Skip to contentSkip to conversation

m68knommu: make persistent clock code consistent with m68k

PATCH Superseded [email protected] 2 participants 5 messages Feb 7, 2012 – Feb 21, 2012

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 m68knommu: make persistent clock code consistent with m68k

From: Greg Ungerer <[email protected]>

The read_persistent_clock() code is different on m68knommu, for really no reason. With a few changes to support function names and some code re-organization the code can be made the same.

This will make it easier to merge the arch/m68k/kernel/time.c for m68k and m68knommu in a future patch.

---
 arch/m68k/include/asm/machdep.h     |    2 -
 arch/m68k/kernel/setup_no.c         |    2 +
 arch/m68k/kernel/time_no.c          |   36 +++++++++++-----------------------
 arch/m68k/platform/68328/config.c   |    5 ++-
 arch/m68k/platform/68328/timers.c   |   18 ++++++++++------
 arch/m68k/platform/68360/config.c   |    8 +------
 arch/m68k/platform/68EZ328/config.c |    5 ++-
 arch/m68k/platform/68VZ328/config.c |    5 ++-
 8 files changed, 35 insertions(+), 46 deletions(-)
arch/m68k/include/asm/machdep.h +0 -2
index 789f3b2..3bfa7df 100644
@@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void);
 extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
 extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
 extern int (*mach_set_clock_mmss)(unsigned long);
-extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
-			    int *min, int *sec);
 extern void (*mach_reset)( void );
 extern void (*mach_halt)( void );
 extern void (*mach_power_off)( void );
arch/m68k/kernel/setup_no.c +2 -0
index ca3df0d..8394b56 100644
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
+#include <linux/rtc.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -48,6 +49,7 @@ char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* machine dependent timer functions */
 int (*mach_set_clock_mmss)(unsigned long);
+int (*mach_hwclk) (int, struct rtc_time*);
 
 /* machine dependent reboot functions */
 void (*mach_reset)(void);
arch/m68k/kernel/time_no.c +12 -24
index 3ef0f77..ca3b3b4 100644
@@ -20,15 +20,11 @@
 #include <linux/profile.h>
 #include <linux/time.h>
 #include <linux/timex.h>
+#include <linux/rtc.h>
 
 #include <asm/machdep.h>
 #include <asm/irq_regs.h>
 
-#define	TICK_SIZE (tick_nsec / 1000)
-
-/* machine dependent timer functions */
-void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
-
 static inline int set_rtc_mmss(unsigned long nowtime)
 {
 	if (mach_set_clock_mmss)
@@ -55,28 +51,20 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 }
 #endif
 
-static unsigned long read_rtc_mmss(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-
-	if (mach_gettod) {
-		mach_gettod(&year, &mon, &day, &hour, &min, &sec);
-		if ((year += 1900) < 1970)
-			year += 100;
-	} else {
-		year = 1970;
-		mon = day = 1;
-		hour = min = sec = 0;
-	}
-
-
-	return  mktime(year, mon, day, hour, min, sec);
-}
-
 void read_persistent_clock(struct timespec *ts)
 {
-	ts->tv_sec = read_rtc_mmss();
+	struct rtc_time time;
+	ts->tv_sec = 0;
 	ts->tv_nsec = 0;
+
+	if (mach_hwclk) {
+		mach_hwclk(0, &time);
+
+		if ((time.tm_year += 1900) < 1970)
+			time.tm_year += 100;
+		ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
+			time.tm_hour, time.tm_min, time.tm_sec);
+	}
 }
 
 int update_persistent_clock(struct timespec now)
arch/m68k/platform/68328/config.c +3 -2
index d70bf26..44b8665 100644
@@ -17,6 +17,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/rtc.h>
 #include <asm/system.h>
 #include <asm/machdep.h>
 #include <asm/MC68328.h>
@@ -26,7 +27,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
+int m68328_hwclk(int set, struct rtc_time *t);
 
 /***************************************************************************/
 
@@ -48,7 +49,7 @@ void config_BSP(char *command, int len)
   printk(KERN_INFO "68328 support Kenneth Albanowski <[email protected]>\n");
   printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <[email protected]>\n");
 
