Skip to contentSkip to conversation

added initial support for TPO TD043MTEA1 LCD display on Aspenite

PATCH Applied Mark F. Brown 3 participants 6 messages Aug 26, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v3 cover added initial support for TPO TD043MTEA1 LCD display on Aspenite

Mark F. Brown (2):
pxa168: added framebuffer support code.
pxa168: added initial support for TPO TD043MTEA1 LCD display on
Aspenite

 arch/arm/mach-mmp/aspenite.c            |   60 +++++++++++++++++++++++++++++++
 arch/arm/mach-mmp/include/mach/pxa168.h |    8 ++++
 arch/arm/mach-mmp/pxa168.c              |    3 ++
 3 files changed, 71 insertions(+), 0 deletions(-)
#1 lore raw

PATCH v3 1/2 pxa168: added framebuffer support code.

---
 arch/arm/mach-mmp/include/mach/pxa168.h |    8 ++++++++
 arch/arm/mach-mmp/pxa168.c              |    3 +++
 2 files changed, 11 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/include/mach/pxa168.h +8 -0
index 27e1bc7..220738f 100644
@@ -10,6 +10,7 @@ extern void __init pxa168_init_irq(void);
 #include <mach/devices.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
+#include <video/pxa168fb.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -25,6 +26,7 @@ extern struct pxa_device_desc pxa168_device_ssp3;
 extern struct pxa_device_desc pxa168_device_ssp4;
 extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
+extern struct pxa_device_desc pxa168_device_fb;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -97,4 +99,10 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 {
 	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
 }
+
+static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
+{
+	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
+}
+
 #endif /* __ASM_MACH_PXA168_H */
arch/arm/mach-mmp/pxa168.c +3 -0
index 652ae66..eaebf66 100644
@@ -79,6 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
@@ -96,6 +97,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -147,3 +149,4 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
 PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
+PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
Signature · 1 line
1.7.0.4
Applied
#2 lore raw

Re: [PATCH v3 1/2] pxa168: added framebuffer support code.

Quoted 1 line · Mark F. Brown

Applied to 'devel'.

Quoted 65 lines

---
?arch/arm/mach-mmp/include/mach/pxa168.h | ? ?8 ++++++++ ?arch/arm/mach-mmp/pxa168.c ? ? ? ? ? ? ?| ? ?3 +++ ?2 files changed, 11 insertions(+), 0 deletions(-)

arch/arm/mach-mmp/include/mach/pxa168.h +0 -0
index 27e1bc7..220738f 100644
@@ -10,6 +10,7 @@ extern void __init pxa168_init_irq(void);

?#include <mach/devices.h>
?#include <plat/i2c.h>
?#include <plat/pxa3xx_nand.h>
+#include <video/pxa168fb.h>

?extern struct pxa_device_desc pxa168_device_uart1; ?extern struct pxa_device_desc pxa168_device_uart2;

arch/arm/mach-mmp/include/mach/pxa168.h +7 -0
@@ -25,6 +26,7 @@ extern struct pxa_device_desc pxa168_device_ssp3;
 ?extern struct pxa_device_desc pxa168_device_ssp4;
 ?extern struct pxa_device_desc pxa168_device_ssp5;
 ?extern struct pxa_device_desc pxa168_device_nand;
+extern struct pxa_device_desc pxa168_device_fb;
 
 ?static inline int pxa168_add_uart(int id)
 ?{
@@ -97,4 +99,10 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 ?{
 ? ? ? ?return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
 ?}
+
+static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
+{
+ ? ? ? return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
+}
+

?#endif /* __ASM_MACH_PXA168_H */

arch/arm/mach-mmp/pxa168.c +1 -0
index 652ae66..eaebf66 100644
@@ -79,6 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 ?static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 
 ?static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 

?/* device and clock bindings */
?static struct clk_lookup pxa168_clkregs[] = {

arch/arm/mach-mmp/pxa168.c +2 -1
@@ -96,6 +97,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 ? ? ? ?INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
 ? ? ? ?INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 ? ? ? ?INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ ? ? ? INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
 ?};
 
 ?static int __init pxa168_init(void)
@@ -147,3 +149,4 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
 ?PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 ?PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 ?PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
+PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
--

1.7.0.4

#3 lore raw

PATCH v3 2/2 pxa168: added initial support for TPO TD043MTEA1 LCD display on Aspenite

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/aspenite.c |   60 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 60 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/aspenite.c +60 -0
index 0629394..9e1bd6b 100644
@@ -23,6 +23,7 @@
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
 #include <mach/gpio.h>
+#include <video/pxa168fb.h>
 
