Add Marvell New Soc Support ARMADA100
Subsystems (2)
cover Add Marvell New Soc Support ARMADA100
This patch series adds basic ARMADA100 support, with minimal drivers (UART, MFP) support and Aspenite-DB board support for simple boot
Prafulla WADASKAR (3):
arm: Add Support for Marvell ARMADA 100 Familiy SoCs.
Serial: Add UART support for Marvell ARMADA 100 SoCs.
Armada100: Add Board Support for Marvell Aspenite-DB
Prafulla Wadaskar (2):
gpio: Add Multu-Function-Pin configuration driver for Marvell SoCs add mfp configuration support for ARMADA100
MAINTAINERS | 1 + MAKEALL | 1 + arch/arm/cpu/arm926ejs/armada100/Makefile | 46 +++++ arch/arm/cpu/arm926ejs/armada100/cpu.c | 92 ++++++++++ arch/arm/cpu/arm926ejs/armada100/dram.c | 122 +++++++++++++ arch/arm/cpu/arm926ejs/armada100/timer.c | 199 +++++++++++++++++++++ arch/arm/include/asm/arch-armada100/armada100.h | 120 +++++++++++++ arch/arm/include/asm/arch-armada100/cpu.h | 53 ++++++ arch/arm/include/asm/arch-armada100/mfp.h | 218 +++++++++++++++++++++++ board/Marvell/aspenite/Makefile | 52 ++++++ board/Marvell/aspenite/aspenite.c | 53 ++++++ board/Marvell/aspenite/config.mk | 26 +++ boards.cfg | 1 + drivers/gpio/Makefile | 1 + drivers/gpio/mfp.c | 105 +++++++++++ drivers/serial/ns16550.c | 16 ++ drivers/serial/serial.c | 3 + include/configs/aspenite.h | 133 ++++++++++++++ include/mfp.h | 97 ++++++++++ 19 files changed, 1339 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/armada100/Makefile create mode 100644 arch/arm/cpu/arm926ejs/armada100/cpu.c create mode 100644 arch/arm/cpu/arm926ejs/armada100/dram.c create mode 100644 arch/arm/cpu/arm926ejs/armada100/timer.c create mode 100644 arch/arm/include/asm/arch-armada100/armada100.h create mode 100644 arch/arm/include/asm/arch-armada100/cpu.h create mode 100755 arch/arm/include/asm/arch-armada100/mfp.h create mode 100644 board/Marvell/aspenite/Makefile create mode 100644 board/Marvell/aspenite/aspenite.c create mode 100644 board/Marvell/aspenite/config.mk create mode 100644 drivers/gpio/mfp.c create mode 100644 include/configs/aspenite.h create mode 100644 include/mfp.h
Signature · 1 line
1.7.2.1
PATCH 1/5 arm: Add Support for Marvell ARMADA 100 Familiy SoCs.
From: Prafulla WADASKAR <[email protected]>
ARMADA 100 Family processors are highly integrated SoCs based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref: http://www.marvell.com/products/processors/applications/armada_100
SoC versions Supported:
1) ARMADA168/88AP168 (Aspen P)
2) ARMADA166/88AP166 (Aspen M)
3) ARMADA162/88AP162 (Aspen L)
Contributors:
Eric Miao <[email protected]>
Lei Wen <[email protected]>
Mahavir Jain <[email protected]>
--- arch/arm/cpu/arm926ejs/armada100/Makefile | 46 ++++++ arch/arm/cpu/arm926ejs/armada100/cpu.c | 92 +++++++++++ arch/arm/cpu/arm926ejs/armada100/dram.c | 122 ++++++++++++++ arch/arm/cpu/arm926ejs/armada100/timer.c | 199 +++++++++++++++++++++++ arch/arm/include/asm/arch-armada100/armada100.h | 120 ++++++++++++++ arch/arm/include/asm/arch-armada100/cpu.h | 53 ++++++ 6 files changed, 632 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/armada100/Makefile create mode 100644 arch/arm/cpu/arm926ejs/armada100/cpu.c create mode 100644 arch/arm/cpu/arm926ejs/armada100/dram.c create mode 100644 arch/arm/cpu/arm926ejs/armada100/timer.c create mode 100644 arch/arm/include/asm/arch-armada100/armada100.h create mode 100644 arch/arm/include/asm/arch-armada100/cpu.h
arch/arm/cpu/arm926ejs/armada100/Makefile new file +46 -0
@@ -0,0 +1,46 @@ +# +# (C) Copyright 2010 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS-y = cpu.o timer.o dram.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
arch/arm/cpu/arm926ejs/armada100/cpu.c new file +92 -0
92 lines not on this page · raw message
arch/arm/cpu/arm926ejs/armada100/dram.c new file +122 -0
122 lines not on this page · raw message
arch/arm/cpu/arm926ejs/armada100/timer.c new file +199 -0
199 lines not on this page · raw message
arch/arm/include/asm/arch-armada100/armada100.h new file +120 -0
120 lines not on this page · raw message
arch/arm/include/asm/arch-armada100/cpu.h new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
1.7.2.1
PATCH 2/5 Serial: Add UART support for Marvell ARMADA 100 SoCs.
