2.6.33-rc3-git3: Reported regressions from 2.6.32
Subsystems (6)
This message contains a list of some regressions from 2.6.32, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.32, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to this message with CCs to the people involved in reporting and handling the issue.
Listed regressions statistics:
Date Total Pending Unresolved
----------------------------------------
2010-01-10 55 33 21 2009-12-29 36 34 27
Unresolved regressions
----------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15043
Subject : Display goes off with i915.powersave=1
Submitter : Soeren Sonnenburg <[email protected]>
Date : 2010-01-10 20:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126315457519505&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <[email protected]>
Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15038
Subject : drm/ksm: fbdev blanking regression
Submitter : Johan Hovold <[email protected]>
Date : 2010-01-06 17:00 (5 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=731b5a15a3b1474a41c2ca29b4c32b0f21bc852e
References : http://marc.info/?l=linux-kernel&m=126279726418748&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15036
Subject : soft lockup in dmesg after suspend/resume
Submitter : ykzhao <[email protected]>
Date : 2010-01-04 5:36 (7 days old)
References : http://marc.info/?l=linux-kernel&m=126258356202722&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15035
Subject : BUG: unable to handle kernel paging request in rs600_gart_set_page()
Submitter : Xiaotian Feng <[email protected]>
Date : 2010-01-05 19:10 (6 days old)
References : http://lkml.org/lkml/2010/1/5/95
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15033
Subject : drm: gem_object_free without struct_mutex
Submitter : Hugh Dickins <[email protected]>
Date : 2009-12-30 19:45 (12 days old)
References : http://marc.info/?l=linux-kernel&m=126220236201529&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15032
Subject : Oops in uart_resume_port() on resume
Submitter : Zdenek Kabelac <[email protected]>
Date : 2010-01-04 15:47 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ba15ab0e8de0d4439a91342ad52d55ca9e313f3d
References : http://marc.info/?l=linux-kernel&m=126262008815689&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14976
Subject : No sound on snd_hda_codec_via in 2.6.33-rc2
Submitter : Mark Rosenstand <[email protected]>
Date : 2010-01-02 08:27 (9 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14954
Subject : warning from alloc_pages_nodemask on boot -- caused by commit 78f1699659963fff97975df44db6d5dbe7218e55
Submitter : Stephen Hemminger <[email protected]>
Date : 2009-12-29 19:57 (13 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78f1699659963fff97975df44db6d5dbe7218e55
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14950
Subject : tbench regression with 2.6.33-rc1
Submitter : Lin Ming <[email protected]>
Date : 2009-12-25 11:11 (17 days old)
References : http://marc.info/?l=linux-kernel&m=126174044213172&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14949
Subject : drm_vm.c:drm_mmap: possible circular locking dependency detected
Submitter : Borislav Petkov <[email protected]>
Date : 2009-12-26 9:45 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182073616279&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14948
Subject : EHCI resume sysfs duplicates
Submitter : Borislav Petkov <[email protected]>
Date : 2009-12-26 9:36 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182020615709&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
Subject : All kernels after 2.6.32-git10 show only 1 CPU
Submitter : Sid Boyce <[email protected]>
Date : 2009-12-23 16:55 (19 days old)
References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14937
Subject : WARNING: at kernel/lockdep.c:2830
Submitter : Grant Wilson <[email protected]>
Date : 2009-12-27 13:35 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126192220404829&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14934
Subject : kernel crash during boot
Submitter : werner <[email protected]>
Date : 2009-12-25 5:37 (17 days old)
References : http://marc.info/?l=linux-kernel&m=126171951030608&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14925
Subject : sky2 panic under load
Submitter : Berck E. Nash <[email protected]>
Date : 2009-12-21 23:52 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126143955730347&w=4
http://marc.info/?l=linux-kernel&m=126160893126548&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14924
Subject : Weird hard hangs when rendering 'some' web-sites in Firefox
Submitter : David <[email protected]>
Date : 2009-12-21 21:53 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126143375823340&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14860
Subject : No DP-DVI output when laptop is docked
Submitter : Pär Andersson <[email protected]>
Date : 2009-12-21 21:02 (21 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14859
Subject : System timer firing too much without cause
Submitter : Shawn Starr <[email protected]>
Date : 2009-12-21 19:16 (21 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14792
Subject : Misdetection of the TV output
Submitter : Santi <[email protected]>
Date : 2009-12-12 13:28 (30 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14791
Subject : Something has been broken in the network stack this week
Submitter : Delete This Account <[email protected]>
Date : 2009-12-12 13:06 (30 days old)
Regressions with patches
------------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15039
Subject : leds_alix2: can't allocate I/O for GPIO
Submitter : Arnd Hannemann <[email protected]>
Date : 2010-01-07 10:26 (4 days old)
References : http://marc.info/?l=linux-kernel&m=126286001106257&w=4
Patch : http://patchwork.kernel.org/patch/72006/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15037
Subject : BUG during shutdown - bisected to commit e2912009
Submitter : Marc Dionne <[email protected]>
Date : 2010-01-02 0:27 (9 days old)
References : http://marc.info/?l=linux-kernel&m=126239207631034&w=4
Patch : http://patchwork.kernel.org/patch/71537/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15034
Subject : volano ~30% regression
Submitter : Lin Ming <[email protected]>
Date : 2010-01-04 8:15 (7 days old)
References : http://marc.info/?l=linux-kernel&m=126259391411982&w=4
Patch : http://patchwork.kernel.org/patch/70623/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15031
Subject : bug in fs/btrfs/ordered-data.c:672
Submitter : Carlos R. Mafra <[email protected]>
Date : 2010-01-02 11:32 (9 days old)
References : http://lkml.org/lkml/2010/1/2/17
Patch : http://www.mail-archive.com/[email protected]/msg03686.html
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15026
Subject : i915: Resume regression on MSI Wind U100 w/o KMS
Submitter : Rafael J. Wysocki <[email protected]>
Date : 2010-01-08 23:45 (3 days old)
References : http://marc.info/?l=linux-kernel&m=126299433427673&w=4
Patch : http://patchwork.kernel.org/patch/71887/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14974
Subject : tg3 does not resume from hibernation properly on BCM5787M
Submitter : Chow Loong Jin <[email protected]>
Date : 2010-01-02 05:30 (9 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=87668d352aa8d135bd695a050f18bbfc7b50b506
Patch : http://bugzilla.kernel.org/show_bug.cgi?id=14974#c12
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14957
Subject : Blank screen with KMS enabled
Submitter : Philipp Kohlbecher <[email protected]>
Date : 2009-12-30 00:08 (12 days old)
Patch : http://bugzilla.kernel.org/attachment.cgi?id=24476
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14944
Subject : 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
Submitter : fengxiangjun <[email protected]>
Date : 2009-12-21 11:12 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126139442328314&w=4
Patch : http://patchwork.kernel.org/patch/69746/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14942
Subject : gkrellm no longer shows all the temperatures on thinkpad x60
Submitter : Pavel Machek <[email protected]>
Date : 2009-12-27 21:57 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126195107005565&w=4
Patch : http://patchwork.kernel.org/patch/69809/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4
http://marc.info/?l=linux-kernel&m=126114565103300&w=4 http://marc.info/?l=linux-kbuild&m=126202819526623&w=2
Patch : http://thread.gmane.org/gmane.linux.kbuild.devel/4313/focus=4319
http://patchwork.kernel.org/patch/71957/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14899
Subject : reiserfs: inconsistent lock state
Submitter : Alexander Beregalov <[email protected]>
Date : 2009-12-11 22:06 (31 days old)
References : http://marc.info/?l=linux-kernel&m=126056920702515&w=4
Patch : http://patchwork.kernel.org/patch/67256/
http://patchwork.kernel.org/patch/67257/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14874
Subject : Ath5k regression with commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5
Submitter : Joshua Covington <[email protected]>
Date : 2009-12-25 00:49 (17 days old)
Patch : http://bugzilla.kernel.org/attachment.cgi?id=24335
For details, please visit the bug entries and follow the links given in references.
As you can see, there is a Bugzilla entry for each of the listed regressions. There also is a Bugzilla entry used for tracking the regressions from 2.6.32, unresolved as well as resolved, at:
http://bugzilla.kernel.org/show_bug.cgi?id=14885
Please let me know if there are any Bugzilla entries that should be added to the list in there.
Thanks,
Rafael
[Bug #14791] Something has been broken in the network stack this week
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14791
Subject : Something has been broken in the network stack this week
Submitter : Delete This Account <[email protected]>
Date : 2009-12-12 13:06 (30 days old)
Re: [Bug #14791] Something has been broken in the network stack this week
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14791
Subject : Something has been broken in the network stack this week
Submitter : Delete This Account <[email protected]>
Date : 2009-12-12 13:06 (30 days old)
You can mark this as Handled-by me, but I'm waiting for someone (anyone!) to verify that this can be solved by reverting changes to this driver made by commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71. The submitter has disappeared.
The patch is trivial:
drivers/net/usb/cdc_ether.c +1 -1
@@ -419,7 +419,7 @@static const struct driver_info cdc_info = { .description ="CDC Ethernet Device" , - .flags =FLAG_ETHER |FLAG_LINK_INTR , + .flags =FLAG_ETHER ,// .check_connect = cdc_check_connect, .bind = cdc_bind, .unbind = usbnet_cdc_unbind,
--- END ---
Ben.
Signature · 3 lines
Ben Hutchings
The generation of random numbers is too important to be left to chance.
- Robert CoveyouRe: [Bug #14791] Something has been broken in the network stack this week
Quoted 24 lines · Ben Hutchings
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14791
Subject : Something has been broken in the network stack this week
Submitter : Delete This Account <[email protected]>
Date : 2009-12-12 13:06 (30 days old)You can mark this as Handled-by me, but I'm waiting for someone (anyone!) to verify that this can be solved by reverting changes to this driver made by commit
37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71. The submitter has disappeared.The patch is trivial:
drivers/net/usb/cdc_ether.c
Quoted 9 lines
drivers/net/usb/cdc_ether.c +1
-2@@ -419,7 +419,7 @@static const struct driver_info cdc_info = { .description ="CDC Ethernet Device" , - .flags =FLAG_ETHER |FLAG_LINK_INTR , + .flags =FLAG_ETHER ,// .check_connect = cdc_check_connect, .bind = cdc_bind, .unbind = usbnet_cdc_unbind, --- END ---
Thanks, bug entry updated.
Rafael
PATCH 1/1 cdc_ether: Partially revert "usbnet: Set link down initially ..."
In reply to Rafael J. WysockiCommit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in
<http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state for their devices remains down. Therefore, revert the change in cdc_ether.
---
drivers/net/usb/cdc_ether.c +1 -1
@@ -419,7 +419,7 @@static const struct driver_info cdc_info = { .description ="CDC Ethernet Device" , - .flags =FLAG_ETHER |FLAG_LINK_INTR , + .flags =FLAG_ETHER ,// .check_connect = cdc_check_connect, .bind = cdc_bind, .unbind = usbnet_cdc_unbind,
Signature · 3 lines
Ben Hutchings
The generation of random numbers is too important to be left to chance.
- Robert CoveyouRe: [PATCH net-2.6] cdc_ether: Partially revert "usbnet: Set link down initially ..."
From: Ben Hutchings <[email protected]>
Date: Thu, 28 Jan 2010 23:18:44 +0000
Quoted 11 lines
Commit
37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71("usbnet: Set link down initially for drivers that update link state") changed the initial link state incdc_etherand other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in
<http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state for their devices remains down. Therefore, revert the change incdc_ether.Signed-off-by Ben Hutchings <[email protected]>Tested-by Avi Rozen <[email protected]>
Applied, thanks a lot Ben.
[Bug #14874] Ath5k regression with commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14874
Subject : Ath5k regression with commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5
Submitter : Joshua Covington <[email protected]>
Date : 2009-12-25 00:49 (17 days old)
Re: [Bug #14874] Ath5k regression with commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
This should be closed now.
Quoted 10 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14874
Subject : Ath5k regression with commit8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5Submitter : Joshua Covington <[email protected]>
Date : 2009-12-25 00:49 (17 days old)
Handled-By : Luis R. Rodriguez <[email protected]> Patch : http://bugzilla.kernel.org/attachment.cgi?id=24335
Re: [Bug #14874] Ath5k regression with commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5
Quoted 9 lines · Luis R. Rodriguez
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
This should be closed now.
The patch linked below is not present in the Linus' tree at the moment AFAICS. Has it been fixed in a different way?
Rafael
Quoted 6 lines
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14874
Subject : Ath5k regression with commit8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5
Submitter : Joshua Covington <[email protected]>
Date : 2009-12-25 00:49 (17 days old)Handled-By Luis R. Rodriguez <[email protected]>
Re: [Bug #14874] Ath5k regression with commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5
Quoted 5 lines · Rafael J. Wysocki
Quoted 4 lines · Luis R. Rodriguez
Quoted 3 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
The following bug entry is on the current list of known regressions from 2.6.32. Â Please verify if it still should be listed and let me know (either way).
This should be closed now.
The patch linked below is not present in the Linus' tree at the moment AFAICS. Has it been fixed in a different way?
That patch is just a debug patch Michael worked on to actually get some message from ath5k as to what is happening instead of it dying without notice. A patch that actually fixes the issue would still be needed, and that remains to be determined.
Luis
[Bug #14792] Misdetection of the TV output
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14792
Subject : Misdetection of the TV output
Submitter : Santi <[email protected]>
Date : 2009-12-12 13:28 (30 days old)
[Bug #14859] System timer firing too much without cause
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14859
Subject : System timer firing too much without cause
Submitter : Shawn Starr <[email protected]>
Date : 2009-12-21 19:16 (21 days old)
Re: [Bug #14859] System timer firing too much without cause
Quoted 8 lines · On Sunday 10 January 2010 17:32:53 Rafael J. Wysocki wrote:
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14859
Subject : System timer firing too much without cause
Submitter : Shawn Starr <[email protected]>
Date : 2009-12-21 19:16 (21 days old)
Yes please keep on regression list.
Thanks,
Shawn.
A message that is not in the archive (sent off-list or not yet received): 201001102222.19700.shawn.starr-bJEeYj9oJeDQT0dZR+AlfA@public.gmane.org
Re: [Bug #14859] System timer firing too much without cause
Quoted 9 lines · Shawn Starr
Quoted 8 lines · On Sunday 10 January 2010 17:32:53 Rafael J. Wysocki wrote:
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14859
Subject : System timer firing too much without cause
Submitter : Shawn Starr <[email protected]>
Date : 2009-12-21 19:16 (21 days old)Yes please keep on regression list.
OK, thanks for the update.
Rafael
Re: [Bug #14859] System timer firing too much without cause
In reply to Rafael J. WysockiQuoted 8 lines · On Sunday 10 January 2010 17:32:53 Rafael J. Wysocki wrote:
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14859
Subject : System timer firing too much without cause
Submitter : Shawn Starr <[email protected]>
Date : 2009-12-21 19:16 (21 days old)
Yes please keep on regression list.
Thanks,
Shawn.
[Bug #14924] Weird hard hangs when rendering 'some' web-sites in Firefox
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14924
Subject : Weird hard hangs when rendering 'some' web-sites in Firefox
Submitter : David <[email protected]>
Date : 2009-12-21 21:53 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126143375823340&w=4
[Bug #14907] Commit "kbuild: fix bzImage build for x86" breaks build
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4
http://marc.info/?l=linux-kernel&m=126114565103300&w=4 http://marc.info/?l=linux-kbuild&m=126202819526623&w=2
Patch : http://thread.gmane.org/gmane.linux.kbuild.devel/4313/focus=4319
http://patchwork.kernel.org/patch/71957/
Re: [Bug #14907] Commit "kbuild: fix bzImage build for x86" breaks build
Quoted 11 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4
Quoted 5 lines
http://marc.info/?l=linux-kernel&m=126114565103300&w=4 http://marc.info/?l=linux-kbuild&m=126202819526623&w=2Handled-By Jonathan Nieder <[email protected]>Patch : http://thread.gmane.org/gmane.linux.kbuild.devel/4313/focus=4319
http://patchwork.kernel.org/patch/71957/
I am using the patch without problems, but it is not in the mainline as of v2.6.33-rc3-git3. So please do keep the bug listed.
Thanks,
Jonathan
Re: [Bug #14907] Commit "kbuild: fix bzImage build for x86" breaks build
Quoted 19 lines · Jonathan Nieder
Quoted 11 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4
Quoted 2 lines
I am using the patch without problems, but it is not in the mainline as of v2.6.33-rc3-git3. So please do keep the bug listed.
I will, thanks for the update.
Rafael
Oliver Hartkopp
Tested-byRe: [Bug #14907] Commit "kbuild: fix bzImage build for x86" breaks build
Quoted 19 lines · Rafael J. Wysocki
Quoted 18 lines · Jonathan Nieder
Quoted 16 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4http://marc.info/?l=linux-kernel&m=126114565103300&w=4 http://marc.info/?l=linux-kbuild&m=126202819526623&w=2Handled-By Jonathan Nieder <[email protected]>Patch : http://thread.gmane.org/gmane.linux.kbuild.devel/4313/focus=4319
http://patchwork.kernel.org/patch/71957/
Quoted 4 lines
Quoted 2 lines
I am using the patch without problems, but it is not in the mainline as of v2.6.33-rc3-git3. So please do keep the bug listed.
I will, thanks for the update.
I just tested the patch again - and it fixes the problem.
You can add my
if you like.
Thanks,
Oliver
Re: [Bug #14907] Commit "kbuild: fix bzImage build for x86" breaks build
In reply to Jonathan NiederQuoted 19 lines · Jonathan Nieder
Quoted 11 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4
Quoted 2 lines
I am using the patch without problems, but it is not in the mainline as of v2.6.33-rc3-git3. So please do keep the bug listed.
I resent the pull request (http://lkml.org/lkml/2010/1/13/194), let's see.
Michal
Re: [Bug #14907] Commit "kbuild: fix bzImage build for x86" breaks build
Quoted 20 lines · Michal Marek
Quoted 19 lines · Jonathan Nieder
Quoted 16 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4http://marc.info/?l=linux-kernel&m=126114565103300&w=4 http://marc.info/?l=linux-kbuild&m=126202819526623&w=2Handled-By Jonathan Nieder <[email protected]>Patch : http://thread.gmane.org/gmane.linux.kbuild.devel/4313/focus=4319
http://patchwork.kernel.org/patch/71957/
Quoted 4 lines
Quoted 2 lines
I am using the patch without problems, but it is not in the mainline as of v2.6.33-rc3-git3. So please do keep the bug listed.
I resent the pull request (http://lkml.org/lkml/2010/1/13/194), let's see.
FYI:
commit 04e9e5c7659ee07f0387ddb663913fadcca88d5f
Merge: cedabed 0710520
Author: Linus Torvalds <torvalds-de/[email protected]>
Date: Wed Jan 13 16:09:59 2010 -0800
Merge branch 'for-33' of git://repo.or.cz/linux-kbuild
* 'for-33' of git://repo.or.cz/linux-kbuild:
Makefile: do not override LC_CTYPE
kbuild: really fix bzImage build with non-bash sh
Michal
Re: [Bug #14907] Commit "kbuild: fix bzImage build for x86" breaks build
Quoted 32 lines · Michal Marek
Quoted 20 lines · Michal Marek
Quoted 19 lines · Jonathan Nieder
Quoted 16 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14907
Subject : Commit "kbuild: fix bzImage build for x86" breaks build
Submitter : Oliver Hartkopp <[email protected]>
Date : 2009-12-19 19:21 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4a2ff67c88211026afcbdbc190c13f705dae1b59
References : http://marc.info/?l=linux-kernel&m=126125050622195&w=4http://marc.info/?l=linux-kernel&m=126114565103300&w=4 http://marc.info/?l=linux-kbuild&m=126202819526623&w=2Handled-By Jonathan Nieder <[email protected]>Patch : http://thread.gmane.org/gmane.linux.kbuild.devel/4313/focus=4319
http://patchwork.kernel.org/patch/71957/Quoted 4 lines
Quoted 2 lines
I am using the patch without problems, but it is not in the mainline as of v2.6.33-rc3-git3. So please do keep the bug listed.
I resent the pull request (http://lkml.org/lkml/2010/1/13/194), let's see.
FYI:
commit04e9e5c7659ee07f0387ddb663913fadcca88d5f
Merge: cedabed 0710520
Author: Linus Torvalds <[email protected]>
Date: Wed Jan 13 16:09:59 2010 -0800
Quoted 5 lines
Merge branch 'for-33' of
git://repo.or.cz/linux-kbuild* 'for-33' of
git://repo.or.cz/linux-kbuild:
Makefile: do not overrideLC_CTYPE
kbuild: really fix bzImage build with non-bash sh
Thanks, closing.
Rafael
[Bug #14860] No DP-DVI output when laptop is docked
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14860
Subject : No DP-DVI output when laptop is docked
Submitter : Pär Andersson <[email protected]>
Date : 2009-12-21 21:02 (21 days old)
Re: [Bug #14860] No DP-DVI output when laptop is docked
Quoted 3 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
It should still be listed.
I was without Internet connection last week, but that have been fixed now so I will test the patch from ykzhao ASAP.
Regards,
Pär Andersson
Re: [Bug #14860] No DP-DVI output when laptop is docked
Quoted 10 lines · Pär Andersson
Quoted 3 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
It should still be listed.
I was without Internet connection last week, but that have been fixed now so I will test the patch from ykzhao ASAP.
Thanks for the update.
Rafael
[Bug #14899] reiserfs: inconsistent lock state
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14899
Subject : reiserfs: inconsistent lock state
Submitter : Alexander Beregalov <[email protected]>
Date : 2009-12-11 22:06 (31 days old)
References : http://marc.info/?l=linux-kernel&m=126056920702515&w=4
Patch : http://patchwork.kernel.org/patch/67256/
http://patchwork.kernel.org/patch/67257/
Re: [Bug #14899] reiserfs: inconsistent lock state
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14899
Subject : reiserfs: inconsistent lock state
Submitter : Alexander Beregalov <[email protected]>
Date : 2009-12-11 22:06 (31 days old)
References : http://marc.info/?l=linux-kernel&m=126056920702515&w=4Handled-By Frederic Weisbecker <[email protected]>Patch : http://patchwork.kernel.org/patch/67256/
http://patchwork.kernel.org/patch/67257/
The fix have been pulled upstream. Would be nice to have Alexander confirmation that it's really fixed though.
Re: [Bug #14899] reiserfs: inconsistent lock state
Quoted 20 lines · Frederic Weisbecker
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14899
Subject : reiserfs: inconsistent lock state
Submitter : Alexander Beregalov <[email protected]>
Date : 2009-12-11 22:06 (31 days old)
References : http://marc.info/?l=linux-kernel&m=126056920702515&w=4Handled-By Frederic Weisbecker <[email protected]>Patch : http://patchwork.kernel.org/patch/67256/
http://patchwork.kernel.org/patch/67257/
Quoted 2 lines
The fix have been pulled upstream. Would be nice to have Alexander confirmation that it's really fixed though.
Well, I guess he can reopen the bug if the problem is still there.
Closed.
Rafael
Re: [Bug #14899] reiserfs: inconsistent lock state
In reply to Frederic Weisbecker2010/1/11 Frederic Weisbecker <[email protected]>:
Quoted 20 lines · Rafael J. Wysocki
Quoted 8 lines
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14899
Subject : reiserfs: inconsistent lock state
Submitter : Alexander Beregalov <[email protected]> Date : 2009-12-11 22:06 (31 days old)
References : http://marc.info/?l=linux-kernel&m=126056920702515&w=4
Handled-By : Frederic Weisbecker <[email protected]> Patch : http://patchwork.kernel.org/patch/67256/
http://patchwork.kernel.org/patch/67257/
Quoted 2 lines
The fix have been pulled upstream. Would be nice to have Alexander confirmation that it's really fixed though.
Yes, all warnings have disappeared. Thanks a lot.
[Bug #14934] kernel crash during boot
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14934
Subject : kernel crash during boot
Submitter : werner <[email protected]>
Date : 2009-12-25 5:37 (17 days old)
References : http://marc.info/?l=linux-kernel&m=126171951030608&w=4
[Bug #14937] WARNING: at kernel/lockdep.c:2830
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14937
Subject : WARNING: at kernel/lockdep.c:2830
Submitter : Grant Wilson <[email protected]>
Date : 2009-12-27 13:35 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126192220404829&w=4
[Bug #14925] sky2 panic under load
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14925
Subject : sky2 panic under load
Submitter : Berck E. Nash <[email protected]>
Date : 2009-12-21 23:52 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126143955730347&w=4
http://marc.info/?l=linux-kernel&m=126160893126548&w=4
Berck E. Nash
Tested-byRe: [Bug #14925] sky2 panic under load
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14925
Subject : sky2 panic under load
Submitter : Berck E. Nash <[email protected]>
Date : 2009-12-21 23:52 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126143955730347&w=4http://marc.info/?l=linux-kernel&m=126160893126548&w=4Handled-By Stephen Hemminger <[email protected]>
The patch attached to the bug report did not fix the problem, but I'm fairly certain that this one from Jarek P. did:
During TX timeout procedure dev could be awoken too early, e.g. by sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame() can run while buffers are freed causing an oops. This patch fixes it by adding netif_device_present() test in sky2_tx_complete().
With debugging by: Mike McCormack <[email protected]>
---
drivers/net/sky2.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/net/sky2.c +0 -0
@@ -1844,7 +1844,8 @@ static void sky2_tx_complete(struct sky2_port
*sky2, u16 done)
sky2->tx_cons = idx;
smp_mb();
- if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
+ /* Wake unless it's detached, and called e.g. from sky2_down() */
+ if (tx_avail(sky2) > MAX_SKB_TX_LE + 4 && netif_device_present(dev))
netif_wake_queue(dev);
}
Re: [Bug #14925] sky2 panic under load
Quoted 7 lines · Berck E. Nash
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
BTW, I don't know why Berck didn't experience such a panic before 2.6.32, but seems not a regression to me. There might be new/more sky2 TX timeouts which trigger this panic and would make a real regression.
Cheers,
Jarek P.
Quoted 46 lines
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14925
Subject : sky2 panic under load
Submitter : Berck E. Nash <[email protected]>
Date : 2009-12-21 23:52 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126143955730347&w=4http://marc.info/?l=linux-kernel&m=126160893126548&w=4Handled-By Stephen Hemminger <[email protected]>The patch attached to the bug report did not fix the problem, but I'm fairly certain that this one from Jarek P. did:
During TX timeout procedure dev could be awoken too early, e.g. by
sky2_complete_tx()called fromsky2_down(). Thensky2_xmit_frame()can run while buffers are freed causing an oops. This patch fixes it by addingnetif_device_present()test insky2_tx_complete().With debugging by: Mike McCormack <[email protected]>
Reported-by Berck E. Nash <[email protected]>Tested-by Berck E. Nash <[email protected]>Signed-off-by Jarek Poplawski <[email protected]>---
drivers/net/sky2.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)drivers/net/sky2.c +2
-1@@ -1844,7 +1844,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) sky2->tx_cons = idx;smp_mb (); -if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) +/* Wake unless it's detached, and called e.g. from sky2_down() */ +if (tx_avail (sky2) >MAX_SKB_TX_LE +4 &&netif_device_present (dev))netif_wake_queue (dev); }
Re: [Bug #14925] sky2 panic under load
Quoted 5 lines · Jarek Poplawski
Quoted 4 lines · Berck E. Nash
Quoted 3 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
BTW, I don't know why Berck didn't experience such a panic before 2.6.32, but seems not a regression to me. There might be new/more sky2 TX timeouts which trigger this panic and would make a real regression.
Even if the code has always been broken, but it's only become visible after 2.6.32, that still counts as a regression IMO, because now the users are affected who weren't before.
