Skip to contentSkip to conversation

omap3: add CM-T35 board

PATCH New Mike Rapoport 5 participants 9 messages Nov 11, 2009 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 omap3: add CM-T35 board

Add CM-T35 board support

---
 Makefile                       |    3 +
 board/cm-t35/Makefile          |   47 ++++++
 board/cm-t35/cm-t35.c          |  196 ++++++++++++++++++++++++++
 board/cm-t35/cm-t35.h          |  173 +++++++++++++++++++++++
 board/cm-t35/config.mk         |   30 ++++
 include/configs/omap3_cm-t35.h |  301 ++++++++++++++++++++++++++++++++++++++++
 6 files changed, 750 insertions(+), 0 deletions(-)
 create mode 100644 board/cm-t35/Makefile
 create mode 100644 board/cm-t35/cm-t35.c
 create mode 100644 board/cm-t35/cm-t35.h
 create mode 100644 board/cm-t35/config.mk
 create mode 100755 include/configs/omap3_cm-t35.h
Makefile +3 -0
index bcb3fe9..8771c90 100644
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :	unconfig
 omap3_zoom2_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
+omap3_cm-t35_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+
 smdkc100_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
 
board/cm-t35/Makefile new file +47 -0

47 lines not on this page · raw message

board/cm-t35/cm-t35.c new file +196 -0

196 lines not on this page · raw message

board/cm-t35/cm-t35.h new file +173 -0

173 lines not on this page · raw message

board/cm-t35/config.mk new file +30 -0
new file mode 100644
index 0000000..6d1a511
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd., <www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
\ No newline at end of file
include/configs/omap3_cm-t35.h new file +301 -0

301 lines not on this page · raw message

Signature · 1 line
1.6.0.6
#1 lore raw

PATCH 1/1 omap3: add CM-T35 board

Quoted 12 lines

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 board

Add CM-T35 board support

Quoted 8 lines
---
 Makefile                       |    3 +
 board/cm-t35/Makefile          |   47 ++++++
 board/cm-t35/cm-t35.c          |  196 ++++++++++++++++++++++++++
 board/cm-t35/cm-t35.h          |  173 +++++++++++++++++++++++
 board/cm-t35/config.mk         |   30 ++++
 include/configs/omap3_cm-t35.h |  301

If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/

It has beagle, sdp, etc

Quoted 7 lines

++++++++++++++++++++++++++++++++++++++++

 6 files changed, 750 insertions(+), 0 deletions(-)
 create mode 100644 board/cm-t35/Makefile
 create mode 100644 board/cm-t35/cm-t35.c
 create mode 100644 board/cm-t35/cm-t35.h
 create mode 100644 board/cm-t35/config.mk
 create mode 100755 include/configs/omap3_cm-t35.h

You also need entries to MAKEALL and MAINTAINERS

Quoted 542 lines
Makefile +3 -0
index bcb3fe9..8771c90 100644
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
 omap3_zoom2_config : unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
+omap3_cm-t35_config :        unconfig
+     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+
 smdkc100_config:     unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
 
board/cm-t35/Makefile new file +47 -0
new file mode 100644
index 0000000..7b80aaa
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB  = $(obj)lib$(BOARD).a
+
+COBJS        := cm-t35.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB):      $(obj).depend $(OBJS)
+     $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+     rm -f $(OBJS)
+
+distclean:   clean
+     rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
board/cm-t35/cm-t35.c new file +64 -0
new file mode 100644
index 0000000..8f0be65
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2009
+ * CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors :
+ *   Igor Vaisbein <[email protected]>
+ *   Mike Rapoport <[email protected]>
+ *
+ * Derived from omap3evm and Beagle Board by
+ *   Manikandan Pillai <[email protected]>
+ *   Richard Woodruff <[email protected]>
+ *   Syed Mohammed Khasim <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <net.h>
+#include <i2c.h>
+#include <twl4030.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+
+#include "cm-t35.h"
+
+#define CM_T35_SMC911X_BASE  0x2C000000
+#define SB_T35_SMC911X_BASE  (CM_T35_SMC911X_BASE + SZ_16M)
+
+static u32 gpmc_net_config[GPMC_MAX_REG] = {
+     NET_GPMC_CONFIG1,
+     NET_GPMC_CONFIG2,
+     NET_GPMC_CONFIG3,
+     NET_GPMC_CONFIG4,
+     NET_GPMC_CONFIG5,
+     NET_GPMC_CONFIG6,
+     0
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: setup_net_chip
+ * Description: Setting up the configuration GPMC registers specific to

the
+ * Ethernet hardware.
+ */

board/cm-t35/cm-t35.c new file +74 -0
+static void setup_net_chip(void)
+{
+     struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+     enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
+                           CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
+     enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
+                           SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
+
+     /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+     writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+
+     /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+     writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+
+     /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+     writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+             &ctrl_base->gpmc_nadv_ale);
+
+     /* Reset the ethernet controller via TPS65930 GPIO */
+     /* Set GPIO1 of TPS65930 as output */
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x03);
+     /* Send a pulse on the GPIO pin */
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x0C);
+     udelay(1);
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x09);
+     udelay(1);
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x0C);
+
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+     gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+     /* board id for Linux */
+     gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
+     /* boot param addr */
+     gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+     return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ */
+int misc_init_r(void)
+{
+
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+     i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#if defined(CONFIG_CMD_NET)
+     setup_net_chip();
+#endif
+
+     dieid_num_r();
+
+     return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to

