Skip to contentSkip to conversation

Added ImageMagick 6.7.2-3

PATCH In review [email protected] 2 participants 5 messages Oct 6, 2011 – Oct 7, 2011

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Added ImageMagick 6.7.2-3

From: Gavin Swanson <[email protected]>

---
 recipes/imagemagick/imagemagick_6.7.2-3.bb |   36 ++++++++++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)
 create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bb
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +36 -0
new file mode 100644
index 0000000..14746c9
@@ -0,0 +1,36 @@
+DESCRIPTION = "ImageMagick is an image convertion tools"
+SECTION = "console/utils"
+LICENSE = "GPL"
+# FIXME: There is much more checked libraries. All should be added or explicitly disabled to get consistent results.
+DEPENDS = "lcms bzip2 jpeg libpng librsvg tiff zlib"
+
+PR = "r1"
+
+SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \
+#           file://PerlMagic_MakePatch;apply=yes \
+          "
+
+IMVER = "6.7.2-3"
+
+S = "${WORKDIR}/ImageMagick-${IMVER}"
+
+inherit autotools binconfig pkgconfig
+
+EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp"
+
+FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \
+                ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \
+                ${libdir}/ImageMagick-${IMVER}/config/ \
+                ${datadir}/ImageMagick-${IMVER}"
+
+FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a"
+
+FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
+
+BBCLASSEXTEND = "native"
+
+LEAD_SONAME = "libMagickCore.so.*"
+
+
+SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea"
+SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"
Signature · 1 line
1.7.1
#1 lore raw

Dear Gavin,

thank you for your patch.

Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:

Quoted 1 line

From: Gavin Swanson <[email protected]>

Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)

Change the commit summary to

imagemagick: Add version 6.7.2-3

and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.

You seem to have used an existing recipe as a template. Please note that too.

At last please add you Signed-off-by line.

Quoted 11 lines
---
 recipes/imagemagick/imagemagick_6.7.2-3.bb |   36 ++++++++++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)
 create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bb
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +0 -0
new file mode 100644
index 0000000..14746c9

recipes/imagemagick/imagemagick_6.7.2-3.bb line 3

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
@@ -0,0 +1,36 @@
+DESCRIPTION = "ImageMagick is an image convertion tools"
+SECTION = "console/utils"
+LICENSE = "GPL"

I updated those meta fields in the repository. Please update the above too.

recipes/imagemagick/imagemagick_6.7.2-3.bb line 7

Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4 -0
+# FIXME: There is much more checked libraries. All should be added or explicitly disabled to get consistent results.
+DEPENDS = "lcms bzip2 jpeg libpng librsvg tiff zlib"
+
+PR = "r1"

Please start with r0.

recipes/imagemagick/imagemagick_6.7.2-3.bb line 10

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+
+SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \
+#           file://PerlMagic_MakePatch;apply=yes \

Why is this patch not needed anymore? You can just delete the line then.

recipes/imagemagick/imagemagick_6.7.2-3.bb line 13

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+          "
+
+IMVER = "6.7.2-3"

I think the old recipes strip the -3 to get the correct directory names. This way IMVER is equal to PN.

recipes/imagemagick/imagemagick_6.7.2-3.bb line 15

Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2 -0
+
+S = "${WORKDIR}/ImageMagick-${IMVER}"

It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.

$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/
ImageMagick-6.4.4  temp
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/
ImageMagick-6.7.2-3  temp

recipes/imagemagick/imagemagick_6.7.2-3.bb line 24

Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9 -0
+
+inherit autotools binconfig pkgconfig
+
+EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp"
+
+FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \
+                ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \
+                ${libdir}/ImageMagick-${IMVER}/config/ \
+                ${datadir}/ImageMagick-${IMVER}"

Could you please look into the following warnings.

NOTE: package imagemagick-6.7.2-3-r1: task do_qa_staging: Succeeded
WARNING: the following files were installed but not shipped in any package:
WARNING: /usr/share/ImageMagick-6.7.2/francais.xml
WARNING: /usr/share/ImageMagick-6.7.2/locale.xml
WARNING: /usr/share/ImageMagick-6.7.2/english.xml
WARNING: /usr/share/ImageMagick-6.7.2/configure.xml

Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where IMVER should be used and where PV, which is 6.7.2-3.

recipes/imagemagick/imagemagick_6.7.2-3.bb line 36

Quoted 12 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +12 -0
+
+FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a"
+
+FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
+
+BBCLASSEXTEND = "native"
+
+LEAD_SONAME = "libMagickCore.so.*"
+
+
+SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea"
+SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"

Thanks,

Paul

[1] http://www.openembedded.org/wiki/Commit_Policy
[2] http://www.openembedded.org/index.php?title=Styleguide

#2 lore raw

This is my first attempt at submitting a patch. Please bear with me. I read through the style guide and used the oe-stylize script on my changed version. I still have some questions.

Quoted 29 lines · Paul Menzel

Dear Gavin,

thank you for your patch.

Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:

Quoted 1 line

From: Gavin Swanson <[email protected]>

Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)

Change the commit summary to

       imagemagick: Add version 6.7.2-3

and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.

You seem to have used an existing recipe as a template. Please note that too.

At last please add you Signed-off-by line.

Quoted 5 lines

---
 recipes/imagemagick/imagemagick_6.7.2-3.bb |   36 ++++++++++++++++++++++++++++

 1 files changed, 36 insertions(+), 0 deletions(-)

 create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bb

Quoted 12 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 3

Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
new file mode 100644
index 0000000..14746c9
@@ -0,0 +1,36 @@
+DESCRIPTION = "ImageMagick is an image convertion tools"
+SECTION = "console/utils"
+LICENSE = "GPL"

I updated those meta fields in the repository. Please update the above too.

I'm using the gumstix repo, so I didn't have these changes, I looked them up though and have included them.

Quoted 7 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 7

Quoted 5 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4 -0
+# FIXME: There is much more checked libraries. All should be added or explicitly disabled to get consistent results.
+DEPENDS = "lcms bzip2 jpeg libpng librsvg tiff zlib"
+
+PR = "r1"

Please start with r0.

Done

Quoted 7 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 10

Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+
+SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \
+#           file://PerlMagic_MakePatch;apply=yes \

Why is this patch not needed anymore? You can just delete the line then.

Not sure why it was needed in the first place, but it builds and runs fine without it.

Quoted 6 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 13

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+          "
+
+IMVER = "6.7.2-3"

I think the old recipes strip the -3 to get the correct directory names. This way IMVER is equal to PN.

The build does not succeed without the -3 in it

Quoted 6 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 15

Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2 -0
+
+S = "${WORKDIR}/ImageMagick-${IMVER}"

It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.

This line has been removed with success

Quoted 18 lines
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/
ImageMagick-6.4.4  temp
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/
ImageMagick-6.7.2-3  temp

recipes/imagemagick/imagemagick_6.7.2-3.bb line 24

Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9 -0
+
+inherit autotools binconfig pkgconfig
+
+EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp"
+
+FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \
+                ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \
+                ${libdir}/ImageMagick-${IMVER}/config/ \
+                ${datadir}/ImageMagick-${IMVER}"

Could you please look into the following warnings.

Quoted 7 lines

       NOTE: package imagemagick-6.7.2-3-r1: task do_qa_staging: Succeeded
       WARNING: the following files were installed but not shipped in any package:
       WARNING:   /usr/share/ImageMagick-6.7.2/francais.xml
       WARNING:   /usr/share/ImageMagick-6.7.2/locale.xml
       WARNING:   /usr/share/ImageMagick-6.7.2/english.xml
       WARNING:   /usr/share/ImageMagick-6.7.2/configure.xml

Not sure where those warnings show up for you, I don't get them during the build, is there some kind of extra warnings flag I should be using?

Quoted 4 lines

Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where IMVER should be used and where PV, which is 6.7.2-3.

Not sure what you mean by this. As stated the build fails without the -3 on the IMVER

Quoted 28 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 36

Quoted 12 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +12 -0
+
+FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a"
+
+FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
+
+BBCLASSEXTEND = "native"
+
+LEAD_SONAME = "libMagickCore.so.*"
+
+
+SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea"
+SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"

Thanks,

Paul

[1] http://www.openembedded.org/wiki/Commit_Policy
[2] http://www.openembedded.org/index.php?title=Styleguide

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

#3 lore raw

Am Freitag, den 07.10.2011, 09:38 -0700 schrieb Gavin Swanson:

Quoted 1 line

This is my first attempt at submitting a patch. Please bear with me.

I will. Thank you for following up on my review comments.

Quoted 42 lines

I read through the style guide and used the oe-stylize script on my changed version. I still have some questions.

Quoted 24 lines · Paul Menzel

Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:

Quoted 1 line

From: Gavin Swanson <[email protected]>

Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)

Change the commit summary to

imagemagick: Add version 6.7.2-3

and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.

You seem to have used an existing recipe as a template. Please note that too.

At last please add you Signed-off-by line.

Quoted 5 lines
---
 recipes/imagemagick/imagemagick_6.7.2-3.bb |   36 ++++++++++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)
 create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bb
Quoted 12 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 3

Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
new file mode 100644
index 0000000..14746c9
@@ -0,0 +1,36 @@
+DESCRIPTION = "ImageMagick is an image convertion tools"
+SECTION = "console/utils"
+LICENSE = "GPL"

I updated those meta fields in the repository. Please update the above too.

Quoted 1 line

I'm using the gumstix repo,

Please include such information in your commit message.

Quoted 2 lines

so I didn't have these changes, I looked them up though and have included them.

Great. I am sorry for the hassle.

[…]

Quoted 10 lines
Quoted 6 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 10

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+
+SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \
+#           file://PerlMagic_MakePatch;apply=yes \

Why is this patch not needed anymore? You can just delete the line then.

Not sure why it was needed in the first place, but it builds and runs fine without it.

Quoted 8 lines
Quoted 6 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 13

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+          "
+
+IMVER = "6.7.2-3"

I think the old recipes strip the -3 to get the correct directory names. This way IMVER is equal to PN.

The build does not succeed without the -3 in it

What was the error? But as noted below, they seem to have changed the directory name in the source archive.

Quoted 34 lines
Quoted 5 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 11

Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2 -0
+
+S = "${WORKDIR}/ImageMagick-${IMVER}"

It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.

This line has been removed with success

Quoted 18 lines
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/
ImageMagick-6.4.4  temp
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/
ImageMagick-6.7.2-3  temp

recipes/imagemagick/imagemagick_6.7.2-3.bb line 24

Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9 -0
+
+inherit autotools binconfig pkgconfig
+
+EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp"
+
+FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \
+                ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \
+                ${libdir}/ImageMagick-${IMVER}/config/ \
+                ${datadir}/ImageMagick-${IMVER}"

Could you please look into the following warnings.

Quoted 7 lines

NOTE: package imagemagick-6.7.2-3-r1: task do_qa_staging: Succeeded
WARNING: the following files were installed but not shipped in any package:
WARNING: /usr/share/ImageMagick-6.7.2/francais.xml
WARNING: /usr/share/ImageMagick-6.7.2/locale.xml
WARNING: /usr/share/ImageMagick-6.7.2/english.xml
WARNING: /usr/share/ImageMagick-6.7.2/configure.xml

Quoted 3 lines

Not sure where those warnings show up for you, I don't get them during the build, is there some kind of extra warnings flag I should be using?

I am using minimal (EGLIBC) for MACHINE = "beagleboard". Are these files included in your final package?

Quoted 6 lines
Quoted 3 lines

Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where IMVER should be used and where PV, which is 6.7.2-3.

Not sure what you mean by this. As stated the build fails without the -3 on the IMVER

As seen with the warnings above, there seems to be a directory where the -3 needs to be stripped. You should use PV instead of IMVER where possible like below too.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4 -0
+
+FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a"
+
+FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
Quoted 8 lines
Quoted 8 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 36

Quoted 8 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +8 -0
+
+BBCLASSEXTEND = "native"
+
+LEAD_SONAME = "libMagickCore.so.*"
+
+
+SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea"
+SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"

Thanks,

Paul

Quoted 2 lines
Quoted 2 lines

[1] http://www.openembedded.org/wiki/Commit_Policy
[2] http://www.openembedded.org/index.php?title=Styleguide

#4 lore raw

Am Freitag, den 07.10.2011, 18:58 +0200 schrieb Paul Menzel:

Quoted 75 lines

Am Freitag, den 07.10.2011, 09:38 -0700 schrieb Gavin Swanson:

Quoted 1 line

This is my first attempt at submitting a patch. Please bear with me.

I will. Thank you for following up on my review comments.

Quoted 42 lines

I read through the style guide and used the oe-stylize script on my changed version. I still have some questions.

Quoted 24 lines · Paul Menzel

Am Donnerstag, den 06.10.2011, 16:01 -0700 schrieb [email protected]:

Quoted 1 line

From: Gavin Swanson <[email protected]>

Please refer to our commit policy [1] and style guide [2]. (Unfortunately the Wiki is down at the moment.)

Change the commit summary to

imagemagick: Add version 6.7.2-3

and add some more information to the commit message. What distribution and machine did you use for testing? Have you run tested the new version.

You seem to have used an existing recipe as a template. Please note that too.

At last please add you Signed-off-by line.

Quoted 5 lines
---
 recipes/imagemagick/imagemagick_6.7.2-3.bb |   36 ++++++++++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)
 create mode 100644 recipes/imagemagick/imagemagick_6.7.2-3.bb
Quoted 12 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 3

Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
new file mode 100644
index 0000000..14746c9
@@ -0,0 +1,36 @@
+DESCRIPTION = "ImageMagick is an image convertion tools"
+SECTION = "console/utils"
+LICENSE = "GPL"

I updated those meta fields in the repository. Please update the above too.

Quoted 1 line

I'm using the gumstix repo,

Please include such information in your commit message.

Quoted 2 lines

so I didn't have these changes, I looked them up though and have included them.

Great. I am sorry for the hassle.

[…]

Quoted 17 lines
Quoted 6 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 10

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+
+SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}.tar.bz2 \
+#           file://PerlMagic_MakePatch;apply=yes \

Why is this patch not needed anymore? You can just delete the line then.

Not sure why it was needed in the first place, but it builds and runs fine without it.

Quoted 6 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 13

Quoted 3 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +3 -0
+          "
+
+IMVER = "6.7.2-3"

I think the old recipes strip the -3 to get the correct directory names. This way IMVER is equal to PN.

Quoted 12 lines
Quoted 1 line

The build does not succeed without the -3 in it

What was the error? But as noted below, they seem to have changed the directory name in the source archive.

Quoted 7 lines
Quoted 5 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 11

Quoted 2 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +2 -0
+
+S = "${WORKDIR}/ImageMagick-${IMVER}"

It looks like you can delete this line for this version, since in your version the archive seems to have a “correctly” named folder included.

This line has been removed with success

Are you sure? Testing this, it looks like the default is to make everything lower case and it broke for me.

| + do_install
| + autotools_do_install
| + oe_runmake DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install
| + oenote make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install
| + echo NOTE: 'make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install'
| NOTE: make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install
| + make DESTDIR=/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/imagemagick-6.7.2-3-r1/image install
| make: *** No rule to make target `install'.  Stop.
| + die 'oe_runmake failed'
| + oefatal 'oe_runmake failed'
| + echo FATAL: 'oe_runmake failed'
| FATAL: oe_runmake failed
| + exit 1
Quoted 37 lines
Quoted 26 lines
Quoted 18 lines
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.4.4-1-r7/
ImageMagick-6.4.4  temp
$ ls minimal-dev/work/armv7a-oe-linux-gnueabi/imagemagick-6.7.2-3-r1/
ImageMagick-6.7.2-3  temp

recipes/imagemagick/imagemagick_6.7.2-3.bb line 24

Quoted 9 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +9 -0
+
+inherit autotools binconfig pkgconfig
+
+EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp"
+
+FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \
+                ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \
+                ${libdir}/ImageMagick-${IMVER}/config/ \
+                ${datadir}/ImageMagick-${IMVER}"

Could you please look into the following warnings.

Quoted 7 lines

NOTE: package imagemagick-6.7.2-3-r1: task do_qa_staging: Succeeded
WARNING: the following files were installed but not shipped in any package:
WARNING: /usr/share/ImageMagick-6.7.2/francais.xml
WARNING: /usr/share/ImageMagick-6.7.2/locale.xml
WARNING: /usr/share/ImageMagick-6.7.2/english.xml
WARNING: /usr/share/ImageMagick-6.7.2/configure.xml

Quoted 3 lines

Not sure where those warnings show up for you, I don't get them during the build, is there some kind of extra warnings flag I should be using?

I am using minimal (EGLIBC) for MACHINE = "beagleboard". Are these files included in your final package?

Quoted 4 lines
Quoted 3 lines

Here you can also see that the directory name seems to only include 6.7.2 instead of 6.7.2-3. So you should check where IMVER should be used and where PV, which is 6.7.2-3.

Quoted 6 lines
Quoted 2 lines

Not sure what you mean by this. As stated the build fails without the -3 on the IMVER

As seen with the warnings above, there seems to be a directory where the -3 needs to be stripped. You should use PV instead of IMVER where possible like below too.

So currently I think the following should be correct.

        IMVER = "6.7.2"
        
        S = "${WORKDIR}/ImageMagick-${PV}"

Maybe safe the current directory packages-split/ somewhere and compare it with the changes above.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +4 -0
+
+FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a"
+
+FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

recipes/imagemagick/imagemagick_6.7.2-3.bb line 36

Quoted 8 lines
recipes/imagemagick/imagemagick_6.7.2-3.bb new file +8 -0
+
+BBCLASSEXTEND = "native"
+
+LEAD_SONAME = "libMagickCore.so.*"
+
+
+SRC_URI[md5sum] = "62e12090d2d385f4800c06f58f477bea"
+SRC_URI[sha256sum] = "50fe6e1af9e900e5d4bef45879a3a7e15512bb9ab3dbbafb521825359cb6d2c7"

Thanks,

Paul

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

[1] http://www.openembedded.org/wiki/Commit_Policy
[2] http://www.openembedded.org/index.php?title=Styleguide