Rafael
Re: [Bug #14925] sky2 panic under load
Quoted 10 lines · Rafael J. Wysocki
Quoted 9 lines · Jarek Poplawski
Quoted 7 lines · Berck E. Nash
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Quoted 3 lines
BTW, I don't know why Berck didn't experience such a panic before 2.6.32, but seems not a regression to me. There might be new/more sky2 TX timeouts which trigger this panic and would make a real regression.
Even if the code has always been broken, but it's only become visible after 2.6.32, that still counts as a regression IMO, because now the users are affected who weren't before.
Right, but:
1) someone with a similar but older problem might be mislead a fix is not for them;
2) someone with exactly this one problem (i.e. Berck ;-) might be mislead "no oops" is enough, while their linux might be still worse than before. (So I intended Berck to re-consider or even re-check this problem wrt. 2.6.31, and maybe even reporting another regression.)
Jarek P.
Re: [Bug #14925] sky2 panic under load
Quoted 15 lines · Jarek Poplawski
Quoted 14 lines · Rafael J. Wysocki
Quoted 12 lines · Jarek Poplawski
Quoted 7 lines · Berck E. Nash
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
BTW, I don't know why Berck didn't experience such a panic before 2.6.32, but seems not a regression to me. There might be new/more sky2 TX timeouts which trigger this panic and would make a real regression.
Quoted 7 lines
Quoted 3 lines
Even if the code has always been broken, but it's only become visible after 2.6.32, that still counts as a regression IMO, because now the users are affected who weren't before.
Right, but:
1) someone with a similar but older problem might be mislead a fix is not for them;
Not if the fix changelog mentions the older kernels explicitly.
Quoted 5 lines
2) someone with exactly this one problem (i.e. Berck ;-) might be mislead "no oops" is enough, while their linux might be still worse than before. (So I intended Berck to re-consider or even re-check this problem wrt. 2.6.31, and maybe even reporting another regression.)
Yes, rechecking the problem with 2.6.31 would be useful.
Rafael
Re: [Bug #14925] sky2 panic under load
In reply to Jarek PoplawskiQuoted 17 lines · Jarek Poplawski
Quoted 9 lines · Rafael J. Wysocki
Quoted 8 lines · Jarek Poplawski
Quoted 7 lines · Berck E. Nash
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Quoted 3 lines
BTW, I don't know why Berck didn't experience such a panic before 2.6.32, but seems not a regression to me. There might be new/more sky2 TX timeouts which trigger this panic and would make a real regression.
Even if the code has always been broken, but it's only become visible after 2.6.32, that still counts as a regression IMO, because now the users are affected who weren't before.
Quoted 8 lines
Right, but:
1) someone with a similar but older problem might be mislead a fix is not for them;
2) someone with exactly this one problem (i.e. Berck ;-) might be mislead "no oops" is enough, while their linux might be still worse than before. (So I intended Berck to re-consider or even re-check this problem wrt. 2.6.31, and maybe even reporting another regression.)
Well, the problem with this bug is how hard it is for me to reproduce. I'm willing to admit that just because I never got it before 2.6.32 isn't proof that it wasn't there in 2.6.31. But it's a regression somewhere along the line, since I've been using this hardware for over 3 years now. There were lots of bugs in the sky2 driver years ago, but for the last 2+ years or so, I haven't had any trouble at all until now.
The bug only shows up for me with bittorrent traffic. I also use the same adapter to transfer backups over the network from several computers, and that doesn't trigger it...
I used 2.6.31 for however long it was the current stable, and I never got a crash with it. After I got several crashes in 2.6.32, I reverted to 2.6.31 until Jarek sent this patch that seems to have fixed it. I've never gotten it to crash in 2.6.31, so I'm pretty sure it's a 2.6.32 regression, but I can't prove it.
I would love to do more testing, but since I can't reproduce the bug at will, I'm not really sure what to offer?
Re: [Bug #14925] sky2 panic under load
Quoted 18 lines · Berck E. Nash
Quoted 5 lines · Jarek Poplawski
2) someone with exactly this one problem (i.e. Berck ;-) might be mislead "no oops" is enough, while their linux might be still worse than before. (So I intended Berck to re-consider or even re-check this problem wrt. 2.6.31, and maybe even reporting another regression.)
Well, the problem with this bug is how hard it is for me to reproduce. I'm willing to admit that just because I never got it before 2.6.32 isn't proof that it wasn't there in 2.6.31. But it's a regression somewhere along the line, since I've been using this hardware for over 3 years now. There were lots of bugs in the sky2 driver years ago, but for the last 2+ years or so, I haven't had any trouble at all until now.
The bug only shows up for me with bittorrent traffic. I also use the same adapter to transfer backups over the network from several computers, and that doesn't trigger it...
Quoted 8 lines
I used 2.6.31 for however long it was the current stable, and I never got a crash with it. After I got several crashes in 2.6.32, I reverted to 2.6.31 until Jarek sent this patch that seems to have fixed it. I've never gotten it to crash in 2.6.31, so I'm pretty sure it's a 2.6.32 regression, but I can't prove it.
I would love to do more testing, but since I can't reproduce the bug at will, I'm not really sure what to offer?
I mainly thought about looking at the logs during such bittorrent to compare if there is any visible change in "sky2 eth0: disabling interface"/"sky2 eth0: enabling interface" etc. frequency between 2.6.31 and 2.6.32.
Jarek P.
Re: [Bug #14925] sky2 panic under load
In reply to Berck E. NashQuoted 10 lines · Berck E. Nash
During TX timeout procedure dev could be awoken too early, e.g. by
sky2_complete_tx()called fromsky2_down(). Thensky2_xmit_frame()can run while buffers are freed causing an oops. This patch fixes it by addingnetif_device_present()test insky2_tx_complete().With debugging by: Mike McCormack <[email protected]>
Quoted 7 lines
Reported-by Berck E. Nash <[email protected]>Tested-by Berck E. Nash <[email protected]>Signed-off-by Jarek Poplawski <[email protected]>---
drivers/net/sky2.c | 3 ++-
Perhaps only sky2_tx_done should wake the queue?
Does the patch below fix the problem too?
thanks,
Mike
Subject: [PATCH] sky2: Don't wake queue in sky2_tx_complete()
We should only wake the tx queue on completion of
transmits, not after cleaning the tx ring.
--- drivers/net/sky2.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/net/sky2.c +4 -4
@@ -1843,9 +1843,6 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) sky2->tx_cons = idx;smp_mb (); - -if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) -netif_wake_queue (dev); }static void sky2_tx_reset (struct sky2_hw *hw,unsigned port)
@@ -2416,8 +2413,11 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) {struct sky2_port *sky2 =netdev_priv (dev); -if (netif_running (dev)) +if (netif_running (dev)) {sky2_tx_complete (sky2, last); +if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) +netif_wake_queue (dev); + } } static inline void sky2_skb_rx(const struct sky2_port *sky2,
-- 1.5.6.5
Re: [Bug #14925] sky2 panic under load
Quoted 6 lines · On Mon, 11 Jan 2010 23:03:41 +0900 Mike McCormack <[email protected]> wrote:
Perhaps only
sky2_tx_doneshould wake the queue?
Does the patch below fix the problem too?thanks,
Mike
The idea is good, but what if transmit queue was full (stopped), and TX FIFO gets stuck. Then Transmit timeout happens and the reset logic clears the queue. What will start the queue?
Something like this:
-----------------------------------------------------------
drivers/net/sky2.c +6 -4
@@ -1843,9 +1843,6 @@ static void sky2_tx_complete(struct sky2 sky2->tx_cons = idx;smp_mb (); - -if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) -netif_wake_queue (dev); }static void sky2_tx_reset (struct sky2_hw *hw,unsigned port)
@@ -2416,8 +2413,12 @@ static inline void sky2_tx_done(struct n {struct sky2_port *sky2 =netdev_priv (dev); -if (netif_running (dev)) +if (netif_running (dev) &&netif_device_present (dev)) {sky2_tx_complete (sky2, last); + +if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) +netif_wake_queue (dev); + } } static inline void sky2_skb_rx(const struct sky2_port *sky2,
@@ -3197,6 +3198,7 @@ static int sky2_reattach(struct net_devi }else {netif_device_attach (dev);sky2_set_multicast (dev); +netif_start_queue (dev); } }
Re: [Bug #14925] sky2 panic under load
Quoted 11 lines · Stephen Hemminger
Quoted 6 lines · On Mon, 11 Jan 2010 23:03:41 +0900 Mike McCormack <[email protected]> wrote:
Perhaps only
sky2_tx_doneshould wake the queue?
Does the patch below fix the problem too?thanks,
Mike
The idea is good,
I don't agree: you both try to make this check more specific. Actually, since this problem is quite tricky, I wondered about making it more genaral and visible for other maintainers by adding something like netif_wake_queue_present() with the check and some comment.
Jarek P.
Quoted 45 lines
but what if transmit queue was full (stopped),
and TX FIFO gets stuck. Then Transmit timeout happens and the reset logic clears the queue. What will start the queue?Something like this:
-----------------------------------------------------------drivers/net/sky2.c +6
-4@@ -1843,9 +1843,6 @@ static void sky2_tx_complete(struct sky2 sky2->tx_cons = idx;smp_mb (); - -if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) -netif_wake_queue (dev); }static void sky2_tx_reset (struct sky2_hw *hw,unsigned port)@@ -2416,8 +2413,12 @@ static inline void sky2_tx_done(struct n {struct sky2_port *sky2 =netdev_priv (dev); -if (netif_running (dev)) +if (netif_running (dev) &&netif_device_present (dev)) {sky2_tx_complete (sky2, last); + +if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) +netif_wake_queue (dev); + } } static inline void sky2_skb_rx(const struct sky2_port *sky2,@@ -3197,6 +3198,7 @@ static int sky2_reattach(struct net_devi }else {netif_device_attach (dev);sky2_set_multicast (dev); +netif_start_queue (dev); } }Signature · 1 line
--
David Miller
maintainerRe: [Bug #14925] sky2 panic under load
From: Jarek Poplawski <[email protected]>
Date: Mon, 11 Jan 2010 23:07:54 +0100
Quoted 5 lines
I don't agree: you both try to make this check more specific. Actually, since this problem is quite tricky, I wondered about making it more genaral and visible for other maintainers by adding something like
netif_wake_queue_present()with the check and some comment.
This detracts from the real problem.
The issue is that we have a code path bringing a device down, which uses helper routines which are meant to be executed when the device is up and functioning normally.
That's the bug.
No other driver does silly things like call helper routines which wake the TX queue when taking the chip down.
Fix that, not the immediate symptoms. Write a routine that unconditionally clears the TX queue, frees the packets, etc. and has none of the wake logic.
That's what most other driver do, and those that don't should be fixed similarly.
Re: [Bug #14925] sky2 panic under load
Quoted 20 lines · David Miller
From: Jarek Poplawski <[email protected]>
Date: Mon, 11 Jan 2010 23:07:54 +0100Quoted 5 lines
I don't agree: you both try to make this check more specific. Actually, since this problem is quite tricky, I wondered about making it more genaral and visible for other maintainers by adding something like
netif_wake_queue_present()with the check and some comment.This detracts from the real problem.
The issue is that we have a code path bringing a device down, which uses helper routines which are meant to be executed when the device is up and functioning normally.
That's the bug.
No other driver does silly things like call helper routines which wake the TX queue when taking the chip down.
Quoted 6 lines
Fix that, not the immediate symptoms. Write a routine that unconditionally clears the TX queue, frees the packets, etc. and has none of the wake logic.
That's what most other driver do, and those that don't should be fixed similarly.
As I wrote it's tricky and could be hard to track even if you "heard" about it, e.g. Mike moves netif_wake_queue() to another place in his last proposal, but it still can run after netif_device_detach() until napi_synchronize() in sky2_down().
I think, I can see similar problems e.g. in gianfar or netxen, where napi_disable() is done after netif_device_detach(), especially in suspend procedures (there might be less severe (than oops) effects yet). IMHO, it all looks simply error prone (sometime you have to know a driver well to track all possible paths to say it's really safe).
In the meantime users are endangered with known oopses or at least suspend problems, while we know the reasons, can fix it (even temporarily) with one-liners, but wait for the right fixes. (Btw, such fixes might require a significant rewrite, risking inserting new bugs, so I doubt they are "right" for -stable.) Anyway, I'm OK with this (I hope what should be done will be done, and I don't have sky2 ;-)
Cheers,
Jarek P.
David Miller
maintainerRe: [Bug #14925] sky2 panic under load
From: Jarek Poplawski <[email protected]>
Date: Tue, 12 Jan 2010 07:50:59 +0000
Quoted 6 lines
I think, I can see similar problems e.g. in gianfar or netxen, where
napi_disable()is done afternetif_device_detach(), especially in suspend procedures (there might be less severe (than oops) effects yet). IMHO, it all looks simply error prone (sometime you have to know a driver well to track all possible paths to say it's really safe).
Then that's an even larger bug.
Until you do napi_disable(), the device can be touched.
Asynchronous paths outside of the driver's control, even with interrupts disabled, can call back into the driver and touch the chip.
F.e. netpoll via netconsole output on another cpu
So it therefore must be done before doing the actual work of bringing the device down or suspending it.
Re: [Bug #14925] sky2 panic under load
Quoted 14 lines · David Miller
From: Jarek Poplawski <[email protected]>
Date: Tue, 12 Jan 2010 07:50:59 +0000Quoted 6 lines
I think, I can see similar problems e.g. in gianfar or netxen, where
napi_disable()is done afternetif_device_detach(), especially in suspend procedures (there might be less severe (than oops) effects yet). IMHO, it all looks simply error prone (sometime you have to know a driver well to track all possible paths to say it's really safe).Then that's an even larger bug.
Until you do
napi_disable(), the device can be touched.
Quoted 8 lines
Asynchronous paths outside of the driver's control, even with interrupts disabled, can call back into the driver and touch the chip.
F.e. netpoll via netconsole output on another cpu
So it therefore must be done before doing the actual work of bringing the device down or suspending it.
Maybe I miss something, but once more: this patch mentioned by Berck Nash has been tested by at least two users, Berck himself, and probably even more intensively by Michael Breuer, during af_packet debugging. Both guys acknowledged it helped, so it can't be that bad.
Jarek P.
David Miller
maintainerRe: [Bug #14925] sky2 panic under load
From: Jarek Poplawski <[email protected]>
Date: Tue, 12 Jan 2010 08:56:34 +0000
Quoted 4 lines
Maybe I miss something, but once more: this patch mentioned by Berck Nash has been tested by at least two users, Berck himself, and probably even more intensively by Michael Breuer, during
af_packetdebugging. Both guys acknowledged it helped, so it can't be that bad.
I agree, as a short term fix, this patch is fine.
Re: [Bug #14925] sky2 panic under load
Quoted 9 lines · David Miller
From: Jarek Poplawski <[email protected]>
Date: Tue, 12 Jan 2010 08:56:34 +0000Quoted 4 lines
Maybe I miss something, but once more: this patch mentioned by Berck Nash has been tested by at least two users, Berck himself, and probably even more intensively by Michael Breuer, during
af_packetdebugging. Both guys acknowledged it helped, so it can't be that bad.I agree, as a short term fix, this patch is fine.
And I agree real problems might be deeper.
Jarek P.
David Miller
maintainerRe: [Bug #14925] sky2 panic under load
In reply to David MillerFrom: David Miller <[email protected]>
Date: Tue, 12 Jan 2010 01:42:18 -0800 (PST)
Quoted 9 lines
From: Jarek Poplawski <[email protected]>
Date: Tue, 12 Jan 2010 08:56:34 +0000Quoted 4 lines
Maybe I miss something, but once more: this patch mentioned by Berck Nash has been tested by at least two users, Berck himself, and probably even more intensively by Michael Breuer, during
af_packetdebugging. Both guys acknowledged it helped, so it can't be that bad.I agree, as a short term fix, this patch is fine.
In case it isn't painfully obvious, I'm applying Jarek's "v2" fix and will also queue that up for -stable.
Re: [Bug #14925] sky2 panic under load
Quoted 11 lines · David Miller
From: David Miller <[email protected]>
Date: Tue, 12 Jan 2010 01:42:18 -0800 (PST)Quoted 8 lines
From: Jarek Poplawski <[email protected]>
Date: Tue, 12 Jan 2010 08:56:34 +0000Quoted 4 lines
Maybe I miss something, but once more: this patch mentioned by Berck Nash has been tested by at least two users, Berck himself, and probably even more intensively by Michael Breuer, during
af_packetdebugging. Both guys acknowledged it helped, so it can't be that bad.
Quoted 5 lines
Quoted 1 line
I agree, as a short term fix, this patch is fine.
In case it isn't painfully obvious, I'm applying Jarek's "v2" fix and will also queue that up for -stable.
Thanks!
Jarek P.
Re: [Bug #14925] sky2 panic under load
In reply to David MillerPlease hold off applying anything. I am testing a cleaner solution
PATCH 1/1 sky2: safer transmit ring cleaning
In reply to David MillerThis code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unused tx_next element
---
Please apply this instead of the various bits and pieces flying around labeled as sky2 panic under load
drivers/net/sky2.c +28 -20
@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }
@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/*
@@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part
@@ -1813,9 +1817,9 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx;BUG_ON (done >= sky2->tx_ring_size);
@@ -1828,6 +1832,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);
@@ -1836,13 +1842,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev);
@@ -1870,6 +1873,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {
@@ -1933,8 +1951,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);
@@ -2411,15 +2428,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {
@@ -4201,7 +4209,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h +0 -1
@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning
Quoted 8 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
Stephen,
Just want to confirm that this supersedes both of the patches I'm currently running with:
1. skb_may_pull
2. Nash patch
--
Mike
Re: [PATCH] sky2: safer transmit ring cleaning
Quoted 9 lines · On Tue, 12 Jan 2010 11:32:45 -0500 Michael Breuer <[email protected]> wrote:
Quoted 8 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
Quoted 7 lines
Stephen,
Just want to confirm that this supersedes both of the patches I'm currently running with:
1.
skb_may_pull
2. Nash patch
You want:
1. AF_PACKET patch that makes sure skb is not modified after send
2. This patch.
Re: [PATCH] sky2: safer transmit ring cleaning
In reply to Stephen HemmingerQuoted 5 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
Does this patch prevent re-enabling tx after netif_device_detach(), e.g. when sky2_detach() and sky2_tx_done() run at the same time on different cpus?
Jarek P.
Quoted 150 lines
Signed-off-by Stephen Hemminger <[email protected]>---
Please apply this instead of the various bits and pieces flying around labeled as sky2 panic under loaddrivers/net/sky2.c +28
-20@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,9 +1817,9 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx;BUG_ON (done >= sky2->tx_ring_size);@@ -1828,6 +1832,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,13 +1842,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev);@@ -1870,6 +1873,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1933,8 +1951,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2411,15 +2428,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -4201,7 +4209,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning
Quoted 11 lines · On Tue, 12 Jan 2010 19:04:30 +0100 Jarek Poplawski <[email protected]> wrote:
Quoted 5 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelementDoes this patch prevent re-enabling tx after
netif_device_detach(), e.g. whensky2_detach()andsky2_tx_done()run at the same time on different cpus?
Yes.
The napi is disabled during the detach so transmit completion can not be done during that period.
Re: [PATCH] sky2: safer transmit ring cleaning
Quoted 10 lines · Stephen Hemminger
Quoted 7 lines · On Tue, 12 Jan 2010 19:04:30 +0100 Jarek Poplawski <[email protected]> wrote:
Quoted 5 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
Quoted 8 lines
Quoted 4 lines
Does this patch prevent re-enabling tx after
netif_device_detach(), e.g. whensky2_detach()andsky2_tx_done()run at the same time on different cpus?Yes.
The napi is disabled during the detach so transmit completion can not be done during that period.
Could you point me where exactly the napi is disabled, probably I missed this?
Jarek P.
PATCH 1/1 sky2: safer transmit ring cleaning (v2)
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unused tx_next element
---
What is supposed to happen:
* restart sky2_restart calls napi_disable while cleaning
* dev_close we can't call napi_disable() because of two ports sharing same NAPI, so napi_synchronize() is used to make sure that any NAPI running on other CPU has completed.
* if status is reported by chip for down device, then tx_done should ignore
But, last patch was missing last step
drivers/net/sky2.c +31 -20
@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }
@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/*
@@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part
@@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (unlikely (!netif_running (dev))) +return ; +BUG_ON (done >= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;
@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);
@@ -1836,13 +1845,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev);
@@ -1870,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {
@@ -1933,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);
@@ -2411,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {
@@ -4201,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h +0 -1
@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning (v2)
Quoted 8 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
Quoted 6 lines
Signed-off-by Stephen Hemminger <[email protected]>---
What is supposed to happen:
* restartsky2_restartcallsnapi_disablewhile cleaning
Yes, but it's after the detach; similarly to sky2_suspend(). (I'm not sure how safe vs such re-enabling is sky2_set_ringparam().)
Quoted 3 lines
*
dev_closewe can't callnapi_disable()because of two ports sharing same NAPI, sonapi_synchronize()is used to make sure that any NAPI running on other CPU has completed.
So it seems still endangered.
Quoted 151 lines
* if status is reported by chip for down device, then
tx_doneshould ignoreBut, last patch was missing last step
drivers/net/sky2.c +31
-20@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (unlikely (!netif_running (dev))) +return ; +BUG_ON (done >= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,13 +1845,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev);@@ -1870,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1933,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2411,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -4201,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning (v2)
Quoted 6 lines · On Tue, 12 Jan 2010 20:16:11 +0100 Jarek Poplawski <[email protected]> wrote:
Quoted 3 lines
What is supposed to happen:
* restartsky2_restartcallsnapi_disablewhile cleaningYes, but it's after the detach; similarly to
sky2_suspend(). (I'm not sure how safe vs such re-enabling issky2_set_ringparam().
set_ringparam happens under rtnl_lock() so reset and ringparams can't conflict.
Quoted 6 lines
Quoted 4 lines
*
dev_closewe can't callnapi_disable()because of two ports sharing same NAPI, sonapi_synchronize()is used to make sure that any NAPI running on other CPU has completed.So it seems still endangered.
It was but not in revised v2 patch.
Re: [PATCH] sky2: safer transmit ring cleaning (v2)
Quoted 4 lines · Stephen Hemminger
Quoted 1 line · On Tue, 12 Jan 2010 20:16:11 +0100 Jarek Poplawski <[email protected]> wrote:
Quoted 1 line
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
What is supposed to happen:
* restartsky2_restartcallsnapi_disablewhile cleaningYes, but it's after the detach; similarly to
sky2_suspend(). (I'm not sure how safe vs such re-enabling issky2_set_ringparam().
set_ringparamhappens underrtnl_lock()so reset and ringparams can't conflict.
I didn't mean reset. I meant tx (dev_queue_xmit()) during ringparams.
Quoted 9 lines
Quoted 7 lines
Quoted 5 lines
*
dev_closewe can't callnapi_disable()because of two ports sharing same NAPI, sonapi_synchronize()is used to make sure that any NAPI running on other CPU has completed.So it seems still endangered.
It was but not in revised v2 patch.
Sorry, I meant sky2_down() (except in dev_close()).
Jarek P.
Re: [PATCH] sky2: safer transmit ring cleaning (v2)
Quoted 8 lines · On Tue, 12 Jan 2010 20:50:04 +0100 Jarek Poplawski <[email protected]> wrote:
Quoted 7 lines · Stephen Hemminger
Quoted 4 lines · On Tue, 12 Jan 2010 20:16:11 +0100 Jarek Poplawski <[email protected]> wrote:
Quoted 3 lines
What is supposed to happen:
* restartsky2_restartcallsnapi_disablewhile cleaning
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Yes, but it's after the detach; similarly to
sky2_suspend(). (I'm not sure how safe vs such re-enabling issky2_set_ringparam().
set_ringparamhappens underrtnl_lock()so reset and ringparams can't conflict.I didn't mean reset. I meant tx (
dev_queue_xmit()) during ringparams.
sky2_detach does
tx_lock
netif_detach() -- stops the queue
tx_unlock
So if another CPU was about to send, it will have to wait behind the tx_global_lock, and then it will see the queue as frozen.
BUT, you prod me to look harder and there is a race with softirq (bottom half) here that needs to be fixed.
Re: [PATCH] sky2: safer transmit ring cleaning (v2)
In reply to Stephen HemmingerQuoted 161 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelementSigned-off-by Stephen Hemminger<[email protected]>---
What is supposed to happen:
* restartsky2_restartcallsnapi_disablewhile cleaning
*dev_closewe can't callnapi_disable()because of two ports sharing same NAPI, sonapi_synchronize()is used to make sure that any NAPI running on other CPU has completed.
* if status is reported by chip for down device, thentx_doneshould ignoreBut, last patch was missing last step
drivers/net/sky2.c +31
-20@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags&TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (unlikely (!netif_running (dev))) +return ; +BUG_ON (done>= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,13 +1845,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2)>MAX_SKB_TX_LE +4 )netif_wake_queue (dev);@@ -1870,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx< sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1933,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2411,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -4201,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h struct sky2_port { · line 2192
Quoted 7 lines
drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Testing observation:
This makes no sense to me, but the DHCP multiple request/inform issue I noted with V1 of this patch is gone with V2 (this is a repeatable test). I don't see how this patch could make the difference as the device should never be down during this test. What am I missing?
Re: [PATCH] sky2: safer transmit ring cleaning
In reply to Stephen HemmingerQuoted 149 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelementSigned-off-by Stephen Hemminger<[email protected]>---
Please apply this instead of the various bits and pieces flying around labeled as sky2 panic under loaddrivers/net/sky2.c +28
-20@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags&TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,9 +1817,9 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx;BUG_ON (done>= sky2->tx_ring_size);@@ -1828,6 +1832,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,13 +1842,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2)>MAX_SKB_TX_LE +4 )netif_wake_queue (dev);@@ -1870,6 +1873,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx< sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1933,8 +1951,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2411,15 +2428,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -4201,7 +4209,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h struct sky2_port { · line 2192
Quoted 7 lines
drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Test observations:
1. DHCP request/response sequence having some issues... can't confirm that it's a result of this patch, but I don't see this with the prior patch. Prior to this patch, if I connect a new device (Blackberry in this case) I see DHCPDISCOVER;DHCPOFFER;DHCPREQUEST;DHCPACK (just the four messages). With this patch I'm seeing repeated attempts - i.e., DISCOVER/OFFER 6 times before the REQUEST/ACK. This is repeatable and happening whether or not under load. As my original problem started with DHCP packets, this seems interesting. I don't see any errors logged (dmesg, messages, etc.).
2. Probably not related to this patch, but perhaps to the driver - I've finally tracked the source of my dropped RX packets. It's happening when a sending data to a CIFS client on a MacOS system. The RX drop rate seems proportional to the TX rate for SMB to that client - at a tx rate of about 200Kb/s I see about 20 dropped RX packets/sec - at 400 I see about 40. I'm thinking therefore it's ACKs being dropped on RX. Why? no idea (yet). Nothing reported by ethtool or netstat -s remotely correlates to the number of dropped RX packets.
