Skip to contentSkip to conversation

push LOAD_ADDR out to arch mk files

PATCH New Mike Frysinger 2 participants 9 messages Sep 4, 2009 – Sep 15, 2009 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 push LOAD_ADDR out to arch mk files

Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in the standalone Makefile, push the setting up of LOAD_ADDR out to the arch config.mk (and rename to STANDALONE_LOAD_ADDR in the process). This keeps the common code clean and lets the arch do whatever crazy crap it wants in its own area.

---
 examples/standalone/Makefile |   65 +-----------------------------------------
 lib_arm/config.mk            |   10 ++++++
 lib_avr32/config.mk          |    2 +
 lib_blackfin/config.mk       |    2 +
 lib_i386/config.mk           |    2 +
 lib_m68k/config.mk           |    3 ++
 lib_microblaze/config.mk     |    2 +
 lib_mips/config.mk           |    2 +
 lib_nios/config.mk           |    2 +
 lib_nios2/config.mk          |    2 +
 lib_ppc/config.mk            |    2 +
 lib_sh/config.mk             |    5 +++
 lib_sparc/config.mk          |    2 +
 13 files changed, 37 insertions(+), 64 deletions(-)
examples/standalone/Makefile +1 -64
index d2e811a..d469904 100644
@@ -21,65 +21,6 @@
 # MA 02111-1307 USA
 #
 
-ifeq ($(ARCH),ppc)
-LOAD_ADDR = 0x40000
-endif
-
-ifeq ($(ARCH),i386)
-LOAD_ADDR = 0x40000
-endif
-
-ifeq ($(ARCH),arm)
-ifeq ($(BOARD),omap2420h4)
-LOAD_ADDR = 0x80300000
-else
-ifeq ($(SOC),omap3)
-LOAD_ADDR = 0x80300000
-else
-LOAD_ADDR = 0xc100000
-endif
-endif
-endif
-
-ifeq ($(ARCH),mips)
-LOAD_ADDR = 0x80200000 -T mips.lds
-endif
-
-ifeq ($(ARCH),nios)
-LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32 -T nios.lds
-endif
-
-ifeq ($(ARCH),nios2)
-LOAD_ADDR = 0x02000000 -L $(gcclibdir) -T nios2.lds
-endif
-
-ifeq ($(ARCH),m68k)
-LOAD_ADDR = 0x20000  -L $(clibdir)
-endif
-
-ifeq ($(ARCH),microblaze)
-LOAD_ADDR = 0x80F00000
-endif
-
-ifeq ($(ARCH),blackfin)
-LOAD_ADDR = 0x1000
-endif
-
-ifeq ($(ARCH),avr32)
-LOAD_ADDR = 0x00000000
-endif
-
-ifeq ($(ARCH),sh)
-LOAD_ADDR = 0x8C000000
-ifeq ($(CPU),sh2)
-BIG_ENDIAN=y
-endif
-endif
-
-ifeq ($(ARCH),sparc)
-LOAD_ADDR = 0x00000000 -L $(gcclibdir) -T sparc.lds
-endif
-
 include $(TOPDIR)/config.mk
 
 ELF	= hello_world
@@ -139,9 +80,6 @@ SREC	+= eepro100_eeprom.srec
 BIN	+= eepro100_eeprom.bin
 endif
 
-ifeq ($(BIG_ENDIAN),y)
-EX_LDFLAGS += -EB
-endif
 
 COBJS	:= $(SREC:.srec=.o)
 
@@ -164,7 +102,6 @@ BIN	:= $(addprefix $(obj),$(BIN))
 SREC	:= $(addprefix $(obj),$(SREC))
 
 gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
-clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`)
 
 CPPFLAGS += -I..
 