the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */

board/cm-t35/cm-t35.c new file +53 -0
+void set_muxconf_regs(void)
+{
+     MUX_CM_T35();
+}
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int handle_mac_address(void)
+{
+     unsigned char enetaddr[6];
+     int rc;
+
+     rc = eth_getenv_enetaddr("ethaddr", enetaddr);
+     if (rc)
+             return 0;
+
+     rc = i2c_read(0x50, 0, 1, enetaddr, 6);
+     if (rc)
+             return rc;
+
+     if (!is_valid_ether_addr(enetaddr))
+             return -1;
+
+     return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+     int err1 = 0, err2 = 0;
+
+#ifdef CONFIG_SMC911X
+     err1 = handle_mac_address();
+     err2 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
+
+     if (err1 && !err2)
+             printf("CM-T35: No MAC address found\n");
+
+     err1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
+
+     /* run eth_init to set up MAC address prior to OS boot */
+     if (!err1 || !err2)
+             err1 = eth_init(bis);
+     else
+             err1 = -1;
+#endif
+     return err1;
+}
board/cm-t35/cm-t35.h new file +81 -0
new file mode 100644
index 0000000..d44d89e
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2009 CompuLab, Ltd
+ * Authors:
+ *   Igor Vaisbein <[email protected]>
+ *   Mike Rapoport <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CM_T35_H_
+#define _CM_T35_H_
+
+const omap3_sysinfo sysinfo = {
+     DDR_DISCRETE,
+     "CM-T35 board",
+     "NAND",
+};
+
+/* static void setup_net_chip(void); */
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_CM_T35() \
+ /*SDRC*/\
+ MUX_VAL(CP(SDRC_D0),                (IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1),                (IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2),                (IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3),                (IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4),                (IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5),                (IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6),                (IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7),                (IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8),                (IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9),                (IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10),               (IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11),               (IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12),               (IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13),               (IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14),               (IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15),               (IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16),               (IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17),               (IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18),               (IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19),               (IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20),               (IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21),               (IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22),               (IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23),               (IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24),               (IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25),               (IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26),               (IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27),               (IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28),               (IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29),               (IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30),               (IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31),               (IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK),               (IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0),              (IEN  | PTD | DIS | M0))

/*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
/*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
/*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
/*SDRC_DQS3*/\
+ /*GPMC*/\

+ MUX_VAL(CP(GPMC_A1),                (IDIS | PTU | EN  | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2),                (IDIS | PTU | EN  | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3),                (IDIS | PTU | EN  | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4),                (IDIS | PTU | EN  | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5),                (IDIS | PTU | EN  | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6),                (IDIS | PTU | EN  | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7),                (IDIS | PTU | EN  | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8),                (IDIS | PTU | EN  | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9),                (IDIS | PTU | EN  | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10),               (IDIS | PTU | EN  | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0),                (IEN  | PTU | EN  | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1),                (IEN  | PTU | EN  | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2),                (IEN  | PTU | EN  | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3),                (IEN  | PTU | EN  | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4),                (IEN  | PTU | EN  | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5),                (IEN  | PTU | EN  | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6),                (IEN  | PTU | EN  | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7),                (IEN  | PTU | EN  | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8),                (IEN  | PTU | EN  | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9),                (IEN  | PTU | EN  | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10),               (IEN  | PTU | EN  | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11),               (IEN  | PTU | EN  | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12),               (IEN  | PTU | EN  | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13),               (IEN  | PTU | EN  | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14),               (IEN  | PTU | EN  | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15),               (IEN  | PTU | EN  | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0),              (IDIS | PTU | EN  | M0))

/*GPMC_nCS0*/\
+/* SB-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0))
/*GPMC_nCS4*/\
+/* CM-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0))
/*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\

+ MUX_VAL(CP(GPMC_NOE),               (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE),               (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE),  (IDIS | PTU | EN  | M0)) /*GPMC_nBE0_CLE*/\
+ MUX_VAL(CP(GPMC_NBE1),              (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
+ MUX_VAL(CP(GPMC_NWP),               (IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0),     (IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
+ /*DSS*/\
+ MUX_VAL(CP(DSS_PCLK),               (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC),              (IDIS | PTD | DIS | M0))

/*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
/*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
/*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
/*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
/*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
/*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
/*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
/*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
/*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
/*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
/*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
/*DSS_DATA9*/\

+ MUX_VAL(CP(DSS_DATA10),     (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11),     (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12),     (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13),     (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14),     (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15),     (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16),     (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17),     (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18),     (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19),     (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20),     (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21),     (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22),     (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23),     (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+ /*Serial Interface*/\
+ MUX_VAL(CP(UART3_RX_IRRX),  (IEN  | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
+ MUX_VAL(CP(UART3_TX_IRTX),  (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
+ MUX_VAL(CP(I2C1_SCL),               (IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA),               (IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\

+ /*Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\

+ MUX_VAL(CP(SYS_OFF_MODE),   (IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1),    (IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
+ MUX_VAL(CP(SYS_CLKOUT2),    (IDIS | PTD | DIS | M4)) /*green LED*/\
+ MUX_VAL(CP(JTAG_nTRST),     (IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
+ MUX_VAL(CP(JTAG_TCK),               (IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
+ MUX_VAL(CP(JTAG_TMS),               (IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
+ MUX_VAL(CP(JTAG_TDI),               (IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
+ MUX_VAL(CP(SDRC_CKE0),              (IDIS | PTU | EN  | M0))

/*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
/*sdrc_cke1*/\

board/cm-t35/cm-t35.h new file +2 -0
+
+#endif
board/cm-t35/config.mk new file +30 -0
new file mode 100644
index 0000000..6d1a511
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd., <www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
\ No newline at end of file
include/configs/omap3_cm- renamed from include/configs/omap3_cm-t35.h +0 -0

t35.h
new file mode 100755
index 0000000..0fbb62f

include/configs/omap3_cm-t35.h new file +26 -0
@@ -0,0 +1,301 @@
+/*
+ * (C) Copyright 2009 CompuLab, Ltd.
+ *
+ * Authors :
+ *   Igor Vaisbein <[email protected]>
+ *   Mike Rapoport <[email protected]>
+ *
+ * Derived from omap3evm and Beagle Board by
+ *   Manikandan Pillai <[email protected]>
+ *   Richard Woodruff <[email protected]>
+ *   Syed Mohammed Khasim <[email protected]>
+ *
+ * Configuration settings for the CompuLab CM-T35 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.       See the
+ * GNU General Public License for more details.

