omap3: add CM-T35 board
PATCH 1/1 omap3: add CM-T35 board
Add CM-T35 board support
--- Makefile | 3 + board/cm-t35/Makefile | 47 ++++++ board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++ board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++ board/cm-t35/config.mk | 30 ++++ include/configs/omap3_cm-t35.h | 301 ++++++++++++++++++++++++++++++++++++++++ 6 files changed, 750 insertions(+), 0 deletions(-) create mode 100644 board/cm-t35/Makefile create mode 100644 board/cm-t35/cm-t35.c create mode 100644 board/cm-t35/cm-t35.h create mode 100644 board/cm-t35/config.mk create mode 100755 include/configs/omap3_cm-t35.h
Makefile +3 -0
@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 + smdkc100_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
board/cm-t35/Makefile new file +47 -0
47 lines not on this page · raw message
board/cm-t35/cm-t35.c new file +196 -0
196 lines not on this page · raw message
board/cm-t35/cm-t35.h new file +173 -0
173 lines not on this page · raw message
board/cm-t35/config.mk new file +30 -0
@@ -0,0 +1,30 @@ +# +# (C) Copyright 2009 +# CompuLab, Ltd., <www.compulab.co.il> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000
include/configs/omap3_cm-t35.h new file +301 -0
301 lines not on this page · raw message
Signature · 1 line
1.6.0.6
Paulraj
PATCH 1/1 omap3: add CM-T35 board
Quoted 12 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 boardAdd CM-T35 board support
Quoted 8 lines
Signed-off-by Mike Rapoport <[email protected]>--- Makefile | 3 + board/cm-t35/Makefile | 47 ++++++ board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++ board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++ board/cm-t35/config.mk | 30 ++++ include/configs/omap3_cm-t35.h | 301
If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/
It has beagle, sdp, etc
Quoted 7 lines
++++++++++++++++++++++++++++++++++++++++
6 files changed, 750 insertions(+), 0 deletions(-) create mode 100644 board/cm-t35/Makefile create mode 100644 board/cm-t35/cm-t35.c create mode 100644 board/cm-t35/cm-t35.h create mode 100644 board/cm-t35/config.mk create mode 100755 include/configs/omap3_cm-t35.h
You also need entries to MAKEALL and MAINTAINERS
Quoted 542 lines
Makefile +3
-0@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 + smdkc100_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xxboard/cm-t35/Makefile new file +47
-0@@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := cm-t35.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).dependboard/cm-t35/cm-t35.c new file +64
-0@@ -0,0 +1,196 @@ +/* +* (C) Copyright 2009 +* CompuLab, Ltd. <www.compulab.co.il> +* +* Authors : +* Igor Vaisbein <[email protected]> +* Mike Rapoport <[email protected]> +* +* Derived from omap3evm and Beagle Board by +* Manikandan Pillai <[email protected]> +* Richard Woodruff <[email protected]> +* Syed Mohammed Khasim <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <netdev.h> +#include <net.h> +#include <i2c.h> +#include <twl4030.h> + +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> + +#include "cm-t35.h" + +#define CM_T35_SMC911X_BASE 0x2C000000 +#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + SZ_16M) + +static u32 gpmc_net_config[GPMC_MAX_REG ] = { +NET_GPMC_CONFIG1 , +NET_GPMC_CONFIG2 , +NET_GPMC_CONFIG3 , +NET_GPMC_CONFIG4 , +NET_GPMC_CONFIG5 , +NET_GPMC_CONFIG6 , +0 +}; + +DECLARE_GLOBAL_DATA_PTR ; + +/* +* Routine: setup_net_chip +* Description: Setting up the configuration GPMC registers specific to the
+ * Ethernet hardware.