@@ -176,7 +113,7 @@ $(LIB):	$(obj).depend $(LIBOBJS)
 
 $(ELF):
 $(obj)%:	$(obj)%.o $(LIB)
-		$(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
+		$(LD) -g -Ttext $(STANDALONE_LOAD_ADDR) \
 			-o $@ -e $(SYM_PREFIX)$(notdir $(<:.o=)) $< $(LIB) \
 			-L$(gcclibdir) -lgcc
 
lib_arm/config.mk +10 -0
index 705dfc3..3c078df 100644
@@ -23,6 +23,16 @@
 
 CROSS_COMPILE ?= arm-linux-
 
+ifeq ($(BOARD),omap2420h4)
+STANDALONE_LOAD_ADDR = 0x80300000
+else
+ifeq ($(SOC),omap3)
+STANDALONE_LOAD_ADDR = 0x80300000
+else
+STANDALONE_LOAD_ADDR = 0xc100000
+endif
+endif
+
 PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
 
 # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
lib_avr32/config.mk +2 -0
index c258b4b..1121ca1 100644
@@ -23,5 +23,7 @@
 
 CROSS_COMPILE ?= avr32-linux-
 
+STANDALONE_LOAD_ADDR = 0x00000000
+
 PLATFORM_RELFLAGS	+= -ffixed-r5 -fPIC -mno-init-got -mrelax
 PLATFORM_LDFLAGS	+= --relax
lib_blackfin/config.mk +2 -0
index 1267c99..3f560c9 100644
@@ -23,6 +23,8 @@
 
 CROSS_COMPILE ?= bfin-uclinux-
 
+STANDALONE_LOAD_ADDR = 0x1000
+
 CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU)))
 CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE)))
 CONFIG_ENV_OFFSET := $(strip $(subst ",,$(CONFIG_ENV_OFFSET)))
lib_i386/config.mk +2 -0
index 5fe36d5..4b990e0 100644
@@ -23,4 +23,6 @@
 
 CROSS_COMPILE ?= i386-linux-
 
+STANDALONE_LOAD_ADDR = 0x40000
+
 PLATFORM_CPPFLAGS += -DCONFIG_I386 -D__I386__
lib_m68k/config.mk +3 -0
index f41d1b3..749c389 100644
@@ -23,5 +23,8 @@
 
 CROSS_COMPILE ?= m68k-elf-
 
+clibdir = $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`)
+STANDALONE_LOAD_ADDR = 0x20000 -L $(clibdir)
+
 PLATFORM_CPPFLAGS += -DCONFIG_M68K -D__M68K__
 PLATFORM_LDFLAGS  += -n
lib_microblaze/config.mk +2 -0
index 68e7e21..c3c9f95 100644
@@ -26,4 +26,6 @@
 
 CROSS_COMPILE ?= mb-
 
+STANDALONE_LOAD_ADDR = 0x80F00000
+
 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__
lib_mips/config.mk +2 -0
index c785677..aa06761 100644
@@ -23,6 +23,8 @@
 
 CROSS_COMPILE ?= mips_4KC-
 
+STANDALONE_LOAD_ADDR = 0x80200000 -T mips.lds
+
 PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__
 
 #
lib_nios/config.mk +2 -0
index 3ed7170..d48aa6d 100644
@@ -24,4 +24,6 @@
 
 CROSS_COMPILE ?= nios-elf-
 
+STANDALONE_LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32 -T nios.lds
+
 PLATFORM_CPPFLAGS += -m32 -DCONFIG_NIOS -D__NIOS__ -ffixed-g7 -gstabs
lib_nios2/config.mk +2 -0
index 59931c2..34ee697 100644
@@ -24,5 +24,7 @@
 
 CROSS_COMPILE ?= nios2-elf-
 
+STANDALONE_LOAD_ADDR = 0x02000000 -L $(gcclibdir) -T nios2.lds
+
 PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__
 PLATFORM_CPPFLAGS += -ffixed-r15 -G0
lib_ppc/config.mk +2 -0
index d91ef7f..010d874 100644
@@ -23,6 +23,8 @@
 
