Make all it87 drivers SMP safe
v7 cover Make all it87 drivers SMP safe
There are 3 different drivers that touch the it87 hardware registers. The 3 drivers have been written independently and access the it87 hardware registers assuming they are the only driver accessing it. This change attempts to serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy. The use of the above macro makes it possible to get rid of spinlocks in it8712f_wdt.c and it87_wdt.c watchdog drivers. This also greatly simplifies the implementation of it87_wdt.c driver.
01 - Changes to it87 watchdog driver to use "request_muxed_region"
drivers/watchdog/it8712f_wdt.c drivers/watchdog/it87_wdt.c
02 - Chages to hwmon it87 driver to use "request_muxed_region"
drivers/hwmon/it87.c
drivers/hwmon/it87.c | 14 ++++- drivers/watchdog/it8712f_wdt.c | 53 ++++++++++++------ drivers/watchdog/it87_wdt.c | 119 ++++++++++++++++++++++------------------ 3 files changed, 113 insertions(+), 73 deletions(-)
Patch History:
v7:
- superio_enter return error if call to "request_muxed_region" fails. Rest of the changes deal with error returns from superio_enter. Changes to it87_wdt.c are untested.
v6:
- Pay attention to value returned by request_muxed_region. The first call to request_muxed_region will attempt 10 times to reserve the region before it gives up. This will typically get called from the driver init routines. If this succeeds then subsequent calls wait forever for the resource to be available.
v5:
- Remove unnecessary while from superio_enter.
v4:
- Remove extra braces in superio_enter routines.
v3:
- Totally abandon the spinlock based approach and use "request_muxed_region" to hold off requestors if the resource is busy.
v2:
- More verbose patch headers. Add In-Reply-To: field.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
PATCH v7 1/2 Use "request_muxed_region" in it87 watchdog drivers
01 - Changes to it87 watchdog driver to use "request_muxed_region" Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy.
The use of the above macro makes it possible to get rid of spinlocks in it8712f_wdt.c and it87_wdt.c watchdog drivers. This also greatly simplifies the implementation of it87_wdt.c driver.
"superio_enter" will return an error if call to "request_muxed_region" fails.
Rest of the code change is to ripple an error return from superio_enter to the top level.
---
drivers/watchdog/it8712f_wdt.c +36 -17
@@ -51,7 +51,6 @@ MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");static unsigned long wdt_open;static unsigned expect_close; -static spinlock_t io_lock;static unsigned char revision;/* Dog Food address - We use the game port address */
@@ -121,20 +120,27 @@ static inline void superio_select(int ldn)outb (ldn,VAL ); } -static inline void superio_enter (void ) +static inline int +superio_enter (void ) { -spin_lock (&io_lock); +/* +* Try to reserve REG and REG + 1 for exclusive access. +*/ +if (!request_muxed_region (REG ,2 ,NAME )) +return -EBUSY ; +outb (0x87 ,REG );outb (0x01 ,REG );outb (0x55 ,REG );outb (0x55 ,REG ); +return 0 ; }static inline void superio_exit (void ) {outb (0x02 ,REG );outb (0x02 ,VAL ); -spin_unlock (&io_lock); +release_region (REG ,2 ); }static inline void it8712f_wdt_ping (void )
@@ -173,10 +179,12 @@ static int it8712f_wdt_get_status(void)return 0 ; } -static void it8712f_wdt_enable (void ) +static int it8712f_wdt_enable (void ) { printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); -superio_enter (); +if (superio_enter ()) +return -EBUSY ; +superio_select (LDN_GPIO );superio_outb (wdt_control_reg,WDT_CONTROL );
@@ -186,13 +194,17 @@ static void it8712f_wdt_enable(void)superio_exit ();it8712f_wdt_ping (); + +return 0 ; } -static void it8712f_wdt_disable (void ) +static int it8712f_wdt_disable (void ) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); -superio_enter (); +if (superio_enter ()) +return -EBUSY ; +superio_select (LDN_GPIO );superio_outb (0 ,WDT_CONFIG );
@@ -202,6 +214,7 @@ static void it8712f_wdt_disable(void)superio_outb (0 ,WDT_TIMEOUT );superio_exit (); +return 0 ; } static int it8712f_wdt_notify(struct notifier_block *this,
@@ -209,7 +222,8 @@ static int it8712f_wdt_notify(struct notifier_block *this, {if (code =SYS_HALT || code =SYS_POWER_OFF )if (!nowayout) -it8712f_wdt_disable (); +if (it8712f_wdt_disable ()) +return -EBUSY ;return NOTIFY_DONE ; }