include/configs/omap3_cm-t35.h line 36

Quoted 10 lines
include/configs/omap3_cm-t35.h new file +10 -0
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>

Please take a look at the latest config files. We have got rid of this.

http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=9c44ddccb6602f620fc037974f3e4468ad8a7c0c

Quoted 275 lines
include/configs/omap3_cm-t35.h new file +28 -0
+
+/* High Level Configuration Options */
+#define CONFIG_ARMCORTEXA8   1       /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP          1       /* in a TI OMAP core */
+#define CONFIG_OMAP34XX              1       /* which is a 34XX */
+#define CONFIG_OMAP3430              1       /* which is in a 3430 */
+#define CONFIG_CM_T35                1       /* working with CM_T35 */
+
+#include <asm/arch/cpu.h>    /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+#define CONFIG_DISPLAY_CPUINFO               1
+#define CONFIG_DISPLAY_BOARDINFO     1
+
+/* Clock Defines */
+#define V_OSCK                       26000000        /* Clock output from T2 */
+#define V_SCLK                       (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ                        /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG           1       /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS     1
+#define CONFIG_INITRD_TAG            1
+#define CONFIG_REVISION_TAG          1
+
+/* Size of malloc() pool */
+#define CONFIG_ENV_SIZE                      SZ_128K /* Total Size

Environment */

include/configs/omap3_cm-t35.h new file +183 -0
+                                             /* Sector */
+#define CONFIG_SYS_MALLOC_LEN                (CONFIG_ENV_SIZE + SZ_512K)
+#define CONFIG_SYS_GBL_DATA_SIZE     128     /* bytes reserved for */
+                                             /* initial data */
+/* NS16550 Configuration */
+#define V_NS16550_CLK                        48000000        /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE  (-4)
+#define CONFIG_SYS_NS16550_CLK               V_NS16550_CLK
+
+/* serial console configuration */
+#define CONFIG_CONS_INDEX            3
+#define CONFIG_SYS_NS16550_COM3              OMAP34XX_UART3
+#define CONFIG_SERIAL3                       3       /* UART3 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE                      115200
+#define CONFIG_SYS_BAUDRATE_TABLE    {4800, 9600, 19200, 38400, 57600,\
+                                     115200}
+#define CONFIG_MMC                   1
+#define CONFIG_OMAP3_MMC             1
+#define CONFIG_DOS_PARTITION         1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2              /* EXT2 Support                 */
+#define CONFIG_CMD_FAT               /* FAT support                  */
+#define CONFIG_CMD_JFFS2     /* JFFS2 Support                */
+#define CONFIG_CMD_YAFFS2    /* YAFFS2 Support               */
+#define CONFIG_CMD_UBI               /* UBI Support                  */
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_CMD_I2C               /* I2C serial bus support       */
+#define CONFIG_CMD_MMC               /* MMC support                  */
+#define CONFIG_CMD_NAND              /* NAND support                 */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_FLASH              /* flinfo, erase, protect       */
+#undef CONFIG_CMD_FPGA               /* FPGA configuration Support   */
+#undef CONFIG_CMD_IMLS               /* List all found images        */
+
+#define CONFIG_SYS_NO_FLASH
+
+/* I2C */
+#define CONFIG_SYS_I2C_SPEED         100000
+#define CONFIG_SYS_I2C_SLAVE         1
+#define CONFIG_SYS_I2C_BUS           0
+#define CONFIG_SYS_I2C_BUS_SELECT    1
+#define CONFIG_DRIVER_OMAP34XX_I2C   1
+
+/* TWL4030 */
+#define CONFIG_TWL4030_POWER         1
+
+/* Board NAND Info. */
+#define CONFIG_NAND_OMAP_GPMC                1
+#define GPMC_NAND_ECC_LP_x8_LAYOUT   1
+#define OMAP34XX_GPMC_NAND_SMNAND    1
+
+#define CONFIG_SYS_NAND_ADDR         NAND_BASE       /* physical address */
+                                                     /* to access nand */
+#define CONFIG_SYS_NAND_BASE         NAND_BASE       /* physical address */
+                                                     /* to access */
+                                                     /* nand at CS0 */
+
+#define CONFIG_SYS_MAX_NAND_DEVICE   1               /* Max number of */
+                                                     /* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF            /* needed for nand_util.c */
+
+/* JFFS2 */
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_DEV             "nand0"
+#define CONFIG_SYS_MAX_MTD_BANKS     (CONFIG_SYS_MAX_FLASH_BANKS + \
+                                     CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+#define CONFIG_SYS_JFFS2_FIRST_BANK  CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS   1
+
+/* ubi/ubifs related definitions */
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE            /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+
+/* Environment information */
+#define CONFIG_BOOTDELAY     3
+
+#define CONFIG_BOOTFILE              uImage
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+     "loadaddr=0x82000000\0" \
+     "baudrate=115200\0"\
+     "console=ttyS2,115200n8\0" \
+     "autoload=no\0" \
+     "mmcargs=setenv bootargs console=${console} " \
+             "root=/dev/mmcblk0p2 rw " \
+             "rootfstype=ext3 rootwait\0" \
+     "nandargs=setenv bootargs console=${console} " \
+             "root=/dev/mtdblock4 rw " \
+             "rootfstype=jffs2\0" \
+     "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+     "bootscript=echo Running bootscript from mmc ...; " \
+             "source ${loadaddr}\0" \
+     "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+     "mmcboot=echo Booting from mmc ...; " \
+             "run mmcargs; " \
+             "bootm ${loadaddr}\0" \
+     "nandboot=echo Booting from nand ...; " \
+             "run nandargs; " \
+             "onenand read ${loadaddr} 280000 400000; " \
+             "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+     "if mmc init; then " \
+             "if run loadbootscript; then " \
+                     "run bootscript; " \
+             "else " \
+                     "if run loaduimage; then " \
+                             "run mmcboot; " \
+                     "else run nandboot; " \
+                     "fi; " \
+             "fi; " \
+     "else run nandboot; fi"
+
+#define MTDIDS_DEFAULT               "nand0=nand"
+#define MTDPARTS_DEFAULT     "mtdparts=nand:512k(xloader),"          \
+                                     "1920k(u-boot),"                \
+                                     "256k(env),"                    \
+                                     "4m(kernel),"                   \
+                                     "-(fs),"
+
+#define CONFIG_AUTO_COMPLETE 1
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT             "CM-T35 # "
+
+#define CONFIG_SYS_LONGHELP          /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER               /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2   "> "
+#define CONFIG_SYS_PROMPT            V_PROMPT
+#define CONFIG_SYS_CBSIZE            256     /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE            (CONFIG_SYS_CBSIZE + \
+                                     sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS           16      /* max number of command */
+                                             /* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE          (CONFIG_SYS_CBSIZE)
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START     (OMAP34XX_SDRC_CS0 + 0x01000000)
+#define CONFIG_SYS_MEMTEST_END               (OMAP34XX_SDRC_CS0 + 0x08000000)
+
+#define CONFIG_SYS_LOAD_ADDR         (OMAP34XX_SDRC_CS0) /* default load */
+                                                             /* address */
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE         OMAP34XX_GPT2
+#define CONFIG_SYS_PTV                       2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ                        1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE     SZ_128K /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ SZ_4K   /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ SZ_4K   /* FIQ stack */
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1       /* CS1 may not be populated on CM-T35

