Kernel firmware?
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
Is there some way to enable this?
Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Hi Gary,
Quoted 9 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.Is there some way to enable this?
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
Cheers,
Joshua
Signature · 2 lines
Joshua Lock
Intel Open Source Technology CentreQuoted 11 lines · Joshua Lock
Hi Gary,
Quoted 8 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
Quoted 7 lines
Quoted 1 line
Is there some way to enable this?
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?
I tried to add the module I need using a .bbappend file (attached). It doesn't seem to be processed though - any ideas why?
Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
#DESCRIPTION = "Firmware files for use with Linux kernel" #SECTION = "kernel"
#LICENSE = "Proprietary"
PV = "0.0+git${SRCPV}"
#
# Additional firmware modules
#
#---------------------------------------------------------------------------------------
# LinkSys
#
LICENSE_${PN}-rt73 = "Firmware:LICENCE.rtlwifi_firmware.txt" PROVIDES += "linux-firmware-rt73"
do_install_append() {
install -d ${D}/lib/firmware/
# LinkSys via rt73
install -m 0666 rt73.bin ${D}/lib/firmware
install -m 0666 LICENCE.rtlwifi_firmware.txt ${D}/lib/firmware/
}PACKAGES = "${PN}-rt73"
FILES_${PN}-rt73 = "/lib/firmware/rt73.bin /lib/firmware/LICENCE.rtlwifi_firmware.txt" RPROVIDES_${PN}-rt73 = "${PN}-rt73"
#---------------------------------------------------------------------------------------
Quoted 14 lines · Gary Thomas
Quoted 13 lines · Joshua Lock
Hi Gary,
Quoted 9 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.Is there some way to enable this?
Quoted 8 lines
Quoted 5 lines
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?
You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the MACHINE_EXTRA_RRECOMMENDS.
Cheers,
Joshua
Signature · 2 lines
Joshua Lock
Intel Open Source Technology CentreQuoted 21 lines · Joshua Lock
Quoted 20 lines · Gary Thomas
Quoted 18 lines · Joshua Lock
Hi Gary,
Quoted 9 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to be installed in Poky:
phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.Is there some way to enable this?
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
Quoted 6 lines
Quoted 2 lines
I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?
You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the
MACHINE_EXTRA_RRECOMMENDS.
Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."
It's working now.
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock
Hi Gary,
Quoted 8 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 ->rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 ->rt2x00lib_request_firmware: Error - Failed to request Firmware.Quoted 7 lines
Quoted 1 line
Is there some way to enable this?
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?
Quoted 8 lines
Quoted 3 lines
You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the
MACHINE_EXTRA_RRECOMMENDS.Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."
It's working now.
My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:
root@cobra3530p60:~# opkg list-installed linux* root@cobra3530p60:~# opkg list linux* linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers Debugging files for linux-libc-headers linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers Development files for linux-libc-headers
To be clear, all I did was add "linux-firmware-rt73" to MACHINE_EXTRA_RRECOMMENDS in my <MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?
Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"
Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 55 lines · Gary Thomas
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock
Hi Gary,
Quoted 8 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 ->rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 ->rt2x00lib_request_firmware: Error - Failed to request Firmware.Quoted 7 lines
Quoted 1 line
Is there some way to enable this?
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?
Quoted 8 lines
Quoted 3 lines
You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the
MACHINE_EXTRA_RRECOMMENDS.Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."
It's working now.
My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:
root@cobra3530p60:~# opkg list-installed linux* root@cobra3530p60:~# opkg list linux* linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers Debugging files for linux-libc-headers linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers Development files for linux-libc-headersTo be clear, all I did was add "linux-firmware-rt73" to
MACHINE_EXTRA_RRECOMMENDSin my <MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?
Quoted 3 lines
Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"
I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:
[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib
ld-2.12.1.so libattr.so.1.1.0 libgcc_s.so.1 libnss_dns-2.12.1.so librt-2.12.1.so ld-linux.so.3 libc-2.12.1.so libgudev-1.0.so.0 libnss_dns.so.2 librt.so.1 libBrokenLocale-2.12.1.so libc.so.6 libgudev-1.0.so.0.0.1 libnss_files-2.12.1.so libudev.so.0 libBrokenLocale.so.1 libcidn-2.12.1.so libm-2.12.1.so libnss_files.so.2 libudev.so.0.9.3 libacl.so.1 libcidn.so.1 libm.so.6 libproc-3.2.8.so libutil-2.12.1.so libacl.so.1.1.0 libcrypt-2.12.1.so libnsl-2.12.1.so libpthread-2.12.1.so libutil.so.1 libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules libanl.so.1 libdl-2.12.1.so libnss_compat-2.12.1.so libresolv-2.12.1.so udev libattr.so.1 libdl.so.2 libnss_compat.so.2 libresolv.so.2
Am I missing something? Should I file a bug?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 76 lines · Gary Thomas
Quoted 55 lines · Gary Thomas
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock
Hi Gary,
Quoted 8 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 ->rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 ->rt2x00lib_request_firmware: Error - Failed to request Firmware.Quoted 7 lines
Quoted 1 line
Is there some way to enable this?
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?
Quoted 8 lines
Quoted 3 lines
You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the
MACHINE_EXTRA_RRECOMMENDS.Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."
It's working now.
