Fields alignment when extended mask is present
Hi,
I'm generating a radio tap header with extended mask in order to specify a multi rate retry chain. In the first mask i have 4 fields each of them 8 bits long, so no padding problem.
In the second, third and forth mask I have only the rate and the retries fields should I use padding between one mask and the next:
rate_1 (8)retry_1 (8)
pad (8)
pad (8)rate_2 (8)retry_2 (8)
pad (8)
pad (8)
or insted:
rate_1 (8)
retry _1 (8)rate_2 (8)
retry _2 (8)
thanks
Signature · 31 lines
-------------------------------------------------------- Roberto Riggio, Ph.D. CREATE-NET Network& Security Solutions for Pervasive Computing Systems (iNSPIRE) Senior Researcher Via alla Cascata 56/D - 38123 Povo Trento (Italy) e-mail: roberto.riggio-2TmCWn7/[email protected] Tel: (+39) 0461 408400 - interno/extension 708 Fax: (+39) 0461 421157 www.create-net.org/~rriggio -------------------------------------------------------- The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited according to the Italian Law 196/2003 of the Legislature. If you received this in error, please contact the sender and delete the material from any computer. Le informazioni contenute in questo messaggio di posta elettronica e nei file allegati sono da considerarsi strettamente riservate. Il loro utilizzo e' consentito esclusivamente al destinatario del messaggio, per le finalita' indicate nel messaggio stesso. Qualora riceveste questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla cancellazione del messaggio stesso dal Vostro sistema. Trattenere il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalita' diverse, costituisce comportamento contrario ai principi dettati dal D. Lgs. 196/2003.
Quoted 18 lines · Roberto Riggio
Hi,
I'm generating a radio tap header with extended mask in order to specify a multi rate retry chain. In the first mask i have 4 fields each of them 8 bits long, so no padding problem.
In the second, third and forth mask I have only the rate and the retries fields should I use padding between one mask and the next:
rate_1(8)retry_1(8)
pad (8)
pad (8)rate_2(8)retry_2(8)
pad (8)
pad (8)
Quoted 6 lines
or insted:
rate_1(8)
retry _1 (8)rate_2(8)
retry _2 (8)
What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.
johannes
Il 21/02/2011 10:27, Johannes Berg ha scritto:
Quoted 19 lines · Roberto Riggio
Quoted 18 lines
Hi,
I'm generating a radio tap header with extended mask in order to specify a multi rate retry chain. In the first mask i have 4 fields each of them 8 bits long, so no padding problem.
In the second, third and forth mask I have only the rate and the retries fields should I use padding between one mask and the next:
rate_1(8)retry_1(8)
pad (8)
pad (8)rate_2(8)retry_2(8)
pad (8)
pad (8)
Quoted 8 lines
Quoted 6 lines
or insted:
rate_1(8)
retry _1 (8)rate_2(8)
retry _2 (8)What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.
(8) was the field length. in the example above i;ve repoted two different radiotap headers where i specify twice the rate and the retries field.
of course i know that in this case i will have to put to it-present bitmasks and i will have to set the bit 31 of the first bitmask to 1.
what i'm not sure is if i have to pad the first "block" to the word boundary or not.
Quoted 2 lines
johannes
Signature · 31 lines
-------------------------------------------------------- Roberto Riggio, Ph.D. CREATE-NET Network& Security Solutions for Pervasive Computing Systems (iNSPIRE) Senior Researcher Via alla Cascata 56/D - 38123 Povo Trento (Italy) e-mail: roberto.riggio-2TmCWn7/[email protected] Tel: (+39) 0461 408400 - interno/extension 708 Fax: (+39) 0461 421157 www.create-net.org/~rriggio -------------------------------------------------------- The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited according to the Italian Law 196/2003 of the Legislature. If you received this in error, please contact the sender and delete the material from any computer. Le informazioni contenute in questo messaggio di posta elettronica e nei file allegati sono da considerarsi strettamente riservate. Il loro utilizzo e' consentito esclusivamente al destinatario del messaggio, per le finalita' indicate nel messaggio stesso. Qualora riceveste questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla cancellazione del messaggio stesso dal Vostro sistema. Trattenere il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalita' diverse, costituisce comportamento contrario ai principi dettati dal D. Lgs. 196/2003.
Quoted 10 lines · Roberto Riggio
Quoted 6 lines
Quoted 4 lines
rate_1(8)
retry _1 (8)rate_2(8)
retry _2 (8)What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.
(8) was the field length. in the example above i;ve repoted two different radiotap headers where i specify twice the rate and the retries field.
Quoted 5 lines
of course i know that in this case i will have to put to it-present bitmasks and i will have to set the bit 31 of the first bitmask to 1.
what i'm not sure is if i have to pad the first "block" to the word boundary or not.
I still don't get it. If the field length is 8 bits (1 byte) you don't need any alignment anyway.
johannes
Il 21/02/2011 10:50, Johannes Berg ha scritto:
Quoted 12 lines · Roberto Riggio
Quoted 11 lines
Quoted 7 lines
Quoted 5 lines
rate_1(8)
retry _1 (8)rate_2(8)
retry _2 (8)What's with the "(8)"? Generally, anything in the data portion of radiotap needs to be padded to the right position.
(8) was the field length. in the example above i;ve repoted two different radiotap headers where i specify twice the rate and the retries field.
Quoted 8 lines
Quoted 5 lines
of course i know that in this case i will have to put to it-present bitmasks and i will have to set the bit 31 of the first bitmask to 1.
what i'm not sure is if i have to pad the first "block" to the word boundary or not.
I still don't get it. If the field length is 8 bits (1 byte) you don't need any alignment anyway.
Ok thanks this is what i wasn;t sure of.
Quoted 2 lines
johannes
Signature · 31 lines
-------------------------------------------------------- Roberto Riggio, Ph.D. CREATE-NET Network& Security Solutions for Pervasive Computing Systems (iNSPIRE) Senior Researcher Via alla Cascata 56/D - 38123 Povo Trento (Italy) e-mail: roberto.riggio-2TmCWn7/[email protected] Tel: (+39) 0461 408400 - interno/extension 708 Fax: (+39) 0461 421157 www.create-net.org/~rriggio -------------------------------------------------------- The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited according to the Italian Law 196/2003 of the Legislature. If you received this in error, please contact the sender and delete the material from any computer. Le informazioni contenute in questo messaggio di posta elettronica e nei file allegati sono da considerarsi strettamente riservate. Il loro utilizzo e' consentito esclusivamente al destinatario del messaggio, per le finalita' indicate nel messaggio stesso. Qualora riceveste questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla cancellazione del messaggio stesso dal Vostro sistema. Trattenere il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalita' diverse, costituisce comportamento contrario ai principi dettati dal D. Lgs. 196/2003.