Re: [PATCH] sky2: safer transmit ring cleaning
Quoted 162 lines · Michael Breuer
Quoted 152 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelementSigned-off-by Stephen Hemminger<[email protected]>---
Please apply this instead of the various bits and pieces flying around labeled as sky2 panic under loaddrivers/net/sky2.c 2010-01-11 17:36:22.027429875 -0800 renamed from drivers/net/sky2.c 2010-01-11 10:49:50.907113126 -0800 +4
-2@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct /* Number of list elements available for next tx */ static inline int tx_avail(const struct sky2_port *sky2) { + /* Makes sure update of tx_prod from start_xmit and + tx_cons from tx_done are seen. */ + smp_mb(); return sky2->tx_pending - tx_inuse(sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct s return count; } -static void sky2_tx_unmap(struct pci_dev *pdev, - const struct tx_ring_info *re) +static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re) { if (re->flags& TX_MAP_SINGLE)pci_unmap_single(pdev,
pci_unmap_addr(re, mapaddr),drivers/net/sky2.c 2010-01-11 17:36:22.027429875 -0800 renamed from drivers/net/sky2.c 2010-01-11 10:49:50.907113126 -0800 +3
-1@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_dev pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), pci_unmap_len(re, maplen), PCI_DMA_TODEVICE); + re->flags = 0; } /*@@ -1804,7 +1807,8 @@ mapping_error: } /* - * Free ring elements from starting at tx_cons until "done" + * Transmit complete processing + * Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion ofmulti-part
drivers/net/sky2.c 2010-01-11 17:36:22.027429875 -0800 renamed from drivers/net/sky2.c 2010-01-11 10:49:50.907113126 -0800 +21
-17@@ -1813,9 +1817,9 @@ mapping_error: * looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete(struct sky2_port *sky2, u16 done) +static void sky2_tx_done(struct net_device *dev, u16 done) { - struct net_device *dev = sky2->netdev; + struct sky2_port *sky2 = netdev_priv(dev); unsigned idx; BUG_ON(done>= sky2->tx_ring_size);@@ -1828,6 +1832,8 @@ static void sky2_tx_complete(struct sky2 sky2_tx_unmap(sky2->hw->pdev, re); if (skb) { + re->skb = NULL; + if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done %u\n", dev->name, idx);@@ -1836,13 +1842,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len; dev_kfree_skb_any(skb); - - sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; - smp_mb(); if (tx_avail(sky2)> MAX_SKB_TX_LE + 4) netif_wake_queue(dev);@@ -1870,6 +1873,21 @@ static void sky2_tx_reset(struct sky2_hw sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); } +static void sky2_tx_clean(struct sky2_port *sky2) +{ + u16 idx; + + for (idx = 0; idx< sky2->tx_ring_size; idx++) { + struct tx_ring_info *re = sky2->tx_ring + idx; + + sky2_tx_unmap(sky2->hw->pdev, re); + if (re->skb) { + dev_kfree_skb_any(re->skb); + re->skb = NULL; + } + } +} + /* Network shutdown */ static int sky2_down(struct net_device *dev) {@@ -1933,8 +1951,7 @@ static int sky2_down(struct net_device * sky2_tx_reset(hw, port); /* Free any pending frames stuck in HW queue */ - sky2_tx_complete(sky2, sky2->tx_prod); - + sky2_tx_clean(sky2); sky2_rx_clean(sky2); sky2_free_buffers(sky2);@@ -2411,15 +2428,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done(struct net_device *dev, u16 last) -{ - struct sky2_port *sky2 = netdev_priv(dev); - - if (netif_running(dev)) - sky2_tx_complete(sky2, last); -} - static inline void sky2_skb_rx(const struct sky2_port *sky2, u32 status, struct sk_buff *skb) {@@ -4201,7 +4209,7 @@ static int sky2_debug_show(struct seq_fi /* Dump contents of tx ring */ sop = 1; - for (idx = sky2->tx_next; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; + for (idx = sky2->tx_cons; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; idx = RING_NEXT(idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx; u32 a = le32_to_cpu(le->addr);drivers/net/sky2.h 2010-01-11 17:29:28.197120484 -0800 struct sky2_port { · line 2192
Quoted 7 lines
drivers/net/sky2.h 2010-01-11 17:29:28.197120484 -0800 renamed from drivers/net/sky2.h 2010-01-11 17:29:22.817088617 -0800 +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port { u16 tx_ring_size; u16 tx_cons; /* next le to check */ u16 tx_prod; /* next le to use */ - u16 tx_next; /* debug only */ u16 tx_pending; u16 tx_last_mss;Test observations:
Quoted 7 lines
1. DHCP request/response sequence having some issues... can't confirm that it's a result of this patch, but I don't see this with the prior patch. Prior to this patch, if I connect a new device (Blackberry in this case) I see DHCPDISCOVER;DHCPOFFER;DHCPREQUEST;DHCPACK (just the four messages). With this patch I'm seeing repeated attempts - i.e., DISCOVER/OFFER 6 times before the REQUEST/ACK. This is repeatable and happening whether or not under load. As my original problem started with DHCP packets, this seems interesting. I don't see any errors logged (dmesg, messages, etc.).
2. Probably not related to this patch, but perhaps to the driver - I've finally tracked the source of my dropped RX packets. It's happening when a sending data to a CIFS client on a MacOS system. The RX drop rate seems proportional to the TX rate for SMB to that client
- at a tx rate of about 200Kb/s I see about 20 dropped RX packets/sec
- at 400 I see about 40. I'm thinking therefore it's ACKs being
dropped on RX. Why? no idea (yet). Nothing reported by ethtool or netstat -s remotely correlates to the number of dropped RX packets.
Let me add: the CIFS client from which the packets are dropped is connected via a dd-wrt router (on wifi) connected to the sky2 1G port. A Windows client connected directly to the 1G port does not exhibit the same symptoms (. I'll try later the Mac directly connected & a Wintel box over wifi if possible. The DD-WRT router (linksys wrt54g-tm) is bridged (wifi clients on same subnet as wired & serviced by DHCPD running on the linux box). This is also the source of the aforementioned perhaps-flaky DHCP connections.
Re: [PATCH] sky2: safer transmit ring cleaning
Quoted 163 lines · Michael Breuer
Quoted 162 lines · Michael Breuer
Quoted 152 lines · Stephen Hemminger
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelementSigned-off-by Stephen Hemminger<[email protected]>---
Please apply this instead of the various bits and pieces flying around labeled as sky2 panic under loaddrivers/net/sky2.c 2010-01-11 17:36:22.027429875 -0800 renamed from drivers/net/sky2.c 2010-01-11 10:49:50.907113126 -0800 +4
-2@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct /* Number of list elements available for next tx */ static inline int tx_avail(const struct sky2_port *sky2) { + /* Makes sure update of tx_prod from start_xmit and + tx_cons from tx_done are seen. */ + smp_mb(); return sky2->tx_pending - tx_inuse(sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct s return count; } -static void sky2_tx_unmap(struct pci_dev *pdev, - const struct tx_ring_info *re) +static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re) { if (re->flags& TX_MAP_SINGLE)pci_unmap_single(pdev,
pci_unmap_addr(re, mapaddr),drivers/net/sky2.c 2010-01-11 17:36:22.027429875 -0800 renamed from drivers/net/sky2.c 2010-01-11 10:49:50.907113126 -0800 +3
-1@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_dev pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), pci_unmap_len(re, maplen), PCI_DMA_TODEVICE); + re->flags = 0; } /*@@ -1804,7 +1807,8 @@ mapping_error: } /* - * Free ring elements from starting at tx_cons until "done" + * Transmit complete processing + * Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion ofmulti-part
drivers/net/sky2.c 2010-01-11 17:36:22.027429875 -0800 renamed from drivers/net/sky2.c 2010-01-11 10:49:50.907113126 -0800 +21
-17@@ -1813,9 +1817,9 @@ mapping_error: * looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete(struct sky2_port *sky2, u16 done) +static void sky2_tx_done(struct net_device *dev, u16 done) { - struct net_device *dev = sky2->netdev; + struct sky2_port *sky2 = netdev_priv(dev); unsigned idx; BUG_ON(done>= sky2->tx_ring_size);@@ -1828,6 +1832,8 @@ static void sky2_tx_complete(struct sky2 sky2_tx_unmap(sky2->hw->pdev, re); if (skb) { + re->skb = NULL; + if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done %u\n", dev->name, idx);@@ -1836,13 +1842,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len; dev_kfree_skb_any(skb); - - sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; - smp_mb(); if (tx_avail(sky2)> MAX_SKB_TX_LE + 4) netif_wake_queue(dev);@@ -1870,6 +1873,21 @@ static void sky2_tx_reset(struct sky2_hw sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); } +static void sky2_tx_clean(struct sky2_port *sky2) +{ + u16 idx; + + for (idx = 0; idx< sky2->tx_ring_size; idx++) { + struct tx_ring_info *re = sky2->tx_ring + idx; + + sky2_tx_unmap(sky2->hw->pdev, re); + if (re->skb) { + dev_kfree_skb_any(re->skb); + re->skb = NULL; + } + } +} + /* Network shutdown */ static int sky2_down(struct net_device *dev) {@@ -1933,8 +1951,7 @@ static int sky2_down(struct net_device * sky2_tx_reset(hw, port); /* Free any pending frames stuck in HW queue */ - sky2_tx_complete(sky2, sky2->tx_prod); - + sky2_tx_clean(sky2); sky2_rx_clean(sky2); sky2_free_buffers(sky2);@@ -2411,15 +2428,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done(struct net_device *dev, u16 last) -{ - struct sky2_port *sky2 = netdev_priv(dev); - - if (netif_running(dev)) - sky2_tx_complete(sky2, last); -} - static inline void sky2_skb_rx(const struct sky2_port *sky2, u32 status, struct sk_buff *skb) {@@ -4201,7 +4209,7 @@ static int sky2_debug_show(struct seq_fi /* Dump contents of tx ring */ sop = 1; - for (idx = sky2->tx_next; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; + for (idx = sky2->tx_cons; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; idx = RING_NEXT(idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx; u32 a = le32_to_cpu(le->addr);drivers/net/sky2.h 2010-01-11 17:29:28.197120484 -0800 struct sky2_port { · line 2192
Quoted 7 lines
drivers/net/sky2.h 2010-01-11 17:29:28.197120484 -0800 renamed from drivers/net/sky2.h 2010-01-11 17:29:22.817088617 -0800 +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port { u16 tx_ring_size; u16 tx_cons; /* next le to check */ u16 tx_prod; /* next le to use */ - u16 tx_next; /* debug only */ u16 tx_pending; u16 tx_last_mss;Test observations:
Quoted 8 lines
Quoted 7 lines
1. DHCP request/response sequence having some issues... can't confirm that it's a result of this patch, but I don't see this with the prior patch. Prior to this patch, if I connect a new device (Blackberry in this case) I see DHCPDISCOVER;DHCPOFFER;DHCPREQUEST;DHCPACK (just the four messages). With this patch I'm seeing repeated attempts - i.e., DISCOVER/OFFER 6 times before the REQUEST/ACK. This is repeatable and happening whether or not under load. As my original problem started with DHCP packets, this seems interesting. I don't see any errors logged (dmesg, messages, etc.).
2. Probably not related to this patch, but perhaps to the driver - I've finally tracked the source of my dropped RX packets. It's happening when a sending data to a CIFS client on a MacOS system. The RX drop rate seems proportional to the TX rate for SMB to that client
- at a tx rate of about 200Kb/s I see about 20 dropped RX packets/sec
- at 400 I see about 40. I'm thinking therefore it's ACKs being
dropped on RX. Why? no idea (yet). Nothing reported by ethtool or netstat -s remotely correlates to the number of dropped RX packets.Let me add: the CIFS client from which the packets are dropped is connected via a dd-wrt router (on wifi) connected to the sky2 1G port. A Windows client connected directly to the 1G port does not exhibit the same symptoms (. I'll try later the Mac directly connected & a Wintel box over wifi if possible. The DD-WRT router (linksys wrt54g-tm) is bridged (wifi clients on same subnet as wired & serviced by DHCPD running on the linux box). This is also the source of the aforementioned perhaps-flaky DHCP connections.
Ok - a little more on the dropped packets - only happens when connected through the wifi router - but happens using a wired connection as well (via the router's ethernet port).
From sniffer traces: I see large frames outbound (even though MTU=1500). I see the fragmented result arriving on the remote side. I see ACK's for each of the fragmented frames outbound from the Mac, but not received on the Linux side.
I also don't see any retransmissions or duplicate ACKS on either sniffer trace. I'm wondering whether there is fragmentation offload to the Yukon2, and whether the individual fragment acks are what's showing up dropped. If so, I don't understand why it would only happen with the wifi router vs. switch in the middle. Maybe the router is doing something to the packets which is causing the Yukon to forward the acks up differently? The router MTU is also 1500 on all ports, and does not show dropped packets or errors corresponding to what I'm seeing on the sky2 adapter.
PATCH 1/1 sky2: safer transmit ring cleaning (v3)
Subject: sky2: safer transmit cleanup
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unused tx_next element
---
This version adds missing _bh to sky2_detach
drivers/net/sky2.c +33 -22
@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }
@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/*
@@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part
@@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (unlikely (!netif_running (dev))) +return ; +BUG_ON (done >= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;
@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);
@@ -1836,13 +1845,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev);
@@ -1870,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {
@@ -1933,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);
@@ -2411,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {
@@ -3176,9 +3187,9 @@ static void sky2_reset(struct sky2_hw *hstatic void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock (dev); +netif_tx_lock_bh (dev);netif_device_detach (dev);/* stop txq */ -netif_tx_unlock (dev); +netif_tx_unlock_bh (dev);sky2_down (dev); } }
@@ -4201,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h +0 -1
@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning (v3)
Quoted 167 lines · Stephen Hemminger
Subject: sky2: safer transmit cleanup
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelementSigned-off-by Stephen Hemminger<[email protected]>---
This version adds missing_bhtosky2_detachdrivers/net/sky2.c +33
-22@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags&TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (unlikely (!netif_running (dev))) +return ; +BUG_ON (done>= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,13 +1845,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2)>MAX_SKB_TX_LE +4 )netif_wake_queue (dev);@@ -1870,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx< sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1933,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2411,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -3176,9 +3187,9 @@ static void sky2_reset(struct sky2_hw *hstatic void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock (dev); +netif_tx_lock_bh (dev);netif_device_detach (dev);/* stop txq */ -netif_tx_unlock (dev); +netif_tx_unlock_bh (dev);sky2_down (dev); } }@@ -4201,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h struct sky2_port { · line 2192
Quoted 7 lines
drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Will test later - just an FYI - hunk 11 depends on an earlier patch which added the netif_tx_lock(dev). I don't think that was committed.
Re: [PATCH] sky2: safer transmit ring cleaning (v3)
In reply to Stephen HemmingerQuoted 7 lines · Stephen Hemminger
Subject: sky2: safer transmit cleanup
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
I agree this patch makes it safer, but still not really safe, at least compared with the "sky2: Fix oops in sky2_xmit_frame() after TX timeout" patch.
Btw, I'm not sure adding netif_running() test to protect dev_close() is really needed, because it's after dev_deactivate(), so re-enabled tx doesn't probably matter.
Quoted 5 lines
Signed-off-by Stephen Hemminger <[email protected]>---
This version adds missing_bhtosky2_detach
As I wrote before, I doubt adding tx lock alone at this place is the proper fix for anything (the rx (napi) race is the real problem), but without this _bh it's a bug.
Jarek P.
Quoted 161 lines
drivers/net/sky2.c +33
-22@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (unlikely (!netif_running (dev))) +return ; +BUG_ON (done >= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,13 +1845,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev);@@ -1870,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1933,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2411,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -3176,9 +3187,9 @@ static void sky2_reset(struct sky2_hw *hstatic void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock (dev); +netif_tx_lock_bh (dev);netif_device_detach (dev);/* stop txq */ -netif_tx_unlock (dev); +netif_tx_unlock_bh (dev);sky2_down (dev); } }@@ -4201,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning (v3)
In reply to Stephen HemmingerQuoted 167 lines · Stephen Hemminger
Subject: sky2: safer transmit cleanup
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelementSigned-off-by Stephen Hemminger<[email protected]>---
This version adds missing_bhtosky2_detachdrivers/net/sky2.c +33
-22@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags&TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (unlikely (!netif_running (dev))) +return ; +BUG_ON (done>= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,13 +1845,10 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb ();if (tx_avail (sky2)>MAX_SKB_TX_LE +4 )netif_wake_queue (dev);@@ -1870,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx< sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1933,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2411,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -3176,9 +3187,9 @@ static void sky2_reset(struct sky2_hw *hstatic void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock (dev); +netif_tx_lock_bh (dev);netif_device_detach (dev);/* stop txq */ -netif_tx_unlock (dev); +netif_tx_unlock_bh (dev);sky2_down (dev); } }@@ -4201,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h struct sky2_port { · line 2192
Quoted 7 lines
drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Not sure why, but with this version my system is running hot (literally - higher MB temp & fan speed). This is happening at low throughput. CPU utilization is low - no apparent change from prior versions. The only indication of something amiss is seen using powertop. With older versions, I never noticed (except under load) sky2 interrupt as the main source of system activity. With this version, I see:
Top causes for wakeups:
22.9% (525.4) <kernel IPI> : Rescheduling interrupts
20.9% (480.0) <interrupt> : sky2@pci:0000:04:00.0
19.2% (439.2) <interrupt> : extra timer interrupt
18.9% (432.8) <interrupt> : sky2@pci:0000:06:00.0
10.4% (237.4) <kernel core> : hrtimer_start_range_ns (tick_sched_timer)
1.7% ( 38.8) <kernel core> : hrtimer_start (tick_sched_timer)
This is pretty consistent, btw regardless of what's going on. 4:00 is the external (100M) interface.
Total network activity while this is going on is about 70KB/sec - mostly internal.
I'm using msi interrupt (or think I am, anyway).
Also - I'm seeing what appears to be increased packet latency (not surprising) and slightly decreased throughput.
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
Subject: sky2: safer transmit cleanup
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unused tx_next element
* ignoring transmit completion if device is offline
---
This patch is against the current net-next-2.6 tree. This version handles the case of dual port shared transmit status and other cases where it is possible for tx_done to be called when device is being changed.
drivers/net/sky2.c +34 -24
@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }
@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/*
@@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part
@@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (!(netif_running (dev) &netif_device_present (dev))) +return ; +BUG_ON (done >= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;
@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);
@@ -1836,16 +1845,12 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb (); -/* Wake unless it's detached, and called e.g. from sky2_down() */ -if (tx_avail (sky2) >MAX_SKB_TX_LE +4 &&netif_device_present (dev)) +if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev); }
@@ -1871,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {
@@ -1934,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);
@@ -2412,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {
@@ -3177,9 +3187,9 @@ static void sky2_reset(struct sky2_hw *hstatic void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock (dev); +netif_tx_lock_bh (dev);netif_device_detach (dev);/* stop txq */ -netif_tx_unlock (dev); +netif_tx_unlock_bh (dev);sky2_down (dev); } }
@@ -4202,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h +0 -1
@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
Quoted 59 lines · Stephen Hemminger
Subject: sky2: safer transmit cleanup
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
* ignoring transmit completion if device is offlineSigned-off-by Stephen Hemminger <[email protected]>---
This patch is against the current net-next-2.6 tree. This version handles the case of dual port shared transmit status and other cases where it is possible fortx_doneto be called when device is being changed.drivers/net/sky2.c +7
-3@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags &TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not
drivers/net/sky2.c mapping_error: · line 1825
Quoted 10 lines
drivers/net/sky2.c +3
-2* the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (!(netif_running (dev) &netif_device_present (dev)))
This makes it safe, but it still resembles the "short term fix" according do David's opinion.
This change seems to affect dev->stats too. Since they are not updated in sky2_tx_clean(). Btw, I hope "&" is some optimization because it's less readable than "&&".
Jarek P.
Quoted 111 lines
drivers/net/sky2.c +24
-19+return ; +BUG_ON (done >= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,16 +1845,12 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb (); -/* Wake unless it's detached, and called e.g. from sky2_down() */ -if (tx_avail (sky2) >MAX_SKB_TX_LE +4 &&netif_device_present (dev)) +if (tx_avail (sky2) >MAX_SKB_TX_LE +4 )netif_wake_queue (dev); }@@ -1871,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx < sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1934,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2412,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -3177,9 +3187,9 @@ static void sky2_reset(struct sky2_hw *hstatic void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock (dev); +netif_tx_lock_bh (dev);netif_device_detach (dev);/* stop txq */ -netif_tx_unlock (dev); +netif_tx_unlock_bh (dev);sky2_down (dev); } }@@ -4202,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod && idx < sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
Quoted 2 lines · Jarek Poplawski
Quoted 1 line · Stephen Hemminger
Subject: sky2: safer transmit cleanup
...
Quoted 4 lines
drivers/net/sky2.c mapping_error: · line 1825
Quoted 1 line
drivers/net/sky2.c +1
-0+if (!(netif_running (dev) &netif_device_present (dev)))This makes it safe, but it still resembles the "short term fix" according do David's opinion.
Hmm... Actually, it's not safe, but still safer again. It looks like David was right (this time ;-). Since netif_device_present() isn't protected by a lock here, this is still racy against napi, since the flag can be set between the test and the wakeup. Btw, there is even no barrier, and in your patch this dangerous distance is made much wider.
So, now I really ;-) agree with David: this needs a proper fix.
Jarek P.
David Miller
maintainerRe: [PATCH] sky2: safer transmit ring cleaning (v4)
From: Jarek Poplawski <[email protected]>
Date: Thu, 14 Jan 2010 11:16:36 +0000
Quoted 1 line
So, now I really ;-) agree with David: this needs a proper fix.
Now Jarek, do you now see my dirty little secret?
When people disagree with me, I just silently sit around waiting for them to eventually change their mind.
Isn't it brilliant? -)
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
Quoted 11 lines · David Miller
From: Jarek Poplawski <[email protected]>
Date: Thu, 14 Jan 2010 11:16:36 +0000Quoted 1 line
So, now I really ;-) agree with David: this needs a proper fix.
Now Jarek, do you now see my dirty little secret?
When people disagree with me, I just silently sit around waiting for them to eventually change their mind.
Isn't it brilliant? -)
If it were that easy... (it never works for me :-()
Probably, there is something more... ;-)
Jarek P.
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
Quoted 7 lines · Jarek Poplawski
Quoted 6 lines · David Miller
From: Jarek Poplawski <[email protected]>
Date: Thu, 14 Jan 2010 11:16:36 +0000Quoted 1 line
So, now I really ;-) agree with David: this needs a proper fix.
Now Jarek, do you now see my dirty little secret?
Quoted 8 lines
Quoted 4 lines
When people disagree with me, I just silently sit around waiting for them to eventually change their mind.
Isn't it brilliant? -)
If it were that easy... (it never works for me :-()
Probably, there is something more... ;-)
Here's what was sitting in my tree...
Subject: [PATCH] sky2: Don't detach device when restarting
Block the tx queue from transmitting when restarting
rather than trying to take the device offline.
--- drivers/net/sky2.c | 13 +++++++++---- 1 files changed, 9 insertions(+), 4 deletions(-)
drivers/net/sky2.c +9 -4
@@ -1580,6 +1580,8 @@ static int sky2_up(struct net_device *dev)if (netif_msg_ifup (sky2)) printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); +netif_start_queue (dev); +return 0 ; err_out:
@@ -1596,6 +1598,8 @@ static inline int tx_inuse(const struct sky2_port *sky2)/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +if (unlikely (!sky2->tx_ring)) +return 0 ;return sky2->tx_pending -tx_inuse (sky2); }
@@ -1925,7 +1929,9 @@ static int sky2_down(struct net_device *dev)sky2_read32 (hw,B0_IMSK );synchronize_irq (hw->pdev->irq); -napi_synchronize (&hw->napi); +netif_tx_lock_bh (dev); +napi_disable (&hw->napi); +netif_stop_queue (dev);spin_lock_bh (&sky2->phy_lock);sky2_phy_power_down (hw, port);
@@ -1939,6 +1945,8 @@ static int sky2_down(struct net_device *dev)sky2_rx_clean (sky2);sky2_free_buffers (sky2); +napi_enable (&hw->napi); +netif_tx_unlock_bh (dev);return 0 ; }
@@ -3177,9 +3185,6 @@ static void sky2_reset(struct sky2_hw *hw)static void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock_bh (dev); -netif_device_detach (dev);/* stop txq */ -netif_tx_unlock_bh (dev);sky2_down (dev); } }
-- 1.5.6.5
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
drivers/net/sky2.c static inline int tx_inuse(const struct sky2_port *sky2) · line 1605
Quoted 12 lines · Mike McCormack
Here's what was sitting in my tree...
...
err_out:drivers/net/sky2.c +2
-0@@ -1596,6 +1598,8 @@ static inline int tx_inuse(const struct sky2_port *sky2)/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +if (unlikely (!sky2->tx_ring)) +return 0 ;return sky2->tx_pending -tx_inuse (sky2); }
This hunk (patch) conflicts with the v4 patch Stephen sent out last night. He added an smp_mb in front of the return. I'm going to give this a go with the smb_mb before the unlikely test.
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
In reply to Mike McCormackQuoted 78 lines · Mike McCormack
Quoted 10 lines · Jarek Poplawski
Quoted 8 lines · David Miller
From: Jarek Poplawski<[email protected]>
Date: Thu, 14 Jan 2010 11:16:36 +0000Quoted 2 lines
So, now I really ;-) agree with David: this needs a proper fix.
Now Jarek, do you now see my dirty little secret?
Quoted 9 lines
Quoted 5 lines
When people disagree with me, I just silently sit around waiting for them to eventually change their mind.
Isn't it brilliant? -)
If it were that easy... (it never works for me :-()
Probably, there is something more... ;-)
Here's what was sitting in my tree...
Subject: [PATCH] sky2: Don't detach device when restarting
Block the tx queue from transmitting when restarting
rather than trying to take the device offline.Signed-off-by Mike McCormack<[email protected]>--- drivers/net/sky2.c | 13 +++++++++---- 1 files changed, 9 insertions(+), 4 deletions(-)drivers/net/sky2.c +9
-1@@ -1580,6 +1580,8 @@ static int sky2_up(struct net_device *dev)if (netif_msg_ifup (sky2)) printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); +netif_start_queue (dev); +return 0 ; err_out:@@ -1596,6 +1598,8 @@ static inline int tx_inuse(const struct sky2_port *sky2)/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +if (unlikely (!sky2->tx_ring)) +return 0 ;return sky2->tx_pending -tx_inuse (sky2); }@@ -1925,7 +1929,9 @@ static int sky2_down(struct net_device *dev)sky2_read32 (hw,B0_IMSK );synchronize_irq (hw->pdev->irq); -napi_synchronize (&hw->napi); +netif_tx_lock_bh (dev); +napi_disable (&hw->napi); +netif_stop_queue (dev);spin_lock_bh (&sky2->phy_lock);sky2_phy_power_down (hw, port);@@ -1939,6 +1945,8 @@ static int sky2_down(struct net_device *dev)sky2_rx_clean (sky2);sky2_free_buffers (sky2); +napi_enable (&hw->napi); +netif_tx_unlock_bh (dev);return 0 ; }
drivers/net/sky2.c static void sky2_reset(struct sky2_hw *hw)
Quoted 10 lines
drivers/net/sky2.c +0
-4@@ -3177,9 +3185,6 @@ static void sky2_reset(struct sky2_hw *hw)static void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock_bh (dev); -netif_device_detach (dev);/* stop txq */ -netif_tx_unlock_bh (dev);sky2_down (dev); } } -- 1.5.6.5
Ok - no obvious difference with this patch + Stephen's.
I still see:
No reported errors; decent throughput; earlier issues with IRQ resolved.
But... still seeing DHCP DISCOVER/OFFER (no REQUEST/ACK) while under load. I can try to sniff this... but given that it's under load, I'd probably have to filter out non DHCP stuff and might miss whatever is really going on. Again - main point here is that absent these patches I don't see this issue. It's also possible that these two patches allow the load to be heavier thus actually causing a different problem.