@@ -259,7 +273,8 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,return -EFAULT ;return 0 ;case WDIOC_GETSTATUS : -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (LDN_GPIO ); value =it8712f_wdt_get_status ();
@@ -280,7 +295,8 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,if (value > (max_units *60 ))return -EINVAL ; margin = value; -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (LDN_GPIO );it8712f_wdt_update_margin ();
@@ -302,7 +318,8 @@ static int it8712f_wdt_open(struct inode *inode, struct file *file)/* only allow one at a time */ if (test_and_set_bit (0 , &wdt_open))return -EBUSY ; -it8712f_wdt_enable (); +if (it8712f_wdt_enable ()) +return -EBUSY ;return nonseekable_open (inode, file); }
@@ -313,7 +330,8 @@ static int it8712f_wdt_release(struct inode *inode, struct file *file)": watchdog device closed unexpectedly, will not" " disable the watchdog timer\n"); }else if (!nowayout) { -it8712f_wdt_disable (); +if (it8712f_wdt_disable ()) +return -EBUSY ; } expect_close =0 ;clear_bit (0 , &wdt_open);
@@ -341,7 +359,9 @@ static int __init it8712f_wdt_find(unsigned short *address)int err = -ENODEV ;int chip_type; -superio_enter (); +if (superio_enter ()) +return -EBUSY ; + chip_type =superio_inw (DEVID );if (chip_type !=IT8712F_DEVID ) goto exit;
@@ -382,8 +402,6 @@ static int __init it8712f_wdt_init(void) {int err =0 ; -spin_lock_init (&io_lock); -if (it8712f_wdt_find (&address))return -ENODEV ;
@@ -392,7 +410,8 @@ static int __init it8712f_wdt_init(void)return -EBUSY ; } -it8712f_wdt_disable (); +if (it8712f_wdt_disable ()) +return -EBUSY ; err =register_reboot_notifier (&it8712f_wdt_notifier);if (err) {
drivers/watchdog/it87_wdt.c +65 -54
299 lines not on this page · raw message
Signature · 7 lines
1.7.3.1 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [PATCH v7 1/2] Use "request_muxed_region" in it87 watchdog drivers
Quoted 80 lines · Nat Gurumoorthy
01 - Changes to it87 watchdog driver to use "
request_muxed_region" Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy.The use of the above macro makes it possible to get rid of spinlocks in
it8712f_wdt.candit87_wdt.cwatchdog drivers. This also greatly simplifies the implementation ofit87_wdt.cdriver."
superio_enter" will return an error if call to "request_muxed_region" fails.
Rest of the code change is to ripple an error return fromsuperio_enterto the top level.Signed-off-by Nat Gurumoorthy <[email protected]>---
drivers/watchdog/it8712f_wdt.c +16
-6@@ -51,7 +51,6 @@ MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");static unsigned long wdt_open;static unsigned expect_close; -static spinlock_t io_lock;static unsigned char revision;/* Dog Food address - We use the game port address */ @@ -121,20 +120,27 @@ static inline void superio_select(int ldn)outb (ldn,VAL ); } -static inline void superio_enter (void ) +static inline int +superio_enter (void ) { -spin_lock (&io_lock); +/* +* Try to reserve REG and REG + 1 for exclusive access. +*/ +if (!request_muxed_region (REG ,2 ,NAME )) +return -EBUSY ; +outb (0x87 ,REG );outb (0x01 ,REG );outb (0x55 ,REG );outb (0x55 ,REG ); +return 0 ; }static inline void superio_exit (void ) {outb (0x02 ,REG );outb (0x02 ,VAL ); -spin_unlock (&io_lock); +release_region (REG ,2 ); }static inline void it8712f_wdt_ping (void )@@ -173,10 +179,12 @@ static int it8712f_wdt_get_status(void)return 0 ; } -static void it8712f_wdt_enable (void ) +static int it8712f_wdt_enable (void ) { printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); -superio_enter (); +if (superio_enter ()) +return -EBUSY ; +superio_select (LDN_GPIO );superio_outb (wdt_control_reg,WDT_CONTROL );@@ -186,13 +194,17 @@ static void it8712f_wdt_enable(void)superio_exit ();it8712f_wdt_ping (); + +return 0 ;
drivers/watchdog/it8712f_wdt.c static void it8712f_wdt_enable(void) · line 206
Quoted 10 lines
drivers/watchdog/it8712f_wdt.c +3
-2} -static void it8712f_wdt_disable (void ) +static int it8712f_wdt_disable (void ) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;
If you lookk at other drivers implementing the same, you'll notice that the idea is to return the error code you get from superio_enter(), instead of replacing it with another one. Sure, it is in practice the same, but that is not the point.