From: Prafulla WADASKAR <[email protected]>
ARMADA 100 SoCs has NS16550 compatible UART peripheral This patch enables the same for ARMADA100 platforms
--- drivers/serial/ns16550.c | 16 ++++++++++++++++ drivers/serial/serial.c | 3 +++ 2 files changed, 19 insertions(+), 0 deletions(-)
drivers/serial/ns16550.c +16 -0
@@ -26,7 +26,15 @@void NS16550_init (NS16550_t com_port,int baud_divisor) { +#ifdef CONFIG_ARMADA100 +/* +* For ARMADA 100 Based Processors bit 6 in IER register +* represents UART Unit Enable bit. +*/ +serial_out ((1 <<6 ), &com_port->ier); +#else serial_out (0x00 , &com_port->ier); +#endif #if defined(CONFIG_OMAP ) && !defined(CONFIG_OMAP3_ZOOM2 )serial_out (0x7 , &com_port->mdr1);/* mode select reset TL16C750*/ #endif
@@ -52,7 +60,15 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)#ifndef CONFIG_NS16550_MIN_FUNCTIONS void NS16550_reinit (NS16550_t com_port,int baud_divisor) { +#ifdef CONFIG_ARMADA100 +/* +* For ARMADA 100 Based Processors bit 6 in IER register +* represents UART Unit Enable bit. +*/ +serial_out ((1 <<6 ), &com_port->ier); +#else serial_out (0x00 , &com_port->ier); +#endif serial_out (UART_LCR_BKSE |UART_LCRVAL , &com_port->lcr);serial_out (0 , &com_port->dll);serial_out (0 , &com_port->dlm);
drivers/serial/serial.c +3 -0
@@ -33,6 +33,9 @@#ifdef CONFIG_ORION5X #include <asm/arch/orion5x.h> #endif +#ifdef CONFIG_ARMADA100 +#include <asm/arch/armada100.h> +#endif #if defined (CONFIG_SERIAL_MULTI )#include <serial.h>
Signature · 1 line
1.7.2.1
PATCH 2/5 Serial: Add UART support for Marvell ARMADA 100 SoCs.
Hi Prafulla,
Quoted 17 lines · On Wednesday 27 October 2010 15:53:21 Prafulla Wadaskar wrote:
ARMADA 100 SoCs has NS16550 compatible UART peripheral This patch enables the same for ARMADA100 platforms
Signed-off-by Mahavir Jain <[email protected]>Signed-off-by Prafulla WADASKAR <[email protected]>--- drivers/serial/ns16550.c | 16 ++++++++++++++++ drivers/serial/serial.c | 3 +++ 2 files changed, 19 insertions(+), 0 deletions(-)drivers/serial/ns16550.c +0
-0@@ -26,7 +26,15 @@void NS16550_init (NS16550_t com_port,int baud_divisor)
drivers/serial/ns16550.c line 37
Quoted 10 lines
drivers/serial/ns16550.c +8
-0{ +#ifdef CONFIG_ARMADA100 +/* +* For ARMADA 100 Based Processors bit 6 in IER register +* represents UART Unit Enable bit. +*/ +serial_out ((1 <<6 ), &com_port->ier); +#else serial_out (0x00 , &com_port->ier); +#endif
These board/platform specific driver additions are really ugly. A better way to do this would be something like this:
Add this to your board/platform header:
#define CONFIG_SYS_NS16550_IER (1 << 6)
And then to ns16550.c or even ns16550.h:
#ifndef CONFIG_SYS_NS16550_IER
#define CONFIG_SYS_NS16550_IER 0x00
#endif
This macro can now be used unconditionally when initializing this "ier" register:
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
PATCH 2/5 Serial: Add UART support for Marvell ARMADA 100 SoCs.