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
In reply to Mike McCormackdrivers/net/sky2.c static inline int tx_inuse(const struct sky2_port *sky2) · line 1604
Quoted 8 lines · On Thu, 14 Jan 2010 22:19:39 +0900 Mike McCormack <[email protected]> wrote:
/* Number of list elements available for next tx */ static inline int
tx_avail(const struct sky2_port *sky2){drivers/net/sky2.c +2
-0+if (unlikely (!sky2->tx_ring)) +return 0 ;return sky2->tx_pending -tx_inuse (sky2); }
Breaks in detach case
Quoted 12 lines
drivers/net/sky2.c +3
-1@@ -1925,7 +1929,9 @@ static int sky2_down(struct net_device *dev)sky2_read32 (hw,B0_IMSK );synchronize_irq (hw->pdev->irq); -napi_synchronize (&hw->napi); +netif_tx_lock_bh (dev); +napi_disable (&hw->napi); +netif_stop_queue (dev);spin_lock_bh (&sky2->phy_lock);sky2_phy_power_down (hw, port);
drivers/net/sky2.c static int sky2_down(struct net_device *dev) · line 1951
Quoted 7 lines
drivers/net/sky2.c +2
-0@@ -1939,6 +1945,8 @@ static int sky2_down(struct net_device *dev)sky2_rx_clean (sky2);sky2_free_buffers (sky2); +napi_enable (&hw->napi); +netif_tx_unlock_bh (dev);return 0 ;
Breaks on dual ported boards
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
In reply to Jarek PoplawskiQuoted 6 lines · On Thu, 14 Jan 2010 10:14:45 +0000 Jarek Poplawski <[email protected]> wrote:
This makes it safe, but it still resembles the "short term fix" according do David's opinion.
This change seems to affect
dev->statstoo. Since they are not updated insky2_tx_clean(). Btw, I hope "&" is some optimization because it's less readable than "&&".
Stats don't matter for packets flushed during device reset.
The & is because in the most common case device is up, and we don't want the additional conditional branch.
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
Quoted 7 lines · Stephen Hemminger
Quoted 3 lines · On Thu, 14 Jan 2010 10:14:45 +0000 Jarek Poplawski<[email protected]> wrote:
This makes it safe, but it still resembles the "short term fix" according do David's opinion.
Quoted 9 lines
Quoted 4 lines
This change seems to affect
dev->statstoo. Since they are not updated insky2_tx_clean(). Btw, I hope "&" is some optimization because it's less readable than "&&".Stats don't matter for packets flushed during device reset.
The& is because in the most common case device is up, and we don't want the additional conditional branch.
I've been looking at what might explain the dhcp stuff - as well as the dropped packets only when there's an extra hop. I came across one path that seems suspect - although I'm really not familiar with the network stack code... that said, I'm wondering about neigh_compat_output (and eth_rebuild_header and arp_find). If I'm following things correctly (or perhaps mostly correctly), the only time anything goes this route (pun intentional) is when the packet was routed to this box. I'm guessing that bridging makes this more likely. So my dhcp stuff would all be going through here, as would the smb stuff that seemed flaky. The race I'm seeing (maybe) is that when the arp table is being rebuilt, there's a possibility that arp_find frees the skb. There's some other locking and stuff going on that seems maybe races with sky2.c in places on both the rx and tx path. I *think* it's right from looking at it, but test results suggest otherwise. Aside from the potential race, I think there's also a corner case where neigh_compat_output can return either with or without freeing the skb depending on the return from dev_hard_header... this may also be part of the race.
Maybe I've missed something... but as far as I can see, this is just about the only difference in code path taken between stuff that is working and stuff that is occasionally not.
sky2 DHCPOFFER packet loss under load (Was Re: [PATCH] sky2: safer transmit ring cleaning (v4))
Quoted 10 lines · Michael Breuer
Quoted 9 lines · Stephen Hemminger
Quoted 6 lines · On Thu, 14 Jan 2010 10:14:45 +0000 Jarek Poplawski<[email protected]> wrote:
This makes it safe, but it still resembles the "short term fix" according do David's opinion.
This change seems to affect
dev->statstoo. Since they are not updated insky2_tx_clean(). Btw, I hope "&" is some optimization because it's less readable than "&&".
Quoted 7 lines
Quoted 4 lines
Stats don't matter for packets flushed during device reset.
The& is because in the most common case device is up, and we don't want the additional conditional branch.
I've been looking at what might explain the dhcp stuff - as well as the dropped packets only when there's an extra hop. I came across one path that seems suspect - although I'm really not familiar with the network stack code... that said, I'm wondering about
neigh_compat_output(andeth_rebuild_headerandarp_find). If I'm following things correctly (or perhaps mostly correctly), the only time anything goes this route (pun intentional) is when the packet was routed to this box. I'm guessing that bridging makes this more likely. So my dhcp stuff would all be going through here, as would the smb stuff that seemed flaky. The race I'm seeing (maybe) is that when the arp table is being rebuilt, there's a possibility thatarp_findfrees the skb. There's some other locking and stuff going on that seems maybe races withsky2.cin places on both the rx and tx path. I *think* it's right from looking at it, but test results suggest otherwise. Aside from the potential race, I think there's also a corner case whereneigh_compat_outputcan return either with or without freeing the skb depending on the return fromdev_hard_header... this may also be part of the race.Maybe I've missed something... but as far as I can see, this is just about the only difference in code path taken between stuff that is working and stuff that is occasionally not.
Ok - brief update. I've confirmed that under load, outgoing DHCPOFFER packets are being silently dropped. I don't know yet where.
Test scenario, what I do know, etc.:
Scenario:
Two systems; one Gb switch; one wifi router; one Blackberry client.
System A: Linux host; Asus P6T Deluxe V2/Sky2. eth1-> internet eth0-> internal (10.0.0.1/24).
Switch: HP Procurve unmanaged - one port connected to System A; another to the wifi router; another to System B. System B: Win7; Asus M2N Deluxe SLI/ Nforce 5 (10.0.0.11)
Router: Wrt54g-tm (dd-wrt) Connected to switch & various wifi clients including a Blackberry. WEP enabled. (10.0.0.60) Blackberry Curve 8320 (wifi enabled). (10.0.0.56 via dhcp lease)
Test that causes packet loss:
1. Turn off BB wifi.
2. Start copy of large files (4GB) from System B to an CIFS share on System A.
3. Start nethogs on system A.
4. Start tcpdump on the wifi router (interface br0 - wired 10.0.0.60 connection)
5. Start wireshark on System A
6. tail system A /var/log/messages - watching for DHCP activity
7. When smb traffic load (incoming) exceeds 40,000KBPS (nethogs) - enable wifi on the blackberry.
8. Stop test after multiple DHCPDISCOVER/OFFER observed without REQUEST/ACK.
Results:
1. It seems that the problem occurs intermittently below 40,000KBPS, and consistently over that number as reported by nethogs. Lots of fluctuation, so figure that the 40k is approximate.
2. wireshark (system A) shows DHCPOFFER traffic outgoing.
3. tcpdump (wifi - wired incoming interface) does NOT show DHCPOFFER traffic when this problem occurs.
4. Both traces show arp activity during the DISCOVER/OFFER sequence.
5. There is no evidence of tx errors or packet drops, in any statistics I can find.
Thoughts:
I still think there's a race happening between the arp neighbor update and sky2. Might be higher up, but as I'm seeing the outgoing packets when sniffing eth0, can't be too much higher up. This problem seems to be exacerbated by the more recent patches, however I believe that this is a result of the higher throughput achievable with these patches. With the older set, I saw this problem less frequently, but found it much harder to get over the 40K RX number.
I am also seeing (as previously reported - but haven't sniffed yet) SMB ACK dropped packets, but only when traversing the wifi router. Not sure if this is related, but hey, you never know.
Re: [PATCH] sky2: safer transmit ring cleaning (v4)
In reply to Stephen HemmingerQuoted 174 lines · Stephen Hemminger
Subject: sky2: safer transmit cleanup
This code makes transmit path and transmit reset safer by:
* adding memory barrier before checking available ring slots
* reseting state of tx ring elements after free
* seperate cleanup function from ring done function
* removing mostly unusedtx_nextelement
* ignoring transmit completion if device is offlineSigned-off-by Stephen Hemminger<[email protected]>---
This patch is against the current net-next-2.6 tree. This version handles the case of dual port shared transmit status and other cases where it is possible fortx_doneto be called when device is being changed.drivers/net/sky2.c +34
-24@@ -1596,6 +1596,9 @@ static inline int tx_inuse(const struct/* Number of list elements available for next tx */ static inline int tx_avail (const struct sky2_port *sky2) { +/* Makes sure update of tx_prod from start_xmit and +tx_cons from tx_done are seen. */ +smp_mb ();return sky2->tx_pending -tx_inuse (sky2); }@@ -1618,8 +1621,7 @@ static unsigned tx_le_req(const struct sreturn count; } -static void sky2_tx_unmap (struct pci_dev *pdev, -const struct tx_ring_info *re) +static void sky2_tx_unmap (struct pci_dev *pdev,struct tx_ring_info *re) {if (re->flags&TX_MAP_SINGLE ) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),@@ -1629,6 +1631,7 @@ static void sky2_tx_unmap(struct pci_devpci_unmap_page (pdev,pci_unmap_addr (re, mapaddr),pci_unmap_len (re, maplen),PCI_DMA_TODEVICE ); + re->flags =0 ; }/* @@ -1804,7 +1807,8 @@ mapping_error: }/* -* Free ring elements from starting at tx_cons until "done" +* Transmit complete processing +* Free ring elements from starting at tx_cons until done index * * NB: * 1. The hardware will tell us about partial completion of multi-part @@ -1813,11 +1817,14 @@ mapping_error:* looks at the tail of the queue of FIFO (tx_cons), not * the head (tx_prod) */ -static void sky2_tx_complete (struct sky2_port *sky2,u16 done) +static void sky2_tx_done (struct net_device *dev,u16 done) { -struct net_device *dev = sky2->netdev; +struct sky2_port *sky2 =netdev_priv (dev);unsigned idx; +if (!(netif_running (dev)&netif_device_present (dev))) +return ; +BUG_ON (done>= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done;@@ -1828,6 +1835,8 @@ static void sky2_tx_complete(struct sky2sky2_tx_unmap (sky2->hw->pdev, re);if (skb) { + re->skb =NULL ; +if (unlikely (netif_msg_tx_done (sky2)))printk (KERN_DEBUG "%s: tx done %u\n" , dev->name, idx);@@ -1836,16 +1845,12 @@ static void sky2_tx_complete(struct sky2 dev->stats.tx_bytes += skb->len;dev_kfree_skb_any (skb); - - sky2->tx_next =RING_NEXT (idx, sky2->tx_ring_size); } } sky2->tx_cons = idx; -smp_mb (); -/* Wake unless it's detached, and called e.g. from sky2_down() */ -if (tx_avail (sky2)>MAX_SKB_TX_LE +4 &&netif_device_present (dev)) +if (tx_avail (sky2)>MAX_SKB_TX_LE +4 )netif_wake_queue (dev); }@@ -1871,6 +1876,21 @@ static void sky2_tx_reset(struct sky2_hwsky2_write8 (hw,SK_REG (port,TX_GMF_CTRL_T ),GMF_RST_SET ); } +static void sky2_tx_clean (struct sky2_port *sky2) +{ +u16 idx; + +for (idx =0 ; idx< sky2->tx_ring_size; idx++) { +struct tx_ring_info *re = sky2->tx_ring + idx; + +sky2_tx_unmap (sky2->hw->pdev, re); +if (re->skb) { +dev_kfree_skb_any (re->skb); + re->skb =NULL ; + } + } +} +/* Network shutdown */ static int sky2_down (struct net_device *dev) {@@ -1934,8 +1954,7 @@ static int sky2_down(struct net_device *sky2_tx_reset (hw, port);/* Free any pending frames stuck in HW queue */ -sky2_tx_complete (sky2, sky2->tx_prod); - +sky2_tx_clean (sky2);sky2_rx_clean (sky2);sky2_free_buffers (sky2);@@ -2412,15 +2431,6 @@ error: goto resubmit; } -/* Transmit complete */ -static inline void sky2_tx_done (struct net_device *dev,u16 last) -{ -struct sky2_port *sky2 =netdev_priv (dev); - -if (netif_running (dev)) -sky2_tx_complete (sky2, last); -} -static inline void sky2_skb_rx (const struct sky2_port *sky2,u32 status,struct sk_buff *skb) {@@ -3177,9 +3187,9 @@ static void sky2_reset(struct sky2_hw *hstatic void sky2_detach (struct net_device *dev) {if (netif_running (dev)) { -netif_tx_lock (dev); +netif_tx_lock_bh (dev);netif_device_detach (dev);/* stop txq */ -netif_tx_unlock (dev); +netif_tx_unlock_bh (dev);sky2_down (dev); } }@@ -4202,7 +4212,7 @@ static int sky2_debug_show(struct seq_fi/* Dump contents of tx ring */ sop =1 ; -for (idx = sky2->tx_next; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; +for (idx = sky2->tx_cons; idx != sky2->tx_prod&& idx< sky2->tx_ring_size; idx =RING_NEXT (idx, sky2->tx_ring_size)) {const struct sky2_tx_le *le = sky2->tx_le + idx;u32 a =le32_to_cpu (le->addr);
drivers/net/sky2.h struct sky2_port { · line 2192
Quoted 7 lines
drivers/net/sky2.h +0
-1@@ -2187,7 +2187,6 @@ struct sky2_port {u16 tx_ring_size;u16 tx_cons;/* next le to check */ u16 tx_prod;/* next le to use */ -u16 tx_next;/* debug only */ u16 tx_pending;u16 tx_last_mss;
Tested this a bit (w/o Mike's patch from this morning). Overall, works (vs. v3), but still something flaky going on WRT dhcp traffic:
Under load (and only under load) I'm seeing mutliple failed dhcp client requests - 4-6 discover/offer sequences before I see request/ack. I don't see errors, dropped packets, etc., at the time this is happening. I'd blow it off to load, but I don't see this with the earlier (pskb_may_pull) patch.
Going to rebuild with the inclusion of Mike's patch and see what happens.
Re: [Bug #14925] sky2 panic under load
In reply to Stephen HemmingerQuoted 46 lines · Stephen Hemminger
Quoted 6 lines · On Mon, 11 Jan 2010 23:03:41 +0900 Mike McCormack <[email protected]> wrote:
Perhaps only
sky2_tx_doneshould wake the queue?
Does the patch below fix the problem too?thanks,
Mike
The idea is good, but what if transmit queue was full (stopped), and TX FIFO gets stuck. Then Transmit timeout happens and the reset logic clears the queue. What will start the queue?
Something like this:
-----------------------------------------------------------drivers/net/sky2.c +5
-4@@ -1843,9 +1843,6 @@ static void sky2_tx_complete(struct sky2 sky2->tx_cons = idx;smp_mb (); - -if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) -netif_wake_queue (dev); }static void sky2_tx_reset (struct sky2_hw *hw,unsigned port)@@ -2416,8 +2413,12 @@ static inline void sky2_tx_done(struct n {struct sky2_port *sky2 =netdev_priv (dev); -if (netif_running (dev)) +if (netif_running (dev) &&netif_device_present (dev)) {sky2_tx_complete (sky2, last); + +if (tx_avail (sky2) >MAX_SKB_TX_LE +4 ) +netif_wake_queue (dev); + } } static inline void sky2_skb_rx(const struct sky2_port *sky2,
drivers/net/sky2.c static int sky2_reattach(struct net_devi · line 3201
Quoted 4 lines
drivers/net/sky2.c +1
-0@@ -3197,6 +3198,7 @@ static int sky2_reattach(struct net_devi }else {netif_device_attach (dev);sky2_set_multicast (dev); +netif_start_queue (dev);
Why netif_device_attach() is not enough?
Jarek P.
[Bug #14948] EHCI resume sysfs duplicates
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14948
Subject : EHCI resume sysfs duplicates
Submitter : Borislav Petkov <[email protected]>
Date : 2009-12-26 9:36 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182020615709&w=4
Re: [Bug #14948] EHCI resume sysfs duplicates
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14948
Subject : EHCI resume sysfs duplicates
Submitter : Borislav Petkov <petkovbb-gM/[email protected]>
Date : 2009-12-26 9:36 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182020615709&w=4
Preliminary and tested fix is at LKML-Reference: <20100105220829.GA31569@xanatos>
Signature · 2 lines
Regards/Gruss,
Boris.Re: [Bug #14948] EHCI resume sysfs duplicates
Quoted 9 lines · Borislav Petkov
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14948
Subject : EHCI resume sysfs duplicates
Submitter : Borislav Petkov <[email protected]>
Date : 2009-12-26 9:36 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182020615709&w=4Preliminary and tested fix is at LKML-Reference: <20100105220829.GA31569@xanatos>
Sorry, I don't know how to resolve that.
Rafael
Re: [Bug #14948] EHCI resume sysfs duplicates
Quoted 16 lines · Rafael J. Wysocki
Quoted 15 lines · Borislav Petkov
Quoted 13 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14948
Subject : EHCI resume sysfs duplicates
Submitter : Borislav Petkov <petkovbb-gM/[email protected]>
Date : 2009-12-26 9:36 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182020615709&w=4
Quoted 3 lines
Quoted 1 line
Preliminary and tested fix is at LKML-Reference: <20100105220829.GA31569@xanatos>
Sorry, I don't know how to resolve that.
Sorry about that. One way to resolve it would be:
http://marc.info/?i=<LKML-Reference>, i.e.
http://marc.info/?i=20100105220829.GA31569@xanatos
for example, which should get rewritten to
http://marc.info/?l=linux-usb&m=126272933202894
I'm sure there are other ways though.
Signature · 2 lines
Regards/Gruss,
Boris.Re: [Bug #14948] EHCI resume sysfs duplicates
Quoted 23 lines · Borislav Petkov
Quoted 16 lines · Rafael J. Wysocki
Quoted 15 lines · Borislav Petkov
Quoted 13 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14948
Subject : EHCI resume sysfs duplicates
Submitter : Borislav Petkov <[email protected]>
Date : 2009-12-26 9:36 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182020615709&w=4Quoted 3 lines
Quoted 1 line
Preliminary and tested fix is at LKML-Reference: <20100105220829.GA31569@xanatos>
Sorry, I don't know how to resolve that.
Sorry about that. One way to resolve it would be:
Quoted 7 lines
http://marc.info/?i=<LKML-Reference>, i.e.
http://marc.info/?i=20100105220829.GA31569@xanatos
for example, which should get rewritten to
Thanks, this works.
Bug entry updated.
Rafael
[Bug #14942] gkrellm no longer shows all the temperatures on thinkpad x60
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14942
Subject : gkrellm no longer shows all the temperatures on thinkpad x60
Submitter : Pavel Machek <[email protected]>
Date : 2009-12-27 21:57 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126195107005565&w=4
Re: [Bug #14942] gkrellm no longer shows all the temperatures on thinkpad x60
Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14942
Subject : gkrellm no longer shows all the temperatures on thinkpad x60
Submitter : Pavel Machek <[email protected]>
Date : 2009-12-27 21:57 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126195107005565&w=4
Waiting for Pavel to confirm whether this can be closed or not. There could be more than one bug involved, and I only fixed one.
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Re: [Bug #14942] gkrellm no longer shows all the temperatures on thinkpad x60
Quoted 11 lines · Henrique de Moraes Holschuh
Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14942
Subject : gkrellm no longer shows all the temperatures on thinkpad x60
Submitter : Pavel Machek <[email protected]>
Date : 2009-12-27 21:57 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126195107005565&w=4Waiting for Pavel to confirm whether this can be closed or not. There could be more than one bug involved, and I only fixed one.
OK, thanks for the update.
Rafael
Re: [Bug #14942] gkrellm no longer shows all the temperatures on thinkpad x60
In reply to Henrique de Moraes HolschuhQuoted 11 lines · Rafael J. Wysocki
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14942
Subject : gkrellm no longer shows all the temperatures on thinkpad x60
Submitter : Pavel Machek <[email protected]>
Date : 2009-12-27 21:57 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126195107005565&w=4Waiting for Pavel to confirm whether this can be closed or not. There could be more than one bug involved, and I only fixed one.
Can be closed; it seems that gkrellm removed the graphs after it failed once, or something like that.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [Bug #14942] gkrellm no longer shows all the temperatures on thinkpad x60
Quoted 9 lines · Pavel Machek
Quoted 9 lines · Rafael J. Wysocki
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14942
Subject : gkrellm no longer shows all the temperatures on thinkpad x60
Submitter : Pavel Machek <[email protected]>
Date : 2009-12-27 21:57 (15 days old)
References : http://marc.info/?l=linux-kernel&m=126195107005565&w=4
Quoted 5 lines
Quoted 2 lines
Waiting for Pavel to confirm whether this can be closed or not. There could be more than one bug involved, and I only fixed one.
Can be closed; it seems that gkrellm removed the graphs after it failed once, or something like that.
Thanks, already closed.
Rafael
[Bug #14944] 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14944
Subject : 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
Submitter : fengxiangjun <[email protected]>
Date : 2009-12-21 11:12 (21 days old)
References : http://marc.info/?l=linux-kernel&m=126139442328314&w=4
[Bug #14946] All kernels after 2.6.32-git10 show only 1 CPU
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
Subject : All kernels after 2.6.32-git10 show only 1 CPU
Submitter : Sid Boyce <[email protected]>
Date : 2009-12-23 16:55 (19 days old)
References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4
Re: [Bug #14946] All kernels after 2.6.32-git10 show only 1 CPU
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
Subject : All kernels after 2.6.32-git10 show only 1 CPU
Submitter : Sid Boyce <[email protected]>
Date : 2009-12-23 16:55 (19 days old)
References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4
With 2.6.33-rc3-git3 I now see 2 CPU's every on a normal boot, but its locking up solid at this part of the boot process as usual.
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22.
With acpi=noirq (2 CPU's)
================
kvm: Nested Virtualization enabled.
IT8716 Super IO detectedParport_PC 00:0a: reported by plug and Play ACPI
Parport 0: PC-Style at 0x378, irq 7 [PCSPP, TRISTATE,EPP]
parport: irq 7 in use, resorting to polled operation
HDA Intel 0000:00:0e.1: PCI -> APIC IRQ transform: INT B -> IRQ 11
With acpi=ht (1 CPU)
=============
Hangs at:-
Loading drivees, configuring devices do_IRQ: 0.65 No irq handler for vector (irq -1)
With acpi=off (2 CPU's)
========================
Hangs at same point as with acpi=noirq.