My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:
root@cobra3530p60:~# opkg list-installed linux* root@cobra3530p60:~# opkg list linux* linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers Debugging files for linux-libc-headers linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers Development files for linux-libc-headersTo be clear, all I did was add "linux-firmware-rt73" to
MACHINE_EXTRA_RRECOMMENDSin my <MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?Quoted 3 lines
Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"
I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib
ld-2.12.1.so libattr.so.1.1.0 libgcc_s.so.1 libnss_dns-2.12.1.so librt-2.12.1.so ld-linux.so.3 libc-2.12.1.so libgudev-1.0.so.0 libnss_dns.so.2 librt.so.1 libBrokenLocale-2.12.1.so libc.so.6 libgudev-1.0.so.0.0.1 libnss_files-2.12.1.so libudev.so.0 libBrokenLocale.so.1 libcidn-2.12.1.so libm-2.12.1.so libnss_files.so.2 libudev.so.0.9.3 libacl.so.1 libcidn.so.1 libm.so.6 libproc-3.2.8.so libutil-2.12.1.so libacl.so.1.1.0 libcrypt-2.12.1.so libnsl-2.12.1.so libpthread-2.12.1.so libutil.so.1 libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules libanl.so.1 libdl-2.12.1.so libnss_compat-2.12.1.so libresolv-2.12.1.so udev libattr.so.1 libdl.so.2 libnss_compat.so.2 libresolv.so.2
Quoted 2 lines
Am I missing something? Should I file a bug?
Yes, please file a bug.
Cheers,
Joshua
Signature · 2 lines
Joshua Lock
Intel Open Source Technology CentreQuoted 77 lines · Joshua Lock
Quoted 76 lines · Gary Thomas
Quoted 55 lines · Gary Thomas
Quoted 25 lines · Gary Thomas
Quoted 24 lines · Joshua Lock
Quoted 22 lines · Gary Thomas
Quoted 11 lines · Joshua Lock
Hi Gary,
Quoted 8 lines · Gary Thomas
I'm trying to get various USB WiFi dongles working on my BeagleBoard (or look-alike). Many of these require runtime downloads of firmware. However, these files don't seem to
be installed in Poky:
phy1 ->rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
phy1 ->rt2x00lib_request_firmware: Error - Failed to request Firmware.Quoted 7 lines
Quoted 1 line
Is there some way to enable this?
There's a linux-firmware recipe (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll have to modify to package the required firmware (at the moment we only package firmware for the Libertas sd8686) and ensure that the packages are included in your images.
I don't see anywhere that linux-firmware-sd8686 is included in an image. Am I missing something?
Quoted 8 lines
Quoted 3 lines
You need to have something pull in the required linux-firmware, for example the igep0020 and igep0030 machines add linux-firmware-sd8686 to the
MACHINE_EXTRA_RRECOMMENDS.Thanks. Doing it this way wasn't totally clear from "ensure that the packages are included in your images."
It's working now.
My exuberance was a bit premature. Indeed, I rebuilt my install image, but the firmware package wasn't installed. On my target, I see:
root@cobra3530p60:~# opkg list-installed linux* root@cobra3530p60:~# opkg list linux* linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel Firmware files for use with Linux kernel linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers Debugging files for linux-libc-headers linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers Development files for linux-libc-headersTo be clear, all I did was add "linux-firmware-rt73" to
MACHINE_EXTRA_RRECOMMENDSin my<MACHINE>.conf file, then rebuild the image using:
% bitbake poky-image-sato
This was from a previously built tree, etc. Did I need to do anything else to get the package actually installed at build time?Quoted 3 lines
Note: If I 'opkg install linux-firmware-rt73' on my target, I get the correct files. I'd just like to understand how to make it happen in the "image"
I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib
ld-2.12.1.so libattr.so.1.1.0 libgcc_s.so.1 libnss_dns-2.12.1.so librt-2.12.1.so ld-linux.so.3 libc-2.12.1.so libgudev-1.0.so.0 libnss_dns.so.2 librt.so.1 libBrokenLocale-2.12.1.so libc.so.6 libgudev-1.0.so.0.0.1 libnss_files-2.12.1.so libudev.so.0 libBrokenLocale.so.1 libcidn-2.12.1.so libm-2.12.1.so libnss_files.so.2 libudev.so.0.9.3 libacl.so.1 libcidn.so.1 libm.so.6 libproc-3.2.8.so libutil-2.12.1.so libacl.so.1.1.0 libcrypt-2.12.1.so libnsl-2.12.1.so libpthread-2.12.1.so libutil.so.1 libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules libanl.so.1 libdl-2.12.1.so libnss_compat-2.12.1.so libresolv-2.12.1.so udev libattr.so.1 libdl.so.2 libnss_compat.so.2 libresolv.so.2
Quoted 4 lines
Quoted 2 lines
Am I missing something? Should I file a bug?
Yes, please file a bug.
Done, bug #660
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Op 18 jan 2011, om 12:36 heeft Gary Thomas het volgende geschreven:
Quoted 8 lines
I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib
libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules
^^^^^^^^
Quoted 11 lines · Koen Kooi
Op 18 jan 2011, om 12:36 heeft Gary Thomas het volgende geschreven:
Quoted 8 lines
I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib
libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules
^^^^^^^^
No, I'm looking for /lib/firmware (kernel loadable firmware) in particular, which is not present.
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Op 18 jan 2011, om 14:41 heeft Gary Thomas het volgende geschreven:
Quoted 8 lines · Koen Kooi
Quoted 7 lines
Op 18 jan 2011, om 12:36 heeft Gary Thomas het volgende geschreven:
Quoted 5 lines
I don't see any kernel modules get installed in one of Poky's "supported" platforms either. I just tried
MACHINE=igep0030 bitbake poky-image-minimal
in a clean tree. No kernel modules:
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
[gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib
libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules
^^^^^^^^No, I'm looking for
/lib/firmware(kernel loadable firmware) in particular, which is not present.
Then why did you say "No kernel modules" in your mail above?