Question about snd_mixer_selem_get_playback_dB_range()
Hi,
I have added code to Pulseaudio that checks that the kernel driver returns the same values if I call snd_mixer_selem_get_playback_dB_range() or snd_mixer_selem_ask_playback_vol_dB() with the lowest and highest volume steps. The reason I do this is that I've seen a driver that didn't return correct values from _dB_range() (it's fixed nowadays), so it's possible that the same kind of bugs will be seen in the future too. Doing this check at Pulseaudio startup helps to detect such bugs early.
My question is about the case where the lowest volume step is mute. Is it a bug in the driver if _dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain in such case?
Signature · 1 line
Tanu
2011/3/21 Tanu Kaskinen <[email protected]>
Quoted 11 lines
Hi,
I have added code to Pulseaudio that checks that the kernel driver returns the same values if I call
snd_mixer_selem_get_playback_dB_range()orsnd_mixer_selem_ask_playback_vol_dB()with the lowest and highest volume steps. The reason I do this is that I've seen a driver that didn't return correct values from_dB_range()(it's fixed nowadays), so it's possible that the same kind of bugs will be seen in the future too. Doing this check at Pulseaudio startup helps to detect such bugs early.
Quoted 5 lines
My question is about the case where the lowest volume step is mute. Is it a bug in the driver if
_dB_range()returns something else thanSND_CTL_TLV_DB_GAIN_MUTEas the min gain in such case?
AFAIK , only those STAC920x codec has SND_CTL_TLV_DB_GAIN_MUTE
most driver does not has min dB mute as the alsa driver just use the values in the datasheet of most codec and DAC
So it is not any driver bug
I guess why the volume slider of gnome volume control is mute at mint is just follow the behaviour of those OSS driver
Quoted 13 lines · Raymond Yau
2011/3/21 Tanu Kaskinen <[email protected]>
Quoted 11 lines
Hi,
I have added code to Pulseaudio that checks that the kernel driver returns the same values if I call
snd_mixer_selem_get_playback_dB_range()orsnd_mixer_selem_ask_playback_vol_dB()with the lowest and highest volume steps. The reason I do this is that I've seen a driver that didn't return correct values from_dB_range()(it's fixed nowadays), so it's possible that the same kind of bugs will be seen in the future too. Doing this check at Pulseaudio startup helps to detect such bugs early.
Quoted 6 lines
Quoted 5 lines
My question is about the case where the lowest volume step is mute. Is it a bug in the driver if
_dB_range()returns something else thanSND_CTL_TLV_DB_GAIN_MUTEas the min gain in such case?AFAIK , only those STAC920x codec has
SND_CTL_TLV_DB_GAIN_MUTE
Also some broken HDA cards, but I'm not referring to any particular driver. I just want to get my code right.
Quoted 4 lines
most driver does not has min dB mute as the alsa driver just use the values in the datasheet of most codec and DAC
So it is not any driver bug
What is not any driver bug?
Quoted 2 lines
I guess why the volume slider of gnome volume control is mute at mint is just follow the behaviour of those OSS driver
Thank you for your reply. Unfortunately, I'm not much wiser after reading it.
I'll repeat my question:
Is it a bug in alsa (the driver or alsa-lib or whatever) if snd_mixer_selem_get_playback_dB_range() returns something else than SND_CTL_TLV_DB_GAIN_MUTE as the min gain, if the lowest volume step for the element is mute?
Signature · 1 line
Tanu
Quoted 4 lines · Tanu Kaskinen
Quoted 1 line · Raymond Yau
AFAIK , only those STAC920x codec has
SND_CTL_TLV_DB_GAIN_MUTEAlso some broken HDA cards,
Where "some" = "those that use a STAC920x codec".
Quoted 1 line
What is not any driver bug?
That the hardware reported a wrong dB value for the lowest volume setting. The latest driver has a workaround.
Quoted 4 lines
Is it a bug in alsa (the driver or alsa-lib or whatever) if
snd_mixer_selem_get_playback_dB_range()returns something else thanSND_CTL_TLV_DB_GAIN_MUTEas the min gain, if the lowest volume step for the element is mute?
Yes.
Regards,
Clemens
Quoted 7 lines · Clemens Ladisch
Quoted 4 lines · Tanu Kaskinen
Quoted 1 line · Raymond Yau
AFAIK , only those STAC920x codec has
SND_CTL_TLV_DB_GAIN_MUTEAlso some broken HDA cards,
Where "some" = "those that use a STAC920x codec".
Ah, ok :D
Quoted 11 lines
Quoted 1 line
What is not any driver bug?
That the hardware reported a wrong dB value for the lowest volume setting. The latest driver has a workaround.
Quoted 4 lines
Is it a bug in alsa (the driver or alsa-lib or whatever) if
snd_mixer_selem_get_playback_dB_range()returns something else thanSND_CTL_TLV_DB_GAIN_MUTEas the min gain, if the lowest volume step for the element is mute?Yes.
Thank you for the answer!