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION="-smp"CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
CONFIG_TREE_RCU=yCONFIG_RCU_FANOUT=64CONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=18CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_RT_GROUP_SCHED=yCONFIG_CGROUP_SCHED=yCONFIG_CGROUPS=yCONFIG_CGROUP_NS=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=yCONFIG_CGROUP_MEM_RES_CTLR=yCONFIG_MM_OWNER=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_EVENTS=yCONFIG_EVENT_PROFILE=yCONFIG_PERF_COUNTERS=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=yCONFIG_COMPAT_BRK=yCONFIG_SLUB=yCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=mCONFIG_OPROFILE_EVENT_MULTIPLEX=yCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_USER_RETURN_NOTIFIER=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_SLOW_WORK=yCONFIG_SLOW_WORK_DEBUG=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLOCK_COMPAT=y
CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_CFQ=yCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_INLINE_SPIN_UNLOCK=yCONFIG_INLINE_SPIN_UNLOCK_IRQ=yCONFIG_INLINE_READ_UNLOCK=yCONFIG_INLINE_READ_UNLOCK_IRQ=yCONFIG_INLINE_WRITE_UNLOCK=yCONFIG_INLINE_WRITE_UNLOCK_IRQ=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_FREEZER=y
CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=yCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=yCONFIG_X86_SUPPORTS_MEMORY_FAILURE=yCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_PARAVIRT_GUEST=yCONFIG_XEN=yCONFIG_XEN_MAX_DOMAIN_MEMORY=32CONFIG_XEN_SAVE_RESTORE=yCONFIG_XEN_DEBUG_FS=yCONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=yCONFIG_MEMTEST=yCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=7CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_AMD_IOMMU=yCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_IOMMU_API=yCONFIG_NR_CPUS=128CONFIG_SCHED_MC=yCONFIG_PREEMPT_VOLUNTARY=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_X86_CPU_DEBUG=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_X86_64_ACPI_NUMA=yCONFIG_NODES_SPAN_OTHER_NODES=yCONFIG_NODES_SHIFT=9CONFIG_ARCH_PROC_KCORE_TEXT=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=yCONFIG_MEMORY_FAILURE=yCONFIG_HWPOISON_INJECT=yCONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=yCONFIG_EFI=yCONFIG_SECCOMP=yCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=yCONFIG_PHYSICAL_START=0x200000CONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=yCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION_NVS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_RUNTIME=yCONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=yCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_POWER_METER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=mCONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=mCONFIG_ACPI_THERMAL=mCONFIG_ACPI_NUMA=yCONFIG_ACPI_CUSTOM_DSDT_FILE=""CONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_PCI_SLOT=mCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=m
CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=yCONFIG_CPU_FREQ_STAT=mCONFIG_CPU_FREQ_STAT_DETAILS=yCONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=yCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_POWERSAVE=mCONFIG_CPU_FREQ_GOV_USERSPACE=mCONFIG_CPU_FREQ_GOV_ONDEMAND=yCONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_X86_ACPI_CPUFREQ=mCONFIG_X86_POWERNOW_K8=m
CONFIG_CPU_IDLE=yCONFIG_CPU_IDLE_GOV_LADDER=yCONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_PCIEAER=yCONFIG_PCIE_ECRC=yCONFIG_PCIEAER_INJECT=mCONFIG_PCIEASPM=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=yCONFIG_HT_IRQ=yCONFIG_PCI_IOV=yCONFIG_PCI_IOAPIC=yCONFIG_ISA_DMA_API=yCONFIG_K8_NB=y
CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=yCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=yCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_LRO=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_DEFAULT_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_IPV6=mCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_SIT=mCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CT_PROTO_DCCP=mCONFIG_NF_CT_PROTO_GRE=mCONFIG_NF_CT_PROTO_SCTP=mCONFIG_NF_CT_PROTO_UDPLITE=mCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=mCONFIG_NETFILTER_TPROXY=mCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_TPROXY=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=mCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_SOCKET=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=mCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_IP_VS=mCONFIG_IP_VS_TAB_BITS=12
CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=mCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PROTO_DCCP=mCONFIG_NF_NAT_PROTO_GRE=mCONFIG_NF_NAT_PROTO_UDPLITE=mCONFIG_NF_NAT_PROTO_SCTP=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_NF_NAT_SIP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=mCONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_IP6=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=mCONFIG_BRIDGE_EBT_NFLOG=mCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_CCID3=yCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_SCTP=mCONFIG_SCTP_HMAC_MD5=yCONFIG_RDS=mCONFIG_RDS_TCP=mCONFIG_STP=mCONFIG_GARP=mCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=yCONFIG_LLC=mCONFIG_LLC2=mCONFIG_IPX=mCONFIG_IPX_INTERN=yCONFIG_IEEE802154=mCONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_INGRESS=m
CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_SCH_FIFO=y
CONFIG_NET_PKTGEN=mCONFIG_NET_TCPPROBE=mCONFIG_HAMRADIO=y
CONFIG_AX25=mCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=mCONFIG_ROSE=m
CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_YAM=mCONFIG_IRDA=m
CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=mCONFIG_IRDA_ULTRA=y
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRTTY_SIR=m
CONFIG_DONGLE=yCONFIG_ESI_DONGLE=mCONFIG_ACTISYS_DONGLE=mCONFIG_TEKRAM_DONGLE=mCONFIG_TOIM3232_DONGLE=mCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=mCONFIG_OLD_BELKIN_DONGLE=mCONFIG_ACT200L_DONGLE=mCONFIG_KINGSUN_DONGLE=mCONFIG_KSDAZZLE_DONGLE=mCONFIG_KS959_DONGLE=m
CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=mCONFIG_NSC_FIR=mCONFIG_WINBOND_FIR=mCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=mCONFIG_MCS_FIR=mCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_HIDP=m
CONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIVHCI=mCONFIG_BT_MRVL=mCONFIG_BT_MRVL_SDIO=mCONFIG_AF_RXRPC=mCONFIG_RXKAD=mCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yCONFIG_CFG80211=mCONFIG_CFG80211_REG_DEBUG=yCONFIG_CFG80211_DEFAULT_PS=yCONFIG_CFG80211_DEBUGFS=yCONFIG_CFG80211_WEXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=mCONFIG_LIB80211_CRYPT_WEP=mCONFIG_LIB80211_CRYPT_CCMP=mCONFIG_LIB80211_CRYPT_TKIP=mCONFIG_MAC80211=mCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=yCONFIG_WIMAX=mCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
CONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_SYS_HYPERVISOR=yCONFIG_CONNECTOR=mCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=yCONFIG_PARPORT_AX88796=mCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=mCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_SX8=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=128000CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=yCONFIG_XEN_BLKDEV_FRONTEND=yCONFIG_VIRTIO_BLK=mCONFIG_MISC_DEVICES=yCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=mCONFIG_ENCLOSURE_SERVICES=mCONFIG_DS1682=m
CONFIG_EEPROM_AT24=mCONFIG_EEPROM_LEGACY=mCONFIG_EEPROM_MAX6875=mCONFIG_EEPROM_93CX6=mCONFIG_CB710_CORE=mCONFIG_CB710_DEBUG_ASSUMPTIONS=yCONFIG_HAVE_IDE=y
CONFIG_RAID_ATTRS=mCONFIG_SCSI=mCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=mCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=yCONFIG_SCSI_SRP_ATTRS=mCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_SCSI_BNX2_ISCSI=mCONFIG_SCSI_MVSAS=mCONFIG_SCSI_MVSAS_DEBUG=yCONFIG_LIBFC=mCONFIG_LIBFCOE=mCONFIG_SCSI_DH=mCONFIG_ATA=mCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=mCONFIG_ATA_SFF=yCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=mCONFIG_SATA_VIA=mCONFIG_PATA_ACPI=mCONFIG_PATA_AMD=mCONFIG_PATA_ATP867X=mCONFIG_ATA_GENERIC=mCONFIG_PATA_JMICRON=mCONFIG_PATA_MARVELL=mCONFIG_PATA_PDC2027X=mCONFIG_PATA_VIA=mCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MULTICORE_RAID456=yCONFIG_MD_RAID6_PQ=mCONFIG_ASYNC_RAID6_TEST=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=mCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_QL=mCONFIG_DM_MULTIPATH_ST=mCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=y
CONFIG_IEEE1394=mCONFIG_IEEE1394_OHCI1394=mCONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_SBP2=mCONFIG_IEEE1394_ETH1394_ROM_ENTRY=yCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_RAWIO=mCONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_DV1394=mCONFIG_NETDEVICES=yCONFIG_IFB=mCONFIG_BONDING=mCONFIG_MACVLAN=mCONFIG_EQUALIZER=mCONFIG_TUN=mCONFIG_PHYLIB=m
CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_BROADCOM_PHY=mCONFIG_REALTEK_PHY=mCONFIG_NATIONAL_PHY=mCONFIG_STE10XP=mCONFIG_LSI_ET1011C_PHY=mCONFIG_NET_ETHERNET=yCONFIG_MII=mCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=mCONFIG_TYPHOON=mCONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_AMD8111_ETH=mCONFIG_ADAPTEC_STARFIRE=mCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_FORCEDETH=mCONFIG_FORCEDETH_NAPI=yCONFIG_E100=mCONFIG_8139CP=mCONFIG_8139TOO=mCONFIG_8139TOO_8129=yCONFIG_NETDEV_1000=yCONFIG_E1000=mCONFIG_E1000E=mCONFIG_R8169=mCONFIG_R8169_VLAN=yCONFIG_SKY2=mCONFIG_VIA_VELOCITY=mCONFIG_TIGON3=mCONFIG_BNX2=mCONFIG_CNIC=mCONFIG_JME=mCONFIG_WLAN=yCONFIG_LIBERTAS_THINFIRM=mCONFIG_LIBERTAS_THINFIRM_USB=mCONFIG_AIRO=mCONFIG_ATMEL=mCONFIG_PCI_ATMEL=mCONFIG_AT76C50X_USB=mCONFIG_PRISM54=mCONFIG_USB_ZD1201=mCONFIG_USB_NET_RNDIS_WLAN=mCONFIG_RTL8180=mCONFIG_RTL8187=mCONFIG_RTL8187_LEDS=yCONFIG_ADM8211=mCONFIG_MAC80211_HWSIM=mCONFIG_MWL8K=mCONFIG_ATH_COMMON=mCONFIG_ATH5K=mCONFIG_ATH9K_HW=mCONFIG_ATH9K_COMMON=mCONFIG_ATH9K=mCONFIG_B43=mCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=yCONFIG_B43_SDIO=yCONFIG_B43_PIO=yCONFIG_B43_PHY_LP=yCONFIG_B43_LEDS=yCONFIG_B43_HWRNG=yCONFIG_B43LEGACY=mCONFIG_B43LEGACY_PCI_AUTOSELECT=yCONFIG_B43LEGACY_PCICORE_AUTOSELECT=yCONFIG_B43LEGACY_LEDS=yCONFIG_B43LEGACY_HWRNG=yCONFIG_B43LEGACY_DMA=yCONFIG_B43LEGACY_PIO=yCONFIG_B43LEGACY_DMA_AND_PIO_MODE=yCONFIG_HOSTAP=mCONFIG_HOSTAP_FIRMWARE=yCONFIG_HOSTAP_FIRMWARE_NVRAM=yCONFIG_HOSTAP_PLX=mCONFIG_HOSTAP_PCI=mCONFIG_IPW2100=mCONFIG_IPW2100_MONITOR=yCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=yCONFIG_LIBIPW=mCONFIG_IWLWIFI=mCONFIG_IWLAGN=mCONFIG_IWL4965=yCONFIG_IWL5000=yCONFIG_IWL3945=mCONFIG_IWL3945_SPECTRUM_MEASUREMENT=yCONFIG_LIBERTAS=mCONFIG_LIBERTAS_USB=mCONFIG_LIBERTAS_SDIO=mCONFIG_HERMES=mCONFIG_HERMES_CACHE_FW_ON_INIT=yCONFIG_PLX_HERMES=mCONFIG_TMD_HERMES=mCONFIG_NORTEL_HERMES=mCONFIG_PCI_HERMES=mCONFIG_P54_COMMON=mCONFIG_P54_USB=mCONFIG_P54_PCI=mCONFIG_P54_LEDS=yCONFIG_RT2X00=mCONFIG_RT2400PCI=mCONFIG_RT2500PCI=mCONFIG_RT61PCI=mCONFIG_RT2800PCI_PCI=mCONFIG_RT2800PCI=mCONFIG_RT2500USB=mCONFIG_RT73USB=mCONFIG_RT2800USB=mCONFIG_RT2800_LIB=mCONFIG_RT2X00_LIB_PCI=mCONFIG_RT2X00_LIB_USB=mCONFIG_RT2X00_LIB=mCONFIG_RT2X00_LIB_HT=yCONFIG_RT2X00_LIB_FIRMWARE=yCONFIG_RT2X00_LIB_CRYPTO=yCONFIG_RT2X00_LIB_LEDS=yCONFIG_ZD1211RW=m
CONFIG_WIMAX_I2400M=mCONFIG_WIMAX_I2400M_USB=mCONFIG_WIMAX_I2400M_SDIO=mCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_DM9601=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_HSO=mCONFIG_IEEE802154_DRIVERS=mCONFIG_XEN_NETDEV_FRONTEND=yCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_PPPOL2TP=mCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=mCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=mCONFIG_VMXNET3=m
CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=yCONFIG_XEN_KBDDEV_FRONTEND=y
CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_NEWTON=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_SERIAL=mCONFIG_INPUT_JOYSTICK=yCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_GTCO=mCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=m
CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=y
CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=16CONFIG_SERIAL_8250_RUNTIME_UARTS=8
CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=yCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=0CONFIG_PRINTER=mCONFIG_PPDEV=mCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_VIRTIO_CONSOLE=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_VIA=yCONFIG_HW_RANDOM_VIRTIO=mCONFIG_NVRAM=y
CONFIG_PC8736x_GPIO=mCONFIG_NSC_GPIO=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=4096CONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=mCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=m
CONFIG_I2C_TINY_USB=m
CONFIG_PPS=mCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=mCONFIG_HWMON=yCONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7473=mCONFIG_SENSORS_ADT7475=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_LTC4215=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_PCF8591=mCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_TMP421=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=mCONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ATK0110=mCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=y
CONFIG_SOFT_WATCHDOG=mCONFIG_IT87_WDT=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_BLOCKIO=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=yCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MEDIA_SUPPORT=m
CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=mCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=mCONFIG_VIDEO_MEDIA=m
CONFIG_VIDEO_SAA7146=mCONFIG_VIDEO_SAA7146_VV=mCONFIG_IR_CORE=mCONFIG_VIDEO_IR=mCONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_MT2060=mCONFIG_MEDIA_TUNER_MT2266=mCONFIG_MEDIA_TUNER_MT2131=mCONFIG_MEDIA_TUNER_QT1010=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_MXL5005S=mCONFIG_MEDIA_TUNER_MXL5007T=mCONFIG_MEDIA_TUNER_MC44S803=mCONFIG_VIDEO_V4L2=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=mCONFIG_VIDEOBUF_DVB=mCONFIG_VIDEO_BTCX=mCONFIG_VIDEO_TVEEPROM=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_CAPTURE_DRIVERS=yCONFIG_VIDEO_FIXED_MINOR_RANGES=yCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_IR_I2C=mCONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_CS5345=mCONFIG_VIDEO_CS53L32A=mCONFIG_VIDEO_M52790=mCONFIG_VIDEO_WM8775=mCONFIG_VIDEO_WM8739=mCONFIG_VIDEO_VP27SMPX=mCONFIG_VIDEO_SAA6588=mCONFIG_VIDEO_BT819=mCONFIG_VIDEO_BT856=mCONFIG_VIDEO_BT866=mCONFIG_VIDEO_KS0127=mCONFIG_VIDEO_OV7670=mCONFIG_VIDEO_MT9V011=mCONFIG_VIDEO_SAA7110=mCONFIG_VIDEO_SAA711X=mCONFIG_VIDEO_SAA717X=mCONFIG_VIDEO_TVP5150=mCONFIG_VIDEO_VPX3220=mCONFIG_VIDEO_CX25840=mCONFIG_VIDEO_CX2341X=mCONFIG_VIDEO_SAA7127=mCONFIG_VIDEO_SAA7185=mCONFIG_VIDEO_ADV7170=mCONFIG_VIDEO_ADV7175=mCONFIG_VIDEO_UPD64031A=mCONFIG_VIDEO_UPD64083=mCONFIG_VIDEO_VIVI=mCONFIG_VIDEO_BT848=mCONFIG_VIDEO_BT848_DVB=yCONFIG_VIDEO_SAA5246A=mCONFIG_VIDEO_SAA5249=mCONFIG_VIDEO_ZORAN=mCONFIG_VIDEO_ZORAN_DC30=mCONFIG_VIDEO_ZORAN_ZR36060=mCONFIG_VIDEO_ZORAN_BUZ=mCONFIG_VIDEO_ZORAN_DC10=mCONFIG_VIDEO_ZORAN_LML33=mCONFIG_VIDEO_ZORAN_LML33R10=mCONFIG_VIDEO_ZORAN_AVS6EYES=mCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=mCONFIG_VIDEO_SAA7134_DVB=mCONFIG_VIDEO_HEXIUM_ORION=mCONFIG_VIDEO_HEXIUM_GEMINI=mCONFIG_VIDEO_CX88=mCONFIG_VIDEO_CX88_ALSA=mCONFIG_VIDEO_CX88_BLACKBIRD=mCONFIG_VIDEO_CX88_DVB=mCONFIG_VIDEO_CX88_MPEG=mCONFIG_VIDEO_CX88_VP3054=mCONFIG_VIDEO_CX23885=mCONFIG_VIDEO_AU0828=mCONFIG_VIDEO_IVTV=mCONFIG_VIDEO_FB_IVTV=mCONFIG_VIDEO_CX18=mCONFIG_VIDEO_SAA7164=mCONFIG_VIDEO_CAFE_CCIC=mCONFIG_SOC_CAMERA=mCONFIG_SOC_CAMERA_MT9M001=mCONFIG_SOC_CAMERA_MT9M111=mCONFIG_SOC_CAMERA_MT9T031=mCONFIG_SOC_CAMERA_MT9V022=mCONFIG_SOC_CAMERA_TW9910=mCONFIG_SOC_CAMERA_PLATFORM=mCONFIG_SOC_CAMERA_OV772X=mCONFIG_V4L_USB_DRIVERS=yCONFIG_USB_VIDEO_CLASS=mCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=yCONFIG_USB_GSPCA=mCONFIG_USB_M5602=mCONFIG_USB_STV06XX=mCONFIG_USB_GL860=mCONFIG_USB_GSPCA_MR97310A=mCONFIG_USB_GSPCA_OV519=mCONFIG_USB_GSPCA_OV534=mCONFIG_USB_GSPCA_SN9C20X=mCONFIG_USB_GSPCA_SN9C20X_EVDEV=yCONFIG_USB_GSPCA_SONIXB=mCONFIG_USB_GSPCA_SONIXJ=mCONFIG_USB_GSPCA_SPCA500=mCONFIG_USB_GSPCA_SPCA501=mCONFIG_USB_GSPCA_SPCA505=mCONFIG_USB_GSPCA_SPCA506=mCONFIG_USB_GSPCA_SPCA508=mCONFIG_USB_GSPCA_SPCA561=mCONFIG_USB_GSPCA_SQ905=mCONFIG_USB_GSPCA_SQ905C=mCONFIG_USB_GSPCA_STK014=mCONFIG_USB_GSPCA_SUNPLUS=mCONFIG_USB_GSPCA_T613=mCONFIG_USB_GSPCA_TV8532=mCONFIG_USB_GSPCA_VC032X=mCONFIG_USB_GSPCA_ZC3XX=mCONFIG_VIDEO_PVRUSB2=mCONFIG_VIDEO_PVRUSB2_SYSFS=yCONFIG_VIDEO_PVRUSB2_DVB=yCONFIG_VIDEO_HDPVR=mCONFIG_VIDEO_EM28XX=mCONFIG_VIDEO_EM28XX_ALSA=mCONFIG_VIDEO_EM28XX_DVB=mCONFIG_VIDEO_CX231XX=mCONFIG_VIDEO_CX231XX_ALSA=mCONFIG_VIDEO_CX231XX_DVB=mCONFIG_VIDEO_USBVISION=mCONFIG_USB_ET61X251=mCONFIG_USB_SN9C102=mCONFIG_USB_ZC0301=mCONFIG_USB_PWC_INPUT_EVDEV=yCONFIG_USB_ZR364XX=mCONFIG_USB_STKWEBCAM=mCONFIG_USB_S2255=mCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_CAPTURE_DRIVERS=y
CONFIG_TTPCI_EEPROM=mCONFIG_DVB_AV7110=mCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET_CORE=mCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=mCONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_USB=mCONFIG_DVB_USB_A800=mCONFIG_DVB_USB_DIBUSB_MB=mCONFIG_DVB_USB_DIBUSB_MC=mCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_CXUSB=mCONFIG_DVB_USB_M920X=mCONFIG_DVB_USB_GL861=mCONFIG_DVB_USB_AU6610=mCONFIG_DVB_USB_DIGITV=mCONFIG_DVB_USB_VP7045=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_GP8PSK=mCONFIG_DVB_USB_NOVA_T_USB2=mCONFIG_DVB_USB_TTUSB2=mCONFIG_DVB_USB_DTT200U=mCONFIG_DVB_USB_OPERA1=mCONFIG_DVB_USB_AF9005=mCONFIG_DVB_USB_AF9005_REMOTE=mCONFIG_DVB_USB_DW2102=mCONFIG_DVB_USB_CINERGY_T2=mCONFIG_DVB_USB_ANYSEE=mCONFIG_DVB_USB_DTV5100=mCONFIG_DVB_USB_AF9015=mCONFIG_DVB_USB_CE6230=mCONFIG_DVB_USB_FRIIO=mCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=mCONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_USB_DRV=mCONFIG_SMS_SDIO_DRV=m
CONFIG_DVB_B2C2_FLEXCOP=mCONFIG_DVB_B2C2_FLEXCOP_PCI=mCONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_BT8XX=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_FIREDTV=mCONFIG_DVB_FIREDTV_IEEE1394=yCONFIG_DVB_FIREDTV_INPUT=y
CONFIG_DVB_PT1=m
CONFIG_DVB_STB0899=mCONFIG_DVB_STB6100=mCONFIG_DVB_CX24110=mCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_ZL10036=mCONFIG_DVB_ZL10039=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0288=mCONFIG_DVB_STB6000=mCONFIG_DVB_STV0299=mCONFIG_DVB_STV6110=mCONFIG_DVB_STV0900=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=mCONFIG_DVB_TDA8261=mCONFIG_DVB_VES1X93=mCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TUNER_CX24113=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUA6100=mCONFIG_DVB_CX24116=mCONFIG_DVB_SI21XX=mCONFIG_DVB_DS3000=mCONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=mCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=mCONFIG_DVB_TDA10048=mCONFIG_DVB_AF9013=mCONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=mCONFIG_DVB_NXT200X=mCONFIG_DVB_OR51211=mCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=mCONFIG_DVB_LGDT3305=mCONFIG_DVB_S5H1409=mCONFIG_DVB_AU8522=mCONFIG_DVB_S5H1411=mCONFIG_DVB_DIB8000=mCONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=mCONFIG_DVB_LNBP21=mCONFIG_DVB_ISL6405=mCONFIG_DVB_ISL6421=mCONFIG_DVB_LGS8GL5=mCONFIG_DAB=yCONFIG_USB_DABUSB=m
CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_VIA=mCONFIG_VGA_ARB=yCONFIG_DRM=mCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_TTM=mCONFIG_DRM_RADEON=mCONFIG_VGASTATE=mCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=yCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
CONFIG_FB_VGA16=mCONFIG_FB_UVESA=mCONFIG_FB_VESA=yCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=yCONFIG_FB_NVIDIA_BACKLIGHT=yCONFIG_XEN_FBDEV_FRONTEND=yCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_PLATFORM=mCONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_DISPLAY_SUPPORT=m
CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=yCONFIG_SOUND_OSS_CORE_PRECLAIM=yCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_HRTIMER=mCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=yCONFIG_SND_VMASTER=yCONFIG_SND_DMA_SGBUF=yCONFIG_SND_RAWMIDI_SEQ=mCONFIG_SND_EMU10K1_SEQ=mCONFIG_SND_MPU401_UART=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DRIVERS=yCONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=0CONFIG_SND_PCI=yCONFIG_SND_BT87X=mCONFIG_SND_CA0106=mCONFIG_SND_OXYGEN_LIB=mCONFIG_SND_EMU10K1=mCONFIG_SND_HDA_INTEL=mCONFIG_SND_HDA_HWDEP=yCONFIG_SND_HDA_RECONFIG=yCONFIG_SND_HDA_INPUT_JACK=yCONFIG_SND_HDA_PATCH_LOADER=yCONFIG_SND_HDA_CODEC_REALTEK=yCONFIG_SND_HDA_CODEC_ANALOG=yCONFIG_SND_HDA_CODEC_VIA=yCONFIG_SND_HDA_CODEC_ATIHDMI=yCONFIG_SND_HDA_CODEC_NVHDMI=yCONFIG_SND_HDA_CODEC_INTELHDMI=yCONFIG_SND_HDA_ELD=yCONFIG_SND_HDA_CODEC_CIRRUS=yCONFIG_SND_HDA_CODEC_CONEXANT=yCONFIG_SND_HDA_CODEC_CA0110=yCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=0CONFIG_SND_INTEL8X0=mCONFIG_SND_VIRTUOSO=mCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=mCONFIG_SND_USB_CAIAQ=mCONFIG_SND_USB_CAIAQ_INPUT=yCONFIG_SND_USB_US122L=mCONFIG_SOUND_PRIME=mCONFIG_SOUND_OSS=mCONFIG_SOUND_TRACEINIT=yCONFIG_SOUND_DMAP=yCONFIG_SOUND_VMIDI=mCONFIG_SOUND_MPU401=mCONFIG_SOUND_PAS=mCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=yCONFIG_SOUND_SB=mCONFIG_SOUND_YM3812=mCONFIG_SOUND_UART6850=mCONFIG_SOUND_KAHLUA=mCONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=mCONFIG_HIDRAW=y
CONFIG_USB_HID=mCONFIG_USB_HIDDEV=y
CONFIG_HID_A4TECH=mCONFIG_HID_APPLE=mCONFIG_HID_BELKIN=mCONFIG_HID_CHERRY=mCONFIG_HID_CHICONY=mCONFIG_HID_CYPRESS=mCONFIG_HID_DRAGONRISE=mCONFIG_HID_EZKEY=mCONFIG_HID_KYE=mCONFIG_HID_GYRATION=mCONFIG_HID_TWINHAN=mCONFIG_HID_KENSINGTON=mCONFIG_HID_LOGITECH=mCONFIG_HID_MICROSOFT=mCONFIG_HID_MONTEREY=mCONFIG_HID_NTRIG=mCONFIG_HID_PANTHERLORD=mCONFIG_HID_PETALYNX=mCONFIG_HID_SAMSUNG=mCONFIG_HID_SONY=mCONFIG_HID_SUNPLUS=mCONFIG_HID_GREENASIA=mCONFIG_HID_SMARTJOYPLUS=mCONFIG_HID_TOPSEED=mCONFIG_HID_THRUSTMASTER=mCONFIG_HID_WACOM=mCONFIG_HID_ZEROPLUS=mCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=mCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_SUSPEND=yCONFIG_USB_MON=mCONFIG_USB_WUSB=mCONFIG_USB_WUSB_CBAF=mCONFIG_USB_WUSB_CBAF_DEBUG=y
CONFIG_USB_C67X00_HCD=mCONFIG_USB_XHCI_HCD=mCONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_OHCI_HCD=mCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=mCONFIG_USB_WHCI_HCD=mCONFIG_USB_HWA_HCD=m
CONFIG_USB_PRINTER=mCONFIG_USB_WDM=m
CONFIG_USB_STORAGE=mCONFIG_USB_STORAGE_DATAFAB=mCONFIG_USB_STORAGE_FREECOM=mCONFIG_USB_STORAGE_ISD200=mCONFIG_USB_STORAGE_USBAT=mCONFIG_USB_STORAGE_SDDR09=mCONFIG_USB_STORAGE_SDDR55=mCONFIG_USB_STORAGE_JUMPSHOT=mCONFIG_USB_STORAGE_ALAUDA=mCONFIG_USB_STORAGE_ONETOUCH=mCONFIG_USB_STORAGE_KARMA=mCONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_SERIAL=mCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_CH341=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP210X=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_IUU=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_MOTOROLA=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_OTI6858=mCONFIG_USB_SERIAL_SPCP8X5=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=yCONFIG_USB_SERIAL_SIEMENS_MPI=mCONFIG_USB_SERIAL_SIERRAWIRELESS=mCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_SISUSBVGA=mCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_TEST=mCONFIG_USB_ISIGHTFW=mCONFIG_USB_GADGET=mCONFIG_USB_GADGET_VBUS_DRAW=2CONFIG_USB_GADGET_SELECTED=yCONFIG_USB_GADGET_CI13XXX=yCONFIG_USB_CI13XXX=mCONFIG_USB_GADGET_DUALSPEED=yCONFIG_USB_AUDIO=mCONFIG_USB_GADGETFS=m
CONFIG_UWB=mCONFIG_UWB_HWA=mCONFIG_UWB_WHCI=mCONFIG_UWB_WLP=mCONFIG_UWB_I1480U=mCONFIG_UWB_I1480U_WLP=mCONFIG_MMC=m
CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=mCONFIG_MMC_TEST=m
CONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_PCI=mCONFIG_MMC_RICOH_MMC=mCONFIG_MMC_SDHCI_PLTFM=mCONFIG_MMC_WBSD=mCONFIG_MMC_TIFM_SD=mCONFIG_MMC_CB710=mCONFIG_MMC_VIA_SDMMC=mCONFIG_MEMSTICK=m
CONFIG_MSPRO_BLOCK=m
CONFIG_MEMSTICK_TIFM_MS=mCONFIG_MEMSTICK_JMICRON_38X=mCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
CONFIG_LEDS_PCA9532=mCONFIG_LEDS_CLEVO_MAIL=mCONFIG_LEDS_PCA955X=mCONFIG_LEDS_BD2802=m
CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
CONFIG_RTC_LIB=mCONFIG_RTC_CLASS=m
CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=yCONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1374=mCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=mCONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_CMOS=mCONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_DS1742=m
CONFIG_UIO=mCONFIG_UIO_PDRV=mCONFIG_UIO_PDRV_GENIRQ=mCONFIG_UIO_PCI_GENERIC=m
CONFIG_XEN_BALLOON=yCONFIG_XEN_SCRUB_PAGES=yCONFIG_XEN_DEV_EVTCHN=yCONFIG_XENFS=yCONFIG_XEN_COMPAT_XENFS=yCONFIG_XEN_SYS_HYPERVISOR=yCONFIG_X86_PLATFORM_DEVICES=yCONFIG_ACPI_WMI=mCONFIG_ACPI_TOSHIBA=m
CONFIG_EDD=mCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=mCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=m
CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT3_FS=mCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=mCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_JBD=mCONFIG_JBD_DEBUG=yCONFIG_JBD2=mCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=mCONFIG_REISERFS_FS=mCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=yCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_BTRFS_FS=mCONFIG_BTRFS_FS_POSIX_ACL=yCONFIG_NILFS2_FS=mCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=mCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_CUSE=mCONFIG_GENERIC_ACL=y
CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=mCONFIG_NTFS_RW=y
CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=yCONFIG_SQUASHFS=mCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3CONFIG_UFS_FS=mCONFIG_UFS_FS_WRITE=yCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=yCONFIG_NFS_V4_1=yCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=mCONFIG_CIFS=mCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_EXPERIMENTAL=yCONFIG_NCP_FS=mCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=yCONFIG_NCPFS_SMALLDOS=yCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=yCONFIG_CODA_FS=mCONFIG_AFS_FS=m
CONFIG_PARTITION_ADVANCED=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=mCONFIG_DLM=m
CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=yCONFIG_STRIP_ASM_SYMS=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_DEBUG_KERNEL=yCONFIG_DETECT_HUNG_TASK=yCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_KMEMLEAK=yCONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400CONFIG_DEBUG_KMEMLEAK_TEST=mCONFIG_STACKTRACE=yCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_RCU_TORTURE_TEST=mCONFIG_DEBUG_FORCE_WEAK_PER_CPU=yCONFIG_LKDTM=mCONFIG_LATENCYTOP=yCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_BRANCH_PROFILE_NONE=yCONFIG_POWER_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_KPROBE_EVENT=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FTRACE_MCOUNT_RECORD=yCONFIG_PROVIDE_OHCI1394_DMA_INIT=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=yCONFIG_KGDB_TESTS=yCONFIG_KGDB_TESTS_ON_BOOT=yCONFIG_KGDB_TESTS_BOOT_STRING="V1F100"CONFIG_HAVE_ARCH_KMEMCHECK=yCONFIG_STRICT_DEVMEM=yCONFIG_EARLY_PRINTK=yCONFIG_DEBUG_RODATA=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=yCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_CPA_DEBUG=y
CONFIG_KEYS=yCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_ASYNC_PQ=mCONFIG_ASYNC_RAID6_RECOV=mCONFIG_CRYPTO=y
CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=mCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=mCONFIG_CRYPTO_AUTHENC=mCONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=mCONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_CTR=mCONFIG_CRYPTO_CTS=mCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_LRW=mCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_XTS=mCONFIG_CRYPTO_FPU=m
CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=mCONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_CRC32C_INTEL=mCONFIG_CRYPTO_GHASH=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_RMD128=mCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_RMD256=mCONFIG_CRYPTO_RMD320=mCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_X86_64=mCONFIG_CRYPTO_AES_NI_INTEL=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_SALSA20=mCONFIG_CRYPTO_SALSA20_X86_64=mCONFIG_CRYPTO_SEED=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_ZLIB=yCONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_ANSI_CPRNG=mCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_HAVE_KVM_EVENTFD=yCONFIG_KVM_APIC_ARCHITECTURE=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_AMD=mCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=mCONFIG_BINARY_PRINTF=y
CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_T10DIF=mCONFIG_CRC_ITU_T=mCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
Re: [Bug #14946] All kernels after 2.6.32-git10 show only 1 CPU
Quoted 39 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
Subject : All kernels after 2.6.32-git10 show only 1 CPU
Submitter : Sid Boyce <[email protected]>
Date : 2009-12-23 16:55 (19 days old)
References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4With 2.6.33-rc3-git3 I now see 2 CPU's every on a normal boot, but its locking up solid at this part of the boot process as usual.
