i915: fix ironlake edp panel setup (v2)
Subsystems (3)
Dave Airlie
maintainerPATCH 1/1 i915: fix ironlake edp panel setup (v2)
From: Dave Airlie <[email protected]>
So the previous fix didn't work for everyone, I read the eDP spec and claims a 20% overhead for encoding, so make sure we take this into account when working out the bandwidth requirements.
This makes my eDP panel happy also, please test on others.
Signed-off-by Dave Airlie <[email protected]>
--- drivers/gpu/drm/i915/intel_dp.c | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +8 -2
@@ -139,6 +139,12 @@ intel_dp_link_required(struct drm_device *dev, }static int +intel_dp_max_data_rate (int max_link_clock,int max_lanes) +{ +return (max_link_clock * max_lanes *8 ) /10 ; +} + +static int intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode) {
@@ -148,7 +154,7 @@ intel_dp_mode_valid(struct drm_connector *connector,int max_lanes =intel_dp_max_lane_count (intel_encoder);if (intel_dp_link_required (connector->dev, intel_encoder, mode->clock) - > max_link_clock * max_lanes) + >intel_dp_max_data_rate (max_link_clock, max_lanes))return MODE_CLOCK_HIGH ;if (mode->clock <10000 )
@@ -509,7 +515,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,for (lane_count =1 ; lane_count <= max_lane_count; lane_count <<=1 ) {for (clock =0 ; clock <= max_clock; clock++) { -int link_avail =intel_dp_link_clock (bws[clock]) * lane_count; +int link_avail =intel_dp_max_data_rate (intel_dp_link_clock (bws[clock]), lane_count);if (intel_dp_link_required (encoder->dev, intel_encoder, mode->clock) <= link_avail) {
Signature · 1 line
1.7.1
Quoted 39 lines · Dave Airlie
From: Dave Airlie <[email protected]>
So the previous fix didn't work for everyone, I read the eDP spec and claims a 20% overhead for encoding, so make sure we take this into account when working out the bandwidth requirements.
This makes my eDP panel happy also, please test on others.
Signed-off-by Dave Airlie <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_dp.c +7
-1@@ -139,6 +139,12 @@ intel_dp_link_required(struct drm_device *dev, }static int +intel_dp_max_data_rate (int max_link_clock,int max_lanes) +{ +return (max_link_clock * max_lanes *8 ) /10 ; +} + +static int intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode) {@@ -148,7 +154,7 @@ intel_dp_mode_valid(struct drm_connector *connector,int max_lanes =intel_dp_max_lane_count (intel_encoder);if (intel_dp_link_required (connector->dev, intel_encoder, mode->clock) - > max_link_clock * max_lanes) + >intel_dp_max_data_rate (max_link_clock, max_lanes))return MODE_CLOCK_HIGH ;if (mode->clock <10000 )
drivers/gpu/drm/i915/intel_dp.c intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, · line 521
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c +1
-1@@ -509,7 +515,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,for (lane_count =1 ; lane_count <= max_lane_count; lane_count <<=1 ) {for (clock =0 ; clock <= max_clock; clock++) { -int link_avail =intel_dp_link_clock (bws[clock]) * lane_count; +int link_avail =intel_dp_max_data_rate (intel_dp_link_clock (bws[clock]), lane_count);if (intel_dp_link_required (encoder->dev, intel_encoder, mode->clock) <= link_avail) {
sorry, this is still broken on the 16x9 panel.
'intel_dp_link_required' is 107840*18/8 = 242640, 'intel_dp_max_data_rate' is 270000*1*8/10 = 216000. So it will fail in both check.
Signature · 3 lines
Open Source Technology Center, Intel ltd. $gpg --keyserver wwwkeys.pgp.net --recv-keys 4D781827
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Dave Airlie
maintainerQuoted 45 lines · Zhenyu Wang
Quoted 44 lines · Dave Airlie
From: Dave Airlie <[email protected]>
So the previous fix didn't work for everyone, I read the eDP spec and claims a 20% overhead for encoding, so make sure we take this into account when working out the bandwidth requirements.
This makes my eDP panel happy also, please test on others.
Signed-off-by Dave Airlie <[email protected]>---
drivers/gpu/drm/i915/intel_dp.c | 10 ++++++++--1 files changed, 8 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_dp.c +0
-0@@ -139,6 +139,12 @@ intel_dp_link_required(struct drm_device *dev, }static int
drivers/gpu/drm/i915/intel_dp.c +6
-0+intel_dp_max_data_rate(int max_link_clock, int max_lanes) +{ + return (max_link_clock * max_lanes * 8) / 10; +} + +static intintel_dp_mode_valid(struct
drm_connector*connector, structdrm_display_mode*mode) {drivers/gpu/drm/i915/intel_dp.c +2
-2@@ -148,7 +154,7 @@ intel_dp_mode_valid(struct drm_connector *connector, int max_lanes = intel_dp_max_lane_count(intel_encoder); if (intel_dp_link_required(connector->dev, intel_encoder, mode->clock) - > max_link_clock * max_lanes) + > intel_dp_max_data_rate(max_link_clock, max_lanes)) return MODE_CLOCK_HIGH; if (mode->clock < 10000)@@ -509,7 +515,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { for (clock = 0; clock <= max_clock; clock++) { - int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; + int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
Quoted 3 lines
drivers/gpu/drm/i915/intel_dp.c +0
-1if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock) <= link_avail) { --sorry, this is still broken on the 16x9 panel.
'
intel_dp_link_required' is 107840*18/8 = 242640, 'intel_dp_max_data_rate' is 270000*1*8/10 = 216000. So it will fail in both check.
So this panel is definitely out of spec, according to the eDP table 3.2 and 3.3
Are you sure this is the mode it actually advertises over EDID vs some crazy mode stored in VBT?
According to the eDP spec it needs 2 lanes and 1.62.
A cvt rb 1600x900 mode would fit okay
cvt -r 1600 900
# 1600x900 59.82 Hz (CVT 1.44M9-R) hsync: 55.40 kHz; pclk: 97.50 MHz
Modeline "1600x900R" 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync
Dave.
This also didn't fix the Dell E6410. I'll also note this in the bug.
I'm trying to work with some contacts at Dell to get this routed to the right person as well...but am having limited luck with that, so far.
Quoted 73 lines · Dave Airlie
Quoted 45 lines · Zhenyu Wang
Quoted 44 lines · Dave Airlie
From: Dave Airlie <[email protected]>
So the previous fix didn't work for everyone, I read the eDP spec and claims a 20% overhead for encoding, so make sure we take this into account when working out the bandwidth requirements.
This makes my eDP panel happy also, please test on others.
Signed-off-by Dave Airlie <[email protected]>---
drivers/gpu/drm/i915/intel_dp.c | 10 ++++++++--1 files changed, 8 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_dp.c +0
-0@@ -139,6 +139,12 @@ intel_dp_link_required(struct drm_device *dev, }static int
drivers/gpu/drm/i915/intel_dp.c +6
-0+intel_dp_max_data_rate(int max_link_clock, int max_lanes) +{ + return (max_link_clock * max_lanes * 8) / 10; +} + +static intintel_dp_mode_valid(struct
drm_connector*connector, structdrm_display_mode*mode) {drivers/gpu/drm/i915/intel_dp.c +2
-2@@ -148,7 +154,7 @@ intel_dp_mode_valid(struct drm_connector *connector, int max_lanes = intel_dp_max_lane_count(intel_encoder); if (intel_dp_link_required(connector->dev, intel_encoder, mode->clock) - > max_link_clock * max_lanes) + > intel_dp_max_data_rate(max_link_clock, max_lanes)) return MODE_CLOCK_HIGH; if (mode->clock < 10000)@@ -509,7 +515,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { for (clock = 0; clock <= max_clock; clock++) { - int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; + int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
Quoted 3 lines
drivers/gpu/drm/i915/intel_dp.c +0
-1if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock) <= link_avail) { --sorry, this is still broken on the 16x9 panel.
'
intel_dp_link_required' is 107840*18/8 = 242640, 'intel_dp_max_data_rate' is 270000*1*8/10 = 216000. So it will fail in both check.So this panel is definitely out of spec, according to the eDP table 3.2 and 3.3
Are you sure this is the mode it actually advertises over EDID vs some crazy mode stored in VBT?
According to the eDP spec it needs 2 lanes and 1.62.
A cvt rb 1600x900 mode would fit okay
cvt -r 1600 900
# 1600x900 59.82 Hz (CVT 1.44M9-R) hsync: 55.40 kHz; pclk: 97.50 MHz Modeline "1600x900R" 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsyncDave.
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 6 lines · Zhenyu Wang
sorry, this is still broken on the 16x9 panel.
'
intel_dp_link_required' is 107840*18/8 = 242640, 'intel_dp_max_data_rate' is 270000*1*8/10 = 216000. So it will fail in both check.
Dave, here's dmesg in working (upstream) and your patch applied cases. Sorry, this panel does have EDID but is invalid.