Quoted 13 lines
drivers/watchdog/it8712f_wdt.c +2
-0+superio_select (LDN_GPIO );superio_outb (0 ,WDT_CONFIG );@@ -202,6 +214,7 @@ static void it8712f_wdt_disable(void)superio_outb (0 ,WDT_TIMEOUT );superio_exit (); +return 0 ; } static int it8712f_wdt_notify(struct notifier_block *this,
drivers/watchdog/it8712f_wdt.c static int it8712f_wdt_notify(struct notifier_block *this, · line 226
Quoted 6 lines
drivers/watchdog/it8712f_wdt.c +2
-1@@ -209,7 +222,8 @@ static int it8712f_wdt_notify(struct notifier_block *this, {if (code =SYS_HALT || code =SYS_POWER_OFF )if (!nowayout) -it8712f_wdt_disable (); +if (it8712f_wdt_disable ()) +return -EBUSY ;
That is not a valid return code for notifier calls. Sometimes one has to ignore an error code. Again, compare with other drivers what they do in this situation.
Quoted 170 lines
drivers/watchdog/it8712f_wdt.c +13
-8return NOTIFY_DONE ; }@@ -259,7 +273,8 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,return -EFAULT ;return 0 ;case WDIOC_GETSTATUS : -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (LDN_GPIO ); value =it8712f_wdt_get_status ();@@ -280,7 +295,8 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,if (value > (max_units *60 ))return -EINVAL ; margin = value; -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (LDN_GPIO );it8712f_wdt_update_margin ();@@ -302,7 +318,8 @@ static int it8712f_wdt_open(struct inode *inode, struct file *file)/* only allow one at a time */ if (test_and_set_bit (0 , &wdt_open))return -EBUSY ; -it8712f_wdt_enable (); +if (it8712f_wdt_enable ()) +return -EBUSY ;return nonseekable_open (inode, file); }@@ -313,7 +330,8 @@ static int it8712f_wdt_release(struct inode *inode, struct file *file)": watchdog device closed unexpectedly, will not" " disable the watchdog timer\n"); }else if (!nowayout) { -it8712f_wdt_disable (); +if (it8712f_wdt_disable ()) +return -EBUSY ; } expect_close =0 ;clear_bit (0 , &wdt_open);@@ -341,7 +359,9 @@ static int __init it8712f_wdt_find(unsigned short *address)int err = -ENODEV ;int chip_type; -superio_enter (); +if (superio_enter ()) +return -EBUSY ; + chip_type =superio_inw (DEVID );if (chip_type !=IT8712F_DEVID ) goto exit;@@ -382,8 +402,6 @@ static int __init it8712f_wdt_init(void) {int err =0 ; -spin_lock_init (&io_lock); -if (it8712f_wdt_find (&address))return -ENODEV ;@@ -392,7 +410,8 @@ static int __init it8712f_wdt_init(void)return -EBUSY ; } -it8712f_wdt_disable (); +if (it8712f_wdt_disable ()) +return -EBUSY ; err =register_reboot_notifier (&it8712f_wdt_notifier);if (err) {drivers/watchdog/it87_wdt.c +19
-16@@ -137,7 +137,6 @@static unsigned int base, gpact, ciract, max_units, chip_type;static unsigned long wdt_status; -static DEFINE_SPINLOCK (spinlock);static int nogameport =DEFAULT_NOGAMEPORT ;static int exclusive =DEFAULT_EXCLUSIVE ;@@ -163,18 +162,27 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default="/* Superio Chip */ -static inline void superio_enter (void ) +static inline int +superio_enter (void ) { +/* +* Try to reserve REG and REG + 1 for exclusive access. +*/ +if (!request_muxed_region (REG ,2 ,WATCHDOG_NAME )) +return -EBUSY ; +outb (0x87 ,REG );outb (0x01 ,REG );outb (0x55 ,REG );outb (0x55 ,REG ); +return 0 ; }static inline void superio_exit (void ) {outb (0x02 ,REG );outb (0x02 ,VAL ); +release_region (REG ,2 ); }static inline void superio_select (int ldn)@@ -255,12 +263,10 @@ static void wdt_keepalive(void)set_bit (WDTS_KEEPALIVE , &wdt_status); } -static void wdt_start (void ) +static int wdt_start (void ) { -unsigned long flags; - -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (GPIO );if (test_bit (WDTS_USE_GP , &wdt_status))@@ -270,15 +276,14 @@ static void wdt_start(void)wdt_update_timeout ();superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); + +return 0 ; } -static void wdt_stop (void ) +static int wdt_stop (void ) { -unsigned long flags; - -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (GPIO );superio_outb (0x00 ,WDTCTRL );@@ -288,7 +293,7 @@ static void wdt_stop(void)superio_outb (0x00 ,WDTVALMSB );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); +return 0 ; }/** @@ -303,8 +308,6 @@ static void wdt_stop(void)static int wdt_set_timeout (int t) { -unsigned long flags; -if (t <1 || t > max_units *60 )return -EINVAL ;
