Skip to contentSkip to conversation

ALSA: snd-usb: tighten EP_FLAG_RUNNING checks

PATCH In review Daniel Mack 3 participants 10 messages Jul 12, 2012 – Jul 13, 2012 1 message not in the archive Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ALSA: snd-usb: tighten EP_FLAG_RUNNING checks

In endpoint.c, bail out earlier in case the stream is stopped. Also clear the flag from deactivate_urbs() in case the chip's shutdown flag is set.

---
 sound/usb/endpoint.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
sound/usb/endpoint.c +4 -3
index e690690..a75bdf4 100644
@@ -350,7 +350,8 @@ static void snd_complete_urb(struct urb *urb)
 		     urb->status == -ENODEV ||		/* device removed */
 		     urb->status == -ECONNRESET ||	/* unlinked */
 		     urb->status == -ESHUTDOWN ||	/* device disabled */
-		     ep->chip->shutdown))		/* device disconnected */
+		     ep->chip->shutdown) ||		/* device disconnected */
+		     !test_bit(EP_FLAG_RUNNING, &ep->flags))
 		goto exit_clear;
 
 	if (usb_pipeout(ep->pipe)) {
@@ -522,13 +523,13 @@ static int deactivate_urbs(struct snd_usb_endpoint *ep, int force, int can_sleep
 	unsigned int i;
 	int async;
 
+	clear_bit(EP_FLAG_RUNNING, &ep->flags);
+
 	if (!force && ep->chip->shutdown) /* to be sure... */
 		return -EBADFD;
 
 	async = !can_sleep && ep->chip->async_unlink;
 
-	clear_bit(EP_FLAG_RUNNING, &ep->flags);
-
 	INIT_LIST_HEAD(&ep->ready_playback_urbs);
 	ep->next_packet_read_pos = 0;
 	ep->next_packet_write_pos = 0;
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 2/2 ALSA: snd-usb: move calls to usb_set_interface

The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams.

Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected.

---
 sound/usb/endpoint.c |   73 +++++---------------------------------------------
 sound/usb/pcm.c      |   55 ++++++++++++++++++++++---------------
 2 files changed, 39 insertions(+), 89 deletions(-)
sound/usb/endpoint.c +6 -67
index a75bdf4..4bc5778 100644
@@ -415,7 +415,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 {
 	struct list_head *p;
 	struct snd_usb_endpoint *ep;
-	int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
+	int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
 
 	mutex_lock(&chip->mutex);
 
@@ -435,16 +435,6 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 		    type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
 		    ep_num);
 
-	/* select the alt setting once so the endpoints become valid */
-	ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber,
-				alts->desc.bAlternateSetting);
-	if (ret < 0) {
-		snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-					__func__, ret);
-		ep = NULL;
-		goto __exit_unlock;
-	}
-
 	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
 	if (!ep)
 		goto __exit_unlock;
@@ -832,9 +822,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (++ep->use_count != 1)
 		return 0;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return -EINVAL;
-
 	/* just to be sure */
 	deactivate_urbs(ep, 0, 1);
 	wait_clear_urbs(ep);
@@ -912,9 +899,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 	if (snd_BUG_ON(ep->use_count == 0))
 		return;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return;
-
 	if (--ep->use_count == 0) {
 		deactivate_urbs(ep, force, can_sleep);
 		ep->data_subs = NULL;
@@ -928,42 +912,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 }
 
 /**
- * snd_usb_endpoint_activate: activate an snd_usb_endpoint
- *
- * @ep: the endpoint to activate
- *
- * If the endpoint is not currently in use, this functions will select the
- * correct alternate interface setting for the interface of this endpoint.
- *
- * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
- */
-int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)
-{
-	if (ep->use_count != 0)
-		return 0;
-
-	if (!ep->chip->shutdown &&
-	    !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
-			return ret;
-		}
-
-		return 0;
-	}
-
-	return -EBUSY;
-}
-
-/**
  * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
  *
  * @ep: the endpoint to deactivate
@@ -981,24 +929,15 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
 	if (!ep)
 		return -EINVAL;
 
