Staging: comedi: fix code warnings in adl_pci9111.c
PATCH 2/2 Staging: comedi: fix code warnings in adl_pci9111.c
From: John Sheehan <[email protected]>
fix some warnings in adl_pci9111.c reported by
checkpatch.pl tool
-printk() should include KERN_ facility level
-no space before tabs
Signed-off-by John Sheehan <[email protected]>
--- drivers/staging/comedi/drivers/adl_pci9111.c | 72 ++++++++++++------------- 1 files changed, 35 insertions(+), 37 deletions(-)
drivers/staging/comedi/drivers/adl_pci9111.c +35 -37
@@ -83,12 +83,12 @@ TODO:#include "comedi_pci.h" #include "comedi_fc.h" -#define PCI9111_DRIVER_NAME "adl_pci9111" -#define PCI9111_HR_DEVICE_ID 0x9111 +#define PCI9111_DRIVER_NAME "adl_pci9111" +#define PCI9111_HR_DEVICE_ID 0x9111/* TODO: Add other pci9111 board id */ -#define PCI9111_IO_RANGE 0x0100 +#define PCI9111_IO_RANGE 0x0100#define PCI9111_FIFO_HALF_SIZE 512
@@ -134,27 +134,27 @@ TODO:/* IO address map */ -#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00/* AD Data stored in FIFO */ -#define PCI9111_REGISTER_DA_OUTPUT 0x00 -#define PCI9111_REGISTER_DIGITAL_IO 0x02 -#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04 -#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06/* Channel selection */ -#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06 -#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08 -#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08 -#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A -#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A -#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E -#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C -#define PCI9111_REGISTER_8254_COUNTER_0 0x40 -#define PCI9111_REGISTER_8254_COUNTER_1 0x42 -#define PCI9111_REGISTER_8254_COUNTER_2 0X44 -#define PCI9111_REGISTER_8254_CONTROL 0x46 -#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48 - -#define PCI9111_TRIGGER_MASK 0x0F -#define PCI9111_PTRG_OFF (0 << 3) -#define PCI9111_PTRG_ON (1 << 3) +#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00/* AD Data stored in FIFO */ +#define PCI9111_REGISTER_DA_OUTPUT 0x00 +#define PCI9111_REGISTER_DIGITAL_IO 0x02 +#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04 +#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06/* Channel selection */ +#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06 +#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08 +#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08 +#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A +#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A +#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E +#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C +#define PCI9111_REGISTER_8254_COUNTER_0 0x40 +#define PCI9111_REGISTER_8254_COUNTER_1 0x42 +#define PCI9111_REGISTER_8254_COUNTER_2 0X44 +#define PCI9111_REGISTER_8254_CONTROL 0x46 +#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48 + +#define PCI9111_TRIGGER_MASK 0x0F +#define PCI9111_PTRG_OFF (0 << 3) +#define PCI9111_PTRG_ON (1 << 3)#define PCI9111_EITS_EXTERNAL (1 << 2)#define PCI9111_EITS_INTERNAL (0 << 2)#define PCI9111_TPST_SOFTWARE_TRIGGER (0 << 1)
@@ -164,9 +164,9 @@ TODO:#define PCI9111_ISC0_SET_IRQ_ON_ENDING_OF_AD_CONVERSION (0 << 0)#define PCI9111_ISC0_SET_IRQ_ON_FIFO_HALF_FULL (1 << 0) -#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1) -#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1) -#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2) +#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1) +#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1) +#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2)#define PCI9111_FFEN_SET_FIFO_DISABLE (1 << 2)#define PCI9111_CHANNEL_MASK 0x0F
@@ -366,7 +366,7 @@ struct pci9111_private_data {short ai_bounce_buffer[2 *PCI9111_FIFO_HALF_SIZE ]; }; -#define dev_private ((struct pci9111_private_data *)dev->private) +#define dev_private ((struct pci9111_private_data *)dev->private)/* ------------------------------------------------------------------ */ /* PLX9050 SECTION */
@@ -1222,7 +1222,7 @@ static int pci9111_attach(struct comedi_device *dev,return -ENOMEM ;/* Probe the device to determine what device in the series it is. */ -printk ("comedi%d: " PCI9111_DRIVER_NAME " driver\n" , dev->minor); +printk (KERN_INFO "comedi%d: " PCI9111_DRIVER_NAME " driver\n" , dev->minor); for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); pci_device != NULL;
@@ -1255,13 +1255,13 @@ static int pci9111_attach(struct comedi_device *dev, } } -printk ("comedi%d: no supported board found! (req. bus/slot : %d/%d)\n" , +printk (KERN_INFO "comedi%d: no supported board found! (req. bus/slot : %d/%d)\n" , dev->minor, it->options[0 ], it->options[1 ]);return -EIO ; found: - printk("comedi%d: found %s (b:s:f=%d:%d:%d) , irq=%d\n", + printk(KERN_INFO "comedi%d: found %s (b:s:f=%d:%d:%d) , irq=%d\n", dev->minor, pci9111_boards[i].name, pci_device->bus->number,
@@ -1275,14 +1275,12 @@ found: lcr_io_base =pci_resource_start (pci_device,1 ); lcr_io_range =pci_resource_len (pci_device,1 ); -printk - ("comedi%d: local configuration registers at address 0x%4lx [0x%4lx]\n" , +printk (KERN_INFO "comedi%d: local configuration registers at address 0x%4lx [0x%4lx]\n" , dev->minor, lcr_io_base, lcr_io_range);/* Enable PCI device and request regions */ if (comedi_pci_enable (pci_device,PCI9111_DRIVER_NAME ) <0 ) { -printk - ("comedi%d: Failed to enable PCI device and request regions\n" , +printk (KERN_ERR "comedi%d: Failed to enable PCI device and request regions\n" , dev->minor);return -EIO ; }
@@ -1291,7 +1289,7 @@ found: io_base =pci_resource_start (pci_device,2 ); io_range =pci_resource_len (pci_device,2 ); -printk ("comedi%d: 6503 registers at address 0x%4lx [0x%4lx]\n" , +printk (KERN_INFO "comedi%d: 6503 registers at address 0x%4lx [0x%4lx]\n" , dev->minor, io_base, io_range); dev->iobase = io_base;
@@ -1309,7 +1307,7 @@ found:if (pci_device->irq >0 ) {if (request_irq (pci_device->irq, pci9111_interrupt,IRQF_SHARED ,PCI9111_DRIVER_NAME , dev) !=0 ) { -printk ("comedi%d: unable to allocate irq %u\n" , +printk (KERN_INFO "comedi%d: unable to allocate irq %u\n" , dev->minor, pci_device->irq);return -EINVAL ; }
Signature · 1 line
1.7.0.4
Quoted 10 lines · John Sheehan
From: John Sheehan <[email protected]>
fix some warnings in
adl_pci9111.creported by
checkpatch.pl tool(quoted diff) +0
-2-printk() should include KERN_ facility level -no space before tabsSigned-off-by John Sheehan <[email protected]>--- drivers/staging/comedi/drivers/adl_pci9111.c | 72 ++++++++++++-------------
This patch (and the other one) don't seem to apply anymore. Care to redo them against the latest linux-next tree and resend them?
thanks,
greg k-h