-  mach_gettod = m68328_timer_gettod;
+  mach_hwclk = m68328_hwclk;
   mach_reset = m68328_reset;
 }
 
arch/m68k/platform/68328/timers.c +11 -7
index f267886..b15ddef 100644
@@ -20,6 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clocksource.h>
+#include <linux/rtc.h>
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -119,14 +120,17 @@ void hw_timer_init(void)
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec)
+int m68328_hwclk(int set, struct rtc_time *t)
 {
-	long now = RTCTIME;
-
-	*year = *mon = *day = 1;
-	*hour = (now >> 24) % 24;
-	*min = (now >> 16) % 60;
-	*sec = now % 60;
+	if (!set) {
+		long now = RTCTIME;
+		t->tm_year = t->tm_mon = t->tm_mday = 1;
+		t->tm_hour = (now >> 24) % 24;
+		t->tm_min = (now >> 16) % 60;
+		t->tm_sec = now % 60;
+	}
+
+	return 0;
 }
 
 /***************************************************************************/
arch/m68k/platform/68360/config.c +1 -7
index 9dd5bca..599a594 100644
@@ -103,11 +103,6 @@ void hw_timer_init(void)
   pquicc->timer_tgcr  = tgcr_save;
 }
 
-void BSP_gettod (int *yearp, int *monp, int *dayp,
-		   int *hourp, int *minp, int *secp)
-{
-}
-
 int BSP_set_clock_mmss(unsigned long nowtime)
 {
 #if 0
@@ -181,6 +176,5 @@ void config_BSP(char *command, int len)
   scc1_hwaddr = "\00\01\02\03\04\05";
 #endif
  
-  mach_gettod          = BSP_gettod;
-  mach_reset           = BSP_reset;
+  mach_reset = BSP_reset;
 }
arch/m68k/platform/68EZ328/config.c +3 -2
index 1be1a16..dd2c535 100644
@@ -15,6 +15,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/rtc.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/machdep.h>
@@ -25,7 +26,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
+int m68328_hwclk(int set, struct rtc_time *t);
 
 /***************************************************************************/
 
@@ -69,7 +70,7 @@ void config_BSP(char *command, int len)
   else command[0] = 0;
 #endif
  
-  mach_gettod = m68328_timer_gettod;
+  mach_hwclk = m68328_hwclk;
   mach_reset = m68ez328_reset;
 }
 
arch/m68k/platform/68VZ328/config.c +3 -2
index eabaabe..25ec673 100644
@@ -20,6 +20,7 @@
 #include <linux/netdevice.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/rtc.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -33,7 +34,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
+int m68328_hwclk(int set, struct rtc_time *t);
 
 /***************************************************************************/
 /*                        Init Drangon Engine hardware                     */
@@ -181,7 +182,7 @@ void config_BSP(char *command, int size)
 
 	init_hardware(command, size);
 
-	mach_gettod = m68328_timer_gettod;
+	mach_hwclk = m68328_hwclk;
 	mach_reset = m68vz328_reset;
 }
 
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 2/3 m68knommu: modify timer init code to make it consistent with m68k code

From: Greg Ungerer <[email protected]>

With a few small changes we can make the m68knommu timer init code the same as the m68k code. By using the mach_sched_init function pointer and reworking the current timer initializers to keep track of the common m68k timer_interrupt() handler we end up with almost identical code for m68knommu.

This will allow us to more easily merge the mmu and non-mmu m68k time.c in future patches.

---
 arch/m68k/include/asm/machdep.h        |    3 +--
 arch/m68k/kernel/setup_no.c            |    1 +
 arch/m68k/kernel/time_no.c             |    8 +++-----
 arch/m68k/platform/5206/config.c       |    1 +
 arch/m68k/platform/520x/config.c       |    1 +
 arch/m68k/platform/523x/config.c       |    1 +
 arch/m68k/platform/5249/config.c       |    1 +
 arch/m68k/platform/5272/config.c       |    1 +
 arch/m68k/platform/527x/config.c       |    1 +
 arch/m68k/platform/528x/config.c       |    1 +
 arch/m68k/platform/5307/config.c       |    1 +
 arch/m68k/platform/532x/config.c       |    2 ++
 arch/m68k/platform/5407/config.c       |    1 +
 arch/m68k/platform/54xx/config.c       |    1 +
 arch/m68k/platform/coldfire/pit.c      |    2 +-
 arch/m68k/platform/coldfire/sltimers.c |    7 +++++--
 arch/m68k/platform/coldfire/timers.c   |    7 +++++--
 17 files changed, 28 insertions(+), 12 deletions(-)
arch/m68k/include/asm/machdep.h +1 -2
index 3bfa7df..825c1c8 100644
@@ -33,9 +33,8 @@ extern void (*mach_l2_flush) (int);
 extern void (*mach_beep) (unsigned int, unsigned int);
 
