added initial support for TPO TD043MTEA1 LCD display on Aspenite
Subsystems (3)
v3 cover added initial support for TPO TD043MTEA1 LCD display on Aspenite
Mark F. Brown (2):
pxa168: added framebuffer support code.
pxa168: added initial support for TPO TD043MTEA1 LCD display on
Aspenite
arch/arm/mach-mmp/aspenite.c | 60 +++++++++++++++++++++++++++++++ arch/arm/mach-mmp/include/mach/pxa168.h | 8 ++++ arch/arm/mach-mmp/pxa168.c | 3 ++ 3 files changed, 71 insertions(+), 0 deletions(-)
PATCH v3 1/2 pxa168: added framebuffer support code.
--- arch/arm/mach-mmp/include/mach/pxa168.h | 8 ++++++++ arch/arm/mach-mmp/pxa168.c | 3 +++ 2 files changed, 11 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/include/mach/pxa168.h +8 -0
@@ -10,6 +10,7 @@ extern void __init pxa168_init_irq(void);#include <mach/devices.h> #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> +#include <video/pxa168fb.h> extern struct pxa_device_desc pxa168_device_uart1;extern struct pxa_device_desc pxa168_device_uart2;
@@ -25,6 +26,7 @@ extern struct pxa_device_desc pxa168_device_ssp3;extern struct pxa_device_desc pxa168_device_ssp4;extern struct pxa_device_desc pxa168_device_ssp5;extern struct pxa_device_desc pxa168_device_nand; +extern struct pxa_device_desc pxa168_device_fb;static inline int pxa168_add_uart (int id) {
@@ -97,4 +99,10 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) {return pxa_register_device (&pxa168_device_nand, info,sizeof (*info)); } + +static inline int pxa168_add_fb (struct pxa168fb_mach_info *mi) +{ +return pxa_register_device (&pxa168_device_fb, mi,sizeof (*mi)); +} +#endif /* __ASM_MACH_PXA168_H */
arch/arm/mach-mmp/pxa168.c +3 -0
@@ -79,6 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(lcd, LCD, 0x7f, 312000000);/* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = {
@@ -96,6 +97,7 @@ static struct clk_lookup pxa168_clkregs[] = {INIT_CLKREG (&clk_ssp4,"pxa168-ssp.3" ,NULL ),INIT_CLKREG (&clk_ssp5,"pxa168-ssp.4" ,NULL ),INIT_CLKREG (&clk_nand,"pxa3xx-nand" ,NULL ), + INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), };static int __init pxa168_init (void )
@@ -147,3 +149,4 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);PXA168_DEVICE (ssp3,"pxa168-ssp" ,2 ,SSP3 ,0xd401f000 ,0x40 ,56 ,57 );PXA168_DEVICE (ssp4,"pxa168-ssp" ,3 ,SSP4 ,0xd4020000 ,0x40 ,58 ,59 );PXA168_DEVICE (ssp5,"pxa168-ssp" ,4 ,SSP5 ,0xd4021000 ,0x40 ,60 ,61 ); +PXA168_DEVICE (fb,"pxa168-fb" ,-1 ,LCD ,0xd420b000 ,0x1c8 );
Signature · 1 line
1.7.0.4
Eric Miao
AppliedRe: [PATCH v3 1/2] pxa168: added framebuffer support code.
Quoted 1 line · Mark F. Brown
Signed-off-by Mark F. Brown <[email protected]>
Applied to 'devel'.
Quoted 65 lines
---
?arch/arm/mach-mmp/include/mach/pxa168.h | ? ?8 ++++++++ ?arch/arm/mach-mmp/pxa168.c ? ? ? ? ? ? ?| ? ?3 +++ ?2 files changed, 11 insertions(+), 0 deletions(-)arch/arm/mach-mmp/include/mach/pxa168.h +0
-0@@ -10,6 +10,7 @@ extern void __init pxa168_init_irq(void);?#include <
mach/devices.h>
?#include <plat/i2c.h>
?#include <plat/pxa3xx_nand.h>
+#include <video/pxa168fb.h>?extern struct
pxa_device_descpxa168_device_uart1; ?extern structpxa_device_descpxa168_device_uart2;arch/arm/mach-mmp/include/mach/pxa168.h +7
-0@@ -25,6 +26,7 @@ extern struct pxa_device_desc pxa168_device_ssp3; ?extern struct pxa_device_desc pxa168_device_ssp4; ?extern struct pxa_device_desc pxa168_device_ssp5; ?extern struct pxa_device_desc pxa168_device_nand; +extern struct pxa_device_desc pxa168_device_fb; ?static inline int pxa168_add_uart(int id) ?{@@ -97,4 +99,10 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) ?{ ? ? ? ?return pxa_register_device(&pxa168_device_nand, info, sizeof(*info)); ?} + +static inline int pxa168_add_fb (struct pxa168fb_mach_info *mi) +{ + ? ? ? return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi)); +} +?#endif /*
