Drivers: char: ip2: Makefile: replace the use of <module>-objs with <module>-y
Subsystems (2)
PATCH 1/5 Drivers: char: ip2: Makefile: replace the use of <module>-objs with <module>-y
Changed <module>-objs to <module>-y in Makefile.
--- drivers/char/ip2/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/ip2/Makefile +1 -1
@@ -4,5 +4,5 @@ obj-$(CONFIG_COMPUTONE) += ip2.o -ip2-objs := ip2main.o +ip2-y := ip2main.o
Signature · 1 line
1.7.3.1.104.gc752e
PATCH 2/5 Drivers: char: impi: Makefile: replace the use of <module>-objs with <module>-y
Changed <module>-objs to <module>-y in Makefile.
--- drivers/char/ipmi/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/ipmi/Makefile +1 -1
@@ -2,7 +2,7 @@ # Makefile for the ipmi drivers. # -ipmi_si-objs := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o +ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
Signature · 1 line
1.7.3.1.104.gc752e
Re: [PATCH 02/05] Drivers: char: impi: Makefile: replace the use of <module>-objs with <module>-y
Quoted 12 lines · Tracey Dent
Changed <module>-objs to <module>-y in
Makefile.Signed-off-by Tracey Dent <[email protected]>--- drivers/char/ipmi/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/char/ipmi/Makefile +0
-0
drivers/char/ipmi/Makefile line 5
Quoted 5 lines
drivers/char/ipmi/Makefile +1
-1@@ -2,7 +2,7 @@ # Makefile for the ipmi drivers. # -ipmi_si-objs := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o +ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o
NACK (and all of these). This will try to build 4 modules instead of one. Read Documentation/kbuild/makefiles.txt
regards,
Signature · 1 line
js
Re: [PATCH 02/05] Drivers: char: impi: Makefile: replace the use of <module>-objs with <module>-y
Quoted 16 lines · Jiri Slaby
Quoted 15 lines · Tracey Dent
Changed <module>-objs to <module>-y in
Makefile.Signed-off-by Tracey Dent <[email protected]>--- drivers/char/ipmi/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/char/ipmi/Makefile +0
-0@@ -2,7 +2,7 @@ # Makefile for the ipmi drivers. #
Quoted 5 lines
drivers/char/ipmi/Makefile line 5
Quoted 2 lines
drivers/char/ipmi/Makefile +1
-1-ipmi_si-objs := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o +ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.oNACK (and all of these). This will try to build 4 modules instead of one. Read
Documentation/kbuild/makefiles.txt
Please disregard my NACK, I misread the patch.
regards,
Signature · 1 line
js
Re: [PATCH 02/05] Drivers: char: impi: Makefile: replace the use of <module>-objs with <module>-y
Quoted 17 lines · Jiri Slaby
Quoted 16 lines · Jiri Slaby
Quoted 15 lines · Tracey Dent
Changed <module>-objs to <module>-y in
Makefile.Signed-off-by Tracey Dent <[email protected]>--- drivers/char/ipmi/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/char/ipmi/Makefile +0
-0@@ -2,7 +2,7 @@ # Makefile for the ipmi drivers. #
Quoted 8 lines
Quoted 5 lines
drivers/char/ipmi/Makefile line 5
Quoted 2 lines
drivers/char/ipmi/Makefile +1
-1-ipmi_si-objs := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o +ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.oNACK (and all of these). This will try to build 4 modules instead of one. Read
Documentation/kbuild/makefiles.txtPlease disregard my NACK, I misread the patch.
Okay, no problem. So instead of getting your NACK does it get a ACK by you?
Quoted 4 lines
regards,
--
js
Thanks,
Tracey D
PATCH 3/5 Drivers: Char: mwave: Makefile: Makefile clean up
In reply to Tracey DentChanged <module>-objs to <module>-y in Makefile and use ccflags-y option.
--- drivers/char/mwave/Makefile | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/char/mwave/Makefile +2 -2
@@ -6,10 +6,10 @@ obj-$(CONFIG_MWAVE) += mwave.o -mwave-objs := mwavedd.o smapi.o tp3780i.o 3780i.o +mwave-y := mwavedd.o smapi.o tp3780i.o 3780i.o # To have the mwave driver disable other uarts if necessary # EXTRA_CFLAGS += -DMWAVE_FUTZ_WITH_OTHER_DEVICES # To compile in lots (~20 KiB) of run-time enablable printk()s for debugging: -EXTRA_CFLAGS += -DMW_TRACE +ccflags-y := -DMW_TRACE
Signature · 1 line
1.7.3.1.104.gc752e
PATCH 4/5 Drivers: char: pcmcia: ipwireless: Makefile: replace the use of <module>-objs with <module>-y
In reply to Tracey DentChanged <module>-objs to <module>-y in Makefile.
--- drivers/char/pcmcia/ipwireless/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/pcmcia/ipwireless/Makefile +1 -1
@@ -6,5 +6,5 @@ obj-$(CONFIG_IPWIRELESS) += ipwireless.o -ipwireless-objs := hardware.o main.o network.o tty.o +ipwireless-y := hardware.o main.o network.o tty.o
Signature · 1 line
1.7.3.1.104.gc752e
PATCH 5/5 Drivers: char: rio: Makefile: replace the use of <module>-objs with <module>-y
In reply to Tracey DentChanged <module>-objs to <module>-y in Makefile.
--- drivers/char/rio/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/rio/Makefile +1 -1
@@ -8,5 +8,5 @@ obj-$(CONFIG_RIO) += rio.o -rio-objs := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \ +rio-y := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \ rioparam.o rioroute.o riotable.o riotty.o
Signature · 1 line
1.7.3.1.104.gc752e