*/

include/configs/omap3_cm-t35.h new file +14 -0
+#define PHYS_SDRAM_1         OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE    SZ_32M  /* at least 32 meg */
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C           1
+
+/* PISMO support */
+#define PISMO1_NAND_SIZE             GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE             GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT    520     /* max number of sectors */
+                                             /* on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS   2       /* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN               SZ_256K /* Reserve 2 sectors

*/

include/configs/omap3_cm-t35.h new file +40 -1
+
+#define CONFIG_SYS_FLASH_BASE                boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE              CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_ENV_IS_IN_NAND        1
+
+/* environment */
+#define SMNAND_ENV_OFFSET            0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE     boot_flash_sec
+#define CONFIG_ENV_OFFSET            boot_flash_off
+#define CONFIG_ENV_ADDR                      boot_flash_env_addr
+
+#ifndef __ASSEMBLY__
+extern struct gpmc *gpmc_cfg;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+/* SMSC9220 Ethernet */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#endif /* (CONFIG_CMD_NET) */
+
+/* BOOTP fields */
+#define CONFIG_BOOTP_SUBNETMASK              0x00000001
+#define CONFIG_BOOTP_GATEWAY         0x00000002
+#define CONFIG_BOOTP_HOSTNAME                0x00000004
+#define CONFIG_BOOTP_BOOTPATH                0x00000010
+
+#define CONFIG_OMAP3_GPIO_6          1
+
+#endif /* __CONFIG_H */
--

1.6.0.6

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#2 lore raw

PATCH 1/1 omap3: add CM-T35 board

Quoted 20 lines · Sandeep
Quoted 11 lines

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 board

Add CM-T35 board support

Quoted 8 lines
---
 Makefile                       |    3 +
 board/cm-t35/Makefile          |   47 ++++++
 board/cm-t35/cm-t35.c          |  196 ++++++++++++++++++++++++++
 board/cm-t35/cm-t35.h          |  173 +++++++++++++++++++++++
 board/cm-t35/config.mk         |   30 ++++
 include/configs/omap3_cm-t35.h |  301
Quoted 4 lines

If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/

It has beagle, sdp, etc

As far as I know, U-Boot structures board files by board/vendor/board rather than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/, just like overo.

Quoted 9 lines
Quoted 7 lines

++++++++++++++++++++++++++++++++++++++++

 6 files changed, 750 insertions(+), 0 deletions(-)
 create mode 100644 board/cm-t35/Makefile
 create mode 100644 board/cm-t35/cm-t35.c
 create mode 100644 board/cm-t35/cm-t35.h
 create mode 100644 board/cm-t35/config.mk
 create mode 100755 include/configs/omap3_cm-t35.h

You also need entries to MAKEALL and MAINTAINERS

Ok, will add.

Quoted 555 lines
Quoted 541 lines
Makefile +3 -0
index bcb3fe9..8771c90 100644
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
 omap3_zoom2_config : unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
+omap3_cm-t35_config :        unconfig
+     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+
 smdkc100_config:     unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
 
