Skip to contentSkip to conversation

Question about snd_mixer_selem_get_playback_dB_range()

DISCUSSION Tanu Kaskinen 4 participants 8 messages Mar 21, 2011 – Apr 11, 2011

lore
Share & tools
lore
#0 lore raw

Hi,

I have added code to Pulseaudio that checks that the kernel driver returns the same values if I call snd_mixer_selem_get_playback_dB_range() or snd_mixer_selem_ask_playback_vol_dB() with the lowest and highest volume steps. The reason I do this is that I've seen a driver that didn't return correct values from _dB_range() (it's fixed nowadays), so it's possible that the same kind of bugs will be seen in the future too. Doing this check at Pulseaudio startup helps to detect such bugs early.

My question is about the case where the lowest volume step is mute. Is it a bug in the driver if _dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain in such case?

Signature · 1 line
Tanu
#1 lore raw

2011/3/21 Tanu Kaskinen <[email protected]>

Quoted 11 lines

Hi,

I have added code to Pulseaudio that checks that the kernel driver returns the same values if I call snd_mixer_selem_get_playback_dB_range() or snd_mixer_selem_ask_playback_vol_dB() with the lowest and highest volume steps. The reason I do this is that I've seen a driver that didn't return correct values from _dB_range() (it's fixed nowadays), so it's possible that the same kind of bugs will be seen in the future too. Doing this check at Pulseaudio startup helps to detect such bugs early.

Quoted 5 lines

My question is about the case where the lowest volume step is mute. Is it a bug in the driver if _dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain in such case?

AFAIK , only those STAC920x codec has SND_CTL_TLV_DB_GAIN_MUTE

most driver does not has min dB mute as the alsa driver just use the values in the datasheet of most codec and DAC

So it is not any driver bug

I guess why the volume slider of gnome volume control is mute at mint is just follow the behaviour of those OSS driver

#2 lore raw
Quoted 13 lines · Raymond Yau

2011/3/21 Tanu Kaskinen <[email protected]>

Quoted 11 lines

Hi,

I have added code to Pulseaudio that checks that the kernel driver returns the same values if I call snd_mixer_selem_get_playback_dB_range() or snd_mixer_selem_ask_playback_vol_dB() with the lowest and highest volume steps. The reason I do this is that I've seen a driver that didn't return correct values from _dB_range() (it's fixed nowadays), so it's possible that the same kind of bugs will be seen in the future too. Doing this check at Pulseaudio startup helps to detect such bugs early.

Quoted 6 lines
Quoted 5 lines

My question is about the case where the lowest volume step is mute. Is it a bug in the driver if _dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain in such case?

AFAIK , only those STAC920x codec has SND_CTL_TLV_DB_GAIN_MUTE

Also some broken HDA cards, but I'm not referring to any particular driver. I just want to get my code right.

Quoted 4 lines

most driver does not has min dB mute as the alsa driver just use the values in the datasheet of most codec and DAC

So it is not any driver bug

What is not any driver bug?

Quoted 2 lines

I guess why the volume slider of gnome volume control is mute at mint is just follow the behaviour of those OSS driver

Thank you for your reply. Unfortunately, I'm not much wiser after reading it.

I'll repeat my question:

Is it a bug in alsa (the driver or alsa-lib or whatever) if snd_mixer_selem_get_playback_dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain, if the lowest volume step for the element is mute?

Signature · 1 line
Tanu
#3 lore raw
Quoted 4 lines · Tanu Kaskinen
Quoted 1 line · Raymond Yau

AFAIK , only those STAC920x codec has SND_CTL_TLV_DB_GAIN_MUTE

Also some broken HDA cards,

Where "some" = "those that use a STAC920x codec".

Quoted 1 line

What is not any driver bug?

That the hardware reported a wrong dB value for the lowest volume setting. The latest driver has a workaround.

Quoted 4 lines

Is it a bug in alsa (the driver or alsa-lib or whatever) if snd_mixer_selem_get_playback_dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain, if the lowest volume step for the element is mute?

Yes.

Regards,
Clemens

#4 lore raw
Quoted 7 lines · Clemens Ladisch
Quoted 4 lines · Tanu Kaskinen
Quoted 1 line · Raymond Yau

AFAIK , only those STAC920x codec has SND_CTL_TLV_DB_GAIN_MUTE

Also some broken HDA cards,

Where "some" = "those that use a STAC920x codec".

Ah, ok :D

Quoted 11 lines
Quoted 1 line

What is not any driver bug?

That the hardware reported a wrong dB value for the lowest volume setting. The latest driver has a workaround.

Quoted 4 lines

Is it a bug in alsa (the driver or alsa-lib or whatever) if snd_mixer_selem_get_playback_dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain, if the lowest volume step for the element is mute?

Yes.

Thank you for the answer!