 CROSS_COMPILE ?= ppc_8xx-
 
+STANDALONE_LOAD_ADDR = 0x40000
+
 PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__
 PLATFORM_LDFLAGS  += -n
 
lib_sh/config.mk +5 -0
index 67d7e9e..fa5369f 100644
@@ -23,6 +23,11 @@
 
 CROSS_COMPILE ?= sh4-linux-
 
+STANDALONE_LOAD_ADDR = 0x8C000000
+ifeq ($(CPU),sh2)
+STANDALONE_LOAD_ADDR += -EB
+endif
+
 PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
 PLATFORM_LDFLAGS += -e $(TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
 
lib_sparc/config.mk +2 -0
index 07b528c..4de6515 100644
@@ -23,4 +23,6 @@
 
 CROSS_COMPILE ?= sparc-elf-
 
+STANDALONE_LOAD_ADDR = 0x00000000 -L $(gcclibdir) -T sparc.lds
+
 PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__
Signature · 1 line
1.6.4.2
#1 lore raw

PATCH 2/3 standalone: convert to kbuild style

Clean up the arch/cpu/board/config checks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.

---
 examples/standalone/Makefile |   96 ++++++++++++-----------------------------
 1 files changed, 28 insertions(+), 68 deletions(-)
examples/standalone/Makefile +28 -68
index d469904..6c1e8b7 100644
@@ -23,79 +23,39 @@
 
 include $(TOPDIR)/config.mk
 
-ELF	= hello_world
-SREC	= hello_world.srec
-BIN	= hello_world.bin
-
-ifeq ($(CPU),mpc8xx)
-ELF	+= test_burst
-SREC	+= test_burst.srec
-BIN	+= test_burst.bin
-endif
-
-ifeq ($(ARCH),i386)
-ELF	+= 82559_eeprom
-SREC	+= 82559_eeprom.srec
-BIN	+= 82559_eeprom.bin
-endif
-
-ifeq ($(ARCH),ppc)
-ELF	+= sched
-SREC	+= sched.srec
-BIN	+= sched.bin
-endif
-
-ifeq ($(ARCH),blackfin)
-BFIN_BIN = smc91111_eeprom smc911x_eeprom
-ELF	+= $(BFIN_BIN)
-SREC	+= $(addsuffix .srec,$(BFIN_BIN))
-BIN	+= $(addsuffix .bin,$(BFIN_BIN))
-endif
-
-# The following example is pretty 8xx specific...
-ifeq ($(CPU),mpc8xx)
-ELF	+= timer
-SREC	+= timer.srec
-BIN	+= timer.bin
-endif
-
-# The following example is 8260 specific...
-ifeq ($(CPU),mpc8260)
-ELF	+= mem_to_mem_idma2intr
-SREC	+= mem_to_mem_idma2intr.srec
-BIN	+= mem_to_mem_idma2intr.bin
-endif
-
-# Demo for 52xx IRQs
-ifeq ($(CPU),mpc5xxx)
-ELF	+= interrupt
-SREC	+= interrupt.srec
-BIN	+= interrupt.bin
-endif
-
-# Utility for resetting i82559 EEPROM
-ifeq ($(BOARD),oxc)
-ELF	+= eepro100_eeprom
-SREC	+= eepro100_eeprom.srec
-BIN	+= eepro100_eeprom.bin
-endif
-
-
-COBJS	:= $(SREC:.srec=.o)
+ELF-$(ARCH)  :=
+ELF-$(BOARD) :=
+ELF-$(CPU)   :=
+ELF-y        := hello_world
+
+ELF-$(CONFIG_SMC91111)           += smc91111_eeprom
+ELF-$(CONFIG_SMC911X)            += smc911x_eeprom
+ELF-i386                         += 82559_eeprom
+ELF-mpc5xxx                      += interrupt
+ELF-mpc8xx                       += test_burst timer
+ELF-mpc8260                      += mem_to_mem_idma2intr
+ELF-ppc                          += sched
+ELF-oxc                          += eepro100_eeprom
+
+ELF := $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU))
+SREC = $(addsuffix .srec,$(ELF))
+BIN  = $(addsuffix .bin,$(ELF))
+
+COBJS	:= $(ELF:=.o)
 