+ */board/cm-t35/cm-t35.c new file +74
-0+static void setup_net_chip (void ) +{ +struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE ; + +enable_gpmc_cs_config (gpmc_net_config, &gpmc_cfg->cs[5 ], +CM_T35_SMC911X_BASE ,GPMC_SIZE_16M ); +enable_gpmc_cs_config (gpmc_net_config, &gpmc_cfg->cs[4 ], +SB_T35_SMC911X_BASE ,GPMC_SIZE_16M ); + +/* Enable off mode for NWE in PADCONF_GPMC_NWE register */ +writew (readw (&ctrl_base->gpmc_nwe) |0x0E00 , &ctrl_base->gpmc_nwe); + +/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ +writew (readw (&ctrl_base->gpmc_noe) |0x0E00 , &ctrl_base->gpmc_noe); + +/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ +writew (readw (&ctrl_base->gpmc_nadv_ale) |0x0E00 , + &ctrl_base->gpmc_nadv_ale); + +/* Reset the ethernet controller via TPS65930 GPIO */ +/* Set GPIO1 of TPS65930 as output */ +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x03 ); +/* Send a pulse on the GPIO pin */ +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x0C ); +udelay (1 ); +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x09 ); +udelay (1 ); +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x0C ); + +} + +/* +* Routine: board_init +* Description: Early hardware init. +*/ +int board_init (void ) +{ +gpmc_init ();/* in SRAM or SDRAM, finish GPMC */ + +/* board id for Linux */ + gd->bd->bi_arch_number =MACH_TYPE_CM_T35 ; +/* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 +0x100 ); + +return 0 ; +} + +/* +* Routine: misc_init_r +* Description: Init ethernet (done here so udelay works) +*/ +int misc_init_r (void ) +{ + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C +i2c_init (CONFIG_SYS_I2C_SPEED ,CONFIG_SYS_I2C_SLAVE ); +#endif + +#if defined(CONFIG_CMD_NET ) +setup_net_chip (); +#endif + +dieid_num_r (); + +return 0 ; +} + +/* +* Routine: set_muxconf_regs +* Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */board/cm-t35/cm-t35.c new file +53
-0+void set_muxconf_regs (void ) +{ +MUX_CM_T35 (); +} + +/* +* Routine: handle_mac_address +* Description: prepare MAC address for on-board Ethernet. +*/ +static int handle_mac_address (void ) +{ +unsigned char enetaddr[6 ]; +int rc; + + rc =eth_getenv_enetaddr ("ethaddr" , enetaddr); +if (rc) +return 0 ; + + rc =i2c_read (0x50 ,0 ,1 , enetaddr,6 ); +if (rc) +return rc; + +if (!is_valid_ether_addr (enetaddr)) +return -1 ; + +return eth_setenv_enetaddr ("ethaddr" , enetaddr); +} + +/* +* Routine: board_eth_init +* Description: initialize module and base-board Ethernet chips +*/ +int board_eth_init (bd_t *bis) +{ +int err1 =0 , err2 =0 ; + +#ifdef CONFIG_SMC911X + err1 =handle_mac_address (); + err2 =smc911x_initialize (0 ,CM_T35_SMC911X_BASE ); + +if (err1 && !err2) +printf ("CM-T35: No MAC address found\n" ); + + err1 =smc911x_initialize (1 ,SB_T35_SMC911X_BASE ); + +/* run eth_init to set up MAC address prior to OS boot */ +if (!err1 || !err2) + err1 =eth_init (bis); +else + err1 =-1 ; +#endif +return err1; +}board/cm-t35/cm-t35.h new file +81
-0@@ -0,0 +1,173 @@ +/* +* (C) Copyright 2009 CompuLab, Ltd +* Authors: +* Igor Vaisbein <[email protected]> +* Mike Rapoport <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#ifndef _CM_T35_H_ +#define _CM_T35_H_ + +const omap3_sysinfo sysinfo = { +DDR_DISCRETE , +"CM-T35 board" , +"NAND" , +}; + +/* static void setup_net_chip(void); */ + +/* +* IEN - Input Enable +* IDIS - Input Disable +* PTD - Pull type Down +* PTU - Pull type Up +* DIS - Pull type selection is inactive +* EN - Pull type selection is active +* M0 - Mode 0 +* The commented string gives the final mux configuration for that pin +*/ +#define MUX_CM_T35 () \ +/*SDRC*/ \ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))/*SDRC_D0*/ \ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ +MUX_VAL (CP (SDRC_DQS0 ), (IEN |PTD |DIS |M0 ))/*SDRC_DQS0*/\
+MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
/*SDRC_DQS1*/\
+MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
/*SDRC_DQS2*/\
+MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
/*SDRC_DQS3*/\
+ /*GPMC*/\+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0))/*GPMC_nCS0*/\
+/* SB-T35 Ethernet */\
+MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0))
/*GPMC_nCS4*/\
+/* CM-T35 Ethernet */\
+MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0))
/*GPMC_nCS5*/\
+MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4))/*GPIO_59*/\
+MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0))/*GPMC_nADV_ALE*/\+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0))/*DSS_HSYNC*/\
+MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
/*DSS_VSYNC*/\
+MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0))/*DSS_ACBIAS*/\
+MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
/*DSS_DATA0*/\
+MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
/*DSS_DATA1*/\
+MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
/*DSS_DATA2*/\
+MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
/*DSS_DATA3*/\
+MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
/*DSS_DATA4*/\
+MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
/*DSS_DATA5*/\
+MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
/*DSS_DATA6*/\
+MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
/*DSS_DATA7*/\
+MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
/*DSS_DATA8*/\
+MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
/*DSS_DATA9*/\+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /*Serial Interface*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\+ /*Control and debug */\
+MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))/*SYS_32K*/\
+MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))/*SYS_CLKREQ*/\
+MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0))/*SYS_nIRQ*/\+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))/*sdrc_cke0*/\
+MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
/*sdrc_cke1*/\board/cm-t35/cm-t35.h new file +2
-0+ +#endif board/cm-t35/config.mk new file +30
-0@@ -0,0 +1,30 @@ +# +# (C) Copyright 2009 +# CompuLab, Ltd., <www.compulab.co.il> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000include/configs/omap3_cm- renamed from include/configs/omap3_cm-t35.h +0
-0
t35.h
new file mode 100755
index 0000000..0fbb62finclude/configs/omap3_cm-t35.h new file +26
-0@@ -0,0 +1,301 @@ +/* +* (C) Copyright 2009 CompuLab, Ltd. +* +* Authors : +* Igor Vaisbein <[email protected]> +* Mike Rapoport <[email protected]> +* +* Derived from omap3evm and Beagle Board by +* Manikandan Pillai <[email protected]> +* Richard Woodruff <[email protected]> +* Syed Mohammed Khasim <[email protected]> +* +* Configuration settings for the CompuLab CM-T35 board. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details.
include/configs/omap3_cm-t35.h line 36
Quoted 10 lines
include/configs/omap3_cm-t35.h new file +10
-0+* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h>
Please take a look at the latest config files. We have got rid of this.
http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=9c44ddccb6602f620fc037974f3e4468ad8a7c0c
Quoted 275 lines
include/configs/omap3_cm-t35.h new file +28
-0+ +/* High Level Configuration Options */ +#define CONFIG_ARMCORTEXA8 1/* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1/* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1/* which is a 34XX */ +#define CONFIG_OMAP3430 1/* which is in a 3430 */ +#define CONFIG_CM_T35 1/* working with CM_T35 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000/* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ/* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* Size of malloc() pool */ +#define CONFIG_ENV_SIZE SZ_128K/* Total Size Environment */
include/configs/omap3_cm-t35.h new file +183
-0+/* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_512K) +#define CONFIG_SYS_GBL_DATA_SIZE 128/* bytes reserved for */ +/* initial data */ +/* NS16550 Configuration */ +#define V_NS16550_CLK 48000000/* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* serial console configuration */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3/* UART3 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */ +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH/* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA/* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS/* List all found images */ + +#define CONFIG_SYS_NO_FLASH + +/* I2C */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* TWL4030 */ +#define CONFIG_TWL4030_POWER 1 + +/* Board NAND Info. */ +#define CONFIG_NAND_OMAP_GPMC 1 +#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 +#define OMAP34XX_GPMC_NAND_SMNAND 1 + +#define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ +/* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE/* physical address */ +/* to access */ +/* nand at CS0 */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of */ +/* NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +/* JFFS2 */ +#define CONFIG_JFFS2_NAND +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +/* ubi/ubifs related definitions */ +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "baudrate=115200\0"\ + "console=ttyS2,115200n8\0" \ + "autoload=no\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "onenand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \ + "1920k(u-boot)," \ + "256k(env)," \ + "4m(kernel)," \ + "-(fs)," + +#define CONFIG_AUTO_COMPLETE 1 +/* +* Miscellaneous configurable options +*/ +#define V_PROMPT "CM-T35 # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16/* max number of command */ +/* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000) + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)/* default load */ +/* address */ + +/* +* OMAP3 has 12 GP timers, they can be driven by the system clock +* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). +* This rate is divided by a local divisor. +*/ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* +* Stack sizes +* +* The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE SZ_128K/* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K/* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K/* FIQ stack */ +#endif + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1/* CS1 may not be populated on CM-T35 */
include/configs/omap3_cm-t35.h new file +14
-0+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M/* at least 32 meg */ + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/* PISMO support */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520/* max number of sectors */ +/* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2/* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN SZ_256K/* Reserve 2 sectors */
include/configs/omap3_cm-t35.h new file +40
-1+ +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_IS_IN_NAND 1 + +/* environment */ +#define SMNAND_ENV_OFFSET 0x260000/* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR boot_flash_env_addr + +#ifndef __ASSEMBLY__ +extern struct gpmc *gpmc_cfg; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +/* SMSC9220 Ethernet */ +#if defined(CONFIG_CMD_NET ) +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#endif /* (CONFIG_CMD_NET) */ + +/* BOOTP fields */ +#define CONFIG_BOOTP_SUBNETMASK 0x00000001 +#define CONFIG_BOOTP_GATEWAY 0x00000002 +#define CONFIG_BOOTP_HOSTNAME 0x00000004 +#define CONFIG_BOOTP_BOOTPATH 0x00000010 + +#define CONFIG_OMAP3_GPIO_6 1 + +#endif /* __CONFIG_H */ --1.6.0.6
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH 1/1 omap3: add CM-T35 board
Quoted 20 lines · Sandeep
Quoted 11 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 boardAdd CM-T35 board support
Quoted 8 lines
Signed-off-by Mike Rapoport <[email protected]>--- Makefile | 3 + board/cm-t35/Makefile | 47 ++++++ board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++ board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++ board/cm-t35/config.mk | 30 ++++ include/configs/omap3_cm-t35.h | 301
Quoted 4 lines
If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/It has beagle, sdp, etc
As far as I know, U-Boot structures board files by board/vendor/board rather than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/, just like overo.
Quoted 9 lines
Quoted 7 lines
++++++++++++++++++++++++++++++++++++++++
6 files changed, 750 insertions(+), 0 deletions(-) create mode 100644 board/cm-t35/Makefile create mode 100644 board/cm-t35/cm-t35.c create mode 100644 board/cm-t35/cm-t35.h create mode 100644 board/cm-t35/config.mk create mode 100755 include/configs/omap3_cm-t35.hYou also need entries to MAKEALL and
MAINTAINERS
Ok, will add.
Quoted 555 lines
Quoted 541 lines
Makefile +3
-0@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 + smdkc100_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xxboard/cm-t35/Makefile new file +47
-0@@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := cm-t35.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).dependboard/cm-t35/cm-t35.c new file +64
-0@@ -0,0 +1,196 @@ +/* +* (C) Copyright 2009 +* CompuLab, Ltd. <www.compulab.co.il> +* +* Authors : +* Igor Vaisbein <[email protected]> +* Mike Rapoport <[email protected]> +* +* Derived from omap3evm and Beagle Board by +* Manikandan Pillai <[email protected]> +* Richard Woodruff <[email protected]> +* Syed Mohammed Khasim <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <netdev.h> +#include <net.h> +#include <i2c.h> +#include <twl4030.h> + +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> + +#include "cm-t35.h" + +#define CM_T35_SMC911X_BASE 0x2C000000 +#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + SZ_16M) + +static u32 gpmc_net_config[GPMC_MAX_REG ] = { +NET_GPMC_CONFIG1 , +NET_GPMC_CONFIG2 , +NET_GPMC_CONFIG3 , +NET_GPMC_CONFIG4 , +NET_GPMC_CONFIG5 , +NET_GPMC_CONFIG6 , +0 +}; + +DECLARE_GLOBAL_DATA_PTR ; + +/* +* Routine: setup_net_chip +* Description: Setting up the configuration GPMC registers specific to the
+ * Ethernet hardware.