drivers/watchdog/it87_wdt.c static int wdt_set_timeout(int t) · line 322
Quoted 9 lines
drivers/watchdog/it87_wdt.c +3
-2@@ -313,14 +316,14 @@ static int wdt_set_timeout(int t)else timeout = t; -spin_lock_irqsave (&spinlock, flags);if (test_bit (WDTS_TIMER_RUN , &wdt_status)) { -superio_enter (); +if (superio_enter ()) +return -EBUSY ; +
I don't think you can do that here. You are moving the lock, meaning test_bit is no longer protected by the lock.
Quoted 96 lines
drivers/watchdog/it87_wdt.c +28
-12superio_select (GPIO );wdt_update_timeout ();superio_exit (); } -spin_unlock_irqrestore (&spinlock, flags);return 0 ; }@@ -339,12 +342,10 @@ static int wdt_set_timeout(int t)static int wdt_get_status (int *status) { -unsigned long flags; - *status =0 ;if (testmode) { -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (GPIO );if (superio_inb (WDTCTRL ) &WDT_ZERO ) {superio_outb (0x00 ,WDTCTRL );@@ -353,7 +354,6 @@ static int wdt_get_status(int *status) }superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }if (test_and_clear_bit (WDTS_KEEPALIVE , &wdt_status)) *status |=WDIOF_KEEPALIVEPING ;@@ -381,7 +381,12 @@ static int wdt_open(struct inode *inode, struct file *file)if (!test_and_set_bit (WDTS_TIMER_RUN , &wdt_status)) {if (nowayout && !test_and_set_bit (WDTS_LOCKED , &wdt_status))__module_get (THIS_MODULE ); -wdt_start (); +if (wdt_start ()) { +clear_bit (WDTS_LOCKED , &wdt_status); +clear_bit (WDTS_TIMER_RUN , &wdt_status); +clear_bit (WDTS_DEV_OPEN , &wdt_status); +return -EBUSY ; + } }return nonseekable_open (inode, file); }@@ -403,7 +408,15 @@ static int wdt_release(struct inode *inode, struct file *file) {if (test_bit (WDTS_TIMER_RUN , &wdt_status)) {if (test_and_clear_bit (WDTS_EXPECTED , &wdt_status)) { -wdt_stop (); +if (wdt_stop ()) { +/* +* Stop failed. Just keep the watchdog alive +* and hope nothing bad happens. +*/ +set_bit (WDTS_EXPECTED , &wdt_status); +wdt_keepalive (); +return -EBUSY ; + }clear_bit (WDTS_TIMER_RUN , &wdt_status); }else {wdt_keepalive ();@@ -484,7 +497,8 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) &ident, sizeof(ident)) ? -EFAULT : 0;case WDIOC_GETSTATUS : -wdt_get_status (&status); +if (wdt_get_status (&status)) +return -EBUSY ;return put_user (status, uarg.i);case WDIOC_GETBOOTSTATUS :@@ -501,13 +515,19 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)switch (new_options) {case WDIOS_DISABLECARD :if (test_bit (WDTS_TIMER_RUN , &wdt_status)) -wdt_stop (); +if (wdt_stop ()) +return -EBUSY ; +clear_bit (WDTS_TIMER_RUN , &wdt_status);return 0 ;case WDIOS_ENABLECARD : -if (!test_and_set_bit (WDTS_TIMER_RUN , &wdt_status)) -wdt_start (); +if (!test_and_set_bit (WDTS_TIMER_RUN , &wdt_status)) { +if (wdt_start ()) { +clear_bit (WDTS_TIMER_RUN , &wdt_status); +return -EBUSY ; + } + }return 0 ;default :
drivers/watchdog/it87_wdt.c static int wdt_notify_sys(struct notifier_block *this, unsigned long code, · line 556
Quoted 6 lines
drivers/watchdog/it87_wdt.c +2
-1@@ -532,7 +552,8 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) {if (code =SYS_DOWN || code =SYS_HALT ) -wdt_stop (); +if (wdt_stop ()) +return -EBUSY ;
-EBUSY is not a valid return code here.