Quoted 51 lines
-----Original Message-----
From: Stefan Roese [mailto:sr at denx.de]
Sent: Wednesday, October 27, 2010 3:24 PM
To: u-boot at lists.denx.de; Prabhanjan Sarnaik
Cc: Prafulla Wadaskar; Manas Saksena; Lei Wen; Eric Miao
Subject: Re: [U-Boot] [PATCH 2/5] Serial: Add UART support for Marvell ARMADA 100 SoCs.Hi Prafulla,
Quoted 17 lines · On Wednesday 27 October 2010 15:53:21 Prafulla Wadaskar wrote:
ARMADA 100 SoCs has NS16550 compatible UART peripheral This patch enables the same for ARMADA100 platforms
Signed-off-by Mahavir Jain <[email protected]>Signed-off-by Prafulla WADASKAR <[email protected]>--- drivers/serial/ns16550.c | 16 ++++++++++++++++ drivers/serial/serial.c | 3 +++ 2 files changed, 19 insertions(+), 0 deletions(-)drivers/serial/ns16550.c +0
-0@@ -26,7 +26,15 @@void NS16550_init (NS16550_t com_port,int baud_divisor)drivers/serial/ns16550.c line 37
Quoted 10 lines
drivers/serial/ns16550.c +8
-0{ +#ifdef CONFIG_ARMADA100 +/* +* For ARMADA 100 Based Processors bit 6 in IER register +* represents UART Unit Enable bit. +*/ +serial_out ((1 <<6 ), &com_port->ier); +#else serial_out (0x00 , &com_port->ier); +#endif These board/platform specific driver additions are really ugly. A better way
to do this would be something like this:Add this to your board/platform header:
#define
CONFIG_SYS_NS16550_IER(1 << 6)And then to
ns16550.cor evenns16550.h:
Quoted 8 lines
#ifndef
CONFIG_SYS_NS16550_IER
#defineCONFIG_SYS_NS16550_IER0x00
#endifThis macro can now be used unconditionally when initializing this "ier" register:
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
Thanks...
I will do it for next version post.
Regards..
Prafulla . .
PATCH 3/5 gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs
In reply to Prafulla WadaskarMost of the Marvell SoCs has Multi Function Pin (MFP) configuration registers For ex. ARMADA100.
These registers are programmed to expose the specific functionality associated with respective SoC Pins
This driver provides configuration APIs,
using them, configuration need to be done in board specific code
for ex- following code configures MFPs 107 and 108 for UART_TX/RX functionality
int board_early_init_f(void)
{
u32 mfp_cfg[] = {
/* Console on UART1 */
MFP107_UART1_RXD,
MFP108_UART1_TXD,
MFP_EOC /*End of configureation*/
};
/* configure MFP's */
mfp_config(mfp_cfg);
return 0;
}--- drivers/gpio/Makefile | 1 + drivers/gpio/mfp.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++ include/mfp.h | 97 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 203 insertions(+), 0 deletions(-) create mode 100644 drivers/gpio/mfp.c create mode 100644 include/mfp.h
drivers/gpio/Makefile +1 -0
