Skip to contentSkip to conversation

OMAP3: Overo: Update GPMC timing for ethernet chip.

PATCH Superseded Philip Balister 4 participants 7 messages Sep 8, 2011 – Sep 13, 2011 Arm (32-bit)

lore
Share & tools
lore

Philip Balister

author
#0 lore raw

PATCH v2 1/1 OMAP3: Overo: Update GPMC timing for ethernet chip.

The existing timing does not quite meet the minimum requirements in the LAN9221 datasheet. The timing in this patch solves problems noticed on some parts. The patch also combines the CS configuration for the overo and igep0020 boards per request.

Signed-off-by Philip Balister <[email protected]>

---
Changes for v2: Added igep0020 board per Enric Balletb? i Serra. Compile tested only.

 arch/arm/include/asm/arch-omap3/omap_gpmc.h |    9 +++++++++
 board/isee/igep0020/igep0020.c              |    1 +
 board/isee/igep0020/igep0020.h              |    9 ---------
 board/overo/overo.c                         |    1 +
 board/overo/overo.h                         |    9 ---------
 5 files changed, 11 insertions(+), 18 deletions(-)
arch/arm/include/asm/arch-omap3/omap_gpmc.h +9 -0
index bd22bce..800e4ee 100644
@@ -80,4 +80,13 @@
 }
 #endif
 
+/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1    0x00001000
+#define NET_LAN9221_GPMC_CONFIG2    0x00060700
+#define NET_LAN9221_GPMC_CONFIG3    0x00020201
+#define NET_LAN9221_GPMC_CONFIG4    0x06000700
+#define NET_LAN9221_GPMC_CONFIG5    0x0006090A
+#define NET_LAN9221_GPMC_CONFIG6    0x87030000
+#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
+
 #endif /* __ASM_ARCH_OMAP_GPMC_H */
board/isee/igep0020/igep0020.c +1 -0
index 36cc924..a5210c9 100644
@@ -29,6 +29,7 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/omap_gpmc.h>
 #include <asm/mach-types.h>
 #include "igep0020.h"
board/isee/igep0020/igep0020.h +0 -9
index c08d758..3d6e15f 100644
@@ -29,15 +29,6 @@ const omap3_sysinfo sysinfo = {
 	"ONENAND",
 };
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1    0x00001000
-#define NET_LAN9221_GPMC_CONFIG2    0x00080701
-#define NET_LAN9221_GPMC_CONFIG3    0x00020201
-#define NET_LAN9221_GPMC_CONFIG4    0x08030703
-#define NET_LAN9221_GPMC_CONFIG5    0x00060908
-#define NET_LAN9221_GPMC_CONFIG6    0x87030000
-#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
-
 static void setup_net_chip(void);
 
 /*
board/overo/overo.c +1 -0
index 4eafdb1..bcd7d62 100644
@@ -37,6 +37,7 @@
 #include <asm/arch/mem.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/omap_gpmc.h>
 #include <asm/mach-types.h>
 #include "overo.h"
board/overo/overo.h +0 -9
index 68e1243..57f2457 100644
@@ -33,15 +33,6 @@ const omap3_sysinfo sysinfo = {
 #endif
 };
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1    0x00001000
-#define NET_LAN9221_GPMC_CONFIG2    0x00080701
-#define NET_LAN9221_GPMC_CONFIG3    0x00020201
-#define NET_LAN9221_GPMC_CONFIG4    0x08030703
-#define NET_LAN9221_GPMC_CONFIG5    0x00060908
-#define NET_LAN9221_GPMC_CONFIG6    0x87030000
-#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
-
 /*
  * IEN  - Input Enable
  * IDIS - Input Disable
Signature · 1 line
1.7.4.4
#1 lore raw

PATCH v2 1/1 OMAP3: Overo: Update GPMC timing for ethernet chip.

2011/9/9 Philip Balister <[email protected]>:

Quoted 96 lines

The existing timing does not quite meet the minimum requirements in the LAN9221 datasheet. The timing in this patch solves problems noticed on some parts. The patch also combines the CS configuration for the overo and igep0020 boards per request.

Signed-off-by Philip Balister <[email protected]>

---
Changes for v2: Added igep0020 board per Enric Balletb? i Serra. Compile tested only.