 /* Hardware clock functions */
-extern void hw_timer_init(void);
+extern void hw_timer_init(irq_handler_t handler);
 extern unsigned long hw_timer_offset(void);
-extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
 
 extern void config_BSP(char *command, int len);
 
arch/m68k/kernel/setup_no.c +1 -0
index 8394b56..7dc186b 100644
@@ -48,6 +48,7 @@ EXPORT_SYMBOL(memory_end);
 char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* machine dependent timer functions */
+void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
 int (*mach_set_clock_mmss)(unsigned long);
 int (*mach_hwclk) (int, struct rtc_time*);
 
arch/m68k/kernel/time_no.c +3 -5
index ca3b3b4..5fa42f1 100644
@@ -32,12 +32,11 @@ static inline int set_rtc_mmss(unsigned long nowtime)
 	return -1;
 }
 
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "xtime_update()" routine every clocktick
  */
-irqreturn_t arch_timer_interrupt(int irq, void *dummy)
+static irqreturn_t timer_interrupt(int irq, void *dummy)
 {
 
 	if (current->pid)
@@ -49,7 +48,6 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 
 	return(IRQ_HANDLED);
 }
-#endif
 
 void read_persistent_clock(struct timespec *ts)
 {
@@ -72,7 +70,7 @@ int update_persistent_clock(struct timespec now)
 	return set_rtc_mmss(now.tv_sec);
 }
 
-void time_init(void)
+void __init time_init(void)
 {
-	hw_timer_init();
+	mach_sched_init(timer_interrupt);
 }
arch/m68k/platform/5206/config.c +1 -0
index 6fa3f80..7826b70 100644
@@ -105,6 +105,7 @@ void __init config_BSP(char *commandp, int size)
 #endif /* CONFIG_NETtel */
 
 	mach_reset = m5206_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m5206_timers_init();
 	m5206_uarts_init();
 
arch/m68k/platform/520x/config.c +1 -0
index 8a98683..61c2515 100644
@@ -291,6 +291,7 @@ static void m520x_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m520x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m520x_uarts_init();
 	m520x_fec_init();
 #if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
arch/m68k/platform/523x/config.c +1 -0
index 71f4436..aa28392 100644
@@ -274,6 +274,7 @@ static void m523x_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m523x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 }
 
 /***************************************************************************/
arch/m68k/platform/5249/config.c +1 -0
index ceb31e5..50e2d8f 100644
@@ -307,6 +307,7 @@ void m5249_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5249_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m5249_timers_init();
 	m5249_uarts_init();
 #ifdef CONFIG_M5249C3
arch/m68k/platform/5272/config.c +1 -0
index 65bb582..426e66c 100644
@@ -146,6 +146,7 @@ void __init config_BSP(char *commandp, int size)
 #endif
 
 	mach_reset = m5272_cpu_reset;
+	mach_sched_init = hw_timer_init;
 }
 
 /***************************************************************************/
arch/m68k/platform/527x/config.c +1 -0
index 3ebc769..c948a16 100644
@@ -364,6 +364,7 @@ static void m527x_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m527x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m527x_uarts_init();
 	m527x_fec_init();
 #if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
arch/m68k/platform/528x/config.c +1 -0
index 7abe77a..08f397a 100644
@@ -306,6 +306,7 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	mach_reset = m528x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m528x_uarts_init();
 	m528x_fec_init();
 #if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
arch/m68k/platform/5307/config.c +1 -0
index 00900ac..6bf7c1c 100644
@@ -115,6 +115,7 @@ void __init config_BSP(char *commandp, int size)
 #endif
 
 	mach_reset = m5307_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m5307_timers_init();
 	m5307_uarts_init();
 
arch/m68k/platform/532x/config.c +2 -0
index ca51323..3558a62 100644
@@ -263,6 +263,8 @@ void __init config_BSP(char *commandp, int size)
 	}
 #endif
 