@@ -27,6 +27,7 @@ LIB := $(obj)libgpio.a COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o +COBJS-$(CONFIG_MFP) += mfp.o COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o COBJS-$(CONFIG_PCA953X) += pca953x.o COBJS-$(CONFIG_S5P) += s5p_gpio.o
drivers/gpio/mfp.c new file +105 -0
105 lines not on this page · raw message
include/mfp.h new file +97 -0
97 lines not on this page · raw message
Signature · 1 line
1.7.2.1
PATCH 4/5 add Multi Fnction Pin configuration support for ARMADA100
This patch adds the support MFP support for Marvell ARMADA100 SoCs
--- arch/arm/include/asm/arch-armada100/mfp.h | 218 +++++++++++++++++++++++++++++ 1 files changed, 218 insertions(+), 0 deletions(-) create mode 100755 arch/arm/include/asm/arch-armada100/mfp.h
arch/arm/include/asm/arch-armada100/mfp.h new file +218 -0
@@ -0,0 +1,218 @@ +/* +* Based on linux/arch/arm/mach-mpp/include/mfp-pxa168.h +* (C) Copyright 2007 +* Marvell Semiconductor <www.marvell.com> +* 2007-08-21: eric miao <[email protected]> +* +* (C) Copyright 2010 +* Marvell Semiconductor <www.marvell.com> +* Written-by: Prafulla Wadaskar <[email protected]> +* Contributor: Mahavir Jain <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301 USA +*/ + +#ifndef __ARMADA100_MFP_H +#define __ARMADA100_MFP_H + +/* By default Pin Drive is set to medium */ +#define MFPD (x) MFP(x) | MFP_DRIVE(MEDIUM) + +/* GPIOs */ +#define GPIOAF (x) (if (x <= 15) ? 5 : \ + if (x == 16) ? 0 : \ + if (x == 17) ? 5 : \ + if (x == 18) ? 0 : \ + if (x == 19) ? 5 : \ + if (x == 20) ? 0 : \ + if (x <= 25) ? 5 : \ + if (x == 26) ? 0 : \ + if (x == 33) ? 5 : 0) + +#define MFP_GPIO (x) MFPD(x) | MFP_AF(GPIOAF(x)) + +/* UART2 */ +#define MFP47_UART2_RXD MFPD(47) | MFP_AF(6) +#define MFP48_UART2_TXD MFPD(48) | MFP_AF(6) +#define MFP88_UART2_RXD MFPD(88) | MFP_AF(2) +#define MFP89_UART2_TXD MFPD(89) | MFP_AF(2) + +/* UART3 */ +#define GPIO8_UART3_RXD MFPD(8) | MFP_AF(2) +#define GPIO9_UART3_TXD MFPD(9) | MFP_AF(2) + +/* MFU */ +#define MFP86_TX_CLK MFPD(86) | MFP_AF(5) +#define MFP87_TX_EN MFPD(87) | MFP_AF(5) +#define MFP88_TX_DQ3 MFPD(88) | MFP_AF(5) +#define MFP89_TX_DQ2 MFPD(89) | MFP_AF(5) +#define MFP90_TX_DQ1 MFPD(90) | MFP_AF(5) +#define MFP91_TX_DQ0 MFPD(91) | MFP_AF(5) +#define MFP92_MII_CRS MFPD(92) | MFP_AF(5) +#define MFP93_MII_COL MFPD(93) | MFP_AF(5) +#define MFP94_RX_CLK MFPD(94) | MFP_AF(5) +#define MFP95_RX_ER MFPD(95) | MFP_AF(5) +#define MFP96_RX_DQ3 MFPD(96) | MFP_AF(5) +#define MFP97_RX_DQ2 MFPD(97) | MFP_AF(5) +#define MFP98_RX_DQ1 MFPD(98) | MFP_AF(5) +#define MFP99_RX_DQ0 MFPD(99) | MFP_AF(5) +#define MFP100_MII_MDC MFPD(100) | MFP_AF(5) +#define MFP101_MII_MDIO MFPD(101) | MFP_AF(5) +#define MFP103_RX_DV MFPD(103) | MFP_AF(5) + +/* SSP2*/ +#define MFP107_SPI_NOR_RXD MFPD(107) | MFP_AF(4) +#define MFP108_SPI_NOR_TXD MFPD(108) | MFP_AF(4) +#define MFP109_SPI_NOR_SYSCLK MFPD(109) | MFP_AF(4) +#define