 LIB	= $(obj)libstubs.a
-LIBAOBJS=
-ifeq ($(ARCH),ppc)
-LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o
-endif
-ifeq ($(CPU),mpc8xx)
-LIBAOBJS+= test_burst_lib.o
-endif
-LIBCOBJS= stubs.o
+
+LIBAOBJS-$(ARCH)     :=
+LIBAOBJS-$(CPU)      :=
+LIBAOBJS-ppc         += $(ARCH)_longjmp.o $(ARCH)_setjmp.o
+LIBAOBJS-mpc8xx      += test_burst_lib.o
+LIBAOBJS := $(LIBAOBJS-$(ARCH)) $(LIBAOBJS-$(CPU))
+
+LIBCOBJS = stubs.o
 
 LIBOBJS	= $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS))
 
-SRCS	:= $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S))
+SRCS	:= $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 ELF	:= $(addprefix $(obj),$(ELF))
 BIN	:= $(addprefix $(obj),$(BIN))
Signature · 1 line
1.6.4.2
#2 lore raw

PATCH 2/3 standalone: convert to kbuild style

Dear Mike Frysinger,

Quoted 7 lines · In message <[email protected]> you wrote:

Clean up the arch/cpu/board/config checks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.

---
 examples/standalone/Makefile |   96 ++++++++++++-----------------------------
 1 files changed, 28 insertions(+), 68 deletions(-)

This does not apply any more. Please rebase and repost. Thanks in advance.

Applying: standalone: convert to kbuild style
error: patch failed: examples/standalone/Makefile:23
error: examples/standalone/Makefile: patch does not apply
fatal: sha1 information is lacking or useless (examples/standalone/Makefile). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
Patch failed at 0001.
When you have resolved this problem run "git am -i -3 --resolved". If you would prefer to skip this patch, instead run "git am -i -3 --skip". To restore the original branch and stop patching run "git am -i -3 --abort".

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"To take a significant step forward, you must make a series of finite
improvements." - Donald J. Atwood, General Motors
#3 lore raw

PATCH v2 2/3 standalone: convert to kbuild style

Clean up the arch/cpu/board/config checks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.

---
v2
- update to latest master

 examples/standalone/Makefile |  101 ++++++++++++------------------------------
 1 files changed, 29 insertions(+), 72 deletions(-)
examples/standalone/Makefile +29 -72
index bc98120..5e2f2bc 100644
@@ -23,83 +23,40 @@
 
 include $(TOPDIR)/config.mk
 
-ELF	= hello_world
-SREC	= hello_world.srec
-BIN	= hello_world.bin
-
-ELF	+= atmel_df_pow2
-SREC	+= atmel_df_pow2.srec
-BIN	+= atmel_df_pow2.bin
-
-ifeq ($(CPU),mpc8xx)
-ELF	+= test_burst
-SREC	+= test_burst.srec
-BIN	+= test_burst.bin
-endif
-
-ifeq ($(ARCH),i386)
-ELF	+= 82559_eeprom
-SREC	+= 82559_eeprom.srec
-BIN	+= 82559_eeprom.bin
-endif
-
-ifeq ($(ARCH),ppc)
-ELF	+= sched
-SREC	+= sched.srec
-BIN	+= sched.bin
-endif
-
-ifeq ($(ARCH),blackfin)
-BFIN_BIN = smc91111_eeprom smc911x_eeprom
-ELF	+= $(BFIN_BIN)
-SREC	+= $(addsuffix .srec,$(BFIN_BIN))
-BIN	+= $(addsuffix .bin,$(BFIN_BIN))
-endif
-
-# The following example is pretty 8xx specific...
-ifeq ($(CPU),mpc8xx)
-ELF	+= timer
-SREC	+= timer.srec
-BIN	+= timer.bin
-endif
-
-# The following example is 8260 specific...
-ifeq ($(CPU),mpc8260)
-ELF	+= mem_to_mem_idma2intr
-SREC	+= mem_to_mem_idma2intr.srec
-BIN	+= mem_to_mem_idma2intr.bin
-endif
-
-# Demo for 52xx IRQs
-ifeq ($(CPU),mpc5xxx)
-ELF	+= interrupt
-SREC	+= interrupt.srec
-BIN	+= interrupt.bin
-endif
-
-# Utility for resetting i82559 EEPROM
-ifeq ($(BOARD),oxc)
-ELF	+= eepro100_eeprom
-SREC	+= eepro100_eeprom.srec
-BIN	+= eepro100_eeprom.bin
-endif
-
-
-COBJS	:= $(SREC:.srec=.o)
+ELF-$(ARCH)  :=
+ELF-$(BOARD) :=
+ELF-$(CPU)   :=
+ELF-y        := hello_world
+
+ELF-$(CONFIG_SMC91111)           += smc91111_eeprom
+ELF-$(CONFIG_SMC911X)            += smc911x_eeprom
+ELF-$(CONFIG_SPI_FLASH_ATMEL)    += atmel_df_pow2
+ELF-i386                         += 82559_eeprom
+ELF-mpc5xxx                      += interrupt
+ELF-mpc8xx                       += test_burst timer
+ELF-mpc8260                      += mem_to_mem_idma2intr
+ELF-ppc                          += sched
+ELF-oxc                          += eepro100_eeprom
+
+ELF := $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU))
+SREC = $(addsuffix .srec,$(ELF))
+BIN  = $(addsuffix .bin,$(ELF))
+
+COBJS	:= $(ELF:=.o)
 