+ */board/cm-t35/cm-t35.c new file +74
-0+static void setup_net_chip (void ) +{ +struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE ; + +enable_gpmc_cs_config (gpmc_net_config, &gpmc_cfg->cs[5 ], +CM_T35_SMC911X_BASE ,GPMC_SIZE_16M ); +enable_gpmc_cs_config (gpmc_net_config, &gpmc_cfg->cs[4 ], +SB_T35_SMC911X_BASE ,GPMC_SIZE_16M ); + +/* Enable off mode for NWE in PADCONF_GPMC_NWE register */ +writew (readw (&ctrl_base->gpmc_nwe) |0x0E00 , &ctrl_base->gpmc_nwe); + +/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ +writew (readw (&ctrl_base->gpmc_noe) |0x0E00 , &ctrl_base->gpmc_noe); + +/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ +writew (readw (&ctrl_base->gpmc_nadv_ale) |0x0E00 , + &ctrl_base->gpmc_nadv_ale); + +/* Reset the ethernet controller via TPS65930 GPIO */ +/* Set GPIO1 of TPS65930 as output */ +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x03 ); +/* Send a pulse on the GPIO pin */ +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x0C ); +udelay (1 ); +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x09 ); +udelay (1 ); +twl4030_i2c_write_u8 (TWL4030_CHIP_GPIO ,0x02 , +TWL4030_BASEADD_GPIO +0x0C ); + +} + +/* +* Routine: board_init +* Description: Early hardware init. +*/ +int board_init (void ) +{ +gpmc_init ();/* in SRAM or SDRAM, finish GPMC */ + +/* board id for Linux */ + gd->bd->bi_arch_number =MACH_TYPE_CM_T35 ; +/* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 +0x100 ); + +return 0 ; +} + +/* +* Routine: misc_init_r +* Description: Init ethernet (done here so udelay works) +*/ +int misc_init_r (void ) +{ + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C +i2c_init (CONFIG_SYS_I2C_SPEED ,CONFIG_SYS_I2C_SLAVE ); +#endif + +#if defined(CONFIG_CMD_NET ) +setup_net_chip (); +#endif + +dieid_num_r (); + +return 0 ; +} + +/* +* Routine: set_muxconf_regs +* Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */board/cm-t35/cm-t35.c new file +53
-0+void set_muxconf_regs (void ) +{ +MUX_CM_T35 (); +} + +/* +* Routine: handle_mac_address +* Description: prepare MAC address for on-board Ethernet. +*/ +static int handle_mac_address (void ) +{ +unsigned char enetaddr[6 ]; +int rc; + + rc =eth_getenv_enetaddr ("ethaddr" , enetaddr); +if (rc) +return 0 ; + + rc =i2c_read (0x50 ,0 ,1 , enetaddr,6 ); +if (rc) +return rc; + +if (!is_valid_ether_addr (enetaddr)) +return -1 ; + +return eth_setenv_enetaddr ("ethaddr" , enetaddr); +} + +/* +* Routine: board_eth_init +* Description: initialize module and base-board Ethernet chips +*/ +int board_eth_init (bd_t *bis) +{ +int err1 =0 , err2 =0 ; + +#ifdef CONFIG_SMC911X + err1 =handle_mac_address (); + err2 =smc911x_initialize (0 ,CM_T35_SMC911X_BASE ); + +if (err1 && !err2) +printf ("CM-T35: No MAC address found\n" ); + + err1 =smc911x_initialize (1 ,SB_T35_SMC911X_BASE ); + +/* run eth_init to set up MAC address prior to OS boot */ +if (!err1 || !err2) + err1 =eth_init (bis); +else + err1 =-1 ; +#endif +return err1; +}board/cm-t35/cm-t35.h new file +81
-0@@ -0,0 +1,173 @@ +/* +* (C) Copyright 2009 CompuLab, Ltd +* Authors: +* Igor Vaisbein <[email protected]> +* Mike Rapoport <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#ifndef _CM_T35_H_ +#define _CM_T35_H_ + +const omap3_sysinfo sysinfo = { +DDR_DISCRETE , +"CM-T35 board" , +"NAND" , +}; + +/* static void setup_net_chip(void); */ + +/* +* IEN - Input Enable +* IDIS - Input Disable +* PTD - Pull type Down +* PTU - Pull type Up +* DIS - Pull type selection is inactive +* EN - Pull type selection is active +* M0 - Mode 0 +* The commented string gives the final mux configuration for that pin +*/ +#define MUX_CM_T35 () \ +/*SDRC*/ \ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))/*SDRC_D0*/ \ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ +MUX_VAL (CP (SDRC_DQS0 ), (IEN |PTD |DIS |M0 ))/*SDRC_DQS0*/\
+MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
/*SDRC_DQS1*/\
+MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
/*SDRC_DQS2*/\
+MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
/*SDRC_DQS3*/\
+ /*GPMC*/\+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0))/*GPMC_nCS0*/\
+/* SB-T35 Ethernet */\
+MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0))
/*GPMC_nCS4*/\
+/* CM-T35 Ethernet */\
+MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0))
/*GPMC_nCS5*/\
+MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4))/*GPIO_59*/\
+MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0))/*GPMC_nADV_ALE*/\+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0))/*DSS_HSYNC*/\
+MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
/*DSS_VSYNC*/\
+MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0))/*DSS_ACBIAS*/\
+MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
/*DSS_DATA0*/\
+MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
/*DSS_DATA1*/\
+MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
/*DSS_DATA2*/\
+MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
/*DSS_DATA3*/\
+MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
/*DSS_DATA4*/\
+MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
/*DSS_DATA5*/\
+MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
/*DSS_DATA6*/\
+MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
/*DSS_DATA7*/\
+MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
/*DSS_DATA8*/\
+MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
/*DSS_DATA9*/\+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /*Serial Interface*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\+ /*Control and debug */\
+MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))/*SYS_32K*/\
+MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))/*SYS_CLKREQ*/\
+MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0))/*SYS_nIRQ*/\+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))/*sdrc_cke0*/\
+MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
/*sdrc_cke1*/\board/cm-t35/cm-t35.h new file +2
-0+ +#endif board/cm-t35/config.mk new file +30
-0@@ -0,0 +1,30 @@ +# +# (C) Copyright 2009 +# CompuLab, Ltd., <www.compulab.co.il> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000include/configs/omap3_cm- renamed from include/configs/omap3_cm-t35.h +0
-0
t35.h
new file mode 100755
index 0000000..0fbb62finclude/configs/omap3_cm-t35.h new file +26
-0@@ -0,0 +1,301 @@ +/* +* (C) Copyright 2009 CompuLab, Ltd. +* +* Authors : +* Igor Vaisbein <[email protected]> +* Mike Rapoport <[email protected]> +* +* Derived from omap3evm and Beagle Board by +* Manikandan Pillai <[email protected]> +* Richard Woodruff <[email protected]> +* Syed Mohammed Khasim <[email protected]> +* +* Configuration settings for the CompuLab CM-T35 board. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. include/configs/omap3_cm-t35.h line 36
Quoted 10 lines
include/configs/omap3_cm-t35.h new file +10
-0+* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> Please take a look at the latest config files. We have got rid of this.
Quoted 1 line
http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=9c44ddccb6602f620fc037974f3e4468ad8a7c0c
Will fix.