MFP111_SPI_NOR_CLK MFPD(111) | MFP_AF(4) + +/* DFI */ +#define MFP0_DFI_D15 MFPD(0) | MFP_AF(0) +#define MFP1_DFI_D14 MFPD(1) | MFP_AF(0) +#define MFP2_DFI_D13 MFPD(2) | MFP_AF(0) +#define MFP3_DFI_D12 MFPD(3) | MFP_AF(0) +#define MFP4_DFI_D11 MFPD(4) | MFP_AF(0) +#define MFP5_DFI_D10 MFPD(5) | MFP_AF(0) +#define MFP6_DFI_D9 MFPD(6) | MFP_AF(0) +#define MFP7_DFI_D8 MFPD(7) | MFP_AF(0) +#define MFP8_DFI_D7 MFPD(8) | MFP_AF(0) +#define MFP9_DFI_D6 MFPD(9) | MFP_AF(0) +#define MFP10_DFI_D5 MFPD(10) | MFP_AF(0) +#define MFP11_DFI_D4 MFPD(11) | MFP_AF(0) +#define MFP12_DFI_D3 MFPD(12) | MFP_AF(0) +#define MFP13_DFI_D2 MFPD(13) | MFP_AF(0) +#define MFP14_DFI_D1 MFPD(14) | MFP_AF(0) +#define MFP15_DFI_D0 MFPD(15) | MFP_AF(0) + +#define MFP30_DFI_ADDR0 MFPD(30) | MFP_AF(0) +#define MFP31_DFI_ADDR1 MFPD(31) | MFP_AF(0) +#define MFP32_DFI_ADDR2 MFPD(32) | MFP_AF(0) +#define MFP33_DFI_ADDR3 MFPD(33) | MFP_AF(0) + +/* NAND */ +#define MFP16_ND_nCS0 MFPD(16) | MFP_AF(1) +#define MFP17_ND_nWE MFPD(17) | MFP_AF(0) +#define MFP21_ND_ALE MFPD(21) | MFP_AF(0) +#define MFP22_ND_CLE MFPD(22) | MFP_AF(0) +#define MFP24_ND_nRE MFPD(24) | MFP_AF(0) +#define MFP26_ND_RnB1 MFPD(26) | MFP_AF(1) +#define MFP27_ND_RnB2 MFPD(27) | MFP_AF(1) + +/* Static Memory Controller */ +#define MFP18_SMC_nCS0 MFPD(18) | MFP_AF(3) +#define MFP18_SMC_nCS1 MFPD(18) | MFP_AF(2) +#define MFP16_SMC_nCS0 MFPD(16) | MFP_AF(2) +#define MFP16_SMC_nCS1 MFPD(16) | MFP_AF(3) +#define MFP19_SMC_nCS0 MFPD(19) | MFP_AF(0) +#define MFP20_SMC_nCS1 MFPD(20) | MFP_AF(2) +#define MFP23_SMC_nLUA MFPD(23) | MFP_AF(0) +#define MFP25_SMC_nLLA MFPD(25) | MFP_AF(0) +#define MFP27_SMC_IRQ MFPD(27) | MFP_AF(0) +#define MFP28_SMC_RDY MFPD(28) | MFP_AF(0) +#define MFP29_SMC_SCLK MFPD(29) | MFP_AF(0) +#define MFP34_SMC_nCS1 MFPD(34) | MFP_AF(2) +#define MFP35_SMC_BE1 MFPD(35) | MFP_AF(2) +#define MFP36_SMC_BE2 MFPD(36) | MFP_AF(2) + +/* Compact Flash */ +#define MFP19_CF_nCE1 MFPD(19) | MFP_AF(3) +#define MFP20_CF_nCE2 MFPD(20) | MFP_AF(3) +#define MFP23_CF_nALE MFPD(23) | MFP_AF(3) +#define MFP25_CF_nRESET MFPD(25) | MFP_AF(3) +#define MFP28_CF_RDY MFPD(28) | MFP_AF(3) +#define MFP29_CF_STSCH MFPD(29) | MFP_AF(3) +#define MFP30_CF_nREG MFPD(30) | MFP_AF(3) +#define MFP31_CF_nIOIS16 MFPD(31) | MFP_AF(3) +#define MFP32_CF_nCD1 MFPD(32) | MFP_AF(3) +#define MFP33_CF_nCD2 MFPD(33) | MFP_AF(3) + +/* UART1 */ +#define MFP107_UART1_TXD MFP(107) | MFP_AF(1) | MFP_DRIVE(FAST) +#define MFP107_UART1_RXD MFP(107) | MFP_AF(2) | MFP_DRIVE(FAST) +#define MFP108_UART1_RXD MFP(108) | MFP_AF(1) | MFP_DRIVE(FAST) +#define MFP108_UART1_TXD MFP(108) | MFP_AF(2) | MFP_DRIVE(FAST) +#define MFP109_UART1_CTS MFPD(109) | MFP_AF(1) +#define MFP109_UART1_RTS MFPD(109) | MFP_AF(2) +#define MFP110_UART1_RTS MFPD(110) | MFP_AF(1) +#define