+	mach_sched_init = hw_timer_init;
+
 #ifdef CONFIG_BDM_DISABLE
 	/*
 	 * Disable the BDM clocking.  This also turns off most of the rest of
arch/m68k/platform/5407/config.c +1 -0
index 70ea789..4861be6 100644
@@ -99,6 +99,7 @@ void m5407_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5407_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m5407_timers_init();
 	m5407_uarts_init();
 
arch/m68k/platform/54xx/config.c +1 -0
index ee04354..8282ef1 100644
@@ -145,6 +145,7 @@ void __init config_BSP(char *commandp, int size)
 	mmu_context_init();
 #endif
 	mach_reset = mcf54xx_reset;
+	mach_sched_init = hw_timer_init;
 	m54xx_uarts_init();
 }
 
arch/m68k/platform/coldfire/pit.c +1 -1
index 02663d2..e62dbbc 100644
@@ -149,7 +149,7 @@ static struct clocksource pit_clk = {
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
 	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
arch/m68k/platform/coldfire/sltimers.c +5 -2
index 54e1452..2027fc2 100644
@@ -81,12 +81,14 @@ void mcfslt_profile_init(void)
 static u32 mcfslt_cycles_per_jiffy;
 static u32 mcfslt_cnt;
 
+static irq_handler_t timer_interrupt;
+
 static irqreturn_t mcfslt_tick(int irq, void *dummy)
 {
 	/* Reset Slice Timer 0 */
 	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
 	mcfslt_cnt += mcfslt_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 static struct irqaction mcfslt_timer_irq = {
@@ -121,7 +123,7 @@ static struct clocksource mcfslt_clk = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
 	/*
@@ -136,6 +138,7 @@ void hw_timer_init(void)
 	/* initialize mcfslt_cnt knowing that slice timers count down */
 	mcfslt_cnt = mcfslt_cycles_per_jiffy;
 
+	timer_interrupt = handler;
 	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
 
 	clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
arch/m68k/platform/coldfire/timers.c +5 -2
index 0d90da3..d0b4e97 100644
@@ -47,6 +47,8 @@ void coldfire_profile_init(void);
 static u32 mcftmr_cycles_per_jiffy;
 static u32 mcftmr_cnt;
 
+static irq_handler_t timer_interrupt;
+
 /***************************************************************************/
 
 static irqreturn_t mcftmr_tick(int irq, void *dummy)
@@ -55,7 +57,7 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
 	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
 
 	mcftmr_cnt += mcftmr_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 /***************************************************************************/
@@ -94,7 +96,7 @@ static struct clocksource mcftmr_clk = {
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
 	mcftmr_cycles_per_jiffy = FREQ / HZ;
@@ -110,6 +112,7 @@ void hw_timer_init(void)
 
 	clocksource_register_hz(&mcftmr_clk, FREQ);
 
+	timer_interrupt = handler;
 	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
 
 #ifdef CONFIG_HIGHPROFILE
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 3/3 m68k: merge mmu and non-mmu versions of time.c

In reply to [email protected]

From: Greg Ungerer <[email protected]>

There is only trivial differences between the mmu time_mm.c and non-mmu time_no.c files. Merge them back into a single time.c.

