Skip to contentSkip to conversation

Kernel firmware?

DISCUSSION Gary Thomas 3 participants 12 messages Jan 16, 2011 – Jan 18, 2011

lore
Share & tools
lore
#0 lore raw

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

Is there some way to enable this?

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#1 lore raw

Hi Gary,

Quoted 9 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:

   phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
   rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
   phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

Is there some way to enable this?

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

Cheers,
Joshua

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#2 lore raw
Quoted 11 lines · Joshua Lock

Hi Gary,

Quoted 8 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:

    phy1 ->  rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
    rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
    phy1 ->  rt2x00lib_request_firmware: Error - Failed to request Firmware.
Quoted 7 lines
Quoted 1 line

Is there some way to enable this?

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?

I tried to add the module I need using a .bbappend file (attached). It doesn't seem to be processed though - any ideas why?

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

#DESCRIPTION = "Firmware files for use with Linux kernel" #SECTION = "kernel"
#LICENSE = "Proprietary"

PV = "0.0+git${SRCPV}"

#
# Additional firmware modules
#

#---------------------------------------------------------------------------------------
# LinkSys
#
LICENSE_${PN}-rt73 = "Firmware:LICENCE.rtlwifi_firmware.txt" PROVIDES += "linux-firmware-rt73"

do_install_append() {
	install -d  ${D}/lib/firmware/
	# LinkSys via rt73
	install -m 0666 rt73.bin ${D}/lib/firmware
	install -m 0666 LICENCE.rtlwifi_firmware.txt ${D}/lib/firmware/
}

PACKAGES = "${PN}-rt73"
FILES_${PN}-rt73 = "/lib/firmware/rt73.bin /lib/firmware/LICENCE.rtlwifi_firmware.txt" RPROVIDES_${PN}-rt73 = "${PN}-rt73"
#---------------------------------------------------------------------------------------

#3 lore raw
Quoted 14 lines · Gary Thomas
Quoted 13 lines · Joshua Lock

Hi Gary,

Quoted 9 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:

    phy1 ->  rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
    rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
    phy1 ->  rt2x00lib_request_firmware: Error - Failed to request Firmware.

Is there some way to enable this?

Quoted 8 lines
Quoted 5 lines

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?

You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the MACHINE_EXTRA_RRECOMMENDS.

Cheers,
Joshua

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#4 lore raw
Quoted 21 lines · Joshua Lock
Quoted 20 lines · Gary Thomas
Quoted 18 lines · Joshua Lock

Hi Gary,

Quoted 9 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:

     phy1 ->   rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
     rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
     phy1 ->   rt2x00lib_request_firmware: Error - Failed to request Firmware.

Is there some way to enable this?

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

Quoted 6 lines
Quoted 2 lines

I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?

You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the MACHINE_EXTRA_RRECOMMENDS.

Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."

It's working now.

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#5 lore raw
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock

Hi Gary,

Quoted 8 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

Quoted 7 lines
Quoted 1 line

Is there some way to enable this?

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?

Quoted 8 lines
Quoted 3 lines

You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the MACHINE_EXTRA_RRECOMMENDS.

Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."

It's working now.

My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:

  root@cobra3530p60:~# opkg list-installed linux*
  root@cobra3530p60:~# opkg list linux*
  linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
   Firmware files for use with Linux kernel
  linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
   Firmware files for use with Linux kernel
  linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers
   Debugging files for linux-libc-headers
  linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers
   Development files for linux-libc-headers

To be clear, all I did was add "linux-firmware-rt73" to MACHINE_EXTRA_RRECOMMENDS in my <MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?

Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#6 lore raw
Quoted 55 lines · Gary Thomas
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock

Hi Gary,

Quoted 8 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

Quoted 7 lines
Quoted 1 line

Is there some way to enable this?

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?

Quoted 8 lines
Quoted 3 lines

You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the MACHINE_EXTRA_RRECOMMENDS.

Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."

It's working now.

My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:

root@cobra3530p60:~# opkg list-installed linux*
root@cobra3530p60:~# opkg list linux*
linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
Firmware files for use with Linux kernel
linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
Firmware files for use with Linux kernel
linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers
Debugging files for linux-libc-headers
linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers
Development files for linux-libc-headers

To be clear, all I did was add "linux-firmware-rt73" to MACHINE_EXTRA_RRECOMMENDS in my <MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?

Quoted 3 lines

Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"

I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:

[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib

ld-2.12.1.so               libattr.so.1.1.0    libgcc_s.so.1            libnss_dns-2.12.1.so    librt-2.12.1.so
ld-linux.so.3              libc-2.12.1.so      libgudev-1.0.so.0        libnss_dns.so.2         librt.so.1
libBrokenLocale-2.12.1.so  libc.so.6           libgudev-1.0.so.0.0.1    libnss_files-2.12.1.so  libudev.so.0
libBrokenLocale.so.1       libcidn-2.12.1.so   libm-2.12.1.so           libnss_files.so.2       libudev.so.0.9.3
libacl.so.1                libcidn.so.1        libm.so.6                libproc-3.2.8.so        libutil-2.12.1.so
libacl.so.1.1.0            libcrypt-2.12.1.so  libnsl-2.12.1.so         libpthread-2.12.1.so    libutil.so.1
libanl-2.12.1.so           libcrypt.so.1       libnsl.so.1              libpthread.so.0         modules
libanl.so.1                libdl-2.12.1.so     libnss_compat-2.12.1.so  libresolv-2.12.1.so     udev
libattr.so.1               libdl.so.2          libnss_compat.so.2       libresolv.so.2

Am I missing something? Should I file a bug?