 #include "common.h"
 
@@ -66,6 +67,36 @@ static unsigned long common_pin_config[] __initdata = {
 	GPIO115_I2S_BCLK,
 	GPIO116_I2S_RXD,
 	GPIO117_I2S_TXD,
+
+	/* LCD */
+	GPIO56_LCD_FCLK_RD,
+	GPIO57_LCD_LCLK_A0,
+	GPIO58_LCD_PCLK_WR,
+	GPIO59_LCD_DENA_BIAS,
+	GPIO60_LCD_DD0,
+	GPIO61_LCD_DD1,
+	GPIO62_LCD_DD2,
+	GPIO63_LCD_DD3,
+	GPIO64_LCD_DD4,
+	GPIO65_LCD_DD5,
+	GPIO66_LCD_DD6,
+	GPIO67_LCD_DD7,
+	GPIO68_LCD_DD8,
+	GPIO69_LCD_DD9,
+	GPIO70_LCD_DD10,
+	GPIO71_LCD_DD11,
+	GPIO72_LCD_DD12,
+	GPIO73_LCD_DD13,
+	GPIO74_LCD_DD14,
+	GPIO75_LCD_DD15,
+	GPIO76_LCD_DD16,
+	GPIO77_LCD_DD17,
+	GPIO78_LCD_DD18,
+	GPIO79_LCD_DD19,
+	GPIO80_LCD_DD20,
+	GPIO81_LCD_DD21,
+	GPIO82_LCD_DD22,
+	GPIO83_LCD_DD23,
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -134,6 +165,34 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = {
 	{ I2C_BOARD_INFO("wm8753", 0x1b), },
 };
 
+static struct fb_videomode video_modes[] = {
+	[0] = {
+		.pixclock	= 30120,
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.hsync_len	= 1,
+		.left_margin	= 215,
+		.right_margin	= 40,
+		.vsync_len	= 1,
+		.upper_margin	= 34,
+		.lower_margin	= 10,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+	},
+};
+
+struct pxa168fb_mach_info aspenite_lcd_info = {
+	.id			= "Graphic Frame",
+	.modes			= video_modes,
+	.num_modes		= ARRAY_SIZE(video_modes),
+	.pix_fmt		= PIX_FMT_RGB565,
+	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
+	.dumb_mode		= DUMB_MODE_RGB888,
+	.active			= 1,
+	.panel_rbswap		= 0,
+	.invert_pixclock	= 0,
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -143,6 +202,7 @@ static void __init common_init(void)
 	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
 	pxa168_add_ssp(1);
 	pxa168_add_nand(&aspenite_nand_info);
+	pxa168_add_fb(&aspenite_lcd_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
Signature · 1 line
1.7.0.4
Applied
#4 lore raw

Re: [PATCH v3 2/2] pxa168: added initial support for TPO TD043MTEA1 LCD display on Aspenite

Quoted 1 line · Mark F. Brown

Applied to 'devel'.

Quoted 100 lines

---
?arch/arm/mach-mmp/aspenite.c | ? 60 ++++++++++++++++++++++++++++++++++++++++++ ?1 files changed, 60 insertions(+), 0 deletions(-)

arch/arm/mach-mmp/aspenite.c +0 -0
index 0629394..9e1bd6b 100644
@@ -23,6 +23,7 @@

?#include <mach/mfp-pxa168.h>
?#include <mach/pxa168.h>
?#include <mach/gpio.h>
+#include <video/pxa168fb.h>

?#include "common.h"