__ASM_MACH_PXA168_H*/arch/arm/mach-mmp/pxa168.c +1
-0@@ -79,6 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); ?static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); ?static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(lcd, LCD, 0x7f, 312000000);?/* device and clock bindings */
?static structclk_lookuppxa168_clkregs[] = {arch/arm/mach-mmp/pxa168.c +2
-1@@ -96,6 +97,7 @@ static struct clk_lookup pxa168_clkregs[] = { ? ? ? ?INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), ? ? ? ?INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), ? ? ? ?INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + ? ? ? INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), ?}; ?static int __init pxa168_init(void)@@ -147,3 +149,4 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); ?PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); ?PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); ?PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); +PXA168_DEVICE (fb,"pxa168-fb" ,-1 ,LCD ,0xd420b000 ,0x1c8 ); --1.7.0.4
PATCH v3 2/2 pxa168: added initial support for TPO TD043MTEA1 LCD display on Aspenite
In reply to Mark F. Brown--- arch/arm/mach-mmp/aspenite.c | 60 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 60 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/aspenite.c +60 -0
@@ -23,6 +23,7 @@#include <mach/mfp-pxa168.h> #include <mach/pxa168.h> #include <mach/gpio.h> +#include <video/pxa168fb.h> #include "common.h"
@@ -66,6 +67,36 @@ static unsigned long common_pin_config[] __initdata = {GPIO115_I2S_BCLK ,GPIO116_I2S_RXD ,GPIO117_I2S_TXD , + +/* LCD */ +GPIO56_LCD_FCLK_RD , +GPIO57_LCD_LCLK_A0 , +GPIO58_LCD_PCLK_WR , +GPIO59_LCD_DENA_BIAS , +GPIO60_LCD_DD0 , +GPIO61_LCD_DD1 , +GPIO62_LCD_DD2 , +GPIO63_LCD_DD3 , +GPIO64_LCD_DD4 , +GPIO65_LCD_DD5 , +GPIO66_LCD_DD6 , +GPIO67_LCD_DD7 , +GPIO68_LCD_DD8 , +GPIO69_LCD_DD9 , +GPIO70_LCD_DD10 , +GPIO71_LCD_DD11 , +GPIO72_LCD_DD12 , +GPIO73_LCD_DD13 , +GPIO74_LCD_DD14 , +GPIO75_LCD_DD15 , +GPIO76_LCD_DD16 , +GPIO77_LCD_DD17 , +GPIO78_LCD_DD18 , +GPIO79_LCD_DD19 , +GPIO80_LCD_DD20 , +GPIO81_LCD_DD21 , +GPIO82_LCD_DD22 , + GPIO83_LCD_DD23, }; static struct smc91x_platdata smc91x_info = {
@@ -134,6 +165,34 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = { { I2C_BOARD_INFO("wm8753", 0x1b), }, }; +static struct fb_videomode video_modes[] = { + [0 ] = { + .pixclock =30120 , + .refresh =60 , + .xres =800 , + .yres =480 , + .hsync_len =1 , + .left_margin =215 , + .right_margin =40 , + .vsync_len =1 , + .upper_margin =34 , + .lower_margin =10 , + .sync =FB_SYNC_VERT_HIGH_ACT |FB_SYNC_HOR_HIGH_ACT , + }, +}; + +struct pxa168fb_mach_info aspenite_lcd_info = { + .id ="Graphic Frame" , + .modes = video_modes, + .num_modes =ARRAY_SIZE (video_modes), + .pix_fmt =PIX_FMT_RGB565 , + .io_pin_allocation_mode =PIN_MODE_DUMB_24 , + .dumb_mode =DUMB_MODE_RGB888 , + .active =1 , + .panel_rbswap =0 , + .invert_pixclock =0 , +}; +static void __init common_init (void ) {mfp_config (ARRAY_AND_SIZE (common_pin_config));
@@ -143,6 +202,7 @@ static void __init common_init(void)pxa168_add_twsi (1 ,NULL ,ARRAY_AND_SIZE (aspenite_i2c_info));pxa168_add_ssp (1 );pxa168_add_nand (&aspenite_nand_info); +pxa168_add_fb (&aspenite_lcd_info);/* off-chip devices */ platform_device_register (&smc91x_device);
Signature · 1 line
1.7.0.4
Eric Miao
AppliedRe: [PATCH v3 2/2] pxa168: added initial support for TPO TD043MTEA1 LCD display on Aspenite
Quoted 1 line · Mark F. Brown
Signed-off-by Mark F. Brown <[email protected]>
Applied to 'devel'.