?arch/arm/include/asm/arch-omap3/omap_gpmc.h | ? ?9 +++++++++
?board/isee/igep0020/igep0020.c ? ? ? ? ? ? ?| ? ?1 +
?board/isee/igep0020/igep0020.h ? ? ? ? ? ? ?| ? ?9 ---------
?board/overo/overo.c ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
?board/overo/overo.h ? ? ? ? ? ? ? ? ? ? ? ? | ? ?9 ---------

?5 files changed, 11 insertions(+), 18 deletions(-)

arch/arm/include/asm/arch-omap3/omap_gpmc.h +0 -0
index bd22bce..800e4ee 100644
@@ -80,4 +80,13 @@
 ?}

?#endif

arch/arm/include/asm/arch-omap3/omap_gpmc.h +9 -0
+/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000
+#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00060700
+#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201
+#define NET_LAN9221_GPMC_CONFIG4 ? ?0x06000700
+#define NET_LAN9221_GPMC_CONFIG5 ? ?0x0006090A
+#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000
+#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c
+

?#endif /* __ASM_ARCH_OMAP_GPMC_H */

board/isee/igep0020/igep0020.c +0 -0
index 36cc924..a5210c9 100644
@@ -29,6 +29,7 @@

?#include <asm/arch/mmc_host_def.h>
?#include <asm/arch/mux.h>
?#include <asm/arch/sys_proto.h>
+#include <asm/arch/omap_gpmc.h>
?#include <asm/mach-types.h>
?#include "igep0020.h"

board/isee/igep0020/igep0020.h +0 -9
index c08d758..3d6e15f 100644
@@ -29,15 +29,6 @@ const omap3_sysinfo sysinfo = {
 ? ? ? ?"ONENAND",
 ?};
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00080701
-#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 ? ?0x08030703
-#define NET_LAN9221_GPMC_CONFIG5 ? ?0x00060908
-#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000
-#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c
-
 ?static void setup_net_chip(void);

?/*

board/overo/overo.c +0 -0
index 4eafdb1..bcd7d62 100644
@@ -37,6 +37,7 @@

?#include <asm/arch/mem.h>
?#include <asm/arch/sys_proto.h>
?#include <asm/arch/gpio.h>
+#include <asm/arch/omap_gpmc.h>
?#include <asm/mach-types.h>
?#include "overo.h"

board/overo/overo.h +0 -0
index 68e1243..57f2457 100644
@@ -33,15 +33,6 @@ const omap3_sysinfo sysinfo = {

?#endif
?};

board/overo/overo.h +0 -9
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00080701
-#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 ? ?0x08030703
-#define NET_LAN9221_GPMC_CONFIG5 ? ?0x00060908
-#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000
-#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c
-
Quoted 7 lines

?/*
?* IEN ?- Input Enable
?* IDIS - Input Disable
--
1.7.4.4

Tested on igep0020 machine (aka IGEP v2). Thanks Philip

Acked-by Enric Balletbo i Serra <[email protected]>
Tested-by Enric Balletbo i Serra <[email protected]>
author
#2 lore raw

PATCH v2 1/1 OMAP3: Overo: Update GPMC timing for ethernet chip.

I see I should have copied a maintainer on this patch. Which tree will this sort of path go upstream via? It seems like my choices are ARM of OMAP3.

I've got a number of other patches that should go upstream that are Overo centric. In general, what route should they take upstream?

Philip

Quoted 113 lines · Enric Balletb? i Serra

2011/9/9 Philip Balister<[email protected]>:

Quoted 100 lines

The existing timing does not quite meet the minimum requirements in the LAN9221 datasheet. The timing in this patch solves problems noticed on some parts. The patch also combines the CS configuration for the overo and igep0020 boards per request.

Signed-off-by Philip Balister<[email protected]>

---
Changes for v2: Added igep0020 board per Enric Balletb? i Serra. Compile tested only.

  arch/arm/include/asm/arch-omap3/omap_gpmc.h |    9 +++++++++
  board/isee/igep0020/igep0020.c              |    1 +
  board/isee/igep0020/igep0020.h              |    9 ---------
  board/overo/overo.c                         |    1 +
  board/overo/overo.h                         |    9 ---------
  5 files changed, 11 insertions(+), 18 deletions(-)
arch/arm/include/asm/arch-omap3/omap_gpmc.h +9 -0
index bd22bce..800e4ee 100644
@@ -80,4 +80,13 @@
  }
  #endif
 
