Skip to contentSkip to conversation

Fields alignment when extended mask is present

DISCUSSION Roberto Riggio 2 participants 5 messages Feb 20, 2011 – Feb 21, 2011 4 messages not in the archive

lore
Share & tools
lore
#0 lore raw

Hi,

I'm generating a radio tap header with extended mask in order to specify a multi rate retry chain. In the first mask i have 4 fields each of them 8 bits long, so no padding problem.

In the second, third and forth mask I have only the rate and the retries fields should I use padding between one mask and the next:

rate_1 (8)
retry_1 (8)
pad (8)
pad (8)
rate_2 (8)
retry_2 (8)
pad (8)
pad (8)

or insted:

rate_1 (8)
retry _1 (8)
rate_2 (8)
retry _2 (8)

thanks

Signature · 31 lines
--------------------------------------------------------
Roberto Riggio, Ph.D.
CREATE-NET
Network&  Security Solutions for Pervasive Computing Systems (iNSPIRE)
Senior Researcher
Via alla Cascata 56/D - 38123 Povo Trento (Italy)
e-mail: roberto.riggio-2TmCWn7/[email protected]
Tel: (+39) 0461 408400 - interno/extension 708
Fax: (+39) 0461 421157
www.create-net.org/~rriggio
--------------------------------------------------------

The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited according to
the Italian Law 196/2003 of the Legislature. If you received this in
error, please contact the sender and delete the material from any
computer.

Le informazioni contenute in questo messaggio di posta elettronica e nei
file allegati sono da considerarsi strettamente riservate. Il loro
utilizzo e' consentito esclusivamente al destinatario del messaggio, per
le finalita' indicate nel messaggio stesso. Qualora riceveste questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla cancellazione del
messaggio stesso dal Vostro sistema. Trattenere il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo,
od utilizzarlo per finalita' diverse, costituisce comportamento
contrario ai principi dettati dal D. Lgs. 196/2003.

A message that is not in the archive (sent off-list or not yet received): 4D60F317.8090007-2TmCWn7/[email protected]

#2 lore raw
Quoted 18 lines · Roberto Riggio

Hi,

I'm generating a radio tap header with extended mask in order to specify a multi rate retry chain. In the first mask i have 4 fields each of them 8 bits long, so no padding problem.

In the second, third and forth mask I have only the rate and the retries fields should I use padding between one mask and the next:

rate_1 (8)
retry_1 (8)
pad (8)
pad (8)
rate_2 (8)
retry_2 (8)
pad (8)
pad (8)

Quoted 6 lines

or insted:

rate_1 (8)
retry _1 (8)
rate_2 (8)
retry _2 (8)

What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.

johannes

A message that is not in the archive (sent off-list or not yet received): 1298280460.3707.1.camel-8upI4CBIZJIJvtFkdXX2HixXY32XiHfO@public.gmane.org

#4 lore raw

Il 21/02/2011 10:27, Johannes Berg ha scritto:

Quoted 19 lines · Roberto Riggio
Quoted 18 lines

Hi,

I'm generating a radio tap header with extended mask in order to specify a multi rate retry chain. In the first mask i have 4 fields each of them 8 bits long, so no padding problem.

In the second, third and forth mask I have only the rate and the retries fields should I use padding between one mask and the next:

rate_1 (8)
retry_1 (8)
pad (8)
pad (8)
rate_2 (8)
retry_2 (8)
pad (8)
pad (8)

Quoted 8 lines
Quoted 6 lines

or insted:

rate_1 (8)
retry _1 (8)
rate_2 (8)
retry _2 (8)

What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.

(8) was the field length. in the example above i;ve repoted two different radiotap headers where i specify twice the rate and the retries field.

of course i know that in this case i will have to put to it-present bitmasks and i will have to set the bit 31 of the first bitmask to 1.

what i'm not sure is if i have to pad the first "block" to the word boundary or not.

