ppc4xx: Add CATCenter IoCon 405EP board support
PATCH 1/1 ppc4xx: Add CATCenter IoCon 405EP board support
Board support for the Guntermann & Drunck IoCon.
--- MAINTAINERS | 1 + MAKEALL | 1 + board/gdsys/iocon/Makefile | 51 +++++++ board/gdsys/iocon/config.mk | 24 ++++ board/gdsys/iocon/iocon.c | 302 +++++++++++++++++++++++++++++++++++++++++++ board/gdsys/iocon/osd.c | 255 ++++++++++++++++++++++++++++++++++++ board/gdsys/iocon/osd.h | 29 ++++ boards.cfg | 1 + include/configs/iocon.h | 242 ++++++++++++++++++++++++++++++++++ 9 files changed, 906 insertions(+), 0 deletions(-) create mode 100644 board/gdsys/iocon/Makefile create mode 100644 board/gdsys/iocon/config.mk create mode 100644 board/gdsys/iocon/iocon.c create mode 100644 board/gdsys/iocon/osd.c create mode 100644 board/gdsys/iocon/osd.h create mode 100644 include/configs/iocon.h
MAINTAINERS +1 -0
@@ -145,6 +145,7 @@ Dirk Eibach <[email protected]> dlvision PPC405EP gdppc440etx PPC440EP/GR intip PPC460EX + iocon PPC405EP neo PPC405EP Dave Ellis <[email protected]>
MAKEALL +1 -0
@@ -157,6 +157,7 @@ LIST_4xx="$(boards_by_cpu ppc4xx) hcu4 \ hcu5 \ intip \ + iocon \ kilauea \ kilauea_nand \ mcu25 \
board/gdsys/iocon/Makefile new file +51 -0
51 lines not on this page · raw message
board/gdsys/iocon/config.mk new file +24 -0
@@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000
board/gdsys/iocon/iocon.c new file +302 -0
302 lines not on this page · raw message
board/gdsys/iocon/osd.c new file +255 -0
255 lines not on this page · raw message
board/gdsys/iocon/osd.h new file +29 -0
@@ -0,0 +1,29 @@ +/* +* (C) Copyright 2010 +* Dirk Eibach, Guntermann & Drunck GmbH, eibach at gdsys.de +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef _OSD_H_ +#define _OSD_H_ + +int osd_probe (void ); + +#endif
boards.cfg +1 -0
@@ -358,6 +358,7 @@ pcs440ep powerpc ppc4xx quad100hd powerpc ppc4xx dlvision powerpc ppc4xx - gdsys gdppc440etx powerpc ppc4xx - gdsys +iocon powerpc ppc4xx - gdsys CPCIISER4 powerpc ppc4xx cpciiser4 esd DASA_SIM powerpc ppc4xx dasa_sim esd PMC405DE powerpc ppc4xx pmc405de esd
include/configs/iocon.h new file +242 -0
242 lines not on this page · raw message
Signature · 1 line
1.5.6.5
PATCH 1/1 ppc4xx: Add CATCenter IoCon 405EP board support
Dear Dirk Eibach,
Quoted 12 lines · In message <[email protected]> you wrote:
Board support for the Guntermann & Drunck IoCon.
Signed-off-by Dirk Eibach <[email protected]>--- MAINTAINERS | 1 + MAKEALL | 1 + board/gdsys/iocon/Makefile | 51 +++++++ board/gdsys/iocon/config.mk | 24 ++++ board/gdsys/iocon/iocon.c | 302 +++++++++++++++++++++++++++++++++++++++++++ board/gdsys/iocon/osd.c | 255 ++++++++++++++++++++++++++++++++++++ board/gdsys/iocon/osd.h | 29 ++++ boards.cfg | 1 +
Quoted 8 lines
include/configs/iocon.h | 242 ++++++++++++++++++++++++++++++++++ 9 files changed, 906 insertions(+), 0 deletions(-) create mode 100644 board/gdsys/iocon/Makefile create mode 100644 board/gdsys/iocon/config.mk create mode 100644 board/gdsys/iocon/iocon.c create mode 100644 board/gdsys/iocon/osd.c create mode 100644 board/gdsys/iocon/osd.h create mode 100644 include/configs/iocon.h
Which patch version is this nw? What has been changed?