+/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1    0x00001000
+#define NET_LAN9221_GPMC_CONFIG2    0x00060700
+#define NET_LAN9221_GPMC_CONFIG3    0x00020201
+#define NET_LAN9221_GPMC_CONFIG4    0x06000700
+#define NET_LAN9221_GPMC_CONFIG5    0x0006090A
+#define NET_LAN9221_GPMC_CONFIG6    0x87030000
+#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
+
  #endif /* __ASM_ARCH_OMAP_GPMC_H */
board/isee/igep0020/igep0020.c +1 -0
index 36cc924..a5210c9 100644
@@ -29,6 +29,7 @@
  #include<asm/arch/mmc_host_def.h>
  #include<asm/arch/mux.h>
  #include<asm/arch/sys_proto.h>
+#include<asm/arch/omap_gpmc.h>
  #include<asm/mach-types.h>
  #include "igep0020.h"
board/isee/igep0020/igep0020.h +0 -9
index c08d758..3d6e15f 100644
@@ -29,15 +29,6 @@ const omap3_sysinfo sysinfo = {
        "ONENAND",
  };
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1    0x00001000
-#define NET_LAN9221_GPMC_CONFIG2    0x00080701
-#define NET_LAN9221_GPMC_CONFIG3    0x00020201
-#define NET_LAN9221_GPMC_CONFIG4    0x08030703
-#define NET_LAN9221_GPMC_CONFIG5    0x00060908
-#define NET_LAN9221_GPMC_CONFIG6    0x87030000
-#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
-
  static void setup_net_chip(void);
 
  /*
board/overo/overo.c +1 -0
index 4eafdb1..bcd7d62 100644
@@ -37,6 +37,7 @@
  #include<asm/arch/mem.h>
  #include<asm/arch/sys_proto.h>
  #include<asm/arch/gpio.h>
+#include<asm/arch/omap_gpmc.h>
  #include<asm/mach-types.h>
  #include "overo.h"
board/overo/overo.h +0 -10
index 68e1243..57f2457 100644
@@ -33,15 +33,6 @@ const omap3_sysinfo sysinfo = {
  #endif
  };
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1    0x00001000
-#define NET_LAN9221_GPMC_CONFIG2    0x00080701
-#define NET_LAN9221_GPMC_CONFIG3    0x00020201
-#define NET_LAN9221_GPMC_CONFIG4    0x08030703
-#define NET_LAN9221_GPMC_CONFIG5    0x00060908
-#define NET_LAN9221_GPMC_CONFIG6    0x87030000
-#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
-
  /*
  * IEN  - Input Enable
  * IDIS - Input Disable
--
Quoted 3 lines

1.7.4.4

Tested on igep0020 machine (aka IGEP v2). Thanks Philip

Acked-by Enric Balletbo i Serra<[email protected]>
Tested-by Enric Balletbo i Serra<[email protected]>

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

author
#3 lore raw

PATCH v2 1/1 OMAP3: Overo: Update GPMC timing for ethernet chip.

Quoted 6 lines · Philip Balister

I see I should have copied a maintainer on this patch. Which tree will this sort of path go upstream via? It seems like my choices are ARM of OMAP3.

I've got a number of other patches that should go upstream that are Overo centric. In general, what route should they take upstream?

Ping? Any tips for getting patched committed would be helpful, I'm sure I'm doing something wrong.

Philip

Quoted 122 lines

Philip

Quoted 107 lines · Enric Balletb? i Serra

2011/9/9 Philip Balister<[email protected]>:

Quoted 100 lines

The existing timing does not quite meet the minimum requirements in the LAN9221 datasheet. The timing in this patch solves problems noticed on some parts. The patch also combines the CS configuration for the overo and igep0020 boards per request.

Signed-off-by Philip Balister<[email protected]>

---
Changes for v2: Added igep0020 board per Enric Balletb? i Serra. Compile tested only.

   arch/arm/include/asm/arch-omap3/omap_gpmc.h |    9 +++++++++
   board/isee/igep0020/igep0020.c              |    1 +
   board/isee/igep0020/igep0020.h              |    9 ---------
   board/overo/overo.c                         |    1 +
   board/overo/overo.h                         |    9 ---------
   5 files changed, 11 insertions(+), 18 deletions(-)
arch/arm/include/asm/arch-omap3/omap_gpmc.h +9 -0
index bd22bce..800e4ee 100644
@@ -80,4 +80,13 @@
   }
   #endif
 
