Added ImageMagick 6.7.2-3
PATCH 1/1 Added ImageMagick 6.7.2-3
From: Gavin Swanson <[email protected]>
--- recipes/imagemagick/imagemagick_6.7.2-3.bb | 36 ++++++++++++++++++++++++++++ 1 files changed, 36 insertions(+), 0 deletions(-) create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bb
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +36 -0
@@ -0,0 +1,36 @@ +DESCRIPTION = "ImageMagick is an image convertion tools" +SECTION = "console/utils" +LICENSE = "GPL" +# FIXME: There is much more checked libraries. All should be added or explicitly disabled to get consistent results. +DEPENDS = "lcms bzip2 jpeg libpng librsvg tiff zlib" + +PR = "r1" + +SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \ +# file://PerlMagic_MakePatch;apply=yes \ + " + +IMVER = "6.7.2-3" + +S = "${WORKDIR}/ImageMagick-${IMVER}" + +inherit autotools binconfig pkgconfig + +EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp" + +FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \ + ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \ + ${libdir}/ImageMagick-${IMVER}/config/ \ + ${datadir}/ImageMagick-${IMVER}" + +FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a" + +FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*" + +BBCLASSEXTEND = "native" + +LEAD_SONAME = "libMagickCore.so.*" + + +SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea" +SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"
Signature · 1 line
1.7.1
Dear Gavin,
thank you for your patch.
Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:
Quoted 1 line
From: Gavin Swanson <[email protected]>
Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)
Change the commit summary to
imagemagick: Add version 6.7.2-3
and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.
You seem to have used an existing recipe as a template. Please note that too.
At last please add you Signed-off-by line.
Quoted 11 lines
--- recipes/imagemagick/imagemagick_6.7.2-3.bb | 36 ++++++++++++++++++++++++++++ 1 files changed, 36 insertions(+), 0 deletions(-) create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bbrecipes/imagemagick/imagemagick_6.7.2-3.bb new file +0
-0
recipes/imagemagick/imagemagick_6.7.2-3.bb line 3
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0@@ -0,0 +1,36 @@ +DESCRIPTION = "ImageMagick is an image convertion tools" +SECTION = "console/utils" +LICENSE = "GPL"
I updated those meta fields in the repository. Please update the above too.
recipes/imagemagick/imagemagick_6.7.2-3.bb line 7
Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4
-0+# FIXME: There is much more checked libraries. All should be added or explicitly disabled to get consistent results. +DEPENDS = "lcms bzip2 jpeg libpng librsvg tiff zlib" + +PR = "r1"
Please start with r0.
recipes/imagemagick/imagemagick_6.7.2-3.bb line 10
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ +SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \ +# file://PerlMagic_MakePatch;apply=yes \
Why is this patch not needed anymore? You can just delete the line then.
recipes/imagemagick/imagemagick_6.7.2-3.bb line 13
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ " + +IMVER = "6.7.2-3"
I think the old recipes strip the -3 to get the correct directory names. This way IMVER is equal to PN.
recipes/imagemagick/imagemagick_6.7.2-3.bb line 15
Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2
-0+ +S = "${WORKDIR}/ImageMagick-${IMVER}"
It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/ ImageMagick-6.4.4 temp
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/ ImageMagick-6.7.2-3 temp
recipes/imagemagick/imagemagick_6.7.2-3.bb line 24
Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9
-0+ +inherit autotools binconfig pkgconfig + +EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp" + +FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \ + ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \ + ${libdir}/ImageMagick-${IMVER}/config/ \ + ${datadir}/ImageMagick-${IMVER}"
Could you please look into the following warnings.
NOTE: package imagemagick-6.7.2-3-r1: task do_qa_staging: Succeeded
WARNING: the following files were installed but not shipped in any package:
WARNING: /usr/share/ImageMagick-6.7.2/francais.xml
WARNING: /usr/share/ImageMagick-6.7.2/locale.xml
WARNING: /usr/share/ImageMagick-6.7.2/english.xml
WARNING: /usr/share/ImageMagick-6.7.2/configure.xml
Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where IMVER should be used and where PV, which is 6.7.2-3.
recipes/imagemagick/imagemagick_6.7.2-3.bb line 36
Quoted 12 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +12
-0+ +FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a" + +FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*" + +BBCLASSEXTEND = "native" + +LEAD_SONAME = "libMagickCore.so.*" + + +SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea" +SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"
Thanks,
Paul
[1] http://www.openembedded.org/wiki/Commit_Policy
[2] http://www.openembedded.org/index.php?title=Styleguide
This is my first attempt at submitting a patch. Please bear with me. I read through the style guide and used the oe-stylize script on my changed version. I still have some questions.