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22.
With acpi=noirq (2 CPU's)
================
kvm: Nested Virtualization enabled.
IT8716 Super IO detectedParport_PC00:0a: reported by plug and Play ACPI
Parport 0: PC-Style at0x378, irq 7 [PCSPP, TRISTATE,EPP]
parport: irq 7 in use, resorting to polled operation
HDA Intel 0000:00:0e.1: PCI -> APIC IRQ transform: INT B -> IRQ 11With acpi=ht (1 CPU)
=============
Hangs at:-
Loading drivees, configuring devicesdo_IRQ: 0.65 No irq handler for vector (irq -1)
Quoted 3 lines
With acpi=off (2 CPU's)
========================
Hangs at same point as with acpi=noirq.
Thanks for the update.
Rafael
HDA Intel Audio hang on boot
In reply to Sid BoyceRenaming this bug as the "only 1 CPU" bug has been fixed, but the hang at HDA remains.
I shall plug in a SB Audigy and see if it will boot with that. By disabling the on-board HDA Intel audio in the BIOS, the system boots. tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoi sata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"
Regards
Sid.
Quoted 45 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
Subject : All kernels after 2.6.32-git10 show only 1 CPU
Submitter : Sid Boyce <[email protected]>
Date : 2009-12-23 16:55 (19 days old)
References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4With 2.6.33-rc3-git3 I now see 2 CPU's every on a normal boot, but its locking up solid at this part of the boot process as usual.
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22.
With acpi=noirq (2 CPU's)
================
kvm: Nested Virtualization enabled.
IT8716 Super IO detectedParport_PC00:0a: reported by plug and Play ACPI
Parport 0: PC-Style at0x378, irq 7 [PCSPP, TRISTATE,EPP]
parport: irq 7 in use, resorting to polled operation
HDA Intel 0000:00:0e.1: PCI -> APIC IRQ transform: INT B -> IRQ 11With acpi=ht (1 CPU)
=============
Hangs at:-
Loading drivees, configuring devicesdo_IRQ: 0.65 No irq handler for vector (irq -1)With acpi=off (2 CPU's)
========================
Hangs at same point as with acpi=noirq.Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
With the PCI Audigy card in, the box wouldn't even enter POST, either the Audigy is bad (unknown - from a box that couldn't see the drives) or there is something faulty on the motherboard. I am currently running 2.6.33-rc4-git2 on the box with a Terratec Aureon 5.1 USB MK II sound card. Regards
Sid.
Quoted 86 lines · Sid Boyce
Renaming this bug as the "only 1 CPU" bug has been fixed, but the hang at HDA remains.
I shall plug in a SB Audigy and see if it will boot with that. By disabling the on-board HDA Intel audio in the BIOS, the system boots. tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Regards
Sid.Quoted 45 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
Subject : All kernels after 2.6.32-git10 show only 1 CPU
Submitter : Sid Boyce <[email protected]>
Date : 2009-12-23 16:55 (19 days old)
References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4With 2.6.33-rc3-git3 I now see 2 CPU's every on a normal boot, but its locking up solid at this part of the boot process as usual.
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22.
With acpi=noirq (2 CPU's)
================
kvm: Nested Virtualization enabled.
IT8716 Super IO detectedParport_PC00:0a: reported by plug and Play ACPI
Parport 0: PC-Style at0x378, irq 7 [PCSPP, TRISTATE,EPP]
parport: irq 7 in use, resorting to polled operation
HDA Intel 0000:00:0e.1: PCI -> APIC IRQ transform: INT B -> IRQ 11With acpi=ht (1 CPU)
=============
Hangs at:-
Loading drivees, configuring devicesdo_IRQ: 0.65 No irq handler for vector (irq -1)With acpi=off (2 CPU's)
========================
Hangs at same point as with acpi=noirq.Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
Quoted 7 lines · Sid Boyce
With the PCI Audigy card in, the box wouldn't even enter POST, either the Audigy is bad (unknown - from a box that couldn't see the drives) or there is something faulty on the motherboard. I am currently running 2.6.33-rc4-git2 on the box with a Terratec Aureon 5.1 USB MK II sound card. Regards
Sid.
The Audigy card is definitely bad as the original box now works fine without it.
Something has definitely changed in the HDA Intel code or handling of it that causes that card to cause a solid lock-up on kernels >2.6.32-git1. Regards
Sid.
Quoted 89 lines · Sid Boyce
Quoted 86 lines
Renaming this bug as the "only 1 CPU" bug has been fixed, but the hang at HDA remains.
I shall plug in a SB Audigy and see if it will boot with that. By disabling the on-board HDA Intel audio in the BIOS, the system boots. tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Regards
Sid.Quoted 45 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
Subject : All kernels after 2.6.32-git10 show only 1 CPU
Submitter : Sid Boyce <[email protected]>
Date : 2009-12-23 16:55 (19 days old)
References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4With 2.6.33-rc3-git3 I now see 2 CPU's every on a normal boot, but its locking up solid at this part of the boot process as usual.
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22.
With acpi=noirq (2 CPU's)
================
kvm: Nested Virtualization enabled.
IT8716 Super IO detectedParport_PC00:0a: reported by plug and Play ACPI
Parport 0: PC-Style at0x378, irq 7 [PCSPP, TRISTATE,EPP]
parport: irq 7 in use, resorting to polled operation
HDA Intel 0000:00:0e.1: PCI -> APIC IRQ transform: INT B -> IRQ 11With acpi=ht (1 CPU)
=============
Hangs at:-
Loading drivees, configuring devicesdo_IRQ: 0.65 No irq handler for vector (irq -1)With acpi=off (2 CPU's)
========================
Hangs at same point as with acpi=noirq.Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
In reply to Sid BoyceOn 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.
Regards
Sid.
Quoted 34 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.
I guess we should let Takashi know.
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"
Rafael
Re: HDA Intel Audio hang on boot
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"
What I'd try first is to pass enable_msi=0 option.
The MSI is enabled as default on 2.6.33 kernel, and this might be problematic on non-Intel mobo.
Takashi
Re: HDA Intel Audio hang on boot
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"
Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
Re: HDA Intel Audio hang on boot
Quoted 47 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"
Quoted 7 lines
Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line, still locks up as before.
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 51 lines · Sid Boyce
Quoted 49 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 46 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"What I'd try first is to pass enable_msi=0 option.
Quoted 8 lines
Quoted 5 lines
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line, still locks up as before.
OK, are you sure that the lock-up happens at snd-hda-intel module? How about blacklist it once?
Takashi
Re: HDA Intel Audio hang on boot
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 62 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 59 lines · Sid Boyce
Quoted 47 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 7 lines
Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in /etc/modprobe.d/* file.
And... is this report for 2.6.32 or for 2.6.33? If it's with 2.6.32, enable_msi=1 may help instead.
Takashi
Re: HDA Intel Audio hang on boot
Quoted 62 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 60 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 57 lines · Sid Boyce
Quoted 54 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.
I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.conf
options snd slots=snd-hda-intel,enable_msi=0
# mDsH.vLXC8EvZgR7:MCP55 High Definition Audio
alias snd-card-0 snd-hda-intel
Quoted 4 lines
And... is this report for 2.6.32 or for 2.6.33? If it's with 2.6.32, enable_msi=1 may help instead.
The motherboard giving the problem is the Asus M2N32-SLI deluxe. 00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
No such problem with the Asus CROSSHAIR II FORMULA motherboard which also has the
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
For any kernel >2.6.32-git1 it hangs, i.e 2.6.32-git2 to 2.6.33-rc5. Disabling the sound chip in the BIOS, they all boot. tindog:/etc/modprobe.d # uname -r
2.6.32-git1-smp
tindog:/etc/modprobe.d # l /dev/dsp*
crw-rw-rw- 1 root audio 14, 3 Jan 26 11:46 /dev/dsp crw-rw-rw- 1 root audio 14, 35 Jan 26 11:46 /dev/dsp2
Quoted 2 lines
Takashi
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
Quoted 1 line · Sid Boyce
On 26/01/10 06:58, Takashi Iwai wrote:
...
Quoted 13 lines
Quoted 4 lines
And... is this report for 2.6.32 or for 2.6.33? If it's with 2.6.32, enable_msi=1 may help instead.
The motherboard giving the problem is the Asus M2N32-SLI deluxe. 00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
No such problem with the Asus CROSSHAIR II FORMULA motherboard which also has the
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Quoted 7 lines
For any kernel >2.6.32-git1 it hangs, i.e 2.6.32-git2 to 2.6.33-rc5. Disabling the sound chip in the BIOS, they all boot. tindog:/etc/modprobe.d # uname -r
2.6.32-git1-smp
tindog:/etc/modprobe.d # l/dev/dsp*
crw-rw-rw- 1 root audio 14, 3 Jan 26 11:46/dev/dspcrw-rw-rw- 1 root audio 14, 35 Jan 26 11:46/dev/dsp2
Is your adapter build as a module or is it compiled directly into the kernel?
Rafael
Re: HDA Intel Audio hang on boot
Quoted 24 lines · Rafael J. Wysocki
Quoted 1 line · Sid Boyce
On 26/01/10 06:58, Takashi Iwai wrote:
...
Quoted 13 lines
Quoted 4 lines
And... is this report for 2.6.32 or for 2.6.33? If it's with 2.6.32, enable_msi=1 may help instead.
The motherboard giving the problem is the Asus M2N32-SLI deluxe. 00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
No such problem with the Asus CROSSHAIR II FORMULA motherboard which also has the
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)Quoted 7 lines
For any kernel >2.6.32-git1 it hangs, i.e 2.6.32-git2 to 2.6.33-rc5. Disabling the sound chip in the BIOS, they all boot. tindog:/etc/modprobe.d # uname -r
2.6.32-git1-smp
tindog:/etc/modprobe.d # l/dev/dsp*
crw-rw-rw- 1 root audio 14, 3 Jan 26 11:46/dev/dspcrw-rw-rw- 1 root audio 14, 35 Jan 26 11:46/dev/dsp2
Quoted 4 lines
Is your adapter build as a module or is it compiled directly into the kernel?
Rafael
As a module in 2.6.33-git1 and always for all kernels. # lsmod|grep snd
snd_pcm_oss 40102 0 snd_mixer_oss 14822 1 snd_pcm_oss snd_seq 52843 0 snd_hda_codec_analog 73538 1 snd_hda_intel 23660 0 snd_hda_codec 75402 2 snd_hda_codec_analog,snd_hda_intel snd_usb_audio 85288 0 snd_usb_lib 16705 1 snd_usb_audio snd_rawmidi 21568 1 snd_usb_lib snd_pcm 81892 4 snd_pcm_oss,snd_hda_intel,snd_hda_codec,snd_usb_audio snd_seq_device 6514 2 snd_seq,snd_rawmidi snd_hwdep 6346 2 snd_hda_codec,snd_usb_audio snd_timer 20760 2 snd_seq,snd_pcm snd 66395 13 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_pcm,snd_seq_device,snd_hwdep,snd_timer snd_page_alloc 7873 2 snd_hda_intel,snd_pcm soundcore 7147 1 snd usbcore 146206 6
rtl8187,snd_usb_audio,snd_usb_lib,usbhid,ohci_hcd,ehci_hcd Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
In reply to Sid BoyceAt Tue, 26 Jan 2010 12:02:44 +0000,
Quoted 69 lines · Sid Boyce
Quoted 67 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 62 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 59 lines · Sid Boyce
Quoted 47 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 7 lines
Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
Quoted 8 lines
Quoted 3 lines
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.confoptions snd slots=snd-hda-intel,enable_msi=0
This is the option for module snd, not snd-hda-intel.
Takashi
Re: HDA Intel Audio hang on boot
Quoted 78 lines · Takashi Iwai
At Tue, 26 Jan 2010 12:02:44 +0000,
Quoted 76 lines · Sid Boyce
Quoted 62 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 60 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 57 lines · Sid Boyce
Quoted 54 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.conf
Quoted 7 lines
Quoted 1 line
options snd slots=snd-hda-intel,enable_msi=0
This is the option for module snd, not snd-hda-intel.
Takashi
options snd,enable_msi=0 slots=snd-hda-intel
# 9LTX.vLXC8EvZgR7:MCP55 High Definition Audio
alias snd-card-0 snd-hda-intel
enable_msi=0 or 1, it still hangs.
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
At Tue, 26 Jan 2010 13:44:23 +0000,
Quoted 80 lines · Sid Boyce
Quoted 78 lines · Takashi Iwai
At Tue, 26 Jan 2010 12:02:44 +0000,
Quoted 76 lines · Sid Boyce
Quoted 62 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 60 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 57 lines · Sid Boyce
Quoted 54 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.conf
Quoted 8 lines
Quoted 7 lines
Quoted 1 line
options snd slots=snd-hda-intel,enable_msi=0
This is the option for module snd, not snd-hda-intel.
Takashi
options snd,enable_msi=0 slots=snd-hda-intel
It's a line for module "snd,enable_msi=0", which is likely invalid :)
Takashi
Re: HDA Intel Audio hang on boot
In reply to Sid BoyceQuoted 79 lines · Sid Boyce
Quoted 78 lines · Takashi Iwai
At Tue, 26 Jan 2010 12:02:44 +0000,
Quoted 76 lines · Sid Boyce
Quoted 62 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 60 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 57 lines · Sid Boyce
Quoted 54 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.conf
Quoted 8 lines
Quoted 7 lines
Quoted 1 line
options snd slots=snd-hda-intel,enable_msi=0
This is the option for module snd, not snd-hda-intel.
Takashi
options snd,enable_msi=0 slots=snd-hda-intel
options snd enable_msi=0 slots=snd-hda-intel
(ie. the comma shouldn't be present in there).
Quoted 2 lines
# 9LTX.vLXC8EvZgR7:MCP55 High Definition Audio
alias snd-card-0 snd-hda-intel
Rafael
Re: HDA Intel Audio hang on boot
At Tue, 26 Jan 2010 19:22:35 +0100,
Quoted 86 lines · Rafael J. Wysocki
Quoted 84 lines · Sid Boyce
Quoted 83 lines · Takashi Iwai
At Tue, 26 Jan 2010 12:02:44 +0000,
Quoted 69 lines · Sid Boyce
Quoted 67 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 62 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 59 lines · Sid Boyce
Quoted 47 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 7 lines
Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
Quoted 8 lines
Quoted 3 lines
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.confoptions snd slots=snd-hda-intel,enable_msi=0
This is the option for module snd, not snd-hda-intel.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Takashi
options snd,enable_msi=0 slots=snd-hda-intel
options snd enable_msi=0 slots=snd-hda-intel
(ie. the comma shouldn't be present in there).
Heh, not quite right :)
You need just a new line containing:
options snd-hda-intel enable_msi=0
Takashi
Re: HDA Intel Audio hang on boot
Quoted 96 lines · Takashi Iwai
At Tue, 26 Jan 2010 19:22:35 +0100,
Quoted 86 lines · Rafael J. Wysocki
Quoted 84 lines · Sid Boyce
Quoted 83 lines · Takashi Iwai
At Tue, 26 Jan 2010 12:02:44 +0000,
Quoted 69 lines · Sid Boyce
Quoted 67 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 62 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 59 lines · Sid Boyce
Quoted 47 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoi sata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 7 lines
Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
Quoted 8 lines
Quoted 3 lines
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.confoptions snd slots=snd-hda-intel,enable_msi=0
This is the option for module snd, not snd-hda-intel.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Takashi
options snd,enable_msi=0 slots=snd-hda-intel
options snd enable_msi=0 slots=snd-hda-intel
(ie. the comma shouldn't be present in there).
Quoted 8 lines
Heh, not quite right :)
You need just a new line containing:options snd-hda-intel enable_msi=0
Takashi
Apologies, with the following it boots successfully. options slots=snd-hda-intel
# 9LTX.vLXC8EvZgR7:MCP55 High Definition Audio alias snd-card-0 snd-hda-intel
options snd-hda-intel enable_msi=0
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
In reply to Rafael J. WysockiI forgot to mention 2.6.33-rc5 now boots successfully. Regards
Sid.
Quoted 98 lines · Rafael J. Wysocki
Quoted 79 lines · Sid Boyce
Quoted 78 lines · Takashi Iwai
At Tue, 26 Jan 2010 12:02:44 +0000,
Quoted 76 lines · Sid Boyce
Quoted 62 lines · Takashi Iwai
At Tue, 26 Jan 2010 07:40:03 +0100,
Quoted 60 lines · I wrote:
At Tue, 26 Jan 2010 00:59:15 +0000,
Quoted 57 lines · Sid Boyce
Quoted 54 lines · Takashi Iwai
At Mon, 25 Jan 2010 22:54:23 +0100,
Quoted 45 lines · I wrote:
At Mon, 25 Jan 2010 22:39:02 +0100,
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines · Sid Boyce
On 15/01/10 01:24, Sid Boyce wrote:
This is the only outstanding bug. No problems up 2.6.32-git1, but I get a solid lock-up on 2.6.32-git2 through 2.6.33-rc5 if the on-board audio is not disabled in the BIOS.I guess we should let Takashi know.
Thanks.
Quoted 22 lines
Quoted 22 lines
Quoted 22 lines
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device' alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card' sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoisata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1 HDA Intel: module =snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"HDA Intel: /devices/pci0000:00/0000:00:0e.1Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
HDA Intel: module =
snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module =snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"Quoted 1 line
What I'd try first is to pass enable_msi=0 option.
Just to be sure -- it's an option for snd-hda-intel module.
Takashi
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
I passed "modprobe snd-hda-intel enable_msi=0" on the kernel command line,
Oh, I overlooked this text. Of course, this can't work :)
"modprobe..." isn't for the kernel command line but for modprobe configs, usually specified in
/etc/modprobe.d/*file.I had already tried that... it locks up at the same point also with "enable_msi=1".
tindog:/etc/modprobe.d # less 50-sound.confQuoted 8 lines
Quoted 7 lines
Quoted 1 line
options snd slots=snd-hda-intel,enable_msi=0
This is the option for module snd, not snd-hda-intel.
Takashi
options snd,enable_msi=0 slots=snd-hda-intel
options snd enable_msi=0 slots=snd-hda-intel
(ie. the comma shouldn't be present in there).
Quoted 2 lines
# 9LTX.vLXC8EvZgR7:MCP55 High Definition Audio
alias snd-card-0 snd-hda-intelRafael
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
Quoted 1 line · Sid Boyce
I forgot to mention 2.6.33-rc5 now boots successfully.
Does that mean the problem is fixed in 2.6.33-rc5 or you still need the enable_msi=0 workaround?
Rafael
Re: HDA Intel Audio hang on boot
Quoted 8 lines · Rafael J. Wysocki
Quoted 1 line · Sid Boyce
I forgot to mention 2.6.33-rc5 now boots successfully.
Does that mean the problem is fixed in 2.6.33-rc5 or you still need the enable_msi=0 workaround?
Rafael
It boots only with the enable_msi=0 workaround.
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Re: HDA Intel Audio hang on boot
At Wed, 27 Jan 2010 02:40:05 +0000,
Quoted 11 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
Quoted 1 line · Sid Boyce
I forgot to mention 2.6.33-rc5 now boots successfully.
Does that mean the problem is fixed in 2.6.33-rc5 or you still need the enable_msi=0 workaround?
Rafael
It boots only with the enable_msi=0 workaround.
OK, then could you run alsa-info.sh (with --no-upload option), and attach the generated file? I'll add your device to the blacklist for disabling MSI in hda_intel.c.
thanks,
Takashi
Re: HDA Intel Audio hang on boot
Quoted 14 lines · Takashi Iwai
At Wed, 27 Jan 2010 02:40:05 +0000,
Quoted 11 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
Quoted 1 line · Sid Boyce
I forgot to mention 2.6.33-rc5 now boots successfully.
Does that mean the problem is fixed in 2.6.33-rc5 or you still need the enable_msi=0 workaround?
Rafael
It boots only with the enable_msi=0 workaround.
Quoted 10 lines
OK, then could you run
alsa-info.sh(with --no-upload option), and attach the generated file? I'll add your device to the blacklist for disabling MSI inhda_intel.c.thanks,
Takashi
Thanks.
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.58
!!################################
!!Script ran on: Wed Jan 27 17:10:57 UTC 2010
!!Linux Distribution
!!------------------
Welcome to openSUSE 11.3 "Teal" Milestone 0 - Kernel \r (\l). openSUSE 11.3 Milestone 0 (x86_64) LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
!!DMI Information
!!---------------
Manufacturer: System manufacturer Product Name: System Product Name
!!Kernel Information
!!------------------
Kernel release: 2.6.33-rc5-git2-smp Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.21 Library version: 1.0.22 Utilities version: 1.0.22
!!Loaded ALSA modules
!!-------------------
snd_hda_intelsnd_emu10k1snd_usb_audio
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/local/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe020000 irq 30
1 [EMU0404 ]: Audigy2 - E-mu 0404b PCI [MAEM8852]
E-mu 0404b PCI [MAEM8852] (rev.0, serial:0x40021102) at 0xec00, irq 16
2 [USB ]: USB-Audio - E-MU 0404 | USB
E-MU Systems, Inc. E-MU 0404 | USB at usb-0000:00:04.1-1.3, high speed!!PCI Soundcards installed in the system
!!--------------------------------------
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1) 01:08.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's !!--------------------------------------------------------
00:07.0 0403: 10de:0774 (rev a1)
Subsystem: 1043:829c -- 01:08.0 0401: 1102:0008 Subsystem: 1102:4002
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N single_cmd : N
!!Module: snd_emu10k1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_ir : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N extin : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 extout : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 max_buffer_size : 128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128 max_synth_voices : 64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64 seq_ports : 4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4 subsystem : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
!!Module: snd_usb_audio
async_unlink : Y device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 nrpacks : 8 pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Analog Devices AD1988B
Address: 0
Function Id: 0x1
Vendor Id: 0x11d4198b
Subsystem Id: 0x1043829c
Revision Id: 0x100400
No Modem Function Group found
Default PCM:
rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="AD198x Digital", type="SPDIF", device=1
Converter: stream=5, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 3 samples
Connection: 1
0x1dNode 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x27 0x27]
Converter: stream=0, channel=0
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
Control: name="Front Playback Volume", index=0, device=0
Device: name="AD198x Analog", type="Audio", device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x26 0x26]
Converter: stream=5, channel=0
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
Control: name="Center Playback Volume", index=0, device=0
Control: name="LFE Playback Volume", index=0, device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x26 0x26]
Converter: stream=5, channel=0
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out
Control: name="Surround Playback Volume", index=0, device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x26 0x26]
Converter: stream=5, channel=0
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x130391: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Unsolicited: tag=00, enabled=0
Delay: 3 samples
Connection: 1
0x1cNode 0x08 [Audio Input] wcaps 0x100501: Stereo
Device: name="AD198x Analog", type="Audio", device=0
Converter: stream=1, channel=0
SDI-Select: 0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 1
0x0c
Node 0x09 [Audio Input] wcaps 0x100501: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 1
0x0d
Node 0x0a [Audio Output] wcaps 0x405: Stereo Amp-Out
Control: name="Side Playback Volume", index=0, device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x26 0x26]
Converter: stream=5, channel=0
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x0b [Audio Selector] wcaps 0x300301: Stereo Digital
Connection: 3
0x08* 0x09 0x0f
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Capture Volume", index=0, device=0
Control: name="Capture Switch", index=0, device=0 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0x36 0x36]
Connection: 10
0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Capture Volume", index=1, device=0
Control: name="Capture Switch", index=1, device=0 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0xa7 0xa7]
Connection: 10
0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Capture Volume", index=2, device=0
Control: name="Capture Switch", index=2, device=0 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0xa7 0xa7]
Connection: 10
0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0f [Audio Input] wcaps 0x100501: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 1
0x0e
Node 0x10 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
Control: name="Beep Playback Switch", index=0, device=0 Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x00]
Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000373f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02214030: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x22Node 0x12 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000373f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x29Node 0x13 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x00]
Pincap 0x00000010: OUT
Pin Default 0x511711f0: [N/A] Speaker at Int Rear
Conn = Analog, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x2d
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000373f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a1902e: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0xe
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x2bNode 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01813021: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x2, Sequence = 0x1
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x2cNode 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00003737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x2aNode 0x17 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01a19020: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x26Node 0x18 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x99331122: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Black
DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x19 [Power Widget] wcaps 0x500500: Mono
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x20 0x21
Node 0x1a [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x91f711f0: [Fixed] Other at Int Rear
Conn = Analog, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1b [Pin Complex] wcaps 0x40030d: Stereo Digital Amp-Out
Control: name="IEC958 Playback Volume", index=0, device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=1 Amp-Out vals: [0x26 0x26]
Pincap 0x00000010: OUT
Pin Default 0x0145f1f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Other
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x1c [Pin Complex] wcaps 0x40020b: Stereo Digital Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x97 0x97]
Pincap 0x00000020: IN
Pin Default 0x41c5f1f0: [N/A] SPDIF In at Ext Rear
Conn = Optical, Color = Other
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Audio Mixer] wcaps 0x200303: Stereo Digital Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x01 0x0b
Node 0x1e [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x36 0x21
Node 0x1f [Volume Knob Widget] wcaps 0x600080: Mono
Volume-Knob: delta=1, steps=63, direct=0, val=0
Unsolicited: tag=00, enabled=0
Connection: 0
Node 0x20 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Mic Playback Volume", index=0, device=0
Control: name="Mic Playback Switch", index=0, device=0
Control: name="Front Mic Playback Volume", index=0, device=0
Control: name="Front Mic Playback Switch", index=0, device=0
Control: name="Line Playback Volume", index=0, device=0
Control: name="Line Playback Switch", index=0, device=0
Control: name="Front Line Playback Volume", index=0, device=0
Control: name="Front Line Playback Switch", index=0, device=0
Control: name="CD Playback Volume", index=0, device=0
Control: name="CD Playback Switch", index=0, device=0
Control: name="Aux Playback Volume", index=0, device=0
Control: name="Aux Playback Switch", index=0, device=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x1f 0x1f] [0x0b 0x0b] [0x1f 0x1f] [0x80 0x80] [0x0c 0x0c] [0x80 0x80] [0x1f 0x1f] [0x80 0x80]
Connection: 8
0x39 0x33 0x38 0x3d 0x34 0x3b 0x18 0x1a
Node 0x21 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Analog Mix Playback Volume", index=0, device=0
Control: name="Analog Mix Playback Switch", index=0, device=0 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f]
Connection: 1
0x20
Node 0x22 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Control: name="Headphone Playback Switch", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x37 0x21
Node 0x23 [Vendor Defined Widget] wcaps 0xf00100: Mono
Connection: 18
0x11* 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x24 0x25 0x38 0x39 0x3a 0x3b 0x3c 0x3d 0x20 0x21Node 0x24 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x27
Node 0x25 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x28
Node 0x26 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x32 0x21
Node 0x27 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Control: name="Center Playback Switch", index=0, device=0
Control: name="LFE Playback Switch", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x05 0x21
Node 0x28 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Control: name="Side Playback Switch", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x0a 0x21
Node 0x29 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Control: name="Front Playback Switch", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x04 0x21
Node 0x2a [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Control: name="Surround Playback Switch", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x06 0x21
Node 0x2b [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x30 0x21
Node 0x2c [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x31 0x21
Node 0x2d [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x1e
Node 0x2e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x2f [Vendor Defined Widget] wcaps 0xf00100: Mono
Connection: 6
0x11* 0x12 0x14 0x15 0x16 0x17
Node 0x30 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x03* 0x04 0x06
Node 0x31 [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x04* 0x0a
Node 0x32 [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x05* 0x04
Node 0x33 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x3a* 0x25 0x24
Node 0x34 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x3c* 0x25 0x24
Node 0x35 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x36 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x03 0x04* 0x06
Node 0x37 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x03 0x04* 0x06Node 0x38 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 1
0x11
Node 0x39 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Front Mic Boost", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x01 0x01]
Connection: 1
0x14
Node 0x3a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 1
0x15
Node 0x3b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 1
0x16
Node 0x3c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mic Boost", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x01 0x01]
Connection: 1
0x17
Node 0x3d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 1
0x12
Codec: Nvidia MCP78 HDMI
Address: 3
Function Id: 0x1
Vendor Id: 0x10de0002
Subsystem Id: 0x10de0101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Device: name="NVIDIA HDMI", type="HDMI", device=3
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCMNode 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x18560110: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCMNode 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560121: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCMNode 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560122: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x08
Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCMNode 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560123: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x3
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0a
Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCMNode 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560124: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x4
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 24 Jan 27 10:34 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 17 Jan 27 10:34 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 7 Jan 27 10:34 /dev/snd/controlC2 crw-rw----+ 1 root audio 116, 23 Jan 27 10:34 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 22 Jan 27 10:34 /dev/snd/hwC0D3 crw-rw----+ 1 root audio 116, 8 Jan 27 10:34 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 26 Jan 27 10:35 /dev/snd/hwC1D2 crw-rw----+ 1 root audio 116, 10 Jan 27 10:34 /dev/snd/midiC1D0 crw-rw----+ 1 root audio 116, 9 Jan 27 10:34 /dev/snd/midiC1D1 crw-rw----+ 1 root audio 116, 27 Jan 27 10:35 /dev/snd/midiC1D2 crw-rw----+ 1 root audio 116, 28 Jan 27 10:35 /dev/snd/midiC1D3 crw-rw----+ 1 root audio 116, 3 Jan 27 10:34 /dev/snd/midiC2D0 crw-rw----+ 1 root audio 116, 21 Jan 27 11:06 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 20 Jan 27 11:06 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 19 Jan 27 10:36 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 18 Jan 27 10:36 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 16 Jan 27 10:36 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 15 Jan 27 10:36 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 14 Jan 27 10:34 /dev/snd/pcmC1D1c crw-rw----+ 1 root audio 116, 13 Jan 27 10:34 /dev/snd/pcmC1D2c crw-rw----+ 1 root audio 116, 12 Jan 27 10:34 /dev/snd/pcmC1D2p crw-rw----+ 1 root audio 116, 11 Jan 27 10:34 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116, 6 Jan 27 11:06 /dev/snd/pcmC2D0c crw-rw----+ 1 root audio 116, 5 Jan 27 11:06 /dev/snd/pcmC2D0p crw-rw----+ 1 root audio 116, 4 Jan 27 10:34 /dev/snd/pcmC2D1p
crw-rw----+ 1 root audio 116, 25 Jan 27 10:35 /dev/snd/seq crw-rw----+ 1 root audio 116, 2 Jan 27 10:34 /dev/snd/timer
/dev/snd/by-id:
total 0
drwxr-xr-x 2 root root 60 Jan 27 10:34 .
