Fix typos in the kernel
Subsystems (14)
PATCH v2 1/3 Fix typos in the kernel
From: "Justin P. Mattock" <[email protected]>
Resend with changes.
The below patch fixes some typos that I have found in the kernel.
Signed-off-by Justin P. Mattock <[email protected]>
Cc J. Bruce Fields <[email protected]>
--- arch/arm/mach-omap2/smartreflex.c | 2 +- arch/arm/plat-omap/include/plat/serial.h | 2 +- arch/powerpc/include/asm/io.h | 2 +- arch/powerpc/include/asm/keylargo.h | 2 +- arch/powerpc/mm/numa.c | 2 +- arch/powerpc/platforms/embedded6xx/storcenter.c | 2 +- arch/sparc/kernel/smp_64.c | 2 +- drivers/acpi/acpica/hwxface.c | 2 +- drivers/base/regmap/regmap.c | 2 +- drivers/block/xen-blkback/xenbus.c | 2 +- drivers/char/ipmi/ipmi_bt_sm.c | 2 +- drivers/edac/ppc4xx_edac.c | 2 +- drivers/media/video/zoran/zoran_driver.c | 2 +- 13 files changed, 13 insertions(+), 13 deletions(-)
arch/arm/mach-omap2/smartreflex.c +1 -1
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)* driver register and sr device intializtion API's. Only one call * will ultimately succeed. * -* Currently this function registers interrrupt handler for a particular SR +* Currently this function registers interrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */
arch/arm/plat-omap/include/plat/serial.h +1 -1
@@ -2,7 +2,7 @@* arch/arm/plat-omap/include/mach/serial.h * * Copyright (C) 2009 Texas Instruments -* Addded OMAP4 support- Santosh Shilimkar <[email protected]> +* Added OMAP4 support- Santosh Shilimkar <[email protected]> * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of
arch/powerpc/include/asm/io.h +1 -1
@@ -394,7 +394,7 @@ __do_out_asm(_rec_outl, "stwbrx")#endif /* CONFIG_PPC32 */ /* The "__do_*" operations below provide the actual "base" implementation -* for each of the defined acccessor. Some of them use the out_* functions +* for each of the defined accessor. Some of them use the out_* functions * directly, some of them still use EEH, though we might change that in the * future. Those macros below provide the necessary argument swapping and * handling of the IO base for PIO.
arch/powerpc/include/asm/keylargo.h +1 -1
@@ -51,7 +51,7 @@#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) -/* Hrm... this one is only to be used on Pismo. It seeem to also +/* Hrm... this one is only to be used on Pismo. It seems to also * control the timebase enable on other machines. Still to be * experimented... --BenH. */
arch/powerpc/mm/numa.c +1 -1
@@ -511,7 +511,7 @@ static int of_get_assoc_arrays(struct device_node *memory, aa->n_arrays = *prop++; aa->array_sz = *prop++; -/* Now that we know the number of arrrays and size of each array, +/* Now that we know the number of arrays and size of each array, * revalidate the size of the property read in. */ if (len < (aa->n_arrays * aa->array_sz +2 ) *sizeof (unsigned int ))
arch/powerpc/platforms/embedded6xx/storcenter.c +1 -1
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void) }/* -* Interrupt setup and service. Interrrupts on the turbostation come +* Interrupt setup and service. Interrupts on the turbostation come * from the four PCI slots plus onboard 8241 devices: I2C, DUART. */ static void __init storcenter_init_IRQ (void )
arch/sparc/kernel/smp_64.c +1 -1
@@ -840,7 +840,7 @@ static void tsb_sync(void *info)struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id ()];struct mm_struct *mm = info; -/* It is not valid to test "currrent->active_mm == mm" here. +/* It is not valid to test "current->active_mm == mm" here. * * The value of "current" is not changed atomically with * switch_mm(). But that's OK, we just need to check the
drivers/acpi/acpica/hwxface.c +1 -1
@@ -355,7 +355,7 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register)* * PARAMETERS: register_id - ID of ACPI Bit Register to access * Value - Value to write to the register, in bit -* position zero. The bit is automaticallly +* position zero. The bit is automatically * shifted to the correct position. * * RETURN: Status
drivers/base/regmap/regmap.c +1 -1
@@ -309,7 +309,7 @@ static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val,/* * Some buses flag reads by setting the high bits in the -* register addresss; since it's always the high bits for all +* register address; since it's always the high bits for all * current formats we can do this here rather than in * formatting. This may break if we get interesting formats. */
drivers/block/xen-blkback/xenbus.c +1 -1
@@ -582,7 +582,7 @@ static void frontend_changed(struct xenbus_device *dev,case XenbusStateConnected:/* * Ensure we connect even when two watches fire in -* close successsion and we miss the intermediate value +* close succession and we miss the intermediate value * of frontend_state. */ if (dev->state == XenbusStateConnected)
drivers/char/ipmi/ipmi_bt_sm.c +1 -1
@@ -560,7 +560,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)BT_CONTROL (BT_H_BUSY );/* set */ /* -* Uncached, ordered writes should just proceeed serially but +* Uncached, ordered writes should just proceed serially but * some BMCs don't clear B2H_ATN with one hit. Fast-path a * workaround without too much penalty to the general case. */
drivers/edac/ppc4xx_edac.c +1 -1
@@ -142,7 +142,7 @@/* * The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are -* indirectly acccessed and have a base and length defined by the +* indirectly accessed and have a base and length defined by the * device tree. The base can be anything; however, we expect the * length to be precisely two registers, the first for the address * window and the second for the data window.
drivers/media/video/zoran/zoran_driver.c +1 -1
@@ -1550,7 +1550,7 @@ static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)if (zoran_formats[i].flags & flag && num++ == fmt->index) {strncpy (fmt->description, zoran_formats[i].name,sizeof (fmt->description) -1 ); -/* fmt struct pre-zeroed, so adding '\0' not neeed */ +/* fmt struct pre-zeroed, so adding '\0' not need */ fmt->pixelformat = zoran_formats[i].fourcc;if (zoran_formats[i].flags &ZORAN_FORMAT_COMPRESSED ) fmt->flags |=V4L2_FMT_FLAG_COMPRESSED ;
Signature · 1 line
1.7.6