 LIB	= $(obj)libstubs.a
-LIBAOBJS=
-ifeq ($(ARCH),ppc)
-LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o
-endif
-ifeq ($(CPU),mpc8xx)
-LIBAOBJS+= test_burst_lib.o
-endif
-LIBCOBJS= stubs.o
+
+LIBAOBJS-$(ARCH)     :=
+LIBAOBJS-$(CPU)      :=
+LIBAOBJS-ppc         += $(ARCH)_longjmp.o $(ARCH)_setjmp.o
+LIBAOBJS-mpc8xx      += test_burst_lib.o
+LIBAOBJS := $(LIBAOBJS-$(ARCH)) $(LIBAOBJS-$(CPU))
+
+LIBCOBJS = stubs.o
 
 LIBOBJS	= $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS))
 
-SRCS	:= $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S))
+SRCS	:= $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 ELF	:= $(addprefix $(obj),$(ELF))
 BIN	:= $(addprefix $(obj),$(BIN))
Signature · 1 line
1.6.4.2
#4 lore raw

PATCH v2 2/3 standalone: convert to kbuild style

Dear Mike Frysinger,

Quoted 10 lines · In message <[email protected]> you wrote:

Clean up the arch/cpu/board/config checks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style.

---
v2
- update to latest master

 examples/standalone/Makefile |  101 ++++++++++++------------------------------
 1 files changed, 29 insertions(+), 72 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 8 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The connection between the language in which we think/program and the
problems and solutions we can imagine is very close. For this  reason
restricting  language  features  with  the intent of eliminating pro-
grammer errors is at best dangerous.
               - Bjarne Stroustrup in "The  C++ Programming Language"
#5 lore raw

PATCH 3/3 atmel_df_pow2: standalone to convert dataflashes to pow2

In reply to Mike Frysinger

Atmel DataFlashes by default operate with pages that are slightly bigger than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 bytes). However, they also have a "power of 2" mode where the pages show up with the normal binary size. The latter mode is required in order to boot with a Blackfin processor, so many people wish to convert their DataFlashes on their development systems to this mode. This standalone application does just that.

---
 examples/standalone/.gitignore      |    1 +
 examples/standalone/Makefile        |    1 +
 examples/standalone/atmel_df_pow2.c |  209 +++++++++++++++++++++++++++++++++++
 3 files changed, 211 insertions(+), 0 deletions(-)
 create mode 100644 examples/standalone/atmel_df_pow2.c
examples/standalone/.gitignore +1 -0
index 0d1864c..7b783fc 100644
@@ -1,4 +1,5 @@
 /82559_eeprom
+/atmel_df_pow2
 /hello_world
 /interrupt
 /mem_to_mem_idma2intr
examples/standalone/Makefile +1 -0
index 6c1e8b7..5e2f2bc 100644
@@ -30,6 +30,7 @@ ELF-y        := hello_world
 
