Skip to contentSkip to conversation

regulator: Add WM8994 regulator support

PATCH Applied Mark Brown 2 participants 2 messages Jan 25, 2010 – Jan 26, 2010

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 regulator: Add WM8994 regulator support

The WM8994 contains two LDOs with mixed hardware/software control to minimise the number of external supplies required while delivering optimal voltages to minimise power consumption.

---
 drivers/regulator/Kconfig            |    7 +
 drivers/regulator/Makefile           |    1 +
 drivers/regulator/wm8994-regulator.c |  304 ++++++++++++++++++++++++++++++++++
 3 files changed, 312 insertions(+), 0 deletions(-)
 create mode 100644 drivers/regulator/wm8994-regulator.c
drivers/regulator/Kconfig +7 -0
index 262f62e..1f89f16 100644
@@ -104,6 +104,13 @@ config REGULATOR_WM8400
 	  This driver provides support for the voltage regulators of the
 	  WM8400 AudioPlus PMIC.
 
+config REGULATOR_WM8994
+	tristate "Wolfson Microelectronics WM8994 CODEC"
+	depends on MFD_WM8994
+	help
+	  This driver provides support for the voltage regulators on the
+	  WM8994 CODEC.
+
 config REGULATOR_DA903X
 	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
 	depends on PMIC_DA903X
drivers/regulator/Makefile +1 -0
index b3c806c..2d3838c 100644
@@ -18,6 +18,7 @@ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
+obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
drivers/regulator/wm8994-regulator.c new file +304 -0

304 lines not on this page · raw message

Signature · 1 line
1.6.6
#1 lore raw
Quoted 5 lines · Mark Brown

The WM8994 contains two LDOs with mixed hardware/software control to minimise the number of external supplies required while delivering optimal voltages to minimise power consumption.

Applied to for-2.6.34

Will move to next when mfd parts are in next.

Thanks

Liam