Signature · 3 lines
Open Source Technology Center, Intel ltd. $gpg --keyserver wwwkeys.pgp.net --recv-keys 4D781827
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.34-rc6-snb (root@snb-beast) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #31 SMP Tue Jun 1 10:36:46 CST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007b6be000 (usable) [ 0.000000] BIOS-e820: 000000007b6be000 - 000000007b75b000 (reserved) [ 0.000000] BIOS-e820: 000000007b75b000 - 000000007b7eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b7eb000 - 000000007b800000 (ACPI data) [ 0.000000] BIOS-e820: 000000007b800000 - 000000007c000000 (reserved) [ 0.000000] BIOS-e820: 000000007dc00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7b6be max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable [ 0.000000] 2 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009d000 (usable) [ 0.000000] modified: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007b6be000 (usable) [ 0.000000] modified: 000000007b6be000 - 000000007b75b000 (reserved) [ 0.000000] modified: 000000007b75b000 - 000000007b7eb000 (ACPI NVS) [ 0.000000] modified: 000000007b7eb000 - 000000007b800000 (ACPI data) [ 0.000000] modified: 000000007b800000 - 000000007c000000 (reserved) [ 0.000000] modified: 000000007dc00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffa00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00fc9c0] fc9c0 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 15000-1a000 [ 0.000000] RAMDISK: 358a8000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 00858000 - 02f9fecf [ 0.000000] Move RAMDISK from 00000000358a8000 - 0000000037fefece to 00858000 - 02f9fece [ 0.000000] 1082MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x0007b6be [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007b6be [ 0.000000] On node 0 totalpages: 505419 [ 0.000000] free_area_init_node: node 0, pgdat c06fc840, node_mem_map c2fa1200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2166 pages used for memmap [ 0.000000] HighMem zone: 275018 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: A M I [ 0.000000] MPTABLE: Product ID: ALASKA [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #4 [ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000. [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c4000000 s38484 r0 d22956 u1048576 [ 0.000000] pcpu-alloc: s38484 r0 d22956 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501469 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-rc6-snb root=UUID=7a8577e3-eee5-4c91-8ee1-e857178f6c63 ro drm.debug=6 text acpi=off [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10110360 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (55 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 0000850014] TEXT DATA BSS [ 0.000000] #3 [0000851000 - 0000857271] BRK [ 0.000000] #4 [00000fc9d0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000fc9c0 - 00000fc9d0] MP-table mpf [ 0.000000] #6 [000009d000 - 00000fc7b0] BIOS reserved [ 0.000000] #7 [00000fc94c - 00000fc9c0] BIOS reserved [ 0.000000] #8 [00000fc7b0 - 00000fc94c] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [0000858000 - 0002fa0000] NEW RAMDISK [ 0.000000] #13 [0002fa0000 - 0002fa1000] BOOTMEM [ 0.000000] #14 [0002fa1000 - 0003f11000] BOOTMEM [ 0.000000] #15 [0003f11000 - 0003f11004] BOOTMEM [ 0.000000] #16 [0003f11040 - 0003f11100] BOOTMEM [ 0.000000] #17 [0003f11100 - 0003f111a8] BOOTMEM [ 0.000000] #18 [0003f111c0 - 0003f141c0] BOOTMEM [ 0.000000] #19 [0003f141c0 - 0003f1428c] BOOTMEM [ 0.000000] #20 [0003f142c0 - 0003f1a2c0] BOOTMEM [ 0.000000] #21 [0003f1a2c0 - 0003f1a2ef] BOOTMEM [ 0.000000] #22 [0003f1a300 - 0003f1a588] BOOTMEM [ 0.000000] #23 [0003f1a5c0 - 0003f1a600] BOOTMEM [ 0.000000] #24 [0003f1a600 - 0003f1a640] BOOTMEM [ 0.000000] #25 [0003f1a640 - 0003f1a680] BOOTMEM [ 0.000000] #26 [0003f1a680 - 0003f1a6c0] BOOTMEM [ 0.000000] #27 [0003f1a6c0 - 0003f1a700] BOOTMEM [ 0.000000] #28 [0003f1a700 - 0003f1a740] BOOTMEM [ 0.000000] #29 [0003f1a740 - 0003f1a780] BOOTMEM [ 0.000000] #30 [0003f1a780 - 0003f1a7c0] BOOTMEM [ 0.000000] #31 [0003f1a7c0 - 0003f1a800] BOOTMEM [ 0.000000] #32 [0003f1a800 - 0003f1a840] BOOTMEM [ 0.000000] #33 [0003f1a840 - 0003f1a880] BOOTMEM [ 0.000000] #34 [0003f1a880 - 0003f1a8c0] BOOTMEM [ 0.000000] #35 [0003f1a8c0 - 0003f1a900] BOOTMEM [ 0.000000] #36 [0003f1a900 - 0003f1a940] BOOTMEM [ 0.000000] #37 [0003f1a940 - 0003f1a980] BOOTMEM [ 0.000000] #38 [0003f1a980 - 0003f1a9c0] BOOTMEM [ 0.000000] #39 [0003f1a9c0 - 0003f1aa00] BOOTMEM [ 0.000000] #40 [0003f1aa00 - 0003f1aa10] BOOTMEM [ 0.000000] #41 [0003f1aa40 - 0003f1aab4] BOOTMEM [ 0.000000] #42 [0003f1aac0 - 0003f1ab34] BOOTMEM [ 0.000000] #43 [0004000000 - 000400f000] BOOTMEM [ 0.000000] #44 [0004100000 - 000410f000] BOOTMEM [ 0.000000] #45 [0003f1cb40 - 0003f1cb44] BOOTMEM [ 0.000000] #46 [0003f1cb80 - 0003f1cb84] BOOTMEM [ 0.000000] #47 [0003f1cbc0 - 0003f1cbc8] BOOTMEM [ 0.000000] #48 [0003f1cc00 - 0003f1cc08] BOOTMEM [ 0.000000] #49 [0003f1cc40 - 0003f1cce0] BOOTMEM [ 0.000000] #50 [0003f1cd00 - 0003f1cd48] BOOTMEM [ 0.000000] #51 [0003f1cd80 - 0003f20d80] BOOTMEM [ 0.000000] #52 [0003f20d80 - 0003fa0d80] BOOTMEM [ 0.000000] #53 [0003fa0d80 - 0003fe0d80] BOOTMEM [ 0.000000] #54 [000410f000 - 0004ab3598] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007b6be) [ 0.000000] Memory: 1947272k/2022136k available (4182k kernel code, 74404k reserved, 1985k data, 644k init, 1108736k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc0707000 - 0xc07a8000 ( 644 kB) [ 0.000000] .data : 0xc0515bc1 - 0xc07061c8 (1985 kB) [ 0.000000] .text : 0xc0100000 - 0xc0515bc1 (4182 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.004000] Fast TSC calibration using PIT [ 0.008000] Detected 2399.906 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.81 BogoMIPS (lpj=9599624) [ 0.000137] Security Framework initialized [ 0.000197] SELinux: Disabled at boot. [ 0.000263] Mount-cache hash table entries: 512 [ 0.000404] Initializing cgroup subsys ns [ 0.000464] Initializing cgroup subsys cpuacct [ 0.000526] Initializing cgroup subsys memory [ 0.000589] Initializing cgroup subsys devices [ 0.000650] Initializing cgroup subsys freezer [ 0.000721] CPU: Physical Processor ID: 0 [ 0.000781] CPU: Processor Core ID: 0 [ 0.000843] mce: CPU supports 9 MCE banks [ 0.000909] CPU0: Thermal monitoring handled by SMI [ 0.000915] using mwait in idle threads. [ 0.000979] Performance Events: Westmere events, Intel PMU driver. [ 0.001097] ... version: 3 [ 0.001157] ... bit width: 48 [ 0.001216] ... generic registers: 4 [ 0.001276] ... value mask: 0000ffffffffffff [ 0.001337] ... max period: 000000007fffffff [ 0.001401] ... fixed-purpose events: 3 [ 0.001458] ... event mask: 000000070000000f [ 0.001525] Checking 'hlt' instruction... OK. [ 0.017177] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.017242] ftrace: allocating 17490 entries in 35 pages [ 0.021880] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.022107] alloc irq_desc for 16 on node 0 [ 0.022109] alloc kstat_irqs on node 0 [ 0.022112] alloc irq_desc for 17 on node 0 [ 0.022113] alloc kstat_irqs on node 0 [ 0.022115] alloc irq_desc for 18 on node 0 [ 0.022116] alloc kstat_irqs on node 0 [ 0.022119] alloc irq_desc for 19 on node 0 [ 0.022120] alloc kstat_irqs on node 0 [ 0.022122] alloc irq_desc for 20 on node 0 [ 0.022123] alloc kstat_irqs on node 0 [ 0.022125] alloc irq_desc for 21 on node 0 [ 0.022126] alloc kstat_irqs on node 0 [ 0.022128] alloc irq_desc for 23 on node 0 [ 0.022129] alloc kstat_irqs on node 0 [ 0.022270] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.062692] CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [ 0.274950] Booting Node 0, Processors #1 Ok. [ 0.285252] Initializing CPU#1 [ 0.362735] CPU1: Thermal monitoring handled by SMI [ 0.382815] Brought up 2 CPUs [ 0.382928] Total of 2 processors activated (9600.23 BogoMIPS). [ 0.383667] devtmpfs: initialized [ 0.383957] Time: 21:53:43 Date: 06/29/10 [ 0.384036] NET: Registered protocol family 16 [ 0.384172] EISA bus registered [ 0.393481] PCI: Using configuration type 1 for base access [ 0.394031] bio: create slab <bio-0> at 0 [ 0.394134] ACPI: Interpreter disabled. [ 0.394223] vgaarb: loaded [ 0.394331] SCSI subsystem initialized [ 0.394424] libata version 3.00 loaded. [ 0.394453] usbcore: registered new interface driver usbfs [ 0.394524] usbcore: registered new interface driver hub [ 0.394601] usbcore: registered new device driver usb [ 0.394702] PCI: Probing PCI hardware [ 0.394763] PCI: Probing PCI hardware (bus 00) [ 0.394822] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit] [ 0.394828] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.394831] pci 0000:00:02.0: reg 20: [io 0x7110-0x7117] [ 0.394912] pci 0000:00:19.0: reg 10: [mem 0x93a00000-0x93a1ffff] [ 0.394919] pci 0000:00:19.0: reg 14: [mem 0x93a60000-0x93a60fff] [ 0.394927] pci 0000:00:19.0: reg 18: [io 0x7020-0x703f] [ 0.394979] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.394984] pci 0000:00:19.0: PME# disabled [ 0.395031] pci 0000:00:1a.0: reg 10: [mem 0x93a50000-0x93a503ff] [ 0.395095] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.395099] pci 0000:00:1a.0: PME# disabled [ 0.395187] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.395191] pci 0000:00:1c.0: PME# disabled [ 0.395286] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.395290] pci 0000:00:1c.6: PME# disabled [ 0.395341] pci 0000:00:1d.0: reg 10: [mem 0x93a40000-0x93a403ff] [ 0.395404] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.395409] pci 0000:00:1d.0: PME# disabled [ 0.395591] pci 0000:00:1f.2: reg 10: [io 0x70f0-0x70f7] [ 0.395598] pci 0000:00:1f.2: reg 14: [io 0x70e0-0x70e3] [ 0.395605] pci 0000:00:1f.2: reg 18: [io 0x70d0-0x70d7] [ 0.395612] pci 0000:00:1f.2: reg 1c: [io 0x70c0-0x70c3] [ 0.395619] pci 0000:00:1f.2: reg 20: [io 0x70b0-0x70bf] [ 0.395626] pci 0000:00:1f.2: reg 24: [io 0x70a0-0x70af] [ 0.395687] pci 0000:00:1f.3: reg 10: [mem 0x93a30000-0x93a300ff 64bit] [ 0.395704] pci 0000:00:1f.3: reg 20: [io 0x7000-0x701f] [ 0.395755] pci 0000:00:1f.5: reg 10: [io 0x7090-0x7097] [ 0.395762] pci 0000:00:1f.5: reg 14: [io 0x7080-0x7083] [ 0.395769] pci 0000:00:1f.5: reg 18: [io 0x7070-0x7077] [ 0.395776] pci 0000:00:1f.5: reg 1c: [io 0x7060-0x7063] [ 0.395783] pci 0000:00:1f.5: reg 20: [io 0x7050-0x705f] [ 0.395790] pci 0000:00:1f.5: reg 24: [io 0x7040-0x704f] [ 0.395864] pci 0000:00:1f.6: reg 10: [mem 0x93a20000-0x93a20fff 64bit] [ 0.395981] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.396049] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.396053] pci 0000:00:1c.0: bridge window [mem 0x92600000-0x939fffff] [ 0.396061] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.396116] pci 0000:00:1c.6: PCI bridge to [bus 02-09] [ 0.396184] pci 0000:00:1c.6: bridge window [io 0x2000-0x5fff] [ 0.396188] pci 0000:00:1c.6: bridge window [mem 0x90400000-0x925fffff] [ 0.396195] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.396268] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) [ 0.396338] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.396343] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.396350] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.396352] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.396354] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode) [ 0.396398] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.396705] PCI: Discovered primary peer bus fe [IRQ] [ 0.396775] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3b01] [ 0.396841] PCI: pci_cache_line_size set to 64 bytes [ 0.396899] reserve RAM buffer: 000000000009d000 - 000000000009ffff [ 0.396901] reserve RAM buffer: 000000007b6be000 - 000000007bffffff [ 0.396958] Switching to clocksource tsc [ 0.398422] pnp: PnP ACPI: disabled [ 0.398482] PnPBIOS: Scanning system for PnP BIOS support... [ 0.398549] PnPBIOS: Found PnP BIOS installation structure at 0xc00f09f0 [ 0.398618] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xba5e, dseg 0xf0000 [ 0.398704] PnPBIOS: get_dev_node: invalid handle [ 0.398767] PnPBIOS: 0 nodes reported by PnP BIOS; 0 recorded by driver [ 0.398931] PCI: max bus depth: 1 pci_try_num: 2 [ 0.398963] pci 0000:00:1c.0: BAR 15: assigned [mem 0x93b00000-0x93cfffff 64bit pref] [ 0.399061] pci 0000:00:1c.6: BAR 15: assigned [mem 0x93d00000-0x93efffff 64bit pref] [ 0.399158] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.399221] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.399293] pci 0000:00:1c.0: bridge window [mem 0x92600000-0x939fffff] [ 0.399363] pci 0000:00:1c.0: bridge window [mem 0x93b00000-0x93cfffff 64bit pref] [ 0.399461] pci 0000:00:1c.6: PCI bridge to [bus 02-09] [ 0.399526] pci 0000:00:1c.6: bridge window [io 0x2000-0x5fff] [ 0.399592] pci 0000:00:1c.6: bridge window [mem 0x90400000-0x925fffff] [ 0.399665] pci 0000:00:1c.6: bridge window [mem 0x93d00000-0x93efffff 64bit pref] [ 0.399766] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] [ 0.399828] pci 0000:00:1e.0: bridge window [io disabled] [ 0.399898] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.399962] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.400049] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.400120] pci 0000:00:1c.0: setting latency timer to 64 [ 0.400133] pci 0000:00:1c.6: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 0.400202] pci 0000:00:1c.6: setting latency timer to 64 [ 0.400210] pci 0000:00:1e.0: setting latency timer to 64 [ 0.400214] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.400215] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.400217] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.400219] pci_bus 0000:01: resource 1 [mem 0x92600000-0x939fffff] [ 0.400221] pci_bus 0000:01: resource 2 [mem 0x93b00000-0x93cfffff 64bit pref] [ 0.400223] pci_bus 0000:02: resource 0 [io 0x2000-0x5fff] [ 0.400224] pci_bus 0000:02: resource 1 [mem 0x90400000-0x925fffff] [ 0.400226] pci_bus 0000:02: resource 2 [mem 0x93d00000-0x93efffff 64bit pref] [ 0.400228] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff] [ 0.400230] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffffffffffff] [ 0.400232] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 0.400233] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.400248] NET: Registered protocol family 2 [ 0.400339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.400523] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.401166] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.401511] TCP: Hash tables configured (established 131072 bind 65536) [ 0.401578] TCP reno registered [ 0.401637] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.401707] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.401831] NET: Registered protocol family 1 [ 0.401906] pci 0000:00:02.0: Boot video device [ 0.450629] PCI: CLS 64 bytes, default 64 [ 0.450689] Trying to unpack rootfs image as initramfs... [ 1.282124] Freeing initrd memory: 40224k freed [ 1.290873] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.291093] cpufreq-nforce2: No nForce2 chipset. [ 1.291170] Scanning for low memory corruption every 60 seconds [ 1.291322] audit: initializing netlink socket (disabled) [ 1.291398] type=2000 audit(1277848423.173:1): initialized [ 1.298960] highmem bounce pool size: 64 pages [ 