Quoted 29 lines · Paul Menzel
Dear Gavin,
thank you for your patch.
Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:
Quoted 1 line
From: Gavin Swanson <[email protected]>
Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)
Change the commit summary to
imagemagick: Add version 6.7.2-3
and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.
You seem to have used an existing recipe as a template. Please note that too.
At last please add you Signed-off-by line.
Quoted 5 lines
---
recipes/imagemagick/imagemagick_6.7.2-3.bb | 36 ++++++++++++++++++++++++++++1 files changed, 36 insertions(+), 0 deletions(-)create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bb
Quoted 12 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 3
Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0@@ -0,0 +1,36 @@ +DESCRIPTION = "ImageMagick is an image convertion tools" +SECTION = "console/utils" +LICENSE = "GPL"I updated those meta fields in the repository. Please update the above too.
I'm using the gumstix repo, so I didn't have these changes, I looked them up though and have included them.
Quoted 7 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 7
Quoted 5 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4
-0+# FIXME: There is much more checked libraries. All should be added or explicitly disabled to get consistent results. +DEPENDS = "lcms bzip2 jpeg libpng librsvg tiff zlib" + +PR = "r1"Please start with
r0.
Done
Quoted 7 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 10
Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ +SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \ +# file://PerlMagic_MakePatch;apply=yes \Why is this patch not needed anymore? You can just delete the line then.
Not sure why it was needed in the first place, but it builds and runs fine without it.
Quoted 6 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 13
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ " + +IMVER = "6.7.2-3"I think the old recipes strip the
-3to get the correct directory names. This wayIMVERis equal toPN.
The build does not succeed without the -3 in it
Quoted 6 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 15
Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2
-0+ +S = "${WORKDIR}/ImageMagick-${IMVER}"It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.
This line has been removed with success
Quoted 18 lines
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/ ImageMagick-6.4.4 temp$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/ ImageMagick-6.7.2-3 temprecipes/imagemagick/imagemagick_6.7.2-3.bb line 24
Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9
-0+ +inherit autotools binconfig pkgconfig + +EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp" + +FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \ + ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \ + ${libdir}/ImageMagick-${IMVER}/config/ \ + ${datadir}/ImageMagick-${IMVER}"Could you please look into the following warnings.
Quoted 7 lines
NOTE: package imagemagick-6.7.2-3-r1: task
do_qa_staging: Succeeded
WARNING: the following files were installed but not shipped in any package:
WARNING:/usr/share/ImageMagick-6.7.2/francais.xml
WARNING:/usr/share/ImageMagick-6.7.2/locale.xml
WARNING:/usr/share/ImageMagick-6.7.2/english.xml
WARNING:/usr/share/ImageMagick-6.7.2/configure.xml
Not sure where those warnings show up for you, I don't get them during the build, is there some kind of extra warnings flag I should be using?
Quoted 4 lines
Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where
IMVERshould be used and wherePV, which is 6.7.2-3.
Not sure what you mean by this. As stated the build fails without the -3 on the IMVER
Quoted 28 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 36
Quoted 12 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +12
-0+ +FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a" + +FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*" + +BBCLASSEXTEND = "native" + +LEAD_SONAME = "libMagickCore.so.*" + + +SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea" +SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"Thanks,
Paul
[1] http://www.openembedded.org/wiki/Commit_Policy
[2] http://www.openembedded.org/index.php?title=Styleguide_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Am Freitag, den 07.10.2011, 09:38 -0700 schrieb Gavin Swanson:
Quoted 1 line
This is my first attempt at submitting a patch. Please bear with me.
I will. Thank you for following up on my review comments.
Quoted 42 lines
I read through the style guide and used the oe-stylize script on my changed version. I still have some questions.
Quoted 24 lines · Paul Menzel
Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:
Quoted 1 line
From: Gavin Swanson <[email protected]>
Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)
Change the commit summary to
imagemagick: Add version 6.7.2-3
and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.
You seem to have used an existing recipe as a template. Please note that too.
At last please add you Signed-off-by line.
Quoted 5 lines
--- recipes/imagemagick/imagemagick_6.7.2-3.bb | 36 ++++++++++++++++++++++++++++ 1 files changed, 36 insertions(+), 0 deletions(-) create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bbQuoted 12 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 3
Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0@@ -0,0 +1,36 @@ +DESCRIPTION = "ImageMagick is an image convertion tools" +SECTION = "console/utils" +LICENSE = "GPL"I updated those meta fields in the repository. Please update the above too.
Quoted 1 line
I'm using the gumstix repo,
Please include such information in your commit message.
Quoted 2 lines
so I didn't have these changes, I looked them up though and have included them.
Great. I am sorry for the hassle.
[…]
Quoted 10 lines
Quoted 6 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 10
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ +SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \ +# file://PerlMagic_MakePatch;apply=yes \Why is this patch not needed anymore? You can just delete the line then.
Not sure why it was needed in the first place, but it builds and runs fine without it.
Quoted 8 lines
Quoted 6 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 13
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ " + +IMVER = "6.7.2-3"I think the old recipes strip the
-3to get the correct directory names. This wayIMVERis equal toPN.The build does not succeed without the -3 in it
What was the error? But as noted below, they seem to have changed the directory name in the source archive.
Quoted 34 lines
Quoted 5 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 11
Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2
-0+ +S = "${WORKDIR}/ImageMagick-${IMVER}"It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.
This line has been removed with success
Quoted 18 lines
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/ ImageMagick-6.4.4 temp$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/ ImageMagick-6.7.2-3 temprecipes/imagemagick/imagemagick_6.7.2-3.bb line 24
Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9
-0+ +inherit autotools binconfig pkgconfig + +EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp" + +FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \ + ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \ + ${libdir}/ImageMagick-${IMVER}/config/ \ + ${datadir}/ImageMagick-${IMVER}"Could you please look into the following warnings.
Quoted 7 lines
NOTE: package imagemagick-6.7.2-3-r1: task
do_qa_staging: Succeeded
WARNING: the following files were installed but not shipped in any package:
WARNING:/usr/share/ImageMagick-6.7.2/francais.xml
WARNING:/usr/share/ImageMagick-6.7.2/locale.xml
WARNING:/usr/share/ImageMagick-6.7.2/english.xml
WARNING:/usr/share/ImageMagick-6.7.2/configure.xml
Quoted 3 lines
Not sure where those warnings show up for you, I don't get them during the build, is there some kind of extra warnings flag I should be using?
I am using minimal (EGLIBC) for MACHINE = "beagleboard". Are these files included in your final package?
Quoted 6 lines
Quoted 3 lines
Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where
IMVERshould be used and wherePV, which is 6.7.2-3.Not sure what you mean by this. As stated the build fails without the -3 on the IMVER
As seen with the warnings above, there seems to be a directory where the -3 needs to be stripped. You should use PV instead of IMVER where possible like below too.
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4
-0+ +FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a" + +FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
Quoted 8 lines
Quoted 8 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 36
Quoted 8 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +8
-0+ +BBCLASSEXTEND = "native" + +LEAD_SONAME = "libMagickCore.so.*" + + +SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea" +SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"
Thanks,
Paul
Quoted 2 lines
Am Freitag, den 07.10.2011, 18:58 +0200 schrieb Paul Menzel:
Quoted 75 lines
Am Freitag, den 07.10.2011, 09:38 -0700 schrieb Gavin Swanson:
Quoted 1 line
This is my first attempt at submitting a patch. Please bear with me.
I will. Thank you for following up on my review comments.
Quoted 42 lines
I read through the style guide and used the oe-stylize script on my changed version. I still have some questions.
Quoted 24 lines · Paul Menzel
Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:
Quoted 1 line
From: Gavin Swanson <[email protected]>
Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)
Change the commit summary to
imagemagick: Add version 6.7.2-3
and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.
You seem to have used an existing recipe as a template. Please note that too.
At last please add you Signed-off-by line.
Quoted 5 lines
--- recipes/imagemagick/imagemagick_6.7.2-3.bb | 36 ++++++++++++++++++++++++++++ 1 files changed, 36 insertions(+), 0 deletions(-) create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bbQuoted 12 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 3
Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0@@ -0,0 +1,36 @@ +DESCRIPTION = "ImageMagick is an image convertion tools" +SECTION = "console/utils" +LICENSE = "GPL"I updated those meta fields in the repository. Please update the above too.
Quoted 1 line
I'm using the gumstix repo,
Please include such information in your commit message.
Quoted 2 lines
so I didn't have these changes, I looked them up though and have included them.
Great. I am sorry for the hassle.
[…]
Quoted 17 lines
Quoted 6 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 10
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ +SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \ +# file://PerlMagic_MakePatch;apply=yes \Why is this patch not needed anymore? You can just delete the line then.
Not sure why it was needed in the first place, but it builds and runs fine without it.
Quoted 6 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 13
Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3
-0+ " + +IMVER = "6.7.2-3"I think the old recipes strip the
-3to get the correct directory names. This wayIMVERis equal toPN.
Quoted 12 lines
Quoted 1 line
The build does not succeed without the -3 in it
What was the error? But as noted below, they seem to have changed the directory name in the source archive.
Quoted 7 lines
Quoted 5 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 11
Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2
-0+ +S = "${WORKDIR}/ImageMagick-${IMVER}"It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.
This line has been removed with success
Are you sure? Testing this, it looks like the default is to make everything lower case and it broke for me.
| + do_install | + autotools_do_install | + oe_runmake DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install | + oenote make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install | + echo NOTE: 'make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install' | NOTE: make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install | + make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install | make: *** No rule to make target `install'. Stop. | + die 'oe_runmake failed' | + oefatal 'oe_runmake failed' | + echo FATAL: 'oe_runmake failed' | FATAL: oe_runmake failed | + exit 1
Quoted 37 lines
Quoted 26 lines
Quoted 18 lines
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/ ImageMagick-6.4.4 temp$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/ ImageMagick-6.7.2-3 temprecipes/imagemagick/imagemagick_6.7.2-3.bb line 24
Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9
-0+ +inherit autotools binconfig pkgconfig + +EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp" + +FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \ + ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \ + ${libdir}/ImageMagick-${IMVER}/config/ \ + ${datadir}/ImageMagick-${IMVER}"Could you please look into the following warnings.
Quoted 7 lines
NOTE: package imagemagick-6.7.2-3-r1: task
do_qa_staging: Succeeded
WARNING: the following files were installed but not shipped in any package:
WARNING:/usr/share/ImageMagick-6.7.2/francais.xml
WARNING:/usr/share/ImageMagick-6.7.2/locale.xml
WARNING:/usr/share/ImageMagick-6.7.2/english.xml
WARNING:/usr/share/ImageMagick-6.7.2/configure.xmlQuoted 3 lines
Not sure where those warnings show up for you, I don't get them during the build, is there some kind of extra warnings flag I should be using?
I am using
minimal(EGLIBC) forMACHINE = "beagleboard". Are these files included in your final package?Quoted 4 lines
Quoted 3 lines
Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where
IMVERshould be used and wherePV, which is 6.7.2-3.
Quoted 6 lines
Quoted 2 lines
Not sure what you mean by this. As stated the build fails without the -3 on the IMVER
As seen with the warnings above, there seems to be a directory where the
-3needs to be stripped. You should usePVinstead ofIMVERwhere possible like below too.
So currently I think the following should be correct.
IMVER = "6.7.2"
S = "${WORKDIR}/ImageMagick-${PV}"Maybe safe the current directory packages-split/ somewhere and compare it with the changes above.
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4
-0+ +FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a" + +FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb line 36
Quoted 8 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +8
-0+ +BBCLASSEXTEND = "native" + +LEAD_SONAME = "libMagickCore.so.*" + + +SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea" +SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"
Thanks,
Paul
Quoted 2 lines
Quoted 2 lines