Quoted 100 lines
---
?arch/arm/mach-mmp/aspenite.c | ? 60 ++++++++++++++++++++++++++++++++++++++++++ ?1 files changed, 60 insertions(+), 0 deletions(-)arch/arm/mach-mmp/aspenite.c +0
-0@@ -23,6 +23,7 @@?#include <
mach/mfp-pxa168.h>
?#include <mach/pxa168.h>
?#include <mach/gpio.h>
+#include <video/pxa168fb.h>?#include "
common.h"arch/arm/mach-mmp/aspenite.c +59
-0@@ -66,6 +67,36 @@ static unsigned long common_pin_config[] __initdata = { ? ? ? ?GPIO115_I2S_BCLK, ? ? ? ?GPIO116_I2S_RXD, ? ? ? ?GPIO117_I2S_TXD, + + ? ? ? /* LCD */ + ? ? ? GPIO56_LCD_FCLK_RD, + ? ? ? GPIO57_LCD_LCLK_A0, + ? ? ? GPIO58_LCD_PCLK_WR, + ? ? ? GPIO59_LCD_DENA_BIAS, + ? ? ? GPIO60_LCD_DD0, + ? ? ? GPIO61_LCD_DD1, + ? ? ? GPIO62_LCD_DD2, + ? ? ? GPIO63_LCD_DD3, + ? ? ? GPIO64_LCD_DD4, + ? ? ? GPIO65_LCD_DD5, + ? ? ? GPIO66_LCD_DD6, + ? ? ? GPIO67_LCD_DD7, + ? ? ? GPIO68_LCD_DD8, + ? ? ? GPIO69_LCD_DD9, + ? ? ? GPIO70_LCD_DD10, + ? ? ? GPIO71_LCD_DD11, + ? ? ? GPIO72_LCD_DD12, + ? ? ? GPIO73_LCD_DD13, + ? ? ? GPIO74_LCD_DD14, + ? ? ? GPIO75_LCD_DD15, + ? ? ? GPIO76_LCD_DD16, + ? ? ? GPIO77_LCD_DD17, + ? ? ? GPIO78_LCD_DD18, + ? ? ? GPIO79_LCD_DD19, + ? ? ? GPIO80_LCD_DD20, + ? ? ? GPIO81_LCD_DD21, + ? ? ? GPIO82_LCD_DD22, + ? ? ? GPIO83_LCD_DD23, ?}; ?static struct smc91x_platdata smc91x_info = {@@ -134,6 +165,34 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = { ? ? ? ?{ I2C_BOARD_INFO("wm8753", 0x1b), }, ?}; +static struct fb_videomode video_modes[] = { + ? ? ? [0] = { + ? ? ? ? ? ? ? .pixclock ? ? ? = 30120, + ? ? ? ? ? ? ? .refresh ? ? ? ?= 60, + ? ? ? ? ? ? ? .xres ? ? ? ? ? = 800, + ? ? ? ? ? ? ? .yres ? ? ? ? ? = 480, + ? ? ? ? ? ? ? .hsync_len ? ? ?= 1, + ? ? ? ? ? ? ? .left_margin ? ?= 215, + ? ? ? ? ? ? ? .right_margin ? = 40, + ? ? ? ? ? ? ? .vsync_len ? ? ?= 1, + ? ? ? ? ? ? ? .upper_margin ? = 34, + ? ? ? ? ? ? ? .lower_margin ? = 10, + ? ? ? ? ? ? ? .sync ? ? ? ? ? = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + ? ? ? }, +}; + +struct pxa168fb_mach_info aspenite_lcd_info = { + ? ? ? .id ? ? ? ? ? ? ? ? ? ? = "Graphic Frame", + ? ? ? .modes ? ? ? ? ? ? ? ? ?= video_modes, + ? ? ? .num_modes ? ? ? ? ? ? ?= ARRAY_SIZE(video_modes), + ? ? ? .pix_fmt ? ? ? ? ? ? ? ?= PIX_FMT_RGB565, + ? ? ? .io_pin_allocation_mode = PIN_MODE_DUMB_24, + ? ? ? .dumb_mode ? ? ? ? ? ? ?= DUMB_MODE_RGB888, + ? ? ? .active ? ? ? ? ? ? ? ? = 1, + ? ? ? .panel_rbswap ? ? ? ? ? = 0, + ? ? ? .invert_pixclock ? ? ? ?= 0, +}; + ?static void __init common_init(void) ?{ ? ? ? ?mfp_config(ARRAY_AND_SIZE(common_pin_config));@@ -143,6 +202,7 @@ static void __init common_init(void) ? ? ? ?pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info)); ? ? ? ?pxa168_add_ssp(1); ? ? ? ?pxa168_add_nand(&aspenite_nand_info); + ? ? ? pxa168_add_fb(&aspenite_lcd_info);? ? ? ?/* off-chip devices */
? ? ? ?platform_device_register(&smc91x_device);
--
1.7.0.4
Dne ?t 26. srpna 2010 05:51:53 Mark F. Brown napsal(a):
Quoted 10 lines
Mark F. Brown (2):
pxa168: added framebuffer support code.
pxa168: added initial support for TPO TD043MTEA1 LCD display on
Aspenitearch/arm/mach-mmp/aspenite.c | 60 +++++++++++++++++++++++++++++++ arch/arm/mach-mmp/include/mach/pxa168.h | 8 ++++ arch/arm/mach-mmp/pxa168.c | 3 ++ 3 files changed, 71 insertions(+), 0 deletions(-)
It looks good to me, but the hardware specific goo is up to Haojian/Eric to check.
Cheers