+	deactivate_urbs(ep, 1, 1);
+	wait_clear_urbs(ep);
+
 	if (ep->use_count != 0)
 		return 0;
 
-	if (!ep->chip->shutdown &&
-	    test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, 0);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			return ret;
-		}
+	clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
 
-		return 0;
-	}
-
-	return -EBUSY;
+	return 0;
 }
 
 /**
sound/usb/pcm.c +33 -22

92 lines not on this page · raw message

Signature · 1 line
1.7.10.4
#2 lore raw

Re: [PATCH 2/2] ALSA: snd-usb: move calls to usb_set_interface

At Thu, 12 Jul 2012 15:19:47 +0200,

Quoted 6 lines · Daniel Mack

The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams.

Quoted 8 lines

Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected.

Looks like the patch contains lots of coding-style issues. Could you fix what checkpatch.pl compains and resubmit?

thanks,

Takashi

Quoted 232 lines
---
 sound/usb/endpoint.c |   73 +++++---------------------------------------------
 sound/usb/pcm.c      |   55 ++++++++++++++++++++++---------------
 2 files changed, 39 insertions(+), 89 deletions(-)
sound/usb/endpoint.c +6 -67
index a75bdf4..4bc5778 100644
@@ -415,7 +415,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 {
 	struct list_head *p;
 	struct snd_usb_endpoint *ep;
-	int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
+	int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
 
 	mutex_lock(&chip->mutex);
 
@@ -435,16 +435,6 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 		    type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
 		    ep_num);
 
-	/* select the alt setting once so the endpoints become valid */
-	ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber,
-				alts->desc.bAlternateSetting);
-	if (ret < 0) {
-		snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-					__func__, ret);
-		ep = NULL;
-		goto __exit_unlock;
-	}
-
 	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
 	if (!ep)
 		goto __exit_unlock;
@@ -832,9 +822,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (++ep->use_count != 1)
 		return 0;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return -EINVAL;
-
 	/* just to be sure */
 	deactivate_urbs(ep, 0, 1);
 	wait_clear_urbs(ep);
@@ -912,9 +899,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 	if (snd_BUG_ON(ep->use_count == 0))
 		return;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return;
-
 	if (--ep->use_count == 0) {
 		deactivate_urbs(ep, force, can_sleep);
 		ep->data_subs = NULL;
@@ -928,42 +912,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 }
 
 /**
- * snd_usb_endpoint_activate: activate an snd_usb_endpoint
- *
- * @ep: the endpoint to activate
- *
- * If the endpoint is not currently in use, this functions will select the
- * correct alternate interface setting for the interface of this endpoint.
- *
- * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
- */
-int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)
-{
-	if (ep->use_count != 0)
-		return 0;
-
-	if (!ep->chip->shutdown &&
-	    !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
-			return ret;
-		}
-
-		return 0;
-	}
-
-	return -EBUSY;
-}
-
-/**
  * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
  *
  * @ep: the endpoint to deactivate
@@ -981,24 +929,15 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
 	if (!ep)
 		return -EINVAL;
 
+	deactivate_urbs(ep, 1, 1);
+	wait_clear_urbs(ep);
+
 	if (ep->use_count != 0)
 		return 0;
 
-	if (!ep->chip->shutdown &&
-	    test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, 0);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			return ret;
-		}
+	clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
 
-		return 0;
-	}
-
-	return -EBUSY;
+	return 0;
 }
 
 /**
sound/usb/pcm.c +33 -22
index f0ede13..26778a9 100644
@@ -261,19 +261,6 @@ static void stop_endpoints(struct snd_usb_substream *subs,
 				      force, can_sleep, wait);
 }
 