MFP110_UART1_CTS MFPD(110) | MFP_AF(2) +#define MFP111_UART1_RI MFPD(111) | MFP_AF(1) +#define MFP111_UART1_DSR MFPD(111) | MFP_AF(2) +#define MFP112_UART1_DTR MFPD(111) | MFP_AF(1) +#define MFP112_UART1_DCD MFPD(112) | MFP_AF(2) + +/* MMC1 */ +#define MFP37_MMC1_DAT7 MFPD(37) | MFP_AF(1) +#define MFP38_MMC1_DAT6 MFPD(38) | MFP_AF(1) +#define MFP54_MMC1_DAT5 MFPD(54) | MFP_AF(1) +#define MFP48_MMC1_DAT4 MFPD(48) | MFP_AF(1) +#define MFP51_MMC1_DAT3 MFPD(51) | MFP_AF(1) +#define MFP52_MMC1_DAT2 MFPD(52) | MFP_AF(1) +#define MFP40_MMC1_DAT1 MFPD(40) | MFP_AF(1) +#define MFP41_MMC1_DAT0 MFPD(41) | MFP_AF(1) +#define MFP49_MMC1_CMD MFPD(49) | MFP_AF(1) +#define MFP43_MMC1_CLK MFPD(43) | MFP_AF(1) +#define MFP53_MMC1_CD MFPD(53) | MFP_AF(1) +#define MFP46_MMC1_WP MFPD(46) | MFP_AF(1) + +/* LCD */ +#define MFP84_LCD_CS MFPD(84) | MFP_AF(1) +#define MFP60_LCD_DD0 MFPD(60) | MFP_AF(1) +#define MFP61_LCD_DD1 MFPD(61) | MFP_AF(1) +#define MFP70_LCD_DD10 MFPD(70) | MFP_AF(1) +#define MFP71_LCD_DD11 MFPD(71) | MFP_AF(1) +#define MFP72_LCD_DD12 MFPD(72) | MFP_AF(1) +#define MFP73_LCD_DD13 MFPD(73) | MFP_AF(1) +#define MFP74_LCD_DD14 MFPD(74) | MFP_AF(1) +#define MFP75_LCD_DD15 MFPD(75) | MFP_AF(1) +#define MFP76_LCD_DD16 MFPD(76) | MFP_AF(1) +#define MFP77_LCD_DD17 MFPD(77) | MFP_AF(1) +#define MFP78_LCD_DD18 MFPD(78) | MFP_AF(1) +#define MFP79_LCD_DD19 MFPD(79) | MFP_AF(1) +#define MFP62_LCD_DD2 MFPD(62) | MFP_AF(1) +#define MFP80_LCD_DD20 MFPD(80) | MFP_AF(1) +#define MFP81_LCD_DD21 MFPD(81) | MFP_AF(1) +#define MFP82_LCD_DD22 MFPD(82) | MFP_AF(1) +#define MFP83_LCD_DD23 MFPD(83) | MFP_AF(1) +#define MFP63_LCD_DD3 MFPD(63) | MFP_AF(1) +#define MFP64_LCD_DD4 MFPD(64) | MFP_AF(1) +#define MFP65_LCD_DD5 MFPD(65) | MFP_AF(1) +#define MFP66_LCD_DD6 MFPD(66) | MFP_AF(1) +#define MFP67_LCD_DD7 MFPD(67) | MFP_AF(1) +#define MFP68_LCD_DD8 MFPD(68) | MFP_AF(1) +#define MFP69_LCD_DD9 MFPD(69) | MFP_AF(1) +#define MFP59_LCD_DENA_BIAS MFPD(59) | MFP_AF(1) +#define MFP56_LCD_FCLK_RD MFPD(56) | MFP_AF(1) +#define MFP57_LCD_LCLK_A0 MFPD(57) | MFP_AF(1) +#define MFP58_LCD_PCLK_WR MFPD(58) | MFP_AF(1) +#define MFP85_LCD_VSYNC MFPD(85) | MFP_AF(1) + +/* I2C */ +#define MFP105_CI2C_SDA MFPD(105) | MFP_AF(1) +#define MFP106_CI2C_SCL MFPD(106) | MFP_AF(1) + +/* I2S */ +#define MFP113_I2S_MCLK MFPD(113), MFP_AF(6) +#define MFP114_I2S_FRM MFPD(114), MFP_AF(1) +#define MFP115_I2S_BCLK MFPD(115), MFP_AF(1) +#define MFP116_I2S_RXD MFPD(116), MFP_AF(2) +#define MFP117_I2S_TXD MFPD(117), MFP_AF(2) + +#define MFP_PIN_MAX 117 + +#endif /* __ARMADA100_MFP_H */
Signature · 1 line
1.7.2.1
PATCH 5/5 Armada100: Add Board Support for Marvell Aspenite-DB
From: Prafulla WADASKAR <[email protected]>
Aspenite is a Development Board for ASPEN/ARMADA168 (88AP168) Processor upto 1.2GHz with