Quoted 277 lines
Quoted 275 lines
include/configs/omap3_cm-t35.h new file +28
-0+ +/* High Level Configuration Options */ +#define CONFIG_ARMCORTEXA8 1/* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1/* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1/* which is a 34XX */ +#define CONFIG_OMAP3430 1/* which is in a 3430 */ +#define CONFIG_CM_T35 1/* working with CM_T35 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000/* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ/* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* Size of malloc() pool */ +#define CONFIG_ENV_SIZE SZ_128K/* Total Size Environment */
include/configs/omap3_cm-t35.h new file +183
-0+/* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_512K) +#define CONFIG_SYS_GBL_DATA_SIZE 128/* bytes reserved for */ +/* initial data */ +/* NS16550 Configuration */ +#define V_NS16550_CLK 48000000/* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* serial console configuration */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3/* UART3 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */ +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH/* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA/* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS/* List all found images */ + +#define CONFIG_SYS_NO_FLASH + +/* I2C */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* TWL4030 */ +#define CONFIG_TWL4030_POWER 1 + +/* Board NAND Info. */ +#define CONFIG_NAND_OMAP_GPMC 1 +#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 +#define OMAP34XX_GPMC_NAND_SMNAND 1 + +#define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ +/* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE/* physical address */ +/* to access */ +/* nand at CS0 */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of */ +/* NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +/* JFFS2 */ +#define CONFIG_JFFS2_NAND +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +/* ubi/ubifs related definitions */ +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "baudrate=115200\0"\ + "console=ttyS2,115200n8\0" \ + "autoload=no\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "onenand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \ + "1920k(u-boot)," \ + "256k(env)," \ + "4m(kernel)," \ + "-(fs)," + +#define CONFIG_AUTO_COMPLETE 1 +/* +* Miscellaneous configurable options +*/ +#define V_PROMPT "CM-T35 # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16/* max number of command */ +/* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000) + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)/* default load */ +/* address */ + +/* +* OMAP3 has 12 GP timers, they can be driven by the system clock +* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). +* This rate is divided by a local divisor. +*/ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* +* Stack sizes +* +* The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE SZ_128K/* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K/* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K/* FIQ stack */ +#endif + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1/* CS1 may not be populated on CM-T35 */
include/configs/omap3_cm-t35.h new file +14
-0+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M/* at least 32 meg */ + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/* PISMO support */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520/* max number of sectors */ +/* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2/* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN SZ_256K/* Reserve 2 sectors */
include/configs/omap3_cm-t35.h new file +40
-1+ +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_IS_IN_NAND 1 + +/* environment */ +#define SMNAND_ENV_OFFSET 0x260000/* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR boot_flash_env_addr + +#ifndef __ASSEMBLY__ +extern struct gpmc *gpmc_cfg; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +/* SMSC9220 Ethernet */ +#if defined(CONFIG_CMD_NET ) +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#endif /* (CONFIG_CMD_NET) */ + +/* BOOTP fields */ +#define CONFIG_BOOTP_SUBNETMASK 0x00000001 +#define CONFIG_BOOTP_GATEWAY 0x00000002 +#define CONFIG_BOOTP_HOSTNAME 0x00000004 +#define CONFIG_BOOTP_BOOTPATH 0x00000010 + +#define CONFIG_OMAP3_GPIO_6 1 + +#endif /* __CONFIG_H */ --1.6.0.6
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Sincerely yours, Mike.
PATCH 1/1 omap3: add CM-T35 board
Quoted 21 lines · Mike Rapoport
Quoted 20 lines · Sandeep
Quoted 19 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 boardAdd CM-T35 board support
Signed-off-by Mike Rapoport <[email protected]>--- Makefile | 3 + board/cm-t35/Makefile | 47 ++++++ board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++ board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++ board/cm-t35/config.mk | 30 ++++ include/configs/omap3_cm-t35.h | 301
Quoted 8 lines
Quoted 4 lines
If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/It has beagle, sdp, etc
As far as I know, U-Boot structures board files by board/vendor/board rather than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/, just like overo.
Agreed. You should use board/$vendor/$board if $vendor plans on having more than 1 board, and board/$board is OK if you're only supporting this one board.
<snip>
Quoted 9 lines
Quoted 9 lines
Makefile omap3_zoom1_config : unconfig · line 3173
Quoted 9 lines
Makefile +3
-0@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 +
I'd title your _config rule the same as your board name, ie drop the omap3_ prefix above. And the above list should be alphabetically sorted.