-static int activate_endpoints(struct snd_usb_substream *subs)
-{
-	if (subs->sync_endpoint) {
-		int ret;
-
-		ret = snd_usb_endpoint_activate(subs->sync_endpoint);
-		if (ret < 0)
-			return ret;
-	}
-
-	return snd_usb_endpoint_activate(subs->data_endpoint);
-}
-
 static int deactivate_endpoints(struct snd_usb_substream *subs)
 {
 	int reta, retb;
@@ -314,6 +301,31 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
 	if (fmt == subs->cur_audiofmt)
 		return 0;
 
+        /* close the old interface */
+        if (subs->interface >= 0 && subs->interface != fmt->iface) {
+                err = usb_set_interface(subs->dev, subs->interface, 0);
+		if (err < 0) {
+                        snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n",
+                                dev->devnum, fmt->iface, fmt->altsetting, err);
+                        return -EIO;
+                }
+                subs->interface = -1;
+                subs->altset_idx = 0;
+        }
+
+        /* set interface */
+        if (subs->interface != fmt->iface || subs->altset_idx != fmt->altset_idx) {
+                err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
+		if (err < 0) {
+                        snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n",
+                                   dev->devnum, fmt->iface, fmt->altsetting, err);
+                        return -EIO;
+                }
+                snd_printdd(KERN_INFO "setting usb interface %d:%d\n", fmt->iface, fmt->altsetting);
+                subs->interface = fmt->iface;
+                subs->altset_idx = fmt->altset_idx;
+        }
+
 	subs->data_endpoint = snd_usb_add_endpoint(subs->stream->chip,
 						   alts, fmt->endpoint, subs->direction,
 						   SND_USB_ENDPOINT_TYPE_DATA);
@@ -460,12 +472,6 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
 		mutex_lock(&subs->stream->chip->shutdown_mutex);
 		/* format changed */
 		stop_endpoints(subs, 0, 0, 0);
-		deactivate_endpoints(subs);
-
-		ret = activate_endpoints(subs);
-		if (ret < 0)
-			goto unlock;
-
 		ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt,
 						  subs->sync_endpoint);
 		if (ret < 0)
@@ -500,6 +506,7 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream)
 	subs->period_bytes = 0;
 	mutex_lock(&subs->stream->chip->shutdown_mutex);
 	stop_endpoints(subs, 0, 1, 1);
+	deactivate_endpoints(subs);
 	mutex_unlock(&subs->stream->chip->shutdown_mutex);
 	return snd_pcm_lib_free_vmalloc_buffer(substream);
 }
@@ -938,16 +945,20 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream, int direction)
 
 static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction)
 {
-	int ret;
 	struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
 	struct snd_usb_substream *subs = &as->substream[direction];
 
 	stop_endpoints(subs, 0, 0, 0);
-	ret = deactivate_endpoints(subs);
+
+        if (!as->chip->shutdown && subs->interface >= 0) {
+                usb_set_interface(subs->dev, subs->interface, 0);
+                subs->interface = -1;
+        }
+
 	subs->pcm_substream = NULL;
 	snd_usb_autosuspend(subs->stream->chip);
 
-	return ret;
+	return 0;
 }
 
 /* Since a URB can handle only a single linear buffer, we must use double
Signature · 1 line
1.7.10.4
#3 lore raw

Re: [PATCH 2/2] ALSA: snd-usb: move calls to usb_set_interface

Quoted 13 lines · Takashi Iwai

At Thu, 12 Jul 2012 15:19:47 +0200,

Quoted 11 lines · Daniel Mack

The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams.

Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected.

Quoted 6 lines
Quoted 3 lines

Looks like the patch contains lots of coding-style issues. Could you fix what checkpatch.pl compains and resubmit?

Oops, sorry. Was working on a different machine for this, hence I didn't notice.

Daniel

Quoted 1 line

From 6b62323f3d7a28fdeece03dd40a2eb66d0f8b9dd Mon Sep 17 00:00:00 2001

From: Daniel Mack <[email protected]>
Date: Thu, 12 Jul 2012 13:08:40 +0200
Subject: [PATCH v2] ALSA: snd-usb: move calls to usb_set_interface

The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams.

Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected.

---
 sound/usb/endpoint.c |   73 +++++---------------------------------------------
 sound/usb/pcm.c      |   57 ++++++++++++++++++++++++---------------
 2 files changed, 41 insertions(+), 89 deletions(-)
sound/usb/endpoint.c +6 -67
index a75bdf4..4bc5778 100644
@@ -415,7 +415,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 {
 	struct list_head *p;
 	struct snd_usb_endpoint *ep;
-	int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
+	int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
 
 	mutex_lock(&chip->mutex);
 
@@ -435,16 +435,6 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 		    type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
 		    ep_num);
 
-	/* select the alt setting once so the endpoints become valid */
-	ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber,
-				alts->desc.bAlternateSetting);
-	if (ret < 0) {
-		snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-					__func__, ret);
-		ep = NULL;
-		goto __exit_unlock;
-	}
-
 	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
 	if (!ep)
 		goto __exit_unlock;
@@ -832,9 +822,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (++ep->use_count != 1)
 		return 0;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return -EINVAL;
-
 	/* just to be sure */
 	deactivate_urbs(ep, 0, 1);
 	wait_clear_urbs(ep);
@@ -912,9 +899,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 	if (snd_BUG_ON(ep->use_count == 0))
 		return;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return;
-
 	if (--ep->use_count == 0) {
 		deactivate_urbs(ep, force, can_sleep);
 		ep->data_subs = NULL;
@@ -928,42 +912,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 }
 
 /**
- * snd_usb_endpoint_activate: activate an snd_usb_endpoint
- *
- * @ep: the endpoint to activate
- *
- * If the endpoint is not currently in use, this functions will select the
- * correct alternate interface setting for the interface of this endpoint.
- *
- * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
- */
-int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)
-{
-	if (ep->use_count != 0)
-		return 0;
-
-	if (!ep->chip->shutdown &&
-	    !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
-			return ret;
-		}
-
-		return 0;
-	}
-
-	return -EBUSY;
-}
-
-/**
  * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
  *
  * @ep: the endpoint to deactivate
@@ -981,24 +929,15 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
 	if (!ep)
 		return -EINVAL;
 
+	deactivate_urbs(ep, 1, 1);
+	wait_clear_urbs(ep);
+
 	if (ep->use_count != 0)
 		return 0;
 
-	if (!ep->chip->shutdown &&
-	    test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, 0);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			return ret;
-		}
+	clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
 
-		return 0;
-	}
-
-	return -EBUSY;
+	return 0;
 }
 
 /**
sound/usb/pcm.c +35 -22

94 lines not on this page · raw message

Signature · 1 line
1.7.10.4
#4 lore raw

Re: [PATCH 2/2] ALSA: snd-usb: move calls to usb_set_interface

At Fri, 13 Jul 2012 08:08:26 +0200,

Quoted 19 lines · Daniel Mack
Quoted 17 lines · Takashi Iwai

At Thu, 12 Jul 2012 15:19:47 +0200,

Quoted 14 lines · Daniel Mack

The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams.

Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected.

Quoted 5 lines
Quoted 2 lines

Looks like the patch contains lots of coding-style issues. Could you fix what checkpatch.pl compains and resubmit?

Oops, sorry. Was working on a different machine for this, hence I didn't notice.

Applied now. Thanks.

Takashi

#5 lore raw
In reply to Daniel Mack

sound/usb/endpoint.c static void snd_complete_urb(struct urb *urb) · line 355

Quoted 10 lines · Daniel Mack

In endpoint.c, bail out earlier in case the stream is stopped.
...

sound/usb/endpoint.c +2 -1
@@ -350,7 +350,8 @@ static void snd_complete_urb(struct urb *urb)
 		     urb->status == -ENODEV ||		/* device removed */
 		     urb->status == -ECONNRESET ||	/* unlinked */
 		     urb->status == -ESHUTDOWN ||	/* device disabled */
-		     ep->chip->shutdown))		/* device disconnected */
+		     ep->chip->shutdown) ||		/* device disconnected */
+		     !test_bit(EP_FLAG_RUNNING, &ep->flags))
 		goto exit_clear;

Is this really needed?
The URBs will be unlinked at the same time.