Quoted 2 lines

johannes

Signature · 31 lines
--------------------------------------------------------
Roberto Riggio, Ph.D.
CREATE-NET
Network&  Security Solutions for Pervasive Computing Systems (iNSPIRE)
Senior Researcher
Via alla Cascata 56/D - 38123 Povo Trento (Italy)
e-mail: roberto.riggio-2TmCWn7/[email protected]
Tel: (+39) 0461 408400 - interno/extension 708
Fax: (+39) 0461 421157
www.create-net.org/~rriggio
--------------------------------------------------------

The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited according to
the Italian Law 196/2003 of the Legislature. If you received this in
error, please contact the sender and delete the material from any
computer.

Le informazioni contenute in questo messaggio di posta elettronica e nei
file allegati sono da considerarsi strettamente riservate. Il loro
utilizzo e' consentito esclusivamente al destinatario del messaggio, per
le finalita' indicate nel messaggio stesso. Qualora riceveste questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla cancellazione del
messaggio stesso dal Vostro sistema. Trattenere il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo,
od utilizzarlo per finalita' diverse, costituisce comportamento
contrario ai principi dettati dal D. Lgs. 196/2003.

A message that is not in the archive (sent off-list or not yet received): 4D6234C5.2020201-2TmCWn7/[email protected]

#6 lore raw
Quoted 10 lines · Roberto Riggio
Quoted 6 lines
Quoted 4 lines

rate_1 (8)
retry _1 (8)
rate_2 (8)
retry _2 (8)

What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.

(8) was the field length. in the example above i;ve repoted two different radiotap headers where i specify twice the rate and the retries field.

Quoted 5 lines

of course i know that in this case i will have to put to it-present bitmasks and i will have to set the bit 31 of the first bitmask to 1.

what i'm not sure is if i have to pad the first "block" to the word boundary or not.

I still don't get it. If the field length is 8 bits (1 byte) you don't need any alignment anyway.

johannes

A message that is not in the archive (sent off-list or not yet received): 1298281847.3707.2.camel-8upI4CBIZJIJvtFkdXX2HixXY32XiHfO@public.gmane.org

#8 lore raw

Il 21/02/2011 10:50, Johannes Berg ha scritto:

Quoted 12 lines · Roberto Riggio
Quoted 11 lines
Quoted 7 lines
Quoted 5 lines

rate_1 (8)
retry _1 (8)
rate_2 (8)
retry _2 (8)

What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.

(8) was the field length. in the example above i;ve repoted two different radiotap headers where i specify twice the rate and the retries field.

Quoted 8 lines
Quoted 5 lines

of course i know that in this case i will have to put to it-present bitmasks and i will have to set the bit 31 of the first bitmask to 1.

what i'm not sure is if i have to pad the first "block" to the word boundary or not.

I still don't get it. If the field length is 8 bits (1 byte) you don't need any alignment anyway.

Ok thanks this is what i wasn;t sure of.

Quoted 2 lines

johannes

Signature · 31 lines
--------------------------------------------------------
Roberto Riggio, Ph.D.
CREATE-NET
Network&  Security Solutions for Pervasive Computing Systems (iNSPIRE)
Senior Researcher
Via alla Cascata 56/D - 38123 Povo Trento (Italy)
e-mail: roberto.riggio-2TmCWn7/[email protected]
Tel: (+39) 0461 408400 - interno/extension 708
Fax: (+39) 0461 421157
www.create-net.org/~rriggio
--------------------------------------------------------

The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited according to
the Italian Law 196/2003 of the Legislature. If you received this in
error, please contact the sender and delete the material from any
computer.

Le informazioni contenute in questo messaggio di posta elettronica e nei
file allegati sono da considerarsi strettamente riservate. Il loro
utilizzo e' consentito esclusivamente al destinatario del messaggio, per
le finalita' indicate nel messaggio stesso. Qualora riceveste questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla cancellazione del
messaggio stesso dal Vostro sistema. Trattenere il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo,
od utilizzarlo per finalita' diverse, costituisce comportamento
contrario ai principi dettati dal D. Lgs. 196/2003.