---
 arch/m68k/kernel/time.c    |  128 ++++++++++++++++++++++++++++++++++++++++++--
 arch/m68k/kernel/time_mm.c |  114 ---------------------------------------
 arch/m68k/kernel/time_no.c |   76 --------------------------
 3 files changed, 123 insertions(+), 195 deletions(-)
 delete mode 100644 arch/m68k/kernel/time_mm.c
 delete mode 100644 arch/m68k/kernel/time_no.c
arch/m68k/kernel/time.c +123 -5
index 75ab79b..1bb9ddf 100644
@@ -1,5 +1,123 @@
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-#include "time_mm.c"
-#else
-#include "time_no.c"
-#endif
+/*
+ *  linux/arch/m68k/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *
+ * This file contains the m68k-specific time handling details.
+ * Most of the stuff is located in the machine specific files.
+ *
+ * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
+ *		"A Kernel Model for Precision Timekeeping" by Dave Mills
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/irq_regs.h>
+
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/profile.h>
+
+static inline int set_rtc_mmss(unsigned long nowtime)
+{
+  if (mach_set_clock_mmss)
+    return mach_set_clock_mmss (nowtime);
+  return -1;
+}
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "xtime_update()" routine every clocktick
+ */
+static irqreturn_t timer_interrupt(int irq, void *dummy)
+{
+	xtime_update(1);
+	update_process_times(user_mode(get_irq_regs()));
+	profile_tick(CPU_PROFILING);
+
+#ifdef CONFIG_HEARTBEAT
+	/* use power LED as a heartbeat instead -- much more useful
+	   for debugging -- based on the version for PReP by Cort */
+	/* acts like an actual heart beat -- ie thump-thump-pause... */
+	if (mach_heartbeat) {
+	    static unsigned cnt = 0, period = 0, dist = 0;
+
+	    if (cnt == 0 || cnt == dist)
+		mach_heartbeat( 1 );
+	    else if (cnt == 7 || cnt == dist+7)
+		mach_heartbeat( 0 );
+
+	    if (++cnt > period) {
+		cnt = 0;
+		/* The hyperbolic function below modifies the heartbeat period
+		 * length in dependency of the current (5min) load. It goes
+		 * through the points f(0)=126, f(1)=86, f(5)=51,
+		 * f(inf)->30. */
+		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
+		dist = period / 4;
+	    }
+	}
+#endif /* CONFIG_HEARTBEAT */
+	return IRQ_HANDLED;
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+	struct rtc_time time;
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
+
+	if (mach_hwclk) {
+		mach_hwclk(0, &time);
+
+		if ((time.tm_year += 1900) < 1970)
+			time.tm_year += 100;
+		ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
+				      time.tm_hour, time.tm_min, time.tm_sec);
+	}
+}
+
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}
+
+void __init time_init(void)
+{
+	mach_sched_init(timer_interrupt);
+}
+
+#ifdef CONFIG_M68KCLASSIC
+
+u32 arch_gettimeoffset(void)
+{
+	return mach_gettimeoffset() * 1000;
+}
+
+static int __init rtc_init(void)
+{
+	struct platform_device *pdev;
+
+	if (!mach_hwclk)
+		return -ENODEV;
+
+	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+
+module_init(rtc_init);
+
+#endif /* CONFIG_M68KCLASSIC */
arch/m68k/kernel/time_mm.c deleted +0 -114

114 lines not on this page · raw message

arch/m68k/kernel/time_no.c deleted +0 -76

76 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#3 lore raw

Re: [PATCH 3/3] m68k: merge mmu and non-mmu versions of time.c

arch/m68k/kernel/time.c line 93

Quoted 4 lines · On Tue, Feb 7, 2012 at 04:09, <[email protected]> wrote:
arch/m68k/kernel/time.c +4 -0
+int update_persistent_clock(struct timespec now)
+{
+       return set_rtc_mmss(now.tv_sec);
+}

This adds update_persistent_clock() for MMU, which was not present before. It's only called if CONFIG_GENERIC_CMOS_UPDATE is set, but arch/m68k/Kconfig has:

config GENERIC_CMOS_UPDATE
def_bool !MMU

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

#4 lore raw

Re: [PATCH 3/3] m68k: merge mmu and non-mmu versions of time.c

Hi Geert,

Quoted 10 lines · Geert Uytterhoeven

arch/m68k/kernel/time.c line 93

Quoted 4 lines · On Tue, Feb 7, 2012 at 04:09,<[email protected]> wrote:
arch/m68k/kernel/time.c +4 -0
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}

This adds update_persistent_clock() for MMU, which was not present before. It's only called if CONFIG_GENERIC_CMOS_UPDATE is set, but arch/m68k/Kconfig has:

Quoted 2 lines

config GENERIC_CMOS_UPDATE
def_bool !MMU

Yep. Again I was trying to just have fewer #ifdefs.

But looking at this further, I don't think there is any point having CONFIG_GENERIC_CMOS_UPDATE defined for the non-MMU case. The code for update_persistent_clock() calls set_rtc_mmss() which relies on the sub-arch code having set mach_set_clock_mmss to do the real work. But that is not set for any non-MMU code paths. Seems like we can remove it for everyone m68k type. Or did I miss something :-)

Regards
Greg

------------------------------------------------------------------------

Greg Ungerer  --  Principal Engineer        EMAIL:     [email protected]
SnapGear Group, McAfee                      PHONE:       +61 7 3435 2888
8 Gardner Close                             FAX:         +61 7 3217 5323
Milton, QLD, 4064, Australia                WEB: http://www.SnapGear.com