Regards,
Clemens

#6 lore raw

Hi Clemens,

Quoted 14 lines · Clemens Ladisch

sound/usb/endpoint.c static void snd_complete_urb(struct urb *urb) · line 355

Quoted 10 lines · Daniel Mack

In endpoint.c, bail out earlier in case the stream is stopped.
...

sound/usb/endpoint.c +2 -1
@@ -350,7 +350,8 @@ static void snd_complete_urb(struct urb *urb)
 		     urb->status == -ENODEV ||		/* device removed */
 		     urb->status == -ECONNRESET ||	/* unlinked */
 		     urb->status == -ESHUTDOWN ||	/* device disabled */
-		     ep->chip->shutdown))		/* device disconnected */
+		     ep->chip->shutdown) ||		/* device disconnected */
+		     !test_bit(EP_FLAG_RUNNING, &ep->flags))
 		goto exit_clear;

Is this really needed?
The URBs will be unlinked at the same time.

This just brings the code in sync with what we had before. If URBs are just unlinked but not killed, they will return with data payload, and in case of implicit feedback streams, the retire code could issue new output packets. Might be I overlooked a reason why that could never happen, but even if I did, the check here doesn't hurt, right?

Daniel

#7 lore raw
Quoted 16 lines · Daniel Mack
Quoted 14 lines · Clemens Ladisch

sound/usb/endpoint.c static void snd_complete_urb(struct urb *urb) · line 355

Quoted 10 lines · Daniel Mack

In endpoint.c, bail out earlier in case the stream is stopped.
...

sound/usb/endpoint.c +2 -1
@@ -350,7 +350,8 @@ static void snd_complete_urb(struct urb *urb)
 		     urb->status == -ENODEV ||		/* device removed */
 		     urb->status == -ECONNRESET ||	/* unlinked */
 		     urb->status == -ESHUTDOWN ||	/* device disabled */
-		     ep->chip->shutdown))		/* device disconnected */
+		     ep->chip->shutdown) ||		/* device disconnected */
+		     !test_bit(EP_FLAG_RUNNING, &ep->flags))
 		goto exit_clear;

Is this really needed?
The URBs will be unlinked at the same time.

Quoted 4 lines

This just brings the code in sync with what we had before. If URBs are just unlinked but not killed, they will return with data payload, and in case of implicit feedback streams, the retire code could issue new output packets.

And is that bad?

The EP_FLAG_RUNNING bit is cleared immediately before the URBs are unlinked, and some URB could have been completed regularly immediately before that. So if there is any case where the additional test_bit() call prevents submitting a new playback packet, there is another similar case where you've just got such a playback packet anyway.

In other words: if that test_bit() call were necessary to protect against something bad, it wouldn't be sufficient.

The driver ensures that (implicit feedback) playback URBs are unlinked only after the corresponding capture URBs have been completely killed, doesn't it?

Regards,
Clemens

#8 lore raw
Quoted 30 lines · Clemens Ladisch
Quoted 16 lines · Daniel Mack
Quoted 14 lines · Clemens Ladisch

sound/usb/endpoint.c static void snd_complete_urb(struct urb *urb) · line 355

Quoted 10 lines · Daniel Mack

In endpoint.c, bail out earlier in case the stream is stopped.
...

sound/usb/endpoint.c +2 -1
@@ -350,7 +350,8 @@ static void snd_complete_urb(struct urb *urb)
 		     urb->status == -ENODEV ||		/* device removed */
 		     urb->status == -ECONNRESET ||	/* unlinked */
 		     urb->status == -ESHUTDOWN ||	/* device disabled */
-		     ep->chip->shutdown))		/* device disconnected */
+		     ep->chip->shutdown) ||		/* device disconnected */
+		     !test_bit(EP_FLAG_RUNNING, &ep->flags))
 		goto exit_clear;

Is this really needed?
The URBs will be unlinked at the same time.