board/cm-t35/Makefile new file +47 -0
new file mode 100644
index 0000000..7b80aaa
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB  = $(obj)lib$(BOARD).a
+
+COBJS        := cm-t35.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB):      $(obj).depend $(OBJS)
+     $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+     rm -f $(OBJS)
+
+distclean:   clean
+     rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
board/cm-t35/cm-t35.c new file +64 -0
new file mode 100644
index 0000000..8f0be65
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2009
+ * CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors :
+ *   Igor Vaisbein <[email protected]>
+ *   Mike Rapoport <[email protected]>
+ *
+ * Derived from omap3evm and Beagle Board by
+ *   Manikandan Pillai <[email protected]>
+ *   Richard Woodruff <[email protected]>
+ *   Syed Mohammed Khasim <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <net.h>
+#include <i2c.h>
+#include <twl4030.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+
+#include "cm-t35.h"
+
+#define CM_T35_SMC911X_BASE  0x2C000000
+#define SB_T35_SMC911X_BASE  (CM_T35_SMC911X_BASE + SZ_16M)
+
+static u32 gpmc_net_config[GPMC_MAX_REG] = {
+     NET_GPMC_CONFIG1,
+     NET_GPMC_CONFIG2,
+     NET_GPMC_CONFIG3,
+     NET_GPMC_CONFIG4,
+     NET_GPMC_CONFIG5,
+     NET_GPMC_CONFIG6,
+     0
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: setup_net_chip
+ * Description: Setting up the configuration GPMC registers specific to

the
+ * Ethernet hardware.
+ */

board/cm-t35/cm-t35.c new file +74 -0
+static void setup_net_chip(void)
+{
+     struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+     enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
+                           CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
+     enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
+                           SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
+
+     /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+     writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+
+     /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+     writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+
+     /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+     writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+             &ctrl_base->gpmc_nadv_ale);
+
+     /* Reset the ethernet controller via TPS65930 GPIO */
+     /* Set GPIO1 of TPS65930 as output */
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x03);
+     /* Send a pulse on the GPIO pin */
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x0C);
+     udelay(1);
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x09);
+     udelay(1);
+     twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+                          TWL4030_BASEADD_GPIO+0x0C);
+
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+     gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+     /* board id for Linux */
+     gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
+     /* boot param addr */
+     gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+     return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ */
+int misc_init_r(void)
+{
+
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+     i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#if defined(CONFIG_CMD_NET)
+     setup_net_chip();
+#endif
+
+     dieid_num_r();
+
+     return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to

the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */

board/cm-t35/cm-t35.c new file +53 -0
+void set_muxconf_regs(void)
+{
+     MUX_CM_T35();
+}
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int handle_mac_address(void)
+{
+     unsigned char enetaddr[6];
+     int rc;
+
+     rc = eth_getenv_enetaddr("ethaddr", enetaddr);
+     if (rc)
+             return 0;
+
+     rc = i2c_read(0x50, 0, 1, enetaddr, 6);
+     if (rc)
+             return rc;
+
+     if (!is_valid_ether_addr(enetaddr))
+             return -1;
+
+     return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+     int err1 = 0, err2 = 0;
+
+#ifdef CONFIG_SMC911X
+     err1 = handle_mac_address();
+     err2 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
+
+     if (err1 && !err2)
+             printf("CM-T35: No MAC address found\n");
+
+     err1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
+
+     /* run eth_init to set up MAC address prior to OS boot */
+     if (!err1 || !err2)
+             err1 = eth_init(bis);
+     else
+             err1 = -1;
+#endif
+     return err1;
+}
board/cm-t35/cm-t35.h new file +81 -0
new file mode 100644
index 0000000..d44d89e
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2009 CompuLab, Ltd
+ * Authors:
+ *   Igor Vaisbein <[email protected]>
+ *   Mike Rapoport <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CM_T35_H_
+#define _CM_T35_H_
+
+const omap3_sysinfo sysinfo = {
+     DDR_DISCRETE,
+     "CM-T35 board",
+     "NAND",
+};
+
+/* static void setup_net_chip(void); */
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_CM_T35() \
+ /*SDRC*/\
+ MUX_VAL(CP(SDRC_D0),                (IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1),                (IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2),                (IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3),                (IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4),                (IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5),                (IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6),                (IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7),                (IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8),                (IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9),                (IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10),               (IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11),               (IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12),               (IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13),               (IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14),               (IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15),               (IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16),               (IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17),               (IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18),               (IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19),               (IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20),               (IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21),               (IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22),               (IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23),               (IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24),               (IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25),               (IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26),               (IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27),               (IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28),               (IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29),               (IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30),               (IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31),               (IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK),               (IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0),              (IEN  | PTD | DIS | M0))

/*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
/*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
/*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
/*SDRC_DQS3*/\
+ /*GPMC*/\

+ MUX_VAL(CP(GPMC_A1),                (IDIS | PTU | EN  | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2),                (IDIS | PTU | EN  | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3),                (IDIS | PTU | EN  | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4),                (IDIS | PTU | EN  | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5),                (IDIS | PTU | EN  | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6),                (IDIS | PTU | EN  | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7),                (IDIS | PTU | EN  | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8),                (IDIS | PTU | EN  | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9),                (IDIS | PTU | EN  | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10),               (IDIS | PTU | EN  | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0),                (IEN  | PTU | EN  | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1),                (IEN  | PTU | EN  | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2),                (IEN  | PTU | EN  | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3),                (IEN  | PTU | EN  | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4),                (IEN  | PTU | EN  | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5),                (IEN  | PTU | EN  | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6),                (IEN  | PTU | EN  | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7),                (IEN  | PTU | EN  | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8),                (IEN  | PTU | EN  | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9),                (IEN  | PTU | EN  | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10),               (IEN  | PTU | EN  | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11),               (IEN  | PTU | EN  | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12),               (IEN  | PTU | EN  | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13),               (IEN  | PTU | EN  | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14),               (IEN  | PTU | EN  | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15),               (IEN  | PTU | EN  | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0),              (IDIS | PTU | EN  | M0))

/*GPMC_nCS0*/\
+/* SB-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0))
/*GPMC_nCS4*/\
+/* CM-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0))
/*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\

+ MUX_VAL(CP(GPMC_NOE),               (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE),               (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE),  (IDIS | PTU | EN  | M0)) /*GPMC_nBE0_CLE*/\
+ MUX_VAL(CP(GPMC_NBE1),              (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
+ MUX_VAL(CP(GPMC_NWP),               (IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0),     (IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
+ /*DSS*/\
+ MUX_VAL(CP(DSS_PCLK),               (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC),              (IDIS | PTD | DIS | M0))

