ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active
PATCH v2 1/1 ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active
Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37.
CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream.
This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON().
Fix this by not changing any configuration in omap_mcbsp_dai_set_dai_sysclk if the McBSP is already active. This test should have been here just from the beginning anyway.
---
v2:
- Returns -EBUSY from omap_mcbsp_dai_set_dai_sysclk if the input clock rate doesn't match with another stream's configuration and 0 otherwise.
For 2.6.37 and onward.
This issue is valid to those machine drivers that use the McBSP as a DAI link master and are configuring the CLKS source (like sound/soc/omap/omap3pandora.c in mainline).
--- sound/soc/omap/omap-mcbsp.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
sound/soc/omap/omap-mcbsp.c +6 -0
@@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;int err =0 ; +if (mcbsp_data->active) +if (freq == mcbsp_data->in_freq) +return 0 ; +else +return -EBUSY ; +/* The McBSP signal muxing functions are only available on McBSP1 */ if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR || clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
Signature · 1 line
1.7.4.4
Quoted 3 lines · Jarkko Nikula
Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37.
_______________________________________________
stable mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/stable
Quoted 3 lines
Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37.
Hi Mark, Liam,
Could you pick this patch?
For some reason it was missed, it is not present in upstream.
Thank you,
Péter
Quoted 50 lines · On Friday 10 June 2011 15:17:25 Jarkko Nikula wrote:
Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37.
CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream.
This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does
BUG_ON().Fix this by not changing any configuration in
omap_mcbsp_dai_set_dai_sysclkif the McBSP is already active. This test should have been here just from the beginning anyway.Signed-off-by Jarkko Nikula <[email protected]>---
v2:
- Returns-EBUSYfromomap_mcbsp_dai_set_dai_sysclkif the input clock rate doesn't match with another stream's configuration and 0 otherwise.For 2.6.37 and onward.
This issue is valid to those machine drivers that use the McBSP as a DAI link master and are configuring the CLKS source (like
sound/soc/omap/omap3pandora.cin mainline).--- sound/soc/omap/omap-mcbsp.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)sound/soc/omap/omap-mcbsp.c +6
-0@@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;int err =0 ; +if (mcbsp_data->active) +if (freq == mcbsp_data->in_freq) +return 0 ; +else +return -EBUSY ; +/* The McBSP signal muxing functions are only available on McBSP1 */ if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR || clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
Quoted 4 lines · Péter Ujfalusi
Hi Mark, Liam,
Could you pick this patch?
For some reason it was missed, it is not present in upstream.
...
Quoted 1 line
Quoted 1 line
Signed-off-by Jarkko Nikula<[email protected]>
Thanks Peter, that's true. I also have forgotten this one. I'll resend this with my current address. IRCC this was acked by you Peter so I can add it?
Signature · 1 line
Jarkko
Quoted 3 lines · On Friday 23 September 2011 10:58:50 Jarkko Nikula wrote:
Thanks Peter, that's true. I also have forgotten this one. I'll resend this with my current address. IRCC this was acked by you Peter so I can add it?
Yes, please add my ack.
--
Péter