1 + examples/standalone/Makefile | 1 + examples/standalone/atmel_df_pow2.c | 209 +++++++++++++++++++++++++++++++++++ 3 files changed, 211 insertions(+), 0 deletions(-) create mode 100644 examples/standalone/atmel_df_pow2.c
I already applied your older patch, so this doesn't match any more. Can you please check if the cuttet TOT is ok, otherwise please post an incremental patch.
Thanks in advance.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Physician: One upon whom we set our hopes when ill and our dogs when well. - Ambrose Bierce
PATCH 3/3 atmel_df_pow2: standalone to convert dataflashes to pow2
Quoted 16 lines · On Friday 04 September 2009 17:08:49 Wolfgang Denk wrote:
Quoted 8 lines · In message Mike Frysinger
Atmel DataFlashes by default operate with pages that are slightly bigger than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 bytes). However, they also have a "power of 2" mode where the pages show up with the normal binary size. The latter mode is required in order to boot with a Blackfin processor, so many people wish to convert their DataFlashes on their development systems to this mode. This standalone application does just that.
Quoted 6 lines
Signed-off-by Mike Frysinger <[email protected]>--- examples/standalone/.gitignore | 1 + examples/standalone/Makefile | 1 + examples/standalone/atmel_df_pow2.c | 209 create mode 100644 examples/standalone/atmel_df_pow2.c
Quoted 3 lines
I already applied your older patch, so this doesn't match any more. Can you please check if the cuttet TOT is ok, otherwise please post an incremental patch.
only difference was the Makefile, but i can merge that into the previous kbuild patch
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090904/ae4c76dd/attachment.pgp
Wolfgang Denk
AppliedPATCH 1/3 push LOAD_ADDR out to arch mk files
In reply to Mike FrysingerDear Mike Frysinger,
Quoted 7 lines · In message <[email protected]> you wrote:
Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in the standalone
Makefile, push the setting up ofLOAD_ADDRout to the arch config.mk (and rename toSTANDALONE_LOAD_ADDRin the process). This keeps the common code clean and lets the arch do whatever crazy crap it wants in its own area.Signed-off-by Mike Frysinger <[email protected]>
Quoted 15 lines
--- examples/standalone/Makefile | 65 +----------------------------------------- lib_arm/config.mk | 10 ++++++ lib_avr32/config.mk | 2 + lib_blackfin/config.mk | 2 + lib_i386/config.mk | 2 + lib_m68k/config.mk | 3 ++ lib_microblaze/config.mk | 2 + lib_mips/config.mk | 2 + lib_nios/config.mk | 2 + lib_nios2/config.mk | 2 + lib_ppc/config.mk | 2 + lib_sh/config.mk | 5 +++ lib_sparc/config.mk | 2 + 13 files changed, 37 insertions(+), 64 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Vulcans never bluff. -- Spock, "The Doomsday Machine", stardate 4202.1