1.299025] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.299973] VFS: Disk quotas dquot_6.5.2 [ 1.300066] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.300426] fuse init (API version 7.13) [ 1.300541] msgmni has been set to 1716 [ 1.300734] alg: No test for stdrng (krng) [ 1.300830] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.300927] io scheduler noop registered [ 1.300988] io scheduler deadline registered [ 1.301073] io scheduler cfq registered (default) [ 1.301195] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.301240] alloc irq_desc for 24 on node -1 [ 1.301242] alloc kstat_irqs on node -1 [ 1.301253] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 1.301343] pcieport 0000:00:1c.6: setting latency timer to 64 [ 1.301384] alloc irq_desc for 25 on node -1 [ 1.301386] alloc kstat_irqs on node -1 [ 1.301393] pcieport 0000:00:1c.6: irq 25 for MSI/MSI-X [ 1.301471] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13 [ 1.301542] pcie_pme: probe of 0000:00:1c.6:pcie01 failed with error -13 [ 1.301619] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.301705] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.301818] isapnp: Scanning for PnP cards... [ 1.655528] isapnp: No Plug & Play device found [ 1.656370] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.656568] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.656795] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 1.657587] brd: module loaded [ 1.657962] loop: module loaded [ 1.658103] ata_piix 0000:00:1f.2: version 2.13 [ 1.658121] ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 1.658196] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.812598] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.812665] scsi0 : ata_piix [ 1.812774] scsi1 : ata_piix [ 1.812860] ata1: SATA max UDMA/133 cmd 0x70f0 ctl 0x70e0 bmdma 0x70b0 irq 19 [ 1.812936] ata2: SATA max UDMA/133 cmd 0x70d0 ctl 0x70c0 bmdma 0x70b8 irq 19 [ 1.813032] ata_piix 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 1.813123] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.968352] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 1.968459] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.968492] scsi2 : ata_piix [ 1.968581] scsi3 : ata_piix [ 1.968656] ata3: SATA max UDMA/133 cmd 0x7090 ctl 0x7080 bmdma 0x7050 irq 19 [ 1.968728] ata4: SATA max UDMA/133 cmd 0x7070 ctl 0x7060 bmdma 0x7058 irq 19 [ 1.968986] Fixed MDIO Bus: probed [ 1.969068] PPP generic driver version 2.4.2 [ 1.969152] tun: Universal TUN/TAP device driver, 1.6 [ 1.969215] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.969328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.969412] ehci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.969493] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.969496] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.969579] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.969701] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.973699] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.973709] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x93a50000 [ 1.988316] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.988475] hub 1-0:1.0: USB hub found [ 1.988537] hub 1-0:1.0: 2 ports detected [ 1.988639] ehci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23 [ 1.988716] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.988719] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.988807] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.988926] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.992932] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.992942] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x93a40000 [ 2.008286] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.008439] hub 2-0:1.0: USB hub found [ 2.008501] hub 2-0:1.0: 2 ports detected [ 2.008598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.008672] uhci_hcd: USB Universal Host Controller Interface driver [ 2.008775] PNP: No PS/2 controller found. Probing ports directly. [ 2.010779] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.010846] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.010944] mice: PS/2 mouse device common for all mice [ 2.011051] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 2.011144] rtc0: alarms up to one day, 114 bytes nvram [ 2.011226] EISA: Probing bus 0 at eisa.0 [ 2.011295] Cannot allocate resource for EISA slot 2 [ 2.011360] Cannot allocate resource for EISA slot 3 [ 2.011423] Cannot allocate resource for EISA slot 4 [ 2.011487] Cannot allocate resource for EISA slot 5 [ 2.011551] Cannot allocate resource for EISA slot 6 [ 2.011616] Cannot allocate resource for EISA slot 7 [ 2.011683] EISA: Detected 0 cards. [ 2.011793] cpuidle: using governor ladder [ 2.011855] cpuidle: using governor menu [ 2.012058] TCP cubic registered [ 2.012119] NET: Registered protocol family 17 [ 2.012198] Using IPI No-Shortcut mode [ 2.012301] PM: Resume from disk failed. [ 2.012308] registered taskstats version 1 [ 2.012539] Magic number: 14:746:905 [ 2.012636] rtc_cmos rtc_cmos: setting system clock to 2010-06-29 21:53:44 UTC (1277848424) [ 2.012736] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.012803] EDD information not available. [ 2.034068] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.299972] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.432337] hub 1-1:1.0: USB hub found [ 2.432555] hub 1-1:1.0: 6 ports detected [ 2.543611] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.675962] hub 2-1:1.0: USB hub found [ 2.676058] hub 2-1:1.0: 8 ports detected [ 3.170678] ata1.01: failed to resume link (SControl 0) [ 3.170833] ata2.01: failed to resume link (SControl 0) [ 3.326531] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.326617] ata2.01: SATA link down (SStatus 0 SControl 0) [ 3.326697] ata2.01: link offline, clearing class 3 to NONE [ 3.326909] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.326993] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3.335202] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133 [ 3.335276] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.350844] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, UO01, max UDMA/100 [ 3.351412] ata1.00: configured for UDMA/133 [ 3.351561] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5 [ 3.351730] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.351838] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.352702] sd 0:0:0:0: [sda] Write Protect is off [ 3.352766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.352780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.352967] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 [ 3.430534] ata2.00: configured for UDMA/100 [ 3.446682] sda8 > [ 3.447049] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.533145] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A UO01 PQ: 0 ANSI: 5 [ 3.683377] sr0: scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.683477] Uniform CD-ROM driver Revision: 3.20 [ 3.683587] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.683621] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.683716] Freeing unused kernel memory: 644k freed [ 3.683945] Write protecting the kernel text: 4184k [ 3.684047] Write protecting the kernel read-only data: 1672k [ 3.694590] udev: starting version 151 [ 3.741210] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.741279] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 3.741375] e1000e 0000:00:19.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 3.741449] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.741537] alloc irq_desc for 26 on node -1 [ 3.741539] alloc kstat_irqs on node -1 [ 3.741549] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 3.853579] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:20:f8:4b:8c [ 3.853672] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.853807] 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: ffffff-0ff [ 4.699547] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 7.381765] udev: starting version 151 [ 8.147441] udev: renamed network interface eth0 to eth1 [ 8.559573] Linux agpgart interface v0.103 [ 8.574035] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 8.574633] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 8.640014] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 9.367683] [drm] Initialized drm 1.1.0 20060810 [ 9.775459] i915 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 9.775464] i915 0000:00:02.0: setting latency timer to 64 [ 9.789584] alloc irq_desc for 27 on node -1 [ 9.789587] alloc kstat_irqs on node -1 [ 9.789595] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 9.789603] [drm] set up 31M of stolen space [ 9.789631] [drm:i915_gem_init_hws], hws offset: 0x01fff000 [ 9.789765] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 9.789770] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 9.789772] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 0 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 9.789781] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 9.789795] [drm:intel_modeset_init], 2 display pipes available. [ 9.790049] [drm:intel_lvds_init], LVDS is not present in VBT [ 9.790106] [drm:intel_dp_i2c_init], i2c_init DPDDC-A [ 9.790308] [drm:intel_dp_i2c_aux_ch], aux_ch nack [ 9.790509] [drm:intel_dp_i2c_aux_ch], aux_ch nack [ 9.790871] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 9.793396] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 9.793399] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 9.795924] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 9.795926] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 9.795993] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 9.798519] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 9.798520] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 9.801046] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 9.801048] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 9.808732] Slow work thread pool: Starting up [ 9.808779] Slow work thread pool: Ready [ 9.808788] [drm:intel_dp_link_down], [ 9.825728] [drm:ironlake_edp_backlight_off], [ 9.825744] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 9.826462] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 9.826464] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 9.826466] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 9.827084] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 9.827202] [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50000 [ 9.835594] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 9.835597] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 9.837096] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.863434] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.889748] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.916091] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.942398] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.968677] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.995019] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.021399] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.047756] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.074107] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.100542] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.127428] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.153861] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.180206] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.206570] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.232923] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.259270] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.285614] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.311908] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.338181] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.364524] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.390866] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.417244] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.443641] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.469984] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.496328] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.522670] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.549119] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.575459] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.601994] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.628395] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.654750] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.681385] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.707788] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.734095] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.760369] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.786726] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.813063] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.839412] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.866298] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.892662] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.919096] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.945512] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.971944] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 10.998293] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.024706] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.051176] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.077506] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.103864] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.130204] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.156490] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.182837] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.209219] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.209222] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 159 [ 11.209322] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 11.209389] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.209391] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.209392] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.209394] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.209396] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.209397] <3>cc cc cc cc cc cc cc cc 00 65 cd 1d 40 90 10 c4 .........e..@... [ 11.209399] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.209401] <3>00 00 00 00 00 eb 08 bf 0a 10 00 00 00 00 00 00 ................ [ 11.209402] [ 11.235739] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.235742] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 159 [ 11.235840] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 11.235905] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.235907] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.235908] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.235910] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.235912] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.235913] <3>cc cc cc cc cc cc cc cc 00 65 cd 1d 40 90 10 c4 .........e..@... [ 11.235915] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.235916] <3>00 00 00 00 00 eb 08 bf 0a 10 00 00 00 00 00 00 ................ [ 11.235918] [ 11.262307] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.262309] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 159 [ 11.262406] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 11.262471] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.262473] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.262474] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.262476] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.262478] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.262479] <3>cc cc cc cc cc cc cc cc 00 65 cd 1d 40 90 10 c4 .........e..@... [ 11.262481] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.262482] <3>00 00 00 00 00 eb 08 bf 0a 10 00 00 00 00 00 00 ................ [ 11.262484] [ 11.288798] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 11.288801] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 159 [ 11.288900] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 11.288966] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.288968] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.288970] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.288971] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.288973] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.288974] <3>cc cc cc cc cc cc cc cc 00 65 cd 1d 40 90 10 c4 .........e..@... [ 11.288976] <3>cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 11.288978] <3>00 00 00 00 00 eb 08 bf 0a 10 00 00 00 00 00 00 ................ [ 11.288979] [ 11.288982] i915 0000:00:02.0: DisplayPort-1: EDID block 51 invalid. [ 11.288994] [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [ 11.288997] [drm:drm_mode_debug_printmodeline], Modeline 18:"1600x900" 60 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 11.289003] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 11.293600] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 11.293602] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 11.298200] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 11.298202] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 11.300728] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 11.300731] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 11.300733] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 11.303258] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 11.303261] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 11.303263] [drm:drm_setup_crtcs], [ 11.303265] [drm:drm_enable_connectors], connector 5 enabled? no [ 11.303267] [drm:drm_enable_connectors], connector 7 enabled? yes [ 11.303269] [drm:drm_enable_connectors], connector 10 enabled? no [ 11.303271] [drm:drm_enable_connectors], connector 12 enabled? no [ 11.303273] [drm:drm_enable_connectors], connector 14 enabled? no [ 11.303275] [drm:drm_enable_connectors], connector 16 enabled? no [ 11.303277] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 11.303279] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 11.303281] [drm:drm_target_preferred], found mode 1600x900 [ 11.303283] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 11.303286] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3 [ 11.315719] [drm:intelfb_create], allocated 1600x900 fb: 0x02030000, bo c20b4e40 [ 11.315792] fb0: inteldrmfb frame buffer device [ 11.315794] registered panic notifier [ 11.315798] [drm:intel_opregion_init], graphic opregion physical addr: 0x7b7a3018 [ 11.315806] [drm:intel_opregion_init], Public ACPI methods supported [ 11.315808] [drm:intel_opregion_init], SWSCI supported [ 11.315809] [drm:intel_opregion_init], ASLE supported [ 11.315824] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.704099] [drm:drm_crtc_helper_set_config], [ 11.704101] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 11.704110] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 11.704112] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 11.704114] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 11.704116] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x900" 60 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 11.704121] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 11.704122] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 11.704124] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 11.704125] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 11.704127] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x900" 60 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 11.704133] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000 [ 11.704151] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 11.704154] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 11.704156] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 11.704567] [drm:ironlake_disable_pll_edp], [ 11.704978] [drm:intel_crtc_mode_set], Mode for pipe A: [ 11.704980] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x900" 60 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 11.704983] [drm:ironlake_disable_pll_edp], [ 11.704987] [drm:ironlake_set_pll_edp], eDP PLL enable for clock 270000 [ 11.725860] [drm:intel_pipe_set_base], Writing base 02030000 00000000 0 0 [ 11.749820] [drm:intel_update_watermarks], plane A (pipe 0) clock: 107840 [ 11.749825] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 16 [ 11.749830] [drm:ironlake_update_wm], self-refresh watermark: display plane 102 cursor 6 [ 11.749836] [drm:ironlake_crtc_dpms], crtc 0 dpms on [ 11.777300] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 11.777762] [drm:ironlake_edp_backlight_on], [ 11.777783] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 11.777785] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 11.777787] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 11.778402] [drm:drm_crtc_helper_set_config], [ 11.778403] [drm:drm_crtc_helper_set_config], crtc: f756a800 4 fb: c2883cbc connectors: c2595a00 num_connectors: 0 (x, y) (0, 0) [ 11.778408] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 11.778409] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 11.778424] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 11.778426] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 11.778428] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 11.779062] [drm:drm_crtc_helper_set_config], [ 11.779063] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 11.779068] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 11.783245] Console: switching to colour frame buffer device 200x56 [ 11.783250] [drm:drm_crtc_helper_set_config], [ 11.783251] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 11.783255] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 11.807101] [drm:drm_crtc_helper_set_config], [ 11.807103] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 11.807111] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.102636] [drm:i915_driver_open], [ 18.102651] [drm:drm_crtc_helper_set_config], [ 18.102653] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 18.102663] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.102666] [drm:drm_crtc_helper_set_config], [ 18.102667] [drm:drm_crtc_helper_set_config], crtc: f756a800 4 fb: c2883cbc connectors: c2595a00 num_connectors: 0 (x, y) (0, 0) [ 18.102671] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 18.102673] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.102691] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 18.102694] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 18.102696] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 18.103317] [drm:i915_driver_open], [ 18.103322] [drm:drm_crtc_helper_set_config], [ 18.103324] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 18.103328] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.103330] [drm:drm_crtc_helper_set_config], [ 18.103331] [drm:drm_crtc_helper_set_config], crtc: f756a800 4 fb: c2883cbc connectors: c2595a00 num_connectors: 0 (x, y) (0, 0) [ 18.103335] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 18.103337] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.103352] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 18.103354] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 18.103357] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 18.103976] [drm:i915_driver_open], [ 18.104029] [drm:drm_mode_getresources], Counted 2 6 6 [ 18.104032] [drm:drm_mode_getresources], Counted 2 6 6 [ 18.104035] [drm:drm_mode_getconnector], connector id 5: [ 18.104038] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 18.104043] [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50000 [ 18.112435] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 18.112711] [drm:drm_mode_getconnector], connector id 5: [ 18.112713] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 18.112718] [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50000 [ 18.121108] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 18.121149] [drm:drm_mode_getconnector], connector id 7: [ 18.121151] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 18.122651] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.148993] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.172414] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 18.175358] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.201767] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.201769] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 18.201807] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201809] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201810] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201812] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201814] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201815] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201817] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201818] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.201820] [ 18.228241] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 18.229097] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.229099] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 18.229131] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229133] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229134] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229136] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229138] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229139] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229141] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229142] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.229144] [ 18.255482] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.255485] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 18.255522] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255524] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255525] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255527] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255529] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255530] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255532] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255533] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.255535] [ 18.281879] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.281880] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 18.281911] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281912] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281914] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281916] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281917] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281919] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281920] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281922] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 18.281923] [ 18.281926] i915 0000:00:02.0: DisplayPort-1: EDID block 2 invalid. [ 18.282006] [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [ 18.282008] [drm:drm_mode_debug_printmodeline], Modeline 18:"1600x900" 60 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 18.282020] [drm:drm_mode_getconnector], connector id 7: [ 18.293103] [drm:drm_mode_getconnector], connector id 10: [ 18.293111] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 18.297708] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 18.297713] [drm:drm_mode_getconnector], connector id 10: [ 18.297715] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 18.302305] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 18.302310] [drm:drm_mode_getconnector], connector id 12: [ 18.302312] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 18.306919] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 18.306922] [drm:drm_mode_getconnector], connector id 12: [ 18.306924] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 18.311516] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 18.311520] [drm:drm_mode_getconnector], connector id 14: [ 18.311522] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 18.314049] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 18.314052] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 18.314054] [drm:drm_mode_getconnector], connector id 14: [ 18.314056] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 18.316584] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 18.316587] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 18.316590] [drm:drm_mode_getconnector], connector id 16: [ 18.316592] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 18.319118] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 18.319120] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 18.319122] [drm:drm_mode_getconnector], connector id 16: [ 18.319124] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 18.321650] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 18.321652] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 18.416000] [drm:drm_crtc_helper_set_config], [ 18.416003] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 18.416012] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.432256] [drm:drm_crtc_helper_set_config], [ 18.432259] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 18.432266] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.432269] [drm:drm_crtc_helper_set_config], [ 18.432270] [drm:drm_crtc_helper_set_config], crtc: f756a800 4 fb: c2883cbc connectors: c2595a00 num_connectors: 0 (x, y) (0, 0) [ 18.432274] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 18.432276] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 18.432293] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 18.432296] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 18.432299] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 18.432938] [drm:drm_crtc_helper_set_config], [ 18.432939] [drm:drm_crtc_helper_set_config], crtc: f756b000 3 fb: c2883cbc connectors: c25959f0 num_connectors: 1 (x, y) (0, 0) [ 18.432943] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to f756b000 [ 19.995680] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 19.995683] 0000:00:19.0: eth1: 10/100 speed: disabling TSO [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.34-rc6-alt (root@snb-beast) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #12 SMP Mon Jun 28 09:25:42 CST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007b6be000 (usable) [ 0.000000] BIOS-e820: 000000007b6be000 - 