Skip to contentSkip to conversation

OMAP: DSS2: Add new display panel

PATCH New Enric Balletbo i Serra 3 participants 6 messages Oct 28, 2010 – Nov 2, 2010 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

cover OMAP: DSS2: Add new display panel

Hi,

Next patches adds support for the two new LCD panel display used on IGEP boards.

Powertip PH480272T LCD 4.3inch (480x242) display Seiko 70WVW1TZ3 LCD 7.0inch WVGA (800x480) display

Please, consider adding in next merge window.

Cheers,

Enric Balletbo i Serra (2):
OMAP: DSS2: Add Powertip PH480272T display panel
OMAP: DSS2: Add Seiko 70WVW1TZ3 display panel

 drivers/video/omap2/displays/Kconfig               |   14 ++
 drivers/video/omap2/displays/Makefile              |    2 +
 .../omap2/displays/panel-powertip-ph480272t.c      |  155 +++++++++++++++++++
 .../video/omap2/displays/panel-seiko-70wvw1tz3.c   |  157 ++++++++++++++++++++
 4 files changed, 328 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-powertip-ph480272t.c
 create mode 100644 drivers/video/omap2/displays/panel-seiko-70wvw1tz3.c
#1 lore raw

PATCH 1/2 OMAP: DSS2: Add Powertip PH480272T display panel

From: Enric Balletbo i Serra <[email protected]>

Add new Powertip PH480242T panel, a LCD 4.3inch (480x242) display type with 24-bit RGB interface.

---
 drivers/video/omap2/displays/Kconfig               |    7 +
 drivers/video/omap2/displays/Makefile              |    1 +
 .../omap2/displays/panel-powertip-ph480272t.c      |  155 ++++++++++++++++++++
 3 files changed, 163 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-powertip-ph480272t.c
drivers/video/omap2/displays/Kconfig +7 -0
index 12327bb..c3aa478 100644
@@ -44,4 +44,11 @@ config PANEL_ACX565AKM
 	select BACKLIGHT_CLASS_DEVICE
 	help
 	  This is the LCD panel used on Nokia N900
+
+config PANEL_POWERTIP_PH480272T
+	tristate "Powertip PH480272T LCD Panel"
+	depends on OMAP2_DSS
+	select BACKLIGHT_CLASS_DEVICE
+        help
+          LCD Panel used in IGEP boards.
 endmenu
drivers/video/omap2/displays/Makefile +1 -0
index aa38609..3967dbc 100644
@@ -6,3 +6,4 @@ obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
 obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
+obj-$(CONFIG_PANEL_POWERTIP_PH480272T) += panel-powertip-ph480272t.o
drivers/video/omap2/displays/panel-powertip-ph480272t.c new file +155 -0

155 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 2/2 OMAP: DSS2: Add Seiko 70WVW1TZ3 display panel

In reply to Enric Balletbo i Serra

From: Enric Balletbo i Serra <[email protected]>

Add new Seiko 70WVW1TZ3, a LCD 7.0inch WVGA (800x480) display type with 24-bit RGB interface and Touch-Panel

---
 drivers/video/omap2/displays/Kconfig               |    7 +
 drivers/video/omap2/displays/Makefile              |    1 +
 .../video/omap2/displays/panel-seiko-70wvw1tz3.c   |  157 ++++++++++++++++++++
 3 files changed, 165 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-seiko-70wvw1tz3.c
drivers/video/omap2/displays/Kconfig +7 -0
index c3aa478..d8e580b 100644
@@ -51,4 +51,11 @@ config PANEL_POWERTIP_PH480272T
 	select BACKLIGHT_CLASS_DEVICE
         help
           LCD Panel used in IGEP boards.
+
+config PANEL_SEIKO_70WVW1TZ3
+	tristate "Seiko 70WVW1TZ3 LCD Panel"
+	depends on OMAP2_DSS
+	select BACKLIGHT_CLASS_DEVICE
+        help
+          7.0 inch LCD Panel used in IGEP boards.
 endmenu
drivers/video/omap2/displays/Makefile +1 -0
index 3967dbc..75e888e 100644
@@ -7,3 +7,4 @@ obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
 obj-$(CONFIG_PANEL_POWERTIP_PH480272T) += panel-powertip-ph480272t.o
+obj-$(CONFIG_PANEL_SEIKO_70WVW1TZ3) += panel-seiko-70wvw1tz3.o
drivers/video/omap2/displays/panel-seiko-70wvw1tz3.c new file +157 -0

