ipheth: remove incorrect devtype to WWAN
Subsystems (3)
PATCH 1/1 ipheth: remove incorrect devtype to WWAN
The 'wwan' devtype is meant for devices that require preconfiguration and *every* time setup before the ethernet interface can be used, like cellular modems which require a series of setup commands on serial ports or other mechanisms before the ethernet interface will handle packets.
As ipheth only requires one-per-hotplug pairing setup with no preconfiguration (like APN, phone #, etc) and the network interface is usable at any time after that initial setup, remove the incorrect devtype wwan.
---
drivers/net/usb/ipheth.c +0 -3
@@ -424,10 +424,6 @@ static const struct net_device_ops ipheth_netdev_ops = { .ndo_get_stats = &ipheth_stats, }; -static struct device_type ipheth_type = { - .name ="wwan" , -};
A message that is not in the archive (sent off-list or not yet received): [email protected]
From: Dan Williams <[email protected]>
Date: Wed, 08 Sep 2010 12:50:47 -0500
Quoted 11 lines
The 'wwan' devtype is meant for devices that require preconfiguration and *every* time setup before the ethernet interface can be used, like cellular modems which require a series of setup commands on serial ports or other mechanisms before the ethernet interface will handle packets.
As ipheth only requires one-per-hotplug pairing setup with no preconfiguration (like APN, phone #, etc) and the network interface is usable at any time after that initial setup, remove the incorrect devtype wwan.
Signed-off-by Dan Williams <[email protected]>
Applied, thanks Dan.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html