Quoted 4 lines

This just brings the code in sync with what we had before. If URBs are just unlinked but not killed, they will return with data payload, and in case of implicit feedback streams, the retire code could issue new output packets.

And is that bad?

The EP_FLAG_RUNNING bit is cleared immediately before the URBs are unlinked, and some URB could have been completed regularly immediately before that. So if there is any case where the additional test_bit() call prevents submitting a new playback packet, there is another similar case where you've just got such a playback packet anyway.

Quoted 6 lines

In other words: if that test_bit() call were necessary to protect against something bad, it wouldn't be sufficient.

The driver ensures that (implicit feedback) playback URBs are unlinked only after the corresponding capture URBs have been completely killed, doesn't it?

You're right. Especially because sending out packets in implicit feedback mode happens from queue_pending_output_urbs() which has an extra chip.

So we can drop the whole patch then. Thanks for the review!

Daniel

A message that is not in the archive (sent off-list or not yet received): [email protected]

#10 lore raw
Quoted 50 lines · Joseph Salisbury
Quoted 38 lines · Daniel Mack
Quoted 30 lines · Clemens Ladisch
Quoted 16 lines · Daniel Mack
Quoted 14 lines · Clemens Ladisch

sound/usb/endpoint.c static void snd_complete_urb(struct urb *urb) · line 355

Quoted 10 lines · Daniel Mack

In endpoint.c, bail out earlier in case the stream is stopped.
...

sound/usb/endpoint.c +2 -1
@@ -350,7 +350,8 @@ static void snd_complete_urb(struct urb *urb)
 		     urb->status == -ENODEV ||		/* device removed */
 		     urb->status == -ECONNRESET ||	/* unlinked */
 		     urb->status == -ESHUTDOWN ||	/* device disabled */
-		     ep->chip->shutdown))		/* device disconnected */
+		     ep->chip->shutdown) ||		/* device disconnected */
+		     !test_bit(EP_FLAG_RUNNING, &ep->flags))
 		goto exit_clear;

Is this really needed?
The URBs will be unlinked at the same time.

Quoted 4 lines

This just brings the code in sync with what we had before. If URBs are just unlinked but not killed, they will return with data payload, and in case of implicit feedback streams, the retire code could issue new output packets.

And is that bad?

The EP_FLAG_RUNNING bit is cleared immediately before the URBs are unlinked, and some URB could have been completed regularly immediately before that. So if there is any case where the additional test_bit() call prevents submitting a new playback packet, there is another similar case where you've just got such a playback packet anyway.

Quoted 6 lines

In other words: if that test_bit() call were necessary to protect against something bad, it wouldn't be sufficient.

The driver ensures that (implicit feedback) playback URBs are unlinked only after the corresponding capture URBs have been completely killed, doesn't it?

Quoted 8 lines

You're right. Especially because sending out packets in implicit feedback mode happens from queue_pending_output_urbs() which has an extra chip.

So we can drop the whole patch then. Thanks for the review!

Daniel

Hi Daniel,

Quoted 8 lines

I tested without your first patch. I'm not sure why, but dropping the first patch(ALSA: snd-usb: tighten EP_FLAG_RUNNING checks) causes a long delay, about 30 seconds, during bootup of an ubuntu system.

During the delay, I am able to enter my password, but the system seems to be doing something in the background, slowing the login process.

I confirmed that adding the patch back causes the delay to go away.

That really sounds odd and totally unrelated. Is there any message in dmesg that looks suspicious? Otherwise, I would ask you to test again. Could be it was caused by something that runs on every n'th boot or so.

Daniel