Signature · 1 line
Tanu
#5 lore raw
Quoted 8 lines · ext Tanu Kaskinen
Quoted 6 lines
Quoted 4 lines

Is it a bug in alsa (the driver or alsa-lib or whatever) if snd_mixer_selem_get_playback_dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain, if the lowest volume step for the element is mute?

Yes.

Thank you for the answer!

AFAIK the SND_CTL_TLV_DB_GAIN_MUTE received a fix regarding to this:
2f6206da0c1ff88235e6eca0077343f22a4b43ee
tlv: fix returned dB information for min-is-mute controls

Looking at the patch itself, it does going to return min=SND_CTL_TLV_DB_GAIN_MUTE from snd_tlv_get_dB_range function.

However I have my doubts, if this is the correct way...

Take these two gain controls for example:

RAW value   GAIN1  GAIN2
   0        mute   mute
   1        -2dB   0dB
   2         0dB   1dB
   3         2dB   2dB

If user space asks for the dB_range:

        min    max
GAIN1   mute   2dB
GAIN2   mute   2dB

They are going to return with the same range, however if you ask for -2dB on both:
GAIN1 will be -2dB
GAIN2 will be muted

So we are kind of hiding the dB range for the control.
I don't know how to fix it (well, I have some ideas, but it would need changes in the API IMHO).

Signature · 1 line
Péter
#6 lore raw
Quoted 13 lines · Peter Ujfalusi

Looking at the patch itself, it does going to return min=SND_CTL_TLV_DB_GAIN_MUTE from snd_tlv_get_dB_range function.

However I have my doubts, if this is the correct way...

Take these two gain controls for example:

RAW value   GAIN1  GAIN2
   0        mute   mute
   1        -2dB   0dB
   2         0dB   1dB
   3         2dB   2dB

If user space asks for the dB_range:

Quoted 8 lines
        min    max
GAIN1   mute   2dB
GAIN2   mute   2dB

They are going to return with the same range, however if you ask for -2dB on both:
GAIN1 will be -2dB
GAIN2 will be muted

Or not, depending on which direction you instruct it to round.

Quoted 1 line

So we are kind of hiding the dB range for the control.

This is unavoidable if the only information returned is min/max. To get the entire curve and resolution, you'd have to get the dB value for each raw volume value.

Regards,
Clemens

#7 lore raw

2011/3/22 Clemens Ladisch <[email protected]>

Quoted 23 lines
Quoted 13 lines · Peter Ujfalusi

Looking at the patch itself, it does going to return min=SND_CTL_TLV_DB_GAIN_MUTE from snd_tlv_get_dB_range function.

However I have my doubts, if this is the correct way...

Take these two gain controls for example:

RAW value   GAIN1  GAIN2
   0        mute   mute
   1        -2dB   0dB
   2         0dB   1dB
   3         2dB   2dB

If user space asks for the dB_range:

Quoted 8 lines
        min    max
GAIN1   mute   2dB
GAIN2   mute   2dB

They are going to return with the same range, however if you ask for -2dB on both:
GAIN1 will be -2dB
GAIN2 will be muted

Quoted 9 lines

Or not, depending on which direction you instruct it to round.

Quoted 1 line

So we are kind of hiding the dB range for the control.

This is unavoidable if the only information returned is min/max. To get the entire curve and resolution, you'd have to get the dB value for each raw volume value.

Should the application include the dB range of "Virtual Master" ?

e.g. pulseaudio calculate the dB range (-168dB to 0dB ) on my ad1988 HDA codec
which "front", "surround", "center/lfe" and "side" have (-58.0 to 0dB)

D: alsa-mixer.c: Activating path analog-output
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=39, min_dB=-168, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
I: alsa-sink.c: Hardware volume ranges from -168.00 dB to 0.00 dB.
I: alsa-sink.c: Fixing base volume to 0.00 dB
I: alsa-sink.c: Successfully enabled synchronous volume.
I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-sink.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: Slave: Hardware PCM card 1 'HDA Intel' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: appl_ptr : 0
D: alsa-util.c: hw_ptr : 0
D: alsa-sink.c: Thread starting up
D: alsa-sink.c: Read hardware volume: 0: 100% 1: 100%

SB Live! platinum (CT4760P) which has "Surround Playback Volume" with SND_CTL_TLV_DB_GAIN_MUTE , "Master and PCM Playback Volume" of stac9721

and PA report (-100081dB to +12 dB)

D: alsa-mixer.c: Activating path analog-output
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-100081, max_dB=12
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element External Amplifier, direction=1, switch=4, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Option on (output-amplifier-on/Amplifier) index=1, priority=10
D: alsa-mixer.c: Option off (output-amplifier-off/No Amplifier) index=0, priority=0
D: alsa-mixer.c: Setting output-amplifier-on (Amplifier) priority=10
D: alsa-mixer.c: Setting output-amplifier-off (No Amplifier) priority=0
I: alsa-sink.c: Hardware volume ranges from -100080.99 dB to 12.00 dB.
I: alsa-sink.c: Fixing base volume to -12.00 dB