drwxr-xr-x 4 root root 620 Jan 27 10:35 ..
lrwxrwxrwx 1 root root 12 Jan 27 10:34 usb-E-MU_Systems__Inc._E-MU_0404___USB_E-MU-63-3F04-07D70A11-07BA0-STATION_2-00 -> ../controlC2
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 100 Jan 27 10:34 .
drwxr-xr-x 4 root root 620 Jan 27 10:35 ..
lrwxrwxrwx 1 root root 12 Jan 27 10:34 pci-0000:00:04.1-usb-0:1.3:1.0 -> ../controlC2 lrwxrwxrwx 1 root root 12 Jan 27 10:34 pci-0000:00:07.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Jan 27 10:34 pci-0000:01:08.0 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
defaults.pcm.rate_converter "samplerate"
!!System wide config file (/etc/asound.conf)
defaults.pcm.rate_converter "samplerate"
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: EMU0404 [E-mu 0404b PCI [MAEM8852]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 1: EMU0404 [E-mu 0404b PCI [MAEM8852]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: EMU0404 [E-mu 0404b PCI [MAEM8852]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: USB [E-MU 0404 | USB], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: USB [E-MU 0404 | USB], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
Subdevices: 2/3
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
card 1: EMU0404 [E-mu 0404b PCI [MAEM8852]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: EMU0404 [E-mu 0404b PCI [MAEM8852]], device 1: emu10k1 mic [Mic Capture]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: EMU0404 [E-mu 0404b PCI [MAEM8852]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: USB [E-MU 0404 | USB], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [NVidia]
Card hw:0 'NVidia'/'HDA NVidia at 0xfe020000 irq 30'
Mixer name : 'Nvidia MCP78 HDMI'
Components : 'HDA:11d4198b,1043829c,00100400 HDA:10de0002,10de0101,00100000'
Controls : 52
Simple ctrls : 28
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 39
Mono: Playback 38 [97%] [-1.50dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 250 [98%] [-1.00dB]
Front Right: Playback 250 [98%] [-1.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 39 [100%] [0.00dB] [on]
Front Right: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Front Line',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%]
Front Right: 1 [33%]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 39 [100%] [0.00dB] [on]
Front Right: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 39
Mono: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 39
Mono: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 39 [100%] [0.00dB] [on]
Front Right: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 11 [35%] [-18.00dB] [on]
Front Right: Playback 11 [35%] [-18.00dB] [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 12 [39%] [-16.50dB] [on]
Front Right: Playback 12 [39%] [-16.50dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%]
Front Right: 1 [33%]
Simple mixer control 'IEC958',0
Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 39 [100%] [0.00dB] [on]
Front Right: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'PCM' 'ADC1' 'ADC2' 'ADC3'
Item0: 'PCM'
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 15 [100%] [0.00dB] [on]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 54
Front Left: Capture 54 [100%] [22.50dB] [on]
Front Right: Capture 54 [100%] [22.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 54
Front Left: Capture 39 [72%] [0.00dB] [off]
Front Right: Capture 39 [72%] [0.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 54
Front Left: Capture 39 [72%] [0.00dB] [off]
Front Right: Capture 39 [72%] [0.00dB] [off]
Simple mixer control 'Analog Mix',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'Front Line' 'CD' 'Aux' 'Mix'
Item0: 'Front Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'Front Line' 'CD' 'Aux' 'Mix'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'Front Line' 'CD' 'Aux' 'Mix'
Item0: 'Mic'
!!-------Mixer controls for card 1 [EMU0404]
Card hw:1 'EMU0404'/'E-mu 0404b PCI [MAEM8852] (rev.0, serial:0x40021102) at 0xec00, irq 16'
Mixer name : 'SB Audigy'
Components : ''
Controls : 239
Simple ctrls : 80
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined penum
Playback channels: Mono
Limits: Playback 0 - 100
Mono: Playback 99 [99%] [0.40dB]
Simple mixer control 'Tone',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [off]
Front Right: Playback [off]
Simple mixer control 'Bass',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 40
Front Left: 20 [50%]
Front Right: 20 [50%]
Simple mixer control 'Treble',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 40
Front Left: 20 [50%]
Front Right: 20 [50%]
Simple mixer control 'PCM',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 100 [100%] [0.00dB] Capture 100 [100%] [0.00dB]
Front Right: Playback 100 [100%] [0.00dB] Capture 100 [100%] [0.00dB]
Simple mixer control 'PCM Center',0
Capabilities: pvolume pvolume-joined penum
Playback channels: Mono
Limits: Playback 0 - 100
Mono: Playback 100 [100%] [0.00dB]
Simple mixer control 'PCM Front',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 100
Mono:
Front Left: Playback 100 [100%] [0.00dB]
Front Right: Playback 100 [100%] [0.00dB]
Simple mixer control 'PCM LFE',0
Capabilities: pvolume pvolume-joined penum
Playback channels: Mono
Limits: Playback 0 - 100
Mono: Playback 100 [100%] [0.00dB]
Simple mixer control 'PCM Side',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 100
Mono:
Front Left: Playback 100 [100%] [0.00dB]
Front Right: Playback 100 [100%] [0.00dB]
Simple mixer control 'PCM Surround',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 100
Mono:
Front Left: Playback 100 [100%] [0.00dB]
Front Right: Playback 100 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 100
Mono:
Front Left: Playback 100 [100%] [0.00dB]
Front Right: Playback 100 [100%] [0.00dB]
Simple mixer control 'Surround',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 100
Mono:
Front Left: Playback 100 [100%] [0.00dB]
Front Right: Playback 100 [100%] [0.00dB]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined penum
Playback channels: Mono
Limits: Playback 0 - 100
Mono: Playback 100 [100%] [0.00dB]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined penum
Playback channels: Mono
Limits: Playback 0 - 100
Mono: Playback 100 [100%] [0.00dB]
Simple mixer control 'Side',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 100
Mono:
Front Left: Playback 100 [100%] [0.00dB]
Front Right: Playback 100 [100%] [0.00dB]
Simple mixer control 'Synth',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 80 [80%] [-8.00dB] Capture 100 [100%] [0.00dB]
Front Right: Playback 80 [80%] [-8.00dB] Capture 100 [100%] [0.00dB]
Simple mixer control 'DSP 0',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: '0202 ADC Left'
Simple mixer control 'DSP 1',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: '0202 ADC Right'
Simple mixer control 'DSP 10',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 11',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 12',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 13',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 14',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 15',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 2',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 3',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 4',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 5',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 6',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 7',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 8',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP 9',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP A',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP B',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP C',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP D',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP E',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'DSP F',0
Capabilities: cenum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Silence'
Simple mixer control 'Line',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 100 [100%] [0.00dB] Capture 100 [100%] [0.00dB]
Front Right: Playback 97 [97%] [-1.20dB] Capture 100 [100%] [0.00dB]
Simple mixer control 'CD',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 31 [31%] [-27.60dB] Capture 30 [30%] [-28.00dB]
Front Right: Playback 31 [31%] [-27.60dB] Capture 30 [30%] [-28.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 94 [94%] [-2.40dB] Capture 99 [99%] [0.40dB]
Front Right: Playback 94 [94%] [-2.40dB] Capture 100 [100%] [0.00dB]
Simple mixer control 'IEC958 Optical',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control 'IEC958 Optical Raw',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [off]
Front Right: Playback [off]
Simple mixer control 'Aux',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control '0202 DAC Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Dock ADC1 Left'
Simple mixer control '0202 DAC Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'Dock ADC1 Right'
Simple mixer control '1010 ADAT 0',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 0'
Simple mixer control '1010 ADAT 1',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 1'
Simple mixer control '1010 ADAT 2',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 2'
Simple mixer control '1010 ADAT 3',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 3'
Simple mixer control '1010 ADAT 4',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 4'
Simple mixer control '1010 ADAT 5',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 5'
Simple mixer control '1010 ADAT 6',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 6'
Simple mixer control '1010 ADAT 7',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 7'
Simple mixer control '1010 SPDIF Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 0'
Simple mixer control '1010 SPDIF Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 1'
Simple mixer control 'ADC1 14dB PAD 0202',0
Capabilities: cswitch cswitch-joined penum
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'ADC1 14dB PAD Audio Dock',0
Capabilities: cswitch cswitch-joined penum
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'ADC2 14dB PAD Audio Dock',0
Capabilities: cswitch cswitch-joined penum
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'ADC3 14dB PAD Audio Dock',0
Capabilities: cswitch cswitch-joined penum
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Analog Mix',0
Capabilities: pvolume cvolume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 100 Capture 0 - 100
Front Left: Playback 99 [99%] [0.40dB] Capture 96 [96%] [-1.60dB]
Front Right: Playback 99 [99%] [0.40dB] Capture 96 [96%] [-1.60dB]
Simple mixer control 'Clock Internal Rate',0
Capabilities: enum
Items: '44100' '48000' 'SPDIF' 'ADAT'
Item0: '48000'
Simple mixer control 'DAC1 0202 14dB PAD',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'DAC1 Audio Dock 14dB PAD',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'DAC2 Audio Dock 14dB PAD',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'DAC3 Audio Dock 14dB PAD',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'DAC4 Audio Dock 14dB PAD',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Dock DAC1 Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 0'
Simple mixer control 'Dock DAC1 Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 1'
Simple mixer control 'Dock DAC2 Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 2'
Simple mixer control 'Dock DAC2 Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 3'
Simple mixer control 'Dock DAC3 Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 4'
Simple mixer control 'Dock DAC3 Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 5'
Simple mixer control 'Dock DAC4 Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 6'
Simple mixer control 'Dock DAC4 Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 7'
Simple mixer control 'Dock Phones Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 0'
Simple mixer control 'Dock Phones Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 1'
Simple mixer control 'Dock SPDIF Left',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 0'
Simple mixer control 'Dock SPDIF Right',0
Capabilities: penum
Items: 'Silence' 'Dock Mic A' 'Dock Mic B' 'Dock ADC1 Left' 'Dock ADC1 Right' 'Dock ADC2 Left' 'Dock ADC2 Right' 'Dock ADC3 Left' 'Dock ADC3 Right' '0202 ADC Left' '0202 ADC Right' '0202 SPDIF Left' '0202 SPDIF Right' 'ADAT 0' 'ADAT 1' 'ADAT 2' 'ADAT 3' 'ADAT 4' 'ADAT 5' 'ADAT 6' 'ADAT 7' 'DSP 0' 'DSP 1' 'DSP 2' 'DSP 3' 'DSP 4' 'DSP 5' 'DSP 6' 'DSP 7' 'DSP 8' 'DSP 9' 'DSP 10' 'DSP 11' 'DSP 12' 'DSP 13' 'DSP 14' 'DSP 15' 'DSP 16' 'DSP 17' 'DSP 18' 'DSP 19' 'DSP 20' 'DSP 21' 'DSP 22' 'DSP 23' 'DSP 24' 'DSP 25' 'DSP 26' 'DSP 27' 'DSP 28' 'DSP 29' 'DSP 30' 'DSP 31'
Item0: 'DSP 1'
Simple mixer control 'EMU',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 100
Front Left: Capture 92 [92%] [-3.20dB]
Front Right: Capture 92 [92%] [-3.20dB]
!!-------Mixer controls for card 2 [USB]
Card hw:2 'USB'/'E-MU Systems, Inc. E-MU 0404 | USB at usb-0000:00:04.1-1.3, high speed'
Mixer name : 'USB Mixer'
Components : 'USB041e:3f04'
Controls : 6
Simple ctrls : 5
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback 0 - 200
Mono:
Front Left: Playback 200 [100%] [0.00dB] [on]
Front Right: Playback 200 [100%] [0.00dB] [on]
Rear Left: Playback 0 [0%] [0.00dB] [on]
Rear Right: Playback 0 [0%] [0.00dB] [on]
Simple mixer control 'Extension Unit',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Extension Unit',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Extension Unit',2
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Extension Unit',3
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!-------------
--startcollapse--
state.NVidia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 39'
comment.dbmin -5850
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 39
value.1 39
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 39'
comment.dbmin -5850
comment.dbmax 0
iface MIXER
name 'Surround Playback Volume'
value.0 39
value.1 39
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 39'
comment.dbmin -5850
comment.dbmax 0
iface MIXER
name 'Center Playback Volume'
value 39
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 39'
comment.dbmin -5850
comment.dbmax 0
iface MIXER
name 'LFE Playback Volume'
value 39
}
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Center Playback Switch'
value true
}
control.8 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value true
}
control.9 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 39'
comment.dbmin -5850
comment.dbmax 0
iface MIXER
name 'Side Playback Volume'
value.0 39
value.1 39
}
control.10 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Side Playback Switch'
value.0 true
value.1 true
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Mic Playback Volume'
value.0 12
value.1 12
}
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
}
control.14 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 3'
comment.dbmin 0
comment.dbmax 3000
iface MIXER
name 'Mic Boost'
value.0 1
value.1 1
}
control.15 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Front Mic Playback Volume'
value.0 31
value.1 31
}
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Mic Playback Switch'
value.0 true
value.1 true
}
control.17 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 3'
comment.dbmin 0
comment.dbmax 3000
iface MIXER
name 'Front Mic Boost'
value.0 1
value.1 1
}
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Line Playback Volume'
value.0 11
value.1 11
}
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Line Playback Switch'
value.0 true
value.1 true
}
control.20 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Front Line Playback Volume'
value.0 31
value.1 31
}
control.21 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Line Playback Switch'
value.0 true
value.1 true
}
control.22 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'CD Playback Volume'
value.0 31
value.1 31
}
control.23 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'CD Playback Switch'
value.0 true
value.1 true
}
control.24 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Aux Playback Volume'
value.0 31
value.1 31
}
control.25 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Aux Playback Switch'
value.0 true
value.1 true
}
control.26 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Analog Mix Playback Volume'
value.0 31
value.1 31
}
control.27 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Analog Mix Playback Switch'
value.0 true
value.1 true
}
control.28 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 54'
comment.dbmin -5850
comment.dbmax 2250
iface MIXER
name 'Capture Volume'
value.0 54
value.1 54
}
control.29 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
}
control.30 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 54'
comment.dbmin -5850
comment.dbmax 2250
iface MIXER
name 'Capture Volume'
index 1
value.0 39
value.1 39
}
control.31 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 1
value.0 false
value.1 false
}
control.32 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 54'
comment.dbmin -5850
comment.dbmax 2250
iface MIXER
name 'Capture Volume'
index 2
value.0 39
value.1 39
}
control.33 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 2
value.0 false
value.1 false
}
control.34 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 'Front Line'
comment.item.4 CD
comment.item.5 Aux
comment.item.6 Mix
iface MIXER
name 'Input Source'
value 'Front Mic'
}
control.35 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 'Front Line'
comment.item.4 CD
comment.item.5 Aux
comment.item.6 Mix
iface MIXER
name 'Input Source'
index 1
value Mic
}
control.36 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 'Front Line'
comment.item.4 CD
comment.item.5 Aux
comment.item.6 Mix
iface MIXER
name 'Input Source'
index 2
value Mic
}
control.37 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 39'
comment.dbmin -5850
comment.dbmax 0
iface MIXER
name 'IEC958 Playback Volume'
value.0 39
value.1 39
}
control.38 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 PCM
comment.item.1 ADC1
comment.item.2 ADC2
comment.item.3 ADC3
iface MIXER
name 'IEC958 Playback Source'
value PCM
}
control.39 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.40 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.41 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.42 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value true
}
control.43 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
}
control.44 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
comment.dbmin -4500
comment.dbmax 0
iface MIXER
name 'Beep Playback Volume'
value 15
}
control.45 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Beep Playback Switch'
value true
}
control.46 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 39'
comment.dbmin -5850
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 38
}
control.47 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.48 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.49 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.50 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.51 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
index 1
value false
}
control.52 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 250
value.1 250
}
}
state.EMU0404 {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'PCM Front Playback Volume'
value.0 100
value.1 100
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'PCM Surround Playback Volume'
value.0 100
value.1 100
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'PCM Side Playback Volume'
value.0 100
value.1 100
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'PCM Center Playback Volume'
value 100
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'PCM LFE Playback Volume'
value 100
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 100
value.1 100
}
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Synth Playback Volume'
value.0 80
value.1 80
}
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'PCM Capture Volume'
value.0 100
value.1 100
}
control.9 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Synth Capture Volume'
value.0 100
value.1 100
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'EMU Capture Volume'
value.0 92
value.1 92
}
control.11 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Mic Playback Volume'
value.0 94
value.1 94
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Mic Capture Volume'
value.0 99
value.1 100
}
control.13 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'CD Playback Volume'
value.0 31
value.1 31
}
control.14 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'CD Capture Volume'
value.0 30
value.1 30
}
control.15 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'IEC958 Optical Playback Volume'
value.0 0
value.1 0
}
control.16 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'IEC958 Optical Capture Volume'
value.0 0
value.1 0
}
control.17 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Line Playback Volume'
value.0 100
value.1 97
}
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Line Capture Volume'
value.0 100
value.1 100
}
control.19 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Analog Mix Playback Volume'
value.0 99
value.1 99
}
control.20 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Analog Mix Capture Volume'
value.0 96
value.1 96
}
control.21 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Aux Playback Volume'
value.0 0
value.1 0
}
control.22 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Aux Capture Volume'
value.0 0
value.1 0
}
control.23 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 100
value.1 100
}
control.24 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Surround Playback Volume'
value.0 100
value.1 100
}
control.25 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Center Playback Volume'
value 100
}
control.26 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'LFE Playback Volume'
value 100
}
control.27 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Side Playback Volume'
value.0 100
value.1 100
}
control.28 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 40'
iface MIXER
name 'Tone Control - Bass'
value.0 20
value.1 20
}
control.29 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 40'
iface MIXER
name 'Tone Control - Treble'
value.0 20
value.1 20
}
control.30 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Tone Control - Switch'
value.0 false
value.1 false
}
control.31 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 100'
comment.dbmin -4000
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 99
}
control.32 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'IEC958 Optical Raw Playback Switch'
value.0 false
value.1 false
}
control.33 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 64
iface PCM
device 2
name 'Captured FX8010 Outputs'
value.0 false
value.1 false
value.2 false
value.3 false
value.4 false
value.5 false
value.6 false
value.7 false
value.8 false
value.9 false
value.10 false
value.11 false
value.12 false
value.13 false
value.14 false
value.15 false
value.16 false
value.17 false
value.18 false
value.19 false
value.20 false
value.21 false
value.22 false
value.23 false
value.24 false
value.25 false
value.26 false
value.27 false
value.28 false
value.29 false
value.30 false
value.31 false
value.32 true
value.33 true
value.34 true
value.35 true
value.36 true
value.37 true
value.38 true
value.39 true
value.40 true
value.41 true
value.42 true
value.43 true
value.44 true
value.45 true
value.46 true
value.47 true
value.48 true
value.49 true
value.50 true
value.51 true
value.52 true
value.53 true
value.54 true
value.55 true
value.56 true
value.57 true
value.58 true
value.59 true
value.60 true
value.61 true
value.62 true
value.63 true
}
control.178 {
comment.access read
comment.type IEC958
comment.count 1
iface PCM
name 'IEC958 Playback Mask'
value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
}
control.179 {
comment.access read
comment.type IEC958
comment.count 1
iface PCM
name 'IEC958 Playback Mask'
index 1
value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
}
control.180 {
comment.access read
comment.type IEC958
comment.count 1
iface PCM
name 'IEC958 Playback Mask'
index 2
value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
}
control.181 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface PCM
name 'IEC958 Playback Default'
value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.182 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface PCM
name 'IEC958 Playback Default'
index 1
value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.183 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface PCM
name 'IEC958 Playback Default'
index 2
value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.184 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC1 Left Playback Enum'
value 'DSP 0'
}
control.185 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC1 Right Playback Enum'
value 'DSP 1'
}
control.186 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC2 Left Playback Enum'
value 'DSP 2'
}
control.187 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC2 Right Playback Enum'
value 'DSP 3'
}
control.188 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC3 Left Playback Enum'
value 'DSP 4'
}
control.189 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC3 Right Playback Enum'
value 'DSP 5'
}
control.190 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC4 Left Playback Enum'
value 'DSP 6'
}
control.191 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock DAC4 Right Playback Enum'
value 'DSP 7'
}
control.192 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock Phones Left Playback Enum'
value 'DSP 0'
}
control.193 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock Phones Right Playback Enum'
value 'DSP 1'
}
control.194 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock SPDIF Left Playback Enum'
value 'DSP 0'
}
control.195 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'Dock SPDIF Right Playback Enum'
value 'DSP 1'
}
control.196 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 SPDIF Left Playback Enum'
value 'DSP 0'
}
control.197 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 SPDIF Right Playback Enum'
value 'DSP 1'
}
control.198 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '0202 DAC Left Playback Enum'
value 'Dock ADC1 Left'
}
control.199 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '0202 DAC Right Playback Enum'
value 'Dock ADC1 Right'
}
control.200 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 0 Playback Enum'
value 'DSP 0'
}
control.201 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 1 Playback Enum'
value 'DSP 1'
}
control.202 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 2 Playback Enum'
value 'DSP 2'
}
control.203 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 3 Playback Enum'
value 'DSP 3'
}
control.204 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 4 Playback Enum'
value 'DSP 4'
}
control.205 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 5 Playback Enum'
value 'DSP 5'
}
control.206 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 6 Playback Enum'
value 'DSP 6'
}
control.207 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name '1010 ADAT 7 Playback Enum'
value 'DSP 7'
}
control.208 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 0 Capture Enum'
value '0202 ADC Left'
}
control.209 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 1 Capture Enum'
value '0202 ADC Right'
}
control.210 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 2 Capture Enum'
value Silence
}
control.211 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 3 Capture Enum'
value Silence
}
control.212 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 4 Capture Enum'
value Silence
}
control.213 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 5 Capture Enum'
value Silence
}
control.214 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 6 Capture Enum'
value Silence
}
control.215 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 7 Capture Enum'
value Silence
}
control.216 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 8 Capture Enum'
value Silence
}
control.217 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 9 Capture Enum'
value Silence
}
control.218 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP A Capture Enum'
value Silence
}
control.219 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP B Capture Enum'
value Silence
}
control.220 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP C Capture Enum'
value Silence
}
control.221 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP D Capture Enum'
value Silence
}
control.222 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP E Capture Enum'
value Silence
}
control.223 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP F Capture Enum'
value Silence
}
control.224 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 10 Capture Enum'
value Silence
}
control.225 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 11 Capture Enum'
value Silence
}
control.226 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 12 Capture Enum'
value Silence
}
control.227 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 13 Capture Enum'
value Silence
}
control.228 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 14 Capture Enum'
value Silence
}
control.229 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Silence
comment.item.1 'Dock Mic A'
comment.item.2 'Dock Mic B'
comment.item.3 'Dock ADC1 Left'
comment.item.4 'Dock ADC1 Right'
comment.item.5 'Dock ADC2 Left'
comment.item.6 'Dock ADC2 Right'
comment.item.7 'Dock ADC3 Left'
comment.item.8 'Dock ADC3 Right'
comment.item.9 '0202 ADC Left'
comment.item.10 '0202 ADC Right'
comment.item.11 '0202 SPDIF Left'
comment.item.12 '0202 SPDIF Right'
comment.item.13 'ADAT 0'
comment.item.14 'ADAT 1'
comment.item.15 'ADAT 2'
comment.item.16 'ADAT 3'
comment.item.17 'ADAT 4'
comment.item.18 'ADAT 5'
comment.item.19 'ADAT 6'
comment.item.20 'ADAT 7'
comment.item.21 'DSP 0'
comment.item.22 'DSP 1'
comment.item.23 'DSP 2'
comment.item.24 'DSP 3'
comment.item.25 'DSP 4'
comment.item.26 'DSP 5'
comment.item.27 'DSP 6'
comment.item.28 'DSP 7'
comment.item.29 'DSP 8'
comment.item.30 'DSP 9'
comment.item.31 'DSP 10'
comment.item.32 'DSP 11'
comment.item.33 'DSP 12'
comment.item.34 'DSP 13'
comment.item.35 'DSP 14'
comment.item.36 'DSP 15'
comment.item.37 'DSP 16'
comment.item.38 'DSP 17'
comment.item.39 'DSP 18'
comment.item.40 'DSP 19'
comment.item.41 'DSP 20'
comment.item.42 'DSP 21'
comment.item.43 'DSP 22'
comment.item.44 'DSP 23'
comment.item.45 'DSP 24'
comment.item.46 'DSP 25'
comment.item.47 'DSP 26'
comment.item.48 'DSP 27'
comment.item.49 'DSP 28'
comment.item.50 'DSP 29'
comment.item.51 'DSP 30'
comment.item.52 'DSP 31'
iface MIXER
name 'DSP 15 Capture Enum'
value Silence
}
control.230 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'ADC1 14dB PAD Audio Dock Capture Switch'
value false
}
control.231 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'ADC2 14dB PAD Audio Dock Capture Switch'
value false
}
control.232 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'ADC3 14dB PAD Audio Dock Capture Switch'
value false
}
control.233 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'ADC1 14dB PAD 0202 Capture Switch'
value false
}
control.234 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'DAC1 Audio Dock 14dB PAD Playback Switch'
value true
}
control.235 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'DAC2 Audio Dock 14dB PAD Playback Switch'
value true
}
control.236 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'DAC3 Audio Dock 14dB PAD Playback Switch'
value true
}
control.237 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'DAC4 Audio Dock 14dB PAD Playback Switch'
value true
}
control.238 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'DAC1 0202 14dB PAD Playback Switch'
value false
}
control.239 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 '44100'
comment.item.1 '48000'
comment.item.2 SPDIF
comment.item.3 ADAT
iface MIXER
name 'Clock Internal Rate'
value '48000'
}
}
state.USB {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PCM Playback Switch'
value true
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '0 - 200'
comment.dbmin 0
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 200
value.1 200
value.2 0
value.3 0
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Extension Unit Switch'
value false
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Extension Unit Switch'
index 1
value true
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Extension Unit Switch'
index 2
value true
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Extension Unit Switch'
index 3
value true
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Moduleipt_REJECTxt_tcpudpiptable_filterip_tablesx_tables
vboxnetadp
vboxnetflt
vboxdrv
bluetoothaf_packet
nfsdsnd_pcm_oss
lockdnfs_aclsnd_mixer_ossauth_rpcgss
sunrpcsnd_emu10k1_synthbinfmt_miscsnd_emux_synthsnd_seq_virmidisnd_seq_midi_emulsnd_seq_midisnd_seq_midi_eventsnd_seq
bridge
stp
llc
fuse
loopdm_modi2c_devdvb_pll
mt352cx88_dvbcx88_vp3054_i2cvideobuf_dvbdvb_coresnd_hda_codec_nvhdmisnd_hda_codec_analog
arc4
ecb
rt73usb
rt2500usb
rt2x00usb
rt2x00lib
cx8800
cx8802
cx88xxled_classsnd_emu10k1gspca_m5602ir_commonsnd_ac97_codeci2c_algo_bitsnd_hda_intelgspca_mainv4l2_commonsnd_hda_codecac97_bus
mac80211
tveepromsnd_usb_audio
videodev
joydev
nvidiair_coresnd_usb_lib
ohci1394snd_pcm
cp210x
cfg80211kvm_amd
videov4l1_compat
usbhid
usblp
pl2303usb_storagevideobuf_dma_sgsnd_util_memsnd_rawmidisnd_timersr_mod
sky2
k10temp
forcedethv4l2_compat_ioctl32
agpgartserio_raw
hidedac_corevideobuf_corebtcx_riscusb_libusual
ieee1394i2c_nforce2
usbserialsnd_hwdepsnd_seq_device
button
rfkill
sg
cdrom
outputasus_atk0110
kvm
sndsnd_page_alloc
soundcoreohci_hcdrtc_cmossd_modrtc_corecrc_t10difehci_hcdrtc_lib
usbcore
edd
xfs
exportfs
w83791dhwmon_vidi2c_core
k8temp
reiserfs
jfs
ahci
fan
processoride_pci_generic
amd74xxide_coreata_genericpata_amd
libatascsi_mod
thermalthermal_sys
hwmon
netconsole
configfs
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x11 0x022140300x12 0x010140100x13 0x511711f00x14 0x02a1902e0x15 0x018130210x16 0x010110120x17 0x01a190200x18 0x993311220x1a 0x91f711f00x1b 0x0145f1f00x1c 0x41c5f1f00x24 0x010160110x25 0x01012014
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:0x05 0x185601100x07 0x585601210x09 0x585601220x0b 0x585601230x0d 0x58560124
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
!!------------------
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:07.0: irq 30 for MSI/MSI-X
HDA Intel 0000:00:07.0: setting latency timer to 64
gspca: probing 0402:5602
--EMU10K1_Audigy 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 ALSA sound/pci/emu10k1/emu10k1_main.c:811: emu1010: Special config.