* Parallel 1Gb x8 DDR2-1066 MHz
* 16 Mb x16 NOR, 4Gb x8 SLC NAND, footprint for SPI NOR
* Footprints for eMMC/eSD NAND & MMC x8 card
* 4-in-1 card reader (xD, MMC/SD/MS Pro), CF True IDE socket
* SEAF memory board, subset of PISMO2
With Peripherals:
* 4.3? WVGA 24-bit LCD
* Audio codecs (AC97 & I2S), TSI
* VGA camera
* Video in via 3 RCA jacks, and HDMI type C out
* Marvell 88W8688 802.11bg/BT module
* GPS RF IC
* Dual analog mics & speakers, headset jack, LED, ambient light sensor
* USB2.0 HS host (A), OTG (micro AB)
* FE PHY, PCIE Mini Card slot
* GPIO, GPIO expander with DIP switches for easier selection UART serial over USB, CIR
This patch adds basic board support with DRAM and UART functionality The patch is tested for boot from DRAM using XDB
--- MAINTAINERS | 1 + MAKEALL | 1 + board/Marvell/aspenite/Makefile | 52 ++++++++++++++ board/Marvell/aspenite/aspenite.c | 53 +++++++++++++++ board/Marvell/aspenite/config.mk | 26 +++++++ boards.cfg | 1 + include/configs/aspenite.h | 133 +++++++++++++++++++++++++++++++++++++ 7 files changed, 267 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/aspenite/Makefile create mode 100644 board/Marvell/aspenite/aspenite.c create mode 100644 board/Marvell/aspenite/config.mk create mode 100644 include/configs/aspenite.h
MAINTAINERS +1 -0
@@ -831,6 +831,7 @@ Matt Waddel <[email protected]> Prafulla Wadaskar <[email protected]> + aspenite ARM926EJS (ARMADA100 88AP168 SoC) mv88f6281gtw_ge ARM926EJS (Kirkwood SoC) rd6281a ARM926EJS (Kirkwood SoC) sheevaplug ARM926EJS (Kirkwood SoC)
MAKEALL +1 -0
@@ -320,6 +320,7 @@ LIST_ARM9=" \ ap926ejs \ ap946es \ ap966 \ + aspenite \ cp920t \ cp922_XA10 \ cp926ejs \
board/Marvell/aspenite/Makefile new file +52 -0
52 lines not on this page · raw message
board/Marvell/aspenite/aspenite.c new file +53 -0
53 lines not on this page · raw message
board/Marvell/aspenite/config.mk new file +26 -0
@@ -0,0 +1,26 @@ +# +# (C) Copyright 2010 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <[email protected]> +# Contributor: Mahavir Jain <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +CONFIG_SYS_TEXT_BASE = 0x0600000
boards.cfg +1 -0
@@ -373,6 +373,7 @@ davinci_sffsdr arm arm926ejs sffsdr davinci davinci davinci_sonata arm arm926ejs sonata davinci davinci da830evm arm arm926ejs da8xxevm davinci davinci da850evm arm arm926ejs da8xxevm davinci davinci +aspenite arm arm926ejs - Marvell armada100 guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood openrd_base arm arm926ejs - Marvell kirkwood
include/configs/aspenite.h new file +133 -0
133 lines not on this page · raw message
Signature · 1 line
1.7.2.1
PATCH 5/5 Armada100: Add Board Support for Marvell Aspenite-DB
Dear Prafulla Wadaskar,
In message <[email protected]> you wrote:
...
