regulator: Add WM8994 regulator support
PATCH 1/1 regulator: Add WM8994 regulator support
The WM8994 contains two LDOs with mixed hardware/software control to minimise the number of external supplies required while delivering optimal voltages to minimise power consumption.
Signed-off-by Mark Brown <[email protected]>
--- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/wm8994-regulator.c | 304 ++++++++++++++++++++++++++++++++++ 3 files changed, 312 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/wm8994-regulator.c
drivers/regulator/Kconfig +7 -0
@@ -104,6 +104,13 @@ config REGULATOR_WM8400 This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. +config REGULATOR_WM8994 + tristate "Wolfson Microelectronics WM8994 CODEC" + depends on MFD_WM8994 + help + This driver provides support for the voltage regulators on the + WM8994 CODEC. + config REGULATOR_DA903X tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" depends on PMIC_DA903X
drivers/regulator/Makefile +1 -0
@@ -18,6 +18,7 @@ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o +obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
drivers/regulator/wm8994-regulator.c new file +304 -0
304 lines not on this page · raw message
Signature · 1 line
1.6.6
Liam Girdwood
AppliedQuoted 5 lines · Mark Brown
The WM8994 contains two LDOs with mixed hardware/software control to minimise the number of external supplies required while delivering optimal voltages to minimise power consumption.
Signed-off-by Mark Brown <[email protected]>
Applied to for-2.6.34
Will move to next when mfd parts are in next.
Thanks
Liam