Quoted 95 lines
drivers/watchdog/it87_wdt.c +11
-17return NOTIFY_DONE ; }@@ -560,16 +581,15 @@ static int __init it87_wdt_init(void)int rc =0 ;int try_gameport = !nogameport;u8 chip_rev; -unsigned long flags; wdt_status =0 ; -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ; + chip_type =superio_inw (CHIPID ); chip_rev =superio_inb (CHIPREV ) &0x0f ;superio_exit (); -spin_unlock_irqrestore (&spinlock, flags);switch (chip_type) {case IT8702_ID :@@ -603,8 +623,8 @@ static int __init it87_wdt_init(void)return -ENODEV ; } -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (GPIO );superio_outb (WDT_TOV1 ,WDTCFG );@@ -621,14 +641,12 @@ static int __init it87_wdt_init(void) gpact =superio_inb (ACTREG );superio_outb (0x01 ,ACTREG );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags);if (request_region (base,1 ,WATCHDOG_NAME ))set_bit (WDTS_USE_GP , &wdt_status);else rc = -EIO ; }else {superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }/* If we haven't Gameport support, try to get CIR support */ @@ -646,8 +664,8 @@ static int __init it87_wdt_init(void) goto err_out; } base =CIR_BASE ; -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (CIR );superio_outw (base,BASEREG );@@ -660,7 +678,6 @@ static int __init it87_wdt_init(void) }superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }if (timeout <1 || timeout > max_units *60 ) {@@ -711,21 +728,19 @@ err_out_reboot: err_out_region:release_region (base,test_bit (WDTS_USE_GP , &wdt_status) ?1 :8 );if (!test_bit (WDTS_USE_GP , &wdt_status)) { -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (CIR );superio_outb (ciract,ACTREG );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); } err_out:if (try_gameport) { -spin_lock_irqsave (&spinlock, flags); -superio_enter (); +if (superio_enter ()) +return -EBUSY ;superio_select (GAMEPORT );superio_outb (gpact,ACTREG );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }return rc;
drivers/watchdog/it87_wdt.c err_out: · line 752
Quoted 7 lines
drivers/watchdog/it87_wdt.c +2
-2@@ -733,11 +748,9 @@ err_out: static void __exit it87_wdt_exit(void) { -unsigned long flags; -int nolock; +if (superio_enter ()) +return ;
Assumption is that you unregister the device. So even if superio_select fails, you still have to execute the rest of the code.
Quoted 18 lines
drivers/watchdog/it87_wdt.c +0
-5- nolock = !spin_trylock_irqsave (&spinlock, flags); -superio_enter ();superio_select (GPIO );superio_outb (0x00 ,WDTCTRL );superio_outb (0x00 ,WDTCFG );@@ -752,8 +765,6 @@ static void __exit it87_wdt_exit(void)superio_outb (ciract,ACTREG ); }superio_exit (); -if (!nolock) -spin_unlock_irqrestore (&spinlock, flags);misc_deregister (&wdt_miscdev);unregister_reboot_notifier (&wdt_notifier); --1.7.3.1
Signature · 8 lines
Guenter Roeck Distinguished Engineer PDU IP Systems _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [PATCH v7 1/2] Use "request_muxed_region" in it87 watchdog drivers
Guenter,
Quoted 14 lines · Guenter Roeck
Quoted 14 lines
/**
drivers/watchdog/it87_wdt.c +0
-2@@ -303,8 +308,6 @@ static void wdt_stop(void) static int wdt_set_timeout(int t) { - unsigned long flags; - if (t < 1 || t > max_units * 60) return -EINVAL;@@ -313,14 +316,14 @@ static int wdt_set_timeout(int t)else
timeout = t;
Quoted 9 lines
Quoted 6 lines
-
spin_lock_irqsave(&spinlock, flags); if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
-superio_enter();
+ if (superio_enter())
+ return-EBUSY;
+I don't think you can do that here. You are moving the lock, meaning
test_bitis no longer protected by the lock.
