Skip to contentSkip to conversation

PXA DMA-capable PATA driver

PATCH Superseded Marek Vasut 1 participant 1 message May 17, 2010

Subsystems (4)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 PXA DMA-capable PATA driver

This patch adds a driver for a harddrive attached to PXA address and data bus. Unlike pata_platform, this driver allows usage of PXA DMA controller, making the transmission speed 3x higher.

---
 arch/arm/mach-pxa/include/mach/pata_pxa.h |   33 +++
 drivers/ata/Kconfig                       |   11 +
 drivers/ata/Makefile                      |    1 +
 drivers/ata/pata_pxa.c                    |  404 +++++++++++++++++++++++++++++
 4 files changed, 449 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/pata_pxa.h
 create mode 100644 drivers/ata/pata_pxa.c
arch/arm/mach-pxa/include/mach/pata_pxa.h new file +33 -0
new file mode 100644
index 0000000..6cf7df1
@@ -0,0 +1,33 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef	__MACH_PATA_PXA_H__
+#define	__MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+	/* PXA DMA DREQ<0:2> pin */
+	uint32_t	dma_dreq;
+	/* Register shift */
+	uint32_t	reg_shift;
+	/* IRQ flags */
+	uint32_t	irq_flags;
+};
+
+#endif	/* __MACH_PATA_PXA_H__ */
drivers/ata/Kconfig +11 -0
index 01c52c4..5cd3e8c 100644
@@ -684,6 +684,17 @@ config PATA_VIA
 
 	  If unsure, say N.
 
+config PATA_PXA
+	tristate "PXA DMA-capable PATA support"
+	depends on ARCH_PXA
+	help
+	  This option enables support for harddrive attached to PXA CPU's bus.
+	  
+	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
+	        is not capable of doing MWDMA, use pata_platform instead.
+
+	  If unsure, say N.
+
 config PATA_WINBOND
 	tristate "Winbond SL82C105 PATA support"
 	depends on PCI
drivers/ata/Makefile +1 -0
index fc936d4..5ecf45a 100644
@@ -79,6 +79,7 @@ obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
+obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
 # Should be last but one libata driver
drivers/ata/pata_pxa.c new file +404 -0

404 lines not on this page · raw message

Signature · 1 line
1.7.0