Skip to contentSkip to conversation

Seagate FreeAgent DockStar support

PATCH New Eric Cooper 2 participants 2 messages Nov 23, 2010 – Nov 24, 2010

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 Seagate FreeAgent DockStar support

start with sheevaplug configuration
add modifications by Alexander Holler <[email protected]>
change RAM definitions to one bank (128 MB) change ident string and prompt
define MTD partitions and default environment variables add support for LEDs

---
Changes for v2:
- rebased on master, post ARM and kirkwood relocation changes
- squashed into single commit

Changes for v3:
- moved files to board/Seagate/dockstar/ and updated copyright notices
- removed dockstar entry from MAKEALL
- moved CONFIG_SYS_TEXT_BASE from config.mk to include/configs/dockstar.h
- corrected comment in board/Seagate/dockstar/kwbimage.cfg

Changes for v4:
- moved dockstar entry in boards.cfg to conform to intended sort order (other entries to be re-ordered in a subsequent patch)

Changes for v5:
- changed environment address to 0x60000

 MAINTAINERS                         |    4 +
 board/Seagate/dockstar/Makefile     |   54 +++++++++++
 board/Seagate/dockstar/dockstar.c   |  181 +++++++++++++++++++++++++++++++++++
 board/Seagate/dockstar/dockstar.h   |   44 +++++++++
 board/Seagate/dockstar/kwbimage.cfg |  165 +++++++++++++++++++++++++++++++
 boards.cfg                          |    1 +
 include/configs/dockstar.h          |  125 ++++++++++++++++++++++++
 7 files changed, 574 insertions(+), 0 deletions(-)
 create mode 100644 board/Seagate/dockstar/Makefile
 create mode 100644 board/Seagate/dockstar/dockstar.c
 create mode 100644 board/Seagate/dockstar/dockstar.h
 create mode 100644 board/Seagate/dockstar/kwbimage.cfg
 create mode 100644 include/configs/dockstar.h
MAINTAINERS +4 -0
index 9258cb1..9bf52fa 100644
@@ -591,6 +591,10 @@ Po-Yu Chuang <[email protected]>
 
 	a320evb		FA526 (ARM920T-like) (a320 SoC)
 
+Eric Cooper <[email protected]>
+
+	dockstar	ARM926EJS (Kirkwood SoC)
+
 George G. Davis <[email protected]>
 
 	assabet		SA1100
board/Seagate/dockstar/Makefile new file +54 -0

54 lines not on this page · raw message

board/Seagate/dockstar/dockstar.c new file +181 -0

181 lines not on this page · raw message

board/Seagate/dockstar/dockstar.h new file +44 -0

44 lines not on this page · raw message

board/Seagate/dockstar/kwbimage.cfg new file +165 -0

165 lines not on this page · raw message

boards.cfg +1 -0
index 08e531e..15486de 100644
@@ -53,6 +53,7 @@ pm9261		arm	arm926ejs	-		ronetix		at91
 pm9263		arm	arm926ejs	-		ronetix		at91
 suen3		arm	arm926ejs	km_arm		keymile		kirkwood
 rd6281a		arm	arm926ejs	-		Marvell		kirkwood
+dockstar	arm	arm926ejs	-		Seagate		kirkwood
 jadecpu		arm	arm926ejs	jadecpu		syteco		mb86r0x
 mx51evk		arm	armv7		mx51evk		freescale	mx5
 vision2		arm	armv7		vision2		ttcontrol	mx5
include/configs/dockstar.h new file +125 -0

125 lines not on this page · raw message

Signature · 1 line
1.7.2.3
#1 lore raw

PATCH v5 1/1 Seagate FreeAgent DockStar support

Quoted 36 lines

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Eric Cooper
Sent: Tuesday, November 23, 2010 9:04 PM
To: u-boot at lists.denx.de
Subject: [U-Boot] [PATCH v5] Seagate FreeAgent DockStar support

start with sheevaplug configuration
add modifications by Alexander Holler <[email protected]>
change RAM definitions to one bank (128 MB) change ident string and prompt
define MTD partitions and default environment variables add support for LEDs

---
Changes for v2:
- rebased on master, post ARM and kirkwood relocation changes
- squashed into single commit

Changes for v3:
- moved files to board/Seagate/dockstar/ and updated copyright notices
- removed dockstar entry from MAKEALL
- moved CONFIG_SYS_TEXT_BASE from config.mk to
include/configs/dockstar.h
- corrected comment in board/Seagate/dockstar/kwbimage.cfg

Changes for v4:
- moved dockstar entry in boards.cfg to conform to intended sort order (other entries to be re-ordered in a subsequent patch)

Changes for v5:
- changed environment address to 0x60000

Quoted 15 lines
 MAINTAINERS                         |    4 +
 board/Seagate/dockstar/Makefile     |   54 +++++++++++
 board/Seagate/dockstar/dockstar.c   |  181
+++++++++++++++++++++++++++++++++++
 board/Seagate/dockstar/dockstar.h   |   44 +++++++++
 board/Seagate/dockstar/kwbimage.cfg |  165
+++++++++++++++++++++++++++++++
 boards.cfg                          |    1 +
 include/configs/dockstar.h          |  125 ++++++++++++++++++++++++
 7 files changed, 574 insertions(+), 0 deletions(-)
 create mode 100644 board/Seagate/dockstar/Makefile
 create mode 100644 board/Seagate/dockstar/dockstar.c
 create mode 100644 board/Seagate/dockstar/dockstar.h
 create mode 100644 board/Seagate/dockstar/kwbimage.cfg
 create mode 100644 include/configs/dockstar.h

Applied to u-boot marvell.com master branch

Regards..
Prafulla . .