/*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
/*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
/*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
/*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
/*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
/*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
/*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
/*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
/*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
/*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
/*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
/*DSS_DATA9*/\

+ MUX_VAL(CP(DSS_DATA10),     (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11),     (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12),     (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13),     (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14),     (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15),     (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16),     (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17),     (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18),     (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19),     (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20),     (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21),     (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22),     (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23),     (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+ /*Serial Interface*/\
+ MUX_VAL(CP(UART3_RX_IRRX),  (IEN  | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
+ MUX_VAL(CP(UART3_TX_IRTX),  (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
+ MUX_VAL(CP(I2C1_SCL),               (IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA),               (IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\

+ /*Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\

+ MUX_VAL(CP(SYS_OFF_MODE),   (IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1),    (IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
+ MUX_VAL(CP(SYS_CLKOUT2),    (IDIS | PTD | DIS | M4)) /*green LED*/\
+ MUX_VAL(CP(JTAG_nTRST),     (IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
+ MUX_VAL(CP(JTAG_TCK),               (IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
+ MUX_VAL(CP(JTAG_TMS),               (IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
+ MUX_VAL(CP(JTAG_TDI),               (IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
+ MUX_VAL(CP(SDRC_CKE0),              (IDIS | PTU | EN  | M0))

/*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
/*sdrc_cke1*/\

board/cm-t35/cm-t35.h new file +2 -0
+
+#endif
board/cm-t35/config.mk new file +30 -0
new file mode 100644
index 0000000..6d1a511
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd., <www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
\ No newline at end of file
include/configs/omap3_cm- renamed from include/configs/omap3_cm-t35.h +0 -0

t35.h
new file mode 100755
index 0000000..0fbb62f

include/configs/omap3_cm-t35.h new file +26 -0
@@ -0,0 +1,301 @@
+/*
+ * (C) Copyright 2009 CompuLab, Ltd.
+ *
+ * Authors :
+ *   Igor Vaisbein <[email protected]>
+ *   Mike Rapoport <[email protected]>
+ *
+ * Derived from omap3evm and Beagle Board by
+ *   Manikandan Pillai <[email protected]>
+ *   Richard Woodruff <[email protected]>
+ *   Syed Mohammed Khasim <[email protected]>
+ *
+ * Configuration settings for the CompuLab CM-T35 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.       See the
+ * GNU General Public License for more details.

include/configs/omap3_cm-t35.h line 36

Quoted 10 lines
include/configs/omap3_cm-t35.h new file +10 -0
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>

Please take a look at the latest config files. We have got rid of this.

Quoted 1 line

http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=9c44ddccb6602f620fc037974f3e4468ad8a7c0c

Will fix.

Quoted 277 lines
Quoted 275 lines
include/configs/omap3_cm-t35.h new file +28 -0
+
+/* High Level Configuration Options */
+#define CONFIG_ARMCORTEXA8   1       /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP          1       /* in a TI OMAP core */
+#define CONFIG_OMAP34XX              1       /* which is a 34XX */
+#define CONFIG_OMAP3430              1       /* which is in a 3430 */
+#define CONFIG_CM_T35                1       /* working with CM_T35 */
+
+#include <asm/arch/cpu.h>    /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+#define CONFIG_DISPLAY_CPUINFO               1
+#define CONFIG_DISPLAY_BOARDINFO     1
+
+/* Clock Defines */
+#define V_OSCK                       26000000        /* Clock output from T2 */
+#define V_SCLK                       (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ                        /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG           1       /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS     1
+#define CONFIG_INITRD_TAG            1
+#define CONFIG_REVISION_TAG          1
+
+/* Size of malloc() pool */
+#define CONFIG_ENV_SIZE                      SZ_128K /* Total Size

