ntpclient compile fail
Hello:
I'm adding ntpclient into my distro.
but build fail, reason is the CFLAGS/LDFLAGS in it's Makefile didn't take effect.
What can I do?
the original makefile is:
CFLAGS += -fno-strict-aliasing
CFLAGS += -std=c89
CFLAGS += -W -Wall
CFLAGS += -O2
CFLAGS += -DENABLE_DEBUG
CFLAGS += -DENABLE_REPLAY
LDFLAGS += -lrt
all: ntpclient
test: ntpclient
./ntpclient -d -r <test.dat
ntpclient: ntpclient.o phaselock.o
ntpclient.o phaselock.o: ntpclient.h
adjtimex: adjtimex.o
clean:
rm -f ntpclient adjtimex *.o
Signature · 3 lines
Yi Qingliang [email protected] http://niqingliang2003.wordpress.com
I have added "override" in the head of every CFLAGS/LDFLAGS line, but error still there.
the link order is a common problem.
-Wl,-lrt ntpclient.o phaselock.o -o ntpclient
should be
ntpclient.o phaselock.o -Wl,-lrt ntpclient
Does poky have some option or some solution for that? (I build it success on host.)
Quoted 42 lines · Ni Qingliang
Hello:
I'm adding ntpclient into my distro.but build fail, reason is the CFLAGS/LDFLAGS in it's
Makefiledidn't take effect.What can I do?
the original makefile is:
CFLAGS += -fno-strict-aliasing
CFLAGS += -std=c89
CFLAGS += -W -Wall
CFLAGS += -O2
CFLAGS += -DENABLE_DEBUG
CFLAGS += -DENABLE_REPLAYLDFLAGS += -lrt
all: ntpclient
test: ntpclient
./ntpclient -d -r <test.datntpclient: ntpclient.o phaselock.o
ntpclient.o phaselock.o:
ntpclient.hadjtimex: adjtimex.o
clean:
rm -f ntpclient adjtimex *.o--
Yi Qingliang
[email protected]
http://niqingliang2003.wordpress.com_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 3 lines
Yi Qingliang [email protected] http://niqingliang2003.wordpress.com
Quoted 5 lines · Ni Qingliang
Hello:
I'm adding ntpclient into my distro.but build fail, reason is the CFLAGS/LDFLAGS in it's
Makefiledidn't take effect.
If the CFLAGS are not taking effect from the Makefile are you over ridding the value in the recipe? Can you point us at a copy of the recipe you are using?
-M
Thanks!
the attachement is the bb file and Makefile(modified),
after 'override' CFLAGS/LDFLAGS in Makefile, I have added override LDFLAGS += -Wl,--no-as-needed
in the Makefile to neutralize the '-Wl,--as-needed' in the original LDFLAGS.
and then the world clear.
Quoted 13 lines · On Tue, 2011-09-27 at 23:46 +0800, McClintock Matthew-B29882 wrote:
Quoted 5 lines · Ni Qingliang
Hello:
I'm adding ntpclient into my distro.but build fail, reason is the CFLAGS/LDFLAGS in it's
Makefiledidn't take effect.If the CFLAGS are not taking effect from the
Makefileare you over ridding the value in the recipe? Can you point us at a copy of the recipe you are using?-M
Signature · 3 lines
Yi Qingliang [email protected] http://niqingliang2003.wordpress.com
DESCRIPTION = "ntpclient"
SECTION = "iotproduct"
LICENSE = "Google"LIC_FILES_CHKSUM = "file://README;md5=098a6a289094e42f974b11e2151f5644" PR = "r0"
PV = "2010_365"
SRC_URI = "http://doolittle.icarus.com/ntpclient/ntpclient_${PV}.tar.gz \
file://Makefile"
S = "${WORKDIR}/${PN}-2010"
do_patch () {
cp -f ${WORKDIR}/Makefile ${S}/
}do_compile () {
oe_runmake
}
do_install () {
install -d ${D}/bin/
install -m 0755 ${S}/ntpclient ${D}/bin/
}# A long time ago, far, far away, under Solaris, you needed to
