Skip to contentSkip to conversation

GPIO: Tegra2: add GPIO driver for Tegra2

PATCH Superseded Tom Warren 2 participants 5 messages May 2, 2011

Subsystems (3)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Tom Warren

author
#0 lore raw

v2 cover GPIO: Tegra2: add GPIO driver for Tegra2

This patchset adds a GPIO driver for Tegra2 SoC, and enables it for all boards

Changes in V2:
- use 'gpio_pin' enum in gpio.h (Simon Glass review request)
- change 'GPIO_PORT8' to 'GPIO_FULLPORT' (Simon Glass request)
- change 'offset' to 'pin' globally
- enable GPIO for all boards (tegra2-common.h)

Tom Warren (2):
GPIO: Tegra2: add GPIO driver for Tegra2
arm: Tegra2: GPIO: enable GPIO for Tegra2 boards

 arch/arm/include/asm/arch-tegra2/gpio.h |  244 ++++++++++++++++++++++++-
 drivers/gpio/Makefile                   |    1 +
 drivers/gpio/tegra2_gpio.c              |  299 +++++++++++++++++++++++++++++++
 include/configs/tegra2-common.h         |    2 +
 4 files changed, 539 insertions(+), 7 deletions(-)
 create mode 100644 drivers/gpio/tegra2_gpio.c
Signature · 1 line
1.7.5
author
#1 lore raw

PATCH v2 1/2 GPIO: Tegra2: add GPIO driver for Tegra2

---
Changes in V2:
- use 'gpio_pin' enum in gpio.h (Simon Glass review request)
- change 'GPIO_PORT8' to 'GPIO_FULLPORT' (Simon Glass request)
- change 'offset' to 'pin' globally

 arch/arm/include/asm/arch-tegra2/gpio.h |  244 ++++++++++++++++++++++++-
 drivers/gpio/Makefile                   |    1 +
 drivers/gpio/tegra2_gpio.c              |  299 +++++++++++++++++++++++++++++++
 3 files changed, 537 insertions(+), 7 deletions(-)
 create mode 100644 drivers/gpio/tegra2_gpio.c
arch/arm/include/asm/arch-tegra2/gpio.h +237 -7
index 0fb8f0d..e55305a 100644
@@ -45,15 +45,245 @@ struct gpio_ctlr {
 	struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
 };
 