Environment */

include/configs/omap3_cm-t35.h new file +183 -0
+                                             /* Sector */
+#define CONFIG_SYS_MALLOC_LEN                (CONFIG_ENV_SIZE + SZ_512K)
+#define CONFIG_SYS_GBL_DATA_SIZE     128     /* bytes reserved for */
+                                             /* initial data */
+/* NS16550 Configuration */
+#define V_NS16550_CLK                        48000000        /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE  (-4)
+#define CONFIG_SYS_NS16550_CLK               V_NS16550_CLK
+
+/* serial console configuration */
+#define CONFIG_CONS_INDEX            3
+#define CONFIG_SYS_NS16550_COM3              OMAP34XX_UART3
+#define CONFIG_SERIAL3                       3       /* UART3 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE                      115200
+#define CONFIG_SYS_BAUDRATE_TABLE    {4800, 9600, 19200, 38400, 57600,\
+                                     115200}
+#define CONFIG_MMC                   1
+#define CONFIG_OMAP3_MMC             1
+#define CONFIG_DOS_PARTITION         1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2              /* EXT2 Support                 */
+#define CONFIG_CMD_FAT               /* FAT support                  */
+#define CONFIG_CMD_JFFS2     /* JFFS2 Support                */
+#define CONFIG_CMD_YAFFS2    /* YAFFS2 Support               */
+#define CONFIG_CMD_UBI               /* UBI Support                  */
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_CMD_I2C               /* I2C serial bus support       */
+#define CONFIG_CMD_MMC               /* MMC support                  */
+#define CONFIG_CMD_NAND              /* NAND support                 */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_FLASH              /* flinfo, erase, protect       */
+#undef CONFIG_CMD_FPGA               /* FPGA configuration Support   */
+#undef CONFIG_CMD_IMLS               /* List all found images        */
+
+#define CONFIG_SYS_NO_FLASH
+
+/* I2C */
+#define CONFIG_SYS_I2C_SPEED         100000
+#define CONFIG_SYS_I2C_SLAVE         1
+#define CONFIG_SYS_I2C_BUS           0
+#define CONFIG_SYS_I2C_BUS_SELECT    1
+#define CONFIG_DRIVER_OMAP34XX_I2C   1
+
+/* TWL4030 */
+#define CONFIG_TWL4030_POWER         1
+
+/* Board NAND Info. */
+#define CONFIG_NAND_OMAP_GPMC                1
+#define GPMC_NAND_ECC_LP_x8_LAYOUT   1
+#define OMAP34XX_GPMC_NAND_SMNAND    1
+
+#define CONFIG_SYS_NAND_ADDR         NAND_BASE       /* physical address */
+                                                     /* to access nand */
+#define CONFIG_SYS_NAND_BASE         NAND_BASE       /* physical address */
+                                                     /* to access */
+                                                     /* nand at CS0 */
+
+#define CONFIG_SYS_MAX_NAND_DEVICE   1               /* Max number of */
+                                                     /* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF            /* needed for nand_util.c */
+
+/* JFFS2 */
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_DEV             "nand0"
+#define CONFIG_SYS_MAX_MTD_BANKS     (CONFIG_SYS_MAX_FLASH_BANKS + \
+                                     CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+#define CONFIG_SYS_JFFS2_FIRST_BANK  CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS   1
+
+/* ubi/ubifs related definitions */
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE            /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+
+/* Environment information */
+#define CONFIG_BOOTDELAY     3
+
+#define CONFIG_BOOTFILE              uImage
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+     "loadaddr=0x82000000\0" \
+     "baudrate=115200\0"\
+     "console=ttyS2,115200n8\0" \
+     "autoload=no\0" \
+     "mmcargs=setenv bootargs console=${console} " \
+             "root=/dev/mmcblk0p2 rw " \
+             "rootfstype=ext3 rootwait\0" \
+     "nandargs=setenv bootargs console=${console} " \
+             "root=/dev/mtdblock4 rw " \
+             "rootfstype=jffs2\0" \
+     "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+     "bootscript=echo Running bootscript from mmc ...; " \
+             "source ${loadaddr}\0" \
+     "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+     "mmcboot=echo Booting from mmc ...; " \
+             "run mmcargs; " \
+             "bootm ${loadaddr}\0" \
+     "nandboot=echo Booting from nand ...; " \
+             "run nandargs; " \
+             "onenand read ${loadaddr} 280000 400000; " \
+             "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+     "if mmc init; then " \
+             "if run loadbootscript; then " \
+                     "run bootscript; " \
+             "else " \
+                     "if run loaduimage; then " \
+                             "run mmcboot; " \
+                     "else run nandboot; " \
+                     "fi; " \
+             "fi; " \
+     "else run nandboot; fi"
+
+#define MTDIDS_DEFAULT               "nand0=nand"
+#define MTDPARTS_DEFAULT     "mtdparts=nand:512k(xloader),"          \
+                                     "1920k(u-boot),"                \
+                                     "256k(env),"                    \
+                                     "4m(kernel),"                   \
+                                     "-(fs),"
+
+#define CONFIG_AUTO_COMPLETE 1
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT             "CM-T35 # "
+
+#define CONFIG_SYS_LONGHELP          /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER               /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2   "> "
+#define CONFIG_SYS_PROMPT            V_PROMPT
+#define CONFIG_SYS_CBSIZE            256     /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE            (CONFIG_SYS_CBSIZE + \
+                                     sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS           16      /* max number of command */
+                                             /* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE          (CONFIG_SYS_CBSIZE)
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START     (OMAP34XX_SDRC_CS0 + 0x01000000)
+#define CONFIG_SYS_MEMTEST_END               (OMAP34XX_SDRC_CS0 + 0x08000000)
+
+#define CONFIG_SYS_LOAD_ADDR         (OMAP34XX_SDRC_CS0) /* default load */
+                                                             /* address */
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE         OMAP34XX_GPT2
+#define CONFIG_SYS_PTV                       2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ                        1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE     SZ_128K /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ SZ_4K   /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ SZ_4K   /* FIQ stack */
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1       /* CS1 may not be populated on CM-T35

*/

include/configs/omap3_cm-t35.h new file +14 -0
+#define PHYS_SDRAM_1         OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE    SZ_32M  /* at least 32 meg */
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C           1
+
+/* PISMO support */
+#define PISMO1_NAND_SIZE             GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE             GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT    520     /* max number of sectors */
+                                             /* on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS   2       /* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN               SZ_256K /* Reserve 2 sectors

*/

include/configs/omap3_cm-t35.h new file +40 -1
+
+#define CONFIG_SYS_FLASH_BASE                boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE              CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_ENV_IS_IN_NAND        1
+
+/* environment */
+#define SMNAND_ENV_OFFSET            0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE     boot_flash_sec
+#define CONFIG_ENV_OFFSET            boot_flash_off
+#define CONFIG_ENV_ADDR                      boot_flash_env_addr
+
+#ifndef __ASSEMBLY__
+extern struct gpmc *gpmc_cfg;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+/* SMSC9220 Ethernet */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#endif /* (CONFIG_CMD_NET) */
+
+/* BOOTP fields */
+#define CONFIG_BOOTP_SUBNETMASK              0x00000001
+#define CONFIG_BOOTP_GATEWAY         0x00000002
+#define CONFIG_BOOTP_HOSTNAME                0x00000004
+#define CONFIG_BOOTP_BOOTPATH                0x00000010
+
+#define CONFIG_OMAP3_GPIO_6          1
+
+#endif /* __CONFIG_H */
--

1.6.0.6

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 2 lines
Sincerely yours,
Mike.
#3 lore raw

PATCH 1/1 omap3: add CM-T35 board

Quoted 21 lines · Mike Rapoport
Quoted 20 lines · Sandeep
Quoted 19 lines

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 board

Add CM-T35 board support

---
 Makefile                       |    3 +
 board/cm-t35/Makefile          |   47 ++++++
 board/cm-t35/cm-t35.c          |  196 ++++++++++++++++++++++++++
 board/cm-t35/cm-t35.h          |  173 +++++++++++++++++++++++
 board/cm-t35/config.mk         |   30 ++++
 include/configs/omap3_cm-t35.h |  301
Quoted 8 lines
Quoted 4 lines

If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/

It has beagle, sdp, etc

As far as I know, U-Boot structures board files by board/vendor/board rather than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/, just like overo.