Quoted 5 lines
--- MAINTAINERS | 1 + MAKEALL | 1 + board/Marvell/aspenite/Makefile | 52 ++++++++++++++ board/Marvell/aspenite/aspenite.c | 53 +++++++++++++++
Quoted 8 lines
board/Marvell/aspenite/config.mk | 26 +++++++ boards.cfg | 1 + include/configs/aspenite.h | 133 +++++++++++++++++++++++++++++++++++++ 7 files changed, 267 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/aspenite/Makefile create mode 100644 board/Marvell/aspenite/aspenite.c create mode 100644 board/Marvell/aspenite/config.mk create mode 100644 include/configs/aspenite.h
Please don't create a config.mk file any more (move CONFIG_SYS_TEXT_BASE setting to board config file), and please also do not create an entry to MAKEALL (gets auto-generated from boards.cfg).
Thanks.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Is not that the nature of men and women -- that the pleasure is in the learning of each other? -- Natira, the High Priestess of Yonada, "For the World is Hollow and I Have Touched the Sky", stardate 5476.3.
PATCH 5/5 Armada100: Add Board Support for Marvell Aspenite-DB
Quoted 31 lines
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Wednesday, October 27, 2010 11:59 PM
To: Prafulla Wadaskar
Cc: u-boot at lists.denx.de; Manas Saksena; Lei Wen; Yu Tang; Eric Miao; Ashish Karkare; Kiran Vedere; Prabhanjan Sarnaik
Subject: Re: [U-Boot] [PATCH 5/5] Armada100: Add Board Support for Marvell Aspenite-DBDear Prafulla Wadaskar,
In message <[email protected]> you wrote:
...Quoted 8 lines
--- MAINTAINERS | 1 + MAKEALL | 1 + board/Marvell/aspenite/Makefile | 52 ++++++++++++++ board/Marvell/aspenite/aspenite.c | 53 +++++++++++++++ board/Marvell/aspenite/config.mk | 26 +++++++ boards.cfg | 1 + include/configs/aspenite.h | 133+++++++++++++++++++++++++++++++++++++
Quoted 5 lines
7 files changed, 267 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/aspenite/Makefile create mode 100644 board/Marvell/aspenite/aspenite.c create mode 100644 board/Marvell/aspenite/config.mk create mode 100644 include/configs/aspenite.h
Quoted 4 lines
Please don't create a config.mk file any more (move
CONFIG_SYS_TEXT_BASEsetting to board config file), and please also do not create an entry to MAKEALL (gets auto-generated from boards.cfg).
Hi Wolfgang
Entry in boards.cfg already done, I am sorry for config.mk, I will change it.
Thanks
Regards...
Prafulla . .
PATCH 4/5 add Multi Fnction Pin configuration support for ARMADA100
In reply to Prafulla WadaskarDear Prafulla Wadaskar,
Quoted 4 lines · In message <[email protected]> you wrote:
This patch adds the support MFP support for Marvell ARMADA100 SoCs
Signed-off-by Prafulla Wadaskar <[email protected]>---
There is a typo in the Subject: please s/Fnction/Function/
[No need to repost beause of this; this can be fixed when the patch gets comitted.]
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de My challenge to the goto-less programmer is to recode tcp_input() without any gotos ... without any loss of efficiency (there has to be a catch). - W. R. Stevens