Signature · 1 line
Tanu
Quoted 8 lines · ext Tanu Kaskinen
Quoted 6 lines
Quoted 4 lines
Is it a bug in alsa (the driver or alsa-lib or whatever) if
snd_mixer_selem_get_playback_dB_range()returns something else thanSND_CTL_TLV_DB_GAIN_MUTEas the min gain, if the lowest volume step for the element is mute?Yes.
Thank you for the answer!
AFAIK the SND_CTL_TLV_DB_GAIN_MUTE received a fix regarding to this:2f6206da0c1ff88235e6eca0077343f22a4b43ee
tlv: fix returned dB information for min-is-mute controls
Looking at the patch itself, it does going to return min=SND_CTL_TLV_DB_GAIN_MUTE from snd_tlv_get_dB_range function.
However I have my doubts, if this is the correct way...
Take these two gain controls for example:
RAW value GAIN1 GAIN2 0 mute mute 1 -2dB 0dB 2 0dB 1dB 3 2dB 2dB
If user space asks for the dB_range:
min max GAIN1 mute 2dB GAIN2 mute 2dB
They are going to return with the same range, however if you ask for -2dB on both:
GAIN1 will be -2dB
GAIN2 will be muted
So we are kind of hiding the dB range for the control.
I don't know how to fix it (well, I have some ideas, but it would need changes in the API IMHO).
Signature · 1 line
Péter
Quoted 13 lines · Peter Ujfalusi
Looking at the patch itself, it does going to return min=SND_CTL_TLV_DB_GAIN_MUTE from
snd_tlv_get_dB_rangefunction.However I have my doubts, if this is the correct way...
Take these two gain controls for example:
RAW value GAIN1 GAIN2 0 mute mute 1 -2dB 0dB 2 0dB 1dB 3 2dB 2dBIf user space asks for the
dB_range:
Quoted 8 lines
min max GAIN1 mute 2dB GAIN2 mute 2dBThey are going to return with the same range, however if you ask for -2dB on both:
GAIN1 will be -2dB
GAIN2 will be muted
Or not, depending on which direction you instruct it to round.
Quoted 1 line
So we are kind of hiding the dB range for the control.
This is unavoidable if the only information returned is min/max. To get the entire curve and resolution, you'd have to get the dB value for each raw volume value.
Regards,
Clemens
2011/3/22 Clemens Ladisch <[email protected]>
Quoted 23 lines
Quoted 13 lines · Peter Ujfalusi
Looking at the patch itself, it does going to return min=SND_CTL_TLV_DB_GAIN_MUTE from
snd_tlv_get_dB_rangefunction.However I have my doubts, if this is the correct way...
Take these two gain controls for example:
RAW value GAIN1 GAIN2 0 mute mute 1 -2dB 0dB 2 0dB 1dB 3 2dB 2dBIf user space asks for the
dB_range:Quoted 8 lines
min max GAIN1 mute 2dB GAIN2 mute 2dBThey are going to return with the same range, however if you ask for -2dB on both:
GAIN1 will be -2dB
GAIN2 will be muted
Quoted 9 lines
Or not, depending on which direction you instruct it to round.
Quoted 1 line
So we are kind of hiding the dB range for the control.
This is unavoidable if the only information returned is min/max. To get the entire curve and resolution, you'd have to get the dB value for each raw volume value.
Should the application include the dB range of "Virtual Master" ?
e.g. pulseaudio calculate the dB range (-168dB to 0dB ) on my ad1988 HDA codec
which "front", "surround", "center/lfe" and "side" have (-58.0 to 0dB)
D: alsa-mixer.c: Activating path analog-output
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=39, min_dB=-168, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
I: alsa-sink.c: Hardware volume ranges from -168.00 dB to 0.00 dB.
I: alsa-sink.c: Fixing base volume to 0.00 dB
I: alsa-sink.c: Successfully enabled synchronous volume.
I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-sink.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: Slave: Hardware PCM card 1 'HDA Intel' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: appl_ptr : 0
D: alsa-util.c: hw_ptr : 0
D: alsa-sink.c: Thread starting up
D: alsa-sink.c: Read hardware volume: 0: 100% 1: 100%
SB Live! platinum (CT4760P) which has "Surround Playback Volume" with SND_CTL_TLV_DB_GAIN_MUTE , "Master and PCM Playback Volume" of stac9721
and PA report (-100081dB to +12 dB)
D: alsa-mixer.c: Activating path analog-output
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-100081, max_dB=12
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element External Amplifier, direction=1, switch=4, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Option on (output-amplifier-on/Amplifier) index=1, priority=10
D: alsa-mixer.c: Option off (output-amplifier-off/No Amplifier) index=0, priority=0
D: alsa-mixer.c: Setting output-amplifier-on (Amplifier) priority=10
D: alsa-mixer.c: Setting output-amplifier-off (No Amplifier) priority=0
I: alsa-sink.c: Hardware volume ranges from -100080.99 dB to 12.00 dB.
I: alsa-sink.c: Fixing base volume to -12.00 dB