000000007b75b000 (reserved) [ 0.000000] BIOS-e820: 000000007b75b000 - 000000007b7eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b7eb000 - 000000007b800000 (ACPI data) [ 0.000000] BIOS-e820: 000000007b800000 - 000000007c000000 (reserved) [ 0.000000] BIOS-e820: 000000007dc00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7b6be max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable [ 0.000000] 2 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009d000 (usable) [ 0.000000] modified: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007b6be000 (usable) [ 0.000000] modified: 000000007b6be000 - 000000007b75b000 (reserved) [ 0.000000] modified: 000000007b75b000 - 000000007b7eb000 (ACPI NVS) [ 0.000000] modified: 000000007b7eb000 - 000000007b800000 (ACPI data) [ 0.000000] modified: 000000007b800000 - 000000007c000000 (reserved) [ 0.000000] modified: 000000007dc00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffa00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00fc9c0] fc9c0 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 15000-1a000 [ 0.000000] RAMDISK: 358a9000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 00858000 - 02f9e5b4 [ 0.000000] Move RAMDISK from 00000000358a9000 - 0000000037fef5b3 to 00858000 - 02f9e5b3 [ 0.000000] 1082MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x0007b6be [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007b6be [ 0.000000] On node 0 totalpages: 505419 [ 0.000000] free_area_init_node: node 0, pgdat c06fc840, node_mem_map c2fa0200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2166 pages used for memmap [ 0.000000] HighMem zone: 275018 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: A M I [ 0.000000] MPTABLE: Product ID: ALASKA [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #4 [ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000. [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c4000000 s38484 r0 d22956 u1048576 [ 0.000000] pcpu-alloc: s38484 r0 d22956 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501469 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-rc6-alt root=UUID=7a8577e3-eee5-4c91-8ee1-e857178f6c63 ro drm.debug=6 text acpi=off [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10110360 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (55 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 0000850014] TEXT DATA BSS [ 0.000000] #3 [0000851000 - 0000857271] BRK [ 0.000000] #4 [00000fc9d0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000fc9c0 - 00000fc9d0] MP-table mpf [ 0.000000] #6 [000009d000 - 00000fc7b0] BIOS reserved [ 0.000000] #7 [00000fc94c - 00000fc9c0] BIOS reserved [ 0.000000] #8 [00000fc7b0 - 00000fc94c] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [0000858000 - 0002f9f000] NEW RAMDISK [ 0.000000] #13 [0002f9f000 - 0002fa0000] BOOTMEM [ 0.000000] #14 [0002fa0000 - 0003f10000] BOOTMEM [ 0.000000] #15 [0003f10000 - 0003f10004] BOOTMEM [ 0.000000] #16 [0003f10040 - 0003f10100] BOOTMEM [ 0.000000] #17 [0003f10100 - 0003f101a8] BOOTMEM [ 0.000000] #18 [0003f101c0 - 0003f131c0] BOOTMEM [ 0.000000] #19 [0003f131c0 - 0003f1328c] BOOTMEM [ 0.000000] #20 [0003f132c0 - 0003f192c0] BOOTMEM [ 0.000000] #21 [0003f192c0 - 0003f192ef] BOOTMEM [ 0.000000] #22 [0003f19300 - 0003f19588] BOOTMEM [ 0.000000] #23 [0003f195c0 - 0003f19600] BOOTMEM [ 0.000000] #24 [0003f19600 - 0003f19640] BOOTMEM [ 0.000000] #25 [0003f19640 - 0003f19680] BOOTMEM [ 0.000000] #26 [0003f19680 - 0003f196c0] BOOTMEM [ 0.000000] #27 [0003f196c0 - 0003f19700] BOOTMEM [ 0.000000] #28 [0003f19700 - 0003f19740] BOOTMEM [ 0.000000] #29 [0003f19740 - 0003f19780] BOOTMEM [ 0.000000] #30 [0003f19780 - 0003f197c0] BOOTMEM [ 0.000000] #31 [0003f197c0 - 0003f19800] BOOTMEM [ 0.000000] #32 [0003f19800 - 0003f19840] BOOTMEM [ 0.000000] #33 [0003f19840 - 0003f19880] BOOTMEM [ 0.000000] #34 [0003f19880 - 0003f198c0] BOOTMEM [ 0.000000] #35 [0003f198c0 - 0003f19900] BOOTMEM [ 0.000000] #36 [0003f19900 - 0003f19940] BOOTMEM [ 0.000000] #37 [0003f19940 - 0003f19980] BOOTMEM [ 0.000000] #38 [0003f19980 - 0003f199c0] BOOTMEM [ 0.000000] #39 [0003f199c0 - 0003f19a00] BOOTMEM [ 0.000000] #40 [0003f19a00 - 0003f19a10] BOOTMEM [ 0.000000] #41 [0003f19a40 - 0003f19ab4] BOOTMEM [ 0.000000] #42 [0003f19ac0 - 0003f19b34] BOOTMEM [ 0.000000] #43 [0004000000 - 000400f000] BOOTMEM [ 0.000000] #44 [0004100000 - 000410f000] BOOTMEM [ 0.000000] #45 [0003f1bb40 - 0003f1bb44] BOOTMEM [ 0.000000] #46 [0003f1bb80 - 0003f1bb84] BOOTMEM [ 0.000000] #47 [0003f1bbc0 - 0003f1bbc8] BOOTMEM [ 0.000000] #48 [0003f1bc00 - 0003f1bc08] BOOTMEM [ 0.000000] #49 [0003f1bc40 - 0003f1bce0] BOOTMEM [ 0.000000] #50 [0003f1bd00 - 0003f1bd48] BOOTMEM [ 0.000000] #51 [0003f1bd80 - 0003f1fd80] BOOTMEM [ 0.000000] #52 [0003f1fd80 - 0003f9fd80] BOOTMEM [ 0.000000] #53 [0003f9fd80 - 0003fdfd80] BOOTMEM [ 0.000000] #54 [000410f000 - 0004ab3598] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007b6be) [ 0.000000] Memory: 1947276k/2022136k available (4182k kernel code, 74400k reserved, 1985k data, 644k init, 1108736k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc0707000 - 0xc07a8000 ( 644 kB) [ 0.000000] .data : 0xc0515bc1 - 0xc07061c8 (1985 kB) [ 0.000000] .text : 0xc0100000 - 0xc0515bc1 (4182 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.004000] Fast TSC calibration using PIT [ 0.008000] Detected 2399.934 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.86 BogoMIPS (lpj=9599736) [ 0.000141] Security Framework initialized [ 0.000204] SELinux: Disabled at boot. [ 0.000268] Mount-cache hash table entries: 512 [ 0.000411] Initializing cgroup subsys ns [ 0.000474] Initializing cgroup subsys cpuacct [ 0.000532] Initializing cgroup subsys memory [ 0.000599] Initializing cgroup subsys devices [ 0.000654] Initializing cgroup subsys freezer [ 0.000727] CPU: Physical Processor ID: 0 [ 0.000784] CPU: Processor Core ID: 0 [ 0.000846] mce: CPU supports 9 MCE banks [ 0.000909] CPU0: Thermal monitoring handled by SMI [ 0.000915] using mwait in idle threads. [ 0.000979] Performance Events: Westmere events, Intel PMU driver. [ 0.001095] ... version: 3 [ 0.001151] ... bit width: 48 [ 0.001212] ... generic registers: 4 [ 0.001268] ... value mask: 0000ffffffffffff [ 0.001334] ... max period: 000000007fffffff [ 0.001392] ... fixed-purpose events: 3 [ 0.001449] ... event mask: 000000070000000f [ 0.001515] Checking 'hlt' instruction... OK. [ 0.017186] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.017249] ftrace: allocating 17490 entries in 35 pages [ 0.021882] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.022106] alloc irq_desc for 16 on node 0 [ 0.022108] alloc kstat_irqs on node 0 [ 0.022110] alloc irq_desc for 17 on node 0 [ 0.022112] alloc kstat_irqs on node 0 [ 0.022114] alloc irq_desc for 18 on node 0 [ 0.022115] alloc kstat_irqs on node 0 [ 0.022117] alloc irq_desc for 19 on node 0 [ 0.022118] alloc kstat_irqs on node 0 [ 0.022120] alloc irq_desc for 20 on node 0 [ 0.022121] alloc kstat_irqs on node 0 [ 0.022123] alloc irq_desc for 21 on node 0 [ 0.022124] alloc kstat_irqs on node 0 [ 0.022126] alloc irq_desc for 23 on node 0 [ 0.022127] alloc kstat_irqs on node 0 [ 0.022268] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.062686] CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [ 0.274961] Booting Node 0, Processors #1 Ok. [ 0.285267] Initializing CPU#1 [ 0.362747] CPU1: Thermal monitoring handled by SMI [ 0.382830] Brought up 2 CPUs [ 0.382944] Total of 2 processors activated (9600.29 BogoMIPS). [ 0.383690] devtmpfs: initialized [ 0.383980] Time: 21:47:33 Date: 06/29/10 [ 0.384058] NET: Registered protocol family 16 [ 0.384194] EISA bus registered [ 0.393484] PCI: Using configuration type 1 for base access [ 0.394027] bio: create slab <bio-0> at 0 [ 0.394134] ACPI: Interpreter disabled. [ 0.394223] vgaarb: loaded [ 0.394329] SCSI subsystem initialized [ 0.394421] libata version 3.00 loaded. [ 0.394450] usbcore: registered new interface driver usbfs [ 0.394522] usbcore: registered new interface driver hub [ 0.394602] usbcore: registered new device driver usb [ 0.394700] PCI: Probing PCI hardware [ 0.394761] PCI: Probing PCI hardware (bus 00) [ 0.394821] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit] [ 0.394827] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.394830] pci 0000:00:02.0: reg 20: [io 0x7110-0x7117] [ 0.394910] pci 0000:00:19.0: reg 10: [mem 0x93a00000-0x93a1ffff] [ 0.394918] pci 0000:00:19.0: reg 14: [mem 0x93a60000-0x93a60fff] [ 0.394925] pci 0000:00:19.0: reg 18: [io 0x7020-0x703f] [ 0.394979] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.394983] pci 0000:00:19.0: PME# disabled [ 0.395030] pci 0000:00:1a.0: reg 10: [mem 0x93a50000-0x93a503ff] [ 0.395092] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.395097] pci 0000:00:1a.0: PME# disabled [ 0.395183] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.395187] pci 0000:00:1c.0: PME# disabled [ 0.395282] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.395287] pci 0000:00:1c.6: PME# disabled [ 0.395337] pci 0000:00:1d.0: reg 10: [mem 0x93a40000-0x93a403ff] [ 0.395400] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.395404] pci 0000:00:1d.0: PME# disabled [ 0.395586] pci 0000:00:1f.2: reg 10: [io 0x70f0-0x70f7] [ 0.395593] pci 0000:00:1f.2: reg 14: [io 0x70e0-0x70e3] [ 0.395600] pci 0000:00:1f.2: reg 18: [io 0x70d0-0x70d7] [ 0.395607] pci 0000:00:1f.2: reg 1c: [io 0x70c0-0x70c3] [ 0.395614] pci 0000:00:1f.2: reg 20: [io 0x70b0-0x70bf] [ 0.395621] pci 0000:00:1f.2: reg 24: [io 0x70a0-0x70af] [ 0.395682] pci 0000:00:1f.3: reg 10: [mem 0x93a30000-0x93a300ff 64bit] [ 0.395700] pci 0000:00:1f.3: reg 20: [io 0x7000-0x701f] [ 0.395751] pci 0000:00:1f.5: reg 10: [io 0x7090-0x7097] [ 0.395758] pci 0000:00:1f.5: reg 14: [io 0x7080-0x7083] [ 0.395765] pci 0000:00:1f.5: reg 18: [io 0x7070-0x7077] [ 0.395771] pci 0000:00:1f.5: reg 1c: [io 0x7060-0x7063] [ 0.395778] pci 0000:00:1f.5: reg 20: [io 0x7050-0x705f] [ 0.395785] pci 0000:00:1f.5: reg 24: [io 0x7040-0x704f] [ 0.395860] pci 0000:00:1f.6: reg 10: [mem 0x93a20000-0x93a20fff 64bit] [ 0.395975] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.396040] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.396044] pci 0000:00:1c.0: bridge window [mem 0x92600000-0x939fffff] [ 0.396052] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.396107] pci 0000:00:1c.6: PCI bridge to [bus 02-09] [ 0.396168] pci 0000:00:1c.6: bridge window [io 0x2000-0x5fff] [ 0.396173] pci 0000:00:1c.6: bridge window [mem 0x90400000-0x925fffff] [ 0.396181] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.396254] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) [ 0.396324] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.396328] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.396336] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.396338] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.396340] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode) [ 0.396382] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.396695] PCI: Discovered primary peer bus fe [IRQ] [ 0.396765] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3b01] [ 0.396835] PCI: pci_cache_line_size set to 64 bytes [ 0.396891] reserve RAM buffer: 000000000009d000 - 000000000009ffff [ 0.396893] reserve RAM buffer: 000000007b6be000 - 000000007bffffff [ 0.396950] Switching to clocksource tsc [ 0.398408] pnp: PnP ACPI: disabled [ 0.398469] PnPBIOS: Scanning system for PnP BIOS support... [ 0.398533] PnPBIOS: Found PnP BIOS installation structure at 0xc00f09f0 [ 0.398603] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xba5e, dseg 0xf0000 [ 0.398683] PnPBIOS: get_dev_node: invalid handle [ 0.398745] PnPBIOS: 0 nodes reported by PnP BIOS; 0 recorded by driver [ 0.398911] PCI: max bus depth: 1 pci_try_num: 2 [ 0.398944] pci 0000:00:1c.0: BAR 15: assigned [mem 0x93b00000-0x93cfffff 64bit pref] [ 0.399037] pci 0000:00:1c.6: BAR 15: assigned [mem 0x93d00000-0x93efffff 64bit pref] [ 0.399135] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.399201] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.399274] pci 0000:00:1c.0: bridge window [mem 0x92600000-0x939fffff] [ 0.399345] pci 0000:00:1c.0: bridge window [mem 0x93b00000-0x93cfffff 64bit pref] [ 0.399442] pci 0000:00:1c.6: PCI bridge to [bus 02-09] [ 0.399508] pci 0000:00:1c.6: bridge window [io 0x2000-0x5fff] [ 0.399580] pci 0000:00:1c.6: bridge window [mem 0x90400000-0x925fffff] [ 0.399652] pci 0000:00:1c.6: bridge window [mem 0x93d00000-0x93efffff 64bit pref] [ 0.399754] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] [ 0.399817] pci 0000:00:1e.0: bridge window [io disabled] [ 0.399887] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.399955] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.400044] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.400116] pci 0000:00:1c.0: setting latency timer to 64 [ 0.400128] pci 0000:00:1c.6: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 0.400199] pci 0000:00:1c.6: setting latency timer to 64 [ 0.400207] pci 0000:00:1e.0: setting latency timer to 64 [ 0.400211] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.400212] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.400214] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.400216] pci_bus 0000:01: resource 1 [mem 0x92600000-0x939fffff] [ 0.400218] pci_bus 0000:01: resource 2 [mem 0x93b00000-0x93cfffff 64bit pref] [ 0.400220] pci_bus 0000:02: resource 0 [io 0x2000-0x5fff] [ 0.400221] pci_bus 0000:02: resource 1 [mem 0x90400000-0x925fffff] [ 0.400223] pci_bus 0000:02: resource 2 [mem 0x93d00000-0x93efffff 64bit pref] [ 0.400225] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff] [ 0.400227] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffffffffffff] [ 0.400228] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 0.400230] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.400245] NET: Registered protocol family 2 [ 0.400334] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.400519] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.401168] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.401516] TCP: Hash tables configured (established 131072 bind 65536) [ 0.401586] TCP reno registered [ 0.401647] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.401720] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.401840] NET: Registered protocol family 1 [ 0.401912] pci 0000:00:02.0: Boot video device [ 0.450640] PCI: CLS 64 bytes, default 64 [ 0.450702] Trying to unpack rootfs image as initramfs... [ 1.282083] Freeing initrd memory: 40220k freed [ 1.290841] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.291063] cpufreq-nforce2: No nForce2 chipset. [ 1.291141] Scanning for low memory corruption every 60 seconds [ 1.291293] audit: initializing netlink socket (disabled) [ 1.291369] type=2000 audit(1277848054.173:1): initialized [ 1.298970] highmem bounce pool size: 64 pages [ 1.299036] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.299977] VFS: Disk quotas dquot_6.5.2 [ 1.300069] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.300427] fuse init (API version 7.13) [ 1.300541] msgmni has been set to 1716 [ 1.300732] alg: No test for stdrng (krng) [ 1.300829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.300926] io scheduler noop registered [ 1.300987] io scheduler