ALSA sound/pci/emu10k1/emu10k1_main.c:850: emu1010: EMU_HANA_ID = 0x3f
ALSA sound/pci/emu10k1/emu10k1_main.c:869: emu1010: filename emu/emu0404.fw testing EMU10K1_Audigy 0000:01:08.0: firmware: requesting emu/emu0404.fw
--
usbcore: registered new interface driver rt2500usb
ALSA sound/pci/emu10k1/emu10k1_main.c:674: firmware size = 0xd67c
phy1: Selected rate control algorithm 'minstrel'
--
usbcore: registered new interface driver rt73usb
ALSA sound/pci/emu10k1/emu10k1_main.c:886: emu1010: Hana Firmware loaded
ALSA sound/pci/emu10k1/emu10k1_main.c:889: emu1010: Hana version: 1.1
ALSA sound/pci/emu10k1/emu10k1_main.c:894: emu1010: Card options = 0x1
ALSA sound/pci/emu10k1/emu10k1_main.c:896: emu1010: Card options = 0x1
ALSA sound/pci/emu10k1/emu10k1_main.c:935: emu1010: Card options3 = 0x1
ALSA sound/pci/emu10k1/emu10k1_main.c:219: Audigy2 value: Special config.
ALSA sound/pci/emu10k1/emufx.c:1522: EMU outputs on
ALSA sound/pci/emu10k1/emufx.c:1570: EMU2 inputs on
cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14,autodetected], frontend(s): 1 cx88[0]: TV tuner type 4, Radio tuner type -1hda_codec: AD1988B: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4296: dig-out=0x1b/0x0 ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input8
input: cx88 IR (KWorld/VStream XPert D as /devices/pci0000:00/0000:00:08.0/0000:01:09.2/input/input9 --ip_tables: (C) 2000-2006 Netfilter Core Team
ALSA sound/usb/usbaudio.c:354: frame 1 active: -71
kmemleak: 27 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 12 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -75
ALSA sound/usb/usbaudio.c:354: frame 0 active: -75
ALSA sound/usb/usbaudio.c:354: frame 0 active: -71
kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
usb 2-2: USB disconnect, address 3
--
sd 11:0:0:0: [sdd] Attached SCSI removable disk
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:354: frame 0 active: -18
ALSA sound/usb/usbaudio.c:708: cannot submit urb (err = -27)
ALSA sound/usb/usbaudio.c:731: cannot submit sync urb (err = -27)
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
ALSA sound/pci/hda/hda_intel.c:694: azx_get_response timeout, switching to polling mode: last cmd=0x001f000a
Re: HDA Intel Audio hang on boot
At Wed, 27 Jan 2010 17:17:04 +0000,
Quoted 21 lines · Sid Boyce
Quoted 19 lines · Takashi Iwai
At Wed, 27 Jan 2010 02:40:05 +0000,
Quoted 11 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
Quoted 1 line · Sid Boyce
I forgot to mention 2.6.33-rc5 now boots successfully.
Does that mean the problem is fixed in 2.6.33-rc5 or you still need the enable_msi=0 workaround?
Rafael
It boots only with the enable_msi=0 workaround.
OK, then could you run
alsa-info.sh(with --no-upload option), and attach the generated file? I'll add your device to the blacklist for disabling MSI inhda_intel.c.
Quoted 7 lines
Quoted 5 lines
thanks,
Takashi
Thanks.
OK, I added the corresponding quirk entry to sound git tree. The patch will be included in the next pull request so that it'll be fixed in 2.6.33-rc6.
thanks,
Takashi
Re: HDA Intel Audio hang on boot
Quoted 31 lines · Takashi Iwai
At Wed, 27 Jan 2010 17:17:04 +0000,
Quoted 21 lines · Sid Boyce
Quoted 19 lines · Takashi Iwai
At Wed, 27 Jan 2010 02:40:05 +0000,
Quoted 11 lines · Sid Boyce
Quoted 8 lines · Rafael J. Wysocki
Quoted 1 line · Sid Boyce
I forgot to mention 2.6.33-rc5 now boots successfully.
Does that mean the problem is fixed in 2.6.33-rc5 or you still need the enable_msi=0 workaround?
Rafael
It boots only with the enable_msi=0 workaround.
OK, then could you run
alsa-info.sh(with --no-upload option), and attach the generated file? I'll add your device to the blacklist for disabling MSI inhda_intel.c.Quoted 7 lines
Quoted 5 lines
thanks,
Takashi
Thanks.
Quoted 9 lines
OK, I added the corresponding quirk entry to sound git tree. The patch will be included in the next pull request so that it'll be fixed in 2.6.33-rc6.
thanks,
Takashi
Thanks, I shall give a try then.
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
[Bug #14974] tg3 does not resume from hibernation properly on BCM5787M
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14974
Subject : tg3 does not resume from hibernation properly on BCM5787M
Submitter : Chow Loong Jin <hyperair-GeWIH/[email protected]>
Date : 2010-01-02 05:30 (9 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=87668d352aa8d135bd695a050f18bbfc7b50b506
Patch : http://bugzilla.kernel.org/show_bug.cgi?id=14974#c12
[Bug #14949] drm_vm.c:drm_mmap: possible circular locking dependency detected
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14949
Subject : drm_vm.c:drm_mmap: possible circular locking dependency detected
Submitter : Borislav Petkov <[email protected]>
Date : 2009-12-26 9:45 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182073616279&w=4
Re: [Bug #14949] drm_vm.c:drm_mmap: possible circular locking dependency detected
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14949
Subject : drm_vm.c:drm_mmap: possible circular locking dependency detected
Submitter : Borislav Petkov <petkovbb-gM/[email protected]>
Date : 2009-12-26 9:45 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182073616279&w=4
Fix for that is at LKML-Reference: <m1y6kh30pi.fsf_-_-+imSwln9KH6u2/kzUuoCbdi2O/[email protected]>
AFAIR, GregK-H will pick that one up.
Signature · 2 lines
Regards/Gruss,
Boris.Re: [Bug #14949] drm_vm.c:drm_mmap: possible circular locking dependency detected
Quoted 9 lines · Borislav Petkov
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14949
Subject : drm_vm.c:drm_mmap: possible circular locking dependency detected
Submitter : Borislav Petkov <[email protected]>
Date : 2009-12-26 9:45 (16 days old)
References : http://marc.info/?l=linux-kernel&m=126182073616279&w=4Fix for that is at LKML-Reference: <[email protected]>
Again, I don't know how to resolve that, sorry.
Rafael
[Bug #14950] tbench regression with 2.6.33-rc1
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14950
Subject : tbench regression with 2.6.33-rc1
Submitter : Lin Ming <[email protected]>
Date : 2009-12-25 11:11 (17 days old)
References : http://marc.info/?l=linux-kernel&m=126174044213172&w=4
[Bug #14954] warning from alloc_pages_nodemask on boot -- caused by commit 78f1699659963fff97975df44db6d5dbe7218e55
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14954
Subject : warning from alloc_pages_nodemask on boot -- caused by commit 78f1699659963fff97975df44db6d5dbe7218e55
Submitter : Stephen Hemminger <shemminger-de/[email protected]>
Date : 2009-12-29 19:57 (13 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78f1699659963fff97975df44db6d5dbe7218e55
[Bug #14957] Blank screen with KMS enabled
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14957
Subject : Blank screen with KMS enabled
Submitter : Philipp Kohlbecher <[email protected]>
Date : 2009-12-30 00:08 (12 days old)
[Bug #15031] bug in fs/btrfs/ordered-data.c:672
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15031
Subject : bug in fs/btrfs/ordered-data.c:672
Submitter : Carlos R. Mafra <[email protected]>
Date : 2010-01-02 11:32 (9 days old)
References : http://lkml.org/lkml/2010/1/2/17
Patch : http://www.mail-archive.com/[email protected]/msg03686.html
Re: [Bug #15031] bug in fs/btrfs/ordered-data.c:672
Quoted 6 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15031
Subject : bug infs/btrfs/ordered-data.c:672
Submitter : Carlos R. Mafra <[email protected]>
Date : 2010-01-02 11:32 (9 days old)
References : http://lkml.org/lkml/2010/1/2/17Handled-By Yan, Zheng <[email protected]>Patch : http://www.mail-archive.com/[email protected]/msg03686.html
I am using the patch above since Zheng pointed it out to me and the bug no longer appears. But it is not in mainline yet.
Re: [Bug #15031] bug in fs/btrfs/ordered-data.c:672
Quoted 15 lines · Carlos R. Mafra
Quoted 6 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15031
Subject : bug infs/btrfs/ordered-data.c:672
Submitter : Carlos R. Mafra <[email protected]>
Date : 2010-01-02 11:32 (9 days old)
References : http://lkml.org/lkml/2010/1/2/17Handled-By Yan, Zheng <[email protected]>Patch : http://www.mail-archive.com/[email protected]/msg03686.html
Quoted 2 lines
I am using the patch above since Zheng pointed it out to me and the bug no longer appears. But it is not in mainline yet.
Thanks for the update.
Rafael
[Bug #15032] Oops in uart_resume_port() on resume
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15032
Subject : Oops in uart_resume_port() on resume
Submitter : Zdenek Kabelac <[email protected]>
Date : 2010-01-04 15:47 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ba15ab0e8de0d4439a91342ad52d55ca9e313f3d
References : http://marc.info/?l=linux-kernel&m=126262008815689&w=4
[Bug #14976] No sound on snd_hda_codec_via in 2.6.33-rc2
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14976
Subject : No sound on snd_hda_codec_via in 2.6.33-rc2
Submitter : Mark Rosenstand <[email protected]>
Date : 2010-01-02 08:27 (9 days old)
[Bug #15026] i915: Resume regression on MSI Wind U100 w/o KMS
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15026
Subject : i915: Resume regression on MSI Wind U100 w/o KMS
Submitter : Rafael J. Wysocki <[email protected]>
Date : 2010-01-08 23:45 (3 days old)
References : http://marc.info/?l=linux-kernel&m=126299433427673&w=4
[Bug #15037] BUG during shutdown - bisected to commit e2912009
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15037
Subject : BUG during shutdown - bisected to commit e2912009
Submitter : Marc Dionne <[email protected]>
Date : 2010-01-02 0:27 (9 days old)
References : http://marc.info/?l=linux-kernel&m=126239207631034&w=4
Re: [Bug #15037] BUG during shutdown - bisected to commit e2912009
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15037
Subject : BUG during shutdown - bisected to commite2912009Submitter : Marc Dionne <[email protected]> Date : 2010-01-02 0:27 (9 days old)
References : http://marc.info/?l=linux-kernel&m=126239207631034&w=4
Handled-By : Xiaotian Feng <[email protected]> Patch : http://patchwork.kernel.org/patch/71537/
I verified that the BUG still occurs with current git.
The referenced patch does fix the issue for me, but it hasn't made its way into mainline yet.
Thanks,
Marc
Re: [Bug #15037] BUG during shutdown - bisected to commit e2912009
Quoted 17 lines · Marc Dionne
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15037
Subject : BUG during shutdown - bisected to commite2912009
Submitter : Marc Dionne <[email protected]>
Date : 2010-01-02 0:27 (9 days old)
References : http://marc.info/?l=linux-kernel&m=126239207631034&w=4Handled-By Xiaotian Feng <[email protected]>
Quoted 3 lines
I verified that the BUG still occurs with current git.
The referenced patch does fix the issue for me, but it hasn't made its way into mainline yet.
Thanks for the update.
Rafael
[Bug #15034] volano ~30% regression
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15034
Subject : volano ~30% regression
Submitter : Lin Ming <[email protected]>
Date : 2010-01-04 8:15 (7 days old)
References : http://marc.info/?l=linux-kernel&m=126259391411982&w=4
Re: [Bug #15034] volano ~30% regression
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
A verified fix for this one is in the pipe.
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15034
Subject : volano ~30% regression
Submitter : Lin Ming <[email protected]>
Date : 2010-01-04 8:15 (7 days old)
References : http://marc.info/?l=linux-kernel&m=126259391411982&w=4Handled-By Mike Galbraith <[email protected]>
Re: [Bug #15034] volano ~30% regression
Quoted 9 lines · Mike Galbraith
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
A verified fix for this one is in the pipe.
OK, thanks for the update.
A link to that fix would be appreciated. :-)
Rafael
Re: [Bug #15034] volano ~30% regression
Quoted 9 lines · Rafael J. Wysocki
Quoted 8 lines · Mike Galbraith
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Quoted 1 line
A verified fix for this one is in the pipe.
OK, thanks for the update.
A link to that fix would be appreciated. :-)
One link, coming up.
http://patchwork.kernel.org/patch/70623/
-Mike
Re: [Bug #15034] volano ~30% regression
Quoted 12 lines · Mike Galbraith
Quoted 11 lines · Rafael J. Wysocki
Quoted 9 lines · Mike Galbraith
Quoted 6 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
A verified fix for this one is in the pipe.
Quoted 7 lines
Quoted 3 lines
OK, thanks for the update.
A link to that fix would be appreciated. :-)
One link, coming up.
Thanks, I have this one already.
Rafael
[Bug #15035] BUG: unable to handle kernel paging request in rs600_gart_set_page()
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15035
Subject : BUG: unable to handle kernel paging request in rs600_gart_set_page()
Submitter : Xiaotian Feng <[email protected]>
Date : 2010-01-05 19:10 (6 days old)
References : http://lkml.org/lkml/2010/1/5/95
[Bug #15036] soft lockup in dmesg after suspend/resume
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15036
Subject : soft lockup in dmesg after suspend/resume
Submitter : ykzhao <[email protected]>
Date : 2010-01-04 5:36 (7 days old)
References : http://marc.info/?l=linux-kernel&m=126258356202722&w=4
[Bug #15033] drm: gem_object_free without struct_mutex
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15033
Subject : drm: gem_object_free without struct_mutex
Submitter : Hugh Dickins <[email protected]>
Date : 2009-12-30 19:45 (12 days old)
References : http://marc.info/?l=linux-kernel&m=126220236201529&w=4
Re: [Bug #15033] drm: gem_object_free without struct_mutex
Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15033
Subject : drm:gem_object_freewithoutstruct_mutex
Submitter : Hugh Dickins <[email protected]>
Date : 2009-12-30 19:45 (12 days old)
References : http://marc.info/?l=linux-kernel&m=126220236201529&w=4Handled-By Jesse Barnes <[email protected]>
Thanks, Rafael: please close it now. I just checked latest -git and it is now fixed (but not fixed in 2.6.33-rc3) - thanks, Chris.
Hugh
Re: [Bug #15033] drm: gem_object_free without struct_mutex
Quoted 11 lines · Hugh Dickins
Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15033
Subject : drm:gem_object_freewithoutstruct_mutex
Submitter : Hugh Dickins <[email protected]>
Date : 2009-12-30 19:45 (12 days old)
References : http://marc.info/?l=linux-kernel&m=126220236201529&w=4Handled-By Jesse Barnes <[email protected]>Thanks, Rafael: please close it now. I just checked latest -git and it is now fixed (but not fixed in 2.6.33-rc3) - thanks, Chris.
Thanks, closed.
Rafael
[Bug #15043] Display goes off with i915.powersave=1
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15043
Subject : Display goes off with i915.powersave=1
Submitter : Soeren Sonnenburg <[email protected]>
Date : 2010-01-10 20:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126315457519505&w=4
Re: [Bug #15043] Display goes off with i915.powersave=1
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15043
Subject : Display goes off with i915.powersave=1
Submitter : Soeren Sonnenburg <[email protected]>
Date : 2010-01-10 20:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126315457519505&w=4
I just recognized that only the *internal* display (i.e., LVDS1) goes dark while the external display VGA1 stays on. In addition there is some random screen flickering often before the display turns off...
Soeren
Signature · 2 lines
For the one fact about the future of which we can be certain is that it will be utterly fantastic. -- Arthur C. Clarke, 1962
[Bug #15038] drm/ksm: fbdev blanking regression
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15038
Subject : drm/ksm: fbdev blanking regression
Submitter : Johan Hovold <[email protected]>
Date : 2010-01-06 17:00 (5 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=731b5a15a3b1474a41c2ca29b4c32b0f21bc852e
References : http://marc.info/?l=linux-kernel&m=126279726418748&w=4
[Bug #15039] leds_alix2: can't allocate I/O for GPIO
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15039
Subject : leds_alix2: can't allocate I/O for GPIO
Submitter : Arnd Hannemann <[email protected]>
Date : 2010-01-07 10:26 (4 days old)
References : http://marc.info/?l=linux-kernel&m=126286001106257&w=4
[Bug #15041] Pagemap endless read loop with LTP
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <[email protected]>
Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4
Re: [Bug #15041] Pagemap endless read loop with LTP
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <andi-Vw/[email protected]> Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4
According to Andi's later reply, it shoud not be an endless loop, it just takes a rather long time.
Thanks.
Re: [Bug #15041] Pagemap endless read loop with LTP
Quoted 16 lines · Américo Wang
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <[email protected]>
Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4
Quoted 2 lines
According to Andi's later reply, it shoud not be an endless loop, it just takes a rather long time.
Andi?
Re: [Bug #15041] Pagemap endless read loop with LTP
Quoted 17 lines · Rafael J. Wysocki
Quoted 16 lines · Américo Wang
Quoted 14 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <[email protected]>
Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4
Quoted 4 lines
Quoted 2 lines
According to Andi's later reply, it shoud not be an endless loop, it just takes a rather long time.
Andi?
This is expected. Pagemap contains 64 bits per page of _address space_. Sane users will consult ./maps first and then seek.
Signature · 1 line
http://selenic.com : development and support for Mercurial and Linux
Re: [Bug #15041] Pagemap endless read loop with LTP
In reply to Rafael J. WysockiQuoted 17 lines · Rafael J. Wysocki
Quoted 16 lines · Américo Wang
Quoted 14 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <[email protected]>
Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4
Quoted 4 lines
Quoted 2 lines
According to Andi's later reply, it shoud not be an endless loop, it just takes a rather long time.
Andi?
It'll try to read 47 bits worth of 0s on 64bit x86-64.
I haven't tried to wait until that finishes, but I estimate a few months of CPU time at least.
The interface is just misdesigned, but I guess we cannot do anything about that for now. LTP will just need to do a workaround.
This unfortunately breaks older LTP versions.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.
Re: [Bug #15041] Pagemap endless read loop with LTP
Quoted 23 lines · Andi Kleen
Quoted 17 lines · Rafael J. Wysocki
Quoted 16 lines · Américo Wang
Quoted 14 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <andi-Vw/[email protected]>
Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4Quoted 4 lines
Quoted 2 lines
According to Andi's later reply, it shoud not be an endless loop, it just takes a rather long time.
Andi?
Quoted 7 lines
It'll try to read 47 bits worth of 0s on 64bit x86-64.
I haven't tried to wait until that finishes, but I estimate a few months of CPU time at least.
The interface is just misdesigned, but I guess we cannot do anything about that for now.
It's perfectly sensible. What's not sensible is reading the entirety of everything you find in /proc, something that just about every Linux admin figures out moments after running their first recursive grep.
Quoted 1 line
LTP will just need to do a workaround.
Or they could actually, you know, add a test of pagemap. Not much chance of that, though - CVS reports it took them until 2005 to figure out that skipping /proc/kcore was a good idea.
Signature · 1 line
http://selenic.com : development and support for Mercurial and Linux
Re: [Bug #15041] Pagemap endless read loop with LTP
Quoted 36 lines · Matt Mackall
Quoted 23 lines · Andi Kleen
Quoted 17 lines · Rafael J. Wysocki
Quoted 16 lines · Américo Wang
Quoted 14 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.32. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15041
Subject : Pagemap endless read loop with LTP
Submitter : Andi Kleen <[email protected]>
Date : 2010-01-10 2:09 (1 days old)
References : http://marc.info/?l=linux-kernel&m=126308941423848&w=4Quoted 4 lines
Quoted 2 lines
According to Andi's later reply, it shoud not be an endless loop, it just takes a rather long time.
Andi?
Quoted 7 lines
It'll try to read 47 bits worth of 0s on 64bit x86-64.
I haven't tried to wait until that finishes, but I estimate a few months of CPU time at least.
The interface is just misdesigned, but I guess we cannot do anything about that for now.
It's perfectly sensible. What's not sensible is reading the entirety of everything you find in /proc, something that just about every Linux admin figures out moments after running their first recursive grep.
Quoted 5 lines
Quoted 1 line
LTP will just need to do a workaround.
Or they could actually, you know, add a test of pagemap. Not much chance of that, though - CVS reports it took them until 2005 to figure out that skipping
/proc/kcorewas a good idea.
Closing as "documented".
Rafael
Quoted 4 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.32, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
Quoted 8 lines
If you know of any other unresolved regressions from 2.6.32, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to this message with CCs to the people involved in reporting and handling the issue.
Of these only the one below was wireless, which is actually fixed now. Not bad, rc3 and no wireless regressions yet.
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14874
Subject : Ath5k regression with commit8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5Submitter : Joshua Covington <[email protected]>
Date : 2009-12-25 00:49 (17 days old)
Handled-By : Luis R. Rodriguez <[email protected]> Patch : http://bugzilla.kernel.org/attachment.cgi?id=24335
Luis
Quoted 4 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.32, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
Quoted 8 lines
If you know of any other unresolved regressions from 2.6.32, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to this message with CCs to the people involved in reporting and handling the issue.
Of these only the one below was wireless, which is actually fixed now. Not bad, rc3 and no wireless regressions yet.
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14874
Subject : Ath5k regression with commit8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5Submitter : Joshua Covington <[email protected]>
Date : 2009-12-25 00:49 (17 days old)
Handled-By : Luis R. Rodriguez <[email protected]>
Patch : http://bugzilla.kernel.org/attachment.cgi?id=24335
Luis
_______________________________________________
linux-pm mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
Quoted 7 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.32, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.32, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Here are two that I don't see in the list:
* LVDS downclocking breaks on G45/thinkpad T500
LKML: http://lkml.org/lkml/2009/12/26/40 FDO: http://bugs.freedesktop.org/show_bug.cgi?id=25809
* Receive failure in et131x (Alan Cox sent me a patch for this but it's not in mainline yet)
LKML: http://lkml.org/lkml/2009/12/29/210
Signature · 1 line
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
Quoted 9 lines · Nick Bowler
Quoted 7 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.32, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.32, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Quoted 6 lines
Here are two that I don't see in the list:
* LVDS downclocking breaks on G45/thinkpad T500
LKML: http://lkml.org/lkml/2009/12/26/40 FDO: http://bugs.freedesktop.org/show_bug.cgi?id=25809
Added this one.
Quoted 4 lines
* Receive failure in et131x (Alan Cox sent me a patch for this but it's not in mainline yet)
This one is a staging driver, so I'm not going to list it.
Thanks,
Rafael
Quoted 9 lines · Nick Bowler
Quoted 7 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.32, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.32, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Quoted 6 lines
Here are two that I don't see in the list:
* LVDS downclocking breaks on G45/thinkpad T500
LKML: http://lkml.org/lkml/2009/12/26/40 FDO: http://bugs.freedesktop.org/show_bug.cgi?id=25809
Added this one.
Quoted 4 lines
* Receive failure in et131x (Alan Cox sent me a patch for this but it's not in mainline yet)
This one is a staging driver, so I'm not going to list it.
Thanks,
Rafael
Quoted 7 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.32, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.32, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Here are two that I don't see in the list:
* LVDS downclocking breaks on G45/thinkpad T500
LKML: http://lkml.org/lkml/2009/12/26/40 FDO: http://bugs.freedesktop.org/show_bug.cgi?id=25809
* Receive failure in et131x (Alan Cox sent me a patch for this but it's not in mainline yet)
LKML: http://lkml.org/lkml/2009/12/29/210
Signature · 1 line
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)