+/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1    0x00001000
+#define NET_LAN9221_GPMC_CONFIG2    0x00060700
+#define NET_LAN9221_GPMC_CONFIG3    0x00020201
+#define NET_LAN9221_GPMC_CONFIG4    0x06000700
+#define NET_LAN9221_GPMC_CONFIG5    0x0006090A
+#define NET_LAN9221_GPMC_CONFIG6    0x87030000
+#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
+
   #endif /* __ASM_ARCH_OMAP_GPMC_H */
board/isee/igep0020/igep0020.c +1 -0
index 36cc924..a5210c9 100644
@@ -29,6 +29,7 @@
   #include<asm/arch/mmc_host_def.h>
   #include<asm/arch/mux.h>
   #include<asm/arch/sys_proto.h>
+#include<asm/arch/omap_gpmc.h>
   #include<asm/mach-types.h>
   #include "igep0020.h"
board/isee/igep0020/igep0020.h +0 -9
index c08d758..3d6e15f 100644
@@ -29,15 +29,6 @@ const omap3_sysinfo sysinfo = {
         "ONENAND",
   };
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1    0x00001000
-#define NET_LAN9221_GPMC_CONFIG2    0x00080701
-#define NET_LAN9221_GPMC_CONFIG3    0x00020201
-#define NET_LAN9221_GPMC_CONFIG4    0x08030703
-#define NET_LAN9221_GPMC_CONFIG5    0x00060908
-#define NET_LAN9221_GPMC_CONFIG6    0x87030000
-#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
-
   static void setup_net_chip(void);
 
   /*
board/overo/overo.c +1 -0
index 4eafdb1..bcd7d62 100644
@@ -37,6 +37,7 @@
   #include<asm/arch/mem.h>
   #include<asm/arch/sys_proto.h>
   #include<asm/arch/gpio.h>
+#include<asm/arch/omap_gpmc.h>
   #include<asm/mach-types.h>
   #include "overo.h"
board/overo/overo.h +0 -10
index 68e1243..57f2457 100644
@@ -33,15 +33,6 @@ const omap3_sysinfo sysinfo = {
   #endif
   };
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1    0x00001000
-#define NET_LAN9221_GPMC_CONFIG2    0x00080701
-#define NET_LAN9221_GPMC_CONFIG3    0x00020201
-#define NET_LAN9221_GPMC_CONFIG4    0x08030703
-#define NET_LAN9221_GPMC_CONFIG5    0x00060908
-#define NET_LAN9221_GPMC_CONFIG6    0x87030000
-#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
-
   /*
   * IEN  - Input Enable
   * IDIS - Input Disable
--
Quoted 3 lines

1.7.4.4

Tested on igep0020 machine (aka IGEP v2). Thanks Philip

Quoted 6 lines
Acked-by Enric Balletbo i Serra<[email protected]>
Tested-by Enric Balletbo i Serra<[email protected]>

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#4 lore raw

PATCH v2 1/1 OMAP3: Overo: Update GPMC timing for ethernet chip.

Quoted 10 lines · Philip Balister
Quoted 6 lines · Philip Balister

I see I should have copied a maintainer on this patch. Which tree will this sort of path go upstream via? It seems like my choices are ARM of OMAP3.

I've got a number of other patches that should go upstream that are Overo centric. In general, what route should they take upstream?

Ping? Any tips for getting patched committed would be helpful, I'm sure I'm doing something wrong.

Sandeep, is this a patch you can pull into either u-boot-ti/master or u-boot-ti/next? I believe it is just a bug fix and might be suitable to pull into the existing -rcX.

Quoted 131 lines

Philip

Quoted 118 lines

Philip

Quoted 107 lines · Enric Balletb? i Serra

2011/9/9 Philip Balister<[email protected]>:

Quoted 96 lines

The existing timing does not quite meet the minimum requirements in the LAN9221 datasheet. The timing in this patch solves problems noticed on some parts. The patch also combines the CS configuration for the overo and igep0020 boards per request.

Signed-off-by Philip Balister<[email protected]>

---
Changes for v2: Added igep0020 board per Enric Balletb? i Serra. Compile tested only.

? ?arch/arm/include/asm/arch-omap3/omap_gpmc.h | ? ?9 +++++++++
? ?board/isee/igep0020/igep0020.c ? ? ? ? ? ? ?| ? ?1 +
? ?board/isee/igep0020/igep0020.h ? ? ? ? ? ? ?| ? ?9 ---------
? ?board/overo/overo.c ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
? ?board/overo/overo.h ? ? ? ? ? ? ? ? ? ? ? ? | ? ?9 ---------

? ?5 files changed, 11 insertions(+), 18 deletions(-)

arch/arm/include/asm/arch-omap3/omap_gpmc.h +0 -0
index bd22bce..800e4ee 100644
@@ -80,4 +80,13 @@
 ? ?}

? ?#endif

arch/arm/include/asm/arch-omap3/omap_gpmc.h +9 -0
+/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000
+#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00060700
+#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201
+#define NET_LAN9221_GPMC_CONFIG4 ? ?0x06000700
+#define NET_LAN9221_GPMC_CONFIG5 ? ?0x0006090A
+#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000
+#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c
+

? ?#endif /* __ASM_ARCH_OMAP_GPMC_H */

board/isee/igep0020/igep0020.c +0 -0
index 36cc924..a5210c9 100644
@@ -29,6 +29,7 @@

? ?#include<asm/arch/mmc_host_def.h>
? ?#include<asm/arch/mux.h>
? ?#include<asm/arch/sys_proto.h>
+#include<asm/arch/omap_gpmc.h>
? ?#include<asm/mach-types.h>
? ?#include "igep0020.h"

board/isee/igep0020/igep0020.h +0 -9
index c08d758..3d6e15f 100644
@@ -29,15 +29,6 @@ const omap3_sysinfo sysinfo = {
 ? ? ? ? ?"ONENAND",
 ? ?};
 
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00080701
-#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 ? ?0x08030703
-#define NET_LAN9221_GPMC_CONFIG5 ? ?0x00060908
-#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000
-#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c
-
 ? ?static void setup_net_chip(void);

? ?/*

board/overo/overo.c +0 -0
index 4eafdb1..bcd7d62 100644
@@ -37,6 +37,7 @@

? ?#include<asm/arch/mem.h>
? ?#include<asm/arch/sys_proto.h>
? ?#include<asm/arch/gpio.h>
+#include<asm/arch/omap_gpmc.h>
? ?#include<asm/mach-types.h>
? ?#include "overo.h"

board/overo/overo.h +0 -0
index 68e1243..57f2457 100644
@@ -33,15 +33,6 @@ const omap3_sysinfo sysinfo = {

? ?#endif
? ?};

board/overo/overo.h +0 -9
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00080701
-#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 ? ?0x08030703
-#define NET_LAN9221_GPMC_CONFIG5 ? ?0x00060908
-#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000
-#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c
-
Quoted 7 lines

? ?/*
? ?* IEN ?- Input Enable
? ?* IDIS - Input Disable
--
1.7.4.4

Tested on igep0020 machine (aka IGEP v2). Thanks Philip

Quoted 6 lines
Acked-by Enric Balletbo i Serra<[email protected]>
Tested-by Enric Balletbo i Serra<[email protected]>

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Quoted 4 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#5 lore raw

PATCH v2 1/1 OMAP3: Overo: Update GPMC timing for ethernet chip.

Quoted 13 lines
Quoted 8 lines · Philip Balister
Quoted 6 lines · Philip Balister

I see I should have copied a maintainer on this patch. Which tree will this sort of path go upstream via? It seems like my choices are ARM of OMAP3.

I've got a number of other patches that should go upstream that are Overo centric. In general, what route should they take upstream?

Quoted 7 lines
Quoted 2 lines

Ping? Any tips for getting patched committed would be helpful, I'm sure I'm doing something wrong.

Sandeep, is this a patch you can pull into either u-boot-ti/master or u-boot-ti/next? I believe it is just a bug fix and might be suitable to pull into the existing -rcX.

u-boot-ti/next

#6 lore raw

PATCH v2 1/1 OMAP3: Overo: Update GPMC timing for ethernet chip.

In reply to Philip Balister
Quoted 8 lines · Philip Balister
Quoted 6 lines

I see I should have copied a maintainer on this patch. Which tree will this sort of path go upstream via? It seems like my choices are ARM of OMAP3.

I've got a number of other patches that should go upstream that are Overo centric. In general, what route should they take upstream?

You can send them as soon as you are ready.

Quoted 3 lines

Ping? Any tips for getting patched committed would be helpful, I'm sure I'm doing something wrong.

I'll apply it to u-boot-ti/next

I'll setup a next branch soon.

--Sandeep