arch/arm/mach-mmp/aspenite.c +59 -0
@@ -66,6 +67,36 @@ static unsigned long common_pin_config[] __initdata = {
 ? ? ? ?GPIO115_I2S_BCLK,
 ? ? ? ?GPIO116_I2S_RXD,
 ? ? ? ?GPIO117_I2S_TXD,
+
+ ? ? ? /* LCD */
+ ? ? ? GPIO56_LCD_FCLK_RD,
+ ? ? ? GPIO57_LCD_LCLK_A0,
+ ? ? ? GPIO58_LCD_PCLK_WR,
+ ? ? ? GPIO59_LCD_DENA_BIAS,
+ ? ? ? GPIO60_LCD_DD0,
+ ? ? ? GPIO61_LCD_DD1,
+ ? ? ? GPIO62_LCD_DD2,
+ ? ? ? GPIO63_LCD_DD3,
+ ? ? ? GPIO64_LCD_DD4,
+ ? ? ? GPIO65_LCD_DD5,
+ ? ? ? GPIO66_LCD_DD6,
+ ? ? ? GPIO67_LCD_DD7,
+ ? ? ? GPIO68_LCD_DD8,
+ ? ? ? GPIO69_LCD_DD9,
+ ? ? ? GPIO70_LCD_DD10,
+ ? ? ? GPIO71_LCD_DD11,
+ ? ? ? GPIO72_LCD_DD12,
+ ? ? ? GPIO73_LCD_DD13,
+ ? ? ? GPIO74_LCD_DD14,
+ ? ? ? GPIO75_LCD_DD15,
+ ? ? ? GPIO76_LCD_DD16,
+ ? ? ? GPIO77_LCD_DD17,
+ ? ? ? GPIO78_LCD_DD18,
+ ? ? ? GPIO79_LCD_DD19,
+ ? ? ? GPIO80_LCD_DD20,
+ ? ? ? GPIO81_LCD_DD21,
+ ? ? ? GPIO82_LCD_DD22,
+ ? ? ? GPIO83_LCD_DD23,
 ?};
 
 ?static struct smc91x_platdata smc91x_info = {
@@ -134,6 +165,34 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = {
 ? ? ? ?{ I2C_BOARD_INFO("wm8753", 0x1b), },
 ?};
 
+static struct fb_videomode video_modes[] = {
+ ? ? ? [0] = {
+ ? ? ? ? ? ? ? .pixclock ? ? ? = 30120,
+ ? ? ? ? ? ? ? .refresh ? ? ? ?= 60,
+ ? ? ? ? ? ? ? .xres ? ? ? ? ? = 800,
+ ? ? ? ? ? ? ? .yres ? ? ? ? ? = 480,
+ ? ? ? ? ? ? ? .hsync_len ? ? ?= 1,
+ ? ? ? ? ? ? ? .left_margin ? ?= 215,
+ ? ? ? ? ? ? ? .right_margin ? = 40,
+ ? ? ? ? ? ? ? .vsync_len ? ? ?= 1,
+ ? ? ? ? ? ? ? .upper_margin ? = 34,
+ ? ? ? ? ? ? ? .lower_margin ? = 10,
+ ? ? ? ? ? ? ? .sync ? ? ? ? ? = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+ ? ? ? },
+};
+
+struct pxa168fb_mach_info aspenite_lcd_info = {
+ ? ? ? .id ? ? ? ? ? ? ? ? ? ? = "Graphic Frame",
+ ? ? ? .modes ? ? ? ? ? ? ? ? ?= video_modes,
+ ? ? ? .num_modes ? ? ? ? ? ? ?= ARRAY_SIZE(video_modes),
+ ? ? ? .pix_fmt ? ? ? ? ? ? ? ?= PIX_FMT_RGB565,
+ ? ? ? .io_pin_allocation_mode = PIN_MODE_DUMB_24,
+ ? ? ? .dumb_mode ? ? ? ? ? ? ?= DUMB_MODE_RGB888,
+ ? ? ? .active ? ? ? ? ? ? ? ? = 1,
+ ? ? ? .panel_rbswap ? ? ? ? ? = 0,
+ ? ? ? .invert_pixclock ? ? ? ?= 0,
+};
+
 ?static void __init common_init(void)
 ?{
 ? ? ? ?mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -143,6 +202,7 @@ static void __init common_init(void)
 ? ? ? ?pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
 ? ? ? ?pxa168_add_ssp(1);
 ? ? ? ?pxa168_add_nand(&aspenite_nand_info);
+ ? ? ? pxa168_add_fb(&aspenite_lcd_info);
 

? ? ? ?/* off-chip devices */
? ? ? ?platform_device_register(&smc91x_device);
--
1.7.0.4

#5 lore raw
In reply to Mark F. Brown

Dne ?t 26. srpna 2010 05:51:53 Mark F. Brown napsal(a):

Quoted 10 lines

Mark F. Brown (2):
pxa168: added framebuffer support code.
pxa168: added initial support for TPO TD043MTEA1 LCD display on
Aspenite

 arch/arm/mach-mmp/aspenite.c            |   60
+++++++++++++++++++++++++++++++ arch/arm/mach-mmp/include/mach/pxa168.h | 
  8 ++++
 arch/arm/mach-mmp/pxa168.c              |    3 ++
 3 files changed, 71 insertions(+), 0 deletions(-)

It looks good to me, but the hardware specific goo is up to Haojian/Eric to check.

Cheers