 ELF-$(CONFIG_SMC91111)           += smc91111_eeprom
 ELF-$(CONFIG_SMC911X)            += smc911x_eeprom
+ELF-$(CONFIG_SPI_FLASH_ATMEL)    += atmel_df_pow2
 ELF-i386                         += 82559_eeprom
 ELF-mpc5xxx                      += interrupt
 ELF-mpc8xx                       += test_burst timer
examples/standalone/atmel_df_pow2.c new file +209 -0

209 lines not on this page · raw message

Signature · 1 line
1.6.4.2
#6 lore raw

PATCH 3/3 atmel_df_pow2: standalone to convert dataflashes to pow2

Dear Mike Frysinger,

Quoted 8 lines · In message <[email protected]> you wrote:

Atmel DataFlashes by default operate with pages that are slightly bigger than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 bytes). However, they also have a "power of 2" mode where the pages show up with the normal binary size. The latter mode is required in order to boot with a Blackfin processor, so many people wish to convert their DataFlashes on their development systems to this mode. This standalone application does just that.

Quoted 7 lines
---
 examples/standalone/.gitignore      |    1 +
 examples/standalone/Makefile        |    1 +
 examples/standalone/atmel_df_pow2.c |  209 +++++++++++++++++++++++++++++++++++
 3 files changed, 211 insertions(+), 0 deletions(-)
 create mode 100644 examples/standalone/atmel_df_pow2.c

I already applied your older patch, so this doesn't match any more. Can you please check if the cuttet TOT is ok, otherwise please post an incremental patch.

Thanks in advance.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Physician: One upon whom we set our hopes when ill and our dogs  when
well.                                                - Ambrose Bierce
#7 lore raw

PATCH 3/3 atmel_df_pow2: standalone to convert dataflashes to pow2

Quoted 16 lines · On Friday 04 September 2009 17:08:49 Wolfgang Denk wrote:
Quoted 8 lines · In message Mike Frysinger

Atmel DataFlashes by default operate with pages that are slightly bigger than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 bytes). However, they also have a "power of 2" mode where the pages show up with the normal binary size. The latter mode is required in order to boot with a Blackfin processor, so many people wish to convert their DataFlashes on their development systems to this mode. This standalone application does just that.

Quoted 6 lines
---
 examples/standalone/.gitignore      |    1 +
 examples/standalone/Makefile        |    1 +
 examples/standalone/atmel_df_pow2.c |  209
 create mode 100644 examples/standalone/atmel_df_pow2.c
Quoted 3 lines

I already applied your older patch, so this doesn't match any more. Can you please check if the cuttet TOT is ok, otherwise please post an incremental patch.

only difference was the Makefile, but i can merge that into the previous kbuild patch
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090904/ae4c76dd/attachment.pgp

#8 lore raw

PATCH 1/3 push LOAD_ADDR out to arch mk files

In reply to Mike Frysinger

Dear Mike Frysinger,

Quoted 7 lines · In message <[email protected]> you wrote:

Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in the standalone Makefile, push the setting up of LOAD_ADDR out to the arch config.mk (and rename to STANDALONE_LOAD_ADDR in the process). This keeps the common code clean and lets the arch do whatever crazy crap it wants in its own area.

Quoted 15 lines
---
 examples/standalone/Makefile |   65 +-----------------------------------------
 lib_arm/config.mk            |   10 ++++++
 lib_avr32/config.mk          |    2 +
 lib_blackfin/config.mk       |    2 +
 lib_i386/config.mk           |    2 +
 lib_m68k/config.mk           |    3 ++
 lib_microblaze/config.mk     |    2 +
 lib_mips/config.mk           |    2 +
 lib_nios/config.mk           |    2 +
 lib_nios2/config.mk          |    2 +
 lib_ppc/config.mk            |    2 +
 lib_sh/config.mk             |    5 +++
 lib_sparc/config.mk          |    2 +
 13 files changed, 37 insertions(+), 64 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Vulcans never bluff.
	-- Spock, "The Doomsday Machine", stardate 4202.1