Agreed. You should use board/$vendor/$board if $vendor plans on having more than 1 board, and board/$board is OK if you're only supporting this one board.

<snip>

Quoted 9 lines
Quoted 9 lines

Makefile omap3_zoom1_config : unconfig · line 3173

Quoted 9 lines
Makefile +3 -0
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
 omap3_zoom2_config : unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
+omap3_cm-t35_config :        unconfig
+     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+

I'd title your _config rule the same as your board name, ie drop the omap3_ prefix above. And the above list should be alphabetically sorted.

Best,
Peter

#4 lore raw

PATCH 1/1 omap3: add CM-T35 board

Quoted 40 lines · Peter Tyser
Quoted 19 lines · Mike Rapoport
Quoted 18 lines · Sandeep
Quoted 18 lines

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mike Rapoport
Sent: Wednesday, November 11, 2009 3:03 AM
To: u-boot at lists.denx.de
Cc: Mike Rapoport
Subject: [U-Boot] [PATCH] omap3: add CM-T35 board

Add CM-T35 board support

---
 Makefile                       |    3 +
 board/cm-t35/Makefile          |   47 ++++++
 board/cm-t35/cm-t35.c          |  196 ++++++++++++++++++++++++++
 board/cm-t35/cm-t35.h          |  173 +++++++++++++++++++++++
 board/cm-t35/config.mk         |   30 ++++
 include/configs/omap3_cm-t35.h |  301
Quoted 7 lines
Quoted 4 lines

If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/

It has beagle, sdp, etc

As far as I know, U-Boot structures board files by board/vendor/board rather than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/, just like overo.

Agreed. You should use board/$vendor/$board if $vendor plans on having more than 1 board, and board/$board is OK if you're only supporting this one board.

<snip>

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Makefile +0 -0
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
 omap3_zoom2_config : unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines

Makefile omap3_zoom1_config : unconfig · line 3173

Quoted 3 lines
Makefile +3 -0
+omap3_cm-t35_config :        unconfig
+     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+

I'd title your _config rule the same as your board name, ie drop the omap3_ prefix above. And the above list should be alphabetically sorted.

I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.

Quoted 4 lines

Best,
Peter

Signature · 2 lines
Sincerely yours,
Mike.
#5 lore raw

PATCH 1/1 omap3: add CM-T35 board

<snip>

Quoted 14 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Makefile +0 -0
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
 omap3_zoom2_config : unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines

Makefile omap3_zoom1_config : unconfig · line 3173

Quoted 3 lines
Makefile +3 -0
+omap3_cm-t35_config :        unconfig
+     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+

I'd title your _config rule the same as your board name, ie drop the omap3_ prefix above. And the above list should be alphabetically sorted.

Quoted 1 line

I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.

Just because the other omap3_ board are wrong doesn't mean your board should be too:) This same question was discussed for the devkit8000:
http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html

Best,
Peter

#6 lore raw

PATCH 1/1 omap3: add CM-T35 board

Quoted 14 lines · Peter Tyser

<snip>

Quoted 12 lines
Quoted 12 lines
Quoted 9 lines
Quoted 9 lines

Makefile omap3_zoom1_config : unconfig · line 3173

Quoted 9 lines
Makefile +3 -0
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
 omap3_zoom2_config : unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
+omap3_cm-t35_config :        unconfig
+     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+

I'd title your _config rule the same as your board name, ie drop the omap3_ prefix above. And the above list should be alphabetically sorted.

Quoted 6 lines
Quoted 1 line

I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.

Just because the other omap3_ board are wrong doesn't mean your board should be too:) This same question was discussed for the devkit8000:
http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html

Please drop the omap3_ prefix.
New boards are following the standard convention.

Tom

#7 lore raw

PATCH 1/1 omap3: add CM-T35 board

Quoted 19 lines · Tom
Quoted 18 lines · Peter Tyser

<snip>

Quoted 15 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Makefile +0 -0
@@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
 omap3_zoom2_config : unconfig
      @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd

omap3

Quoted 6 lines
Quoted 3 lines
Quoted 3 lines

Makefile

Quoted 3 lines
Makefile +3 -0
+omap3_cm-t35_config :        unconfig
+     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+

I'd title your _config rule the same as your board name, ie drop the omap3_ prefix above. And the above list should be alphabetically sorted.

I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.

Quoted 7 lines
Quoted 4 lines

Just because the other omap3_ board are wrong doesn't mean your board should be too:) This same question was discussed for the devkit8000:
http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html

Please drop the omap3_ prefix.
New boards are following the standard convention.

Ok

Quoted 3 lines

Tom

Signature · 2 lines
Sincerely yours,
Mike.
#8 lore raw

PATCH 1/1 omap3: add CM-T35 board

In reply to Mike Rapoport

Dear Mike Rapoport,

Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 4 lines

I'd title your _config rule the same as your board name, ie drop the omap3_ prefix above. And the above list should be alphabetically sorted.

I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.

Please drop it. The other Omap3 boards need to be fixed later.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are certain things men must do to remain men.
	-- Kirk, "The Ultimate Computer", stardate 4929.4