-#define GPIO_BANK(x)	((x) >> 5)
-#define GPIO_PORT(x)	(((x) >> 3) & 0x3)
-#define GPIO_BIT(x)	((x) & 0x7)
+#define GPIO_BANK(x)		((x) >> 5)
+#define GPIO_PORT(x)		(((x) >> 3) & 0x3)
+#define GPIO_FULLPORT(x)	((x) >> 3)
+#define GPIO_BIT(x)		((x) & 0x7)
+
+enum gpio_pin {
+	GPIO_PA0 = 0,	/* pin 0 */
+	GPIO_PA1,
+	GPIO_PA2,
+	GPIO_PA3,
+	GPIO_PA4,
+	GPIO_PA5,
+	GPIO_PA6,
+	GPIO_PA7,
+	GPIO_PB0,	/* pin 8 */
+	GPIO_PB1,
+	GPIO_PB2,
+	GPIO_PB3,
+	GPIO_PB4,
+	GPIO_PB5,
+	GPIO_PB6,
+	GPIO_PB7,
+	GPIO_PC0,	/* pin 16 */
+	GPIO_PC1,
+	GPIO_PC2,
+	GPIO_PC3,
+	GPIO_PC4,
+	GPIO_PC5,
+	GPIO_PC6,
+	GPIO_PC7,
+	GPIO_PD0,	/* pin 24 */
+	GPIO_PD1,
+	GPIO_PD2,
+	GPIO_PD3,
+	GPIO_PD4,
+	GPIO_PD5,
+	GPIO_PD6,
+	GPIO_PD7,
+	GPIO_PE0,	/* pin 32 */
+	GPIO_PE1,
+	GPIO_PE2,
+	GPIO_PE3,
+	GPIO_PE4,
+	GPIO_PE5,
+	GPIO_PE6,
+	GPIO_PE7,
+	GPIO_PF0,	/* pin 40 */
+	GPIO_PF1,
+	GPIO_PF2,
+	GPIO_PF3,
+	GPIO_PF4,
+	GPIO_PF5,
+	GPIO_PF6,
+	GPIO_PF7,
+	GPIO_PG0,	/* pin 48 */
+	GPIO_PG1,
+	GPIO_PG2,
+	GPIO_PG3,
+	GPIO_PG4,
+	GPIO_PG5,
+	GPIO_PG6,
+	GPIO_PG7,
+	GPIO_PH0,	/* pin 56 */
+	GPIO_PH1,
+	GPIO_PH2,
+	GPIO_PH3,
+	GPIO_PH4,
+	GPIO_PH5,
+	GPIO_PH6,
+	GPIO_PH7,
+	GPIO_PI0,	/* pin 64 */
+	GPIO_PI1,
+	GPIO_PI2,
+	GPIO_PI3,
+	GPIO_PI4,
+	GPIO_PI5,
+	GPIO_PI6,
+	GPIO_PI7,
+	GPIO_PJ0,	/* pin 72 */
+	GPIO_PJ1,
+	GPIO_PJ2,
+	GPIO_PJ3,
+	GPIO_PJ4,
+	GPIO_PJ5,
+	GPIO_PJ6,
+	GPIO_PJ7,
+	GPIO_PK0,	/* pin 80 */
+	GPIO_PK1,
+	GPIO_PK2,
+	GPIO_PK3,
+	GPIO_PK4,
+	GPIO_PK5,
+	GPIO_PK6,
+	GPIO_PK7,
+	GPIO_PL0,	/* pin 88 */
+	GPIO_PL1,
+	GPIO_PL2,
+	GPIO_PL3,
+	GPIO_PL4,
+	GPIO_PL5,
+	GPIO_PL6,
+	GPIO_PL7,
+	GPIO_PM0,	/* pin 96 */
+	GPIO_PM1,
+	GPIO_PM2,
+	GPIO_PM3,
+	GPIO_PM4,
+	GPIO_PM5,
+	GPIO_PM6,
+	GPIO_PM7,
+	GPIO_PN0,	/* pin 104 */
+	GPIO_PN1,
+	GPIO_PN2,
+	GPIO_PN3,
+	GPIO_PN4,
+	GPIO_PN5,
+	GPIO_PN6,
+	GPIO_PN7,
+	GPIO_PO0,	/* pin 112 */
+	GPIO_PO1,
+	GPIO_PO2,
+	GPIO_PO3,
+	GPIO_PO4,
+	GPIO_PO5,
+	GPIO_PO6,
+	GPIO_PO7,
+	GPIO_PP0,	/* pin 120 */
+	GPIO_PP1,
+	GPIO_PP2,
+	GPIO_PP3,
+	GPIO_PP4,
+	GPIO_PP5,
+	GPIO_PP6,
+	GPIO_PP7,
+	GPIO_PQ0,	/* pin 128 */
+	GPIO_PQ1,
+	GPIO_PQ2,
+	GPIO_PQ3,
+	GPIO_PQ4,
+	GPIO_PQ5,
+	GPIO_PQ6,
+	GPIO_PQ7,
+	GPIO_PR0,	/* pin 136 */
+	GPIO_PR1,
+	GPIO_PR2,
+	GPIO_PR3,
+	GPIO_PR4,
+	GPIO_PR5,
+	GPIO_PR6,
+	GPIO_PR7,
+	GPIO_PS0,	/* pin 144 */
+	GPIO_PS1,
+	GPIO_PS2,
+	GPIO_PS3,
+	GPIO_PS4,
+	GPIO_PS5,
+	GPIO_PS6,
+	GPIO_PS7,
+	GPIO_PT0,	/* pin 152 */
+	GPIO_PT1,
+	GPIO_PT2,
+	GPIO_PT3,
+	GPIO_PT4,
+	GPIO_PT5,
+	GPIO_PT6,
+	GPIO_PT7,
+	GPIO_PU0,	/* pin 160 */
+	GPIO_PU1,
+	GPIO_PU2,
+	GPIO_PU3,
+	GPIO_PU4,
+	GPIO_PU5,
+	GPIO_PU6,
+	GPIO_PU7,
+	GPIO_PV0,	/* pin 168 */
+	GPIO_PV1,
+	GPIO_PV2,
+	GPIO_PV3,
+	GPIO_PV4,
+	GPIO_PV5,
+	GPIO_PV6,
+	GPIO_PV7,
+	GPIO_PW0,	/* pin 176 */
+	GPIO_PW1,
+	GPIO_PW2,
+	GPIO_PW3,
+	GPIO_PW4,
+	GPIO_PW5,
+	GPIO_PW6,
+	GPIO_PW7,
+	GPIO_PX0,	/* pin 184 */
+	GPIO_PX1,
+	GPIO_PX2,
+	GPIO_PX3,
+	GPIO_PX4,
+	GPIO_PX5,
+	GPIO_PX6,
+	GPIO_PX7,
+	GPIO_PY0,	/* pin 192 */
+	GPIO_PY1,
+	GPIO_PY2,
+	GPIO_PY3,
+	GPIO_PY4,
+	GPIO_PY5,
+	GPIO_PY6,
+	GPIO_PY7,
+	GPIO_PZ0,	/* pin 200 */
+	GPIO_PZ1,
+	GPIO_PZ2,
+	GPIO_PZ3,
+	GPIO_PZ4,
+	GPIO_PZ5,
+	GPIO_PZ6,
+	GPIO_PZ7,
+	GPIO_PAA0,	/* pin 208 */
+	GPIO_PAA1,
+	GPIO_PAA2,
+	GPIO_PAA3,
+	GPIO_PAA4,
+	GPIO_PAA5,
+	GPIO_PAA6,
+	GPIO_PAA7,
+	GPIO_PBB0,	/* pin 216 */
+	GPIO_PBB1,
+	GPIO_PBB2,
+	GPIO_PBB3,
+	GPIO_PBB4,
+	GPIO_PBB5,
+	GPIO_PBB6,
+	GPIO_PBB7,	/* pin 223 */
+};
 