deadline registered [ 1.301072] io scheduler cfq registered (default) [ 1.301193] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.301238] alloc irq_desc for 24 on node -1 [ 1.301240] alloc kstat_irqs on node -1 [ 1.301251] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 1.301325] pcieport 0000:00:1c.6: setting latency timer to 64 [ 1.301383] alloc irq_desc for 25 on node -1 [ 1.301384] alloc kstat_irqs on node -1 [ 1.301392] pcieport 0000:00:1c.6: irq 25 for MSI/MSI-X [ 1.301470] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13 [ 1.301542] pcie_pme: probe of 0000:00:1c.6:pcie01 failed with error -13 [ 1.301619] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.301705] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.301818] isapnp: Scanning for PnP cards... [ 1.655528] isapnp: No Plug & Play device found [ 1.656370] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.656568] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.656795] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 1.657582] brd: module loaded [ 1.657954] loop: module loaded [ 1.658094] ata_piix 0000:00:1f.2: version 2.13 [ 1.658112] ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 1.658186] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.812609] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.812676] scsi0 : ata_piix [ 1.812785] scsi1 : ata_piix [ 1.812871] ata1: SATA max UDMA/133 cmd 0x70f0 ctl 0x70e0 bmdma 0x70b0 irq 19 [ 1.812948] ata2: SATA max UDMA/133 cmd 0x70d0 ctl 0x70c0 bmdma 0x70b8 irq 19 [ 1.813042] ata_piix 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 1.813133] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.968363] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 1.968472] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.968505] scsi2 : ata_piix [ 1.968596] scsi3 : ata_piix [ 1.968672] ata3: SATA max UDMA/133 cmd 0x7090 ctl 0x7080 bmdma 0x7050 irq 19 [ 1.968742] ata4: SATA max UDMA/133 cmd 0x7070 ctl 0x7060 bmdma 0x7058 irq 19 [ 1.968999] Fixed MDIO Bus: probed [ 1.969081] PPP generic driver version 2.4.2 [ 1.969165] tun: Universal TUN/TAP device driver, 1.6 [ 1.969230] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.969344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.969428] ehci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.969510] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.969513] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.969597] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.969720] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.973708] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.973718] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x93a50000 [ 1.988327] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.988489] hub 1-0:1.0: USB hub found [ 1.988552] hub 1-0:1.0: 2 ports detected [ 1.988655] ehci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23 [ 1.988730] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.988733] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.988820] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.988941] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.992941] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.992950] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x93a40000 [ 2.008297] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.008450] hub 2-0:1.0: USB hub found [ 2.008512] hub 2-0:1.0: 2 ports detected [ 2.008608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.008682] uhci_hcd: USB Universal Host Controller Interface driver [ 2.008785] PNP: No PS/2 controller found. Probing ports directly. [ 2.010783] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.010850] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.010946] mice: PS/2 mouse device common for all mice [ 2.011053] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 2.011146] rtc0: alarms up to one day, 114 bytes nvram [ 2.011227] EISA: Probing bus 0 at eisa.0 [ 2.011295] Cannot allocate resource for EISA slot 2 [ 2.011358] Cannot allocate resource for EISA slot 3 [ 2.011422] Cannot allocate resource for EISA slot 4 [ 2.011485] Cannot allocate resource for EISA slot 5 [ 2.011549] Cannot allocate resource for EISA slot 6 [ 2.011613] Cannot allocate resource for EISA slot 7 [ 2.011682] EISA: Detected 0 cards. [ 2.011791] cpuidle: using governor ladder [ 2.011851] cpuidle: using governor menu [ 2.012055] TCP cubic registered [ 2.012114] NET: Registered protocol family 17 [ 2.012193] Using IPI No-Shortcut mode [ 2.012299] PM: Resume from disk failed. [ 2.012305] registered taskstats version 1 [ 2.012535] Magic number: 14:643:804 [ 2.012632] rtc_cmos rtc_cmos: setting system clock to 2010-06-29 21:47:35 UTC (1277848055) [ 2.012732] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.012799] EDD information not available. [ 2.034271] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.299987] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.432347] hub 1-1:1.0: USB hub found [ 2.432439] hub 1-1:1.0: 6 ports detected [ 2.543626] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.675970] hub 2-1:1.0: USB hub found [ 2.676067] hub 2-1:1.0: 8 ports detected [ 3.170693] ata1.01: failed to resume link (SControl 0) [ 3.170848] ata2.01: failed to resume link (SControl 0) [ 3.326550] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.326638] ata2.01: SATA link down (SStatus 0 SControl 0) [ 3.326716] ata2.01: link offline, clearing class 3 to NONE [ 3.326929] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.327015] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3.350650] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, UO01, max UDMA/100 [ 3.383570] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133 [ 3.383642] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.399072] ata1.00: configured for UDMA/133 [ 3.399221] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5 [ 3.399394] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.399504] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.400368] sd 0:0:0:0: [sda] Write Protect is off [ 3.400432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.400447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.400631] sda: sda1 sda2 sda3 sda4 < sda5 sda6 [ 3.446526] ata2.00: configured for UDMA/100 [ 3.460125] sda7 sda8 > [ 3.477656] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.537015] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A UO01 PQ: 0 ANSI: 5 [ 3.687277] sr0: scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.687379] Uniform CD-ROM driver Revision: 3.20 [ 3.687493] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.687527] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.687623] Freeing unused kernel memory: 644k freed [ 3.687854] Write protecting the kernel text: 4184k [ 3.687951] Write protecting the kernel read-only data: 1672k [ 3.698493] udev: starting version 151 [ 3.746973] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.747045] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 3.747142] e1000e 0000:00:19.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 3.747219] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.747306] alloc irq_desc for 26 on node -1 [ 3.747307] alloc kstat_irqs on node -1 [ 3.747319] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 3.859491] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:20:f8:4b:8c [ 3.859589] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.859719] 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: ffffff-0ff [ 4.686203] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 8.830066] udev: starting version 151 [ 10.284177] udev: renamed network interface eth0 to eth1 [ 11.209497] Linux agpgart interface v0.103 [ 11.213397] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 11.213989] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 11.279482] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 12.987505] [drm] Initialized drm 1.1.0 20060810 [ 13.855366] i915 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 13.855370] i915 0000:00:02.0: setting latency timer to 64 [ 13.869133] alloc irq_desc for 27 on node -1 [ 13.869137] alloc kstat_irqs on node -1 [ 13.869145] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 13.869153] [drm] set up 31M of stolen space [ 13.869183] [drm:i915_gem_init_hws], hws offset: 0x01fff000 [ 13.869316] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 13.869321] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 13.869323] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 0 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 13.869332] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 13.869346] [drm:intel_modeset_init], 2 display pipes available. [ 13.869552] [drm:intel_lvds_init], LVDS is not present in VBT [ 13.869610] [drm:intel_dp_i2c_init], i2c_init DPDDC-A [ 13.869813] [drm:intel_dp_i2c_aux_ch], aux_ch nack [ 13.870014] [drm:intel_dp_i2c_aux_ch], aux_ch nack [ 13.870378] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 13.872905] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 13.872907] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 13.875432] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 13.875434] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 13.875502] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 13.878028] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 13.878030] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 13.880583] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 13.880585] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 13.886943] Slow work thread pool: Starting up [ 13.886970] Slow work thread pool: Ready [ 13.886976] [drm:intel_dp_link_down], [ 13.903917] [drm:ironlake_edp_backlight_off], [ 13.903932] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 13.904650] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 13.904652] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 13.904654] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 13.905272] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 13.905278] [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50000 [ 13.913638] zhen: CRT is not detected [ 13.913640] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 13.913642] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 13.915147] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 13.941493] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 13.967924] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 13.994202] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.020546] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.046911] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.073267] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.099665] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.126007] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.152348] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.178701] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.205046] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.231476] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.257942] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.284289] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.310635] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.336986] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.363404] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.389865] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.416193] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.442624] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.469033] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.495346] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.521689] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.548039] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.574382] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.600923] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.627275] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.653627] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.680041] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.706383] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.732793] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.759224] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.785567] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.811913] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.838243] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.864734] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.891153] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.917647] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.950581] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 14.977050] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.003393] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.029889] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.056234] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.082640] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.108933] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.135394] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.161727] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.187998] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.188001] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 202 [ 15.188102] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 15.188169] <3>cc cc cc cc cc cc cc cc cc cc cc cc ff ff ff ff ................ [ 15.188170] <3>20 12 01 00 c0 93 bc c2 d0 84 6c c0 00 00 00 00 .........l..... [ 15.188172] <3>20 12 01 00 d4 17 76 c2 46 00 00 00 43 4a 1d c0 .....v.F...CJ.. [ 15.188174] <3>78 66 00 c4 cc cc cc cc cc cc cc cc cc cc cc cc xf.............. [ 15.188175] <3>20 12 01 00 c0 00 00 00 00 13 45 f7 00 00 00 00 .........E..... [ 15.188177] <3>20 12 01 00 dc 17 76 c2 43 4a 1d c0 10 18 76 c2 .....v.CJ....v. [ 15.188179] <3>26 4b 1d c0 80 66 0b c2 00 00 00 00 1c 13 45 f7 &K...f........E. [ 15.188180] <3>20 00 00 00 00 17 88 c2 78 87 6c c0 00 00 00 00 .......x.l..... [ 15.188182] [ 15.214532] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.214534] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 202 [ 15.214633] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 15.214697] <3>cc cc cc cc cc cc cc cc cc cc cc cc ff ff ff ff ................ [ 15.214699] <3>20 12 01 00 c0 93 bc c2 d0 84 6c c0 00 00 00 00 .........l..... [ 15.214700] <3>20 12 01 00 d4 17 76 c2 46 00 00 00 43 4a 1d c0 .....v.F...CJ.. [ 15.214702] <3>78 66 00 c4 cc cc cc cc cc cc cc cc cc cc cc cc xf.............. [ 15.214704] <3>20 12 01 00 c0 00 00 00 00 13 45 f7 00 00 00 00 .........E..... [ 15.214705] <3>20 12 01 00 dc 17 76 c2 43 4a 1d c0 10 18 76 c2 .....v.CJ....v. [ 15.214707] <3>26 4b 1d c0 80 66 0b c2 00 00 00 00 1c 13 45 f7 &K...f........E. [ 15.214709] <3>20 00 00 00 00 17 88 c2 78 87 6c c0 00 00 00 00 .......x.l..... [ 15.214710] [ 15.241129] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.241131] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 202 [ 15.241228] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 15.241294] <3>cc cc cc cc cc cc cc cc cc cc cc cc ff ff ff ff ................ [ 15.241295] <3>20 12 01 00 c0 93 bc c2 d0 84 6c c0 00 00 00 00 .........l..... [ 15.241297] <3>20 12 01 00 d4 17 76 c2 46 00 00 00 43 4a 1d c0 .....v.F...CJ.. [ 15.241299] <3>78 66 00 c4 cc cc cc cc cc cc cc cc cc cc cc cc xf.............. [ 15.241300] <3>20 12 01 00 c0 00 00 00 00 13 45 f7 00 00 00 00 .........E..... [ 15.241302] <3>20 12 01 00 dc 17 76 c2 43 4a 1d c0 10 18 76 c2 .....v.CJ....v. [ 15.241304] <3>26 4b 1d c0 80 66 0b c2 00 00 00 00 1c 13 45 f7 &K...f........E. [ 15.241305] <3>20 00 00 00 00 17 88 c2 78 87 6c c0 00 00 00 00 .......x.l..... [ 15.241307] [ 15.267649] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.267652] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 202 [ 15.267750] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 15.267816] <3>cc cc cc cc cc cc cc cc cc cc cc cc ff ff ff ff ................ [ 15.267818] <3>20 12 01 00 c0 93 bc c2 d0 84 6c c0 00 00 00 00 .........l..... [ 15.267819] <3>20 12 01 00 d4 17 76 c2 46 00 00 00 43 4a 1d c0 .....v.F...CJ.. [ 15.267821] <3>78 66 00 c4 cc cc cc cc cc cc cc cc cc cc cc cc xf.............. [ 15.267823] <3>20 12 01 00 c0 00 00 00 00 13 45 f7 00 00 00 00 .........E..... [ 15.267824] <3>20 12 01 00 dc 17 76 c2 43 4a 1d c0 10 18 76 c2 .....v.CJ....v. [ 15.267826] <3>26 4b 1d c0 80 66 0b c2 00 00 00 00 1c 13 45 f7 &K...f........E. [ 15.267828] <3>20 00 00 00 00 17 88 c2 78 87 6c c0 00 00 00 00 .......x.l..... [ 15.267829] [ 15.267832] i915 0000:00:02.0: DisplayPort-1: EDID block 47 invalid. [ 15.267998] [drm:drm_mode_debug_printmodeline], Modeline 18:"1600x900" 0 107840 1600 1691 1752 1904 900 906 917 944 0x8 0x0 [ 15.268003] [drm:drm_mode_prune_invalid], Not using 1600x900 mode 15 [ 15.268008] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 15.272616] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 15.272619] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 15.277214] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 15.277216] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 15.279742] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 15.279744] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 15.279746] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 15.282272] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 15.282274] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 15.282276] No connectors reported connected with modes [ 15.282278] [drm:drm_setup_crtcs], [ 15.282280] [drm:drm_enable_connectors], connector 5 enabled? no [ 15.282282] [drm:drm_enable_connectors], connector 7 enabled? yes [ 15.282284] [drm:drm_enable_connectors], connector 10 enabled? no [ 15.282286] [drm:drm_enable_connectors], connector 12 enabled? no [ 15.282288] [drm:drm_enable_connectors], connector 14 enabled? no [ 15.282289] [drm:drm_enable_connectors], connector 16 enabled? no [ 15.282291] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 15.282293] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 15.282295] [drm:drm_target_preferred], found mode none [ 15.282297] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 15.282300] [drm:drm_fb_helper_single_fb_probe] *ERROR* Cannot find any crtc or sizes - going 1024x768 [ 15.291481] [drm:intelfb_create], allocated 1024x768 fb: 0x02020000, bo c27e6000 [ 15.291643] fb0: inteldrmfb frame buffer device [ 15.291645] registered panic notifier [ 15.291650] [drm:intel_opregion_init], graphic opregion physical addr: 0x7b7a3018 [ 15.291658] [drm:intel_opregion_init], Public ACPI methods supported [ 15.291660] [drm:intel_opregion_init], SWSCI supported [ 15.291662] [drm:intel_opregion_init], ASLE supported [ 15.291676] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 16.178463] [drm:drm_crtc_helper_set_config], [ 16.178465] [drm:drm_crtc_helper_set_config], crtc: c282e000 3 fb: c27d14bc connectors: f7749f00 num_connectors: 0 (x, y) (0, 0) [ 16.178474] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 16.178492] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 16.178495] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 16.178497] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 16.179111] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 16.179113] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 16.179115] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 16.179729] [drm:drm_crtc_helper_set_config], [ 16.179731] [drm:drm_crtc_helper_set_config], crtc: c282d000 4 fb: c27d14bc connectors: f7749f10 num_connectors: 0 (x, y) (0, 0) [ 16.179734] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 16.179749] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 16.179750] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 16.179752] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 16.180367] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 16.180368] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 16.180370] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 16.183249] Console: switching to colour frame buffer device 128x48 [ 17.453646] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 17.509465] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 18.682648] [drm:i915_driver_open], [ 18.682664] [drm:drm_crtc_helper_set_config], [ 18.682666] [drm:drm_crtc_helper_set_config], crtc: c282e000 3 fb: c27d14bc connectors: f7749f00 num_connectors: 0 (x, y) (0, 0) [ 18.682674] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 18.682693] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 18.682696] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 18.682698] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 18.683313] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 18.683315] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 18.683317] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 18.683931] [drm:drm_crtc_helper_set_config], [ 18.683933] [drm:drm_crtc_helper_set_config], crtc: c282d000 4 fb: c27d14bc connectors: f7749f10 num_connectors: 0 (x, y) (0, 0) [ 18.683938] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 18.683953] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 18.683955] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 18.683957] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 18.684571] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 18.684573] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 18.684576] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 18.685196] [drm:i915_driver_open], [ 18.685202] [drm:drm_crtc_helper_set_config], [ 18.685203] [drm:drm_crtc_helper_set_config], crtc: c282e000 3 fb: c27d14bc connectors: f7749f00 num_connectors: 0 (x, y) (0, 0) [ 18.685207] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 18.685222] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 18.685224] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 18.685226] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 18.685841] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 18.685843] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 18.685845] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 18.686460] [drm:drm_crtc_helper_set_config], [ 18.686461] [drm:drm_crtc_helper_set_config], crtc: c282d000 4 fb: c27d14bc connectors: f7749f10 num_connectors: 0 (x, y) (0, 0) [ 18.686465] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 18.686480] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 18.686482] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 18.686484] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 18.687098] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 18.687100] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 18.687102] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 18.687790] [drm:i915_driver_open], [ 18.687842] [drm:drm_mode_getresources], Counted 2 6 6 [ 18.687845] [drm:drm_mode_getresources], Counted 2 6 6 [ 18.687849] [drm:drm_mode_getconnector], connector id 5: [ 18.687852] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 18.687858] [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50000 [ 18.696228] zhen: CRT is not detected [ 18.696230] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 18.696233] [drm:drm_mode_getconnector], connector id 5: [ 18.696235] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 18.696239] [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50000 [ 18.704602] zhen: CRT is not detected [ 18.704603] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 18.704608] [drm:drm_mode_getconnector], connector id 7: [ 18.704610] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 18.706109] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.732446] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.758794] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.785139] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.811478] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.837884] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.864221] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.890625] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.916973] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.943387] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.969733] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.996141] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.022554] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.048825] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.075234] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.101619] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.127963] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.129941] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 19.129943] 0000:00:19.0: eth1: 10/100 speed: disabling TSO [ 19.158237] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.184631] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.210968] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.237423] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.263719] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.290193] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.316530] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.342872] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.369223] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.395635] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.422054] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.448653] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.474999] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.501409] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.527822] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.554166] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.580512] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.606935] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.633330] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.659740] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.686149] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.719734] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.749363] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.775708] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.802130] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.828482] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.854803] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.881161] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.907502] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.933844] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.960214] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.986562] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.012906] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.039366] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.065715] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.092099] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.118437] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.144775] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.171116] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.197465] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.223811] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.250151] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.276498] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.302848] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.329196] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.355542] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.381949] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.408317] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.434664] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.461010] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.487276] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.513645] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.540073] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.566413] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.592764] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.619024] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.645362] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.671700] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.698125] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.724529] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.750932] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.777270] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.803609] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.829950] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.856290] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.882628] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.908967] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.935304] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.961643] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 20.987983] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.014321] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.040663] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.067005] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.093354] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.119703] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.146042] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.172383] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.198736] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.225147] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.251489] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.277832] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.304174] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.330517] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.356859] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.383200] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.409546] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.435886] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.462227] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.488569] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.514910] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.541251] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.567592] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.593936] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.620278] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.646619] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.672959] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.699300] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.725641] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.751983] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.778325] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.804671] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.831013] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.857356] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.883698] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.910039] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.936383] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.962724] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 