# CFLAGS += -xO2 -Xc
# LDLIBS += -lnsl -lsocket
# To cross-compile
# CC = arm-linux-gcc
# To check for lint
# CFLAGS += -Wpointer-arith -Wcast-align -Wcast-qual -Wshadow -Wundef \
# -Waggregate-return -Wnested-externs -Winline -Wwrite-strings -Wstrict-prototypes
# This is old-school networking code, making the traditional cast between
# struct sockaddr* and struct sockaddr_in*. Thus a modern gcc needs: override CFLAGS += -fno-strict-aliasing
override CFLAGS += -std=c89
override CFLAGS += -W -Wall
override CFLAGS += -O2
# CFLAGS += -DPRECISION_SIOCGSTAMP
override CFLAGS += -DENABLE_DEBUG
override CFLAGS += -DENABLE_REPLAY
# CFLAGS += -DUSE_OBSOLETE_GETTIMEOFDAY
override LDFLAGS += -Wl,--no-as-needed
override LDFLAGS += -Wl,-lrt
all: ntpclient
test: ntpclient
./ntpclient -d -r <test.dat
ntpclient: ntpclient.o phaselock.o
ntpclient.o phaselock.o: ntpclient.h
adjtimex: adjtimex.o
clean:
rm -f ntpclient adjtimex *.o
Quoted 1 line · Ni Qingliang
the attachement is the bb file and Makefile(modified),
It usually best to include these attachments inline when possible.
Quoted 6 lines
after 'override' CFLAGS/LDFLAGS in
Makefile, I have added override LDFLAGS += -Wl,--no-as-needed
in theMakefileto neutralize the '-Wl,--as-needed' in the original LDFLAGS.and then the world clear.
Are you editing the source files in this package or the recipe itself?
-M
1. sorry, I will.
2. Yes, I made a new Makefile (based on the original) as the patch of ntpclient (which will override the original Makefile).
Quoted 16 lines · On Wed, 2011-09-28 at 09:50 +0800, McClintock Matthew-B29882 wrote:
Quoted 1 line · Ni Qingliang
the attachement is the bb file and Makefile(modified),
It usually best to include these attachments inline when possible.
Quoted 6 lines
after 'override' CFLAGS/LDFLAGS in
Makefile, I have added override LDFLAGS += -Wl,--no-as-needed
in theMakefileto neutralize the '-Wl,--as-needed' in the original LDFLAGS.and then the world clear.
Are you editing the source files in this package or the recipe itself?
-M
Signature · 3 lines
Yi Qingliang [email protected] http://niqingliang2003.wordpress.com
Quoted 3 lines · Ni Qingliang
1. sorry, I will.
2. Yes, I made a newMakefile(based on the original) as the patch of ntpclient (which will override the originalMakefile).
There are lots of ways to do this and avoid making a patch. You can use EXTRA_OECONF, EXTRA_OEMAKE, EXTRA_CFLAGS, etc in the recipe itself to fix up the build process. You can even go and modify the variables in the do_configure, do_compile, etc build steps as well.
-M
thanks.
If we want to use the original Makefile, we must get rid of the "-e" and "-Wl,as-needed" in original arguments, for latter, we can add "-Wl,--no-as-needed", but what about the "-e"?
Quoted 12 lines · On Wed, 2011-09-28 at 10:12 +0800, McClintock Matthew-B29882 wrote:
Quoted 3 lines · Ni Qingliang
1. sorry, I will.
2. Yes, I made a newMakefile(based on the original) as the patch of ntpclient (which will override the originalMakefile).There are lots of ways to do this and avoid making a patch. You can use
EXTRA_OECONF,EXTRA_OEMAKE,EXTRA_CFLAGS, etc in the recipe itself to fix up the build process. You can even go and modify the variables in thedo_configure,do_compile, etc build steps as well.-M
Signature · 3 lines
Yi Qingliang [email protected] http://niqingliang2003.wordpress.com