Skip to contentSkip to conversation

ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active

PATCH In review Jarkko Nikula 4 participants 6 messages Jun 10, 2011 – Sep 23, 2011

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active

Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37.

CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream.

This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON().

Fix this by not changing any configuration in omap_mcbsp_dai_set_dai_sysclk if the McBSP is already active. This test should have been here just from the beginning anyway.

---
v2:
- Returns -EBUSY from omap_mcbsp_dai_set_dai_sysclk if the input clock rate doesn't match with another stream's configuration and 0 otherwise.

For 2.6.37 and onward.

This issue is valid to those machine drivers that use the McBSP as a DAI link master and are configuring the CLKS source (like sound/soc/omap/omap3pandora.c in mainline).

---
 sound/soc/omap/omap-mcbsp.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
sound/soc/omap/omap-mcbsp.c +6 -0
index 07b7723..4b82290 100644
@@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int err = 0;
 
+	if (mcbsp_data->active)
+		if (freq == mcbsp_data->in_freq)
+			return 0;
+		else
+			return -EBUSY;
+
 	/* The McBSP signal muxing functions are only available on McBSP1 */
 	if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
 	    clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
Signature · 1 line
1.7.4.4
#3 lore raw
In reply to Jarkko Nikula

Hi Mark, Liam,

Could you pick this patch?
For some reason it was missed, it is not present in upstream.

Thank you,
Péter

Quoted 50 lines · On Friday 10 June 2011 15:17:25 Jarkko Nikula wrote:

Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37.

CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream.

This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON().

Fix this by not changing any configuration in omap_mcbsp_dai_set_dai_sysclk if the McBSP is already active. This test should have been here just from the beginning anyway.

---
v2:
- Returns -EBUSY from omap_mcbsp_dai_set_dai_sysclk if the input clock rate doesn't match with another stream's configuration and 0 otherwise.

For 2.6.37 and onward.

This issue is valid to those machine drivers that use the McBSP as a DAI link master and are configuring the CLKS source (like sound/soc/omap/omap3pandora.c in mainline).

---
 sound/soc/omap/omap-mcbsp.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
sound/soc/omap/omap-mcbsp.c +6 -0
index 07b7723..4b82290 100644
@@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct
 snd_soc_dai *cpu_dai, struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int err = 0;
 
+	if (mcbsp_data->active)
+		if (freq == mcbsp_data->in_freq)
+			return 0;
+		else
+			return -EBUSY;
+
 	/* The McBSP signal muxing functions are only available on McBSP1 */
 	if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
 	    clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
#4 lore raw
Quoted 4 lines · Péter Ujfalusi

Hi Mark, Liam,

Could you pick this patch?
For some reason it was missed, it is not present in upstream.

...

Quoted 1 line
Quoted 1 line

Thanks Peter, that's true. I also have forgotten this one. I'll resend this with my current address. IRCC this was acked by you Peter so I can add it?

Signature · 1 line
Jarkko
#5 lore raw
Quoted 3 lines · On Friday 23 September 2011 10:58:50 Jarkko Nikula wrote:

Thanks Peter, that's true. I also have forgotten this one. I'll resend this with my current address. IRCC this was acked by you Peter so I can add it?

Yes, please add my ack.

--
Péter