157 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#3 lore raw

cover OMAP: DSS2: Add new display panel

In reply to Enric Balletbo i Serra

Hi,

Quoted 8 lines · ext Enric Balletbo i Serra

Hi,

Next patches adds support for the two new LCD panel display used on IGEP boards.

Powertip PH480272T LCD 4.3inch (480x242) display Seiko 70WVW1TZ3 LCD 7.0inch WVGA (800x480) display

Quoted 7 lines

Please, consider adding in next merge window.

Cheers,

Enric Balletbo i Serra (2):
OMAP: DSS2: Add Powertip PH480272T display panel
OMAP: DSS2: Add Seiko 70WVW1TZ3 display panel

These both are "dummy" panels, and the driver is basically a copy of the existing drivers. I don't think I will merge any more of these, sorry.

What we need is a common driver for all these dummy panels, and the driver would contain configurations for all the supported panels. The board file would pass the name of the panel used in that board to the driver, and the driver would use the configurations for that panel.

This has been discussed a few times in l-o list, but I haven't found time to implement it and nobody else has done it either.

Tomi

#4 lore raw

cover OMAP: DSS2: Add new display panel

Quoted 19 lines · Tomi Valkeinen

Hi,

Quoted 8 lines · ext Enric Balletbo i Serra

Hi,

Next patches adds support for the two new LCD panel display used on IGEP boards.

?Powertip PH480272T LCD 4.3inch (480x242) display ?Seiko 70WVW1TZ3 LCD 7.0inch WVGA (800x480) display

Quoted 7 lines

Please, consider adding in next merge window.

Cheers,

Enric Balletbo i Serra (2):
? OMAP: DSS2: Add Powertip PH480272T display panel ? OMAP: DSS2: Add Seiko 70WVW1TZ3 display panel

Quoted 8 lines

These both are "dummy" panels, and the driver is basically a copy of the existing drivers. I don't think I will merge any more of these, sorry.

What we need is a common driver for all these dummy panels, and the driver would contain configurations for all the supported panels. The board file would pass the name of the panel used in that board to the driver, and the driver would use the configurations for that panel.

It looks like that we just need one file name displays.c to do those generic things and pass the configuration from board files to this driver, such as timing or other things.

Quoted 3 lines

This has been discussed a few times in l-o list, but I haven't found time to implement it and nobody else has done it either.

I'm quite happy to do this, thanks,

Signature · 5 lines
Bryan Wu <[email protected]>
Kernel Developer ? ?+86.138-1617-6545 Mobile
Ubuntu Kernel Team
Canonical Ltd. ? ? ?www.canonical.com
Ubuntu - Linux for human beings | www.ubuntu.com
#5 lore raw

cover OMAP: DSS2: Add new display panel

Quoted 9 lines · ext Bryan Wu
Quoted 5 lines · Tomi Valkeinen

What we need is a common driver for all these dummy panels, and the driver would contain configurations for all the supported panels. The board file would pass the name of the panel used in that board to the driver, and the driver would use the configurations for that panel.

Quoted 3 lines

It looks like that we just need one file name displays.c to do those generic things and pass the configuration from board files to this driver, such as timing or other things.

Not quite. If you pass timing information from the board files then every board file has to define all the timings, even if they are using the same panel.

That's why the configs should be in the panel driver, and the board file only has to define which panel is actually connected.

Quoted 5 lines
Quoted 3 lines

This has been discussed a few times in l-o list, but I haven't found time to implement it and nobody else has done it either.

I'm quite happy to do this, thanks,

Thanks, I appreciate that.

Tomi