Best,
Peter
PATCH 1/1 omap3: add CM-T35 board
Quoted 40 lines · Peter Tyser
Quoted 19 lines · Mike Rapoport
Quoted 18 lines · Sandeep
Quoted 18 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 boardAdd CM-T35 board support
Signed-off-by Mike Rapoport <[email protected]>--- Makefile | 3 + board/cm-t35/Makefile | 47 ++++++ board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++ board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++ board/cm-t35/config.mk | 30 ++++ include/configs/omap3_cm-t35.h | 301Quoted 7 lines
Quoted 4 lines
If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/It has beagle, sdp, etc
As far as I know, U-Boot structures board files by board/vendor/board rather than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/, just like overo.
Agreed. You should use board/$vendor/$board if $vendor plans on having more than 1 board, and board/$board is OK if you're only supporting this one board.
<snip>
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Makefile +0
-0@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Makefile omap3_zoom1_config : unconfig · line 3173
Quoted 3 lines
Makefile +3
-0+omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 +I'd title your
_configrule the same as your board name, ie drop theomap3_prefix above. And the above list should be alphabetically sorted.
I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.
Quoted 4 lines
Best,
Peter
Signature · 2 lines
Sincerely yours, Mike.
PATCH 1/1 omap3: add CM-T35 board
<snip>
Quoted 14 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Makefile +0
-0@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Makefile omap3_zoom1_config : unconfig · line 3173
Quoted 3 lines
Makefile +3
-0+omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 +I'd title your
_configrule the same as your board name, ie drop theomap3_prefix above. And the above list should be alphabetically sorted.
Quoted 1 line
I'd prefer to keep the '
omap3_' prefix to stay inline with other omap3 boards.
Just because the other omap3_ board are wrong doesn't mean your board should be too:) This same question was discussed for the devkit8000:
http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html
Best,
Peter
PATCH 1/1 omap3: add CM-T35 board
Quoted 14 lines · Peter Tyser
<snip>
Quoted 12 lines
Quoted 12 lines
Quoted 9 lines
Quoted 9 lines
Makefile omap3_zoom1_config : unconfig · line 3173
Quoted 9 lines
Makefile +3
-0@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 +I'd title your
_configrule the same as your board name, ie drop theomap3_prefix above. And the above list should be alphabetically sorted.
Quoted 6 lines
Quoted 1 line
I'd prefer to keep the '
omap3_' prefix to stay inline with other omap3 boards.Just because the other
omap3_board are wrong doesn't mean your board should be too:) This same question was discussed for the devkit8000:
http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html
Please drop the omap3_ prefix.
New boards are following the standard convention.
Tom
PATCH 1/1 omap3: add CM-T35 board
Quoted 19 lines · Tom
Quoted 18 lines · Peter Tyser
<snip>
Quoted 15 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Makefile +0
-0@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpdomap3
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Makefile
Quoted 3 lines
Makefile +3
-0+omap3_cm-t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3 +I'd title your
_configrule the same as your board name, ie drop theomap3_prefix above. And the above list should be alphabetically sorted.I'd prefer to keep the '
omap3_' prefix to stay inline with other omap3 boards.
Quoted 7 lines
Quoted 4 lines
Just because the other
omap3_board are wrong doesn't mean your board should be too:) This same question was discussed for the devkit8000:
http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.htmlPlease drop the
omap3_prefix.
New boards are following the standard convention.
Ok
Quoted 3 lines
Tom
Signature · 2 lines
Sincerely yours, Mike.
PATCH 1/1 omap3: add CM-T35 board
In reply to Mike RapoportDear Mike Rapoport,
Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 4 lines
I'd title your
_configrule the same as your board name, ie drop theomap3_prefix above. And the above list should be alphabetically sorted.I'd prefer to keep the '
omap3_' prefix to stay inline with other omap3 boards.
Please drop it. The other Omap3 boards need to be fixed later.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are certain things men must do to remain men. -- Kirk, "The Ultimate Computer", stardate 4929.4