I am not sure I am in agreement with your here. If you look at other places in the original driver I see sections of code in "wdt_ioctl" that look as follows:
case WDIOC_SETOPTIONS:
if (get_user(new_options, uarg.i))
return -EFAULT;
switch (new_options) {
case WDIOS_DISABLECARD:
if (test_bit(WDTS_TIMER_RUN, &wdt_status))
wdt_stop();
clear_bit(WDTS_TIMER_RUN, &wdt_status);
return 0;
case WDIOS_ENABLECARD:
if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status))
wdt_start();
return 0;
default:
return -EFAULT;
}They have run through manipulating the "WDTS_TIMER_RUN" bit in wdt_status without touching the spinlock. "wdt_stop" does acquire the spinlock before touching the hardware through superio_enter. It seems to me that the original writers of this driver were using the spinlock to isolate access to the hardware and we will be achieving the same by the use of "request_muxed_region" call from superio_enter.
I am fixing the rest of the issues pointed out by you and am hoping to ship out a patch by the end of the week.
Regards
Nat
Quoted 224 lines
Quoted 96 lines
superio_select(GPIO);
wdt_update_timeout();
superio_exit();
}
-spin_unlock_irqrestore(&spinlock, flags);
return 0;
}drivers/watchdog/it87_wdt.c +17
-7@@ -339,12 +342,10 @@ static int wdt_set_timeout(int t) static int wdt_get_status(int *status) { - unsigned long flags; - *status = 0; if (testmode) { - spin_lock_irqsave(&spinlock, flags); - superio_enter(); + if (superio_enter()) + return -EBUSY; superio_select(GPIO); if (superio_inb(WDTCTRL) & WDT_ZERO) { superio_outb(0x00, WDTCTRL);@@ -353,7 +354,6 @@ static int wdt_get_status(int *status) } superio_exit(); - spin_unlock_irqrestore(&spinlock, flags); } if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status)) *status |= WDIOF_KEEPALIVEPING;@@ -381,7 +381,12 @@ static int wdt_open(struct inode *inode, struct file *file) if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status)) __module_get(THIS_MODULE); - wdt_start(); + if (wdt_start()) { + clear_bit(WDTS_LOCKED, &wdt_status); + clear_bit(WDTS_TIMER_RUN, &wdt_status); + clear_bit(WDTS_DEV_OPEN, &wdt_status); + return -EBUSY; + } } return nonseekable_open(inode, file); }@@ -403,7 +408,15 @@ static int wdt_release(struct inode *inode, struct file *file) { if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) { - wdt_stop(); + if (wdt_stop()) { + /* + * Stop failed. Just keep the watchdog alive + * and hope nothing bad happens. + */ + set_bit(WDTS_EXPECTED, &wdt_status); + wdt_keepalive(); + return -EBUSY; + } clear_bit(WDTS_TIMER_RUN, &wdt_status); } else { wdt_keepalive();@@ -484,7 +497,8 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) &ident, sizeof(ident)) ? -EFAULT : 0;case
WDIOC_GETSTATUS:
-wdt_get_status(&status);
+ if (wdt_get_status(&status))
+ return-EBUSY;
returnput_user(status, uarg.i);case
WDIOC_GETBOOTSTATUS:drivers/watchdog/it87_wdt.c +0
-0@@ -501,13 +515,19 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (new_options) {case
WDIOS_DISABLECARD:
if (test_bit(WDTS_TIMER_RUN, &wdt_status))
-wdt_stop();
+ if (wdt_stop())
+ return-EBUSY; +
clear_bit(WDTS_TIMER_RUN, &wdt_status); return 0;case
WDIOS_ENABLECARD:
- if (!test_and_set_bit(WDTS_TIMER_RUN,&wdt_status))
-wdt_start();
+ if (!test_and_set_bit(WDTS_TIMER_RUN,&wdt_status)) {
+ if (wdt_start()) {
+clear_bit(WDTS_TIMER_RUN, &wdt_status);
+ return-EBUSY;
+ }
+ }
return 0;default:
drivers/watchdog/it87_wdt.c static int wdt_notify_sys(struct notifier_block *this, unsigned long code, · line 556
Quoted 6 lines
drivers/watchdog/it87_wdt.c +2
-1@@ -532,7 +552,8 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { if (code = SYS_DOWN || code = SYS_HALT) - wdt_stop(); + if (wdt_stop()) + return -EBUSY;
-EBUSYis not a valid return code here.Quoted 95 lines
drivers/watchdog/it87_wdt.c +3
-4return NOTIFY_DONE; }@@ -560,16 +581,15 @@ static int __init it87_wdt_init(void) int rc = 0; int try_gameport = !nogameport; u8 chip_rev; - unsigned long flags; wdt_status = 0; - spin_lock_irqsave(&spinlock, flags); - superio_enter(); + if (superio_enter()) + return -EBUSY; + chip_type = superio_inw(CHIPID); chip_rev = superio_inb(CHIPREV) & 0x0f; superio_exit(); - spin_unlock_irqrestore(&spinlock, flags); switch (chip_type) {case
IT8702_ID:drivers/watchdog/it87_wdt.c +2
-3@@ -603,8 +623,8 @@ static int __init it87_wdt_init(void) return -ENODEV; } - spin_lock_irqsave(&spinlock, flags); - superio_enter(); + if (superio_enter()) + return -EBUSY; superio_select(GPIO); superio_outb(WDT_TOV1, WDTCFG);@@ -621,14 +641,12 @@ static int __init it87_wdt_init(void) gpact = superio_inb(ACTREG); superio_outb(0x01, ACTREG); superio_exit(); - spin_unlock_irqrestore(&spinlock, flags); if (request_region(base, 1, WATCHDOG_NAME)) set_bit(WDTS_USE_GP, &wdt_status);else
rc =-EIO;
} else {
superio_exit();
-spin_unlock_irqrestore(&spinlock, flags); }/* If we haven't Gameport support, try to get CIR support */
drivers/watchdog/it87_wdt.c +2
-3@@ -646,8 +664,8 @@ static int __init it87_wdt_init(void) goto err_out; } base = CIR_BASE; - spin_lock_irqsave(&spinlock, flags); - superio_enter(); + if (superio_enter()) + return -EBUSY; superio_select(CIR); superio_outw(base, BASEREG);@@ -660,7 +678,6 @@ static int __init it87_wdt_init(void) } superio_exit(); - spin_unlock_irqrestore(&spinlock, flags); } if (timeout < 1 || timeout > max_units * 60) {@@ -711,21 +728,19 @@ err_out_reboot:err_out_region:
release_region(base, test_bit(WDTS_USE_GP, &wdt_status) ? 1 : 8); if (!test_bit(WDTS_USE_GP,&wdt_status)) {
-spin_lock_irqsave(&spinlock, flags);
-superio_enter();
+ if (superio_enter())
+ return-EBUSY;
superio_select(CIR);
superio_outb(ciract, ACTREG);
superio_exit();
-spin_unlock_irqrestore(&spinlock, flags);
}
err_out:
if (try_gameport) {
-spin_lock_irqsave(&spinlock, flags);
-superio_enter();
+ if (superio_enter())
+ return-EBUSY;superio_select(GAMEPORT);
superio_outb(gpact, ACTREG);
superio_exit();
-spin_unlock_irqrestore(&spinlock, flags);
}return rc;
drivers/watchdog/it87_wdt.c err_out: · line 752
Quoted 7 lines
drivers/watchdog/it87_wdt.c +2
-2@@ -733,11 +748,9 @@ err_out: static void __exit it87_wdt_exit(void) { - unsigned long flags; - int nolock; + if (superio_enter()) + return;Assumption is that you unregister the device. So even if
superio_selectfails, you still have to execute the rest of the code.Quoted 13 lines
drivers/watchdog/it87_wdt.c +0
-4- nolock = !spin_trylock_irqsave(&spinlock, flags); - superio_enter(); superio_select(GPIO); superio_outb(0x00, WDTCTRL); superio_outb(0x00, WDTCFG);@@ -752,8 +765,6 @@ static void __exit it87_wdt_exit(void) superio_outb(ciract, ACTREG); } superio_exit(); - if (!nolock) - spin_unlock_irqrestore(&spinlock, flags);
Quoted 10 lines
Quoted 5 lines
drivers/watchdog/it87_wdt.c +0