21.989065] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.015409] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.041748] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.068089] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.094427] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.120765] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.147103] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.173442] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.199777] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.226115] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.252454] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.278792] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.305132] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.331470] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.357808] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.384146] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.410484] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.436819] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.463154] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.489488] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.515823] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.542158] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.568493] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.594828] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.621165] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.647501] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.673838] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.700174] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.726512] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.752850] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.779188] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.805526] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.831865] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.858201] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.884538] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.910876] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.937215] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.963553] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 22.989890] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.016226] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.042563] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.068900] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.095236] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.121573] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.147909] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.174247] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.200585] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.226923] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.253261] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.279600] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.305936] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.332273] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.358609] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.384946] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.411286] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.437624] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.463963] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.490301] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.516638] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.542975] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.569311] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.595648] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.621986] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.648324] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.674662] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.701000] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.727338] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.753676] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.780014] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.806352] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.832690] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.859028] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.885364] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.911700] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.938038] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.964375] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 23.990711] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.017048] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.043384] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.069720] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.096057] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.122393] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.148729] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.175066] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.201402] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.227739] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.254075] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.280412] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.306748] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.333084] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.359421] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.385758] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.412096] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.438434] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.464772] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.491110] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.517448] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.543787] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.570125] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.596463] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.622801] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.649139] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.675477] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.701815] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.728153] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.754492] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.780830] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.807168] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.833506] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.859844] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.886182] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.912524] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.938863] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.965202] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 24.991540] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.017876] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.044212] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.070549] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.096886] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.123225] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.149563] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.175901] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.202240] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.228578] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.254916] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.281255] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 25.281299] stereo mode not supported [ 25.281300] stereo mode not supported [ 25.281301] stereo mode not supported [ 25.281302] stereo mode not supported [ 25.281316] [drm:drm_mode_debug_printmodeline], Modeline 31:"1152x864" 0 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 25.281320] [drm:drm_mode_prune_invalid], Not using 1152x864 mode 15 [ 25.281323] [drm:drm_mode_debug_printmodeline], Modeline 20:"2232x1255" 0 481917 2232 2416 2664 3096 1255 1256 1259 1342 0x0 0x6 [ 25.281327] [drm:drm_mode_prune_invalid], Not using 2232x1255 mode 15 [ 25.281331] [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [ 25.281333] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 25.281336] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 86 44900 1024 1032 1208 1264 768 768 776 817 0x40 0x15 [ 25.281340] [drm:drm_mode_debug_printmodeline], Modeline 28:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 25.281344] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 25.281347] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 25.281350] [drm:drm_mode_debug_printmodeline], Modeline 21:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 25.281354] [drm:drm_mode_debug_printmodeline], Modeline 22:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 25.281357] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 25.281361] [drm:drm_mode_debug_printmodeline], Modeline 24:"720x400" 88 35500 720 738 846 900 400 421 423 449 0x40 0xa [ 25.281364] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 25.281376] [drm:drm_mode_getconnector], connector id 7: [ 25.287707] [drm:drm_mode_getconnector], connector id 10: [ 25.287713] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 25.292309] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 25.292313] [drm:drm_mode_getconnector], connector id 10: [ 25.292315] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 25.296904] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 25.296909] [drm:drm_mode_getconnector], connector id 12: [ 25.296911] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 25.301501] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 25.301504] [drm:drm_mode_getconnector], connector id 12: [ 25.301506] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 25.306095] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 25.306099] [drm:drm_mode_getconnector], connector id 14: [ 25.306101] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 25.308627] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 25.308630] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 25.308632] [drm:drm_mode_getconnector], connector id 14: [ 25.308634] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 25.311159] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 25.311162] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 25.311165] [drm:drm_mode_getconnector], connector id 16: [ 25.311167] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 25.313693] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 25.313697] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 25.313701] [drm:drm_mode_getconnector], connector id 16: [ 25.313705] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 25.316232] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [ 25.316234] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 25.382417] [drm:drm_crtc_helper_set_config], [ 25.382419] [drm:drm_crtc_helper_set_config], crtc: c282e000 3 fb: c27d14bc connectors: f7749f00 num_connectors: 0 (x, y) (0, 0) [ 25.382427] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 25.382445] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 25.382449] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 25.382451] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 25.383066] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 25.383068] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 25.383070] [drm:ironlake_crtc_dpms], crtc 1 is disabled [ 25.383684] [drm:drm_crtc_helper_set_config], [ 25.383686] [drm:drm_crtc_helper_set_config], crtc: c282d000 4 fb: c27d14bc connectors: f7749f10 num_connectors: 0 (x, y) (0, 0) [ 25.383690] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 25.383705] [drm:ironlake_crtc_dpms], crtc 0 dpms off [ 25.383707] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 0 [ 25.383709] [drm:ironlake_crtc_dpms], crtc 0 is disabled [ 25.384324] [drm:ironlake_crtc_dpms], crtc 1 dpms off [ 25.384325] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 25.384328] [drm:ironlake_crtc_dpms], crtc 1 is disabled
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 9 lines · Zhenyu Wang
Quoted 5 lines · Zhenyu Wang
sorry, this is still broken on the 16x9 panel.
'
intel_dp_link_required' is 107840*18/8 = 242640, 'intel_dp_max_data_rate' is 270000*1*8/10 = 216000. So it will fail in both check.Dave, here's dmesg in working (upstream) and your patch applied cases. Sorry, this panel does have EDID but is invalid.
That's not "has invalid EDID", that's "really doesn't have EDID at all". Might be DisplayID! Any chance you can try a patch like this and give me the dmesg? It'll still look like an EDID failure but it should be something more interesting than cc cc cc cc ...
drivers/gpu/drm/drm_edid.c +1 -1
@@ -201,7 +201,7 @@ bool drm_edid_is_valid(struct edid *edid) }EXPORT_SYMBOL (drm_edid_is_valid); -#define DDC_ADDR 0x50 +#define DDC_ADDR 0x52#define DDC_SEGMENT_ADDR 0x30/** * Get EDID information via I2C.
- ajax
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines · Adam Jackson
Quoted 4 lines · Zhenyu Wang
Quoted 3 lines · Zhenyu Wang
sorry, this is still broken on the 16x9 panel.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
'
intel_dp_link_required' is 107840*18/8 = 242640, 'intel_dp_max_data_rate' is 270000*1*8/10 = 216000. So it will fail in both check.Dave, here's dmesg in working (upstream) and your patch applied cases. Sorry, this panel does have EDID but is invalid.
That's not "has invalid EDID", that's "really doesn't have EDID at all". Might be DisplayID!
yeah, no idea what it really is.
Quoted 3 lines
Any chance you can try a patch like this and give
me the dmesg? It'll still look like an EDID failure but it should be something more interesting than cc cc cc cc ...
sure, will run this when I have access to the machine the next day. the failure dmesg just showed the 1600x900 modeline is wrongly pruned.
Quoted 16 lines
drivers/gpu/drm/drm_edid.c +1
-2@@ -201,7 +201,7 @@ bool drm_edid_is_valid(struct edid *edid) }EXPORT_SYMBOL (drm_edid_is_valid); -#define DDC_ADDR 0x50 +#define DDC_ADDR 0x52#define DDC_SEGMENT_ADDR 0x30/** * Get EDID information via I2C. -ajax
Signature · 3 lines
Open Source Technology Center, Intel ltd. $gpg --keyserver wwwkeys.pgp.net --recv-keys 4D781827
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx