Trivial: Fix typos in various parts of the kernel, and fix some comments.
Subsystems (38)
RFC v4 1/1 Trivial: Fix typos in various parts of the kernel, and fix some comments.
From: "Justin P. Mattock" <[email protected]>
Note:resend after some changes rev4.
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments. Please let me know if I missed anything, and I will try to get it changed and resent.
Signed-off-by Justin P. Mattock <[email protected]>
--- arch/arm/plat-omap/include/plat/serial.h | 2 +- arch/powerpc/include/asm/io.h | 2 +- arch/powerpc/include/asm/keylargo.h | 2 +- arch/powerpc/mm/numa.c | 2 +- arch/sparc/kernel/smp_64.c | 4 ++-- drivers/acpi/acpica/hwxface.c | 2 +- drivers/block/xen-blkback/xenbus.c | 2 +- drivers/char/ipmi/ipmi_bt_sm.c | 2 +- drivers/edac/ppc4xx_edac.c | 2 +- drivers/media/video/zoran/zoran_driver.c | 2 +- drivers/message/fusion/lsi/mpi_ioc.h | 2 +- drivers/net/irda/nsc-ircc.c | 2 +- drivers/net/irda/via-ircc.c | 4 ++-- drivers/net/irda/w83977af_ir.c | 2 +- drivers/net/wimax/i2400m/i2400m.h | 2 +- drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 4 ++-- drivers/parport/parport_mfc3.c | 2 +- drivers/scsi/aic7xxx/aicasm/aicasm.c | 2 +- drivers/scsi/ips.c | 2 +- drivers/scsi/qla4xxx/ql4_fw.h | 2 +- drivers/scsi/vmw_pvscsi.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3200.c | 2 +- drivers/staging/cxt1e1/libsbew.h | 2 +- drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 4 ++-- drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 2 +- drivers/staging/iio/industrialio-trigger.c | 2 +- drivers/staging/sep/sep_driver.c | 2 +- drivers/staging/tidspbridge/Kconfig | 2 +- drivers/staging/tidspbridge/rmgr/dbdcd.c | 2 +- drivers/usb/host/hwa-hc.c | 2 +- drivers/usb/host/imx21-hcd.c | 2 +- drivers/usb/otg/fsl_otg.c | 2 +- drivers/uwb/i1480/dfu/usb.c | 2 +- fs/btrfs/inode.c | 2 +- fs/ext3/inode.c | 2 +- fs/ext4/inode.c | 2 +- fs/nfsd/nfs4state.c | 2 +- fs/ocfs2/file.c | 2 +- fs/xfs/xfs_file.c | 6 +++--- fs/xfs/xfs_log_cil.c | 2 +- include/drm/drmP.h | 2 +- include/linux/wanrouter.h | 2 +- include/net/mac80211.h | 2 +- net/ipv4/ip_fragment.c | 2 +- net/mac80211/work.c | 2 +- net/sctp/endpointola.c | 2 +- tools/power/cpupower/debug/i386/intel_gsic.c | 2 +- 47 files changed, 53 insertions(+), 53 deletions(-)
arch/arm/plat-omap/include/plat/serial.h +1 -1
@@ -2,7 +2,7 @@* arch/arm/plat-omap/include/mach/serial.h * * Copyright (C) 2009 Texas Instruments -* Addded OMAP4 support- Santosh Shilimkar <[email protected]> +* Added OMAP4 support- Santosh Shilimkar <[email protected]> * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of
arch/powerpc/include/asm/io.h +1 -1
@@ -394,7 +394,7 @@ __do_out_asm(_rec_outl, "stwbrx")#endif /* CONFIG_PPC32 */ /* The "__do_*" operations below provide the actual "base" implementation -* for each of the defined acccessor. Some of them use the out_* functions +* for each of the defined accessor. Some of them use the out_* functions * directly, some of them still use EEH, though we might change that in the * future. Those macros below provide the necessary argument swapping and * handling of the IO base for PIO.
arch/powerpc/include/asm/keylargo.h +1 -1
@@ -51,7 +51,7 @@#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) -/* Hrm... this one is only to be used on Pismo. It seeem to also +/* Hrm... this one is only to be used on Pismo. It seems to also * control the timebase enable on other machines. Still to be * experimented... --BenH. */
arch/powerpc/mm/numa.c +1 -1
@@ -521,7 +521,7 @@ static int of_get_assoc_arrays(struct device_node *memory, aa->n_arrays = *prop++; aa->array_sz = *prop++; -/* Now that we know the number of arrrays and size of each array, +/* Now that we know the number of arrays and size of each array, * revalidate the size of the property read in. */ if (len < (aa->n_arrays * aa->array_sz +2 ) *sizeof (unsigned int ))
arch/sparc/kernel/smp_64.c +2 -2
@@ -840,9 +840,9 @@ static void tsb_sync(void *info)struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id ()];struct mm_struct *mm = info; -/* It is not valid to test "currrent->active_mm == mm" here. +/* It is not valid to test "current->active_mm == mm" here. * -* The value of "current" is not changed atomically with +* The value of "current" is not changed automatically with * switch_mm(). But that's OK, we just need to check the * current cpu's trap block PGD physical address. */
drivers/acpi/acpica/hwxface.c +1 -1
@@ -356,7 +356,7 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register)* * PARAMETERS: register_id - ID of ACPI Bit Register to access * Value - Value to write to the register, in bit -* position zero. The bit is automaticallly +* position zero. The bit is automatically * shifted to the correct position. * * RETURN: Status
drivers/block/xen-blkback/xenbus.c +1 -1
@@ -613,7 +613,7 @@ static void frontend_changed(struct xenbus_device *dev,case XenbusStateConnected:/* * Ensure we connect even when two watches fire in -* close successsion and we miss the intermediate value +* close succession and we miss the intermediate value * of frontend_state. */ if (dev->state == XenbusStateConnected)
drivers/char/ipmi/ipmi_bt_sm.c +1 -1
@@ -560,7 +560,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)BT_CONTROL (BT_H_BUSY );/* set */ /* -* Uncached, ordered writes should just proceeed serially but +* Uncached, ordered writes should just proceed serially but * some BMCs don't clear B2H_ATN with one hit. Fast-path a * workaround without too much penalty to the general case. */
drivers/edac/ppc4xx_edac.c +1 -1
@@ -142,7 +142,7 @@/* * The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are -* indirectly acccessed and have a base and length defined by the +* indirectly accessed and have a base and length defined by the * device tree. The base can be anything; however, we expect the * length to be precisely two registers, the first for the address * window and the second for the data window.
drivers/media/video/zoran/zoran_driver.c +1 -1
@@ -1550,7 +1550,7 @@ static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)if (zoran_formats[i].flags & flag && num++ == fmt->index) {strncpy (fmt->description, zoran_formats[i].name,sizeof (fmt->description) -1 ); -/* fmt struct pre-zeroed, so adding '\0' not neeed */ +/* fmt struct pre-zeroed, so adding '\0' not need */ fmt->pixelformat = zoran_formats[i].fourcc;if (zoran_formats[i].flags &ZORAN_FORMAT_COMPRESSED ) fmt->flags |=V4L2_FMT_FLAG_COMPRESSED ;
drivers/message/fusion/lsi/mpi_ioc.h +1 -1
@@ -857,7 +857,7 @@ typedef struct _EVENT_DATA_SAS_DISCOVERY#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000)#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16) -/* SAS Discovery Errror Event data */ +/* SAS Discovery Error Event data */ typedef struct _EVENT_DATA_DISCOVERY_ERROR {
drivers/net/irda/nsc-ircc.c +1 -1
@@ -1664,7 +1664,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)switch_bank (iobase,BANK0 );outb (inb (iobase+MCR ) & ~MCR_DMA_EN , iobase+MCR ); -/* Check for underrrun! */ +/* Check for underrun! */ if (inb (iobase+ASCR ) &ASCR_TXUR ) { self->netdev->stats.tx_errors++; self->netdev->stats.tx_fifo_errors++;
drivers/net/irda/via-ircc.c +2 -2
@@ -942,14 +942,14 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self) iobase = self->io.fir_base;/* Disable DMA */ // DisableDmaChannel(self->io.dma); -/* Check for underrrun! */ +/* Check for underrun! */ /* Clear bit, by writing 1 into it */ Tx_status =GetTXStatus (iobase);if (Tx_status &0x08 ) { self->netdev->stats.tx_errors++; self->netdev->stats.tx_fifo_errors++;hwreset (self); -// how to clear underrrun ? +/* how to clear underrun? */ }else { self->netdev->stats.tx_packets++;ResetChip (iobase,3 );
drivers/net/irda/w83977af_ir.c +1 -1
@@ -677,7 +677,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)switch_bank (iobase,SET0 );outb (inb (iobase+HCR ) & ~HCR_EN_DMA , iobase+HCR ); -/* Check for underrrun! */ +/* Check for underrun! */ if (inb (iobase+AUDR ) &AUDR_UNDR ) {IRDA_DEBUG (0 ,"%s(), Transmit underrun!\n" , __func__ );
drivers/net/wimax/i2400m/i2400m.h +1 -1
@@ -75,7 +75,7 @@* device is up and running or shutdown (through ifconfig up / * down). Bus-generic only. * -* - control ops: control.c - implements various commmands for +* - control ops: control.c - implements various commands for * controlling the device. bus-generic only. * * - device model glue: driver.c - implements helpers for the
drivers/net/wireless/rtlwifi/rtl8192de/hw.c +2 -2
@@ -466,8 +466,8 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)bool int_migration = *(bool *) (val);if (int_migration) { -/* Set interrrupt migration timer and -* corresponging Tx/Rx counter. +/* Set interrupt migration timer and +* corresponding Tx/Rx counter. * timer 25ns*0xfa0=100us for 0xf packets. * 0x306:Rx, 0x307:Tx */ rtl_write_dword (rtlpriv,REG_INT_MIG ,0xfe000fa0 );
drivers/parport/parport_mfc3.c +1 -1
@@ -397,7 +397,7 @@ static void __exit parport_mfc3_exit(void)MODULE_AUTHOR ("Joerg Dorchain <[email protected]>" ); -MODULE_DESCRIPTION ("Parport Driver for Multiface 3 expansion cards Paralllel Port" ); +MODULE_DESCRIPTION ("Parport Driver for Multiface 3 expansion cards Parallel Port" );MODULE_SUPPORTED_DEVICE ("Multiface 3 Parallel Port" );MODULE_LICENSE ("GPL" );
drivers/scsi/aic7xxx/aicasm/aicasm.c +1 -1
@@ -1,5 +1,5 @@/* -* Aic7xxx SCSI host adapter firmware asssembler +* Aic7xxx SCSI host adapter firmware assembler * * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. * Copyright (c) 2001, 2002 Adaptec Inc.
drivers/scsi/ips.c +1 -1
@@ -4494,7 +4494,7 @@ ips_init_scb(ips_ha_t * ha, ips_scb_t * scb)/* */ /* Initialize a CCB to default values */ /* */ -/* ASSUMED to be callled from within a lock */ +/* ASSUMED to be called from within a lock */ /* */ /****************************************************************************/ static ips_scb_t *
drivers/scsi/qla4xxx/ql4_fw.h +1 -1
@@ -744,7 +744,7 @@ struct dev_db_entry {uint8_t res4[0x36 ];/* 8A-BF */ uint8_t iscsi_name[0xE0 ];/* C0-19F : xxzzy Make this a * pointer to a string so we -* don't have to reserve soooo +* don't have to reserve so * much RAM */ uint8_t link_local_ipv6_addr[0x10 ];/* 1A0-1AF */ uint8_t res5[0x10 ];/* 1B0-1BF */
drivers/scsi/vmw_pvscsi.c +1 -1
@@ -1144,7 +1144,7 @@ static void pvscsi_release_resources(struct pvscsi_adapter *adapter)* * These are statically allocated. Trying to be clever was not worth it. * -* Dynamic allocation can fail, and we can't go deeep into the memory +* Dynamic allocation can fail, and we can't go deep into the memory * allocator, since we're a SCSI driver, and trying too hard to allocate * memory might generate disk I/O. We also don't want to fail disk I/O * in that case because we can't get an allocation - the I/O could be
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +1 -1
@@ -3598,7 +3598,7 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) n =comedi_buf_write_alloc (s->async, (7 +12 ) *sizeof (unsigned int )); -/* If not enougth memory available, event is set to Comedi Buffer Errror */ +/* If not enough memory available, event is set to Comedi Buffer Error */ if (n > ((7 +12 ) *sizeof (unsigned int ))) {printk ("\ncomedi_buf_write_alloc n = %i" , n); s->async->events |=COMEDI_CB_ERROR ;
drivers/staging/cxt1e1/libsbew.h +1 -1
@@ -323,7 +323,7 @@ struct sbecom_port_param#define CFG_CH_DINV_TX 0x02 -/* Posssible resettable chipsets/functions */ +/* Possible resettable chipsets/functions */ #define RESET_DEV_TEMUX 1#define RESET_DEV_TECT3 RESET_DEV_TEMUX#define RESET_DEV_PLL 2
drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c +2 -2
@@ -344,10 +344,10 @@ static void ft1000_reset_asic(struct net_device *dev) }mdelay (1 );if (info->AsicID ==ELECTRABUZZ_ID ) { -// set watermark to -1 in order to not generate an interrrupt +// set watermark to -1 in order to not generate an interrupt ft1000_write_reg (dev,FT1000_REG_WATERMARK ,0xffff ); }else { -// set watermark to -1 in order to not generate an interrrupt +// set watermark to -1 in order to not generate an interrupt ft1000_write_reg (dev,FT1000_REG_MAG_WATERMARK ,0xffff ); }// clear interrupts
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c +1 -1
@@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev)mdelay (1 ); -/* set watermark to -1 in order to not generate an interrrupt */ +/* set watermark to -1 in order to not generate an interrupt */ ft1000_write_register (ft1000dev,0xffff ,FT1000_REG_MAG_WATERMARK );/* clear interrupts */
drivers/staging/iio/industrialio-trigger.c +1 -1
@@ -295,7 +295,7 @@ void iio_dealloc_pollfunc(struct iio_poll_func *pf)EXPORT_SYMBOL_GPL (iio_dealloc_pollfunc);/** -* iio_trigger_read_currrent() - trigger consumer sysfs query which trigger +* iio_trigger_read_current() - trigger consumer sysfs query which trigger * * For trigger consumers the current_trigger interface allows the trigger * used by the device to be queried.
drivers/staging/sep/sep_driver.c +1 -1
@@ -1235,7 +1235,7 @@ static void sep_build_lli_table(struct sep_device *sep,/* Counter of lli array entry */ u32 array_counter; -/* Init currrent table data size and lli array entry counter */ +/* Init current table data size and lli array entry counter */ curr_table_data_size =0 ; array_counter =0 ; *num_table_entries_ptr =1 ;
drivers/staging/tidspbridge/Kconfig +1 -1
@@ -78,7 +78,7 @@ config TIDSPBRIDGE_NTFY_PWRERR bool "Notify power errors" depends on TIDSPBRIDGE help - Enable notifications to registered clients on the event of power errror + Enable notifications to registered clients on the event of power error trying to suspend bridge driver. Say Y, to signal this event as a fatal error, this will require a bridge restart to recover.
drivers/staging/tidspbridge/rmgr/dbdcd.c +1 -1
@@ -285,7 +285,7 @@ int dcd_enumerate_object(s32 index, enum dsp_dcdobjtype obj_type, enum_refs =0 ;/* -* TODO: Revisit, this is not an errror case but code +* TODO: Revisit, this is not an error case but code * expects non-zero value. */ status =ENODATA ;
drivers/usb/host/hwa-hc.c +1 -1
@@ -481,7 +481,7 @@ static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, encryption_value =0 ; } -/* Set the encryption type for commmunicating with the device */ +/* Set the encryption type for communicating with the device */ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), USB_REQ_SET_ENCRYPTION, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
drivers/usb/host/imx21-hcd.c +1 -1
@@ -473,7 +473,7 @@ static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep)/* End handling */ /* =========================================== */ -/* Endpoint now idle - release it's ETD(s) or asssign to queued request */ +/* Endpoint now idle - release it's ETD(s) or assign to queued request */ static void ep_idle (struct imx21 *imx21,struct ep_priv *ep_priv) {int i;
drivers/usb/otg/fsl_otg.c +1 -1
@@ -639,7 +639,7 @@ static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA)* Delayed pin detect interrupt processing. * * When the Mini-A cable is disconnected from the board, -* the pin-detect interrupt happens before the disconnnect +* the pin-detect interrupt happens before the disconnect * interrupts for the connected device(s). In order to * process the disconnect interrupt(s) prior to switching * roles, the pin-detect interrupts are delayed, and handled
drivers/uwb/i1480/dfu/usb.c +1 -1
@@ -104,7 +104,7 @@ void i1480_usb_destroy(struct i1480_usb *i1480_usb)* * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, * so we copy it to the local i1480 buffer before proceeding. In any -* case, we have a max size we can send, soooo. +* case, we have a max size we can send. */ static int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
fs/btrfs/inode.c +1 -1
@@ -1943,7 +1943,7 @@ enum btrfs_orphan_cleanup_state { };/* -* This is called in transaction commmit time. If there are no orphan +* This is called in transaction commit time. If there are no orphan * files in the subvolume, it removes orphan item and frees block_rsv * structure. */
fs/ext3/inode.c +1 -1
@@ -2490,7 +2490,7 @@ int ext3_can_truncate(struct inode *inode)* transaction, and VFS/VM ensures that ext3_truncate() cannot run * simultaneously on behalf of the same inode. * -* As we work through the truncate and commmit bits of it to the journal there +* As we work through the truncate and commit bits of it to the journal there * is one core, guiding principle: the file's tree must always be consistent on * disk. We must be able to restart the truncate after a crash. *
fs/ext4/inode.c +1 -1
@@ -3503,7 +3503,7 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)* transaction, and VFS/VM ensures that ext4_truncate() cannot run * simultaneously on behalf of the same inode. * -* As we work through the truncate and commmit bits of it to the journal there +* As we work through the truncate and commit bits of it to the journal there * is one core, guiding principle: the file's tree must always be consistent on * disk. We must be able to restart the truncate after a crash. *
fs/nfsd/nfs4state.c +1 -1
@@ -658,7 +658,7 @@ static int nfsd4_sanitize_slot_size(u32 size)/* * XXX: If we run out of reserved DRC memory we could (up to a point) * re-negotiate active sessions and reduce their slot usage to make -* rooom for new connections. For now we just fail the create session. +* room for new connections. For now we just fail the create session. */ static int nfsd4_get_drc_mem (int slotsize,u32 num) {
fs/ocfs2/file.c +1 -1
@@ -2108,7 +2108,7 @@ static int ocfs2_prepare_inode_for_write(struct file *file,* remove_suid() calls ->setattr without any hint that * we may have already done our cluster locking. Since * ocfs2_setattr() *must* take cluster locks to -* proceeed, this will lead us to recursively lock the +* proceed, this will lead us to recursively lock the * inode. There's also the dinode i_size state which * can be lost via setattr during extending writes (we * set inode->i_size at the end of a write. */
fs/xfs/xfs_file.c +3 -3
@@ -209,10 +209,10 @@ xfs_file_fsync(/* * First check if the VFS inode is marked dirty. All the dirtying -* of non-transactional updates no goes through mark_inode_dirty*, -* which allows us to distinguish beteeen pure timestamp updates +* of non-transactional updates do not go through mark_inode_dirty*, +* which allows us to distinguish between pure timestamp updates * and i_size updates which need to be caught for fdatasync. -* After that also theck for the dirty state in the XFS inode, which +* After that also check for the dirty state in the XFS inode, which * might gets cleared when the inode gets written out via the AIL * or xfs_iflush_cluster. */
fs/xfs/xfs_log_cil.c +1 -1
@@ -256,7 +256,7 @@ xfs_cil_prepare_item(* Insert the log items into the CIL and calculate the difference in space * consumed by the item. Add the space to the checkpoint ticket and calculate * if the change requires additional log metadata. If it does, take that space -* as well. Remove the amount of space we addded to the checkpoint ticket from +* as well. Remove the amount of space we added to the checkpoint ticket from * the current transaction ticket so that the accounting works out correctly. */ static void
include/drm/drmP.h +1 -1
@@ -820,7 +820,7 @@ struct drm_driver {* Specifically, the timestamp in @vblank_time should correspond as * closely as possible to the time when the first video scanline of * the video frame after the end of VBLANK will start scanning out, -* the time immmediately after end of the VBLANK interval. If the +* the time immediately after end of the VBLANK interval. If the * @crtc is currently inside VBLANK, this will be a time in the future. * If the @crtc is currently scanning out a frame, this will be the * past start time of the current scanout. This is meant to adhere
include/linux/wanrouter.h +1 -1
@@ -309,7 +309,7 @@ typedef struct wandev_conf#define WANOPT_EVEN 2/* CHDLC Protocol Options */ -/* DF Commmented out for now. +/* DF Commented out for now. #define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT #define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT
include/net/mac80211.h +1 -1
@@ -1423,7 +1423,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,* DOC: Beacon filter support * * Some hardware have beacon filter support to reduce host cpu wakeups -* which will reduce system power consumption. It usuallly works so that +* which will reduce system power consumption. It usually works so that * the firmware creates a checksum of the beacon but omits all constantly * changing elements (TSF, TIM etc). Whenever the checksum changes the * beacon is forwarded to the host, otherwise it will be just dropped. That
net/ipv4/ip_fragment.c +1 -1
@@ -392,7 +392,7 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb)/* Is this the final fragment? */ if ((flags &IP_MF ) ==0 ) {/* If we already have some bits beyond end -* or have different end, the segment is corrrupted. +* or have different end, the segment is corrupted. */ if (end < qp->q.len || ((qp->q.last_in &INET_FRAG_LAST_IN ) && end != qp->q.len))
net/mac80211/work.c +1 -1
@@ -1094,7 +1094,7 @@ static void ieee80211_work_work(struct work_struct *work) local->tmp_channel =NULL ;/* If tmp_channel wasn't operating channel, then * we need to go back on-channel. -* NOTE: If we can ever be here while scannning, +* NOTE: If we can ever be here while scanning, * or if the hw_config() channel config logic changes, * then we may need to do a more thorough check to see if * we still need to do a hardware config. Currently,
net/sctp/endpointola.c +1 -1
@@ -415,7 +415,7 @@ static void sctp_endpoint_bh_rcv(struct work_struct *work)sctp_subtype_t subtype;sctp_state_t state;int error =0 ; -int first_time =1 ;/* is this the first time through the looop */ +int first_time =1 ;/* is this the first time through the loop */ if (ep->base.dead)return ;
tools/power/cpupower/debug/i386/intel_gsic.c +1 -1
@@ -53,7 +53,7 @@ int main (void) "RISK.\n"); }if ((r.ebx &0xffff ) !=0xb2 ) { -printf ("non-default command port. If speedstep-smi " +printf ("non-default command port. If spedstep-smi " "doesn't work out of the box,\nyou may want to " "try out the default value by passing " "smi_port=0x82 to the module\n ON YOUR OWN "
Signature · 1 line
1.7.5.4
tools/power/cpupower/debug/i386/intel_gsic.c int main (void) · line 56
Quoted 8 lines · Justin P. Mattock
tools/power/cpupower/debug/i386/intel_gsic.c +1
-1@@ -53,7 +53,7 @@ int main (void) "RISK.\n"); }if ((r.ebx &0xffff ) !=0xb2 ) { - printf("non-default command port. If speedstep-smi " + printf("non-default command port. If spedstep-smi "
"spedstep"? Looks like your sed was too overzealous :)
Signature · 2 lines
Best regards, Dmitry "MAD" Artamonow