Please see
http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Gravitation cannot be held responsible for people falling in love." - Albert Einstein
Eibach
PATCH 1/1 ppc4xx: Add CATCenter IoCon 405EP board support
Dear Wolfgang,
Quoted 18 lines
Signed-off-by Dirk Eibach <[email protected]>Quoted 6 lines
--- MAINTAINERS | 1 + MAKEALL | 1 + board/gdsys/iocon/Makefile | 51 +++++++ board/gdsys/iocon/config.mk | 24 ++++ board/gdsys/iocon/iocon.c | 302+++++++++++++++++++++++++++++++++++++++++++
Quoted 1 line
board/gdsys/iocon/osd.c | 255++++++++++++++++++++++++++++++++++++
Quoted 3 lines
board/gdsys/iocon/osd.h | 29 ++++ boards.cfg | 1 + include/configs/iocon.h | 242++++++++++++++++++++++++++++++++++
Quoted 4 lines
9 files changed, 906 insertions(+), 0 deletions(-) create mode100644 board/gdsys/iocon/Makefile create mode 100644
board/gdsys/iocon/config.mkcreate mode 100644board/gdsys/iocon/iocon.ccreate mode 100644
Quoted 5 lines
board/gdsys/iocon/osd.cQuoted 2 lines
create mode 100644
board/gdsys/iocon/osd.hcreate mode 100644include/configs/iocon.hWhich patch version is this nw? What has been changed?
It's the first version of this patch, so the header should be allright :p
Cheers
Dirk
--------------------------------------------------------------------------
Guntermann & Drunck GmbH Systementwicklung
Dortmunder Str. 4a
D-57234 Wilnsdorf - Germany
Tel: +49 (0) 27 39 / 89 01 - 100 Fax: +49 (0) 27 39 / 89 01 - 120
E-Mail: mailto:sales at gdsys.de Web: www.gdsys.de
--------------------------------------------------------------------------
Geschaeftsfuehrer:
Udo Guntermann - Martin Drunck - Reiner Ruelmann - Klaus Tocke HRB 2884, Amtsgericht Siegen - WEEE-Reg.-Nr. DE30763240 USt.-Id.-Nr. DE 126575222 - Steuer-Nr. 342 / 5835 / 1041
--------------------------------------------------------------------------
DQS-zertifiziert nach ISO 9001:2000
--------------------------------------------------------------------------
PATCH 1/1 ppc4xx: Add CATCenter IoCon 405EP board support
Dear "Eibach, Dirk",
Quoted 5 lines · In message <[email protected]> you wrote:
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) ---SG_MailGateway:=gJA5JiKFGK1gbc86QTKjeFZk9I
Content-Type: application/pgp-encryptedVersion: 1
Please do not send encrypted messages to the mailing list.
Please send plain text only.
Message unreadable, ignored. Sorry.
PATCH 1/1 ppc4xx: Add CATCenter IoCon 405EP board support
In reply to Dirk EibachDear Dirk Eibach,
Quoted 12 lines · In message <[email protected]> you wrote:
Board support for the Guntermann & Drunck IoCon.
Signed-off-by Dirk Eibach <[email protected]>--- MAINTAINERS | 1 + MAKEALL | 1 + board/gdsys/iocon/Makefile | 51 +++++++ board/gdsys/iocon/config.mk | 24 ++++ board/gdsys/iocon/iocon.c | 302 +++++++++++++++++++++++++++++++++++++++++++ board/gdsys/iocon/osd.c | 255 ++++++++++++++++++++++++++++++++++++ board/gdsys/iocon/osd.h | 29 ++++ boards.cfg | 1 +
Quoted 8 lines
include/configs/iocon.h | 242 ++++++++++++++++++++++++++++++++++ 9 files changed, 906 insertions(+), 0 deletions(-) create mode 100644 board/gdsys/iocon/Makefile create mode 100644 board/gdsys/iocon/config.mk create mode 100644 board/gdsys/iocon/iocon.c create mode 100644 board/gdsys/iocon/osd.c create mode 100644 board/gdsys/iocon/osd.h create mode 100644 include/configs/iocon.h
It seems thius board is very similar to the "io" board; especially board/gdsys/iocon/{io,iocon}.c and include/configs/{ip,iocon}.h share many, many identical lines.
Please factor out such common code. Eventually, a single board entry with two configurations is sufficient?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Make it right before you make it faster.
Eibach
PATCH 1/1 ppc4xx: Add CATCenter IoCon 405EP board support
Quoted 4 lines
It seems thius board is very similar to the "io" board; especially
board/gdsys/iocon/{io,iocon}.candinclude/configs/{ip,iocon}.hshare many, many identical lines.
PATCH 1/1 ppc4xx: Add CATCenter IoCon 405EP board support
Dear "Eibach, Dirk",
Quoted 5 lines · In message <[email protected]> you wrote:
Quoted 3 lines
Please factor out such common code. Eventually, a single board entry with two configurations is sufficient?
Nice idea. Is there a way to do this with boards.cfg?
Yes. See the proposed changes in the "Makefile-cleanup" branch of the u-boot-testing repo; see for example this version of boards.cfg which passes in boards.cfg all options that used to go through the top level Makefile:
For example, see the CATcenter entries in lines 639 ff.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is better to marry than to burn.
- Bible ``I Corinthians'' ch. 7, v. 9