GPIO: Tegra2: add GPIO driver for Tegra2
Subsystems (3)
v2 cover GPIO: Tegra2: add GPIO driver for Tegra2
This patchset adds a GPIO driver for Tegra2 SoC, and enables it for all boards
Changes in V2:
- use 'gpio_pin' enum in gpio.h (Simon Glass review request)
- change 'GPIO_PORT8' to 'GPIO_FULLPORT' (Simon Glass request)
- change 'offset' to 'pin' globally
- enable GPIO for all boards (tegra2-common.h)
Tom Warren (2):
GPIO: Tegra2: add GPIO driver for Tegra2
arm: Tegra2: GPIO: enable GPIO for Tegra2 boards
arch/arm/include/asm/arch-tegra2/gpio.h | 244 ++++++++++++++++++++++++- drivers/gpio/Makefile | 1 + drivers/gpio/tegra2_gpio.c | 299 +++++++++++++++++++++++++++++++ include/configs/tegra2-common.h | 2 + 4 files changed, 539 insertions(+), 7 deletions(-) create mode 100644 drivers/gpio/tegra2_gpio.c
Signature · 1 line
1.7.5
PATCH v2 1/2 GPIO: Tegra2: add GPIO driver for Tegra2
---
Changes in V2:
- use 'gpio_pin' enum in gpio.h (Simon Glass review request)
- change 'GPIO_PORT8' to 'GPIO_FULLPORT' (Simon Glass request)
- change 'offset' to 'pin' globally
arch/arm/include/asm/arch-tegra2/gpio.h | 244 ++++++++++++++++++++++++- drivers/gpio/Makefile | 1 + drivers/gpio/tegra2_gpio.c | 299 +++++++++++++++++++++++++++++++ 3 files changed, 537 insertions(+), 7 deletions(-) create mode 100644 drivers/gpio/tegra2_gpio.c
arch/arm/include/asm/arch-tegra2/gpio.h +237 -7
@@ -45,15 +45,245 @@ struct gpio_ctlr {struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS ]; }; -#define GPIO_BANK (x) ((x) >> 5) -#define GPIO_PORT (x) (((x) >> 3) & 0x3) -#define GPIO_BIT (x) ((x) & 0x7) +#define GPIO_BANK (x) ((x) >> 5) +#define GPIO_PORT (x) (((x) >> 3) & 0x3) +#define GPIO_FULLPORT (x) ((x) >> 3) +#define GPIO_BIT (x) ((x) & 0x7) + +enum gpio_pin { +GPIO_PA0 =0 ,/* pin 0 */ +GPIO_PA1 , +GPIO_PA2 , +GPIO_PA3 , +GPIO_PA4 , +GPIO_PA5 , +GPIO_PA6 , +GPIO_PA7 , +GPIO_PB0 ,/* pin 8 */ +GPIO_PB1 , +GPIO_PB2 , +GPIO_PB3 , +GPIO_PB4 , +GPIO_PB5 , +GPIO_PB6 , +GPIO_PB7 , +GPIO_PC0 ,/* pin 16 */ +GPIO_PC1 , +GPIO_PC2 , +GPIO_PC3 , +GPIO_PC4 , +GPIO_PC5 , +GPIO_PC6 , +GPIO_PC7 , +GPIO_PD0 ,/* pin 24 */ +GPIO_PD1 , +GPIO_PD2 , +GPIO_PD3 , +GPIO_PD4 , +GPIO_PD5 , +GPIO_PD6 , +GPIO_PD7 , +GPIO_PE0 ,/* pin 32 */ +GPIO_PE1 , +GPIO_PE2 , +GPIO_PE3 , +GPIO_PE4 , +GPIO_PE5 , +GPIO_PE6 , +GPIO_PE7 , +GPIO_PF0 ,/* pin 40 */ +GPIO_PF1 , +GPIO_PF2 , +GPIO_PF3 , +GPIO_PF4 , +GPIO_PF5 , +GPIO_PF6 , +GPIO_PF7 , +GPIO_PG0 ,/* pin 48 */ +GPIO_PG1 , +GPIO_PG2 , +GPIO_PG3 , +GPIO_PG4 , +GPIO_PG5 , +GPIO_PG6 , +GPIO_PG7 , +GPIO_PH0 ,/* pin 56 */ +GPIO_PH1 , +GPIO_PH2 , +GPIO_PH3 , +GPIO_PH4 , +GPIO_PH5 , +GPIO_PH6 , +GPIO_PH7 , +GPIO_PI0 ,/* pin 64 */ +GPIO_PI1 , +GPIO_PI2 , +GPIO_PI3 , +GPIO_PI4 , +GPIO_PI5 , +GPIO_PI6 , +GPIO_PI7 , +GPIO_PJ0 ,/* pin 72 */ +GPIO_PJ1 , +GPIO_PJ2 , +GPIO_PJ3 , +GPIO_PJ4 , +GPIO_PJ5 , +GPIO_PJ6 , +GPIO_PJ7 , +GPIO_PK0 ,/* pin 80 */ +GPIO_PK1 , +GPIO_PK2 , +GPIO_PK3 , +GPIO_PK4 , +GPIO_PK5 , +GPIO_PK6 , +GPIO_PK7 , +GPIO_PL0 ,/* pin 88 */ +GPIO_PL1 , +GPIO_PL2 , +GPIO_PL3 , +GPIO_PL4 , +GPIO_PL5 , +GPIO_PL6 , +GPIO_PL7 , +GPIO_PM0 ,/* pin 96 */ +GPIO_PM1 , +GPIO_PM2 , +GPIO_PM3 , +GPIO_PM4 , +GPIO_PM5 , +GPIO_PM6 , +GPIO_PM7 , +GPIO_PN0 ,/* pin 104 */ +GPIO_PN1 , +GPIO_PN2 , +GPIO_PN3 , +GPIO_PN4 , +GPIO_PN5 , +GPIO_PN6 , +GPIO_PN7 , +GPIO_PO0 ,/* pin 112 */ +GPIO_PO1 , +GPIO_PO2 , +GPIO_PO3 , +GPIO_PO4 , +GPIO_PO5 , +GPIO_PO6 , +GPIO_PO7 , +GPIO_PP0 ,/* pin 120 */ +GPIO_PP1 , +GPIO_PP2 , +GPIO_PP3 , +GPIO_PP4 , +GPIO_PP5 , +GPIO_PP6 , +GPIO_PP7 , +GPIO_PQ0 ,/* pin 128 */ +GPIO_PQ1 , +GPIO_PQ2 , +GPIO_PQ3 , +GPIO_PQ4 , +GPIO_PQ5 , +GPIO_PQ6 , +GPIO_PQ7 , +GPIO_PR0 ,/* pin 136 */ +GPIO_PR1 , +GPIO_PR2 , +GPIO_PR3 , +GPIO_PR4 , +GPIO_PR5 , +GPIO_PR6 , +GPIO_PR7 , +GPIO_PS0 ,/* pin 144 */ +GPIO_PS1 , +GPIO_PS2 , +GPIO_PS3 , +GPIO_PS4 , +GPIO_PS5 , +GPIO_PS6 , +GPIO_PS7 , +GPIO_PT0 ,/* pin 152 */ +GPIO_PT1 , +GPIO_PT2 , +GPIO_PT3 , +GPIO_PT4 , +GPIO_PT5 , +GPIO_PT6 , +GPIO_PT7 , +GPIO_PU0 ,/* pin 160 */ +GPIO_PU1 , +GPIO_PU2 , +GPIO_PU3 , +GPIO_PU4 , +GPIO_PU5 , +GPIO_PU6 , +GPIO_PU7 , +GPIO_PV0 ,/* pin 168 */ +GPIO_PV1 , +GPIO_PV2 , +GPIO_PV3 , +GPIO_PV4 , +GPIO_PV5 , +GPIO_PV6 , +GPIO_PV7 , +GPIO_PW0 ,/* pin 176 */ +GPIO_PW1 , +GPIO_PW2 , +GPIO_PW3 , +GPIO_PW4 , +GPIO_PW5 , +GPIO_PW6 , +GPIO_PW7 , +GPIO_PX0 ,/* pin 184 */ +GPIO_PX1 , +GPIO_PX2 , +GPIO_PX3 , +GPIO_PX4 , +GPIO_PX5 , +GPIO_PX6 , +GPIO_PX7 , +GPIO_PY0 ,/* pin 192 */ +GPIO_PY1 , +GPIO_PY2 , +GPIO_PY3 , +GPIO_PY4 , +GPIO_PY5 , +GPIO_PY6 , +GPIO_PY7 , +GPIO_PZ0 ,/* pin 200 */ +GPIO_PZ1 , +GPIO_PZ2 , +GPIO_PZ3 , +GPIO_PZ4 , +GPIO_PZ5 , +GPIO_PZ6 , +GPIO_PZ7 , +GPIO_PAA0 ,/* pin 208 */ +GPIO_PAA1 , +GPIO_PAA2 , +GPIO_PAA3 , +GPIO_PAA4 , +GPIO_PAA5 , +GPIO_PAA6 , +GPIO_PAA7 , +GPIO_PBB0 ,/* pin 216 */ +GPIO_PBB1 , +GPIO_PBB2 , +GPIO_PBB3 , +GPIO_PBB4 , +GPIO_PBB5 , +GPIO_PBB6 , +GPIO_PBB7 ,/* pin 223 */ +};/* -* GPIO_PI3 = Port I = 8, bit = 3. -* Seaboard: used for UART/SPI selection -* Harmony: not used +* Tegra2-specific GPIO API */ -#define GPIO_PI3 ((8 << 3) | 3) + +int gpio_direction_input (int gp); +int gpio_direction_output (int gp,int value); +int gpio_get_value (int gp); +void gpio_set_value (int gp,int value);#endif /* TEGRA2_GPIO_H_ */
drivers/gpio/Makefile +1 -0
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o COBJS-$(CONFIG_PCA953X) += pca953x.o COBJS-$(CONFIG_S5P) += s5p_gpio.o +COBJS-$(CONFIG_TEGRA2_GPIO) += tegra2_gpio.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c)
drivers/gpio/tegra2_gpio.c new file +299 -0
299 lines not on this page · raw message
Signature · 1 line
1.7.5
PATCH v2 1/2 GPIO: Tegra2: add GPIO driver for Tegra2
drivers/gpio/tegra2_gpio.c line 287
Quoted 2 lines · On Monday, May 02, 2011 18:45:47 Tom Warren wrote:
drivers/gpio/tegra2_gpio.c new file +2
-0+U_BOOT_CMD( + gpio, 5, 1, do_gpio,
looks to me like you're duplicating a lot of code that already exists in common/cmd_gpio.c
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110502/8932faa2/attachment.pgp
PATCH v2 1/2 GPIO: Tegra2: add GPIO driver for Tegra2
Mike,
Quoted 8 lines · Mike Frysinger
Quoted 2 lines · On Monday, May 02, 2011 18:45:47 Tom Warren wrote:
+U_BOOT_CMD(
+ ? ? gpio, ? 5, ? ? ?1, ? ? ?do_gpio,looks to me like you're duplicating a lot of code that already exists in
common/cmd_gpio.c
-mike
Possible - this was ported from another GPIO driver back in v2009.11 days. I'll take a look at cmd_gpio.c.
Thanks,
Tom
PATCH v2 2/2 arm: Tegra2: GPIO: enable GPIO for Tegra2 boards
In reply to Tom Warren---
Changes in V2:
- enable GPIO for all boards (tegra2-common.h)
include/configs/tegra2-common.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/tegra2-common.h +2 -0
@@ -160,4 +160,6 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) +#define CONFIG_TEGRA2_GPIO +#define CONFIG_CMD_TEGRA2_GPIO_INFO #endif /* __TEGRA2_COMMON_H */
Signature · 1 line
1.7.5