-1misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); --1.7.3.1
--
Guenter Roeck
Distinguished Engineer
PDU IP Systems
--
Regards
Nat Gurumoorthy AB6SJ
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [PATCH v7 1/2] Use "request_muxed_region" in it87 watchdog drivers
Quoted 50 lines · Natarajan Gurumoorthy
Guenter,
Quoted 14 lines · Guenter Roeck
Quoted 14 lines
/**
drivers/watchdog/it87_wdt.c +0
-2@@ -303,8 +308,6 @@ static void wdt_stop(void)static int wdt_set_timeout (int t) { -unsigned long flags; -if (t <1 || t > max_units *60 )return -EINVAL ;@@ -313,14 +316,14 @@ static int wdt_set_timeout(int t)else timeout = t;Quoted 9 lines
drivers/watchdog/it87_wdt.c static int wdt_set_timeout(int t) · line 322
Quoted 6 lines
drivers/watchdog/it87_wdt.c +3
-2-spin_lock_irqsave (&spinlock, flags);if (test_bit (WDTS_TIMER_RUN , &wdt_status)) { -superio_enter (); +if (superio_enter ()) +return -EBUSY ; +I don't think you can do that here. You are moving the lock, meaning
test_bitis no longer protected by the lock.I am not sure I am in agreement with your here. If you look at other places in the original driver I see sections of code in "
wdt_ioctl" that look as follows:case WDIOC_SETOPTIONS: if (get_user(new_options, uarg.i)) return -EFAULT; switch (new_options) { case WDIOS_DISABLECARD: if (test_bit(WDTS_TIMER_RUN, &wdt_status)) wdt_stop(); clear_bit(WDTS_TIMER_RUN, &wdt_status); return 0; case WDIOS_ENABLECARD: if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) wdt_start(); return 0; default: return -EFAULT; }
Quoted 7 lines
They have run through manipulating the "
WDTS_TIMER_RUN" bit inwdt_statuswithout touching the spinlock. "wdt_stop" does acquire the spinlock before touching the hardware throughsuperio_enter. It seems to me that the original writers of this driver were using the spinlock to isolate access to the hardware and we will be achieving the same by the use of "request_muxed_region" call fromsuperio_enter.
Agreed. Thanks for the clarification.
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
PATCH v7 2/2 Use "request_muxed_region" in it87 hwmon drivers
In reply to Nat Gurumoorthy02 - Chages to hwmon it87 driver to use "request_muxed_region" Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy. "superio_enter" will return an error if call to "request_muxed_region" fails. Rest of the code change is to ripple an error return from superio_enter to the top level.
---
drivers/hwmon/it87.c +12 -2
@@ -108,13 +108,20 @@ superio_select(int ldn)outb (ldn,VAL ); } -static inline void +static inline int superio_enter (void ) { +/* +* Try to reserve REG and REG + 1 for exclusive access. +*/ +if (!request_muxed_region (REG ,2 ,DRVNAME )) +return -EBUSY ; +outb (0x87 ,REG );outb (0x01 ,REG );outb (0x55 ,REG );outb (0x55 ,REG ); +return 0 ; } static inline void
@@ -122,6 +129,7 @@ superio_exit(void) {outb (0x02 ,REG );outb (0x02 ,VAL ); +release_region (REG ,2 ); }/* Logical device 4 registers */
@@ -1546,7 +1554,9 @@ static int __init it87_find(unsigned short *address,u16 chip_type;const char *board_vendor, *board_name; -superio_enter (); +if (superio_enter ()) +return -EBUSY ; + chip_type = force_id ? force_id :superio_inw (DEVID );switch (chip_type) {
Signature · 7 lines
1.7.3.1 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
All looks good to me.
Parport can also be made to behave politely and I'll post a patch for that.