 /*
- * GPIO_PI3 = Port I = 8, bit = 3.
- * Seaboard: used for UART/SPI selection
- * Harmony: not used
+ * Tegra2-specific GPIO API
  */
-#define GPIO_PI3	((8 << 3) | 3)
+
+int gpio_direction_input(int gp);
+int gpio_direction_output(int gp, int value);
+int gpio_get_value(int gp);
+void gpio_set_value(int gp, int value);
 
 #endif	/* TEGRA2_GPIO_H_ */
drivers/gpio/Makefile +1 -0
index a5fa2b5..1e3ae11 100644
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_MARVELL_MFP)	+= mvmfp.o
 COBJS-$(CONFIG_MXC_GPIO)	+= mxc_gpio.o
 COBJS-$(CONFIG_PCA953X)		+= pca953x.o
 COBJS-$(CONFIG_S5P)		+= s5p_gpio.o
+COBJS-$(CONFIG_TEGRA2_GPIO)	+= tegra2_gpio.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
drivers/gpio/tegra2_gpio.c new file +299 -0

299 lines not on this page · raw message

Signature · 1 line
1.7.5
#2 lore raw

PATCH v2 1/2 GPIO: Tegra2: add GPIO driver for Tegra2

drivers/gpio/tegra2_gpio.c line 287

Quoted 2 lines · On Monday, May 02, 2011 18:45:47 Tom Warren wrote:
drivers/gpio/tegra2_gpio.c new file +2 -0
+U_BOOT_CMD(
+	gpio,	5,	1,	do_gpio,

looks to me like you're duplicating a lot of code that already exists in common/cmd_gpio.c
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110502/8932faa2/attachment.pgp

author
#3 lore raw

PATCH v2 1/2 GPIO: Tegra2: add GPIO driver for Tegra2

Mike,

Quoted 8 lines · Mike Frysinger
Quoted 2 lines · On Monday, May 02, 2011 18:45:47 Tom Warren wrote:

+U_BOOT_CMD(
+ ? ? gpio, ? 5, ? ? ?1, ? ? ?do_gpio,

looks to me like you're duplicating a lot of code that already exists in common/cmd_gpio.c
-mike

Possible - this was ported from another GPIO driver back in v2009.11 days. I'll take a look at cmd_gpio.c.

Thanks,

Tom

author
#4 lore raw

PATCH v2 2/2 arm: Tegra2: GPIO: enable GPIO for Tegra2 boards

In reply to Tom Warren

---
Changes in V2:
- enable GPIO for all boards (tegra2-common.h)

 include/configs/tegra2-common.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/tegra2-common.h +2 -0
index febce35..5260d1f 100644
@@ -160,4 +160,6 @@
 						CONFIG_SYS_INIT_RAM_SIZE - \
 						GENERATED_GBL_DATA_SIZE)
 
+#define CONFIG_TEGRA2_GPIO
+#define CONFIG_CMD_TEGRA2_GPIO_INFO
 #endif /* __TEGRA2_COMMON_H */
Signature · 1 line
1.7.5