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#7 lore raw
Quoted 76 lines · Gary Thomas
Quoted 55 lines · Gary Thomas
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock

Hi Gary,

Quoted 8 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

Quoted 7 lines
Quoted 1 line

Is there some way to enable this?

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?

Quoted 8 lines
Quoted 3 lines

You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the MACHINE_EXTRA_RRECOMMENDS.

Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."

It's working now.

My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:

root@cobra3530p60:~# opkg list-installed linux*
root@cobra3530p60:~# opkg list linux*
linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
Firmware files for use with Linux kernel
linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
Firmware files for use with Linux kernel
linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers
Debugging files for linux-libc-headers
linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers
Development files for linux-libc-headers

To be clear, all I did was add "linux-firmware-rt73" to MACHINE_EXTRA_RRECOMMENDS in my <MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?

Quoted 3 lines

Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"

I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:

[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib

ld-2.12.1.so               libattr.so.1.1.0    libgcc_s.so.1            libnss_dns-2.12.1.so    librt-2.12.1.so
ld-linux.so.3              libc-2.12.1.so      libgudev-1.0.so.0        libnss_dns.so.2         librt.so.1
libBrokenLocale-2.12.1.so  libc.so.6           libgudev-1.0.so.0.0.1    libnss_files-2.12.1.so  libudev.so.0
libBrokenLocale.so.1       libcidn-2.12.1.so   libm-2.12.1.so           libnss_files.so.2       libudev.so.0.9.3
libacl.so.1                libcidn.so.1        libm.so.6                libproc-3.2.8.so        libutil-2.12.1.so
libacl.so.1.1.0            libcrypt-2.12.1.so  libnsl-2.12.1.so         libpthread-2.12.1.so    libutil.so.1
libanl-2.12.1.so           libcrypt.so.1       libnsl.so.1              libpthread.so.0         modules
libanl.so.1                libdl-2.12.1.so     libnss_compat-2.12.1.so  libresolv-2.12.1.so     udev
libattr.so.1               libdl.so.2          libnss_compat.so.2       libresolv.so.2
Quoted 2 lines

Am I missing something? Should I file a bug?

Yes, please file a bug.

Cheers,
Joshua

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#8 lore raw
Quoted 77 lines · Joshua Lock
Quoted 76 lines · Gary Thomas
Quoted 55 lines · Gary Thomas
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock

Hi Gary,

Quoted 8 lines · Gary Thomas

I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

Quoted 7 lines
Quoted 1 line

Is there some way to enable this?

There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.

I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?

Quoted 8 lines
Quoted 3 lines

You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the MACHINE_EXTRA_RRECOMMENDS.

Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."

It's working now.

My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:

root@cobra3530p60:~# opkg list-installed linux*
root@cobra3530p60:~# opkg list linux*
linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
Firmware files for use with Linux kernel
linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
Firmware files for use with Linux kernel
linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers
Debugging files for linux-libc-headers
linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers
Development files for linux-libc-headers

To be clear, all I did was add "linux-firmware-rt73" to MACHINE_EXTRA_RRECOMMENDS in my<MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?

Quoted 3 lines

Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"

I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:

[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib

ld-2.12.1.so               libattr.so.1.1.0    libgcc_s.so.1            libnss_dns-2.12.1.so    librt-2.12.1.so
ld-linux.so.3              libc-2.12.1.so      libgudev-1.0.so.0        libnss_dns.so.2         librt.so.1
libBrokenLocale-2.12.1.so  libc.so.6           libgudev-1.0.so.0.0.1    libnss_files-2.12.1.so  libudev.so.0
libBrokenLocale.so.1       libcidn-2.12.1.so   libm-2.12.1.so           libnss_files.so.2       libudev.so.0.9.3
libacl.so.1                libcidn.so.1        libm.so.6                libproc-3.2.8.so        libutil-2.12.1.so
libacl.so.1.1.0            libcrypt-2.12.1.so  libnsl-2.12.1.so         libpthread-2.12.1.so    libutil.so.1
libanl-2.12.1.so           libcrypt.so.1       libnsl.so.1              libpthread.so.0         modules
libanl.so.1                libdl-2.12.1.so     libnss_compat-2.12.1.so  libresolv-2.12.1.so     udev
libattr.so.1               libdl.so.2          libnss_compat.so.2       libresolv.so.2
Quoted 4 lines
Quoted 2 lines

Am I missing something? Should I file a bug?

Yes, please file a bug.

Done, bug #660

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#9 lore raw
In reply to Gary Thomas

Op 18 jan 2011, om 12:36 heeft Gary Thomas het volgende geschreven:

Quoted 8 lines

I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:

[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib

libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules

                                                                                                                                           ^^^^^^^^
#10 lore raw
Quoted 11 lines · Koen Kooi

Op 18 jan 2011, om 12:36 heeft Gary Thomas het volgende geschreven:

Quoted 8 lines

I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:

[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib

libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules

                                                                                                                                            ^^^^^^^^

No, I'm looking for /lib/firmware (kernel loadable firmware) in particular, which is not present.

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#11 lore raw

Op 18 jan 2011, om 14:41 heeft Gary Thomas het volgende geschreven:

Quoted 8 lines · Koen Kooi
Quoted 7 lines

Op 18 jan 2011, om 12:36 heeft Gary Thomas het volgende geschreven:

Quoted 5 lines

I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:

Quoted 7 lines
Quoted 4 lines
Quoted 3 lines

[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib

libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules

                                                                                                                                           ^^^^^^^^

No, I'm looking for /lib/firmware (kernel loadable firmware) in particular, which is not present.

Then why did you say "No kernel modules" in your mail above?